|IPV-MUX-S
|IP Gateway
| IPV-MUX-S
IP Gateway
VT100 Control Port
| Can be accessed via
local terminal
| Can be accessed via
SNMP
Line Ports
| 10/100BaseT Ethernet auto-negotiation
| Fiber Optic Module, 100BaseFX
|1300nm Multimode LED
|1300nm Singlemode Laser
|1550nm Singlemode Laser
Interface Modules
| G.703 E1/T1, RJ45
| RS530, DB-25
| V.35, Winchester Plug
| X.21, DB-15
|2
| IPV-MUX-S
Technical features
| X.21, V.35, G.703 or RS530 interfaces
| Any data rate from n x 56/64 kbps up to 1.544/2.048
Mbps can be transmitted
| Always works in pairs, i.e. the demultiplexing has to be
done by another IPV-MUX-M or IPV-MUX-S
| Transparent transmission of user data over the line
interface(s)
| Devices can be cascaded to increase the number of
interfaces
|3
| IPV-MUX-S
Management interfaces
| Integrated SNMP management
| V.24 interface for VT-100 console
| Modem interface for remote maintenance via
dial-up connection
|4
| IPV-MUX-S
Mounting possibility
| Standalone unit
| Dimensions: 44 x 259 x 250 mm (H x W x D)
| Power Supply: 100-240 V AC, or -48 V DC
|5
| IPV-MUX-S
Connecting PBXs and data networks over an existing IP network
PBX
PBX
IPV-MUX-S
IPV-MUX-S
Router or Switch
LAN
IP-Network
LAN
The IPV-MUX-S can also connect PBXs and local area networks over
an existing IP network. This requires each PBX to be connected to an
E1/T1 port of a IPV multiplexer and the local area networks to one of
the Ethernet ports. The second Ethernet port is then connected to the
company wide IP network.
|6
| IPV-MUX-S
|
Possible applications
Point-to-point and point-to-multipoint connections can be
created, also via optical fiber
• The IPV-MUX-S can simultaneously transfer up to 2.048 Mbps of
serial data. An optional fiber-optic connection can be configured for
backup or multi-drop applications
|
Connecting PBXs and data networks over an existing IP
network
• The IPV-MUX-S can also connect PBXs and local area networks
over an existing IP network. This requires each PBX to be
connected to the E1/T1 port of an IPV-MUX multiplexer and the
local area networks to one of the Ethernet ports. The second
Ethernet port is then connected to the company wide IP network
|
|
Also meshed networks can be created with IPV-Muxes
Circuit Extension over IP – Generic Enterprise
Application
|7
| IPV-MUX-S
Point-to-point connections over optical fiber
PBX
IPV-MUX-S
PBX
LAN
Fiber optic
IPV-MUX-S
LAN
The IPV-MUX-S can simultaneously transfer up to 1x 2.048 Mbit/s
of serial data and about 90 Mbit/s of Ethernet data.
|8
| IPV-MUX-S
IPV-MUX-S and IPV-MUX-M in a carrier network and as access device in a free
space optic application
|9
| IPV-MUX-S
Customer benefits
| Save on access costs:
No need for more leased lines
| Save on equipment costs:
No need to replace legacy equipment
| Save on operating costs:
No need to replace the data infrastructure
| 10
| IPV-MUX-S
Orderkey
| 11