File

advertisement
STEPS INVOLVED IN THE
WINDING OF A FAN
The following things must be kept in mind while
choosing a fan for winding
CHOOSING A FAN
we have different types of fans, but we
wanted to go for a simplest one.
Therefore we consulted a technicians and
he guided us that ceiling fan could be the
best for winding . So we chose ceiling fan
for winding.
STEP 2
LEARNING WINDING
Fan winding is such a thing you can't
do it of yourselves. It involves some
technical, steps where you would work
with different electric devices.
We consulted a technician in Golimar he
taught us fan winding in a very easy way.
STEP 3
HOW WINDING IS DONE?
Fan winding needs your technical skills, if you
are good at work you can learn winding at least
in one week
We bought a fan (not in working condition) and
the technician opened and told us the basic
steps taken for fan winding.
the technician opened and repaired the fan by
using different tools and at last the fan was
running
Then we started by our own and it took two
days for us to make the fan running.
WINDING STEPS
First of all you would find the no of turns in the coil
by counting one by one, if you are expert you can
guess it.
Then you would make coils according to the no of
turns.
Insulate the in the stator holes with a paper to
avoid the contact of coil with the stator.
Now place the coils one by one on the stator
The process of placing coils is done for both starting
and running winding.
After the completion of placing coils you would
give connection of coils in both windings.
In last you would leave four wires, two of them
are connected with each other which is known as
common.
Then a series board is used for testing the
winding , if it is not short circuited a bulb glow
and other steps are done on the winding.
The starting winding is now connected with
capacitor and the running winding is directly
connected with main supply.
Then the capacitor is connected with main supply.
After the connections the fan is closed
and is connected with the main supply.
If the fan is moving in anti clockwise
direction, then it’s connections are
reversed.
Anticlockwise movement is useless
because it takes air towards the ceiling.
STEP 4
HOICE OF WIRE FOR WINDING
Winding can be done with any
conductor , we chose silver because it
was not much expensive.
You will spend 200 rupees for silver. If
you want to do winding with copper
you need to spend more than 500
rupees
A FAN CONSISTS OF THE FOLLOWING PARTS
PARTS
HANGER
STATOR
ROTOR
FUNCTION
It is support of a fan with ceiling.
It is stationary part which keeps
the fan hanging.
Winding is done on rotor which
enables the fan to rotate.
It is the part of fan which rotates
around the rotor.
CAPACITOR
WINGS
The function of capacitor is
to give a phase difference,
due to which a magnetic
field is induced which moves
the fan.
Wings of a fan pushes the
air around it to all parts of a
room.
CAPACITANCE
3.5 micro farad
VOLTAGE RATING
220>
BALL BERARING SIZE 10
WIRE GUAGE NO
31 GUAGE
NO OF TURNS IN RUNNING 500
COIL
NO OF TURNS IN
STARTING COIL
600
RPM
340
FREQUENCY
50/60 CYCLES
INPUT VOLTAGE
220 VOLTS
ROTOR SIZE
SLIPS
2 NO
SLIPS
1 NO
Download