Renewable Energy as Priority
AC
Input
AC / DC
Charger
Solar
Charger
Wind
Charger
ATS
Inverter
AC
Output

Grid, Solar PV & Wind Hybrid Systems
ATS
AC
Input
AC / DC
Charger
Solar
Charger
Inverter
Wind
Charger
AC
Output

Parallel Operation
Virtually unlimited power thanks to parallel operation up to 5 units can operate in parallel to achieve higher power output. Five CP-6000-48 units , for example, provide
30KW of output power.
Three Phase Capability
In addition to parallel connection, three units of the same model can be configured for three-phase output .
But that’s not all: up to five sets of three units can be parallel connected for a huge 90KW inverter!

Max 5 units for one phase, and 15 units for three phases

R
S
T
18KW 3-Phase AC Load Systems
6KW 1-Phase AC Load Systems
CP-6000-48 x 3 pcs
With 3-phase connection package
L N
L N
R – S – T : 18KW 3-Phase
R – N : 6KW 1-Phase
S – N : 6KW 1-Phase
T – N : 6KW 1-Phase
L N
N

18KW 3-Phase AC Load Systems
Renewable Energy as Priority
Grid power is used only when the batteries are over discharged or the sufficient solar energy is not available from the PV array.
If PV power is available it should be directed to the load and the excess power will be used for charging the batteries.

18KW 3-Phase AC Load Systems
Please setup the CombiPlus into Mode 3
First, the battery bank is charged from renewable energy when you use the enough PV array or other renewable energy, not from grid power.
Second, please setup the L.V.D. (Low Voltage Detection)
Third, when the battery bank reaches the L.V.D., the grid power will charge it by AC/DC charger which is included on the
CombiPlus.
Fourth, concurrently the grid power will supply electricity to
AC loads by ATS which is included on the CombiPlus.

UP to 90Kw System
If the CombiPlus inverter/charger has to connect with
PV modules and wind turbines, you have to procure
MPPT chargers because the battery can be charged from grid power, diesel generator, solar PV modules and wind energy.