2014 AIA Jacksonville Design Awards
(Craftsmanship Category)
Instructions Slide
Upon downloading file from your email please save file as submittal number .ppt. Utilize the
submittal number provided by AIA Jacksonville in the upper right corner where
indicated for each project submitted. Each project submitted must have a separate
PowerPoint file and be designated with the assigned submittal number. Each project
submittal file size must not exceed 10 MB
Slide 1 is for instruction purposes only and should not be included in the submittal.
Slide 2 is the program requirements and project title/data slide. The project title/data slide
must be the first slide of each presentation and shall contain the information requested.
Remove
this slide
before
submitting.
To upload your entry use the
following directions for the
FTP Site:
When you have completed
your entry, click on the link
below to send it to AIA
Jacksonville.
Provide a minimum of ten (10) and a maximum of twenty (20) PowerPoint color slides,
including the title slide and the project data slide.
https://www.hightail.com/u/20
14-design-awardsAIAJacksonville
More than one image may be placed on each slide if desired. Do Not use slide transitions or
animations in your submittal.
Enter your submittal number
in the subject line, and then
browse for your file. Once
you have attached the entry,
click on “SEND IT.”
If the name of the project is on the building and you can tell what the logo is, blur it out.
The right side of image slides can be used for a brief description of the image. Be concise
and use Arial Font only and minimum 10 pt type. DO NOT change the layout of the
slides.
You should receive a
confirmation that your file has
been sent.
The final slide in your presentation should be the Project Identification Slide. This slide WILL
NOT be seen by the jury. It is for AIA Jacksonville office purposes only and will be
removed from your presentation before reaching the jury.
If you have questions, call
the AIA Jacksonville office at
904.389.8421 or email Miguel
Martinez at
Migmart2335@yahoo.com
C01.01
This is the template for all image
slides.
The large number above
represents the entry and slide
number (entry#.slide#)
The box that contains these
instructions is to be used for a
description if desired.
Please replace the text as
necessary, do not alter location or
formatting.
Insert your image(s) within this 7” x 7” space.
All floor plans and site plan should be oriented in the same direction in the presentation and the
north arrow and a graphic scale be on all plans, and a graphic scale on building
elevations and building sections.
Please use this space to
describe, in a maximum of 300
words, the reason(s) that this
submission meets the described
standards and is worthy of
recognition.
Place project drawings and
photographs in the 7 inch square
to the left of this text.
(click on the square and delete it)
You can size your images in other
software or within PowerPoint.
To insert images:
(insert > picture > from file)
To resize: select picture, then:
(format > picture)
If you don’t see the dotted guide
lines go to view menu and
choose “show guides.”
You can include more than one
picture on a slide.
Please copy and paste this slide
to accommodate additional
images. You must have a
maximum of 10 image slides.