Clicker Notes • Check clickers out from the Bass circulation desk. • Ask for an LCD clicker - ones that have the display • • • window. If your clicker batteries need to be replaced, bring your clicker to the Bass circulation desk where a staff member will exchange the dead batteries in order for you to retain the same clicker for the remainder of the semester. You can use your clicker for more than one course, thus you only need to check out one clicker. If you have any questions, email itg@yale.edu 1 LCD Clickers Clicker Channel Battery Indicator Response Answer 2 LCD Clickers Make sure clicker channel number is set to 41. If not, change it by doing the following: Ch 4/A 1/D Ch Press “Ch” button Press “4” button Press “1” button Press “Ch” button to save ? 3 Analog Clickers The clicker channel number can be changed by doing the following: GO 4/A 1/D GO Note that the LED will flash red and amber when changing the channel and green when the channel has been saved. Press “GO” button Press “4” button Press “1” button Press “GO” button to save ? Feedback button 4 Clicker ID Register your clicker ID found on the back of the clicker. 5 Classes*v2 Registration Tool 6 Questions? Direct any questions to: itg@yale.edu Or classes@yale.edu 7