This document explains how to setup SIP trunk.
NCP is used as SIP provider in this document.
Edition AA September 12, 2011
Panasonic System Networks CO., LTD.
Communication Systems Business Unit
Field Engineer Team
1

1. Actual Use
SIP
Provider
IP Network
060-5432-1xxx
SIP Trunk
Registered to
SIP Provider
V-SIP Trunk
V-SIP Ext
LAN
060-5432-2222
SIP Phone
Registered to
SIP Provider
Ext 101
060-5432-1101
Ext 102
060-5432-1102
Ext 201
060-5432-1201
SIP Phone
Registered to
PBX (SIP-Ext)
2. Demo using NCP as SIP Provider
NCP V-SIP Ext
10.64.213.236
3002
SIP Trunk
Registered to
NCP
V-SIP Trunk
3001
SIP Phone
Registered to
NCP
LAN
TDE
10.64.213.233
Ext 101
060-5432-1101
Ext 102
060-5432-1102
2

NCP V-SIP Ext
10.64.213.236
3002
SIP Trunk
Registered to
NCP
V-SIP Trunk
3001
SIP Phone
Registered to
NCP
LAN
TDE
10.64.213.233
It is necessary to install VoIP DSP card.
3

1) Activation key for SIP Extension is required.
VoIP DSP card does not provide SIP phone activation key by default.
4

2) Select Virtual Slot.
5

3) Install Virtual SIP Extension (32-ch) card.
6

4) Select Port Property.
7

5) Assign Extension Number and Password after OUS (Out of Service).
Return to In Service after programming.
8

NCP V-SIP Ext
10.64.213.236
3002
SIP Trunk
Registered to
NCP
V-SIP Trunk LAN
TDE
10.64.213.233
3001
SIP Phone
Registered to
NCP
It is necessary to install VoIP DSP card.
9

1) Assign number of SIP-GW channel for Activation Key.
8ch for IP-GW
8ch for SIP-GW
If all CHs are used for “IP-GW”, SIP-GW does not work.
10

2) Assign V- SIPGW16 card.
3) Open “Port Property” of V-SIPGW16.
11

4) Assign Channel Attribution and IP address of NCP as carrier after OUS.
Sever name is used usually for actual carrier.
- Port 5 and 6 are connected with SIP extension of NCP for this example.
- Port 1 to 4 do not have relation with this demo.
These are example for SIP trunk to SIP trunk connection.
12

5) Assign “User Name”, “ID” and “Password”.
- User Name & ID = Extension Number of NCP
- Password = SIP extension password of NCP
- Port 1 to 4 do not have relation with this demo.
These are example for SIP trunk to SIP trunk connection.
13

6) Return to In Service.
- Port 1 to 4 do not have relation with this demo.
These are example for SIP trunk to SIP trunk connection.
14

7) Set Trunk Group 2, if Trunk Group 1 is used for other demo.
- Port 1 to 4 do not have relation with this demo.
These are example for SIP trunk to SIP trunk connection.
15

8) Assign dialing plan in order to make CO call without dialing “#”.
When Ex201 in TDE calls
Ext 1001 in NCP, dial 0/91001 or dial 802(TRG2)-1001.
201 Digital PT
NCP V-SIP Ext
10.64.213.236
V-SIP Trunk
3002
SIP Trunk
3001 SIP
LAN
TDE
10.64.213.233
1001 Digital PT
16

9) Assign DDI.
When Ex1001 in NCP calls
Ext 201 in TDE, dial 3002 .
DDI 3002 is routed to Ext 201 .
201 Digital PT
NCP V-SIP Ext
10.64.213.236
V-SIP Trunk
3002
SIP Trunk
3001 SIP
LAN
TDE
10.64.213.233
1001 Digital PT
17

18