PowerLogic EGX300 Training
Integrated gateway-server for entry-level
system monitoring
EGX300 Overview
View device data through a
simple browser – no software
needed
EGX300 web page
Trend plots
Data log files
EGX100
EGX300
Pull information into web
pages from other PowerLogic
gateways (PM8ECC, EGX100)
ION 6200
Schneider Electric - Division - Name – Date
PM800
Micrologic
Sepam
2
Outline Training
● Minimum System Requirements
● Physical Characteristic
● Ethernet
● Serial
● Exterior
● TRe
● Setup
●AutoDiscovery
●Data Export
● Monitor
●Single Device Page
●Summary Pages
●Logging
●Custom Pages
● Documentation
● Control
●Resets
● Diagnostic
● Maintenance
Schneider Electric - Division - Name – Date
● Advance Feature
● Remote Device connection
● Custom Logo
● Supported Devices
● Application Architecture
● Obsolescence Plan
● Legacy Solutions
● Language File Customization
● Accessory Kits
● FAQ
● Appendix
● Changes in red denotes Phase 2 functions
3
Minimum System Requirements
Although there is NO need to install any software, the computer
accessing EGX300 will need to have a browser installed.
We support:
● Microsoft Internet Explorer 6.0 or higher
Schneider Electric - Division - Name – Date
4
Physical Characteristic: Ethernet
● Ethernet
● 10/100BaseTx
● Media Type:
●10T/100Tx Auto
●10BaseT-HD
●10BaseT-FD
●100BaseTx-HD
●100BaseTx-FD
● Framing:
Ethernet II & 802.3 (SNAP)
● IP Parameters:
Address, Subnet Mask, & Default Gateway
● Protocols:
HTTP, ModbusTCP/IP, FTP, SNMP (MIB II), SNTP, SMTP
● Connector:
RJ45
● Pinout:
Industry standard
● Supports 48 concurrent ModbusTCP/IP connections
● Duplicate IP address detection (FDR basic)
Schneider Electric - Division - Name – Date
5
Physical Characteristic: Serial
● Serial Line
●
●
●
●
●
●
●
All lines optically isolated
Physical interface:
RS485 4-wire, RS485 2-wire, RS232
Protocols:
ModbusRTU, POWERLOGIC (SY/MAX), ModbusASCII, Jbus
Baud:
2400–38400bps (RS485); 2400-57600bps (RS232 ASCII)
Parity:
None, Even, & Odd
Response timeout:
0.1 to 10 seconds (default = 3 seconds)
Connector:
●RS485
5 position plugable screw-terminal
●RS232
RJ45
● Pinout:
●RS232
Industry standard EIA561 for RJ45
● Note: EGX300 is internally connected: no need to physically connect the EGX300
for two wire mode.
Schneider Electric - Division - Name – Date
6
Physical Characteristic: Exterior
Control power
(screw terminal connector)
RJ45 Ethernet port
(IEEE802.3af)
LED indicator for
power & status
Recessed reset button
LED indicators for Ethernet and
serial communications
Schneider Electric - Division - Name – Date
7
Physical Characteristic: Exterior
RS485 serial port
(screw terminal connector)
Bias, Termination, and
2-wire / 4-wire jumper
switches
Schneider Electric - Division - Name – Date
RS232 serial port
(RJ45 connector)
8
Transparent Ready {TRe}
● Embedded web server provides real-time tabular data views for all supported device types
●Single Device Basic Readings
- Includes Analog Meters view with
-Three-phase Current
- Real, Reactive, and Apparent Power
- Line-line phase Voltage
- Line-neutral phase Voltage
●Summary Device Views
– Circuit Summary
– Load Current Summary
– Demand Current Summary
– Power Summary
– Energy Summary
●Real-time Trending Graph view (multi-device, multi-topic)
– Includes a running table of min/max/avg values
– Includes a tabular view of trended data
● Advanced users can create custom web views
Schneider Electric - Division - Name – Date
9
TRe: Setup
● Ethernet & TCP/IP
● Serial Port
● Remote Device Connections
● Device List
● Device Logging
● Device Log Export
● Date and Time
● SNMP Parameters
● Modbus TCP/IP Filtering
● Documentation Links
● User Accounts
● Web Page Access
● Preferences
Schneider Electric - Division - Name – Date
10
TRe: Setup => Auto Discovery
● EGX300 features the ability to “Auto
Discover” devices in its daisy chain
● The EGX300 will not find remote
devices; the user will need to define a
locate address and remote address
● Look under the device list and scroll
to the bottom of the page
● The user needs to setup the right
baud rate and settings for this ability
to work.
Press to Discover
Schneider Electric - Division - Name – Date
11
Note: Device List
● Devices can either be manually
entered or auto discovered.
● You can manually enter a device and
not have it present; however, you will
not have a page created for the
device until the device is connected.
● There should not be a problem for
communication because the EGX300
will not detect the device.
Schneider Electric - Division - Name – Date
12
TRe: Setup => Data Export
● Users have four options
● Disable
● Export via FTP
● Export via HTTP
● Export via E-mail
● Users will have to setup logging first
before choosing either options
● Uses can now only send
“incremental” data versus ALL data
with the EGX400
● Data can be push incrementally
● For Equipment Plants, the option is
usually disable by default.
Schneider Electric - Division - Name – Date
13
TRe: Monitor => Single Device Page
● The EGX300 has the ability to display
real time readings from devices.
● The devices can be selected
individually
● All data displayed has been scaled
and set at factory
● Any unique requests will have to be
done as a custom page
● Analog Meter Display is Available
Schneider Electric - Division - Name – Date
14
TRe: Monitor => Summary Pages
Summary Pages are standard with TRe
level 2 support.
Users can select ALL or individual
pages to be displayed the summary
pages.
Pages to be displayed:
● Circuit Summary
● Load Current
● Demand Current
● Power
● Energy
Schneider Electric - Division - Name – Date
15
TRe: Monitoring => Logging
● Embedded web server provides user
selectable topics per device
● Provides logging function to store data
from serial devices on 5, 10,15, 20,
30, or 60 minute intervals
● Embedded web server provides a
graphical view of stored data logs
● Provides Simple Mail Transfer
Protocol (SMTP) to E-mail stored
device data logs on user defined
intervals
● Provides File Transfer Protocol (FTP)
server to access device data logs
● Provides the ability to send data logs
manually with the click of a button
Schneider Electric - Division - Name – Date
16
Logging File: example.csv
Schneider Electric - Division - Name – Date
17
TRe: Monitoring => Real Time Trending
● Real Time Trending with devices through
web interface
● Can choose multiple topics
Schneider Electric - Division - Name – Date
18
Monitor: Trend Plots through log files
Schneider Electric - Division - Name – Date
19
TRe: Monitoring => Custom Pages
● EGX300 will allow users to transfer
their own custom pages
● Custom pages will allow users to
have the flexibility to create their own
custom solution
Schneider Electric - Division - Name – Date
20
TRe: Documentation
● As part of TRe, users can transfer
documentation or create
documentation links
● Users can store up to 512 Mb
● The documentation can link to other
devices that have web server
capabilities
Schneider Electric - Division - Name – Date
21
Control
● On the Control page, users can reset
the values of their individual devices.
Schneider Electric - Division - Name – Date
22
Diagnostic
● Users can:
● Look at stats for the EGX300
● Read devices on this page
● Check Communication Connection
● The stats information will be used by
design and tech support to analyze the
system situation
Schneider Electric - Division - Name – Date
23
Diagnostic: Accumulative Connections
● Users can click accumulative
connections and displayed previous
connections
● This is valuable in terms of security to
keep track of users who have logged
on before.
Schneider Electric - Division - Name – Date
24
Maintenance Log
● EGX300 provides the ability to record
maintenance log files.
● Typical users can record simple text
information about system or
challenges.
Schneider Electric - Division - Name – Date
25
Advance Features: Remote Connection
● Under Remote Device Connection,
users can setup logging remotely and
access devices remotely
Schneider Electric - Division - Name – Date
26
Custom Logo
Logo
● Users can customize splash screen,
logo, color, and favicon
● Please refer to the white paper for
detail specifications
● This will allow Integrators to add more
value for their services
Favicon
Splash
Screen
Schneider Electric - Division - Name – Date
27
Viewable Device Type
● Ability to hide un needed device
type from the device list
Schneider Electric - Division - Name – Date
28
Device Types for Support => Refer to next slides for level of
support
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
BCM
BCPM A/B/C
CM100/200
CM2000 Series Meters
CM3000 Series Meters
CM4000 Series Meters
DM6200
E5600
Enercept
Energy Meter
ION6200
ION7300
ION7650
MCM
Micrologic A
Micrologic H
Micrologic P
MicrologicA+CCM
MicrologicH+CCM
MicrologicP+CCM
Model98
Schneider Electric - Division - Name – Date
●
●
●
●
●
●
●
●
●
●
●
●
Motorlogic Plus
Motorlogic Plus II
MVSS/RVSS
PM210
PM600 Series Meters
PM700 Series Meters
PM800 Series Meters
PM1200
Sepam 2000
Sepam Series 10
Sepam Series 20
Sepam Series 40
● Sepam Series 80
29
Level of Support through EGX300
TRe Compatibility
View Data
ION E Compatibility
Transfer Datalog
Waveform Captures
Device Based Alarms
SMS Compatibility
Transfer Datalog
Waveform Captures
Device Based Alarms
CM100/200
x
x
x
CM2000 Series
x
x
x
CM3000 Series
x
x
x
CM4000 Series
x
x
x
Enercept Meters
x
x
x
Energy Meters
x
x
x
PM210
x
x
x
PM600 Series
x
x
x
PM700 Series
x
x
x
PM800 Series
x
x
x
Schneider Electric - Division - Name – Date
30
Level of Support through EGX300
TRe Compatibility
View Data
ION E Compatibility
Transfer Datalog
Waveform Captures
Device Based Alarms
SMS Compatibility
Transfer Datalog
Waveform Captures
Device Based Alarms
ION 6200*
x
ION 7300*
x
ION 7650*
x
SEPAM 2000
x
x
x
SEPAM Series 20
x
x
x
SEPAM Series 40
x
x
x
SEPAM Series 80
x
x
x
x
*ION E can not be supported through the EGX300 with full capabilities due to no support of ION protocol
Schneider Electric - Division - Name – Date
31
Level of Support through EGX300
TRe Compatibility
View Data
ION E Compatibility
Transfer Datalog
Waveform Captures
Device Based Alarms
SMS Compatibility
Transfer Datalog
Waveform Captures
Device Based Alarms
Model 98
x
x
x
Micrologic Plus
x
x
x
Micrologic Plus II
x
x
x
MVSS/RVSS
x
x
x
Micrologic A
x
x
x
Micrologic H
x
x
x
Micrologic P
x
x
x
Micrologic A+CCM
x
x
x
Micrologic H+CCM
x
x
x
Micrologic P+CCM
x
x
x
Schneider Electric - Division - Name – Date
32
Application Architecture
● How to address the following situations:
● Two and Four Wire Systems
● Remote Access to Other Gateways
Schneider Electric - Division - Name – Date
33
Two and Four Wire Systems
Ethernet Network
RS-485 (4 Wire)
RS-485 (2 Wire)
N < 32
Up to 64 Devices can be view by one EGX300
EGX300 can remotely connect to other gateways
Schneider Electric - Division - Name – Date
34
Remote Access to Other Gateways
Ethernet
EGX300
EGX100
EGX300 can poll EGX100 through Ethernet
Schneider Electric - Division - Name – Date
35
Obsolescence Plan
● EGX300 will be introduced by Q1
2009
● We will stop selling EGX400 by Q1
2010
● We will have stock to replace existing
EGX400 for warranty/repair purposes
for about three years
Schneider Electric - Division - Name – Date
● Special Substitution Use Cases (refer
to following slides after):
● Second Serial Port
● Older Systems
36
Second Serial Port
Ethernet
EGX100
EGX300
N <= 32
N <= 32
Up to 64 Devices can be viewed by one EGX300
EGX300 can remotely connect to other gateways
Schneider Electric - Division - Name – Date
37
Legacy Systems
Ethernet
EGX300
CNV100
2 wire System
4 wire System
Schneider Electric - Division - Name – Date
38
Accessory Kit
● Allows configuration via RS232 serial or Ethernet port
● Kit Contents
● RJ45 to DB9F adapter
● CAT5 Crossover cable, 3-meters (10-feet), orange
● Instruction sheet
● Ordering Information
●
TCSEAK0100
● Market Price (average)
● $50 (USD)
Schneider Electric - Division - Name – Date
39
Configuration Kit
Schneider Electric - Division - Name – Date
IF USB ONLY, need converter to serial
40
Accessories - PoE Injector (IEEE
802.3af)
● Active mid-span device with universal power cord
● Contents
● Universal power cord (IEC-60320-C13 & IEC60320-C14, 3-meters (10-feet)
● Plug adapters for Australia, Europe, UK, USA
● Instruction sheet
● Ordering Information
●
TCSEAV0100
● Market Price (average)
● $80 (USD)
Schneider Electric - Division - Name – Date
41
PoE Injector Kit
Schneider Electric - Division - Name – Date
42
FAQ
● Are we limited to the predefine topics already in the logging
section setup?
● No, we can add more topics; however, we are limited to logging 12
topics
● How many languages can the EGX300 support?
● We can support up to 8 languages with 4 default (English, French,
Spanish, German)
● What type of file formats are supported?
● Most files formats are supported, e.g. jpeg, swf, doc, xls
● Can divide the network into 2 segments to get faster response?
● Buy one EGX300 and one EGX100
● Do we support other web browsers?
● Our pages can be viewed in other browsers
Schneider Electric - Division - Name – Date
43
FAQ Continuation
● Do we support ION protocol?
● At this time, we do not support ION protocol.
● How much memory does EGX300 support?
● 512 Mb
● How many e-mails will be sent from the EGX300 for logging?
● The number of e-mails sent will be determine by number of devices logged.
● Does EGX300 support SNMP?
● Yes, it supports the standard MIB (II).
Schneider Electric - Division - Name – Date
44
For more information …
● Please visit www.PowerLogic.com
Schneider Electric - Division - Name – Date
45
Appendix
● User interface following in the next slides
Schneider Electric - Division - Name – Date
46
EGX300 user interface – real time data
Schneider Electric - Division - Name – Date
47
EGX300 user interface – maintenance
Schneider Electric - Division - Name – Date
48
EGX300 user interface – summary device
Schneider Electric - Division - Name – Date
49
EGX300 user interface – summary device
Schneider Electric - Division - Name – Date
50
EGX300 user interface – summary device
Schneider Electric - Division - Name – Date
51
EGX300 user interface – summary device
Schneider Electric - Division - Name – Date
52
EGX300 user interface – summary device
Schneider Electric - Division - Name – Date
53
EGX300 user interface – diagnostics
Schneider Electric - Division - Name – Date
54
EGX300 user interface – setup
Schneider Electric - Division - Name – Date
55
EGX300 user interface – setup
Schneider Electric - Division - Name – Date
56
EGX300 user interface – setup
Schneider Electric - Division - Name – Date
57
EGX300 user interface – setup
Automatically detect
networked devices
• Simplifies initial setup
• Promotes easy system
expansion
Schneider Electric - Division - Name – Date
58
EGX300 user interface – setup
Schneider Electric - Division - Name – Date
59
EGX300 user interface – setup
Device Logging
Choose the logging intervals
Choose from a customizable
list of logging topics and log up
to 10
Schneider Electric - Division - Name – Date
60
EGX300 user interface – setup
Schneider Electric - Division - Name – Date
61
EGX300 user interface
Choose to receive the most
up-to-date data or all data sent
via email or ftp
Schneider Electric - Division - Name – Date
62
EGX300 user interface – setup
Password protection and
controlled network access
ensures data and system
security
Replace with Fake user ID
Schneider Electric - Division - Name – Date
63
EGX300 user interface – setup
Schneider Electric - Division - Name – Date
64
EGX300 user interface – setup
Schneider Electric - Division - Name – Date
65
EGX300 user interface – setup
Schneider Electric - Division - Name – Date
66
EGX300 user interface – setup
Schneider Electric - Division - Name – Date
67
EGX300 user interface – basic readings
Schneider Electric - Division - Name – Date
68
EGX300 user interface – accumulated value
Schneider Electric - Division - Name – Date
69
EGX300 user interface --
Schneider Electric - Division - Name – Date
70