Providing a “breath of fresh air” since 1984.
Manufacturer of sourcecapture systems for:
• Vehicle Exhaust Fumes
• Welding Fumes
• Fume / Dust Collection
• Emergency Vehicle Stations
Vehicle Exhaust Systems
• Overhead – Hose reels, nondisappearing, telescoping, disappearing,
two-bay systems, wall-box, and door
port
• Underfloor – Disappearing and nondisappearing, single or dual fixture
Automatic Hose Reels
• Lowest-Priced hose reels
• No electric power source needed
• Spring powered (window shade)
• Variety of possible configurations
The picture above shows Ventaire
Automatic Hose Reels with hightemperature flexible tubing installed in a
military base. Car dealerships, bus
garages, and maintenance facilities are
other popular applications for HRA’s.
Motorized Hose Reels
• Fully automated
• Direct-drive gear motor (110/1/60)
• Optional pendant station or remote
control
• Explosion-Proof construction available
The Ventaire motorized hose reel pictured to the left
is mounted on a five-foot rotational boom for greater
reach and versatility. Booms from five to twenty feet
are available for use with hose reels. Hose reels can
be wall mount, ceiling mounted, or boom mount
without special brackets. These particular pictures
were taken at a Boyer Ford Truck Sales.
Non-Disappearing
• Economical, yet effective
• Available in many different
configurations
• Low installation cost
The Ventaire overhead non-disappearing
system is pictured above in a truck repair
facility. This system is equipped automatic
cable reel and lifting saddle. Many other
options are also available.
Non-Disappearing
Telescoping
• Self – Storing with stirrup support.
• Automatic spring door in tail pipe adaptor.
• Easiest installation
• Very cost effective
Overhead Disappearing
• Boom mountable
• Hose completely concealed
when not in use
• Popular for military
applications
• Our original disappearing
system
Our original disappearing system, it is often specified for military projects.
Options include a throat seal, self-closing door, winch, and swivel boom.
Two Bay Systems
• Ideal for smaller repair shops
• Includes integral blower
• Features two sections of “NoCrush” tubing
• Requires minimal duct
Ventaire two-bay systems are ideal
for service stations where a door
port system would be inadequate
and an overhead system too
expensive. System includes hose,
blower, tailpipe adapters, and all
necessary connections.
Door Port / Wall Box
• Ventaire wall box (right) features special
quick disconnect and blast gate shutoff
• Available in Galvanized or Stainless Steel
construction
• Single or dual wall box systems available
• Ventaire door ports (left) are our
most economical system
• No fan necessary, uses force of
vehicle’s exhaust to remove harmful
fumes
Underfloor Systems
• Disappearing or Non-disappearing
• Galvanized Steel, Stainless Steel, or
Aluminum construction
• For use with transite type, PVC or
fiberglass pipe installed under concrete
shop floor.
Ventaire underfloor systems consist of a door and
frame attached to a metal boot, saddle mount, and
flexible tubing set. The flexible tubing set consists
of “No-Crush” tubing with tailpipe adapter, hose
guide, and ram-rod. Many optional components
and materials are available.
Underfloor Systems
• Hides out of sight when not in use
•Keeps work area clean of obstruction
Welding Systems
• Welding Hood Systems
• Fume Arm Systems
• Portable Fume Collection Systems
Welding Hood Systems
• Conical weld hoods available in a variety of
materials
• Slotted fume hood meets OSHA, ASHRAE, and
Industrial Ventilation standards
• Slotted fume hood can be custom built to most
any size needed
FEH for smaller parts within 2
feet of hood.
Ventaire conical weld hood drops, such as the
one pictured to the left, consist of flexible tubing
and a hood, which includes an inlet screen,
handle, and placement magnet. Optional rope
and pulley kit increases convenience.
Externally Supported Arms
• Three models – WAFE, FAFE, and EAFE
• FAFE and EAFE swivel full 360 degrees
• Variety of different lengths and diameters
available
Ventaire Externally Supported Fume Arms feature
lightweight aluminum arm members, friction disks at
joints, and springs to offset weight. The picture on the
left shows an EAFE, which consists of a FAFE arm
mounted to a rotating boom to extend its reach.
Internally Supported Arms
• Two models – IAFE and IEAFE
• Fully concealed internal linkage
• Swivels full 360 degrees
• Ceiling or wall mountable
Ventaire IAFE’s are available in diameters of
6 or 8 inches, and can be made from 5 to 15
feet in length. Ventaire IEAFE’s consist of a
IAFE arm mounted to a section of rigid pipe
which extends the arm’s reach.
Self-Supporting Arms
• Cast aluminum knee joints that
are fully adjustable to worker’s
desired tension
• Smooth-bore pipe and external
supports eliminate obstructions in
airflow
• Ceiling or wall mountable
• Available in a wide range of
sizes
• Optional light source package
Ventaire Self-Supporting fume arms feature the latest in fume removal
technology. Eliminating obstructions in the airflow that are present in
traditional arms leads to superior suction power.
Portable Fume Collectors
• Integral filtration system and blower
• Easily movable
• Ideal for smaller welding shops
• Energy efficient
• Cleans and recycles polluted air
• Self cleaning feature (port 100 only)
5 year filter life.
Ventaire portable welding units are ideal for the smaller
welding shop because they eliminate the need for a
costly fixed ventilation system or an inefficient make-up
air system. Various configurations available to suit any
application.
PORT 100
Fume / Dust Collection
• Cyclone Dust Collector
• Horizontal Fume Collector
Cyclone Dust Collector
• Continuously welded seams, totally enclosed
fan motor, and weatherproof finish allow outside
storage
• Many different sizes available
• Many dust storage options available
• Various optional filtering configurations
Centrifugal action separates large particles from
contaminated air where they can be deposited
into a user supplied 55 gallon drum, allowing fine
dust to be filtered out by the standard cotton
after-filters.
Horizontal Fume Collector
• Available with (BHOR) or without
(NHOR) integral blower
• Cleans polluted air and recycles
back into work area
• Available in various configurations
to suit any application
The “BHOR” system includes an integral blower, making it suitable for
installation with duct systems where a separate blower is not available or
desired. The “NHOR” system is designed for a ducting system that
already includes a separate blower.
Emergency Vehicles
• Two different nozzle styles: magnetic or
pneumatic
• 5 year warranty on fans; 2 year on
complete system
• Includes Firehouse control panel w/ CO
sensor
Ventaire offers a full line
of automatic-release
systems for emergency
vehicle use. All systems
include a fan and control
panel with a digital CO
sensor.
Ventaire also offers a full line of blowers, blast gates, tailpipe adapters,
flexible tubing, and many other ventilation products. Check out our website,
www.ventaire.com for more information.
Feel free to contact us via
phone, fax, or email at
any time if you have any
questions about our
products or services.