Product Sales Guide
FX 80 – 105 -135
High spin, freestanding washer extractors
Eco3 wash technology
25% less energy consumption
15% less water consumption
25% less residual moisture
Saving calculation - Eco3
Water
Energy
FS7
FX80
FS7
FX80
Liters / wash cycle
68,73
58,5
1,88
1,44
kWh / wash cycle
Eur / wash cycle
0,193
0,164
0,334
0,256
Eur / wash cycle
Wash cycles
20.000
20.000
20.000
20.000
Wash cycles
- 1.560
Saving Eur
Saving Eur
- 580
Total saving 2.140 Eur
• Invest / spend Your saved money:
/
/
Washing results
Comparison of washing results - program No.11 (30°C gentle)
- A gentle laundry program for wool, silk and garments that should be washed by
hand
FS7
FX80
Difference
Wash water (l)
30,17
24,6
- 18,46%
Total water (l)
68,73
58,5
- 14,88%
Energy (kWh)
1,88
1,436
- 23,62%
0:38:20
0:43:02
+ 12,26%
Spin speed (rpm)
980
1165
+ 18,88%
Rest humidity (%)
63,8
47,2
- 26,02%
Temperature (°C)
55,83
55,3
+ 2,73%
Time (min)
* Tested i TZÚ Brno
FX range design
FX80
FX105
FX135
Cabinet
Standard:
• Top panel: stainless steel
• Front panel: painted
• Ornamental plate: galvanized coating
Option:
• Front panel: stainless steel AISI 304
Side panels
• Painted side panels
• Reinforcement in side panels for extra strenght:
- U-profile: FX80/105
1x
FX135
2x
Colour options
XControl
• 7 buttons + 2 hidden
Hidden navigation buttons (for menus)
Extra functions selection
Guiding
information
Graphical display
- Anti-reflexive foil (sunshine)
- Anti-vandal protection
Navigation
Select
Cancel
Start
XControl
• Well-arranged screens for simple control
1. Program selection
2. Soap information
3. Price information
4. Run information
XControl
• Main features – Wash programs
• 15 free adaptable programs
• Factory pre-programmed programs:
- 5x Standard
- 4x Eco
- 4x Super Eco
- 2x Extraction
• Possibility to update wash programs:
- Manually on machine
- Through USB memory stick
- With PC and TraceTech SW
XControl
• Main features – Wash process
• Consumption (water, energy) reduction by:
- Precise water level measurement (step 0,1 unit)
- Exact temperature measurement (step 0,1 °C)
• New spin sequence to reduce residual humidity
XControl
• Main features – TraceTech connection
• Washer management tool – TraceTech SW:
- Machine set-up
- Wash programs update
- Monitoring + alarms (e-mails, SMS)
- Traceability
- Reports, statistics
• Connection:
- Wired RS485
- Wireless WiFi
XControl
• Main features – Other
• Extra functions: Prewash, Soak, No spin, Gentle wash, Delay start
• Texts can be shown in 19 languages
• 8 liquid soap signals
• Ready for connecting water recycling kit
• Buzzer signal to inform about significant events (end of cycle, error,..)
• Simple firmware update through USB memory stick
XControl+
• 21 buttons
Stop
Navigation
Numeric
keypad
Detail program
information
Graphical display
- Anti-reflexive foil (sunshine)
- Anti-vandal protection
Navigation
Select
Cancel
Start
XControl+
• Additional features
• Up to 99 programs
• Factory pre-programmed settings:
- 5x Standard
- 4x Eco
- 4x Super Eco
- 2x Extraction
- 5x Special (Sport, Mops, Jeans,..)
• Extra wash / drain steps:
- Spray
- Static drain
- Cool down
- Reverse drain
- Soak
Inner drum
• 3 lifting ribs for ideal mechanical action
• Stainless steel AISI 304
• Perforated ribs („PowerWash™“)
• New perforation („Cascade™“)
• All drums are „statically balanced“
FX80
FX105
FX135
77,2
105,6
135,8
8
11
14
Diameter (mm)
530
620
620
Depth (mm)
350
350
450
Volume (l)
Capacity (kg)
Rib in inner drum
Inner drum - Cascade™
• Extraction over 400G » not sticky linen to the drum
• More perforations » optimized water evacuation
• Less residual water » lower rest humidity
• Cascade shape of holes » better washing results
Water inlets
• Standard 3 high volume inlet valves
• Optional 2
• Standard cool down
• ¾“ inlet valves
• Easy to remove filter without having
to remove the valve: service friendly
Water inlets
Heating - Electrical
kW
FX80
FX105
FX135
6 / 9 (4,6)
6 / 9 / 12
9 / 12
Heating elements
in the front
• Positioned in front of machine
• Easy access for quick service
• Short wash cycles
Heating element
Heating - Steam
Steam injector
Steam opening
• Direct steam
• 1-8 bars
• Positioned in the back
• Combination with electrical heating is possible
• Switch between steam and electrical heating is on the back panel
Soap box
• 4 compartments on middle of the top
- 2 for powder and 2 for liquid soap
• Scandinavian design
• Ergonomical position:
- Front and center
• Easy service:
- 4 compartments next to each other: No confusion
Soap box
Lid of soap box
Soap box – connection to the tub
• No agressive chemicals directly on the linen
• Chemicals enter the tub between the back
plate of the tub and the drum
Soap box - mixer
• Soap mixer is a standard feature on FX line
• Liquid soap pumps can be connected to the mixer
Mixer
• Chemicals are diluted before entering the tub
• No hot water directly on the linen
Liquid soap connection
Easy-Soap®
• Easy soap is an option on the FX line
• Electrical board with connection
to the liquid soap inlets is added
• Easy service:
- Machine remains unopened
For fixation plastic box with PCB board and
8 LED please unscrew cover on rear bridge
Easy-Soap®
• Up to 13 liquid soap pumps possible, connected to the soap box by hose:
- 2x Ø19mm
- 3x Ø14,5mm
- 8x Ø11,5mm
• Connected to liquid soap (inlets are parts of mixer)
• No hot water directly on the linen
• Holes of the liquid soaps inlets must be drilled through the detergent
suppliers according to their requirements
Door handle, door lock
• Ergonomic door knob for easy opening
Door knob
• Scandinavian design
• Strong overdimensioned door lock for safety
Door lock
Door handle, door lock
• Safety system to protect destroying of the handle during operation
- System (due to the possibility of slipping in both extreme positions)
prevents
accidental damage when using greater force
Door
FX80:
Primus
Girbau
Electrolux
FX105:
Door diameter (mm)
FX 80
FX 105
FX 135
330
410
410
• Easy loading & unloading
Primus
Electrolux
IPSO
• Xtreme big door openings
• Opening to 180°
FX135:
Primus
Electrolux
Girbau
Hinges
• Oversized hinges for long life span
• Integrated in the new design
Hinges
Close up hinges
Open door hinges
Open door hinges
Cross and bearing house
• Modular bearing house design
• Star shape cast steel out of 1 piece:
- Sandblasted and degreased
• Red painted
• 1+1 bearing per model (1+2 on model FX135)
Advantage: Long life span & easy service
Bearing house construction
• Bearing house is mounted at back of the tub inside the frame shell
• Vibrations are optimally diverted to the suspension
Frame shell
Bearing house
Outer tub
Bearings
• High quality bearings SKF:
- Ball bearings
Advantage: Easy to replace bearings
Shafts
• Special black steel for Xtreme strength
• Oversized diameters
• Welded on the drum for long life span
Shaft
Seal
• 3 radial seals FKM
• 1 hardened sleeve
• Long life span
Seals
• Easy service:
- Quick replacement time
Detail of seal
Drain
• Directly under the tub:
- Low water consumption
- No wasted chemicals
• Standard 3“ drain valves:
- Small objects are evacuated
• 90°drain valve:
- Auto-rinsing effect behind the valve
Drain under tub
• Easy service:
- Access from the front of machine
• 2nd drain valve optional for water recuperation
Suspension
• Soft springs for high G-force
• Optimized balance:
- No anchoring required
Close up spring
Spring
• Easy installation
Suspension
Pulley
• Main pulley: Aluminium
• Motor pulley: Black steel
• Easy service
V-belts
• 1 micro V-belt per machine
• FX80: V-belt with 6 ribs
V-belt on motor drive
• FX105-135: V-belt with 8 ribs
• Belts are mechanically tensioned by bolt
Close up V-belts
Tilt switch
• 1 out of balance switch positioned below the tub in the front
• Steel spring is activated during high unbalances
• Is positioned in the factory
• With extreme unbalances:
- The machine will repeat maximum
10 times (is not changeable)
• Activated when unbalances occur during:
- Low spin
- High spin
Tilt switch
Note: During installation & service always check if the tilt
switches are well positioned
Frames
• Zinc plated steel
• Connected by „CLINCH“ technology (not welded)
Frames - Clinch technology
• New technology
• Not welded
• Stronger assembly of parts
• First time use on FX platform
Clinch technology - Benefits
• Strength of the connections is same as by spot welding
• Connection does not rust
• Increasing productivity
• Shorter lead times
Coin operated
• Electronical or mechanical coin meter
• Large integrated coin box
Coin box
Coin box facia panel
• Central payment as an alternative
Safety
• FX machines correspond to all CE and EMC directives, WRAS approval
• Noise level below 65 dB
• Standard: Emergency button (none on coin and CPS machines)
• One mainswitch
• Buzzer signal at end of cycle
Emergency button
Main switch
Approvals and Technology
• CE
• CSA / UL
• WRAS