Rev. 2012-10-22
Location details for November 7, 2012:
University of Agder,
Campus Grimstad
Jon Lilletuns vei 9
4879 Grimstad, Norway
http://www.uia.no/en/portals/about_t
he_university/engineering_and_scie
nce/about_the_faculty/campus_grim
stad2
NODE Mechatronics Conference
November 7. 2012
Free Parking is available at the old campus. Please allow
for an approximately 10 minute walk from the parking
lot to the new campus building.
NODE’s vision is to assist in assuring that the oil and gas
industry in South Norway will maintain its globally leading
position regardless of outside competition.
Conference Program
Uppdated Program Information and
Registration on NODE web:
NODE • Adresse: Gimlemoen 19, 4630 Kristiansand, Norway • Mail: post@ncenode.no • www.ncenode.no
www.ncenode.no
Rev. 2012-11-01
NODE Mechatronics Conference 2012
November 7, 2012
Venue: University of Agder, Grimstad Campus
1300 University’s Examples of Mechatronic Projects
- High Power Motor for Wind and Wave Energy Transmission, Professor
Torben Ole Andersen, Institute of Energy Technology, Aalborg University
- Using Stewart Platforms to Investigate and Develop Heave Compensation
Equipment, Prof. Geir Hovland, University of Agder
- Collision Handling in Harsh Outdoor Industrial Environments Using
Industrial Robots, v. Knut Berg Kaldestad, University of Agder
0930 Registration
1400 myDrilling – The Power of Knowledge, Tore Bjerke, Program
Manager, Aker Solutions
1000 Opening, Thor Arne Håverstad, Chairman NODE Steering Committee
& Executive Vice President, Head of Drilling Technologies, Aker Solutions
1420 AutoConRig, Jens Ingvald Ornæs, Business Development Manager
Controls, National Oilwell Varco
1015 The Future of Offshore Mechatronics Technology - in a Global
Business View
- Tor Erling Gunnerød, CFO, Aker Solutions
- Mads Andersen, VP & Country Manager, Cameron
- Bjørn Reang, Vice President Finance and Administration, NOV APL
1100 NODE Mechatronics’ Award 2012, Nominees and Winner
- Autonomous Drilling Systems, Kjell Rohde, Contr. Product Strategist, NOV
- MDDM 1000AC, Arnt Aske, Head of Product Quality, Aker Solutions
- SmartRacker, Espen Botnan, Product Line Manager, Cameron
The Award and winner will be presented by Torkel Bjørnson, Head Project
Manager, NCE Systems Engineering Kongsberg
1200 LUNCH
1440 Autonomy in Advanced Cruise Missiles – Sense, Interpret and
React, Jens A Gjestvang Kongsberg Defence Systems
1500 Break
1515 Fiber Rope Systems, Frode Grovan, Sales Director, Cargotec,
1535 Robotized Drilling Solutions, Bjørn Brekne, Lead Researcher Drilling
Technology, Statoil
1655 Continuous Motion Rig, Odd B. Skjaerseth, West Group
1615 Summary
1630 End