Vibration Monitoring and Machine Protection Systems
1010 E. Main St., League City, TX 77573 Phone: 281-334-0766 Fax: 281-334-4255
www.stiweb.com / www.stiwebstore.com
SALES TRAINING
for Representatives
and Distributors
Vibration and Temperature Sensors, Transmitters, Monitors, Cables, Mounting Accessories, BNC
Switch Boxes, Enclosures, Junction Boxes, Tachometers, Custom Panels and More….
CMCP
“Condition Monitoring Custom Products”
CMCP-XXX
Standard Products
CP
Custom Products
Transmitter Systems
Free Standing Cabinets
Monitor Systems
Custom Integration & Test
Industrial Radio Modems
Custom Enclosures
Low Cost Accelerometers
Field IO (Analog to Digital)
Temperature Sensors
Extension Cables
Mounting Accessories
BNC Switch Boxes
Junction Boxes
Balance Kits (CMXA)
Instrument Wire
Rotor Kits
Tachometers
Eddy Probe Calibrators
HMI Solutions
AutoCAD Drawings
Industrial Computers
STI Vibration Monitoring Inc.
About STI
STI was founded in 1989 and created Condition Monitoring Custom
Products (CMCP) in 1995 to bring more low cost solutions to our customers
while providing the flexibility required in today’s competitive market.
STI specializes in low cost alternatives to “Rack Based Monitoring”, by
bringing single channel transmitters and monitors into the market. By
creating a monitoring system based on single channels, the costs of
machine protection systems are now much more affordable.
STI’s Strategy
Provide our Customers with a easy to use and maintain Low Cost Alternative to
expensive, centralized rack based Machine Protection Systems by:
•
•
•
•
•
•
Allowing Customers to make use of existing PLC and DCS systems.
Making use of Existing Networks.
Modular Design.
Distributive Design.
Low Cost
Keep it Simple (Kiss).
“Simply the Lowest Cost Approach to
Condition Monitoring”
Machine Condition Monitoring
Online System:
Continuous Monitoring and Protection
• Continuous Protection for Critical Machinery
• Real Time Data
• Ability to Connect to a PLC or DCS System
• Easily Expandable
Predictive Maintenance:
Scheduled Route Based “Check Ups”
• Generally for Non-Critical Machinery
• Requires Data Collector / Analyzer
• Data Must Be Taken From Same Location Each Time
• Unsafe Work Areas
• Machine Hazards
• Requires “Specialist”
Legacy Issues
•
•
•
•
•
•
•
Large centralized “Rack” based systems.
Control Room mounted.
Originally Capital Projects.
OEM supplied sensors.
All sensors wired to “Rack”
Requires lots of instrument wire and conduit (2x cost).
Large Racks do nothing that a PLC or DCS system cannot do.
• Overall Values.
• Time Delay.
• Power up inhibit.
• OK Circuit.
• 99% not wired to “Shutdown”.
• Many are ‘Obsolete”.
www.cmcpweb.com
Legacy Systems
GE Power Systems (Bently Nevada)
IRD/Entek
1700 Series
5000 Series
7200 Series
9000 Series
3300 Series
Unicell
5802 Series
5806 Series
5815 Series
5915 Series
What’s Changed?
Hardware
• PLC and DCS Systems are faster, cheaper and more common.
• Many Plants are upgrading to New DCS and PLC Systems.
• HMI Systems like Wonderware are available.
People
•
•
•
•
•
•
•
•
Vibration and machinery specialists are retiring, or spread out.
A lot of specialty work is contracted.
Engineers and Technicians are forced to be “Jack of All Trades”.
Operators are being assigned more tasks.
Users want smarter, simpler and easier to maintain systems.
Users are more budget conscious.
Engineers and Technicians are more computer oriented.
Major machine flaws have been fixed.
www.cmcpweb.com
Vibration Monitoring using PLC
Advantages:









Low Cost (1/2 Legacy Systems)
Simple to Install.
Can make use of existing sensors.
Distributive Architecture.
4-20 mA noise free.
Digital to save wiring costs
Choice of Protocol
Easy repair and replacement.
Local Dynamic Signal w/BNC.
Disadvantages:
 No Remote Dynamic or Transient Data.
www.cmcpweb.com
CMCP Monitoring Strategy
PLC/DCS
CMCP 420VT & CMCP420VT-T
Loop Powered Vibration Transmitters
“Simply, the Lowest Cost Approach to Machine Protection”
CMCP 420VT
Loop Powered, 2 wire Vibration Transmitter
Features Include:
 Solid State
 Velocity Output
 Loop Powered
 Integral Accelerometer
 4-20 mA Output
 100 mv/g Dynamic Signal Output
 2-2,000 HZ
 No External Housing Required
 No Special Extension Cable –
 Optional Bright LED or LCD Display w/ BNC
 Optional BNC Adaptor
 Optional Temperature
w/LED Display
w/BNC Adaptor
CMCP 420VT-T
Dual Parameter Loop Powered Vibration and Temperature Transmitter
Features Include:









Solid State
Velocity Output
Temperature Output
Loop Powered
Integral Accelerometer
4-20 mA Output
2-2,000 HZ
No External Housing Required
No Special Extension Cable
CMCP 420VT(T)
Accessories
CMCP420EL
CMCP420LED
CMCP420BNC
CMCP420WF
CMCP203
CMCP420XPHD
Why 4-20mA?
•
•
•
•
•
ISA Standard 4-20mA and 1-5 VDC
Standard Instrument Wire (pair)
Extremely Accurate.
Low voltages (typically 24 VDC).
Long distances can be handled.
• Voltage has resistance losses.
• 4-20 mA Current Constant anywhere on loop.
• Noise immunity.
• Instrument Technicians understand.
• Available IO Points
CMCP 500 Series
Transmitters and Monitors
CMCP 500 Series
Transmitters and Monitors
CMCP 500
Transmitter
CMCP 500A
Monitor
Rated For Use In Hazardous Areas
Class I Division II
Groups B, C and D
CMCP500 Series
Transmitter and Monitor Configurations
CMCP 525 Acceleration
CMCP 530 Velocity
CMCP535 Displacement (Velocity)
CMCP 540 Displacement (EP)
CMCP 545 Thrust Position (EP)
CMCP547 Differential Expansion (TSI)
CMCP548 Case Expansion (TSI)
CMCP549 Valve Position (TSI)
CMCP560 RTD Temperature
CMCP565 Thermocouple Temperature
CMCP570 Solid State Temperature
CMCP575 Speed
CMCP580 Process Variable
CMCP585 Eccentricity (TSI)
CMCP590 Acceleration Enveloping
CMCP595 Buffer Accessory Module
CMCP 500 Series Transmitters
Features Include:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Single Channel
Low Cost
Class I Division II Rated
CE
Small Size
Din Rail Mount
4-20 mA Output
24 VDC Powered
OK Circuit
Optional Filters
Buffered Outputs (2)
Selectable Ranges (5)
All Popular Sensors and Transducers
Easy Troubleshooting and Replacement
CMCP 500 Series Transmitters
CMCP 500 Series Transmitters
CMCP 500 Series Transmitters
CMCP 500A Series Monitors
Features Include:
• All Features of Transmitter
• 3 Alarms w/Relays
• OK
• Alert
• Danger
• Selectable Time Delay (.1, 1, 3, 6 and 10 sec.)
• Latching or Non-Latching Relays
• Reset Terminals
• Trip Multiply (2x or 3x)
• Outputs for Optional Display
• Meets API-670 (American Petroleum Institute)
• Easy Alarm Setup and Adjustment
CMCP 500A Series Monitors
CMCP 500A Series Monitors
CMCP 420VT vs. CMCP500 Series
Features:
CMCP420VT
CMCP500
4-20 mA Output to PLC/DCS
X
X
Loop Powered (2-Wire)
X
3-Wire
Velocity
X
X
Displacement
X
Acceleration
X
Enveloping
X
OK Circuit
X
Buffered Output
X
X
Optional Filters
X
High Temperature Applications
X
Selectable Ranges
X
Standard
Monitoring Systems
CMCP 5301-E(M)
Single Channel General Machinery Monitoring System
Features Include:
 Single Channel









Bright Red LED Display
Reset Button
Low Cost
4-20mA Output
Alert & Danger Alarms
Adjustable Time Delay
Trip Multiply
Transducer Fault Detection
Buffered Transducer Output
CMCP 5302-E(M)
Two Channel General Machinery Monitoring System
Features Include:
 Two Channel









Bright Red LED Display
Reset Button
Low Cost
4-20mA Output
Alert & Danger Alarms
Adjustable Time Delay
Trip Multiply
Transducer Fault Detection
Buffered Transducer Output
Great for Cooling Towers, Fin Fans, Hydro Turbines
and any low channel count application.
CMCP 5304-E(M)
Four Channel General Machinery Monitor
The CMCP5304 is a 4 channel monitoring system ideal for monitoring rotating
machinery such as pumps, fans, compressors, turbines, and motors. The General
Machine Monitor is equipped with 4 CMCP/CMCP530A Monitors alarming in
integrated velocity with a 100 mV/g ICP Accelerometer input.
Also Available with Stainless Steel Housing
CMCP1000
Dual Limit, Single Channel Vibration Monitor











Solid State Reliability
Class 1 Division 1 Rated
Integral Sensor (Optional External Sensor)
Two Levels of Alarm with Relays
True “OK” Circuitry with Relay
Adjustable Time Delays
Trip Multiply
4-20mA Output
Remote Reset
Optional Local Reset
Bright LED Digital Readout
Applications include Reciprocating Compressor Frame Vibration,
Fin Fans and replacement for any mechanical vibration switch.
CMCP5019
19" Rack Mounted 10-Channel Monitor
Features:
•
•
•
•
•
•
•
•
19" EIA Rack or Panel Mount - 2 DIN High
Individual Bright Red LED or LCD Displays
OK, Alert, and Danger Relays - Meets API-670
CE Approved
Terminals for Customer Wiring
Universal VAC Power
Optional -24 VDC Power Supply for Eddy Probes
Optional MODBUS or Ethernet TCPIP
Direct Replacement for Bently Nevada, Entech IRD and Other 19”
Rack Based Systems
CMCP500 Series Monitors
LOW COST CONDITION MONITORING PACKAGES
Custom Integration / Packaging











Custom Designs and Layout
Displays (common or individual)
Power Supplies
Custom Enclosures (XP, Nema4, 4x)
Intermediate Terminal Strips
IS Barriers
Field IO Interface
Ethernet TCP/IP, RS-485 Interface
Wireless
Web Enabled
Integration and Test (FAT)
Previous CMCP500 Series Projects
(12) CMCP530A Vibration Velocity Monitors .
Common Display with Channel Selector Switch,
Powder Coated Mild Steel, NEMA 4 Enclosure.
(7) CMCP525 Vibration Acceleration Transmitters .
High and Low Pass Filters, Intermediate Terminals
Fiberglass, NEMA 4X Enclosure.
(4) CMCP530 Velocity Transmitters, (2) CMCP545 Eddy
Probe Position Transmitters, and (1) CMCP575 Speed
Transmitter. Individual displays, Fiberglass NEMA 4X
enclosure.
Previous CMCP500 Series Projects
(12) CMCP540A Displacement Monitors, (2) CMCP545
Position Monitors, (2) CMCP530A Velocity Monitors and
(1) Phase reference output. Fiberglass NEMA 4X.
Explosion Proof System with CMCP530A Vibration
Velocity Monitors, Class I, Div. I, continuous monitoring
system for offshore Gas Turbine installation.
Requirements included IS Barriers, Slave Relays,
Independent Displays, XP Housing and 4-20mA output to
interface with a DCS system.
TSI System (14) CMCP540A Displacement Monitors, (2)
CMCP545 Position Monitors, (1) CMCP500A Eccentricity
Monitor, (1) CMCP500 Case Expansion and (1) CMCP500
Differential Expansion. Painted Steel NEMA 4 Enclosure.
Top Sales Performers
CMCP1100 Series
Industrial Accelerometers
Features Include:
Standard
CMCP1100
High Temp.
CMCP1100H
Side Mount
CMCP1100S
 LOW COST (Only $99.00 for 5 Meter System)
 Small Size Case, 1/2” x 1.05”
 Small Footprint, 1/2”
 Integral Cable (5, 10 or 20 Meters)
 100 mV/g Sensitivity
 0.32 Hz to 10 KHz Frequency Range (± 3 dB)
 Waterproof
CMCP1100C
M8 Connector
New!
CMCP1300 Series
Industrial Triaxial Accelerometers
Features Include:
 Low Cost
 Small Size Case, 1.5” x 1.5” x 0.9”
 Cable (5, 10 or 20 Meters)
 100 mV/g Sensitivity per channel
 10% Accuracy
 0.32 Hz to 10 KHz Frequency Range (± 3 dB)
 Waterproof
New!
Accelerometer Accessories
Mounting Pads
Adhesives
Motor Fin Mounts
Extension Cables
NPT Adapters
Accelerometer Housing
BNC Junction Boxes
Piloted End Mill
Intermediate Termination
Boxes
CMCP250
Accelerometer Mounting Kit
25
2
2
2
2
25
25
1
1
1
1
1
1
12
2
CMCP-200-02 Mounting Pads
CMCP-205-01 Motor Fin Mount
CMCP-205-02 Motor Fin Mount
CMCP-205-03 Motor Fin Mount
CMCP-205-04 Motor Fin Mount
CMCP-230-01 1/4" x 28 UNF x 1/2"
CMCP-230-02 1/4" x 28 UNF x 3/4"
CMCP-701 Spot Reamer
CMCP-721-02 1/4 x 28 UNF Tap
Tap Handle
CMCP-211 Adhesive and Activator
CMCP-212 Silicon Dielectric
CMCP-213 Silicone Sealant
CMCP-208 Mixing Nozzles
CMCP-206 Adhesive Filler
CMCP300 Series
BNC Switchbox
Features Include:
 Low Cost
 1, 2, 4 and 6 Channel
 Available in Fiberglass, Painted Steel or SS
 Water Tight & Dust Tight
 External or Internal BNC & Switch Available
 Provide convenient and safe access to signals
CMCP310 Series
BNC Switchbox
Features Included:
 Low Cost
 6 and 12 Channel
 Terminate & Switch outputs of up to 48 sensors
 Available in Fiberglass, Painted Steel or SS
 Water Tight & Dust Tight
 External or Internal BNC & Switch Available
 Provide convenient and safe access to signals
CMCP305 Quick Access
BNC Junction Box
Features Include:
 Low Cost
 2 and 4 Channel
 Provide convenient and safe access to signals
 Indoor Use Only
CMCP312 Din Rail
BNC Box
Features Include:
 Din Rail Mounted
 12 Channel
 Low Cost
 Provide convenient and safe access to signals
 Indoor Use Only
CMCP303 Triaxial
Connection Box
Features Include:
 Low Cost
 2 and 4 Triaxial Accelerometers
 6 and 12 Ch.
 Available in Fiberglass, Painted Steel or SS
 Water Tight & Dust Tight
 Provide convenient and safe access to
Triaxial signals
New!
Eddy Probe Accessories
CMCP801
 Meets API670 external mounting specifications
 304 and 316 Stainless Steel
 Provided with four 3/4" NPT Hubs
 3/4" or ½” NPT Case Entry
 Machined aluminum
 Threaded and slotted to insure position and stability
CMCP805
 Machined 304 Stainless Steel
 ½” and ¾” NPT External Threads
 ¼” x 28 and 3/8 ” x 24 Internal Threads
CMCP4190
CMCP610
Eddy Probe Calibrator
Features Include:
Eddy Probe Graph
-24
-22
-20
-18
-16
-14
-12
-10
-08
-06
-04
-02
Volts
10
20
30
40
50
60 70 80
90 100 Gap
• Verify Voltage Output vs. Gap
• For use with 5mm & 8mm Probes
• Precision Micrometer
• 4140 Target
• Graph Paper & Excel Spreadsheet
Wireless Industrial Radios
Features Include:
Ethernet Model











Class I, Div II, Group’s A,B,C,D.
Superior noise immunity.
Frequency Hoping.
Worldwide Unlicensed 2.4 GHz.
Ethernet (TCP/IP, Ethernet/IP, Modbus/TCP, etc.)
MODBUS RTU RS-485, RS-422, RS-232.
32 Frequency Channels.
Up to 16 mile range w/ Hi Gain Antennas.
Can be extended with Repeaters.
250 Kbps RF Data Rate.
Easy to Configure.
Lowers Cost of Wiring and Installation
CMCP1210 Series
Spring Loaded Temp. Sensors
Features Include:
• Tip Sensitive RTD or Thermocouple
• For use to 260º C (500º F)
• Adjustable Spring-Loaded Holder with Fluid Seal
• Aluminum Connector Head – Optional XP Head
CMCP 800
Balancing Accessories Kit









Hard Carry Case
CMCP6160 Printer Adapter
Digital Scale
CMCP630 A/B Switch
(2) CMCP2100 Accelerometers
(2) CMCP625 2 Pin to BNC Adapter
(3) 25’ BNC/BNC Cables (A,B,Phase)
(2) CMCP908-MD Magnet
Optical or Laser Phase Reference Kit











CMCP6156 Magnetic. Goose Neck
Custom Vice Grip
Assorted Balance Weights
Banana to BNC Adapter
Hex Key Set
Tape Measure
6” Stainless Steel Rule
6” 180º Protractor
Compass
Clip Board
Polar Plot Tablet (50 sheets)
CMCP811
Balance Weight
Starter Kit
CMCP810
Electrical Runout Kit
Features Include:
 Oscilloscope
 Optical Phase Reference Kit
 Eddy Probe System
 Power Supply
 Magnetic Mounts
 Custom Vice Grips
 “Bucking” Amplifier
 Hard Carrying Case
 Optional Gauss Meter
 Option Software
CMCP TACH3-XP
Explosion Proof Class I Division I Tachometer
Features Include:










Replaces Old Dymac M746
Front Panel Programmable
5-999,999 RPM Selectable Range
1 or Multiple Pulses per Revolution
0.001% Accuracy
Alert and Danger Alarms
4-20mA and 0-5 Vdc OutputRS232 Output
Eddy Current Probe Input
High & Low RPM Recall
0.56” H, Seven Segment LE
CMCP601
Rotor Kits
Measurements may be obtained to study:
CMCP601
Dynamic Motion Demonstrator
Available in Short or Long Base
 Frequency Based Signals
 Time Based Signals
 Orbital Analysis
 Shaft Runout
 Shaft Bow
 Identify Rotor Critical Speeds
 Resonance Amplitude Factor
 Phase Analysis
 Balancing
 Shaft Relative & Case Absolute
 Rotor Dynamic Studies
CMCP600
Bearing Fault Demonstrator
Features Include:
CMCP600
Bearing Fault Demonstrator
 1700/1400 RPM AC Motor
 Quick Bearing Change
 Easy to Use
 Repeatable Results
 Carrying Case
 (2) Rolling Element Bearings
(1) “Good Bearing”
(1) “Fault Induced Bearing”
Custom Products
and Integration
CP Products (Custom Products)
•
•
•
•
•
•
•
Custom Enclosures
Free Standing Cabinets
Component Integration
Drawing and Engineering Services
Custom HMI Applications
Custom Cables
Specialty Sensors
• Custom Enclosures
• Free Standing Cabinets
• Drawing & Engineering Services
(AutoCAD)
• Custom Packaging (Kits)
• Battery Powered Monitors
• Wonderware HMI
• Integration Services
• Test and FAT
Cabinet / Panel Design and System Integration
Over 250 integrated Custom Panels and Enclosures
Customers Include:















Aramco (Abqaiq, Sadaf, Ras Tanura, Shayba, Riyadh)
Black & Veatch
Brown & Root
Caltex
Fisher Rosemont
BHEL
Wyle Labs
Chevron USA
BP Amoco
M&M Mars
Champion Paper
E.I. Dupont
Ebara International.
Baxter Wilson Unit 1 and 2
City of Portland, Oregon
… and many more
Case Histories
Case History #1, Wireless MCT
Customer:
Dynegy
System Type:
Coal Crushers
Location:
2 Locations, Illinois, USA
Salesperson:
Gary Gbur
Value:
$40,000.00 Phase 1
$200,000.00 Phase 2
Year Installed:
2004 / 2005 /2008
Case History #1, Problem and Solution
Case History #1, Problem and Solution
The Problem
• Coal crushers with embedded accelerometers needed
monitoring.
• User wanted to use existing DCS system.
• Existing system was not working properly.
• User unwilling to pay for conduit and instrument wire.
• Low speed bearings needed enveloping.
The Solution
• Velocity and Envelope Acceleration Transmitters (some
slow speed).
• 16 Channel A/D Converter using Modbus TCP/IP Ethernet
• Industrial Ethernet Radio Modem
• No lost packets. Very robust system
• Both Modbus RS-485 and TCP used.
Case History #1, Implementation
Two vendor solutions were employed side-by-side, each system
monitoring different parts of the pulverizer.
Case History #1, CMCP Success Story
After eight weeks STI
was chosen to
provide the wireless
vibration monitoring
solution, when the
other vendor’s
solution failed to
provide reliable and
continuous service.
Case History #2
Customer:
Xcel Energy
System Type:
TSI System
Location:
Saint Paul, Minnesota, USA
Salesperson:
Frank Howard
Value:
$60,000.00
Year Installed:
2004
Case History #2, Problem and Solution
Case History #2, Problem and Solution
Problem:
• TSI system for GE Turbine Generator Set
• Customer wanted to use existing new DCS system
• Wanted local display for operators
• Intermediate terminals to save installation time
Solution:
• CMCP500 Series Transmitters.
• Pre-wired integrated custom panel.
• 4-20 mA loop to DCS.
• Custom mimic panel w/displays.
Case History #2
Case History #3
Customer:
WDC
System Type:
Critical Fans
Location:
Pine Bluff, Arkansas, USA
Salesperson:
David Gallagher
Value:
$160,000.00
Year Installed:
2004
Case History #3, Problem and Solution
Problem:
• 6 IRD/Entek 5815 monitors mounted in outdoor cabinets.
• Critical service on high temperature furnace fans.
• IRD/Entek no longer supported.
• Primary competition: BNC
• 1 vibration channel.
• 8 temperature channels.
Solution:
• CMCP530 transmitter.
• Analog to digital converters with direct RTD input.
• 15” industrial touch screen rack mount computers.
• Custom Wonderware HMI with bargraphs.
Case History #3
Case History #3
Case History #3
Case History #3
Main Screen
Alarm List
Historical Trend
Real Time Trend
Real Time Trend
Setup
Case History #4
Customer:
Xcel Energy
System Type:
TSI System
Location:
Saint Paul, Minnesota, USA
Salesperson:
Frank Howard
Value:
$60,000.00
Year Installed:
2004
Case History #4
Problem:
• Large Kinetic UPS System Monitoring.
• Vibration, Enveloping, Temperatures, Speed, Pressures.
• Flywheel Diameter Calculation.
Solution:
• CMSS530, CMSS590, CMCP540 and CMCP545 Transmitters.
• Process Variables direct to ADC.
• 12.1” Touch Screen Rack Mount Industrial Computer.
• Custom Wonderware HMI.
Case History #4
Case History #4
Main Screen
Real Time Trend
Alarm List
Historical Trend
Real Time Trend
Setup
Case History #5
Customer:
Aramco
System Type:
Reciprocating Compressor
Location:
Saudi Arabia
Salesperson:
Zyad Al-Irhayim
Value:
$120,000.00
Year Installed:
1999
Case History #5
Case History #5, Problem and Solution
Problem:
• Monitor Large Reciprocating Compressor in Hydrogen Service.
• Frame and Crosshead Vibration.
• Rod Drop.
• Valve Temperature Monitoring (Averaging)
Solution:
• CMSS530, CMSS545, CMCP560 Transmitters.
• Field IO.
• Explosion Proof Enclosures
• 17” Touch Screen Rack Dell Computer.
• Custom Wonderware HMI.
Case History #5
Main Screen
Bar Graph Screen
Current Alarm List
Historical Alarm List
Case History #5
Historical Trend
Real Time Trend
Historical Trend
Setup
Case History #6
Customer:
Exxon
System Type:
13 x Ex. MCT Systems
Location:
Singapore
Salesperson:
Mike Howard
Value:
$ 100,000.00
Year Installed:
2010
Case History #6
Case History #6, Problem and Solution
 Equipment to monitor: 13 x Vertical Pump motors / 350KW
 Motor Drive & non- Driven end
Problem:
• Open environment in intrinsically safe area (Refinery segment)
• Access to buffered signal
• Display for each channel
• Cost considerations
Solution:
• 13 MCT systems in explosion-proof enclosures
• BNC Junction boxes for easy access to the buffered signal
• Safety barriers
Case History #6
Explosion proof Monitoring System
4 channels with local display
Power Supply
Intrinsically safety barriers and BNC junction box
Case History #6
Case History #6
Ready for Shipment from Houston
Case History #6
Installation
Who To Contact?
Distributer Sales and Support:
Matt Howard
matthoward@stiweb.com
281.334.0766 ext. 1
Custom Applications/Technical Support:
Mike Howard
mhoward@stiweb.com
281.334.0766 ext 4
Accounting:
Natalie Henderson
nhenderson@stiweb.com
281.334.0766 ext 3
Order Status:
Mark Tomlin
mtomlin@stiweb.com
281.334.0766 ext 5
Purchase Online Quick and Easy at
www.stiwebstore.com