Schmidt & Danielsen a/s
– Establised in 1964 mainly as a service company in the refractory business
without technical support.
– In 1985 Søren Danielsen took over and developed the company so that we, in the
last 25 years have worked as a complete refractory buisness (Technic design,
trade, and prof. execution of new orders and doing maintanance). Mainly based
on danish customers but also carrying out jobs in hole Europa
– For nearly 50 years Hasle Refractories has been delivered Refractory bricks,
castable, mortars etc. to Schmidt & Danielsen
This is what we are:
– S&D is a family owned company. We have 5 technical -, 2 adm. -, 2 prod.and 10-20 installation peoble employed. Annual turnover has been round 4 mill
€/year over the last 5 years period.
This is what we do:
– Makes refractory sollution mainly in waste- and biomass boilers, but also industri
and cremation ovens.
Why refractory in furnace and boilers
– It was back in 1964, where we started, without discussion to prevent heat from
furnaces and boilers to come out in the free.
– So it is also to day in many plants. Cement, Petrochemical, etc.
– In the big plants where they makes electricity and district heat out af waste, it has
change over the last 15 years. To days plants almost can function without
refractory. Bare steamboilertubes with or without Inconel clading can do it - but,
– However to make sure that the furnace and boilers runs in a proper way without
poluting the suroundings, the gas coming out of the flames shall be kept above
850 dg. C for 2 sec. after the last secundairy air put in.
– This rule goes for every type of plant making energy out of waste, biomas etc.
Hasle materials together with our technology can do it
Hasle Refractories big range of low cement castables has excelent properties.
They have good alkali resistence, have excelent strength, low porosity and are
quite good working with.
This is what we do:
– The next slides shows some cases where we have taken that benefit and put it
into projects.
•
•
•
•
•
•
•
•
•
Waste incinerator TAS, Kolding.
Country
Industry
Plant name:
Main equipment supplier:
Production capacity:
Number of production lines:
Run factor
Installation materials
Sidewalls and roof above the grate
Denmark
Waste incinerator
TAS, Kolding - furnace 5
B&W Vølund
app. 12 t waste/hour
2
0,95
D39A, D59A, D 66, D1700A
50 mm thickness vibrated in
shuttering. Fixed with 65
anchors /m2.
Schmidt & Danielsen a/s
– Tas - ovn 5
•
•
•
•
•
•
•
•
•
Waste incinerator Indaver, County Meath, Ireland.
Country
Ireland
Industry
Waste incinerator
Plant name:
Indaver, County Meath
Main equipment supplier:
B&W Vølund A/S
Production capacity:
app. 25 t waste/hour
Elektricity only
Number of production lines:
1
Run factor
0,95
Installation materials
D39A, D59A, D 66, D 65 TA
Main figures
220 m2 tubewall with 50 mm
thick lining cast in D 65 TA
Schmidt & Danielsen a/s
– Irish Meath
•
•
•
•
•
•
•
•
Biomass furnace for smaller energiplants to district heating.
Country
Denmark and europe
Industry
Biomass for district heating
Plant name:
Several
Main equipment supplier:
Justsen Energi, Århus
Production capacity:
5-20 MW plants
Boiler type
Low pressure – 120 dg. C
Installation materials
D59A precast
Main figures
10-20 m2 area with tiles
precast arch 1,5 – 3,7 m span
Schmidt & Danielsen a/s
– Justsen - Kibæk
•
•
•
•
•
•
•
•
Biomass furnace for larger energi plants
Country
France and Italy
Industry
Biomass for electricity and
heating up factories.
Plant name:
Cofely, France – Zignago,
Italy
Main equipment supplier:
Aalborg Energi Technik AET
Production capacity:
55 MW plants
Boiler type
Steam tube boiler
Installation materials
D59A precast
Main figures
50 m2 split area with tiles
Schmidt & Danielsen a/s
– AET Frankrig
•
•
•
•
•
•
•
•
Biomass furnace for burning garden waste and other bad biomass.
Country
Denmark
Industry
Biomass for district heating
Plant name:
Bogense
Main equipment supplier:
Dall Energy
Production capacity:
10 MW plants
Boiler type
Uncooled furnace
Installation materials
D59A
Main figures
40 ton of D 59 A casted on top
gunned backup insulation
Schmidt & Danielsen a/s
– Weiss - Bogense
How to make functional maintanence and service at refractory
• Make good solution at start. Good materials, good anchoring, correct
expansions etc
• By every stop make sure that expansion joints are in good shape
and not filled with slag. Put in new expansion materials.
• By every inspection make notes on the drawing if any repairs has
been made and make a forcast for next revision, so it could be
prepared.
• Its a good thing to have a schedule going 5 – 10 years in the future
so the plant owner can have it in his budget.
Schmidt & Danielsen a/s
– Tas - ovn 5. Revisioner.
Can Hasle Refractories LCC materials been given a longer life time?
• With good and planed service – yes.
• With good and carefull operation of the plant. Avoid high peaks,
avoid melted slag.
• Pre-protection of a lining has been tried before. Lately test have
been carried out to make LCC construction more gas teight,
– After drying out the materials to 110 dg the surface is cured by spraying the
material on the surface. It penetrate and fill out all smaller holes and chracks
– After heating it up again the surface is given a 2 layer coating.
– This can be done the year aften when the plant is out of operation.
• It has been testet by the Danish manufacture company at a plant in
sweden. We have cured tiles for 1 of the AET plants and the
costumer have ordered the same curing for next delivery. They are
very satisfied with the tiles compared with tiles witout coating.