Rejuvenated MiCOM P40
Double the practicality
Henri GRASSET
Summer 2014
Schneider Electric - Infrastructure – Henri GRASSET – June 2014
1
Double the Practicality
Double the security – further enhanced cyber security with RBAC
Double the interoperability – IEC61850 Ed1 & Ed2
Double the availability
•Dual IP ports – 2 Independent Ethernet Channels
•Seamless and unparalleled redundancy with HSR & PRP
Double the quality
•Long proven protection algorithms
•Upgraded with well-known Schneider Electric Quality
Double the service – QR code for supporting information
Double the ease-of-use – advanced MiCOM S1 Studio tool
Schneider Electric - Infrastructure – Henri GRASSET – June 2014
2
IEC 61850 based Protection Schemes
Latest standards
Fully secure, from product to solution
Cost optimized and Reliable
Enabled by powerful new Ethernet
Schneider Electric - Infrastructure – Henri GRASSET – June 2014
3
New powerful Ethernet solutions
●Hardware:
● Dual IP ports (2 IPs)
● PRP* and HSR* redundancy (IEC 62439)
● Universal Irig-B port (Modulated and un-modulated)
●Software enhancements:
● IEC 61850 Ed. 2 (and Ed.1)
● Cyber Security evolutions
● E3 requirements (Spain)
*PRP: Parallel Redundancy Protocol
*HSR: High-availability Seamless Redundancy
Schneider Electric - Infrastructure – Henri GRASSET – June 2014
4
Cost optimized and Reliable
● PRP* and HSR* communication redundancies
● Choice made via configuration
● Allows seamless redundancy (no loss of any information)
● Optimizes the Ethernet network availability and cost
● Dual port (2 IP Addresses)
● Choice made via configuration
● Allows two physically segregated /independent networks
●Universal Irig-B (Modulated and un-modulated)
● Plug & Play: No need of configuration
● Easy to connect to any kind of Irig-B technology
IEC 62439 Standard:
*PRP: Parallel Redundancy Protocol
*HSR: High-availability Seamless Redundancy
Schneider Electric - Infrastructure – Henri GRASSET – June 2014
5
Fully Secure
●Cyber Security
● A “Must have” requirement in many countries and environments
●Not only about ”Cyber” attacks
● Enables:
● Confidentiality,
● Integrity,
● Availability & Authentication,
● Non-Repudiation,
● Accountability, Traceability & Detection
●Available now!
● Standard in the latest MiCOM P40
● Configuration security enabled by the Security Admin Tool (SAT)
Schneider Electric - Infrastructure – Henri GRASSET – June 2014
6
Latest Standards
● IEC 61850 Edition 2.0 (or Edition 1)
● Choice made via configuration
● Open, interoperable and well recognised standard
● Reduces Engineering time and allows better interoperability
● Spain E3 requirements:
● Essential for Spanish Utilities and Spanish influenced markets
● HSR and PRP
● CID* file transfer via Ethernet for Ed2 (“MCL” file for Ed.1)
● Time synchronization configuration and monitoring to E3 requirements
Schneider Electric - Infrastructure – Henri GRASSET – June 2014
*: Configured IED Description
7
Why Dual IP?
●Ethernet has become the main technology for Protection & Control
●Redundancy is a fundamental necessity for Protection Schemes based on
GOOSE and especially for high availability environments
●Standardized HSR, PRP (active redundancy) enables:
● Interoperability and Interchangeability
● 0 ms reconfiguration time, thus no loss of data (as no reconfiguration)
● Full compatibility with the IEC 61850 requirements
LAN A
LAN B
P40
P40
P40
Schneider Electric - Infrastructure – Henri GRASSET – June 2014
P40
P40
P40
8
Optimised Network Topology 1/2
HSR for Protection
HSR for Protection
Ring A
Ring B
Control
RedBox
RedBox
Network 1
Schneider Electric - Infrastructure – Henri GRASSET – June 2014
9
Optimised Network Topology 2/2
HSR
HSR
Ring A
RedBox 1
Ring B
RedBox 2
PRP
RedBox 3
RedBox 4
Network 1
Network 2
Schneider Electric - Infrastructure – Henri GRASSET – June 2014
10
Implementation
●Dual IP Ethernet allows 2 fully segregated Station Bus networks
●Realistic examples include:
● Duplicated Network for Protection and Control (P&C)
● Segregated Networks for Control….. And for Protection
● Segregated Networks for P&C ..... And for Maintenance
● Segregated Networks for P&C ..... And for Digital Fault Recording System (DFRS)
● Segregated Networks for P&C ..... And for I/O expansion with P849
DCS
Schneider Electric - Infrastructure – Henri GRASSET – June 2014
11