Project Idea Presentation: COST EFFECTIVE PROCESS HEAT PUMPS FOR INDUSTRIAL HEAT RECOVERY SUSTAINABLE PROCESS INDUSTRY EUROPEAN INDUSTRIAL COMPETTIVENESS TROUGH RESOURCE AND ENERGY EFFICIENCY CENTRE FOR RENEWABLE ENERGY SOURCES AND SAVING (CRES) WIND • Resource assessment and wind farm performance in complex terrain • RTD&D on large wind turbines and farms (wakes) • Advanced measuring systems, including remote sensing • Increasing interest for deep offshore applications (including floating WT) BIOMASS • Bioenergy chains/bio refinery including logistics and end-use • Biofuels for transport, emphasis on feedstocks, techno-economics, EA/LCA • Increasing interest for thermochemical conversion techs (gasification, etc) GEOTHERMAL • Ground-source systems, low & medium enthalpy geothermal energy • Innovative applications (GSHP, ORC, MED, EGS) • Heat pumps/ORC electricity generation/Desalination with Thermal Methods WATER TECH. • RTD&D Wave and Tidal (reducing our attention) • Hydro Power for energy storage (increasing our attention for pump storage) HYDROGEN & RES • Clean hydrogen production from RES • Integration in the power system, DER, Storage • Pursuing the H2-Island PV SYSTEMS & DER • Emphasis on balance of system issues • DTD&D on DG / DER, hybrid systems • Storage tech. Emphasis on batteries SOLAR THERMAL • RTD&D, Solar Cooling, Combi • Concentrated Solar Power Generation (CSP) WWW.SPIRE2030.EU 2 Project Idea Concept Heat recovery from low temperature (<100ºC) process waste streams with the aid of high temperature heat pumps, in order to produce hot water or process steam, which will be utilized to partially cover plants needs in process heat. Technology development, demonstration in 2 industrial plants, monitoring & validation. WWW.SPIRE2030.EU 3 Project Idea Concept • SPIRE PROCESS Key Action 2.2: Energy harvesting, storage and reuse • Horizon topic EE 18 2014/2015: New technologies for utilization of heat recovery in large industrial systems, considering the whole energy cycle from heat production to transformation, delivery and end use. • BUDGET ~6 million euro EU funding ~3.5 million euro • Project duration: Jan 2015 – Dec 2018 WWW.SPIRE2030.EU 4 Idea Impact 1. 2. 3. 4. 15% of process heat recovered and reused Turn-key solution with wide replication potential Payback <3 years Technology applicable to all industrial sectors WWW.SPIRE2030.EU 5 Existing Project Consortium 1. CRES • coordinator • heat pump technology development • conceptual design • monitoring & technology validation • innovation related activities • dissemination 2. IDENER • processes design, modelling and control • heat recovery strategies 3. IZNAB • industrial process modelling WWW.SPIRE2030.EU 6 Looking for partners… 1. 2. 3. 4. 5. HEAT PUMP MANUFACTURER • Heat pump technology development • Heat pumps manufacture COMPRESSOR MANUFACTURER • Development & manufacture of compressors HEAT RECOVERY EQUIPMENT MANUFACTURER • Supply of heat recovery equipment 2 INDUSTRIAL ENTERPRISES • Install & operate pilot systems TECHNOLOGY CENTRE • Heat pumps laboratory testing WWW.SPIRE2030.EU 7 Contact details Dimitrios Mendrinos Centre for Renewable Energy Sources & Saving 19th km Marathonos ave 19009 Pikermi Attikis, Greece http://www.cres.gr/ Email: dmendrin@cres.gr WWW.SPIRE2030.EU 8