Welcome to Sanforce
Introduction of Sanforce
 Sanforce Technology (Shenzhen) Co., Ltd is specialized in
manufacturing and supply of emergency lighting power
products.
 6 years of experience in emergency light power supply and more
than 15 years of rechargeable NiCD /NiMH battery
manufacturing. Capable to provide battery back- up solutions for
emergency lighting system.We also dedicate to provide fully
bespoke lighting power solutions built to exact client
specification.
Let no power failure
leave you
in the dark
Sanforce Technology Shenzhen LTD
Why emergency lighting is important?
 Emergency lighting is really essential
for any home and public construction.
Usually this refers to a lighting fixture
that is specifically intended to provide
light for a crisis, or power outage.
 There are also varying types of emergency lighting products, each
lending themselves to certain situations in different ways. Some of
the most common types are escape route fixtures, emergency
standby lighting, and safety lighting.
Legal Requirements
It is essential that your emergency lighting system conforms to
current UK and European regulations. Failure to do so could put
you and your business at risk of court proceedings and large fines.
Ultimately, you will be risking lives if you do not strictly adhere to
all aspects of safety in the workplace.
Resources to consider include:
 The Building Regulations 2000-2005 Edition
The Fire Safety Order 2005
The Health & Safety (Safety Signs & Signals) Regulations 1996
Local authorities should also be consulted as they can often have safety license requirements for
certain types of premises (e.g. places where the public convene such as pubs and cinemas).
Other types of premises (e.g. schools and hospitals) are required to have fire safety inspections.
How does emergency light work?
 Most emergency lighting will run off
of battery operated power that you
install with the emergency lighting
fixtures. This is so that the lights
will successfully operate in any
situation during a power outage.
The most important part is the
Emergency Conversion Kit.
The control circuit of emergency kit monitors the mains supply,
if the light works as normal, the inverter allows the charger to
trickle charge the battery pack in standby mode.
In the event of an earthquake, explosion, accident or other
emergency which results in the AC power supply to fail, the
inverter automatically activates the battery backup system and
switches the light on in less than 0.1 second.
The system can be programmed an emergency running time of 1
/2/ 3 hours depending on different battery packs to meet the
requirements under various conditions.
What is Emergency Conversion Kit
 Ideal for integrating into existing control gear
 Supplied with a fused terminal block and pre-cut
connection wires.
 The modules can be tuned specifically to the lamp,
giving better performance for the cell capacity.
 it provides instant backup lighting when the normal
power fails. These units as the name suggests are
used for converting existing luminaries into
emergency one.
 Each unit works in conjunction with the existing
ballast/LED driver to convert new or existing
luminaire fittings into emergency equipment.
Emergency Lighting Operation Type
 Maintained Operation
When in maintained operation the lamp of an emergency luminaire stays on constantly at all
times and stays lit for the minimum emergency duration after a mains failure.
In one word, lamp only lights when mains fail
 Non-Maintained Operation
When in non-maintained operation the lamp of an emergency luminaire will only light in the
event of a mains failure and will stay lit for the minimum emergency duration required.
In one word, Lamp can light when mains is present and will light when mains fail.
Please Note: Maintained units are capable of being wired to enable non-maintained operation.
 SUSTAINED
In the event of mains power failure one of the lamps remain illuminated by automatically
getting switched to the integral battery source meanwhile at least two or more lamps is
energized during normal mains supply.
In one word, There are two lamps, one only works when mains fail and the other only
works when mains is present.
Easy installation and convenient usage
 This emergency device can be integrated with the normal LED lighting
system and Fluorescent lamp based on specified requirement, e.g.
demanded emergency output power/emergency back-up time..etc.
Keep you out of darkness
ALL THE
TIME!
Sanforce Technology Shenzhen Co.,Ltd.
 Add: No.29,Longfeng Road, Longgang District, 518116,Shenzhen,
China
 Tel: +86-755-89648670
 Fax: +86-755-89648671
 Mobile phone: +86-13530283527
 Skype:jenny.emergencypower
 Email: info@sanforce-tech.com
 website: www.sanforce-tech.com