CSC303
Team 1
Introduction
 Use a Cisco 7600 technology to connect the following
networks:
 2 OC3 Ethernets -- fiber
 2 T3 Ethernets -- fiber
 8 T1 Ethernets -- twisted pair Cat 5
 30 100baseT networks
 2 1000baseT uplinks to The Internet
Packet Over SONET/ SDH (POS)Cards
Available











Cisco 2-Port OC-3 POS SPA
Cisco 4-Port OC-3 POS SPA
Cisco 1-Port OC-12 POS SPA
Cisco 1-Port OC-192 POS/RPR SPA
2-Port OC-48 POS/DPT
1-Port OC-48 POS
2-Port OC-12 POS
4-Port OC-12 POS
4-Port OC-3 POS
8-Port OC-3 POS
16-Port OC-3 POS
Cisco 4-Port OC-3c/STM-1c POS
Shared Port Adapter
 2 OC3 Ethernets – fiber
http://www.cisco.com/en/US/prod/collateral/modules
/ps6267/product_data_sheet0900aecd8027cb4d.html
Serialized/Channelized Cards Available
 Cisco 4-Port Serial SPA Data Sheet
 Cisco 8-Port Channelized T1/E1 SPA
 Cisco 2-Port Channelized T3 SPA
 Cisco 4-Port Channelized T3 SPA
 Cisco 2-Port Clear Channel T3/E3 SPA
 Cisco 4-Port Clear Channel T3/E3 SPA
 1-Port ChOC-12 to DS3
 1-Port ChOC-12 to DS0
 12-Port CT3 to DS0
Cisco 4-Port Channelized T3 (DS-0)
Shared Port Adapter
 2 T3 Ethernets -- fiber
http://www.cisco.com/en/US/prod/collateral/modules/ps6
267/product_data_sheet0900aecd8027cb3f.html
Ethernet Cards Available








Cisco 2-Port GE SPA
Cisco 5-Port GE SPA
Cisco 10-Port GE SPA
Cisco 1-Port 10-GE SPA
GE-WAN-2
Cisco 4-Port 10GE
ES20 2-Port 10GE
ES20 20-Port GE
 Express Forwarding 256 10/100/1000 Interface
Module
 10 Gigabit Ethernet
Cisco Express Forwarding 256
10/100/1000 Interface Module
 8 T1 Ethernets -- twisted pair Cat 5
 30 100baseT networks
 2 1000baseT uplinks to The Internet
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/pr
oduct_data_sheet0900aecd8017376e_ps4835_Products_Data_Sheet.html
Cisco 7600
http://www.cisco.com/en/US/products/hw/routers/ps368/prod_models_comparison.html
Cisco 7604
 4 slots available
 Backplane Capacity: 320Mbps
 Two power sources
Cisco 7604 Layout Diagram
Network Diagram
Conclusion
 Explanation for each cards chosen:
 Cisco 4-Port OC-3 POS SPA

We decided to choose this card over the others available because it supports four
OC-3 ports in a half card and we will have available ports for future expansions.
 Cisco 4-Port Channelized T3 SPA
 For this type of connection we decided to go with 4 ports for future expansion and
we only had two options: the 4-port channelized T3 SPA and 4-port clear channel
T3/E3 SPA
 We chose the 4-port channelized because the it is unnecessary to have support for
E3 ports (E3 ports are used in European countries).
 Cisco Express Forwarding 256 10/100/1000 Interface Module

This card supports the remaining requirements for this project, and leave 8 empty
ports for future expansion.



8 T1 Ethernets -- twisted pair Cat 5
30 100baseT networks
2 1000baseT uplinks to The Internet
Bibliography
 http://www.cisco.com/en/US/products/hw/routers/ps
368/products_relevant_interfaces_and_modules.html
 http://www.cisco.com/en/US/products/hw/routers/ps
368/prod_models_comparison.html
 http://www.cisco.com/en/US/products/ps6316/index.
html
 http://www.cisco.com/en/US/products/hw/routers/ps
368/products_relevant_interfaces_and_modules.html