Solar Frontier Europe GmbH
Product Data Sheet SF165-S
Electrical Characteristics
Electrical Performance at Standard Test Conditions (STC)*1
SF165-S
Nominal Power
Pmax
Power tolerance
165 W
+5 W / 0 W
Open circuit voltage
Voc
110.0 V
Short circuit current
Isc
2.20 A
Voltage at nominal power
Vmpp
85.5 V
Current at nominal power
Impp
1.93 A
Electrical Performance at Nominal Operating Cell Temperature (NOCT) Conditions*2
SF165-S
Nominal Power
Pmax
123 W
Open circuit voltage
Voc
100 V
Short circuit current
Isc
1.76 A
Voltage at nominal power
Vmpp
80.2 V
Current at nominal power
Impp
1.53 A
Performance at Low Irradiance
Efficiency reduction of maximum power from an irradiance of 1,000 W/m2 to 200 W/m2 at 25 °C is typically 2.0 %.
The standard deviation for the reduction of efficiency is 1.9 %.
*1 Standard Test Conditions (STC): 1,000 W/m2 irradiance, module temperature 25 °C, air mass 1.5. Isc and Voc are ±10 % tolerance of STC rated values. Module output may rise due to the Light Soaking Effect. Subject to simulator measurement uncertainty (using best-in-class AAA solar simulator and applying Solar Frontier
preconditioning requirements): +10 % / -5 %.
*2 Nominal Operating Cell Temperature Conditions: Module operating temperature at 800 W/m2 irradiance, air temperature 20 °C, wind speed 1 m/s and open circuit condition.
Typical I-V Characteristics at STC
I-V P-V Characteristics by Irradiance
Model: SF165-S
Condition: AM 1.5 / 25 °C
2.50
250
1,000 W/m2
2.00
200
600 W /m
2
2.50
1.00
Current [A]
150
250
100
400 W/m2
1,000 W/m2
2.00
0.50
1.50
0.00
I-V P-V Characteristics by Irradiance
Model: SF165-S
Condition: AM 1.5 / 25 °C
200
50
200 W/m2
800 W/m2
150
0
2
0 600 W /m20
40
60
80
100
Voltage [V]
1.00
120
100
Typical characteristics
400 W/m2
200 W/m2
I-V Characteristics by Temperature
0.50 Characteristics
Thermal
0.00
Temperature
coefficient of Isc
3.00
0
20
Temperature coefficient of Voc
60
80
100
120
Voltage [V]
+0.01 %/K
-0.30 %/K
-0.31 %/K
Typical characteristics
These thermal characteristics are typical data.
2.00
47 °C
0
40
Temperature
coefficient of Pmax
2.50
Current [A]
50
Model: SF165-S
Condition: AM 1.5 / 1,000 W/m2
NOCT
Power [ W ]
1.50
Power [ W ]
Current [A]
800 W/m2
I-V Characteristics by Temperature
Model: SF165-S
Condition: AM 1.5 / 1,000 W/m2
1.50
3.00
75 °C
1.00
50 °C
2.50
25 °C
0.50
0 °C
Current [A]
2.00
0.00
1.50
0
20
40
75 °C
60
80
100
140
Voltage [V]
50 °C
1.00
120
Typical characteristics
25 °C
0 °C
0.50
0.00
0
20
40
60
80
100
120
140
Voltage [V]
Typical characteristics
Characteristics for System Design
Maximum system voltage
Vsys
1,000 V DC (UL 600 V DC)
Limiting reverse current
Ir
7A
Maximum series fuse rating
Isf
4A
Mechanical Characteristics
Dimensions (L x W x H)*3
1,257 x 977 x 35 mm (49.5 x 38.5 x 1.4 inch)
Weight
20 kg (44.1 lbs)
Module operating temperature
-40 °C to 85 °C
Application class on IEC61730
Class A
Fire safety class on IEC61730
Class C
Safety class on IEC61140
II
Snow load (to the front of the module)*4
2,400 Pa (IEC61646) / 1,600 Pa design load (UL1703)
Wind load (to the back of the module)
2,400 Pa (IEC61646) / 1,600 Pa design load (UL1703)
Cell type
CIS substrate glass (cadmium free)
Front cover
Clear tempered glass, 3.2 mm
Encapsulant
EVA
Back sheet
Weatherproof plastic film (color: black & silver)
Frame
Anodized aluminum alloy (color: black)
Edge sealant
Butyl rubber
Junction box
Protection rating: IP67 (with bypass diode)
Adhesive
Silicone
Output cables (Conductor)
2.5 mm2 / AWG14 (halogen free)
Cable lengths (symmetrical)
1,200 mm (47.2 inch)
Connectors
MC4 compatible
Qualifications and Compliance
IEC 61646 / IEC 61730 / UL 1703 / MCS 005-2.3
CE-Mark declaration
Solar Frontier is certified as: ISO 9001 / ISO 14001 / OHSAS 18001
RoHS compliant
*3: Dimensional tolerances are stated in the drawing section of this product data sheet.
*4: UL - 1.5 times design load is applied to the module. Accordingly, 2,400 Pa (50.1 lbs /ft2) is loaded to test the 1,600 Pa (33.4 lbs /ft2) UL design load.
Module drawing
1,257±2
12
13.5
568.5±5
12
2 x ø 4.5
150Item
1,200±100
2 x ø 4.5
Cell
465±5 glass
Cover
Encapsulant
Back sheet
±100
Frame
1,200
sealant
4.5
2 x ø Edge
Junction box
Cable
Adhesive
Label
Screw
Bar code label
30
30
21.5
21.5
33.5465±5
86.6
13.5
35
1,200±100
31±1
934±2
86.6
65
225
30
35
21.5
13.7
35
35
21.5
30
934±2
65
598.5±5
31±1
30
QT‘Y
Description
1
1
CIS (Substrate glass)
Clear tempered glass
EVA
Weatherproof plastic film (color: black & silver)
Anodized aluminium alloy (color: black)
Butyl rubber
With bypass diode
2.5 mm2 / AWG14 (with waterproof and locking connector)
Silicone
Product label
Stainless tapping (SUS304J3)
Serial number
1 Set
1
1
8
1
Europe
Italy
Asia (HQ)
Middle East
Americas
Solar Frontier Europe GmbH
Bavariafilmplatz 8
82031 Grünwald bei München
Germany
Solar Frontier Europe GmbH
Sede Secondaria per l’Italia
Via Domenico Cotugno 49/A scala B
70124 Bari
Italy
Solar Frontier K.K.
Daiba Frontier Building
2-3-2 Daiba, Minato-ku
Tokio 135-8074
Japan Solar Frontier Americas Inc.
3945 Freedom Circle
Santa Clara, CA 95054 USA
Tel: +49 89 92 86 142 0
Tel. +39 080 89 66 984
Tel: +81 3 5531 5626
Solar Frontier K.K.
Technical & Scientific Office
Eastern Cement Tower, #306
King Fahd Road
Al Khobar
Kingdom of Saudi Arabia Tel: +966 3882 0260
Tel: +1 408 916 4150
www.solar-frontier.com
www.solar-frontier.eu
Copyright for all material appearing on this Product Data Sheet belongs to Solar Frontier. Solar Frontier reserves the right, at its sole discretion, to change, modify, add, or
delete portions of the content at any time without notice, but makes no commitment to update any content which may be out of date. The data contained in this Product
Data Sheet indicates nominal data of our products as of the shipment of the products. Any warranty with respect to the quality or performance of our products will be provided only based on a limited warranty certificate separately issued by Solar Frontier. See the Installation and Maintenance Guide or contact the Technical Service for further
information on approved installation and use of this product.
© Solar Frontier Europe GmbH
DSSF1-38-PEE42
86.6
1
2
3
4
5
6
7
8
9
10
11
12
13.7
4 x ø 6.6
Mounting holes
13.5
21.5
65
598.5±5
(50)
No.
4 x ø 6.6
Mounting holes
225
30
12
33.5
454.5
372.5
(50)
150
2 x Grounding
31±1
2 x Grounding
934±2
4 x ø 8.5
Mounting holes
33.5
566±5
598.5±5
(548.5)
(28.2)
120
2xø4
465±5
4 x ø 8.5
Mounting holes
4 x ø 6.6
Mounting holes
454.5
13.7
372.5
21.5
35±0.5
225
120
DAB12-0054-03
454.5
372.5
150
2xø4
225
2 x Grounding
4 x ø 8.5
Mounting holes
454.5
372.5
225
(548.5)
431.5±5
440±5
2xø4
440±5
31±1
454.5
372.5
(28.2)
454.5
372.5
31±1
225
431.5±5
35
440±5
35
35
±0.5
431.5±5
568.5±5
566±5
1,257±2
(28.2)
90
977±2
566±5
(444)
568.5±5
977±2
20
90
(7)
1,257±2
20
(444)
(7)