BALDER
MAXIMUM FLEXIBILITY
NEW
FREE-FALL
WINDLASS
Leaded rope
12/14/16 mm
Remote Controls
BALDER
MAXIMUM FLEXIBILITY
NEW
MOTOR POWER 600/900/1200 Watt
FREE-FALL
WINDLASS
Automatic
Free-Fall System
The Automatic Free-Fall System applied
to the Balder windlass allows free running of
rope through the gypsy when lowering the
anchor; simply by depressing the down control
button the windlass will release its clutch and
the gypsy will freewheel. To stop the Free-Fall
depress the up control button on the windlass;
the clutch will engage stopping the gypsy and
allowing retrieval of the rope. The Free-Fall
function can be bypassed to facilitate power
controlled release.
Accessories
NEW
Mounting kit
Thru-hull with automatic device
The Automatic Stop kit allows you to automatically stop the anchor on its way up
leaving it in its stowed position. The Automatic Stop is a simple system composed
of a thru-hull fitting equipped with a sensor and a composite shell, that is easily fixed
to the leaded rope, equipped with magnets.
The rope will run freely until the magnets don’t get in contact with the sensor which
again will automatically stop the motor by interrupting the electrical circuit.
AISI 316 Stainless steel
Gypsy for rope
12/14/16 mm
The Quick Balder Free Fall
windlass is designed for
inside/stern installations but may
easily be adapted to other type
of Installations due to its flexible
mounting options.
AISI 316 Stainless steel
thru-hull and rope guide bracket
The rope-only gypsy has been specifically
developed for use of rope at maximum output.
The special ribbing allows optimal grip.
Anodized
aluminium
Quick gearbox
Chromed bronze
gypsy and gypsy cover
The mounting bracket allows the user to install
the windlass in a variety of combinations.
AISI 316 Stainless steel
rope guide
The motorgearbox
can be rotated
and fixed in several
positions every 45°.
IP67 Watertight Motor
MODEL
MOTOR POWER
Motor supply voltage
BALDER 900
BALDER 1200
600 W
900 W
1200 W
12 V
Maximum rope speed
24 V
15,4 m/min (50.5 ft/min)
Protection circuit breaker
Weight
BALDER 600
60 A
12 V
24 V
25,8 m/min (84.6 ft/min)
40 A
50 A
9 Kg (19.8 lb)
40 A
19 kg (41.9 lb)
12 V
24 V
31,2 m/min (102.3 ft/min)
80 A
50 A
19,20 kg (42.3 lb)
Accessories
IP67 Watertight hand held
Remote Control
Leaded rope
Radio remote control
with hand held transmitter
and pocket transmitter
Remote Controls
12, 14, and 16 mm
REV01A_GB
Printed February 2012
Balder series
Dimensions in mm (inch)
44 (1 3/4)
Ø 128 (5 3/64)
Ø 106 (4 11/64)
BALDER 600 Watt
THE COMPANY RESERVES THE RIGHT TO MODIFY THE CHARACTERISTICS OF THE ARTICLES IN THIS DEPLIANT WITHOUT NOTICE.
Progetto grafico e fotografia a cura del dipartimento pubblicità e comunicazione Quick S.p.A. - Stampa Tipografia Moderna / Ravenna
119 (4 11/16)
111 (4 3/8)
244 (9 5/8)
®
44 (1 3/4)
Ø 128 (5 3/64)
Ø 106 (4 11/64)
BALDER 900 Watt
141 (5 9/16)
111 (4 3/8)
330 (13)
44 (1 3/4)
Ø 128 (5 3/64)
Ø 106 (4 11/64)
BALDER 1200 Watt
141 (5 9/16)
111 (4 3/8)
340 (13 3/8)
)
/64
45
(1
49
102 (4 1/64)
Ø 150 (5 29/32)
Ø 130 (5 1/8)
Automatic Stop
42 (1 21/32)
Thru-hull
Mounting bracket
8 (5/16)
153 (6 1/32)
48 (1 57/64)
33,5 (1 5/16)
QUICK® S.p.A. - Via Piangipane 120/A - 48124 Piangipane (RAVENNA) - ITALY - Tel. +39.0544.415061 - Fax +39.0544.415047
www.quickitaly.com - quick@quickitaly.com
CDCPBLDCER01
140 (5 33/64)