Data analysis Lesson: Lab 2
Protein Quantification
Once you have your raw numbers back, what do you do?
First, identify what cells are your samples and move that information into your own
spreadsheet. *Your data may not yet be in a spreadsheet - you must create a
spreadsheet and transfer your data carefully.
Label what data is what. Your lab report will ask you for annotated raw data.
Example:
1
2
3
4
Red: BSA serial dilutions (2.8-0 mg/ml) B
0.555
0.543
0.424
0.444
0.45
0.466
0.569
0.59
C
0.385
0.39
0.304
0.304
D
0.333
0.333
0.703
0.727
E
0.286
0.29
0.044
0.044
F
0.254
0.255
0.956
0.916
G
0.228
0.226
0.857
0.879
H
0.199
0.202
0.044
0.049
A
Blue: 1:50 milk dilutions
*You’ll also have unknowns
Next, create a standard curve for your serial dilution
●
●
Create an “average” column for your BSA serial dilution absorbance.
Create an “Average - Blank column”: Use the absorbance for 0 mg/ml to
“zero” your absorbance values.
○
○
○
●
●
I use “=(cell with average BSA absorbance-cell with zero BSA absorbance)” as my
formula
For example: =D4-D8
If you click and drag this cell down, it will no longer subtract the “zero” value unless you
use a $ symbol
■
“=D4-D8” would become “=D5-D9”
■
But “=D4-D$8” will become “=D5-D$8” as you drag the formula down
■
*Dragging a formula down a column is a quick way to copy your work in a
spreadsheet
Create a column of BSA protein concentrations that match up with the
absorbance values in the average-blank column
**Note my example includes a 2.8mg/ml…yours will not!
BSA
concentration
(mg/ml)
ABS
2.8
0.3485
1.4
0.2575
0.7
0.187
0.35
0.1325
0.175
0.0875
0.0875
0.054
0.04375
0.0265
0
0
Use your data to complete your standard curve
Graph your points and visualize a
trendline for linear regression.
(Use “Insert -> chart”)
See how non-linear my points are?
This is why we don’t use 2.8
mg/ml.
Standard practice is to create a
spread of BSA measurements that
are between 0 and 1 mg/mL.
Here is a slightly more linear example with a better fit
If I had a 1:20 diluted milk with an
absorbance of 0.0195, what is the
protein concentration of that milk?
Can you convert to g/cup?
Can you make your spreadsheet do
these calculations for you?
Remember, the first step is to average
your two milk trials and subtract the
zero absorbance value.
Now try with your own data!
Your mission (homework or classwork)
●
Prepare the following columns:
○
○
○
○
○
●
BSA Average
BSA Avg-Blank (remember, your 7th tube--tube G should be your zero…my example was tube
H because I prepared 8 BSA samples.)
Milk Average
Milk Average-Blank
Also good to add a column identifying which milk is which
Try to create a scatterplot of BSA (mg/ml) vs Absorbance
○
○
Add a trendline with formula
Add R2 value
Bring back to zero