Chapter 9: Phase Diagrams ISSUES TO ADDRESS... • When we combine two elements... what equilibrium state do we get? • In particular, if we specify... --a composition (e.g., wt% Cu - wt% Ni), and --a temperature (T ) then... How many phases do we get? What is the composition of each phase? How much of each phase do we get? Phase B Phase A Nickel atom Copper atom Chapter 9 - 1 Equilibrium “Stable” configuration of a system Sufficient amount of time has elapsed No further changes occur. Equilibrium phase diagrams, The nature of a system at any given temperature after a “sufficiently” long period of time. Chapter 9 - 2 Phase Equilibria: Solubility Limit Introduction – Solutions – solid solutions, single phase – Mixtures – more than one phase Sucrose/Water Phase Diagram • Solubility Limit: L (liquid) 60 L 40 (liquid solution i.e., syrup) 20 0 + S (solid sugar) 20 40 60 65 80 100 Co =Composition (wt% sugar) Pure Sugar Answer: 65 wt% sugar. If Co < 65 wt% sugar: syrup If Co > 65 wt% sugar: syrup + sugar. Solubility Limit 80 Pure Water Question: What is the solubility limit at 20°C? Temperature (°C) Max concentration for which only a single phase solution occurs. 100 Chapter 9 - 3 Adapted from Fig. 9.1, Callister & Rethwisch 8e Components and Phases • Components: The elements or compounds which are present in the mixture (e.g., Al and Cu) • Phases: The physically and chemically distinct material regions that result (e.g., a and b). AluminumCopper Alloy b (lighter phase) a (darker phase) Chapter 9 - 4 Adapted from chapter-opening photograph, Chapter 9, Callister 3e. Effect of T & Composition (Co) • Changing T can change # of phases: path A to B. • Changing Co can change # of phases: path B to D. B (100°C) D (100°C) 1 phase watersugar system Temperature (°C) 100 2 phases L 80 (liquid) 60 L + S i.e., syrup) (solid sugar) (liquid solution 40 A (20°C) 20 2 phases 0 0 20 40 60 70 80 100 Co =Composition (wt% sugar) Chapter 9 - 5 Adapted from Fig. 9.1, Callister & Rethwisch 8e. Binary Phase Diagram Simple solution system (e.g., Ni-Cu solution) Crystal Structure electroneg r (nm) Ni FCC 1.9 0.1246 Cu FCC 1.8 0.1278 • Both have the same crystal structure (FCC) and have similar electronegativities and atomic radii (W. Hume – Rothery rules) suggesting high mutual solubility. • Ni and Cu are totally soluble in all proportions. 6 Phase Diagrams • Indicate phases as function of T, Co, and P. • For this course: -binary systems: just 2 components. -independent variables: T and Co (P = 1 atm is almost always used). T(°C) • Phase Diagram for Cu-Ni system • 2 phases: 1600 1500 L (liquid) a (FCC solid solution) L (liquid) 1400 1300 a (FCC solid solution) 1200 1100 Adapted from Fig. 9.3(a), Callister & Rethwisch 8e (Fig. 9.3(a) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH (1991). 1000 0 Cu 20 40 60 wt% Ni 80 • 3 phase fields: L L+a a 100 Chapter 9 - 7 Isomorphous Binary Phase Diagram • Phase diagram: Cu-Ni system. • System is: -- binary i.e., 2 components: Cu and Ni. -- isomorphous i.e., complete solubility of one component in another; a phase field extends from 0 to 100 wt% Ni. T(ºC) 1600 1500 L (liquid) 1400 1300 a (FCC solid solution) 1200 1100 1000 0 Cu Adapted from Fig. 9.3(a), Callister & Rethwisch 8e. (Fig. 9.3(a) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH (1991). Cu-Ni phase diagram 20 40 60 80 100 wt% Ni Chapter 9 - 8 Phase Diagrams: # and types of phases • Rule 1: If we know T and Co, then we know: --the # and types of phases present. A(1100°C, 60): 1 phase: a B(1250°C, 35): 2 phases: L + a 1600 L (liquid) B (1250°C,35) • Examples: T(°C) 1500 1400 1300 1200 1100 1000 Adapted from Fig. 9.3(a), Callister & Rethwisch 8e (Fig. 9.3(a) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH, 1991). Cu-Ni phase diagram a (FCC solid solution) A(1100°C,60) 0 20 40 60 80 100 wt% Ni Chapter 9 - 9 Phase Diagrams: composition of phases • Rule 2: If we know T and Co, then we know: --the composition of each phase. • Examples: Cu-Ni system T(°C) Co = 35 wt% Ni At T A = 1320°C: Only Liquid (L) CL = Co ( = 35 wt% Ni) At T D = 1190°C: Only Solid ( a) Ca = Co ( = 35 wt% Ni) A TA 1300 L (liquid) B TB 1200 D TD 20 tie line a (solid) 30 50 35 40 32 Co 43 wt% Ni Ca CL At T B = 1250°C: Both a and L CL = C liquidus ( = 32 wt% Ni here) Ca = C solidus ( = 43 wt% Ni here) Adapted from Fig. 9.3(b), Callister & Rethwisch 8e (Fig. 9.3(b) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH,1991.) Chapter 9 - 10 T(°C) Practice 1600 L (liquid) 1500 1400 1300 a 1200 (FCC solid solution) Cu-Ni phase diagram 1100 1000 0 20 40 60 80 Adapted from Fig. 9.3(a), Callister & Rethwisch 8e (Fig. 9.3(a) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH, 1991). 100 wt% Ni Chapter 9 - 11 T(°C) Practice 1600 L (liquid) 1500 1400 1300 a 1200 (FCC solid solution) Cu-Ni phase diagram 1100 1000 0 20 40 60 80 Adapted from Fig. 9.3(a), Callister & Rethwisch 8e (Fig. 9.3(a) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH, 1991). 100 wt% Ni Chapter 9 - 12 Phase Diagrams: weight fractions of phases • Rule 3: If we know T and Co, then we know: --the amount of each phase (given in wt%). • Examples: Co = 35 wt% Ni Cu-Ni system T(°C) A TA 1300 tie ine L (liquid) At T A : Only Liquid (L) W L = 100 wt%, W a = 0 1200 D TD At T D: Only Solid ( a) W L = 0, Wa = 100 wt% 20 Adapted from Fig. 9.3(b), Callister & Rethwisch 8e (Fig. 9.3(b) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH, 1991.) 30 35 40 Co a (solid) 50 wt% Ni Chapter 9 - 13 Phase Diagrams: weight fractions of phases • Rule 3: If we know T and Co, then we know: --the amount of each phase (given in wt%). • Examples: Co = 35 wt% Ni At T B : Both a and L 43 35 S 73 wt % WL 43 32 R +S Cu-Ni system T(°C) tie line 1300 L (liquid) B R S TB 1200 Wa R = 27 wt% R +S 20 Adapted from Fig. 9.3(b), Callister & Rethwisch 8e (Fig. 9.3(b) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH, 1991.) a (solid) 30 50 35 40 32 Co 43 wt% Ni Ca CL Chapter 9 - 14 The Lever Rule • Tie line – connects the phases in equilibrium with each other - essentially an isotherm T(°C) How much of each phase? tie line 1300 L (liquid) B TB a (solid) 1200 R 20 S 30C C 40 C a L o 50 wt% Ni WL C C0 ML S a M L M a R S C a CL Wa C CL R 0 R S C a CL 15 Adapted from Fig. 9.3(b), Callister & Rethwisch 8e Practice • For a solution that is 30 wt% Ni and is at 1210 °C, determine the fractions of solid and liquid phase material. T(°C) L (liquid) 1300 B a 1210 1200 (solid) 20 30 40 50 wt% Ni Cu-Ni phase diagram Adapted from Fig. 9.3(a), Callister & Rethwisch 8e (Fig. 9.3(a) is adapted from Phase Diagrams of Binary Nickel Alloys, P. Nash (Ed.), ASM International, Materials Park, OH, 1991). Chapter 9 - 16 Ex: Cooling in a Cu-Ni Binary • Phase diagram: Cu-Ni system. • System is: --binary i.e., 2 components: Cu and Ni. T(°C) L (liquid) 1300 L: 34.9 wt% Ni a: 46 wt% Ni i.e., complete solubility of one component in another; a phase field extends from 0 to 100 wt% Ni. • Consider Co = 35 wt%Ni. Cu-Ni system A 34.9 32 --isomorphous L: 35wt%Ni B C 46 43 D 24 L: 32 wt% Ni 36 120 0 a: 43 wt% Ni E L: 24 wt% Ni a: 36 wt% Ni a (solid) 110 0 20 30 a 35 wt% Ni 35 Co 40 50 wt% Ni Chapter 9 - 17 Adapted from Fig. 9.4, Callister & Rethwisch 8e Mechanical Properties: Cu-Ni System • Effect of solid solution strengthening on: --Ductility (%EL,%AR) 400 TS for pure Ni 300 TS for pure Cu 200 0 20 40 Cu 60 80 100 Ni Composition, wt% Ni --Peak as a function of Co Elongation (%EL) Tensile Strength (MPa) --Tensile strength (TS) 60 %EL for pure Cu %EL for pure Ni 50 40 30 20 0 20 Cu 40 60 80 100 Ni Composition, wt% Ni --Min. as a function of Co 18 Adapted from Fig. 9.6(a), Callister & Rethwisch 8e. Adapted from Fig. 9.6(b Callister & Rethwisch 8e. Binary-Eutectic Systems Liquid solid (1) + solid (2) 2 components Ex.: Cu-Ag system 3 single phase regions (L, a, b) Limited solubility: a: mostly Cu b: mostly Ag TE : No liquid below TE CE : Composition @ TE T(°C) 1200 L (liquid) 1000 TE 800 a L(71.9 wt% Ag) heating L+a L+b b 779°C 8.0 71.9 91.2 600 ab 400 200 Eutectic transition 0 L(CE) a(CaE) + b(CbE) cooling Cu-Ag system 20 40 60 CE 80 100 Co , wt% Ag a(8.0 wt% Ag) b(91.2 wt% Ag) Chapter 9 - 19 Adapted from Fig. 9.7, Callister & Rethwisch 8e Practice (a) Using this diagram, briefly explain how spreading salt on ice that is at a temperature below 0 C (32 F) can cause the ice to melt? (b) At what temperature is salt no longer useful in causing ice to melt? Chapter 9 - 20 Practice: Pb-Sn Eutectic System (1) For a 40 wt% Sn-60 wt% Pb alloy at 150°C, find... --the phases present: a+b --compositions of phases: CO = 40 wt% Sn Ca = 11 wt% Sn Cb = 99 wt% Sn Pb-Sn system T(°C) 300 L (liquid) --the relative amount of each phase: a 200 Cb - C O S = Wa = R+S Cb - C a 150 100 99 - 40 59 = = = 67 wt% 99 - 11 88 C - Ca Wb = R = O Cb - Ca R+S 40 - 11 29 = = 33 wt% = 99 - 11 88 L+ a L+b b 183°C 18.3 61.9 R S 97.8 a+b 0 11 20 Ca 40 Co 60 80 C, wt% Sn 99100 Cb Chapter 9 - 21 Adapted from Fig. 9.8 Callister & Rethwisch 8e Practice: Pb-Sn Eutectic System (2) • For a 40 wt% Sn-60 wt% Pb alloy at 220°C, find... --the phases present: a + L --compositions of phases: CO = 40 wt% Sn Ca = 17 wt% Sn CL = 46 wt% Sn --the relative amount of each phase: Pb-Sn system T(°C) 300 220 200 a L+ a R L (liquid) L+b b S 183°C CL - CO 46 - 40 = Wa = 100 CL - Ca 46 - 17 6 = = 21 wt% 29 0 CO - Ca 23 = WL = = 79 wt% CL - Ca 29 a+b 17 20 Ca 40 46 60 Co CL 80 C, wt% Sn Chapter 9 - 22 Adapted from Fig. 9.8, Callister & Rethwisch 8e 100 Microstructures in Eutectic Systems: I T(°C) L: Co wt% Sn 400 • Co < 2 wt% Sn • Result: --at extreme ends --polycrystal of a grains i.e., only one solid phase. L a L 300 a 200 L+ a (Pb-Sn System) a: Co wt% Sn TE a+ b 100 0 Co 10 20 30 Co, wt% Sn 2 (room T solubility limit) Chapter 9 - 23 Adapted from Fig. 9.11, Callister & Rethwisch 8e Microstructures in Eutectic Systems: II L: Co wt% Sn T(°C) • 2 wt% Sn < Co < 18.3 wt% Sn • Result: 400 Initially liquid liquid + a then a alone finally two phases a polycrystal fine b-phase inclusions 300 L L+a a 200 TE L a a: Co wt% Sn a b 100 a+ b 0 10 20 Pb-Sn system 30 Co Co , wt% Sn 2 (sol. limit at T room ) 18.3 (sol. limit at TE) Chapter 9 - 24 Adapted from Fig. 9.12, Callister & Rethwisch 8e Microstructures in Eutectic Systems: III • Co = CE • Result: Eutectic microstructure (lamellar structure) --alternating layers (lamellae) of a and b crystals. T(°C) L: Co wt% Sn 300 Pb-Sn system a 200 L+ a L Lb b 183°C TE 100 ab 0 20 18.3 40 Micrograph of Pb-Sn eutectic microstructure b: 97.8 wt% Sn a: 18.3 wt%Sn 60 CE 61.9 80 160 m 100 97.8 C, wt% Sn Chapter 9 - 25 Adapted from Fig. 9.13, Callister & Rethwisch 8e Adapted from Fig. 9.14, Callister & Rethwisch 8e Lamellar Eutectic Structure 26 Adapted from Figs. 9.14 & 9.15, Callister & Rethwisch 8e Microstructures in Eutectic Systems: IV • 18.3 wt% Sn < Co < 61.9 wt% Sn • Result: a crystals and a eutectic microstructure L: Co wt% Sn T(°C) 300 L a L Pb-Sn system a 200 a L L+a R TE R 100 a+b L+b b S S 20 18.3 40 60 61.9 80 Co, wt% Sn Adapted from Fig. 9.16, Callister & Rethwisch 8e Ca = 18.3 wt% Sn CL = 61.9 wt% Sn Wa = S = 50 wt% R+S WL = (1- Wa) = 50 wt% • Just below TE : primary a eutectic a eutectic b 0 • Just above TE : 100 97.8 Ca = 18.3 wt% Sn Cb = 97.8 wt% Sn Wa = S = 73 wt% R+S Wb = 27 wt% Chapter 9 - 27 Hypoeutectic & Hypereutectic 300 L T(°C) Adapted from Fig. 9.8, Callister 7e. (Fig. 9.8 adapted from Binary Phase Diagrams, 2nd ed., Vol. 3, T.B. Massalski (Editor-in-Chief), ASM International, Materials Park, OH, 1990.) a 200 L+ a L+b b TE a+b (Pb-Sn System) 100 0 20 40 hypoeutectic: Co = 50 wt% Sn (Figs. 9.14 and 9.17 from Metals Handbook, 9th ed., Vol. 9, Metallography and Microstructures, American Society for Metals, Materials Park, OH, 1985.) a a a 60 80 eutectic 61.9 Co, wt% Sn hypereutectic: (illustration only) eutectic: Co = 61.9 wt% Sn b a a b a 175 m 100 b b b b 160 m eutectic micro-constituent Chapter 9 - 28 Adapted from Callister & Rethwisch 8e Practice: Describe the microstructure in each region T(°C) 300 L + a L (liquid) a 200 L + b b 183°C 100 a + b 0 20 60 C, wt% Sn 80 100 Chapter 9 - 29 Intermetallic Compounds Mg2Pb Note: intermetallic compound forms a line - not an area because stoichiometry (i.e. composition) is exact. 30 Adapted from Fig. 9.20, Callister & Rethwisch 8e. Eutectoid & Peritectic • Eutectic - liquid in equilibrium with two solids L cool a + b heat • Eutectoid - solid phase in equation with two solid phases intermetallic compound S2 S1+S3 - cementite cool a + Fe3C (727ºC) heat • Peritectic - liquid + solid 1 solid 2 (Fig 9.21) S1 + L S2 cool + L heat (1493ºC) 31 Eutectoid & Peritectic Cu-Zn Phase diagram Eutectoid transition Peritectic transition + L + 32 Adapted from Fig. 9.21, Callister & Rethwisch 8e. Iron-Carbon (Fe-C) Phase Diagram -Eutectoid (B): a + Fe3C 1600 L 1400 +L 1200 (austenite) 1000 a 800 600 120 m Result: Pearlite = alternating layers of a and Fe3C phases (Adapted from Fig. 9.27 Callister & Rethwisch 8e L+Fe3C R S +Fe3C 727°C = Teutectoid B R S 400 0 1 0.76 (Fe) A 1148°C 2 3 a+Fe3C 4 5 6 Fe3C (cementite) L + Fe3C T(°C) C eutectoid • 2 important points -Eutectic (A): 6.7 4.30 Co, wt% C Fe3C (cementite-hard) a (ferrite-soft) Adapted from Fig. 9.24, Callister & Rethwisch 8e 33 Hypoeutectoid Steel T(°C) 1600 L a a a +L 1200 (austenite) 1000 + Fe3C 800 r s 727°C aRS w a =s/(r +s) 600 w =(1- wa ) C0 400 0 a (Fe) pearlite w pearlite = w L+Fe3C 1148°C a + Fe3C 1 2 3 4 5 6.7 100 m w a =S/(R+S) w Fe3 =(1-w a ) C 6 (Fe-C System) Adapted from Figs. 9.24 and 9.29, Callister & Rethwisch 8e (Fig. 9.24 adapted from Binary Alloy Phase Diagrams, 2nd ed., Vol. 1, T.B. Massalski (Ed.-in-Chief), ASM International, Materials Park, OH, 1990.) Co , wt% C 0.76 Fe3C (cementite) 1400 pearlite Hypoeutectoid steel proeutectoid ferrite Adapted from Fig. 9.30, Callister & Rethwisch 8e. 34 Hypereutectoid Steel T(°C) 1600 L +L 1200 (austenite) 800 w Fe3C =r/(r +s) w =(1-w Fe3C ) +Fe3C r a R 600 400 0 (Fe) pearlite L+Fe3C 1148°C 1000 0.76 Fe3C (Fe-C System) s S 1 Co a +Fe3C 2 3 4 5 6 Adapted from Figs. 9.24 and 9.32, Callister & Rethwisch 8e (Fig. 9.24 adapted from Binary Alloy Phase Diagrams, 2nd ed., Vol. 1, T.B. Massalski (Ed.-in-Chief), ASM International, Materials Park, OH, 1990.) 6.7 Co , wt%C w pearlite = w w a =S/(R+S) w Fe3C =(1-w a ) Fe3C (cementite) 1400 60 mHypereutectoid steel pearlite proeutectoid Fe3C 35 Adapted from Fig. 9.33, Callister & Rethwisch 8e. Practice: Phase Equilibria For a 99.6 wt% Fe-0.40 wt% C at a temperature just below the eutectoid, determine the following a) composition of Fe3C and ferrite (a) b) the amount of carbide (cementite) in grams that forms per 100 g of steel c) the amount of pearlite and proeutectoid ferrite (a) 36 Practice: Phase Equilibria Solution: a) composition of Fe3C and ferrite (a) CO = 0.40 wt% C Ca = 0.022 wt% C CFe C = 6.70 wt% C b) the amount of carbide (cementite) in grams that forms per 100 g of steel 3 1600 L Fe3C 5.7 g a 94.3 g L+Fe3C 1148°C 1000 Fe3C (cementite) Fe3C Co Ca x100 1400 Fe3C a CFe3C Ca T(°C) +L 1200 0.4 0.022 x 100 5.7g (austenite) 6.7 0.022 + Fe3C 800 727°C R S a + Fe3C 600 400 0 Ca CO 1 2 3 4 Co , wt% C 5 6 6.7 CFe C 3 37 Practice: Phase Equilibria c. the amount of pearlite and proeutectoid ferrite (a) note: amount of pearlite = amount of just above TE 1600 L 1400 T(°C) C Ca o x 100 51.2 g a C Ca pearlite = 51.2 g proeutectoid a = 48.8 g 1200 +L 1000 + Fe3C 800 727°C RS a + Fe3C 600 400 0 L+Fe3C 1148°C (austenite) 1 Ca CO C 2 3 4 5 6 Co , wt% C 38 Fe3C (cementite) Co = 0.40 wt% C Ca = 0.022 wt% C Cpearlite = C = 0.76 wt% C 6.7 Summary • Phase diagrams are useful tools to determine: --the number and types of phases, --the wt% of each phase, --and the composition of each phase for a given T and composition of the system. • Alloying to produce a solid solution usually --increases the tensile strength (TS) --decreases the ductility. • Binary eutectics and binary eutectoids allow for a range of microstructures. Chapter 9 - 39
0
You can add this document to your study collection(s)
Sign in Available only to authorized usersYou can add this document to your saved list
Sign in Available only to authorized users(For complaints, use another form )