ALUMINUM AND ITS ALLOYS
• Modern car with components
made of aluminum can be
24% lighter than one with
components made of steel
• Which allows fuel
consumption to be
reduced by 2 liters per
hundred kilometers
In 1961 the Land Rover launched
mass production of Buick 215 with
an eight-cylinder V8 engine.
Cylinder blocks of this engine
were made of aluminium. With
a weight of only 144 kg the engine
was a real breakthrough.
The first engine with
aluminium parts was
made in 1901 by Carl
Benz
• Abundant element 8% of
the earth crust and
normally found in oxide
form Al2O3
• The famous ores of
aluminum are
• Bauxite
• Kaolinite
• Nepheline
• Alunite
The extraction of aluminum requires high electrical consumption.
These processes are suitable for the countries which have highly
cheap electricity
• Extraction of Aluminum
•
Question:
•
Q:What are the stages in extraction of aluminium?
•
Q:How is alumina extracted from bauxite?
•
Q:What are the 3 ores of aluminium?
•
Q:Why is cryolite used in the extraction of aluminium?
•
Q:What is the purpose of using carbon in the extraction of aluminium?
•
Q:Why does aluminium form at the cathode?
• Aluminum is produces by electrolytic reaction of its molten oxide
with cryolite (Na3AlF6) as an electrolyte
• Cryolite is added to lower the temperature to 950C Tm of
alumina = 2030C
• The electrolytic cell consists of
•
Molten cryolite-aluminium electrolyte
•
•
Total reaction
Carbon as anode
Liquid aluminum pool
• What are the types of solid
solutions?
SOLID
SOLUTION
• What are the Hume-Rothery rules
for solid solubility?
• What are the Hume-Rothery rules
used to determine?
Cu, Zn and Si are the most
commonly used
alloying element in
aluminum which have
sufficient solid solubility
Mg, Cr, Mn and Zr are
used primarily to
form compounds
which control grain
structure
According to Hume-Rothery Principal, the Al and Mg makes the (intermetallic)
alloy compound while Al and Cu makes the substitution solid solution
• What is age hardening?
• What are the three steps in age
hardening?
QUESTION
• What is the process of hardening
aluminum?
• What alloys can be age hardened?
• https://www.youtube.com/watch?v
=_jAdcz3VjBQ
HARDENING MECHANISM
PRECIPITATION HARDENING OF AL
ALLOYS
Alpha + Beta alloys are heated
upto the Alpha region to
dissolve all Beta
Just above the G-P Solvus line
Where the fine precipitates of
Beta formed
Temperature
G-P Solvus line
For age hardening
Holding fine Beta precipitates
At temperature just
above G-P solvus line
G-P Solvus line
Time
• Heat treatment usually involves the
three following stages:
• To dissolve the alloying
elements.
• Rapid cooling or quenching
usually to room temperature to
obtain supersaturated solid
solution (SSSS) of these elements
in aluminium.
• Controlled decomposition of the
SSSS to form a finely dispersed
precipitates, normally
accompanied with ageing at
appropriate temperatures.
• Decomposition of SSSS is complex
and normally involves several stages
• The formation of
• Guinier-Preston (GP) Zone
• Intermediate precipitates
• Equilibrium phase
Fig
(a)
Equilibriu
m
Very little hardening
effect
Contributes
hardening
G-P
Zone
Intermediate
precipitates