Sargent
2nd Period
May 1, 2025
Earthquake Shake Table CER
Claim:
Our building design was successful in resisting the simulated earthquake because it
remained stable during the vigorous shaking and was able to support the required weight without
collapsing or showing significant structural failure.
Evidence:
During testing, our structure withstood all the levels of simulated shaking. The square
base stayed flat on the platform, and the popsicle stick supports didn’t snap or bend under
pressure. Although the top of the building moved slightly during the strongest shaking level, it
didn’t tip or collapse. The hot glue joints held all the pieces together, and no parts fell off or
cracked. It also successfully held the additional weight placed on top during the test without any
sagging or weakening.
Reasoning:
Earthquakes cause the ground to shift using seismic waves, which push and pull
structures in different directions. The forces can destroy buildings, crack them, or cause them to
collapse if they are not designed to resist movement. Our building was square-based, which
helped to provide it with a stable foundation. Although triangles are generally stronger for
bracing, the square base held since our joints and supports were solid. This was thanks to careful
glueing and popsicle stick reinforcement.
The materials we used were extremely effective as well. Popsicle sticks are strong and
stiff, which helped keep the walls from falling over. The plastic straws were lighter and more
Sargent
2nd Period
May 1, 2025
Earthquake Shake Table CER
flexible, which allowed the top parts of the building to move slightly with the movement
of the simulation instead of breaking. The hot glue acted as flexible joints that absorbed some of
the movement without collapsing. This kind of flexibility is important in earthquake resistant
buildings, because it allows these buildings to bend instead of break. Overall, our design
sacrificed strength for flexibility, which allowed it to survive the simulation.