5 Keys to Making a Good Weld
Machine Set-Up
I am positive I have my electrode.
1. Connect the Electrode Holder to the Positive Terminal
a. Exceptions… Connect to the Negative Terminal with these processes
i. TIG
ii. FCAW-S (Flux Core Wire without shielding gas)
2. Setting Amps & Volts
a. For Stick Welding (SMAW)
i. Convert rod size from fraction to decimal and set amps at that
number.
b. For all Wire Feed Welding processes
(GMAW, FCAW, etc…)
i. Wire Feed Speed (WFS) determines
amperage
ii. Voltage Determines bead shape
Welding
3. SLOW DOWN!
a. Travel Speed
4. Flux is a drag man…
a. 10° – 15° drag angle for flux covered electrodes
b. Rod or Gun Angle
5. Push the rod in!
a. Arc Length or Contact Tip to Work Distance (CTWD)