4. Thermodynamics
Thermodynamics is concerned with the transformation of energy
Energy transformations – mostly involve heat and work movements.
The starting point for thermodynamic considerations are the
laws of thermodynamics:
Zeroth law
Thermodynamic equilibrium is an equivalence relation
First law
conservation of energy
Second law
Third law
why do some things happen naturally, some not ?
absolute zero temperature
Introduction
A process must satisfy the first law in order to occur.
Satisfying the first law alone does not ensure that the process will
take place.
Second law is useful:
provide means for predicting the direction of processes,
establishing conditions for equilibrium,
determining the best theoretical performance of cycles,
engines and other devices.
Important terms
Examples: Closed System
Examples: Open System
Isolated system
Isolated system – neither
mass nor energy can cross
the selected boundary
Example (approximate): coffee in a
closed, well-insulated thermos
bottle
Properties of a system
Properties of a system is a measurable characteristic of a system that is in
equilibrium.
Properties may be intensive or extensive.
Intensive – Are independent of the amount of mass: Temperature,
Pressure, and Density.
Extensive – varies directly with the mass: mass, volume, energy,
enthalpy
State, Equilibrium and Process
State – a set of properties that describes the conditions of a
system. Eg. Mass m, Temperature T, volume V
Thermodynamic equilibrium system that maintains thermal,
mechanical, phase and chemical
equilibriums.
State, Equilibrium and Process
The prefix iso- is often used to designate a process for which a
particular property remains constant.
Isobaric process: A process during which the pressure P remains
constant.
Pressure is Constant (ΔP = 0)
State, Equilibrium and Process
Isochoric (or isometric) process: A process during which the specific volume v
remains constant
Isothermal process: A process during which the
temperature T remains constant.
.
Process
Property held
constant
isobaric
pressure
isothermal
temperature
isochoric
volume
isentropic
entropy
Types of Thermodynamics Processes
Cyclic process - when a system in a given initial
state goes through various processes and finally
return to its initial state, the system has undergone a
cyclic process or cycle.
Reversible process - it is defined as a process that,
once having take place it can be reversed. In doing
so, it leaves no change in the system or boundary.
Irreversible process - a process that cannot return
both the system and surrounding to their original
conditions
Types of Thermodynamics Processes
Adiabatic process - a process that has no heat transfer into or
out of the system. It can be considered to be perfectly
insulated.
Isentropic process - a process where the entropy of the fluid
remains constant.
Polytropic process - when a gas undergoes a reversible
process in which there is heat transfer, it is represented with a
straight line, PVn = constant.
Throttling process - a process in which there is no change in
enthalpy, no work is done and the process is adiabatic.
What is Pure Substances?
A substance that has a fixed
chemical composition throughout
is called a pure substance.
A pure substance does not have to
be of a single chemical element
or compound, however. A
mixture of various chemical
elements or compounds also
qualifies as a pure substance as
long as the mixture is
homogeneous.
What is Pure Substances?
A mixture of liquid and water vapor is a pure substance, but a
mixture of liquid and gaseous air is not.
Examples:
Water (solid, liquid, and vapor phases)
Mixture of liquid water and water vapor
Carbon dioxide, CO2
Nitrogen, N2
Mixtures of gases, such as air, as long as there is no
change of phase.
Phases of A Pure Substance
The substances exist in different phases, e.g. at room
temperature and pressure, copper is solid and mercury is a
liquid.
It can exist in different phases under variations of condition.
There are 3 Principal phases
• solid
• Liquid
• gas
Each with different molecular structures.
Phase-change Processes of Pure Substances
There are many practical situations where two phases of a pure substances
coexist in equilibrium.
E.g. water exists as a mixture of liquid and vapor in the boiler and etc.
Solid: strong intermolecular bond
Liquid: intermediate intermolecular bonds
Gas: weak intermolecular bond
Solid
Liquid
Gas
Zeroth Law of Thermodynamics
“ If two bodies are in thermal equilibrium with a third body,
there are also in thermal equilibrium with each other.”
Thermal equilibrium is a situation in
which two objects would not exchange
energy by heat or electromagnetic
radiation if they were placed in thermal
contact
State Functions
A state function depends only on the current state of a system
The change in a state function between two states is independent
of the path between them
Internal energy is a state function; work and heat are not
The First Law
Fundamental properties: Work and Energy
Work is the transfer of energy to a system by a process
that is equivalent to raising or lowering a weight:
N.L.S. Carnot
W = force X distance
Total capacity to do work
Internal Energy
The internal energy of a system may be changed by
doing work
P.P. Joule
ΔU =W
The First Law
Heat is energy transferred as a result of temperature difference.
Energy flows as heat from a high temperature region to a low
temperature region.
Adiabatic systems do not allow heat to pass the system
boundary doing work by heat but diathermic systems do allow.
Example for adiabatic system: Dewar
If the internal energy is changed
only by heating:
ΔU= Q
The First Law
The First Law of Thermodynamics:
The internal energy of an isolated system is constant.
Definition:
Going out of the System: < 0
Going into the System: > 0
First Law
The First Law is usually referred to as the Law of
Conservation of Energy, i.e. energy can neither be created
nor destroyed, but rather transformed from one state to
another.
The energy balance is maintained within the system being
studied/defined boundary.
The various energies associated are then being observed as
they cross the boundaries of the system.
Energy Balance for Closed System
V
Closed
System
Heat
Work
z
Reference Plane, z = 0
or
Ein Eout E system
According to classical thermodynamics
Qnet Wnet E system
The total energy of the system, Esystem, is given as
E = Internal energy + Kinetic energy + Potential energy
E = U + KE + PE
The change in stored energy for the system is
E U KE PE
The first law of thermodynamics for closed systems then can be
written as
Qnet Wnet U KE PE
The Molecular Origin of Internal Energy
Internal energy is stored in a system as kinetic and potential
energy.
Contributions to kinetic energy:
• Translation
• Rotation
• Vibration
Equipartition Theorem:
The average energy of each degree of freedom of a molecule
is equal to ½ kT (1/2 RT per mol)
Linear molecules: 5/2 kT; Nonlinear molecules: 3 kT
(close to room temperature)
k = R/NA = 1.38 x 10- 23 T/K the Boltzmann Constant
Measurement of Heat: Calorimetry
On the Celsius temperature scale, this mixture is defined to have a temperature of zero
degrees Celsius, which is written as 0°C; this temperature is called the ice point of water.
Another commonly used system is a mixture of water and steam in thermal equilibrium at
atmospheric pressure; its temperature is defined as 100°C, which is the steam point of water.
Bomb calorimeter
Heat Capacity
The heat capacity of a substance is a measure of the
temperature rise that occurs when the substance is heated.
c = q/ΔT
Two cases:
Heating at constant pressure and at constant volume.
c p = Δh/ΔT and c v = Δu/ΔT
For ideal gases:
c p = c v + nR (molar: c pm= c vm + R)
For linear molecules: c vm = 5/2 R, nonlinear molecules
c vm = 3 R
Temperature dependency of c v,m (hydrogen gas)
Enthalpy
If there is no change in the volume of a system and no
nonexpansion work is done o change in internal energy is
equal to the energy supplied by heat:
ΔU = Q at constant volume
State function which is related to energy changes at constant
pressure is called enthalpy:
H = U + pV
ΔH = ΔU + pΔV (+VΔp = 0)
ΔH = Q + W + pΔV
ΔH = Q - p exΔV + pΔV
ΔH = Q at constant pressure
Enthalpy
The enthalpy of a system, state property, is a measure of the
energy of a system that is available as heat at constant
pressure.
For an endothermic process, ΔH > 0;
for an exothermic process, ΔH < 0
Reaction Enthalpy
The reaction enthalpy ΔH is the change in enthalpy per mole of
substance as expressed by the stoichiometric numbers in the
chemical equation.
Example for thermochemical equation:
CH4(g) + 2 O2(g)
CO2 (g) + 2 H 2O(g) ΔH = -802 kJ
The standard reaction enthalpy 'H° is the reaction enthalpy when
reactants in their standard states change to products in their
standard states (25°C, 1 bar).
CH4(g) + 2 O2(g)
CO2 (g) + 2 H 2O(l) ΔH° = -890 kJ
The overall reaction enthalpy is the sum of the reaction
enthalpies of the steps into which the reaction can be divided.
Standard Enthalpy
The standard enthalpy of formation ΔH f° of a substance is the
standard reaction enthalpy for the formation of a substance from
ist elements in their most stable form.
Example:
2 C(s) + 3 H2 (g) + ½ O2(g)
C 2H5OH(l) ΔH f °= -277.69 kJ mol-1
Standard enthalpies of formation can be combined to obtain the
standard enthalpy of any reaction.
ΔHr ° = ΣnΔH f °(products) - ΣnΔH f°(reactants)
A cup of hot coffee does
not get hotter in a
cooler room.
Transferring heat
to a paddle
wheel will not
cause it to rotate.
Transferring heat to a wire will
not generate electricity.
These processes cannot occur
even though they are not in
violation of the first law.
Second Law of Thermodynamics
Kelvin-Planck statement
No heat engine can have a
thermal efficiency 100
percent.
As for a power plant to
operate, the working fluid
must exchange heat with
the environment as well as
the furnace.
Heat Engines
Work can easily be converted to other forms of
energy, but?
Heat engine differ considerably from one
another, but all can be characterized :
o they receive heat from a high-temperature source
o they convert part of this heat to work
o they reject the remaining waste heat to a lowtemperature sink atmosphere
o they operate on a cycle
The
work-producing
device that best fit into
the definition of a heat
engine is the steam
power plant, which is
an
external
combustion engine.
Thermal Efficiency
Represent the magnitude of the energy wasted in order
to complete the cycle.
A measure of the performance that is called the thermal
efficiency.
Can be expressed in terms of the desired output and
the required input
Desired Result
th
Required Input
For a heat engine the desired result is the net work
done and the input is the heat supplied to make the
cycle operate.
The thermal efficiency is always less than 1 or less than
100 percent.
th
Wnet , out
Qin
where
Wnet , out Wout Win
Qin Qnet
Applying the first law to the cyclic heat engine
Qnet , in Wnet , out U
Wnet , out Qnet , in
Wnet , out Qin Qout
The cycle thermal efficiency may be written as
th
Wnet , out
Qin
Qin Qout
Qin
Qout
1
Qin
The thermal efficiencies of actual and reversible heat engines
operating between the same temperature limits compare as
follows
The coefficients of performance of actual and reversible
refrigerators operating between the same temperature limits
compare as follows
The Second Law
There are many ways of stating the Second Law of thermodynamics:
• In an isolated system, a process can occur only if it increases the
total entropy S of the system.
• It is impossible to convert heat completely into work.
Entropy is a measure of disorder!
ΔS = Q rev /T
Q = n c dT
dS = n c dT/T
ΔS = n c lnT2/T1
increase in T
increase in S
The Second Law
Change of S under isothermal expansion:
W = -nRT lnV2/V1
ΔS = -W/T = nR ln V2 /V1 increase in V
increase in S
ΔS = nR ln p 1/p2 increase in pressure
decrease in S
Entropy increases when a solid melts to a liquid and when
a liquid vaporizes more disorder!
Many standard entropies are close to 85 J/(K mol)
Trouton´s constant
The Second Law
The standard reaction entropy is the difference in standard
molar entropies of products and reactants, taking into account
their stoichiometric coefficients:
ΔSr° = ΣnΔS f°(products) - ΣnΔS f °(reactants)
The standard reaction entropy is positive (increase in entropy)
if there is a net production of gas in a reaction; it is negative
(a decrease) if there is a net consumption of gas.
Equilibrium
When a system is at equilibrium, it has no tendency to change
in either direction and will remain in its state until it is disturbed
from outside the system.
Examples:
• Thermal equilibrium
• Mechanical equilibrium
• Physical equilibrium
• Chemical equilibrium
The criterion for equilibrium in thermodynamics is:
ΔStot = 0
Free Energy
This state function helps to judge whether a reaction is
spontaneous. This can be carried out in one step, using a single
table of data.
ΔStot= ΔS sys + ΔS surr
Process at T = const. and p = const.
ΔS tot= ΔS sys - ΔH/T
Introduction of the Gibbs energy: * -T
ΔG = ΔH – TΔS (= -TΔS tot)
Josiah Willard Gibbs
1839-1903
Free Energy
At constant pressure and temperature, the direction of
spontaneous change is the direction of decreasing free energy.
Equilibrium condition: ΔG = 0
The Second Law
The reaction free energy ΔGr is used as criterion of spontaneity
for a chemical reaction.
The standard reaction free energy is the difference of the
standard molar free energies of the products and of the reactants:
ΔGr° = ΣnΔGm°(products) - ΣnΔGm°(reactants)
The standard free energy of formation ΔGf° of a compound is a
measure of its stability relative to its elements!
ΔGr° < 0; compound has a lower free energy than it elements
elements have a spontaneous tendency to form the compound
ΔGr° > 0 ; the decomposition of the compound is spontaneous
The Second Law
Standard Free Energies of Formation at 25°C
Substance
Gases
ammonia NH3
Carbondioxide CO2
Nitrogendioxide NO 2
Liquids
Water
Benzene
Solids
calcium carbonate
silver chloride
ΔGf°[kJ/mol]
-16.45
-394.4
+51.3
-237.1
+124.3
___________
-1128.8
-109.8