EKBInst

EKB Installer © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Title page 1 Use for home traning only by http://plcforum.uz.ua/viewtopic.php?f=30&t=218 The original version only on http://plcforum.uz.ua/ -> About k eys and Yellow Disk http://plcforum.uz.ua/viewtopic.php?f=30&t=218 EKB Installer © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 All rights not reserved. This program is not designed for use at work place - in an age of Stuxnet/Duqu/Flame can not trust anyone, and under the guise of this program, you can slip the malicious program. Special thanks to: All the people who contributed to this programm and send k eys Спасибо дающим ключи Contents 5 Table of Contents Foreword 13 Part I English 16 1 Introduction ................................................................................................................................... 20 2 What................................................................................................................................... is the difference between authorizations and license keys? 21 3 We shall ................................................................................................................................... install keys later 23 4 Language ................................................................................................................................... 24 5 Required ................................................................................................................................... keys 24 Recom m ended .......................................................................................................................................................... 26 Missing keys.......................................................................................................................................................... 26 Bundle keys .......................................................................................................................................................... 26 6 Displaying ................................................................................................................................... the Installed License Keys 27 7 Seletct ................................................................................................................................... key 28 8 Find key ................................................................................................................................... 28 9 Unknow ................................................................................................................................... keys 29 10 Popup ................................................................................................................................... menu 29 11 FastCopy ................................................................................................................................... keys v3.0 29 12 Installing ................................................................................................................................... License Keys 30 Old Siem ens.exe .......................................................................................................................................................... 31 Type of key .......................................................................................................................................................... 33 CAL license .......................................................................................................................................................... 36 Installation of.......................................................................................................................................................... Trial keys 36 Remove Trial ......................................................................................................................................................... keys (official) 36 Removal of......................................................................................................................................................... Trial keys and their traces 40 13 Check................................................................................................................................... of keys after installation 42 14 License ................................................................................................................................... Number 42 15 Select ................................................................................................................................... disk 43 16 Yellow ................................................................................................................................... disk 44 17 Yellow ................................................................................................................................... Flash and Clone 47 18 ALM ................................................................................................................................... 49 19 transferring ................................................................................................................................... a license key to a PC without floppy disk drive 49 20 Multikey ................................................................................................................................... 51 21 Problems ................................................................................................................................... 51 key_for_PCS7_v8.0 .......................................................................................................................................................... 51 PCS7 v8.0 and.......................................................................................................................................................... key9999 52 License concept .......................................................................................................................................................... PCS 7 V7 55 Problem s w ith .......................................................................................................................................................... PCS7 v7 56 New keys .......................................................................................................................................................... 56 List index out.......................................................................................................................................................... of bounds 56 Problem s w ith .......................................................................................................................................................... ALM v3.0 HF3 58 Problem s w ith .......................................................................................................................................................... ALM v5.0 58 BATCH .......................................................................................................................................................... 59 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 5 6 EKB Installer CFC: AS License .......................................................................................................................................................... key for engineering 60 Route Control.......................................................................................................................................................... 62 Problem s w ith .......................................................................................................................................................... WinCC 63 WinCC: the num .......................................................................................................................................................... ber of process objects 66 WinCC: the num .......................................................................................................................................................... ber of archive values 67 WinCC CAS .......................................................................................................................................................... 68 WinCC Maintenance .......................................................................................................................................................... station 68 WinCC Dem o .......................................................................................................................................................... m ode 70 Problem s w ith .......................................................................................................................................................... WinCC Archive v6.2 71 I need SIUPA9WRC5--3 .......................................................................................................................................................... POWERPACK (upgrade) KEY ? 72 Program required .......................................................................................................................................................... key after installation of key 73 About EKBBackup .......................................................................................................................................................... CRC Error 73 Part II Russian 76 1 Введение ................................................................................................................................... 80 2 Мы установим ................................................................................................................................... ключи позже 81 3 Типы................................................................................................................................... ключей 82 CAL license .......................................................................................................................................................... 83 4 Выбор ................................................................................................................................... ключа 84 5 Поиск................................................................................................................................... ключа 84 6 Необходимые ................................................................................................................................... ключи 85 Рекомендуемые .......................................................................................................................................................... 86 Недостающие.......................................................................................................................................................... ключи 87 Комплексный.......................................................................................................................................................... ключ 87 7 Установка ................................................................................................................................... ключа 88 Установка с помощью .......................................................................................................................................................... Siem ens.exe 90 Установка временных .......................................................................................................................................................... ключей 91 Удаление ......................................................................................................................................................... в ременных ключей и их следов 92 8 Проверка ................................................................................................................................... ключей после установки 94 9 Неизвестные ................................................................................................................................... базе ключи 95 10 Элементы ................................................................................................................................... управления 95 Дерево со списком .......................................................................................................................................................... программ 95 Tаблица со списком .......................................................................................................................................................... ключей 95 Ввод серийных .......................................................................................................................................................... номеров 96 Выбор языка .......................................................................................................................................................... интерфейса 96 Выбор диска .......................................................................................................................................................... назначения 97 Экспорт таблицы .......................................................................................................................................................... 98 11 Yellow ................................................................................................................................... Disk 98 12 Yellow ................................................................................................................................... Flash и её клонирование 101 13 FastCopy ................................................................................................................................... keys v3.0 103 14 Multikey ................................................................................................................................... 104 15 Проблемы ................................................................................................................................... 104 Проблемы при .......................................................................................................................................................... запуске программы 104 Проблемы после .......................................................................................................................................................... установки ALM v3.0 HF3 106 Проблемы после .......................................................................................................................................................... установки ALM v5.0 106 Проблемы с.......................................................................................................................................................... ВыньСС 107 WinCC Dem o.......................................................................................................................................................... m ode 110 Нуж ен SIUPA9WRC5--3 .......................................................................................................................................................... POWERPACK (upgrade) ключ ? 111 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Contents 7 После установки .......................................................................................................................................................... ключа программа всё равно требует ключ 112 Об ошибке EKBBackup .......................................................................................................................................................... CRC Error 112 License concept .......................................................................................................................................................... PCS 7 V7 114 License concept .......................................................................................................................................................... PCS 7 V8.0 115 Какие ключи.......................................................................................................................................................... нуж ны для PCS7 v8.0 117 Part III Francais 120 1 IntoductionF ................................................................................................................................... 121 2 Nous................................................................................................................................... йtablirons les clйs plus tard 122 3 Type................................................................................................................................... de licence 123 4 Numйro ................................................................................................................................... de licence 124 5 Required ................................................................................................................................... keys 124 6 Unknow ................................................................................................................................... keys 126 7 desactiver ................................................................................................................................... la Trial Licence 126 Install Trial keys .......................................................................................................................................................... 129 Rem ove Trial.......................................................................................................................................................... keys 130 8 Siemens.exe ................................................................................................................................... 130 9 transferring ................................................................................................................................... a license key to a PC without floppy disk drive 131 Part IV Italiano 134 1 Intoducione ................................................................................................................................... 134 2 We shall ................................................................................................................................... install keys later 135 3 Tipo................................................................................................................................... di licenza 136 4 Numero ................................................................................................................................... di licenza 137 5 Chiavi ................................................................................................................................... necessari 138 6 Installazione ................................................................................................................................... di chiavi di licenza 139 7 Unknow ................................................................................................................................... keys 140 8 disattivare ................................................................................................................................... la Trial License 140 9 Siemens.exe ................................................................................................................................... 143 10 trasferire ................................................................................................................................... la chiave di licenza su una PC senza drive per dischetti 145 Part V Espanol 148 1 IntoductionE ................................................................................................................................... 149 2 Estableceremos ................................................................................................................................... las llaves tarde 150 3 Tipo................................................................................................................................... de licencia 151 4 N° de ................................................................................................................................... licencia 153 5 Required ................................................................................................................................... keys 153 6 Encontrar ................................................................................................................................... la llave 155 7 Install ................................................................................................................................... key 156 8 Yellow ................................................................................................................................... Disk 157 9 Export ................................................................................................................................... table 159 10 Unknow ................................................................................................................................... keys 159 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 7 8 EKB Installer 11 desactivar ................................................................................................................................... la licencia de prueba 159 Install Trial keys .......................................................................................................................................................... 163 Rem ove Trial.......................................................................................................................................................... keys 164 12 Siemens.exe ................................................................................................................................... 164 13 transferir ................................................................................................................................... una licencia a un PC que no dispone de disquetera 165 Part VI Deutsche 168 1 IntoductionG ................................................................................................................................... 169 2 Wir werden ................................................................................................................................... die Schlьssel spдter aufstellen 171 3 Lizenz-Typ ................................................................................................................................... 172 4 Lizenznummer ................................................................................................................................... 173 5 Required ................................................................................................................................... keys 174 6 Installieren ................................................................................................................................... von License Keys 175 7 Yellow ................................................................................................................................... Disk 177 8 Unknow ................................................................................................................................... keys 179 9 Wie ................................................................................................................................... kann die Trial License deaktiviert werden 179 Install Trial keys .......................................................................................................................................................... 182 Rem ove Trial.......................................................................................................................................................... keys 183 10 Siemens.exe ................................................................................................................................... 183 11 Lizenz-Schlussel auf einem PC ohne Diskettenlaufwerk zu transferieren ................................................................................................................................... 185 Part VII Portuguese 188 1 Introducion ................................................................................................................................... 189 2 We shall ................................................................................................................................... install keys later 190 3 Numero ................................................................................................................................... de Licenca 191 4 Required ................................................................................................................................... keys 192 5 Instalacao ................................................................................................................................... de Chaves de Licenca 193 6 Siemens.exe ................................................................................................................................... 195 7 Nao ................................................................................................................................... conhece chaves 195 Part VIII Chinese 198 Part IX Key list 202 1 Step7 ................................................................................................................................... 240 2 Step7 ................................................................................................................................... Professional 240 3 Step7 ................................................................................................................................... Basic v10.5 (TIA Portal) 241 TIA Portal v10.5 .......................................................................................................................................................... RUS 242 4 BATCH ................................................................................................................................... 243 5 Braumat ................................................................................................................................... 245 6 CEMAT ................................................................................................................................... 246 7 CFC................................................................................................................................... 249 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Contents 9 CFC Dow nload .......................................................................................................................................................... Warnning 249 8 DocPro ................................................................................................................................... 252 9 D7-SYS ................................................................................................................................... 252 10 iMAP ................................................................................................................................... 252 11 S7-GRAPH ................................................................................................................................... 253 12 Logon ................................................................................................................................... 253 Logon Rus .......................................................................................................................................................... 253 13 Maintenance ................................................................................................................................... 253 Maintenance.......................................................................................................................................................... Station 2009 253 Maintenance.......................................................................................................................................................... Station 2007 254 Maintenance.......................................................................................................................................................... PCS 7.1 255 14 Modular ................................................................................................................................... Safety System ES 2008 256 15 Motor ................................................................................................................................... Starter 256 16 Net ................................................................................................................................... 257 Net 2008 v8.1.......................................................................................................................................................... 261 Net 2008 v7.1.......................................................................................................................................................... 262 NET 2007 v7.0.......................................................................................................................................................... 263 NET 2006 v6.4.......................................................................................................................................................... 264 Net 2005 and.......................................................................................................................................................... < 265 Which license .......................................................................................................................................................... do you need for S7 REDCONNECT? 265 FAQ Russian.......................................................................................................................................................... 267 17 PDiagn ................................................................................................................................... 268 18 PDM................................................................................................................................... 268 19 PID ................................................................................................................................... 270 20 PCS7 ................................................................................................................................... 271 PCS7 v8.0... v9.0 .......................................................................................................................................................... 274 PCS7 v7.1 .......................................................................................................................................................... 282 PCS7 v7.0 .......................................................................................................................................................... 283 PCS 7 V7.0 ......................................................................................................................................................... licensing model 285 KeySet pcs7 v7.0 ......................................................................................................................................... ES 288 KeySet pcs7 v7.0 ......................................................................................................................................... Asset ES 289 KeySet pcs7 v7.0 ......................................................................................................................................... Client 289 KeySet pcs7 v7.0 ......................................................................................................................................... Asset RT 100 PO 289 KeySet pcs7 v7.0 ......................................................................................................................................... SER RED PO2000 289 Configurable ......................................................................................................................................................... size of a PCS 7 289 PCS7 Russian ......................................................................................................................................................... 293 KeySet PCS7.......................................................................................................................................................... v6.1 296 PCS7 v6.0 .......................................................................................................................................................... 297 PCS7 v5.0 .......................................................................................................................................................... 297 21 PLCSIM ................................................................................................................................... 297 22 PowerControl ................................................................................................................................... 297 23 ProTool ................................................................................................................................... 298 24 RF-Manager ................................................................................................................................... 298 25 Safety ................................................................................................................................... Matrix 298 26 SICAM ................................................................................................................................... PAS 299 27 Simatic ................................................................................................................................... IT 299 Production Suite .......................................................................................................................................................... 302 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 9 10 EKB Installer PRS v6.1......................................................................................................................................................... SP1 304 PRS v6.3......................................................................................................................................................... 305 Report Manager .......................................................................................................................................................... 306 Historian .......................................................................................................................................................... 306 Historian ......................................................................................................................................................... v6.1 307 Historian ......................................................................................................................................................... v6.3 308 Interspec .......................................................................................................................................................... 308 Unilab .......................................................................................................................................................... 309 Sim atic IT Russian .......................................................................................................................................................... 309 Production ......................................................................................................................................................... Suite Russian 309 Production ......................................................................................................................................................... Suite 318 SIMATIC IT ......................................................................................................................................................... Historian 320 SIMATIC IT ......................................................................................................................................................... Historian 326 SIMATIC IT ......................................................................................................................................................... Unilab 328 SIMATIC IT ......................................................................................................................................................... Unilab 330 SIMATIC IT ......................................................................................................................................................... Interspec 332 SIMATIC IT ......................................................................................................................................................... Interspec 335 28 SIMOCODE ................................................................................................................................... ES 336 29 SIMOTION ................................................................................................................................... Scout 337 30 Sinaut ................................................................................................................................... 338 31 SINEMA ................................................................................................................................... 338 32 SinuTrain ................................................................................................................................... 340 33 SFC................................................................................................................................... 341 34 SmartLabel ................................................................................................................................... 342 35 Telecontrol ................................................................................................................................... Server Basic 342 36 Teleservice ................................................................................................................................... 342 37 TIA Portal ................................................................................................................................... v10...v14 342 Step 7 Prof (2011) .......................................................................................................................................................... 343 WinCC Flexible .......................................................................................................................................................... (2011) 343 WinCC Prof (2011) .......................................................................................................................................................... 345 Step 7 Safety.......................................................................................................................................................... (2011) 347 PID Professional .......................................................................................................................................................... v11 347 38 Soft ................................................................................................................................... Starter 347 39 Visionscape ................................................................................................................................... 348 40 WinAC ................................................................................................................................... 349 41 WinAC ................................................................................................................................... MP 349 42 WinCC ................................................................................................................................... v5.0... v7.7 350 WinCC v7.4 .......................................................................................................................................................... 352 WinCC v7.3 .......................................................................................................................................................... 353 WinCC v7.2 .......................................................................................................................................................... 354 WinCC v7.0 .......................................................................................................................................................... 359 WinCC_v7_list ......................................................................................................................................................... 361 WinCC v6.2 .......................................................................................................................................................... 368 WinCC 6.2 ......................................................................................................................................................... SP2 370 WinCC 6.2 ......................................................................................................................................................... Russian 371 WinCC/Server ......................................................................................................................................... 373 WinCC/Redundancy ......................................................................................................................................... 374 WinCC/Central Archive ......................................................................................................................................... Server (CAS) 374 WinCC Archive......................................................................................................................................... 375 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Contents 11 WinCC/UserArchives ......................................................................................................................................... 377 WinCC/Web Navigator ......................................................................................................................................... 378 WinCC/Dat@Monitor ......................................................................................................................................... 378 IndustrialDataBridge ......................................................................................................................................... 383 WinCC/Connectivity ......................................................................................................................................... Pack 384 WinCC/Maintenance ......................................................................................................................................... Station 2007 384 WinCC/ODK ......................................................................................................................................... 387 WinCC/Audit ......................................................................................................................................... 387 WinCC /ChangeControl ......................................................................................................................................... 389 WinCC/IndustrialX ......................................................................................................................................... 390 WinCC/ProAgent ......................................................................................................................................... 390 WinCC v6.0 SP4 .......................................................................................................................................................... 390 WinCC v6.0 SP3 .......................................................................................................................................................... 390 WinCC v6.0 SP2 .......................................................................................................................................................... 390 WinCC v5.0 .......................................................................................................................................................... 390 WinCC/Dow ntim .......................................................................................................................................................... eMonitor V1.0 390 WinCC/ProcessMonitor .......................................................................................................................................................... V1.0 391 43 WinCC ................................................................................................................................... Flexible 392 WinCC_Flexible .......................................................................................................................................................... 2008 393 WinCC_Flexible .......................................................................................................................................................... 2007 395 WinCC_Flexible .......................................................................................................................................................... 2005 396 WinCC_Flexible .......................................................................................................................................................... 2004 397 Part X Simatic Serial Number 400 1 Step5 ................................................................................................................................... 400 2 Step7 ................................................................................................................................... 400 3 Sinutrain ................................................................................................................................... 400 4 Simocode ................................................................................................................................... 400 5 WinAC ................................................................................................................................... RTX 401 6 WinCC ................................................................................................................................... 401 7 DriveES ................................................................................................................................... 401 8 Sybase ................................................................................................................................... SQL Anywhere 401 9 Help&Manual ................................................................................................................................... 401 Part XI Simatic IT 404 1 BusinessObjects_Enterprise_610_oem_76739.signed.key.xml ................................................................................................................................... 407 2 BusinessObjects_Enterprise_610_oem_134495.signed.key.xml ................................................................................................................................... 408 Part XII FAQ official 412 1 How do you store licenses on a server and protect them from unauthorized ................................................................................................................................... access? 412 2 How can you deactivate the Trial License when the message appears indicating that the Trial License has expired, although the Floating ................................................................................................................................... License has been installed? 418 3 How can you keep SIMATIC license files working and avoid loss of authorization? ................................................................................................................................... 422 4 How................................................................................................................................... do you install, uninstall and upgrade authorizations? 426 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 11 12 EKB Installer 5 How can you open the Automation License Manager when the message ................................................................................................................................... "No connection to the License Key Handler" appears? 429 6 What options are there for transferring a license key to a PC without ................................................................................................................................... floppy disk drive? 436 7 How can you use license keys that are located on a central computer ................................................................................................................................... (server) on a local computer? 436 8 How can you install the Automation License Manager when the installation in Windows 2000 is aborted with the message "Server ................................................................................................................................... service not active"? 438 9 Request for recovering authorizations of SIMATIC Industrial Software ................................................................................................................................... 441 10 What ................................................................................................................................... is the difference between authorizations and license keys? 442 11 STEP 7 V5.3 - User authorization by the Automation License Manager ................................................................................................................................... 443 12 Difference ................................................................................................................................... between ALM and SIMATIC Logon 445 13 STEP ................................................................................................................................... 7 V5.3 - notes on using STEP 7 License Keys 447 14 License ................................................................................................................................... concept PCS 7 V7 451 15 License ................................................................................................................................... concept PCS 7 V8.0 452 Part XIII Plugin for Total Commander 456 Part XIV How unpack files 460 Part XV About http://plcforum.uz.ua 464 1 About ................................................................................................................................... closed plc.net.ru 464 2 About ................................................................................................................................... closed SIMATIC.net.ru 465 Part XVI Premium Studio DVD 468 1 English ................................................................................................................................... 469 2 Russian ................................................................................................................................... 470 3 Deutsch ................................................................................................................................... 470 4 Francais ................................................................................................................................... 471 Part XVII Send keys 474 Part XVIII Stuxnet, Ququ, Flame 476 Index 477 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Foreword Foreword This is just another title page placed between table of contents and topics © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 13 Top Level Intro This page is printed before a new top-level chapter starts Part I 16 1 EKB Installer English The original version only on http://plcforum.uz.ua/ - some rogues began to circulate counterfeit with backdoors and viruses - check the MD5 checksum romanian gypsy distribute dangerous fakes !!! how to use https://www.youtube.com/watch?v=SpR165EPMBY Video How to clone a USB stick 15/03/2010 closed by hoster http://plc.net.ru - today (2012) is FALSE site - name of the website plc.net.ru is stolen from us 19/03/2010 reopened forum with links http://www.plcforum.uz.ua perhaps we will change the name of the forum from UZ.UA if this happens, then you can learn a new name on the forum http://rutracker.org/forum/viewforum.php? f=1192 for add keys send it to plcsim@mail.ru, plcnetru@mail.ru This program is not designed for use at work place - in an age of Stuxnet/Duqu/Flame/WannaCrypt can not trust anyone, and under the guise of this program, you can slip the malicious program. Sometimes I think I created a monster - do not put the keys in the industrial facilities! PCS7 v8.0, TIA Poprtal, WinCC and key9999 Problems with new ALM v5 Simatic IT Business Objects Enterprise signed keys Official FAQ FastCopy keys v3.0 2739 keys v2017.08.25 add info for Sinema Server v14, Simotion Scout v5.1 6a3276e48041a9fb1ead510e94246245 *Sim_EKB_Install_2017_08_25.exe © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English v2017.08.11 internal for testing Sinema Server v2017.08.10 add info for Braumat, PCS7 v9.0 9df5c73893fa0ee7c5c0c7c4df07f0f5 *Sim_EKB_Install_2017_08_10.exe v2017.08.09 internal for testing Braumat, PCS7 v9.0 9518ba050d1c52f3b89746b952881aac *Sim_EKB_Install_2017_08_09.exe v2017.08.05 internal for testing Braumat, PCS7 v9.0 9d0080d82d02ea9dbde0322db65ba09d *Sim_EKB_Install_2017_08_05.exe 2017.07.** fake from CIA fakers !!! romanian forum distribute dangerous fakes !!! v2017.06.03 add info for Step7 v5.6 d94894697bcba56949fcf47590b8746f *Sim_EKB_Install_2017_06_03.exe v2017.04.13 internal for testing v2017.04.03 - fake from CIA fakers v2017.04.01 add some info for TIA, 80K RT Flexible 2008, Sinaut and optimized some keyset 75c14222a978ec85be055decd8fbee6d *Sim_EKB_Install_2017_04_01.exe v2017.01.17 add some info for Panel 8d672a831dce6250d8feafe04f361557 *Sim_EKB_Install_2017_01_17.exe v2017.01.14 add some info for IS PCS7 949ea884cc9b4f41a234c7e4e2883556 *Sim_EKB_Install_2017_01_14.exe v2016.11.28 add one info for SoftStarter and Simocode 14 3af2df6969bd421718a2be9be3cb14cf *Sim_EKB_Install_2016_11_28.exe v2016.11.25 add one info for TIA Portal 57b9f7b47daf28f6f0caf1caa5e8cebc *Sim_EKB_Install_2016_11_25.exe v2016.11.11 add one info for SICAM 2f596982e0857a6addc0fce8ad5354d2 *Sim_EKB_Install_2016_11_11.exe v2016.10.26 add one info for TIA Portal v14 191d03600f175d7697c9dabafc1925b6 *Sim_EKB_Install_2016_10_26.exe v2016.10.11 add one info for TIA Portal v14 58d7b14c9dc7af6c7515296d9baac1c3 *Sim_EKB_2016_10_11_TIA14.exe v2016.10.10 add some info for TIA Portal v14 bed8861d03f384e411e53b05cb999f48 *Sim_EKB_Install_2016_10_10_TIA14.exe v2016.09.06 add some info for WinCC TeleControl 0317bb0bf48251acab72dab273411860 *Sim_EKB_Install_2016_09_06_TC.exe v2016.08.16 internal for testing v2016.07.16 add some info for WinCC WebNavigator v7.4 e190b1c240fe0908c2fc6085bbec413c *Sim_EKB_Install_2016_07_16.exe v2016.05.30 add some info for PCS7 v8.2 950187a0303ab55fb99d30eb46f006f3 *Sim_EKB_Install_2016_05_30_DM.exe v2016.05.06 add some info for PCS7 v8.2 35e7872a5adf9e769ad06ec4151f1947 *Sim_EKB_Install_2016_05_06.exe v2016.04.25 add some info for WinCC v7.4, PCS7 v8.2, TIA Portal v14 89e4224d5710ee2f1d656e5d3ea2c5c5 *Sim_EKB_2016_04_25_WinCC.exe v2016.04.12 internal for testing v2016.03.12 add some info for Sinutrain v4.7 bbda2902d765225085a378d0d3b78632 *Sim_EKB_Install_2016_03_12_Sinutrain.exe private for testing v2015.11.24 add some info for Braumat v7.0, PDM v9.0 b34930d7d8f0dabf8f8e269aa89aa422 *Sim_EKB_Install_2015_11_14_Bramaut.exe private for testing v2015.10.22 add some info for PCS7 8.1 SMART station 96440b85e6646e1722ac0387a17f37e3 *Sim_EKB_Install_2015_10_22.exe v2015.10.21 add some info for SinuTrain v4.7 eee5018351d5d99606c00b41a9df2f0c © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 17 18 EKB Installer *Sim_EKB_Install_2015_10_21.exe v2015.10.14 add some info for Audit v7.3 d767bea8610dc49141f57730853c7743 *Sim_EKB_Install_2015_10_14.exe v2015.09.04 add some info for Software CPU 1507S //MD5: 589b2b79d3f67007e2ef613b81e411f6 *Sim_EKB_Install_2015_09_04.exe v2015.08.31 add some info for Safety ES v1.0, Software CPU 1500S //MD5: 7938f4a9c3976c12566ebad1ea7da9bf *Sim_EKB_2015_08_31.exe 04.08 is romanian gypsy fake !!! plc.myforum.ro distribute dangerous fakes !!! v2015.03.29 add some info for NET v13 //MD5: 542e0e7697460598cec371f5160b62be v2015.02.10 add some info for Simocode v13 //MD5: 7d5f0a35915f39e0009635f750630adb v2015.02.01 add some info for Cemat v8.0 //MD5: f4bea40978b125de557fa43845e8377e v2014.12.27 add some info for Cemat v8.0 //MD5: c3d7b48a5c0c86a8cdcf4f8d64e29bab v2014.11.11 add some info for PCS7 v8.1 //MD5: e8ad4a811d8a76ca39ff0ef12248e12f v2014.11.09 add some info for PCS7 v8.1 //MD5: 50923874052344ddcf031a6a036a224f v2014.10.02 add some info for PCS7 v8.1 //MD5: 858cbee929bec0a41eb7f94391ce13f7 09.19 is romanian gypsy fake !!! plc.myforum.ro distribute dangerous fakes !!! v2014.09.13 add some info for SinuTrain v4.5 //MD5: 8a788f25118e84f9f5a6cef6de486fff v2014.09.13 add some info for Simatic WinCC v7.3/v13, Scout v4.4 //MD5: 91079d468dd72fa0e5a47f556e750539 v2014.08.05 test for Scout v4.4 //MD5: 029d67e86ba859f2cc584c0076420a68 08.01 is romanian gypsy fake !!! plc.myforum.ro distribute dangerous fakes !!! v2014.07.28 add some info //MD5: 50659cf2c2f972460692ca7ce9461d1d v2014.03.08 add some info //MD5: f40d1b432f529f53002d9514e7a3bf1b v2013.12.25 add some info for Simatic Net v12 //MD5: 0ade8808e789e6e704e66b0877c1c04f *Sim_EKB_Install_2013_12_25.exe v2013.12.10 add some info for Simocode v12 // MD5: 10a0c74548ba89b80e98f2664289ba79 v2013.12.02 add some info for PDM v8.1 v2013.12.01 add some info for Softnet Security Client v4.0 v2013.05.26 add some info for WinCC v7.2 v2013.03.08 fix 1 key for TIA Portal v12 v2013.03.03 add TIA Portal v12, S7-Technology, fix Unicode bug for some new keys folder v2013.03.01_test add TIA Portal v12 with some bug for all Unicode version from v2012.10.12 v2013.01.21 fix bug with PID v11.0 keys, add some info for D7-SYS v8.0 v2012.10.12 add Chinese language (possible Cyryllic chars in the European interfaces :) ASCII > Unicode v2012.09.29 add some info for Easy Motion v11.0, SinuTrain 4.4 v2012.07.29 add some info for PID v11.0 *but with error :( v2012.07.23 add some info for Simotion Scout v4.3 v2012.07.19 add some info for Telecontrol Server Basic v2.0 and fix comment bug v2012.07.18 add some info for PDM v6.1. v2012.03.08 add some info for PCS7 v8.0. v2012.02.26 add some info forWinCC Flexible 2008 SP3, Simatic Net v8.1. Fixed bug of euristic engine. v2012.01.26 add some info for Simatic Net v8.1 14/05/2011 add some info for TIA Portal V11 15/02/2011 This internal version for testing add some keys 11/10/2010 add some info for.... 10/10/2010 add one info for "SIK/ SIMATIC S5 PMC IE V7.0" ("A9S5IE70") 09/09/2010 add some info for WinCC DowntimeMonitor, WinAC, fix bug for comp and Virtual Machine with 1 HardDisk partition 09/05/2010 add keys for WinCC Flexible 2008 SP2 options v1.3, Sinaut, fixed one ALM v5 bug 20/04/2010 add some keys Safety Matrix, PCS7 powerrate, PCS7 CFC AS RT SIFPZASRPX9999A 20/03/2010 add some keys, "option Recommended" and info about closed PLC.NET.RU and reopened © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 19 http://plcforum.uz.ua 26/08/2009 add keys for TIA Portal v10.5, Braumat, Maintenance Station 2009 04/04/2009 add keys for WinAC MP 2008, PCS7 v7.1 22/12/2008 add keys for WinAC 2008, Simatic Net 2008, RF-Manager 2008 20/08/2008 add keys for WinCC Flexible 2008 24/07/2008 Open FastCopy v3 key option 21/07/2008 add keys for WinCC v7.0 29/06/2008 add keys for PID Tools v5.2, D7-SYS v7.0, PowerControl, RF-Manager 14/03/2008 add keys for Simatic IT and multikey description 23/02/2008 add keys for CEMAT v7.0 , WinCC v6.2 and PCS7 v7.0 18/02/2008 add keys for Simocode 2007 15/02/2008 add keys for DocPro 5.4, WinAC MP 2007, Soft Starter 2007 and fix error for "New" folder07/12/2007 add keys for Sinema E 2006 and fix error for Motor Starter 2007 (but add bug - not install keys from "New" folder) 30/11/2007 add keys for Motor Starter 2007, Net 2007 27/11/2007 add keys for SmartLabel v3.0 HF1, WinAC/RTX 2005 SP3 07/11/2007 Add and change some Tags keys for WinCC v6.2 and PCS7 v7.0 As it in a stage of development some functions can be not completely accessible or be carried out with flaws Direct record on a hard disk and Flash memory works. On Flash memory long keys - the list some minutes enter the name only It is necessary to add direct record of keys on a diskette It is necessary to correct for the list of keys In the previous versions there were problems with some short licenses ( WinAC, SmartLabel ). In the given version the part of problems is solved. In far, far years Siemens has charged development of protection for the software products to StopCopy corporation. That has developed protection on the basis of the key files placed on special image to the formatted Yellow diskette - from here and the name. Thus affirmed, that protection up to that is reliable, that " it will be reliable to preserve your investments ". Big human thanks experts StopCopy for the done operation in the field of creation of an atmosphere of availability of products of Siemens to broad masses of programmers. It has made program and hardware solutions very popular and demanded worldwide, that has allowed to compete adequately to other manufacturers of automation even in their territory. To take for an example of the USA with and them B&R and General Electric... And accordingly has really saved up the nested investments. In fact iron equally should be bought all from Siemens. The given program is intended for installation of keys of licenses in case of, when: There has occurred " a rainy day of the programmer " - the system has flied together with all authorizations, and to work it is necessary, even in remote areas; When there was a new hot product, and the heads yet does not give money for it. Simply you wish to study for the general development. It is developed in connection with release of version ALM 3.0 - the Authorization Licenses Manager after whom, so-called, "fastcopy" long keys of authorization have ceased to work because of their ignoring by this Authorizator. "Fastcopy" keys could be copied simply in the directory of licenses C: \AX NF ZZ. They used auxiliary "hole" in system of authorization ALM <v3.0 which have been covered with output Step7 v5.4 SP1. Also additional coding the keys, therefore new keys have been applied are not visible in ALM v2.2. New keys are incorrectly displayed in old versions of programs EKB_Rename, EKB_Backup and in EKB_Install <v.2007.03.03 and are not visible in ALM v1 and v2. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 20 EKB Installer I do not call to use a software of Siemens in the mercenary purposes. Programs for the industrial purposes basically should be pawned in estimates of projects and be gained on money of the customer. Very few people will come in a head to put the customer left PCS7 with the left keys and without the certificate on large production. And for house usage probably there is nothing worse fuss with license diskettes. There were cases when the worn out firm Yellow license started to be showered for Intourist with miss of keys in far remote places without phone and the Internet. I recommend to buy from Siemens Premium Studio 2008 for 90 euros for acquaintance with Simatic programs 1.1 Introduction The Main Window comprises the following buttons and fields: Tree with the list of programs and the table with the list of keys Field for a conclusion of comments and the help information Line of a choice of language of the interface Line of a choice of a disk for installation of keys and the button of updating of the list of disks Lines of input of serial numbers Line and the button for search of a key by the set word The button of a call of a window for work with images of Yellow diskettes Field of a choice of preferences of type of the license at installation Buttons of installation short, long or all chosen keys Select key types for install How can you deactivate the Trial License when the message appears indicating that the Trial License has expired, although the Floating License has been installed? Install short key from old Siemens.exe © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 1.2 21 What is the difference between authorizations and license keys? What is the difference between authorizations (AuthorsW short keys) and license keys (ALM long keys) ? http://support.automation.siemens.com/WW/view/en/19020864 Configuration Notes: License keys are the new authorizations as from STEP 7 V5.3. With the new license keys we are implementing a new concept in the licensing of SIMATIC software. Whereas the authorizations up to and including STEP 7 V5.2 were valid only for a specific version of the software, the license keys as from STEP 7 V5.3 are automatically also valid for the earlier versions of the same software. This validity however is restricted only to the programs that are licensed with the license keys. For programs licensed with an authorization only the authorization valid for the version continues to be valid. Another new feature is that license keys can be stored on a network driver and can then be used by various computers (floating license). The options that the SIMATIC world makes available to you with this type of licensing are © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 22 EKB Installer described in Entry ID 19021092. You can tell from the license number whether a program is protected by an authorization or by a license key. The license number is shown in the Automation License Manager (ALM). An authorization license number has ten digits, a license key license number has twenty digits. Whereas there were earlier only authorizations and emergency authorizations, there are now the following different types of license keys. Notes on authorizations (AuthorsW short keys): Authorizations can only be saved and repaired on the original yellow or red floppy disks and installation is only possible on internal hard disk drives and partitions or network drives, but not on USB sticks. To ensure working with the associated software the authorization must be available locally on the hard disk on which the software is installed. Authorizations cannot be transferred via the Internet nor installed on USB hard disks. There is an emergency authorization X*.EKB on Red or Yellow floppy disk Notes on license keys (ALM long keys): License keys cannot be restored on the floppy disks on which they were supplied, but can only be repaired on the PC/PG on which they are actually located. There is no longer an emergency authorization on floppy disk for license keys, because the software is always runnable if a valid license key has already been installed. So if there is a defective license key on the hard disk, working with the software is only interrupted at regular intervals with a message informing you that there is no valid license key available. As from ALM V1.1 SP1 you can also store license keys on USB sticks. A Trial License Key is installed from the CD. It can be activated via the actual SIMATIC application once for 14 days and is for evaluation purposes. You cannot restore or move the Trial License Key. Software products that are released for utilization with license keys can also use newer license keys. More information on this is also available in the Online Help of the Automation License Manager under Notes on utilizing "older" software versions. See also: Type of key © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 1.3 We shall install keys later During installation of programs Simatic it is refused installation of keys. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 23 24 1.4 EKB Installer Language Select one of the available languages in the drop-down list box. 1.5 Required keys The list of necessary keys for the installed programs. But this list is not full ! "I don't k now all you fantasies..." Some programs also required others keys ! From tag keys install only one with necessary quantity of tags (an example for CFC in figure). © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English you can view only recommended keys © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 25 26 1.5.1 EKB Installer Recommended you can view only recommended Required keys 1.5.2 Missing keys You can specify names of missing keys in the manager of licenses ALM 1.5.3 Bundle keys Complex key S7PROF* for professional version STEP7 can be used instead of 4 separate keys A17104 *, A1PLC_ *, A1S7GR *, A1SCL_*. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 27 SIFLS7PROF1100.EKB STEP 7 V11 Professional combo keyfor use with STEP7 Professional version v5.5 and v11.0 SIFLA9XEP11100.EKB WinCC flexible Advanced combo key for use with WinCC flexible 2008 and WinCC Advanced v11.0 Key PCS7TT* for program PCS7 can be used instead of the whole complete set of keys. 1.6 Displaying the Installed License Keys Displaying the Installed License Keys You can view all installed license keys using the line "Installed only" in the tree view or select the drive in the list © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 28 1.7 EKB Installer Seletct key For a choice of a key press on Check Box. Repeated pressing will cancel a choice. For a choice of all keys in current section press Check Box in the first line. Repeated pressing will cancel a choice in current section. 1.8 Find key Full-text search is a search for a word or a word combination through the complete text of all entries in the database. Type the necessary word or word combination in the Edit line or copy them from the Clipboard and click "Find key" button. For example: part of key name Step or Step prof part of filename s7prof The table displaying the list of entries containing the search pattern you entered. I always use this option © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 1.9 29 Unknow keys Example of new keys after installation of new programs. 1.10 Popup menu You can: Copy text to clipboard Save the current table Create Yellow Disk image file with 1 key 1.11 FastCopy keys v3.0 Second generation of LONG FastCopy license keys anew work with ALM v3 and ALM v4.0 "Fastcopy" keys could be copied simply in the directory of licenses C: \AX NF ZZ. "Fastcopy v1" used auxiliary "hole" in system of authorization ALM <v3.0 which have been covered with output Step7 v5.4 SP1. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 30 EKB Installer It is developed in connection with release of version ALM 3.0 - the Authorization Licenses Manager after whom, so-called, "fastcopy" long keys of authorization have ceased to work because of their ignoring by this Authorizator. "Fastcopy v3" work without problems with ALM v3 and ALM v4.0. Only FastCopy key from EKB_Install is realy FastCopy key. "Fixed" and "FastCopy" key from EKB_Backup (by Fubrus) have bugs. but wait ALM 4.1 1.12 Installing License Keys You can install one key or group of the chosen keys on the specified flexible, rigid disks or external USB a disk (Flash stick or Flash card in cardreader). Thus there are some variants. It is possible to choose one of variants of installation chosen keys: 1. All - short and long 2. Only long 3. Only short 4. Installation with preference: Are installed long and if is not present long for the chosen type of the license the short variant of a key is installed. Are installed short and if is not present short for the chosen type of the license the long variant of a key is installed. Select type of keys: Float, Single, Rental, Long, Short © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 31 Thus on the button of the general installation the picture according to a choice varies. If you connect or disconnect replaceable carriers during work of the program for updating the list of carriers{bearers} press the button " To update the list of disks ". Again connected carrier will appear in the list. After installation corresponding names of keys will be painted If the key is already installed on a disk there will be a window with the request to confirm installation atop of available. [****] See Check of keys after installation [****] 1.12.1 Old Siemens.exe For installation of short keys from a set it is possible to use program Siemens.exe. Copy in the catalogue with the program demanded keys (no more than 100 keys lumpsum) and start the © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 32 EKB Installer program. If in the catalogue with Siemensexe there are no keys at start the following message will be show. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 33 1.12.2 Type of key Licenses in the Automation License Manager The standard license types and license types listed below are available: Standard Description License Types Single license SISL*.EKB and all short keys (not X*.EKB) Unlimited use on any one Use of the software with this license is permitted oncomputer. any one computer for an unlimited period. The type Unlimited by time of usage is defined by the certificate of license. Count tags relevant license Unlimited use on any one Use of the software with this license includes right computer or via the network. Floating license of use for simultaneous usage for an unlimited period. The software can be installed at multiple Unlimited by time SIFL*.EKB locations. Count tags relevant license Count relevant Use of the software with this license is limited to: license The number of tags stipulated in the SIFC*.EKB agreement Count tags relevant license Rental license Limited use as stipulated in the rental contract. Use of the software with this license is limited to: © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 34 EKB Installer Limited by time: The number of hours stipulated in the agreement SIMF*.EKB SIRT*.EKB The number of days after first use as stipulated in the agreement SIRT*.EKB SIMF*.EKB 1..50 hours 1...N days To install 365 days Rental keys: Note: the time remaining for the rental license is indicated in the information area of the tooltips taskbar. Limited use (max. 14 days) for tests and for validating (with disclaimer). Trial license Use of the software with this license is limited to: Limited by time = 14 days A validity period of, for example, a maximum of 14 days. Count tags relevant license SITT*.EKB A specific number of days after first use Use for testing and validation (excludes liability) A SITT*.EKB Trial License Key is installed from the CD. It can be activated via the actual SIMATIC application once for 14 days and is for evaluation purposes. You cannot restore or move the Trial License Key. But... Use of the software with this license is limited to: emergency authorization X*.EKB A validity period of, for example, a maximum of 14 days. A specific number of days after first use Use for testing and validation (excludes liability License Types Description © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 35 Unlimited license Use of the software with this license is unlimited. Use of the software with this license is limited to: The number of tags stipulated in the agreement (for WinCC, PDM, CFC and SIFCY9WTGX06001 others). Count relevant license (Tags) SIFC*.EKB The number of PowerObjects (PO) stipulated in the agreement for PCS7 v7. PO ~ Tags Pay per use license Use of the software with this license is limited to the use conditions stipulated in the agreement. SIFP*.EKB Number of Clicks !? SIFPZASRPX99991 Use of the software with this license is limited to: The number of hours stipulated in the agreement Demo license The number of days after first use as stipulated in the agreement Note: the time remaining for the demo license is indicated in the information area of the Quick Info taskbar. Contract license Use of the software with this license is unlimited. An upgrade may call for specific system status requirements: Upgrade license SIUP*.EKB SIPP*.EKB Keys for updating the license consist of two keys *.EKB and *.UPG. No need wait SIUP* key. An upgrade license enables you to convert I haven't Upgrade keys. an "old" version V to a version >V+... Install on license. SIFLA9WRC7060*.EKB An upgrade may be required, for example, WINCC-V6 RC 256K PTg if you wish to increase the number of 512 ATg computers running an application. see more about upgrade keys Missing license key A license key that is required by the software but is not available in a "valid" form on the network is designated as a missing license key. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 36 EKB Installer 1.12.3 CAL license Question: If it is the license from Microsoft as the information on presence CAL of the license is entered into a computer-client, in fact on it there are no installations MS SQL Server, especially, ALM? In what k ind it is bought the CAL-license (is delivered)? The answer: The license for a paper. Accordingly, she is not entered neither into a computer, nor in ALM. 1.12.4 Installation of Trial keys For some programs it is possible to install temporary Trial keys for the term of from several o'clock about a year of work. A SITT*.EKB Trial License Key is installed from the CD. It can be activated via the actual SIMATIC application once for 14 days and is for evaluation purposes. You cannot restore or move the Trial License Key, but you can remove of Trial keys and their traces and reinitialize Trial key anew. During installation of a temporary key in catalogues Windows and Windows \System32 catalogues *attis with one empty file are created. Temporary key SITTA*.ekb is installed in catalogue C: \AX NF ZZ After the ending of term of work it is necessary to remove Trial keys and their traces. Otherwise problems are possible at work of normal keys. 1.12.4.1 Remove Trial keys (official) http://support.automation.siemens.com/WW/view/en/24200966 How can you deactivate the Trial License when the message appears indicating that the Trial License has expired, although the Floating License has been installed? Instructions: © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 37 Once activated the Trial License is valid for limited use up to a maximum of 14 days of the SIMATIC Software for tests, for example. If after expiry of this time you install a license for unlimited use (Single, Floating or Upgrade License) and after installation you still receive the message indicating that the Trial License has expired, we recommend deleting the Trial License in the "AX NF ZZ" folder. Procedure for deleting a Trial License 1. Open the ALM in MS Windows via "Start > SIMATIC > License Management > Automation License Manager" and mark the drive (e.g. "C") on which your licenses are installed. Displayed in the right window of the Automation License Manager is the table of the licenses installed. For viewing the licenses you need the file name (License Key) and the 20-digit license number. If these columns are not yet displayed, then via "View > Define..." you open the "Define View" dialog. In the bottom section of this dialog you select the "Columns" tab and then "License key" and "License number". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 38 EKB Installer Fig. 01 Then you enter a name under "Edit view" and click the "Apply" button. Acknowledge with OK and the "License key" and "License number" columns appear in the Automation License Manager. 2. In the Explorer you mark the "AX NF ZZ" directory on your hard disk or on drive "C", so that the file names of the licenses are displayed in the right window of the Explorer. If the "AX NF ZZ" directory or the files in that directory are not visible, then open the dialog "Tools > Folder options..." and select the "View" tab: Here you deactivate the option "Hide protected operating files (Recommended)" and Activate the option "Show hidden files and folders". Then click on the "Apply" button and acknowledge with "OK". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 39 Fig. 02 The "AX NF ZZ" directory is then displayed in the Explorer. 3 Now in the Automation License Manager compare the file name (License Key) of the Trial License with the file name in the "AX NF ZZ" folder. Via the view set in the Automation License Manager you determine the file name for the Trial License to be deleted (Fig. 03) that you then find in the "AX NF ZZ" folder. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 40 EKB Installer Fig. 03 4 Mark the Trial License found in the "AX NF ZZ" directory and right-click. Then select "Delete" in the pop-up menu that opens. After deletion the message described above will no longer appear. But need also: Removal of Trial keys and their traces 1.12.4.2 Removal of Trial keys and their traces After the ending of term of work it is necessary to remove Trial keys and their traces *attis in folders Windows и Windows\System32 or Windows\Sysnative Otherwise problems are possible at work of normal keys. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English After removal of Trial keys and their traces in C:\Windows, C:\Windows\System32 or C: \Windows\Sysnative (for W7 x64) it is possible to install Trial keys again See also: How can you deactivate the Trial License © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 41 42 1.13 EKB Installer Check of keys after installation After installation of keys it is required to lead procedure of check of a key in program ALM. Otherwise in some cases at start of the program you can see the warning of absence of a key which you have just installed. 1.14 License Number License Number The license number is the unique identifier of a license. There are 2 lines for input of serial numbers, so-called ID KHE, usually specified on yellow license diskettes and applied certificates. 10 symbolical number is intended for short keys. 20 symbolical number is intended for long keys. You can not change these numbers, and give it to make to the program or select one of the available serial numbers of installed keys in the drop-down list box. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 1.15 43 Select disk Storage Location for License Keys You can store license keys on storage media such as license key diskettes (for authorizations, on authorization diskettes) or on removable drives (but not on CD, CDRW) or USB memory sticks. License keys can be located locally on your own computer as well as on a network computer. Drive (hard disk, floppy drive, USB memory stick) on a computer (My Computer or network computer) where a license key is or can be stored. Choose a disk for installation of keys by means of the dropping out list. In case of if during work it is inserted or the replaceable carrier{bearer} is taken out (for example USB Flash) it is required to press on the button " To update the list " © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 44 EKB Installer After that in the list the current set of disks will be displayed. There are restrictions of programs of authorization AuthorsW and ALM. Short keys cannot be transferred{carried} on the replaceable carrier and to install from it. 1.16 Yellow disk As from STEP 7 V5.4 SP2 the license is supplied on a USB stick. The button of a call of a window for work with images of Yellow diskettes © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 45 By means of this utility it is possible to create Yellow a diskette from images of several types: IMA, IMZ* - WinImage IMG - FloppyImage BIN - FDA (Floppy Disk Analyzator for DOS) *Compressed images in format IMZ (WinImage) should be unpacked preliminary in a file with expansion IMA. On end of record the "license" path will be formatted. At the moment Siemens for this purpose uses tracks from 71 up to 79. If you have already created Yellow a diskette in other program (in the same WinImage or FloppyImage), That you can format separately separately a "license" path, having pressed on a corresponding cell. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 46 EKB Installer Correctness of creation of a diskette can be checked up in the program of authorization AutorsW or ALM, Having chosen check of integrity of any key. On characteristic "gnash" of the step-by-step engine of moving of a head it is possible to define {determine} also about success of procedure. If you will not hear "gnash" - the diskette means was created incorrectly or the necessary path has not been formatted. In this case can format consistently paths from 71 up to 79 and check in integrity in ALM. For reading firm Yellow diskettes in a file-image can use the button " Read Yellow Disk " or consider {count} through program WinImage. At attempt of reading of "license" path WinImage will give out the prevention{warning} of a mistake{an error} of reading. Press button " Ignore " for continuation of creation of an image. Can remember number of this path for formatting in our program. If the error of reading has occured in the beginning or the middle firm diskettes then this a diskette has already started to become unfit for use. Diskettes written down by program FDA contain many paths wrongly formatted non-standardly - also ignore these errors. Not leaving from WinImage you can just write down the received image on duplicating a diskette and then to format a "license" path in our program. For some programs (in particular WinCC and WebNavigator) from a diskette it is possible to install only SISLA keys. On what that to reason SIFLA* keys are ignored at installation - their names are rigidly hammered in Setup. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 1.17 Yellow Flash and Clone Video How to clone a USB stick https://www.youtube.com/watch?v=bdJoEpY2TpQ © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 47 48 EKB Installer As from STEP 7 V5.4 SP2 the license is supplied on a USB stick. At use of program ALM began possible{probable} to apply as the carrier of long keys Flash memory. You can transfer long keys on Flash memory and by means of program WinImage to make an image of this Flash, and then to restore all keys from this image Flash memory of any type and the size. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 1.18 49 ALM The Automation License Manager is a product of Siemens AG Automation & Drives Group. It is used to manage license keys (the technical form of licenses). Software products requiring a license key automatically report this requirement to the Automation License Manager. When the Automation License Manager finds a valid license key for this software, the software can be used in conformity with the end user license agreement. It is developed in connection with release of version ALM 3.0 - the Authorization Licenses Manager after whom, so-called, "fastcopy" long keys of authorization have ceased to work because of their ignoring by this Authorizator. "Fastcopy" keys could be copied simply in the directory of licenses C: \AX NF ZZ. They used auxiliary "hole" in system of authorization ALM <v3.0 which have been covered with output Step7 v5.4 SP1. Also additional coding the keys, therefore new keys have been applied are not visible in ALM v2.2. New keys are not visible in ALM v1 and v2. 1.19 transferring a license key to a PC without floppy disk drive What options are there for transferring a license key to a PC without floppy disk drive? Configuration Notes: For some time now computers have been produced without a floppy disk drive. However, in order to install certain automation software products you need a floppy disk drive to install the license keys supplied on floppy disk. Using the Automation License Manager you can install the licenses on a PC without floppy disk drive as follows. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 50 EKB Installer License Key Type Authoriza License Key tion (e.g. Floating License (e.g. STEP 7 Key STEP 7 V5.3) V5.2) Transport Medium External floppy disk drive with USB interface X X USB stick as transfer medium from one computer with floppy disk drive to a computer without floppy disk drive -- X Second computer with floppy disk drive in the company network 1) X and transfer via the network X1) Second computer with floppy disk drive and offline transfer (see Help of the Automation License Manager) X1) 1) X1) The Automation License Manager must also be installed on both computers. Note: You can recognize a License Key in the Automation License Manager by the twenty-digit license number. An authorization has a ten-digit license number. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 1.20 Multikey 1.21 Problems 51 List index out of bounds Problems with ALM v3.0 HF3 Problems with WinCC Problems with WinCC Archive v6.2 Problems with PCS7 v7 I need SIUPA9WRC5--3 POWERPACK (upgrade) KEY ? 1.21.1 key_for_PCS7_v8.0 Part of the key branches in PCS7 v8.0 another part can be taken from branches WinCC v7.0 In v8.0 improved diagnosis, associated with the keys - so you probably will be easier to find the missing keys © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 52 EKB Installer After installation of the key need testing of keys in the ALM and restart WinCC 1.21.2 PCS7 v8.0 and key9999 SIFLP7OSRE0800 + SIFCYP7ORT9999* bundle key "SIFLP7OSRE0800" "OS Server Redundancy" include keys: "SIFLP7REDU0800" "OS Redundancy" "SIFLP7SERB0800" "OS Server Basic" "SIFLP7SISB0800" "OS Single Station Basic" © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 53 SIFLP7OSES0800 + SIFLP7OSES0800 bundle key "SIFLP7ASES0800" "AS Engineering" bundle key "SIFLP7OSES0800" "OS include keys: Engineering" include keys: "SIFLA171040505" "Step 7 5.5" "SIFLP7OSEB0800" "OS Engineering Basic" SIFLA1CFCU0800" "CFC unlimited 8.0" "SIFLP7REDU0800" "OS Redundancy" "SIFLA1DOCP0504" "DocPro5.4" "SIFLP7SERB0800" "OS Server Basic" "SIFLA1SCL_0503" "SCL 5.3" "SIFLA1SFC_0800" "SFC 8.0" "SIFLA1THPO0800" "TH-PO 8.0" © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 54 EKB Installer © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 1.21.3 License concept PCS 7 V7 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 55 56 EKB Installer 1.21.4 Problems with PCS7 v7 You can try use these keys for PCS7 v7.0 (SP1) when you run OS WinCC from PCS7 you required WCP RC PO key when you run OS WinCC from WinCC you required WRC RC key PO = Power Objects = Tags for WinCC Process Control System PCS 7 V7.0 SP1 PC Configuration and Authorization https://support.automation.siemens.com/WW/llisapi.dll/csfetch/27002558/ps7pck_b_en-US.pdf 1.21.5 New keys Keys for some new Simatic programs will appear in the list only after installation of these Simatic programs on your computer. For example - new key for new version of Teleservice Ключи для некоторых новых программ появятся в списке только после инсталляции этих программ на ваш компьютер. Но для некоторых новых ключей возможно фантомное дублирование в списке новых несмотря на то, что они уже есть в обычном списке - это связано с новой методикой имениобразования тэговых ключей для последних версий программ. 1.21.6 List index out of bounds Problem: When run the application in my computer come out error window. In another computer computer the application running correctly. This are the print screen of the error. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 57 I had the same problem as the one described on your web page. Access violation at address 004BDF4E in module 'Sim_EKB_Install_2007_11_27.exe'. Read of address 00000000 I have a laptop with only one harddrive no floppydrive. When I start the program it makes the "access violation" error, when I then add an usb drive the program can start. It seems like the program wants to select disk number 2 in the dropdown box, it would normaly be the "c" drive but only if you have a floppy drive installed. I also have a laptop with only one harddrive no floppydrive, buty I divide a disk into 2 partitions C:\ and D:\. Therefore I do not see similar errors © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 58 EKB Installer "in Russian" Эта проблема проявляется на нотебуках без гибкого дисковода и с жёстким диском только с одним разделом. Так как у меня тоже есть нотебук без дисковода, но жёсткий диск всегда поделён на несколько разделов, то я этой ошибки не замечал. 1.21.7 Problems with ALM v3.0 HF3 On some computers right after installations of updating of program ALM 3 HF3 (from Step7 v5.4 SP2) can arise problems with working capacity of original and not original keys. The reason of an error while is unknown. Method of the decision of a problem. 1. Reload a computer. 2. Check up keys through program ALM. 3. Try to reinstall program ALM. 4. Reinstall keys. 5. Deinstall the new version of the program and install previous version ALM 3 HF1. 1.21.8 Problems with ALM v5.0 v2010.05.09 ! all previous versions may fail if the drive installed the new version of the ALM v5 keys ! error will be corrected in future versions Because of the new release ALM v5 may be many intermediate versions as far as finding new challenges. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 59 1.21.9 BATCH Calculating the units for the BATCH station License key for BATCH station A defined number of units can be operated and monitored with this license key. The number of units that can be processed depends on the utilization of the BATCH server. Example: BATCH Server (20) The license key for BATCH server is adequate for configuring up to 20 units. Requirement ? SIMATIC Manager is open. Procedure 1. In the SIMATIC Manager, select the multiproject/project for which you want to calculate the number of configured units. 2. Select the menu command Options > SIMATIC BATCH.. .The "Configure BATCH Process Cell" dialog box opens. 3. Select the "BATCH Process Cell" folder in the tree view. 4. In the "Process Cell" section, click "Check validity". 5. In the "Log" group, enable the "Validate" check box. 6. Click the "Display" button. Result A log file opens in the Internet Explorer. ? If the "Check validity" or "Compile" function shows an error in the configuration, you will need to correct the error and calculate the process objects again. ? If the configuration is free of errors, you will find the number of units configured in the multiproject/ project in the table under the heading "Units". ? You can calculate the number of configurable units based on the license keys through the Automation License Manager. Example of the layout of a log file: © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 60 EKB Installer Plant Units Log Date, time Result <process cell name> 11 Plausibility <date, time> 0 errors, 0 warnings No. ID Error Warning Remedy 1.21.10 CFC: AS License key for engineering License key for the AS The required license key for all SIMATIC stations depends on the total number of process objects loaded and configured in a project (multiproject). When an AS is loaded, the loaded process objects are evaluated. The following procedure shows you how to calculate the number of process objects configured in a project. With a multiproject, you need to determine the number per project and add them together. The following applies as of PCS 7 V7.0 SP1: The number of process objects loaded into the AS is calculated and subtracted from the available process objects (countable license keys). You calculate the number of available (still to be loaded) process objects using the license key via the Automation License Manager or in SIMATIC Manager via the menu command Options > Charts > Process Objects Statistics. Display © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 61 The display of the number of licenses is based on the object selected in the SIMATIC Manager (multiproject, project, SIMATIC station). Requirement The SIMATIC Manager is open. Procedure 1. Select the multiproject in the component view. 2. Select the menu command Options > Charts > Process Objects Statistics. The "Process Objects Statistics" dialog box opens. Result The "Process Objects Statistics" dialog box shows the number of configured process objects, the existing license, and the process objects which are currently still available for the following system areas: ? Multiproject ? Project ? SIMATIC station AS License key for engineering Relevant process objects in the project are process objects that can be monitored with the OS. The license key for engineering provides the number of process objects that you can configure in the CFC as "process objects in the project". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 62 EKB Installer Procedure You can calculate the number of configured process objects as follows: 1. Open any chart in CFC. 2. Select the menu command Options > Chart Reference Data. The "Chart Reference Data" dialog box opens. 3. Select the menu command View > Statistics. Result You will find the number of "Process objects (PO) [x]" and the scale of the license key in the "process objects in the project" path. The following figure shows an example. 1.21.11 Route Control Calculating the routes for the route control station License key for route control station For the process mode of SIMATIC Route Control, the number of active routes (material transports) is relevant and not the number of configured routes. The number of routes active in process mode is based on the process. Long name License name SIFLA7RCS30700 Route Control Server 300 simultaneous SIFLA7RCS20700 Route Control Server (100) SIFLA7RCS10700 Route Control Server 30 simultaneous SIFLA7RCEN0700 Route Control Engineering SIFLA7RCCX0700 Route Control Center Example: Route Control Server (300) This is the license key for a route control server in which 300 routes can be simultaneously active in process mode. Determining the route license The status bar of the Route Control Center shows how many routes were active simultaneously after a restart of the route control server. License key too small – server license key is installed Note If the route control server detects a license key for 30, 100 or 300 routes during startup, the maximum number of simultaneous material transports will be limited to this value. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 63 If the server then receives a 31st, 101st or 301st route request, the Route Control Center reports that the license key is missing or that the limit has been exceeded. The route control server continues to operate. License key too small – server license key is not installed If no license key is installed on the route control server, the server is limited to a maximum of 300 routes (maximum limit). Since information about the actual size of the system is lacking on the route control server, it makes an estimate on the safe side - you can continue to operate the system even when there is no license. The absence of a license is displayed in the Route Control Center. New license Restart the route control server after you have installed the license. 1.21.12 Problems with WinCC For some programs (in particular WinCC and WebNavigator) from a diskette it is possible to install only SISLA keys. On what that to reason SIFLA* keys are ignored at installation - their names are rigidly hammered in Setup. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 64 EKB Installer See LogFiles in C:\Program Files\SIEMENS\WINCC\Diagnose for example License.Log when License key A9WRC installed 02/01/2007 13:16:50 InitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | NameForMessageBox = | Name of License = SIFLA9WRC70600 | Text of License = WinCC RC (262144) | 02/01/2007 13:16:50 InitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | NameForMessageBox = | Name of License = SIFLA9WRC70600 | Text of License = WinCC RC (262144) | 02/01/2007 13:17:07 InitLicense RT | AppName = OptRT:CHIPCARD | CycleCheck = no | NameForMessageBox = | Name of License = SIFLA1WPC40600 | Text of License = WinCC Chipcard | 02/01/2007 13:17:07 ExitLicense RT | AppName = OptRT:CHIPCARD | CycleCheck = no | Name of License = SIFLA1WPC40600 | Text of License = WinCC Chipcard | 02/01/2007 13:17:08 InitLicense CS | AppName = AppCS:TlgASO | CycleCheck = yes | NameForMessageBox = | Name of License = SIFLA9WTG30600 | Text of License = WINCC Archive (30000) | 02/01/2007 13:18:48 InitLicense xx | AppName = ConnectivityPack | CycleCheck = no | NameForMessageBox = | Name of License = SIFLA9WOP10600 | Text of License = WinCC Connectivity Pack | 02/01/2007 13:18:48 ExitLicense xx | AppName = ConnectivityPack | CycleCheck = no | Name of License = SIFLA9WOP10600 | Text of License = WinCC Connectivity Pack | 02/01/2007 13:30:15 ExitLicense CS | AppName = AppCS:TlgASO | CycleCheck = yes | Name of License = SIFLA9WTG30600 | Text of License = WINCC Archive (30000) | 02/01/2007 13:30:17 ExitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | Name of License = SIFLA9WRC70600 | Text of License = WinCC RC (262144) | 02/01/2007 13:30:17 ExitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | Name of License = SIFLA9WRC70600 | Text of License = WinCC RC (262144) | Example when installed 2 License key A9WRC. Low key with 128 tags block High key with 65536 tags © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 65 Example License.Log when installed 2 License key A9WRC. 02/01/2007 14:39:29 InitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | NameForMessageBox = | Name of License = SIFLA9WRC10600 | Text of License = WinCC RC (128) | 02/01/2007 14:39:29 InitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | NameForMessageBox = | Name of License = SIFLA9WRC10600 | Text of License = WinCC RC (128) | ..... You need use only one key with max Tags Example License.Log when License key A9WRC not installed for example Authorinformation.inf when License key A9WRC* not installed License installed needed to install Product SI--A9WRC?---No Yes Yes Simatic WinCC RC (Runtime + Development) SIFLA9WSN40600 Yes Yes No WebNavigator 50 Clients © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 66 EKB Installer SIFLA9WOP10601 Yes SIFLA9WSPA0600 Yes No No No No WinCC Option Connectivity Pack ProAgent WinCC and part of License.Log when License key A9WRC* not installed 02/01/2007 14:10:20 Control Center - Demo Mode ConfigurationSystem enabled 02/01/2007 14:10:20 NoLicense CS | Name of License = A9WRC?0600 | Text of License = Simatic WinCC RC (Runtime + Development) | Exists = No | 02/01/2007 14:10:20 InitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | NameForMessageBox = | Name of License = A9WRC?0600 | Text of License = Simatic WinCC RC (Runtime + Development) | 02/01/2007 14:10:22 NoLicense ED | Name of License = A9WRC?0600 | Text of License = Simatic WinCC RC (Runtime + Development) | Exists = No | 02/01/2007 14:10:22 Control Center - Demo Mode Editors enabled 02/01/2007 14:10:22 InitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | NameForMessageBox = | Name of License = A9WRC?0600 | Text of License = Simatic WinCC RC (Runtime + Development) | ..... 1.21.13 WinCC: the number of process objects If you have executed the "Compile OS" function in SIMATIC Manager, you can determine the number of configured process objects in the WinCC Explorer: Determining the number of process objects 1. Select the OS in the WinCC Explorer: The number of configured process objects is displayed at the bottom right of the dialog box. The screenshot below shows an example with "578 process objects". Insufficient license key If you open a project with an insufficient number of configurable process objects, the OS program switches to demo mode automatically. If an RT/RC license key is present, the maximum number of configurable process objects is always permissible on a client, as the number of configurable process objects is only checked on a server. Long name License name Version SIFLA9WRC90700 WinCC RT PO (unlimited) v7.0 SIFLA9WRC80700 WinCC RT PO (20000) v7.0 SIFLA9WRC70700 WinCC RT PO (10000) v7.0 SIFLA9WRC60700 WinCC RT PO (8500) v7.0 SIFLA9WRC50700 WinCC RT PO (5000) v7.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English SIFLA9WRC40700 WinCC RT PO (3000) v7.0 SIFLA9WRC30700 WinCC RT PO (2000) v7.0 SIFLA9WRC20700 WinCC RT PO (1000) v7.0 SIFLA9WRC10700 WinCC RT PO (250) v7.0 SIFLA9WRC00700 WinCC RT PO Client v7.0 67 1.21.14 WinCC: the number of archive values License key for archive v alues This license key allows you to archive a defined number of archive values with the operator station. The basic package is supplied with a license key for 512 archive values. The license key required for archiving archive values in the OS project depends on the number of values configured for archiving. Open the "Tag Logging" editor in the WinCC Explorer. The number of configured archive values is displayed at the bottom right of the dialog box. The screenshot below shows an example with 129 of 10,000 authorized archive values. E x am p l e: W INCC Us er A rc hives (10000) This license key enables you to increase the number of archive values which can be configured for the archive server to 10000 (max. 30000) Insufficient license key If you open a project with an insufficient number of configurable process objects, the OS program switches to demo mode automatically. If an RT/RC license key is present, the maximum number of configurable process objects is always permissible on a client, as the number of configurable process objects is only checked on a server. Short name Long name License name Version 977 A9WARC70 SIFLA9WARC0700 WINCC User Archives v7.0 978 Y9WTG670 SIFCY9WTGX07006 WINCC-V7 Arch 80000 ATg v7.0 979 Y9WTG570 SIFCY9WTGX07005 WINCC-V7 Arch 10000 ATg v7.0 980 Y9WTG470 SIFCY9WTGX07004 WINCC-V7 Arch 4G ATg UNLIM v7.0 981 Y9WTG370 SIFCY9WTGX07003 WINCC-V7 Arch 30000 ATg v7.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 68 EKB Installer 982 Y9WTG270 SIFCY9WTGX07002 WINCC-V7 Arch 5000 ATg v7.0 983 Y9WTG170 SIFCY9WTGX07001 WINCC-V7 Arch 1500 ATg v7.0 1024 Y9WTG770 SIFCY9WTGX07007 WINCC-V7 Arch 120000 ATg v7.0 1.21.15 WinCC CAS Calculating the process objects for the central archive server The archive values of all OS servers in a PCS 7 plant are archived on a central archive server. The sum of the archive values of all OS servers gives the number of licensed archive values. License keys for the central archive server The following license keys are required for the central archive server: ? License key for operating an OS client: SIFLA9WRP00602 WinCC RT PO Client ; SIFLA9WCP70700 WINCC-V7 RC PO (10000) ? License key for the "StoragePlus" software package: SIFLA1STOP0102 StoragePlus ? To use the central archive server: SIFLA9WSEC0700 WinCC Server ? To use the archives: SIFCY9WTGX07005 WINCC-V7 Arch 10000 ATg; SIFLA9WARC0700 WinCC Archive ? To view archived data: SIFLA9WVC20707 WinCC DataMonitor 10 Clients Determining the number of archive values on an OS server 1. Open the "Tag Logging" editor in the WinCC Explorer. The number of configured archive values is displayed at the bottom right of the dialog box. The screenshot below shows an example with 129 of 10,000 authorized archive values. 2. Determine the number of archive values of all OS servers. If redundant OS servers are used, the number of archive values must be doubled. 1.21.16 WinCC Maintenance station Calculating the asset tags (hardware components) for the maintenance station License key for WinCC Maintenance station The license type of these license keys is "Count relevant license" SIFCYMAINR0700*. Short name Long name License name Version 739 MAINES70 SIFLMAINES0700 Maintenance ES V7.0 v7.0 740 YMAINR70 SIFLYMAINR0700 Maintenance RT V7.0 (unlimited) v7.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 741 YMAINR71 SIFCYMAINR0700 1 Maintenance RT V7.0 (10) v7.0 742 YMAINR74 SIFCYMAINR0700 4 Maintenance RT V7.0 (100) v7.0 1107 YMAINR75 SIFCYMAINR0700 5 Maintenance RT V7.0 (250) v7.0 767 YMAINR76 SIFCYMAINR0700 6 Maintenance RT V7.0 (500) v7.0 743 YMAINR77 SIFCYMAINR0700 7 Maintenance RT V7.0 (1000) v7.0 69 The licensed scope is added together when several license keys are installed. ? This license key allows you to monitor a defined number of diagnostic objects (asset tags). Ex ample: SIFCYMAINR07004 Maintenance RT (100) This license key is sufficient for diagnosing up to 100 hardware components with a maintenance station. If you have 3 Maintenance RT (100) license keys (with difference serial numbers !) on a maintenance station, you will be able to diagnose up to 300 (100+100+100) hardware components. Components with diagnostics capability The following components with diagnostics capability are classed as asset tags within a PCS 7 project: ? PC stations ? Network components with diagnostics capability (e.g., switches) ? Automation systems (CPU) ? Distributed I/O (ET 200 station) ? Field devices with diagnostics capability Requirement SIMATIC Manager is open. Procedure 1. Select the multiproject in the plant view. 2. Select the menu command Options > Plant Hierarchy > Configured Objects. The "Configured Objects" dialog box opens. Result The "Configured Objects" dialog box displays the number of configured diagnostic objects (asset tags). © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 70 EKB Installer 1.21.17 WinCC Demo mode Q: I have all keys, but WinCC wrote "Demo mode" You need install ONLY 1 RC key. In this time only low 128 Tags key is worked - others keys is banned !!! © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 71 remove another RC keys to floppy Q: Thank you, I did not know that. It works good now 1.21.18 Problems with WinCC Archive v6.2 New for Archive Licenses For archive licenses, the new license type "Count-Relevant" is being introduced starting with WinCC V6.2. It enables a much finer stacking of the licenses. If, for example, a WinCC project uses a license for 1500 archive tags as well as a license for 5000 archive tags, then a total of 6500 archive tags are available on this computer. On the other hand, the 512 free archive tags included in the delivery scope of the basic packages are not added up. For using more 512 Archive Tags is required SIFCY9WTGX0600* WinCC Archive v6.2 Select> Short name Long name License name Version 622 A9WARC62 SIFLA9WARC0602 WINCC User Archives v6.2 623 Y9WTG662 SIFCY9WTGX06026 WINCC-V6 Arch 80000 ATg v6.2 624 Y9WTG562 SIFCY9WTGX06025 WINCC-V6 Arch 10000 ATg v6.2 625 Y9WTG462 SIFCY9WTGX06024 WINCC-V6 Arch 4G ATg UNLIM v6.2 626 Y9WTG362 SIFCY9WTGX06023 WINCC-V6 Arch 30000 ATg v6.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 72 EKB Installer 627 Y9WTG262 SIFCY9WTGX06022 WINCC-V6 Arch 5000 ATg v6.2 1.21.19 I need SIUPA9WRC5--3 POWERPACK (upgrade) KEY ? I need SIUPA9WRC5...3 UPGRADE WinCC runtime +conf. 1024-8k powerpack license key No need wait SIUP* key. I don't support Upgrade keys - in it there is no necessity. Install on SIFLA9WRC7060*.EKB WINCC-V6 RC 256K PTg 512 ATg You can install normal long key SIFLA9WRC60*00.EKB (max 256K) from YELLOW FLASH or Yellow Disk SIFLA9WRC60*00.IMA Do not forget remove old key on smaller number of tags - differently it can to not give access to more powerful key. Keys for updating the license consist of two keys *.EKB and *.UPG. Example of a diskette for updating the version of the program. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 English 1.21.20 Program required key after installation of key Before first start of SmartLabel need check installed key in ALM. This is bug of SmartLabel and other Simatic programs. 1.21.21 About EKBBackup CRC Error About EKBBackup CRC Error This EKBBackup option is false - EKB_Install key haven't CRC error This EKBBackup version also have "Fix CRC" ERROR After this "Fix" I can't move "fixed" key to other disc. EKBBackup 1.0.1.38 ALM wrote after fix ALM show result after moving "fixed" keys - all moved keys inactive Other Key programs (based on Fubrus souce) also haves this bug for example this © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 73 74 EKB Installer © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Top Level Intro This page is printed before a new top-level chapter starts Part II 76 2 EKB Installer Russian Оригинальные версии только на сайте http://plcforum.uz.ua/ - некоторые жулики начали распространять подделки с чёрными ходами и вирусами - проверяйте контрольную сумму MD5 Видео как использовать https://www.youtube.com/watch?v=SpR165EPMBY Видео как клонировать флешку 15/03/2010 closed by hoster http://plc.net.ru - today (2012) is FALSE site - name of the website plc.net.ru is stolen from us 19/03/2010 reopened forum with links http://www.plcforum.uz.ua torrent http://rutracker.org/forum/viewforum.php?f=1192 Данная программа не предназначена для использовании на работе - в век Стукнета/Куку/ Флейм,WannaCrypt, никому доверять нельзя и под личиной этой программы вам могут подсунуть зловреда. Иногда мне кажется, что я создал монстра - не ставьте эти ключи на промышленные объекты ! Ключи 9999 для теговых лицензий PCS7 v8.0, WinCC, Flexible, TIA Portal Проблемы в том числе в связи с выходом ALM v5 Simatic IT Business Objects Enterprise signed keys Официальный FAQ (на английском) FastCopy keys v3.0 2739 keys v2017.08.25 add info for Sinema Server v14, Simotion Scout v5.1 6a3276e48041a9fb1ead510e94246245 *Sim_EKB_Install_2017_08_25.exe v2017.08.11 internal for testing Sinema Server v2017.08.10 Добавлена информация для Braumat, PCS7 v9.0 9df5c73893fa0ee7c5c0c7c4df07f0f5 *Sim_EKB_Install_2017_08_10.exe v2017.08.09 внутренняя для тестирования Braumat, PCS7 v9.0 9518ba050d1c52f3b89746b952881aac *Sim_EKB_Install_2017_08_09.exe v2017.08.05 внутренняя для тестирования Braumat v7.1, PCS7 v9.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 9d0080d82d02ea9dbde0322db65ba09d *Sim_EKB_Install_2017_08_05.exe 07.** - подделка от ЦРУ / подделка от румынских цыган v2017.06.23 Добавлена информация для WinCC PerformanceMonitor, Sinumerik 961e886a4d0a7f1f99dc80582b12ab4a *Sim_EKB_Install_2017_06_23.exe v2017.06.03 Добавлена информация для Step7 v5.6 d94894697bcba56949fcf47590b8746f *Sim_EKB_Install_2017_06_03.exe v2017.04.13 внутренняя для тестирования 2017.04.03 - подделка от ЦРУ / подделка от румынских цыган v2017.04.01 add some info for TIA, 80K RT Flexible 2008, Sinaut and optimized some keyset 75c14222a978ec85be055decd8fbee6d *Sim_EKB_Install_2017_04_01.exe v2017.01.17 add some info for Panel 8d672a831dce6250d8feafe04f361557 *Sim_EKB_Install_2017_01_17.exe v2017.01.14 add some info for IS PCS7 949ea884cc9b4f41a234c7e4e2883556 *Sim_EKB_Install_2017_01_14.exe v2016.11.28 add one info for SoftStarter and Simocode 14 3af2df6969bd421718a2be9be3cb14cf *Sim_EKB_Install_2016_11_28.exe v2016.11.25 add one info for TIA Portal 57b9f7b47daf28f6f0caf1caa5e8cebc *Sim_EKB_Install_2016_11_25.exe v2016.11.11 add one info for SICAM 2f596982e0857a6addc0fce8ad5354d2 *Sim_EKB_Install_2016_11_11.exe v2016.10.26 add one info for TIA Portal v14 191d03600f175d7697c9dabafc1925b6 *Sim_EKB_Install_2016_10_26.exe v2016.10.11 add one info for TIA Portal v14 58d7b14c9dc7af6c7515296d9baac1c3 *Sim_EKB_2016_10_11_TIA14.exe v2016.10.10 add some info for TIA Portal v14 bed8861d03f384e411e53b05cb999f48 *Sim_EKB_Install_2016_10_10_TIA14.exe v2016.09.06 add some info for WinCC TeleControl 0317bb0bf48251acab72dab273411860 *Sim_EKB_Install_2016_09_06_TC.exe v2016.08.16 internal for testing v2016.07.16 add some info for WinCC WebNavigator v7.4 e190b1c240fe0908c2fc6085bbec413c *Sim_EKB_Install_2016_07_16.exe v2016.05.30 add some info for PCS7 v8.2 950187a0303ab55fb99d30eb46f006f3 *Sim_EKB_Install_2016_05_30_DM.exe v2016.05.06 add some info for PCS7 v8.2 35e7872a5adf9e769ad06ec4151f1947 *Sim_EKB_Install_2016_05_06.exe v2016.04.25 add some info for WinCC v7.4, PCS7 v8.2, TIA Portal v14 89e4224d5710ee2f1d656e5d3ea2c5c5 *Sim_EKB_2016_04_25_WinCC.exe v2016.04.12 internal for testing v2016.03.12 add some info for Sinutrain v4.7 bbda2902d765225085a378d0d3b78632 *Sim_EKB_Install_2016_03_12_Sinutrain.exe private for testing v2015.11.24 add some info for Braumat v7.0, PDM v9.0 b34930d7d8f0dabf8f8e269aa89aa422 *Sim_EKB_Install_2015_11_14_Bramaut.exe private for testing v2015.10.22 add some info for PCS7 8.1 SMART station 96440b85e6646e1722ac0387a17f37e3 *Sim_EKB_Install_2015_10_22.exe v2015.10.21 add some info for SinuTrain v4.7 eee5018351d5d99606c00b41a9df2f0c *Sim_EKB_Install_2015_10_21.exe v2015.10.14 add some info for Audit v7.3 d767bea8610dc49141f57730853c7743 *Sim_EKB_Install_2015_10_14.exe v2015.09.04 add some info for Software CPU 1507S //MD5: 589b2b79d3f67007e2ef613b81e411f6 *Sim_EKB_Install_2015_09_04.exe v2015.08.31 add some info for Safety ES v1.0, Software CPU 1500S //MD5: © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 77 78 EKB Installer 7938f4a9c3976c12566ebad1ea7da9bf *Sim_EKB_2015_08_31.exe 04.08 is romanian gypsy fake !!! plc.myforum.ro distribute dangerous fakes !!! v2015.03.29 add some info for NET v13 //MD5: 542e0e7697460598cec371f5160b62be v2015.02.10 add some info for Simocode v13 //MD5: 7d5f0a35915f39e0009635f750630adb v2015.02.01 add some info for Cemat v8.0 //MD5: f4bea40978b125de557fa43845e8377e v2014.12.27 add some info for Cemat v8.0 //MD5: c3d7b48a5c0c86a8cdcf4f8d64e29bab v2014.11.11 add some info for PCS7 v8.1 //MD5: e8ad4a811d8a76ca39ff0ef12248e12f v2014.11.09 add some info for PCS7 v8.1 //MD5: 50923874052344ddcf031a6a036a224f v2014.10.02 add some info for PCS7 v8.1 //MD5: 858cbee929bec0a41eb7f94391ce13f7 09.19 is romanian gypsy fake !!! distribute dangerous fakes !!! v2014.09.13 add some info for SinuTrain v4.5 //MD5: 8a788f25118e84f9f5a6cef6de486fff v2014.09.13 add some info for Simatic WinCC v7.3/v13, Scout v4.4 //MD5: 91079d468dd72fa0e5a47f556e750539 v2014.08.05 test for Scout v4.4 //MD5: 029d67e86ba859f2cc584c0076420a68 08.01 is romanian gypsy fake !!! distribute dangerous fakes !!! v2014.07.28 add some info //MD5: 50659cf2c2f972460692ca7ce9461d1d v2014.03.08 add some info //MD5: f40d1b432f529f53002d9514e7a3bf1b v2013.12.25 add some info for Simatic Net v12 //MD5: 0ade8808e789e6e704e66b0877c1c04f *Sim_EKB_Install_2013_12_25.exe v2013.12.10 add some info for Simocode v12 // MD5: 10a0c74548ba89b80e98f2664289ba79 v2013.12.02 add some info for PDM v8.1 v2013.12.01 add some info for Softnet Security Client v4.0 v2013.05.26 Добавлена информация для WinCC v7.2 v2013.03.08 исправлен 1 ключ для TIA Portal v12 v2013.03.03 Добавлена информация для TIA Portal v12, S7-Technology, Unicode ошибка для папки Новые ключи исправлена v2013.03.01_test Тестовая временная Добавлена информация для TIA Portal v12, с обнаруженной ошибкой для предыдущ их Unicode версий начиная с v2012.10.12 v2013.01.21 Исправлена описка для PID v11.0, Добавлена информация для D7-SYS v8.0 v2012.10.12 Добавлен китайский интерфейс v2012.09.29 Добавлена информация для Easy Motion v11.0, SinuTrain 4.4 v2012.07.29 Добавлена информация для PID v11.0, но как выяснилось - с опиской v2012.07.23 Добавлена информация для Simotion Scout v4.3 v2012.07.19 Добавлена информация для Telecontrol Server Basic v2.0 и исправлена ошибка комментария продукта v2012.07.18 Добавлена информация для PDM v6.1. 08/03/2012 Добавлена информация для PCS7 v8.0 26/02/2012 Добавлена информация для WinCC Flexible 2008 SP3, Simatic Net v8.1. Исправлен баг эвристика. 26/01/2012 Добавлена информация для Simatic Net v8.1 14/05/2011 Добавлена информация для тестирования TIA Portal V11 15/02/2011 Внутренняя версия 10/10/2010 add one info for "SIK/ SIMATIC S5 PMC IE V7.0" ("A9S5IE70") 09/09/2010 Добавлена информация для WinAC, исправлена ошибка, проявляющ аяся на компах и виртуальных машинах с одним разделом жёсткого диска 09/05/2010 Добавлена информация для WinCC Flexible 2008 SP2 options v1.3 (для тестирования), одна ошибка связанная с АЛМ 5 блокирована 05/05/2010 Добавлена информация для Sinaut 20/04/2010 Добавлена информация для Safety Matrix, PCS7 powerrate, PCS7 CFC AS RT SIFPZASRPX9999A 20/03/2010 Добавлены некоторые лицензии, опция Рекомендуемые и информация о закрытии PLC.NET.RU и открытии http://plcforum.uz.ua 26/08/2009 Добавлены лицензии для TIA Portal v10.5, Braumat, Maintenance Station 2009 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 79 04/04/2009 Добавлены лицензии для WinAC MP 2008, PCS7 v7.1 22/12/2008 Добавлены лицензии для WinAC 2008, Simatic Net 2008, RF-Manager 2008 20/08/2008 Добавлены лицензии для WinCC Flexible 2008 24/07/2008 Открыл опцию создания FastCopy ключей 21/07/2008 Добавлены лицензии для WinCC v7.0 29/06/2008 Добавлены лицензии для PID Tools v5.2, D7-SYS v7.0, PowerControl, RF-Manager 14/03/2008 Добавлены лицензии для Simatic IT и описание multikey 23/02/2008 Добавлены лицензии для CEMAT v7.0 , WinCC v6.2 and PCS7 v7.0 18/02/2008 Добавлены лицензии для Simocode 2007 15/02/2008 Добавлены лицензии для DocPro 5.4, WinAC MP, Soft Starter 2007 и вроде исправил ошибку установки ключей из папки "New" 07/12/2007 Добавлены лицензии для Sinema E 2006 and fix error for Motor Starter 2007 (но добавил ошибку - не устанавливались ключи из папки "New") 30/11/2007 Добавлены лицензии для Motor Starter 2007, Net 2007 27/11/2007 Добавлены лицензии дляSmartLabel v3.0 HF1, WinAC/RTX 2005 SP3 07/11/2007 Добавлены некоторые тэговые лицензии для WinCC v6.2 и PCS7 v7.0. В предыдущ их версиях имелись проблемы с некоторыми короткими лицензиями (WinAC, SmartLabel) При создании одноключевой жёлтой дискеты была ошибка в ключевом файле. В данной версии часть проблем решена. В далёкие, далёкие годы Сименс поручил разработку защ иты для своих программных продуктов фирме StopCopy. Та разработала защ иту на основе ключевых файлов, размещ аемых на особым образом отформатированной Жёлтой дискете - отсюда и название. При этом утверждалось, что защ ита до того надёжна, что "будет надёжно оберегать ваши инвестиции". Большое человеческое спасибо специалистам StopCopy за проделанную работу в области создания атмосферы доступности продуктов Сименса широким массам программистов. Это сделало программные и аппаратные решения очень популярными и востребованными по всему миру, что позволило достойно соперничать с другими производителями автоматики даже на их территории. Взять для примера США с и их B&R и General Electric... и соответственно действительно сберегло вложенные инвестиции. Ведь железо всё равно надо покупать у Сименса. Данная программа предназначена для установки ключей лицензий в случае , когда: наступил "чёрный день программиста" - система слетела вместе со всеми авторизациями, а работать надо, даже в труднодоступных районах; когда вышел новый горячий продукт, а денег на него начальство пока не даёт; просто хочешь изучить для общ его развития. Данная программа не предназначена для использовании на работе - в век Стукнета никому доверять нельзя и под личиной этой программы вам могут подсунуть зловреда. Разработана в связи с выпуском версии ALM 3.0 - Менеджера Авторизации Лицензий, после которого, так называемые, "быстрокопируемые v1" длинные ключи авторизации перестали работать из-за их игнорирования этим Авторизатором. "Быстрокопируемые" ключи можно просто копировать в каталог лицензий C:\AX NF ZZ. "Быстрокопируемые v1" использовали служебную "дырку" в системе авторизации ALM <v3.0, которая была прикрыта с выходом Step7 v5.4 SP1. "Быстрокопируемые v3" приживаются без проблем в АЛМ 3. Также было применено дополнительное кодирование ключей, поэтому новые ключи не видны в АЛМ 2.2. Новые ключи неправильно отображаются в старых версиях программ EKB_Rename, EKB_Backup, EKB_Install <v.2007.03.03. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 80 EKB Installer Я не призываю использовать софт Сименса в корыстных целях. Программы для производственных целей в принципе должны закладываться в сметы проектов и приобретаться на деньги заказчика. Мало кому придёт в голову поставить заказчику левую ПЦС7 с левыми ключами и без сертификата на крупное производство. А для домашнего использования наверное нет ничего хуже возни с лицензионными дискетами. Бывали случаи, когда заезженная фирменная Жёлтая лицензия начинала осыпаться у Интуриста с пропаданием ключей в далёкой глубинке без телефона и Интернета. 2.1 Введение В окне программы расположены: Дерево со списком программ и таблица со списком ключей Поле для вывода комментариев и справочной информации Строка выбора языка интерфейса Строка выбора диска для установки ключей и кнопка обновления списка дисков Строки ввода серийных номеров Строка и кнопка для поиска ключа по заданному слову Кнопка вызова окна для работы с образами Жёлтых дискет Поле выбора предпочтений типа лицензии при установке Кнопки инсталяции короткого, длинного или всех выбранных ключей *** © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 2.2 Мы установим ключи позже Во время установки программ Simatic отказываемся от установки ключей. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 81 82 2.3 EKB Installer Типы ключей Имеется 2 основных типа ключей: 1. короткие ключи старого образца до 2004 года 2a. длинные ключи нового образца 2004 года (ALM v1.*..2.*) 2б. длинные ключи нового образца 2006 года (ALM v3.*) Короткие ключи старого образца до 2004 года совместимы вверх с версией авторизатора лицензий ALM. Также для работы с этими ключами можно использовать старый авторизатор AuthorsW. При установке короткого файла на жёстком диске создаётся дополнительный служебный файл с расширением HRD. В паре с EKB файлом ключа они составляют установленную лицензию. Отсутствие HRD файла не позволяет перенести ключ на другой диск или вернуть на дискету и приводит к блокированию ключевого файла. Длинные ключи нового образца 2004 года совместимы только с версией авторизатора лицензий ALM. Для работы с этими ключами нельзя использовать старый авторизатор AuthorsW. Длинные ключи нового образца 2006 года совместимы только с версией авторизатора лицензий ALM 3 и выше . Новые ключи ALM v3.* неправильно отображаются в старых версиях программ EKB_Rename, EKB_Backup, EKB_Install <v.2007.03.03 и никак не отображаются в ALM v1..v2. Основные параметры и отличия © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian Короткие ключи S7PROF53.EKB 8 Длина имени файла, символов Формат имени файла короткое ДОС Размер файла, байт 1280 Серийный номер, символов 10 Метод шифрования Последовательное маскирование инкрементой маской Вспомогательный файл S7PROF53.HRD HRD Безлимитные типы Одноместная лицензий Ограниченные типы резервная на 14 дней лицензий Переносимость через USB невозмозно Флеш память Программа авторизации AuthorsW и ALM 83 Длинные ключи SIFLS7PROF0503.EKB >=14 длинное Windows 2560 20 Последовательное маскирование инкрементой маской с криптованием по Микрософту нет Плавающ ая сетевая SIFL*.EKB, одноместная SISL*.EKB Рентальные SIRT*.EKB - почасовые, многодневные. Триальные (пробные): - почасовые SIMF*.EKB - на 14 дней SITT*.EKB полнофункционально при инсталяции и перемещ ении через ALM только ALM Подробности об наименовании в английской ветке CAL лицензия 2.3.1 CAL license CAL лицензия http://www.automation-drives.ru/forum/viewtopic.php?t=6176 Q1. Вы пишете, что на сервере необходима инсталляция Connectivity Pack . Имеется в виду Connectivity Pack Server? Т.е. без него к данным тэглоггинга удаленно добраться будет нельзя? R1. Да. Connectivity Pack лицензирует следующ ие интерфейсы: WinCC OLE-DB Provider, OPC A&E, HDA, XML-DA. Добраться до данных технически может и можно (через OLE-DB), но это будет нелицензионно. Q2. Должен ли Connectivity Pack Client быть установленным на клиенте, для доступа к удаленному серверу, если там нет никакого ПО WinCC - ни базового ни дополнительного? R2. Да. Q3. Если это лицензия от Майкрософт, то как информация о наличии CAL лицензии вводится в компьютер-клиент, ведь на нем нет инсталляций ни MS SQL Server, ни, тем более, ALM? На этапе установки или конфигурирования чего-либо? В каком виде покупается(поставляется) CAL-лицензия? R3. Лицензия на бумаге. Соответственно, она не вводится ни в компьютер, ни в ALM. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 84 2.4 EKB Installer Выбор ключа Для выбора ключа нажмите на квадратик для галочки. Повторное нажатие отменит выбор. Для выбора всех ключей в текущ ем разделе нажмите в квадратик для галочки в первой строке. Повторное нажатие отменит выбор в текущ ем разделе. Для просмотра выбранных ключей встаньте в дереве продуктов на раздел "Выбранные ключи". В таблице будут отображены только выбранные ключи. 2.5 Поиск ключа Для поиска ключа введите в строку поиска слово или словосочетание*, которое может встретиться в имени файла или наименовании ключа. Нажмите на кнопку "Найти". Например для поиска ключей для Step7: введите слово Step или Step prof (регистр символов не важен) - часть наименования ключа. или введите слово s7prof - часть имени файла. В дереве продуктов отобразится строка "Найдено N "слов", а в таблице отобразиться список ключей соответствующ их заданному параметру поиска. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 2.6 85 Необходимые ключи Список минимально необходимых ключей для установленных программ. Это абсолютно не значит, что в список окончательный и "Я знаю все ваши фантазии..." некоторые программы требуют установку дополнительных ключей, не указанных в данном списке. Из тэговых ключей устанавливайте только один с необходимым количеством тэгов (пример для CFC на рисунке) Поставив галку Recommended можно оставить в списке только рекомендуемые к установке ключи - будут выводиться комплексные ключи и один из тэговых. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 86 EKB Installer Например, ключ для Профессиональной версии "поглощ ает" ключи для отдельных программ из этого комплекта - Step7 Basis, PLCSIM, SCL, Graph. 2.6.1 Рекомендуемые Поставив галку Рекомендуемые (Recommended) можно оставить в списке только рекомендуемые к установке ключи - будут выводиться комплексные ключи и один из тэговых. Например, ключ для Профессиональной версии "поглощ ает" ключи для отдельных программ из этого комплекта - Step7 Basis, PLCSIM, SCL, Graph. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 2.6.2 87 Недостающие ключи Имена недостающ их ключей вы можете уточнить в менеджере лицензий ALM 2.6.3 Комплексный ключ Комплексный ключ S7PROF* для профессиональной версии STEP7 может использоваться вместо 4-х отдельных ключей A17104*, A1PLC_*, A1S7GR*, A1SCL_*. SIFLS7PROF1100.EKB STEP 7 V11 Professional combo Комплексный ключ для использования обеих версий STEP7 Professional v5.5 и v11.0 на одном компьютере. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 88 EKB Installer SIFLA9XEP11100.EKB WinCC flexible Advanced combo Комплексный ключ для использования обеих версий WinCC flexible 2008 и WinCC Advanced v11.0 на одном компьютере. Ключ PCS7TT* для программы PCS7 может использоваться вместо целого комплекта ключей. Имена недостающ их дополнительных ключей вы можете уточнить в менеджере лицензий ALM 2.7 Установка ключа Вы можете установить один ключ или группу выбранных ключей на указанный гибкий, жёсткий диски или внешний USB диск (Флеш диск или Флеш карта в картосчитывателе). При этом есть несколько вариантов. Можно выбрать один из вариантов установки выбранных ключи: 1. все - короткие и длинные 2. только длинные 3. только короткие 4. Установка с предпочтением: устанавливаются длинные и если нет длинного для выбранного типа лицензии, то устанавливается короткий вариант ключа. устанавливаются короткие и если нет короткого для выбранного типа лицензии, то © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 89 устанавливается длинный вариант ключа. При этом на кнопке общ ей установки меняется картинка в соответствии с выбором. Если вы подключаете или отключаете сменные носители во время работы программы, то для обновления списка носителей нажмите на кнопку "Обновить список дисков". Вновь подключенный носитель появится в списке. После установки соответствующ ие имена ключей будут покрашены Если ключ уже установлен на диске, то появится окно с просьбой подтвердить установку поверх имеющ егося. Если у вас имеются оригинальные ключи, то естественно надо отказаться от перезаписи. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 90 EKB Installer Проверка ключей после установки 2.7.1 Установка с помощью Siemens.exe Для установки коротких ключей из набора можно использовать программу Siemens.exe. Скопируйте в каталог с программой требуемые ключи (не более 100 штук единовременно) и запустите программу. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 91 Если в каталоге с Сименс.ехе нет ключей, то при запуске будет выведено следующ ее сообщ ение 2.7.2 Установка временных ключей Для некоторых программ можно установить временные ключи на срок от нескольких часов до года работы. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 92 EKB Installer Для некоторых программ можно установить временные ключи на срок от нескольких часов до года работы. Во время установки временного ключа в каталогах Windows и Windows\System32 создаются каталоги *attis с одним пустым файлом. Временный ключ SITTA*.ekb устанавливается в каталог C:\AX NF ZZ После окончания срока работы следует удалить временные ключи и их следы. В противном случае возможны проблемы при работе нормальных ключей. 2.7.2.1 Удаление временных ключей и их следов Для некоторых программ можно установить временные ключи на срок от нескольких часов до года работы. После окончания срока работы следует удалить временные ключи в каталоге \AX NF ZZ и их следы. В противном случае возможны проблемы при работе нормальных ключей. Также надо удалить каталоги *attis в папках Windows и Windows\System32 или Windows\Sysnative В этих каталогах находится файл пустышка. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian После удаления временных ключей и их следов C:\Windows, C:\Windows\System32 или C:\Windows\Sysnative (для W7 x64) можно снова установить временные ключи Надо учитывать что эти файлы и каталоги имеют атрибут Скрытый Системный и требуется разрешить показ таких файлов операционной системе и программе TotalCommander. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 93 94 2.8 EKB Installer Проверка ключей после установки После установки ключей требуется провести процедуру проверки ключа в программе ALM. Иначе в некоторых случаях при запуске программы вы можете увидеть предупреждение об отсутствии ключа, который вы только что установили. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 2.9 95 Неизвестные базе ключи Пример если найдены новые или неизвестные базе ключи после установки новых программ 2.10 Элементы управления Дерево со списком программ и таблица со списком ключей Поле для вывода комментариев и справочной информации Строка выбора языка интерфейса Строка выбора диска для установки ключей и кнопка обновления списка дисков Строки ввода серийных номеров Строка и кнопка для поиска ключа по заданному слову Кнопка вызова окна для работы с образами Жёлтых дискет Поле выбора предпочтений типа лицензии при установке Кнопки инсталяции короткого, длинного или всех выбранных ключей 2.10.1 Дерево со списком программ В панели "Дерево продуктов" размещ ен список продуктов и разделы выбора. Вверху размещ ены позиции для просмотра: 1. новых (ключей не перечисленных в базе) 2. всего списка ключей 3. списка выбранных ключей 4. списка найденных по заданному в строке поиска шаблону ключей 5. списка ключей в выбранном каталоге на диске 6. установленных на жёстких дисках ключей (с подперечнем дисков) 7. списка комплексных наборов ключей для больших продуктов типа Step7 Professional, WinCC, PCS7 и других. 8. список отдельных программ в алфавитном порядке При наличии нескольких версий продуктов с большим перечнем ключей они выделены в отдельные подразделы 2.10.2 Tаблица со списком ключей Список ключей оформлен в виде таблицы. В первом столбце отображается номер ключа в базе данных. Во втором столбце расположены ячейки выбора ключа. Для выбора всех ключей в текущ ем разделе нажмите в квадратик для галочки в первой строке. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 96 EKB Installer Установленные ключи выделяются цветом - зеленые ячейки для установленных коротких ключей и синии для длинных. 2.10.3 Ввод серийных номеров Имеются 2 строки для ввода серийных номеров, так называемых ID KHE, обычно указываемых на жёлтых лицензионных дискетах и прилагаемых сертификатах. 10 символьный номер предназначен для коротких ключей. 20 символьный номер предназначен для длинных ключей. Вы можете не менять эти номера, а предоставить это сделать программе или можете выбрать один из номеров из списка номеров ключей, установленных на вашем компьютере. 2.10.4 Выбор языка интерфейса В настоящ ий момент поддерживаются 6 языков для меню и подсказок Английский, Русский, Немецкий, Французский, © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 97 Испанский, Итальянский При смене языка меняются подписи для элементов управления и подсказок 2.10.5 Выбор диска назначения Выберите диск для установки ключей с помощ ью выпадающ его списка. В случае если во время работы вставляется или вынимается сменный носитель (например USB Флэш) требуется нажать на кнопку "Обновить список" После этого в списке отобразится текущ ий набор дисков. Сущ ествуют ограничения программ авторизации AuthorsW и ALM. Короткие ключи нельзя перенести на сменный носитель и установить с него. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 98 EKB Installer 2.10.6 Экспорт таблицы По нажатию правой кнопки мышки вызывается местное меню. Можно копировать содержимое ячейки в буфер обмена для дальнейшей вставки в другом приложении. Можно сохранить текущ ую таблицу в в текстовый файл. В качестве разделителей столбцов используется символ табуляции. В редакторе Microsoft Word этот текст можно преобразовать в таблицу. Можно создать образ Жёлтой дискеты с 1 ключём для последующ ей записи на дискету. 2.11 Yellow Disk Начиная с версии STEP7 v5.4 SP2 ключи поставляются на Жёлтых Флешках. Кнопка вызова окна для работы с образами Жёлтых дискет © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 99 С помощ ью этой утилиты можно создать Жёлтую дискету из образов нескольких типов: IMA, IMZ* - WinImage IMG - FloppyImage BIN - FDA (Floppy Disk Analyzator for DOS) *Сжатые образы в формате IMZ (WinImage) надо предварительно распаковать в файл с расширением IMA. По завершению записи будет отформатирована "лицензионная" дорожка. В настоящ ий момент Сименсом для этой цели используются дорожки от 71 до 79. Если вы уже создали Жёлтую дискету в другой программе (в тех же WinImage или FloppyImage), то вы можете отдельно отдельно отформатировать "лицензионную" дорожку, нажав на © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 100 EKB Installer соответствующ ую клетку. Правильность создания дискеты можно проверить в программе авторизации AutorsW или ALM, выбрав проверку целостности любого ключа. По характерному "скрежету" шагового двигателя перемещ ения головки можно также определить об успешности процедуры. Если вы не услышите "скрежета" - значит дискета была создана неправильно или не была отформатирована нужная дорожка. В этом случае можете последовательно форматировать дорожки от 71 до 79 и проверять в целостность в Авторизаторе. Для считывания фирменной Жёлтой дискеты в файл-образ можете использовать кнопку "Read Yellow Disk" или считать через программу WinImage. При попытке чтения "лицензионной" дорожки WinImage выдаст предупреждение об ошибке чтения. Нажмите кнопку "Игнорировать" для продолжения создания образа. Можете запомнить номер этой дорожки для форматирования в нашей программе. Если ошибка чтения произошла в начале или середине фирменной дискеты, то значит эта дискета уже начала приходить в негодность. Дискеты записанные программой FDA содержат много дорожек ошибочно отформатированных нестандартно - также игнорируйте эти ошибки. Не выходя из WinImage вы можете записать только что полученный образ на дублирующ ую дискету и затем отформатировать "лицензионную" дорожку в нашей программе. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 101 Для некоторых программ (в частности ВыньСС и ВебНавигатор) с дискеты можно инсталлировать только SISLA ключи. По какой то причине SIFLA* ключи игнорируются при инсталляции - их названия жёстко забиты в инсталляторе. 2.12 Yellow Flash и её клонирование Видео как клонировать флешку с ключами https://www.youtube.com/watch?v=bdJoEpY2TpQ © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 102 EKB Installer Начиная с версии STEP7 v5.4 SP2 ключи поставляются на Жёлтых Флешках. При использовании авторизатора ALM стало возможным применять в качестве носителя длинных ключей Флэш память. Вы можете перенести длинные ключи на Флэш память и с помощ ью программы WinImage сделать образ этой Флэшки, а затем восстановить все ключи ихз этого образа Флэш память любого типа и размера. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 2.13 103 FastCopy keys v3.0 Второе поколение Быстрокопируемых длинных ключей РАБОТАЕТ НОРМАЛЬНО с ALM v3/v4. После установки из EKB_Install их можно просто копировать на любой носитель и затем в каталог C:\AX NF ZZ любым приложением Windows. Но после перемещения через АЛМ они теряют свойство быстрокопируемости и становятся обычными ключами со всеми последствиями. Нормальные ключи можно переносить только через АЛМ. Опасайтесь подделок ! Подделки хоть формально и являются БыстроКопируемые, но не переносятся через АЛМ из-за © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 104 EKB Installer незнаний авторов подделки всех тонкостей. Но ждём АЛМ v4.1, возможно будет так 2.14 Multikey АЛМ позволяет переносить ключи с разными серийными номерами на один диск. При этом вторая половинка ключа добавляется к уже сущ ествующ ему ключевому файлу. Размер файла увеличивается на 1280 байт. В АЛМ показываются все серийные номера в отдельных строчках, но на диске это один файл. При уносе ключа, его половинка изымается из общ его ключа. Пример на рисунке. 2.15 Проблемы Ошибка при запуске программы "List index out of bounds" Проблемы после установки ALM v3.0 HF3 Проблемы с ВыньСС Нужен SIUPA9WRC5--3 POWERPACK (upgrade) ключ ? 2.15.1 Проблемы при запуске программы Problem: При запуске программы выводятся сообщения об ошибке. На другом компьютере программа работает без проблем. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 105 EKB_Install но ни один exe файл не запускается - нарушение доступа по адресу..... Стоит лицензионная XP SP2 Русская. ..... Воткнул USB флешку и все заработало, без флешки никак не хотела. Если бы задающий вопрос более подробно описал своё железо, то до меня причина этой проблема дошла бы раньше. Всего то и надо было написать, что комп без гибкого дисковода. Эта проблема проявляется на нотебуках без гибкого дисковода и с жёстким диском только с одним разделом. Так как у меня тоже есть нотебук без дисковода, но жёсткий диск всегда поделён на несколько разделов, то я этой ошибки не замечал. По умолчанию в программе вибирался второй по порядку диск после флопповода. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 106 EKB Installer 2.15.2 Проблемы после установки ALM v3.0 HF3 На некоторых компьютерах сразу после установки обновления программы ALM 3 HF3 (из Step7 v5.4 SP2) могут возникнуть проблемы с работоспособностью оригинальных и неоригинальным ключей. Причина ошибки пока неизвестна. Методы решения проблемы. 1. Перезагрузите компьютер. 2. Проверьте ключи через программу ALM. 3. Попробуйте переустановить программу ALM. 4. Переустановите ключи. 5. Деинсталлируйте новую версию программы и установите предыдущую версию ALM 3 HF1. Или установите более новую версию. 2.15.3 Проблемы после установки ALM v5.0 ! у всех предыдущ их версий возможна ошибка, если на диске установлены ключи нового образца ALM v5 :( Добавили новый тип кодировки. Ошибка будет устранена в следующ их версиях. EKB_Install_2010_05_09 09/05/2010 одна ошибка связанная с АЛМ 5 блокирована Из-за выхода новой версии ALM v5 возможно будет много промежуточных версий по мере нахождения новых проблем. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 2.15.4 Проблемы с ВыньСС From a diskette it is possible to install only SISLA keys С дискеты можно инсталлировать только SISLA ключи © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 107 108 EKB Installer See LogFiles in C:\Program Files\SIEMENS\WINCC\Diagnose for example License.Log when License key A9WRC installed 02/01/2007 13:16:50 InitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | NameForMessageBox = | Name of License = SIFLA9WRC70600 | Text of License = WinCC RC (262144) | 02/01/2007 13:16:50 InitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | NameForMessageBox = | Name of License = SIFLA9WRC70600 | Text of License = WinCC RC (262144) | 02/01/2007 13:17:07 InitLicense RT | AppName = OptRT:CHIPCARD | CycleCheck = no | NameForMessageBox = | Name of License = SIFLA1WPC40600 | Text of License = WinCC Chipcard | 02/01/2007 13:17:07 ExitLicense RT | AppName = OptRT:CHIPCARD | CycleCheck = no | Name of License = SIFLA1WPC40600 | Text of License = WinCC Chipcard | 02/01/2007 13:17:08 InitLicense CS | AppName = AppCS:TlgASO | CycleCheck = yes | NameForMessageBox = | Name of License = SIFLA9WTG30600 | Text of License = WINCC Archive (30000) | 02/01/2007 13:18:48 InitLicense xx | AppName = ConnectivityPack | CycleCheck = no | NameForMessageBox = | Name of License = SIFLA9WOP10600 | Text of License = WinCC Connectivity Pack | 02/01/2007 13:18:48 ExitLicense xx | AppName = ConnectivityPack | CycleCheck = no | Name of License = SIFLA9WOP10600 | Text of License = WinCC Connectivity Pack | 02/01/2007 13:30:15 ExitLicense CS | AppName = AppCS:TlgASO | CycleCheck = yes | Name of License = SIFLA9WTG30600 | Text of License = WINCC Archive (30000) | 02/01/2007 13:30:17 ExitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | Name of License = SIFLA9WRC70600 | Text of License = WinCC RC (262144) | 02/01/2007 13:30:17 ExitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | Name of License = SIFLA9WRC70600 | Text of License = WinCC RC (262144) | Example when installed 2 License key A9WRC. Low key with 128 tags block High key with 65536 tags © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 109 Example License.Log when installed 2 License key A9WRC. 02/01/2007 14:39:29 InitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | NameForMessageBox = | Name of License = SIFLA9WRC10600 | Text of License = WinCC RC (128) | 02/01/2007 14:39:29 InitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | NameForMessageBox = | Name of License = SIFLA9WRC10600 | Text of License = WinCC RC (128) | ..... You need use only one key with max Tags Example License.Log when License key A9WRC not installed for example Authorinformation.inf when License key A9WRC* not installed License installed needed to install Product SI--A9WRC?---No Yes Yes Simatic WinCC RC (Runtime + Development) SIFLA9WSN40600 Yes Yes No WebNavigator 50 Clients © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 110 EKB Installer SIFLA9WOP10601 Yes SIFLA9WSPA0600 Yes No No No No WinCC Option Connectivity Pack ProAgent WinCC and part of License.Log when License key A9WRC* not installed 02/01/2007 14:10:20 Control Center - Demo Mode ConfigurationSystem enabled 02/01/2007 14:10:20 NoLicense CS | Name of License = A9WRC?0600 | Text of License = Simatic WinCC RC (Runtime + Development) | Exists = No | 02/01/2007 14:10:20 InitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | NameForMessageBox = | Name of License = A9WRC?0600 | Text of License = Simatic WinCC RC (Runtime + Development) | 02/01/2007 14:10:22 NoLicense ED | Name of License = A9WRC?0600 | Text of License = Simatic WinCC RC (Runtime + Development) | Exists = No | 02/01/2007 14:10:22 Control Center - Demo Mode Editors enabled 02/01/2007 14:10:22 InitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | NameForMessageBox = | Name of License = A9WRC?0600 | Text of License = Simatic WinCC RC (Runtime + Development) | ..... 2.15.5 WinCC Demo mode Q: У меня установлены все ключи, но WinCC пишет "Демо режим" Надо устанавливать ТОЛЬКО 1 RC ключ с нужным количеством тэгов. В данном случае самый младший ключ на 128 Tэгов работает и блокирует более мощ ные ключи !!! © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 111 перенеси лишние RC ключи на дискету Q: Я не знал этого. Теперь всё работает нормально 2.15.6 Нужен SIUPA9WRC5--3 POWERPACK (upgrade) ключ ? При открытии проекта WinCC 6 требует ключ SIUPA9WRC4----1. Подскажите, где мне взять таковой? Просто установи обычный на нужное тебе число тэгов - например SIFLA9WRC70602 WINCC-V6 RC 256K PTg 512 ATg. Не забудь удалить старый на меньшее число тэгов иначе он может не дать доступ к более мощ ному ключу. Упгрейд ключей ты в сети не найдёшь - я их не поддерживаю за ненадобностью и лишней мороки. Ключи для обновления лицензии состоят из двух ключей на дискете *.EKB и *.UPG и одного старого *.EKB на жёстком диске. Пример дискеты для обновления версии программы. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 112 EKB Installer 2.15.7 После установки ключа программа всё равно требует ключ После установки ключа SmartLabel всё равно требует ключ. Перед первым запуском SmartLabel надо проверить установленный ключ в АЛМ. Это глюк не только SmartLabel, но и некоторых других программ при первом запуске после установки нового ключа - они не всегда проверяют обновление ключей. 2.15.8 Об ошибке EKBBackup CRC Error В версиях EKB_Backup осталась прежняя ошибка о якобы неправильной контрольной сумме CRC в некоторых файлах. Это ошибка у самого fubrus0 из-за незнания принципов подсчёта контрольной суммы некоторых файлов. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian В результате после "исправления" ключи становятся непереносимыми на другие носители. а перенесённые ключи становятся неактивными, т.е нерабочими. Такая же ошибка имеется в другой программке сделанной на исходниках от Фубруса. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 113 114 EKB Installer 2.15.9 License concept PCS 7 V7 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 115 2.15.10 License concept PCS 7 V8.0 Все тэговые лицензии не будут иметь номера версии (SIFCY****9999*.EKB), что облегчит переход к следующим версиям PCS7 >> V8.0 Количество лицензий в комплектах будет уменьшено – один ключ комплексный ключ заменит кучу других Увеличить количество тэгов можно будет только покупкой дополнительных тэговых лицензий Далее представлены изменения по сравнению с предыдущими версиями SIFLP7OSRE0800 комплексный ключ "SIFLP7OSRE0800" "OS Server Redundancy" содержит: "SIFLP7REDU0800" "OS Redundancy" "SIFLP7SERB0800" "OS Server Basic" "SIFLP7SISB0800" "OS Single Station Basic" © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 + тэговый SIFCYP7ORT9999* * версии для определённого количества тэгов 116 EKB Installer SIFLP7OSES0800 + комплексный ключ "SIFLP7ASES0800" "AS Engineering" содержит: "SIFLA171040505" "Step 7 5.5" SIFLA1CFCU0800" "CFC unlimited 8.0" "SIFLA1DOCP0504" "DocPro5.4" "SIFLA1SCL_0503" "SCL 5.3" "SIFLA1SFC_0800" "SFC 8.0" "SIFLA1THPO0800" "TH-PO 8.0" SIFLP7OSES0800 комплексный ключ "SIFLP7OSES0800" "OS Engineering" содержит: "SIFLP7OSEB0800" "OS Engineering Basic" "SIFLP7REDU0800" "OS Redundancy" "SIFLP7SERB0800" "OS Server Basic" © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Russian 117 2.15.11 Какие ключи нужны для PCS7 v8.0 Часть ключей находится в ветках PCS7 v8.0 другую часть можно брать из веток WinCC v7.0 В v8.0 улучшена работа диагностики, связанной с ключами - поэтому возможно будет легче найти недостающ ие ключи © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 118 EKB Installer После установки недостававшего ключа требуется обязательная проверка ключей в АЛМ и перезапуск WinCC © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Top Level Intro This page is printed before a new top-level chapter starts Part III 120 3 EKB Installer Francais Les annйes йloignйes йloignйes le Siemens a confiй l'йlaboration de la protection pour les produits de programme а la sociйtй StopCopy. Celle-lа a йlaborй la protection а la base des fichiers clйs installйs sur les disquettes spйciales Jaunes - d'ici et le nom. De plus йtait affirmй que la protection jusqu'а celui-lа est sыre que "protйgera de facon certaine vos investissements". Un grand merci humain aux spйcialistes StopCopy pour le travail fait dans le domaine de la crйation de l'atmosphиre de l'accessibilitй des produits du Siemens aux grands publics des programmeurs. Cela a fait les dйcisions de programme et de matйriel trиs populaire et rйclamй dans le monde entier qu'a permis dignement de rivaliser avec d'autres producteurs de l'automatique mкme sur leur territoire. Prendre pour l'exemple des USA avec et eux B&R et General Electric... Et en consйquence a йpargnй effectivement les investissements mis. En effet, il faut acheter le fer tout de mкme Au Siemens. Le programme donnй est destinй pour l'installation des clйs des licences dans le cas oщ : "Le jour noir du programmeur" est arrivй - le systиme a volй avec toutes les licences, mais travailler il faut, mкme dans les rйgions peu accessibles; Quand est sorti un nouveau produit chaud, mais l'argent pour lui les autoritйs jusqu'а ce que donnent; Veux йtudier simplement pour le dйveloppement total. Est йlaborйe en raison de l'йmission de la version ALM 3.0 - le Manager Litsenzy, aprиs qui, les clйs soi-disantes "vite copiйes" longues de la licence ont cessй de travailler а cause de leur ignorance comme ce Manager Litsenzy. On pouvait simplement copier les clйs "vite copiйes" au catalogue des licences C:\AX NF ZZ. Ils utilisaient de service l'"entrйe" dans le systиme de la licence ALM <v3.0, qui йtait couverte avec la sortie Step7 v5.4 SP1. On aussi appliquait le codage supplйmentaire des clйs, c'est pourquoi de nouvelles clйs ne sont pas visibles а ALM v2.2. De nouvelles clйs se reflиtent incorrectement dans de vieilles versions des programmes EKB_Rename, EKB_Backup et dans EKB_Install <v.2007.03.03. Je n'appelle pas utiliser les programmes du Siemens dans les buts intйressйs. Les programmes pour les buts industriels doivent кtre mis en principe aux devis des projets et кtre acquis pour l'argent du client. Peu а qui viendra а la tкte livrer au client gauche ПЦС7 avec de gauches clйs et sans certificat pour une grande production. Mais pour l'utilisation domestique probablement est absent rien plus mal de remue-mйnage avec les disquettes de licence. Les cas, quand la licence surmenйe de firme Jaune commenзait а s'йbouler chez l'Йtranger avec la perte des clйs dans le terrain йloignй sans tйlйphone et Internet arrivaient. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Francais 3.1 IntoductionF Dans la fenкtre du programme sont disposйs : L'arbre avec la liste des programmes et le tableau avec la liste des clйs Paul pour la conclusion des commentaires et l'information rйfйrentielle La ligne du choix de la langue de l'interface La ligne du choix du disque pour l'installation des clйs et le bouton de la rйnovation de la liste des disques Les lignes de l'introduction des numйros par lots La ligne et le bouton pour la recherche de la clй selon le mot donnй Le bouton de l'appel de la fenкtre pour le travail avec les images des disquettes Jaunes Paul du choix des prйfйrences comme la licence а l'installation Les boutons de l'installation court, long ou toutes les clйs choisies © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 121 122 3.2 EKB Installer Nous йtablirons les clйs plus tard Pendant l'installation des programmes Simatic nous refusons l'installation des clйs. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Francais 3.3 Type de licence Type de licence Sans restriction (illimitйe) Count relevant (jour/s) Rental (limitation en heures, limitation en jours, date d'expiration) Trial (limitation en jours) Pay-per-use Demo (limitation en heures, limitation en jours, date d'expiration) Contract Upgrade Power Pack © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 123 124 EKB Installer Validitй Sans restriction (Unlimited) : illimitйe Count relevant : nombre de jours Rental : durйe restante + unitй / date Trial : temps restant (durйe d'exйcution totale) Pay-per-use : selon contrat Demo : durйe restante + unitй / date Contract : selon contrat Upgrade : selon contrat Power Pack : selon contrat 3.4 Numйro de licence Numйro de sйrie de la licence logicielle (а 10 chiffres = autorisation, а 20 chiffres = clй de licence) Vous pouvez ne pas changer ces numйros, mais accorder cela faire au programme Ou pouvez choisir un des numйros de la liste des numйros des clйs йtablies sur votre ordinateur. 3.5 Required keys La liste des clйs nйcessaires aux programmes йtablis. Des clйs tagues йtablissez seulement un avec la quantitй nйcessaire est tag (l'exemple pour CFC sur le dessin) Vous pouvez prйciser les noms des clйs manquant dans le manager des licences ALM © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Francais 125 La clй complexe S7PROF* pour la version professionnelle STEP7 peut кtre utilisйe au lieu de 4 clйs particuliиres A17104 *, A1PLC_ *, A1S7GR *, A1SCL_*. La clй PCS7TT* pour le programme PCS7 peut кtre utilisйe au lieu de l'entier de l'assortiment des clйs. Vous pouvez prйciser les noms des clйs manquant supplйmentaires dans le manager des licences ALM © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 126 3.6 EKB Installer Unknow keys Example 3.7 desactiver la Trial Licence Comment désactiver la Trial Licence, lorsque le message indiquant que la Trial Licence est périmée apparaît, bien que la Floating Licence a été installée? http://support.automation.siemens.com/WW/view/en/24200966 Instructions: La Trial Licence est faite pour une utilisation temporairement limitée du logiciel SIMATIC par exemple pour des tests et après l'activation, elle est valable pour au maximum 14 jours. Si après l'écoulement de ce temps, vous installez une licence pour une utilisation illimitée (licence Single, Floating ou Upgrade) ) et que après l'installation vous obtenez tout de même le message que la licence Trial est périmée, nous vous recommandons d'effacer la licence Trial dans le répertoire "AX NF ZZ" : Procédure pour effacer une licence Trial: 1. Ouvrez l'ALM dans MS Windows par : "Démarrer > SIMATIC > License Management > Automation License Manager" et marquez avec le curseur le lecteur (par ex. "C"),sur lequel vos licences sont installées. Dans la fenêtre de droite de Automation License Manager apparaît alors le tableau avec les licences installées. Vous avez besoin dans la vue, du nom de fichier (clé de licence) et des 20 chiffres du numéro de licence. Si ces colonnes étaient encore masquées, alors ouvrez par "Affichage > Définir..." le dialogue "Définir la vue". Sélectionnez dans la partie basse de ce dialogue dans l'onglet "Colonnes" la "Clé de licence" et "N° de licence". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Francais 127 Image 01 Entrez ensuite un nom sous "Editer la vue:" et cliquez sur le bouton "Appliquer". Après la validation avec OK, les colonnes "Clé de licence" et "N° de licence" apparaissent dans Automation License Manager. 2 Marquez dans l'explorateur Windows, le répertoire "AX NF ZZ" sur votre disque dur ou dans le lecteur "C", afin de faire apparaître dans la fenêtre de droite de l'explorateur, le nom des fichiers des licences. Si le répertoire "AX NF ZZ" ou les fichiers de répertoire ne sont pas visibles, alors ouvrez le dialogue "Outils > Options des dossiers.." et sélectionnez l'onglet "Affichage": désactivez ici l'option "Masquer les fichiers protégés du système d'exploitation © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 128 EKB Installer (recommandé)" et activez l'option "Afficher tous les fichiers et dossiers". Cliquez ensuite sur le bouton "Appliquer" et validez avec OK. Image 02 Le répertoire "AX NF ZZ" sera alors affiché dans l'explorateur Windows. 3 Comparez maintenant dans Automation License Manager, le nom de fichier (Clé de licence) de la licence Trial avec le nom de fichier dans le répertoire "AX NF ZZ". Sur la vue affichée dans Automation License Manager déterminez le nom de fichier de la licence Trial à effacer (image 03), que vous retrouverez alors dans le répertoire "AX NF ZZ". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Francais 129 4 Marquez la licence Trial trouvée dans le répertoire "AX NF ZZ" et cliquez sur le bouton droit de souris. Cliquez ns le menu contextuel suivant sur "Effacer". Après l'effacement, le message indiqué plus haut n'apparaît plus. 3.7.1 Install Trial keys Pendant l'installation de la clй temporaire dans les catalogues Windows et Windows\System32 il y a des catalogues *attis avec un fichier vide. La clй temporaire SITTA*.ekb est йtablie au catalogue C:\AX NF ZZ See Remove Trial keys © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 130 3.7.2 EKB Installer Remove Trial keys Pour certains programmes on peut йtablir les clйs temporaires pour un dйlai de de quelques heures а annйe du travail. Aprиs l'йchйance du travail il faut enlever les clйs temporaires et leurs traces. Dans le cas contraire les problиmes sont possibles au fonctionnement des clйs normales. Il faut enlever aussi le catalogue au catalogue Windows et Windows\System32 Dans ce catalogue il y a un fichier vide. 3.8 Siemens.exe Pour l'installation des clйs courtes de la composition on peut utiliser le programme Siemens_exe. Copiez au catalogue avec le programme les clйs demandйes (pas plus 100 clйs exceptionnellement) et lancez le programme. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Francais 131 Si dans le catalogue avec Siemens_exe il n'y a pas de clйs, а la mise en marche on déduit{retire} le message suivant 3.9 transferring a license key to a PC without floppy disk drive Quelles sont les options possibles pour transférer les clés de licences sur un PC sans lecteur de disquette ? Conseil de Configuration : A compter de maintenant sur la plupart des PC maintenant , les PC ne sont plus équipés de base avec des lecteurs de disquettes . Cependant , pour installer certains produits de logiciel d'automatisme il vous sera nécessaire d'utiliser un lecteur de disquette pour installer les clés de licence qui se trouvent obligatoirement sur disquette. Avec l'Automation License Manager vous pouvez installer les licences sur un PC sans devoir disposer d'un lecteur de disquettes mais avec les médiums selon de tableau ci-dessous : © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 132 EKB Installer Type de clé de Licence Autorisatio Clé de Licence n (par exemple Floating (par License Key STEP 7 exemple V5.3) STEP 7 V5.2) Médium pour le Transport Lecteur de disquette externe avec interface USB X X Clé USB en tant que média pour transporter d'un PC équipé d'un lecteur de disquette vers un autre sans lecteur de disquette -. X PC équipé d'un lecteur de disquette et qui sera partagé à travers le réseau . X1) X1) Second PC équipé d'un lecteur de disquette et un transfert Offline X1) (vous reporter à l'aide en ligne de l'Automation License Managers) X1) 1) L'Automation License Manager doit aussi être installé sur l'autre PC . Note: Vous pouvez reconnaître une clé de licence à partir de l'Automation License Manager au fait que le numéro de licence soit constituée de vingt chiffres Une Autorisation possède comme numéro de licence 10 chiffres seulement. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Top Level Intro This page is printed before a new top-level chapter starts Part IV 134 4 EKB Installer Italiano Enter topic text here. 4.1 Intoducione In a window of the program are located: Tree with the list of programs and the table with the list of keys Field for a conclusion of comments and the help information Line of a choice of language of the interface Line of a choice of a disk for installation of keys and the button of updating of the list of disks Lines of input of serial numbers Line and the button for search of a key by the set word The button of a call of a window for work with images of Yellow diskettes Field of a choice of preferences of type of the license at installation Buttons of installation short, long or all chosen keys Come si puo disattivare la Trial License, se compare la segnalazione che la Trial License e terminata, nonostante sia stata installata la Floating License? © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Italiano 4.2 We shall install keys later During installation of programs Simatic it is refused installation of keys. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 135 136 4.3 EKB Installer Tipo di licenza Tipo di licenza Illimitata (Unlimited) Count relevant (Tag/s) Rental (Limited Hours, Limited Days, Expiration Date) Trial (Limited Days) Pay-per-use Demo (Limited Hours, Limited Days, Expiration Date) Contract © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Italiano Upgrade Power Pack Validitа Illimitata (Unlimited): illimitata Di rilievo per Count: numero dei tag Per Rental: durata residua + unitа / data Per Trial: durata residua (durata complessiva) Per Pay-per-use: secondo il contratto Per Demo: durata residua + unitа / data Per Contract: secondo il contratto Per Upgrade: secondo il contratto Per Power Pack: secondo il contratto 4.4 Numero di licenza Numero di serie della licenza software (10 caratteri= autorizzazione; 20 caratteri = chiave di licenza) © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 137 138 4.5 EKB Installer Chiavi necessari The list of necessary keys for the installed programs. From tag keys install only one with necessary quantity of tags (an example for CFC in figure). You can specify names of missing keys in the manager of licenses ALM Complex key S7PROF* for professional version STEP7 can be used instead of 4 separate keys A17104 *, A1PLC_ *, A1S7GR *, A1SCL_*. Key PCS7TT* for program PCS7 can be used instead of the whole complete set of keys. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Italiano You can specify names of missing additional keys in the manager of licenses ALM 4.6 Installazione di chiavi di licenza © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 139 140 4.7 EKB Installer Unknow keys Example of unknow keys 4.8 disattivare la Trial License Come si può disattivare la Trial License, se compare la segnalazione che la Trial License è terminata, nonostante sia stata installata la Floating License? http://support.automation.siemens.com/WW/view/en/24200966 Istruzioni La Trial License serve per l'utilizzo limitato nel tempo del software SIMATIC p. es. per test e dopo l'attivazione, questa licenza è valida per max. 14 giorni. Se dopo che questo tempo è trascorso, si installa una licenza per l'utilizzo illimitato nel tempo (Single, Floating opp. Upgrade License) e dopo l'installazione si riceve la segnalazione che la Trial License è scaduta, si raccomanda di cancellare la Trial License nella cartella "AX NF ZZ". Modo di procedere per la cancellazione di una Trial License 1.Aprire in MS Windows lo ALM tramite "Start > SIMATIC > License Management > Automation License Manager" e selezionare con il cursore il drive (p. es. "C"), su cui sono installate le licenze. Nella finestra di destra dello Automation License Manager compare poi la tabella con le licenze installate. Per la visualizzazione delle licenze servono i nomi dei file (License Key) e il numero di licenza a 20 posizioni. Se queste colonne non dovessero essere ancora visualizzate, allora tramite "Vista > Definizione..." aprire il dialogo "Definisci vista". Scegliere nella parte inferiore di questo dialogo nel registro "Colonne" la "License Key" ed il "License number". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Italiano 141 Figura 01 Registrare poi un nome sotto "Elabora vista:" fare clic sul pulsante "Applica". Dopo la conferma con OK compaiono le colonne "License Key" e "License number" nello Automation License Manager. 2 Selezionare nell'Explorer la directory "AX NF ZZ" sul disco opp. nel drive "C", in modo che nella finestra di destra della Explorer compaiano i nomi di file delle licenze. Se la directory "AX NF ZZ" opp. i file in questa directory non dovessero essere visibili, aprire il dialogo "Strumenti > Opzioni cartella..." e scegliere il registro "Visualizza": disattivare l’opzione "Nascondi i file protetti di sistema (raccomandato)" e attivare l’opzione "Visualizza tutti i file e cartelle". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 142 EKB Installer Fare poi clic sul pulsante "Applica" e confermare con OK. Figura 02 La directory "AX NF ZZ" viene poi visualizzata in Explorer. 3 Confrontare ora nell’Automation License Manager i nomi dei file (License Key) della Trial License con i nomi dei file nella cartella "AX NF ZZ". Tramite la visualizzazione impostata nello Automation License Manager si rilevano per la Trial License da cancellare i nomi di file (Figura 03), che si trovano poi nella cartella "AX NF ZZ". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Italiano 143 Figura 03 4 Selezionare la Trial License trovata nella directory "AX NF ZZ" e fare clic con il tasto destro del mouse. Nel menùcontestuale che compare fare poi clic su "Cancella". Dopo la cancellazione la segnalazione sopra descritta non dovrebbe piùcomparire. 4.9 Siemens.exe For installation of short keys from a set it is possible to use program Siemens.exe. Copy in the catalogue with the program demanded keys (no more than 100 keys lumpsum) and start the program. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 144 EKB Installer If in the catalogue with Siemens_exe there are no keys at start the following message will be show. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Italiano 4.10 145 trasferire la chiave di licenza su una PC senza drive per dischetti Quali possibilità ci sono di trasferire la chiave di licenza su una PC senza drive per dischetti? Avvertenze di configurazione Da un certo tempo vengono prodotti anche computer senza drive per dischetti. Per l'installazione di alcuni prodotti software di automazione è però necessario un drive per dischetti per l'installazione delle chiavi di licenza fornite su dischetto. Con lo Automation License Manager su un PC senza drive per dischetti le licenze possono essere installate tramite le seguenti vie: Tipo di chiave di licenza Autorizzazione (p. es. STEP 7 V5.2) License-Key (p. es. Floating License Key STEP 7 V5.3) Drive per dischetti esterno con interfaccia USB X X USB Stick come mezzo di trasferimento da un computer con drive per dischetti ad un computer senza drive per dischetti -- X Secondo computer con drive per dischetti collegato alla rete aziendale e trasferimento tramite la rete X1) X1) Secondo computer con drive per dischetti e trasferimento offline (vedi la Guida dello Automation License Manager) X1) X1) Media di trasporto 1) Lo Automation License Manager deve essere installato su entrambi i computer. Avvertenza Una License Key si riconosce nello Automation License Manager dal numero di licenza a 20 posizioni. Una autorizzazione è costituita da un numero di licenza a 10 posizioni. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 146 EKB Installer © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Top Level Intro This page is printed before a new top-level chapter starts Part V 148 5 EKB Installer Espanol En los aсos lejanos, lejanos el Siemens ha encargado la elaboraciуn de la defensa para los productos informбticos a la firma StopCopy. Aquella ha elaborado la defensa en base de los ficheros clave instalados sobre los disquets especiales Amarillos - de aquн y el nombre. Se afirmaba ademбs que la defensa hasta esto es segura que " serб seguro guardar sus inversiones ". Las gracias grandes humanas los especialistas StopCopy por el trabajo hecho en el campo de la creaciуn de la atmуsfera de la accesibilidad de los productos del Siemens a las masas anchas de los programadores. Esto ha hecho las decisiones de programa y duras muy popular y reclamado por todo el mundo que ha permitido con dignidad rivalizar con otros productores de la automбtica incluso en su territorio. Tomar para el ejemplo de los EEUU con y ellos B&R y General Electric... Y conformemente ha conservado realmente las inversiones metidas. De hecho es necesario comprar el hierro da lo mismo al Siemens. El programa dado es destinado para la instalaciуn de las llaves de las licencias en el caso, cuando: Ha comenzado{pisado} " el dнa negro del programador " - el sistema de operaciones se ha estropeado junto con todas las licencias, y trabajar es necesario, incluso en las regiones poco accesibles; Cuando ha salido el producto nuevo caliente, y el dinero por йl los jefes no dan; Quieres de estudiar simplemente para el desarrollo general{común}. Es elaborado en relaciуn a la salida de la versiуn ALM 3.0 - el Manager Litsenzy, despuйs de que, asн llamados, " es rбpido copy " las llaves largas de la licencia dejaban de trabajar por su menosprecio este Manager Litsenzy. " Rбpidamente copy " pudo simplemente copiar las llaves en el catбlogo de las licencias C:\AX NF ZZ. Ellos utilizaban de servicio "a "entrada" en el sistema de la licencia ALM <v3.0, que fue cubiertas con la salida Step7 v5.4 SP1. Fue aplicadas tambiйn la codificaciуn adicional de las llaves, por eso las llaves nuevas no son mostrado en ALM v2.2. Las llaves nuevas son representadas incorrectamente en las versiones viejas de los programas EKB_Rename, EKB_Backup y en EKB_Install <v.2007.03.03. No llamo utilizar el programa del Siemens en los fines interesados. Los programas para los mбs objetivos de producciуn deben ser puesto{empenado} en general en los presupuestos de los proyectos y ser adquirido al dinero del cliente. Poco a quiйn vendrб a la cabeza poner al cliente izquierdo PCS7 con las llaves izquierdas y sin certificado a una grande producciуn. Y para el uso domйstico no hay probable nada peor alboroto con los disquets de licencia. Eran los casos, cuando la licencia derrengada de firma Amarilla comenzaba a desmoronarse al Extranjero con пропаданием de las llaves en la localidad lejana sin telйfono e Internet. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Espanol 5.1 149 IntoductionE En la ventana del programa son situado: El бrbol con la lista de los programas y la tabla con la lista de las llaves Paul para la conclusiуn de los comentarios y la informaciуn de informaciуn La lнnea de la elecciуn de la lengua de la interfacha La lнnea de la elecciуn del disco para la instalaciуn de las llaves y el botуn de la renovaciуn de la lista de los discos Las lнneas de la introducciуn de los nъmeros en serie La lнnea y el botуn para la bъsqueda de la llave por la palabra dada El botуn de la llamada de la ventana para el trabajo con las imбgenes de los disquets Amarillos Paul de la elecciуn de las preferencias como la licencia junto a la instalaciуn Los botones de la instalaciуn corto, largo o todas las llaves reganadas{escogidas} © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 150 5.2 EKB Installer Estableceremos las llaves tarde Durante la instalaciуn de los programas Simatic renunciamos a la instalaciуn de las llaves. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Espanol 5.3 151 Tipo de licencia Hay 2 básicos como las llaves: 1. Las llaves cortas del modelo viejo hasta el aсo 2004 2. Las llaves largas del modelo nuevo de 2004 Las llaves cortas del modelo viejo hasta el aсo 2004 son compatibles hacia arriba con la versiуn del manager de las licencias ALM. Tambiйn para el trabajo con estas llaves es posible utilizar el manager viejo AuthorsW. Junto a la instalaciуn del fichero corto sobre el disco duro hay un fichero adicional de servicio con la ampliaciуn HRD. En el par con EKB por el fichero de la llave ellos componen la licencia establecida. La ausencia HRD del fichero no permite trasladar la llave a otro disco o devolver al disquet y lleva al bloqueo del fichero clave. Las llaves largas del modelo nuevo de 2004 son compatibles solamente con la versiуn del manager de las licencias ALM. Para el trabajo con estas llaves es imposible utilizar el manager viejo AuthorsW. Parбmetros base y la diferencia Tipo de licencia Las llaves cortas Las llaves largas S7PROF53. EKB SIFLS7PROF0503. EKB © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 152 EKB Installer La longitud del nombre del fichero, los sнmbolos El formato del nombre del fichero La dimensiуn del fichero, el byte El nъmero en serie, los sнmbolos El mйtodo del cifrar El fichero auxiliar HRD Los tipos ilimitados de las licencias Los tipos limitados de las licencias Trial: tiempo SIMF y para los 14 dнas SITT A travйs de USB Flash la memoria El programa el manager 8 Corto DOS 1280 10 El disfraz consecutivo aumentativo por la mбscara > =14 Largo Windows 2560 20 El disfraz consecutivo aumentativo por la mбscara con el cifrar por las Microsofбs S7PROF53. HRD No De una plaza Que navega de red, de una plaza X*.EKB Rentale SIRT por horas, De reserva para los 14 de muchos dias dнas Es imposible Multifuncionalmente junto a la instalaciуn y el traslado a travйs de ALM AuthorsW y ALM Solamente ALM Ilimitada (Unlimited) Count relevant (Tag/s) Rental (Limited Hours, Limited Days, Expiration Date) Trial (Limited Days) Pay-per-use Demo (Limited Hours, Limited Days, Expiration Date) Power Pack Vigencia Ilimitada (Unlimited): de vigencia ilimitada Count relevant: nъmero de variables Rental: tiempo de vigencia restante + unidad / fecha Trial: tiempo de vigencia restante (tiempo de vigencia total) Pay-per-use: segъn contrato Demo: tiempo de vigencia restante + unidad / fecha © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Espanol 153 Contract: segъn contrato Upgrade: segъn contrato Power Pack: segъn contrato 5.4 N° de licencia Nъmero de serie de la licencia de software (10 cifras = autorizaciуn; 20 cifras = clave de licencia) Podйis no cambiar estos nъmeros, y concederlo hacer al programa O podйis escoger uno de los nъmeros de la lista de los nъmeros de las llaves establecidas en su ordenador. 5.5 Required keys La lista de las llaves necesarias para los programas establecidos. De las llaves tages establezcan solamente uno con la cantidad necesaria es tag (el ejemplo para CFC en el dibujo) © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 154 EKB Installer Podйis precisar los nombres de las llaves que faltan en el manager de las licencias ALM La llave compleja S7PROF* para la versiуn profesional STEP7 puede utilizarse en vez de 4 llaves separadas A17104 *, A1PLC_ *, A1S7GR *, A1SCL_*. La llave PCS7TT* para el programa PCS7 puede utilizarse en vez del juego entero de las llaves. Podйis precisar los nombres de las llaves adicionales que faltan en el manager de las licencias ALM © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Espanol 5.6 155 Encontrar la llave Para la bъsqueda de la llave introduzcan en la lнnea de la bъsqueda la palabra o la combinaciуn *, que puede encontrarse en el nombre del fichero o el nombre de la llave. Presionen el botуn " Encontrar la llave ". Por ejemplo para la bъsqueda de las llaves para Step7: · Introduzcan la palabra Step o Step prof (el registro de los sнmbolos no es importante) - la parte del nombre de la llave. · O introduzcan la palabra s7prof - la parte del nombre del fichero. En el бrbol de los productos se reflejarб la lнnea " Es encontrado N de las "palabras", y en la tabla reflejarse la lista de las llaves que corresponden al parбmetro dado de la bъsqueda. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 156 5.7 EKB Installer Install key Podйis establecer una llave o el grupo de las llaves reganadas a los discos indicados flexibles, duros o externo USB el disco (Flash el disco o el Flash la carta en CardReader). Hay ademбs algunas variantes. Es posible escoger uno de las variantes de la instalaciуn reganado las llaves: 1. Todos los - corto y largo 2. Solamente largo 3. Solamente corto 4. La instalaciуn con la preferencia: · Son establecido largo y si no existe largo para el tipo regañado de la licencia, es establecida la variante corta de la llave. · Son establecido corto y si no existe corto para el tipo regañado de la licencia, es establecida la variante larga de la llave. Ademбs sobre el botуn de la instalaciуn general se cambia el cuadro en concordancia con la elecciуn Si conectбis o desconectбis los portadores intercambiables durante el trabajo del programa, para la renovaciуn de la lista de los portadores presionen el botуn " Renovar la lista de los discos ". El portador de nuevo conectado aparecerб en la lista. Despuйs de la instalaciуn los nombres que corresponden de las llaves serбn pintado Si la llave es establecida ya sobre el disco, aparecerб la ventana con la peticiуn confirmar la instalaciуn encima de disponible. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Espanol 157 Si usted tiene unas llaves originales, es necesario renunciar naturalmente a la grabaciуn 5.8 Yellow Disk Con la ayuda de esta utilidad es posible crear Amarillo el disquet de las imбgenes de algunos tipos: IMA, IMZ* - WinImage IMG - FloppyImage BIN - FDA (Floppy Disk Analyzator for DOS) IMZ es necesario preliminarmente desempaquetar las imбgenes en el formato IMZ (WinImage) en el fichero con la ampliaciуn IMA. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 158 EKB Installer Por la terminaciуn de la grabaciуn serб escrita la senda "de licencia". En el momento presente al Siemens para este objetivo se utilizan las sendas de 71 hasta 79. Si habйis creado ya Amarillo el disquet en otro programa (en aquell WinImage o FloppyImage), Aquello podйis es separado es separado escribir la senda "de licencia", habiendo presionado la celula {jaula} que corresponde. Puedes comprobar la correcciуn de la creaciуn del disquet en el programa el manager de las licencias AutorsW o ALM, Habiendo escogido la comprobaciуn de la integridad de cualquier llave. Por el "rechinamiento" caracterнstico del motor de paso del traslado de la cabeza es posible tambiйn © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Espanol 159 determinar sobre el йxito del procedimiento. Si no oirйis el "rechinamiento" - significa el disquet fue creado incorrectamente o no fue escrita la senda necesaria. Podйis sucesivamente escribir en este caso las sendas de 71 hasta 79 y comprobar en la integridad en el manager de las licencias. Para la lectura de firma Amarillo los disquets en el fichero-imagen podйis utilizar el botуn " Read Yellow Disk " o contar a travйs del programa WinImage. Junto a la tentativa de la lectura de la senda "de licencia" WinImage darб la prevencion{advertencia} del error de la lectura. Presionen botуn " Menospreciar " para la continuaciуn de la creaciуn de la imagen. Podйis recordar el nъmero de esta senda para el formateo en nuestro programa. 5.9 Export table Por la presiуn del botуn justo del ratoncito es provocado el menъ local. Es posible copiar el contenido de la cйlula en el tope del cambio para la insercion ulterior en un otro anexo. Es posible conservar la tabla corriente en en el fichero de texto. En calidad de los sнmbolos divisorios de las columnas se utiliza el sнmbolo el tabulador. En el redactor Microsoft Word puedes transformar este texto en la tabla. Es posible crear la imagen Amarillo los disquets con 1 llave para la grabaciуn consecuente al disquet. 5.10 Unknow keys Example of unknow keys 5.11 desactivar la licencia de prueba ¿ Cómo se puede desactivar la licencia de prueba (Trial License) cuando aparece un aviso que dice que ésta ya ha caducado, a pesar de que está instalada la licencia flotante (Floating License)? Instrucciones: © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 160 EKB Installer La "Trial License" sólo se puede utilizar con el software SIMATIC durante un tiempo limitado, por ejemplo para tests, y después de su activación la licencia sólo es válida durante un máximo de 14 días. Si después de transcurrido este tiempo, se instala una licencia de utilización ilimitada de tiempo (Single License, Floating License o Upgrade License) y sigue apareciendo el mensaje que indica que la "Trial License" ya ha caducado, le recomendamos borrar la "Trial License" de la carpeta "AX NF ZZ": Procedimiento para borrar una "Trial License": 1. Abra el ALM en MS Windows, mediante la opción "Inicio -> SIMATIC -> License Management -> Automation License Manager" Seleccione ahora con el cursor la unidad de disco (por ejemplo, "C") en la que se instala la licencia. En la ventana derecha del Automation License Manager, aparece la tabla con las licencias instaladas. Para visualizar las licencias, se necesita indicar el nombre del archivo (License Key) y el número de licencia de 20 números. Si no se ven estas columnas, ábralas con ayuda del diálogo "Definir vistas": "Ver -> Definir..." En la parte inferior de este diálogo, seleccione "License Key" y el "Número de licencia" dentro del registro "Columnas". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Espanol 161 Figura 01 A continuación, indique un nombre en "Elaborar vista" y haga clic sobre el botón "Aceptar". Después de confirmar todo con OK, las columnas "License Key" y "Número de licencia" ya aparecen en el Automation License Manager. 2 Seleccione la carpeta "AX NF ZZ" en el explorador, dentro del disco duro o de la unidad "C", de forma que en la ventana de la derecha aparezca el nombre del archivo de la licencia. Si no se pueden ver el directorio "AX NF ZZ" o los archivos contenidos dentro de él, abra el diálogo "Herramientas -> Opciones de carpeta..." y elija el registro "Ver": Desactive aquíla opción "Ocultar archivos del sistema protegidos (recomendado)" y Active la opción "Mostrar todos los archivos y carpetas". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 162 EKB Installer Haga clic a continuación sobre el botón "Aceptar" y confirme todo con OK. Figura 02 Ahora ya se muestra el directorio "AX NF ZZ" en el explorador. 3 Compare ahora en el Automation License Manager en nombre de archivo (License Key) de la "Trial License" con el nombre de archivo en la carpeta "AX NF ZZ". Con ayuda de la vista ajustada en el Automation License Manager, se puede averiguar el nombre de archivo para la "Trial License" a borrar (figura 03), el cual está disponible en la carpeta "AX NF ZZ". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Espanol 163 Figura 03 4 Seleccione la "Trial License" encontrada en el directorio "AX NF ZZ" y haga clic con el botón derecho del ratón. A continuación, haga clic en la opción "Borrar" del menú contextual. Después de su borrado, ya no se debe mostrar el aviso arriba descrito. 5.11.1 Install Trial keys Durante la instalaciуn de la llave temporal en los catбlogos Windows y Windows\System32 hay unos catбlogos *attis con un fichero vacнo. La llave temporal SITTA*.ekb es establecida en el catбlogo C:\AX NF ZZ See Remove Trial keys © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 164 EKB Installer 5.11.2 Remove Trial keys Para ciertos programas es posible establecer las llaves temporales para un perнodo de algunas horas a aсo del trabajo. Despuйs de la fin del plazo del trabajo hace falta quitar las llaves temporales y sus huellas. Son posibles en caso contrario los problemas junto al trabajo de las llaves normales. Es necesario quitar tambiйn el catбlogo en la carpeta Windows e Windows\System32 En este catбlogo se encuentra el fichero vacнo. 5.12 Siemens.exe Para la instalaciуn de las llaves cortas del juego es posible utilizar el programa Siemens_exe. Copien en el catбlogo con el programa las llaves exigidas (no mбs 100 llaves simultбneamente) y pongan en marcha el programa. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Espanol 165 Si en el catбlogo con Siemens_exe no hay llaves, junto al lanzamiento serб deducido{quitado} el mensaje siguiente 5.13 transferir una licencia a un PC que no dispone de disquetera ¿ Qué posibilidades existen para transferir una licencia a un PC que no dispone de disquetera? Indicaciones de configuración: Desde hace algún tiempo, se fabrican PCs sin disquetera. Pero, para la instalación de algunos productos software de automatización se necesita una disquetera y sípoder instalar la llave de licencia que se suministra dentro de un disquete. Con el „Automation License Manager“, las licencias se pueden instalar de la siguiente forma en PCs sin disquetera: Medio de transporte © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Tipo de licencia 166 EKB Installer (por ejemplo, para el STEP 7 V5.2) Llave de licencia (por ejemplo, llave de licencia flotante para el STEP 7 V5.3) Disquetera externa con interfase USB X X USB Stick como medio de transporte desde un PC con disquetera a otro PC sin ella -- X Segundo PC con disquetera conectado a la red de la empresa y transferencia a través de dicha red X1) X1) Autorización Segundo PC con disquetera y transferencia Offline (consulte la ayuda Online del „Automation License Manager“) 1) X1) X1) El „Automation License Manager“ tiene que estar instalado en ambos PCs. Advertencia: La llave de licencia en el „Automation License Manager“ se reconoce por su número de licencia de 20 dígitos. La autorización tiene un número de licencia de 10 dígitos. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Top Level Intro This page is printed before a new top-level chapter starts Part VI 168 6 EKB Installer Deutsche Da es noch in das Stadium der Erarbeitung, so einige Funktionen mit den Bodenglatzen nicht vollstдndig zugдnglich sein oder erfьllt werden können{dürfen} Die gerade{Direkte} Aufzeichnung auf die Festplatte und Flash das Gedächtnis{Speicher} arbeitet. Auf Flash das Gedächtnis{Speicher} werden nur die langen Schlьssel - die ganze Liste etwas Minuten aufgezeichnet Man muЯ die gerade{direkte} Aufzeichnung der Schlьssel auf die Diskette ergдnzen Man muЯ die Liste der Schlьssel ausbessern{wiederherstellen} In die fernen, fernen Jahre hat der Siemens die Erarbeitung der Sicherung fьr seine{ihre} Softwareprodukte die Firma StopCopy betraut. Jene hat die Sicherung aufgrund der Schlьsseldateien, die auf dem besonderen Muster der formatierten gelben Diskette - von hier aus und die Bezeichnung aufgestellt sind, entwickelt. Dabei wurde behauptet, daЯ ist die Sicherung dabis zu sicher, daЯ " wird es sicher sein, Ihre Investitionen " zu behьten . GroЯe menschliche Danke den Spezialisten StopCopy fьr die durchgefьhrte Arbeit auf dem Gebiet der Bildung der Atmosphдre der Verfьgbarkeit der Produkte des Siemens den breiten Massen der Programmierer. Es hat die programm-und Hardwarebeschlьss sehr populдr und gefordert nach ganzer Welt gemacht, daЯ hat wьrdig erlaubt, mit allen Produzenten Automatik sogar auf ihr Territorium zu bewerben. Als Beispiel USA mit und ihrer B&R und General Electric zu nehmen. . . Und entsprechend hat gьltig die angelegten Investitionen aufbewahrt. Doch muЯ man das Eisen dennoch bei dem Siemens kaufen. Das gegebene{Vorliegende} Programm ist fьr die Installation der Schlьssel der Lizenzen im Falle, wenn vorbestimmt: Es hat " der schwarze Tag des Programmierers " - das System angebrochen ist zusammen mit allen Autorisationen hinuntergeflogen, und arbeiten es muЯ, sogar in den schwer zugдnglichen Bezirken; Wenn das neue heisse Produkt herausgekommen ist, gibt und des Geldes zu ihm die Leitung wдhrend nicht; Ist einfach Du willst fьr die gemeine Entwicklung zu studieren. Ist in Zusammenhang mit dem ProduktionsausstoЯ der Version ALM 3.0 - der Geschдftsfьhrer der Autorisation der Lizenzen entwickelt, nach dem, so genannt, " schnell kopiert " die langen Schlьssel der Autorisation aufgehцrt haben, wegen ihres Ignorierens diesen Geschдftsfьhrer der Autorisation zu arbeiten. " Schnell kopiert " waren die Schlьssel mцglich ist einfach, in den Katalog der Lizenzen C:\AX NF ZZ zu kopieren. Sie benutzten den dienstlichen "Eingang" im System der Autorisation ALM < v3.0, die mit der Abmeldung Step7 v5.4 SP1 bedeckt war. Es war die zusдtzliche Kodierung der Schlьssel auch verwendet, deshalb sind die neuen Schlьssel in ALM v2 nicht sichtbar. 2. Die neuen Schlьssel werden in den alten Versionen der Programme EKB_Rename, EKB_Backup und in diesem Programm auch EKB_Install <v.2007.03.03. Ich fordere nicht auf, die Software des Siemens in den eigennьtzigen Zielen zu benutzen. Die Programme fьr die Produktionsziele sollen in die Anschlage der Projekte im Grunde versetzt werden und auf das Geld des Kunden erworben werden. Wenig wem wird zum Kopf kommen, dem Kunden linke PCS7 mit den linken Schlьsseln und ohne Zertifikat auf die groЯe Produktion zu liefern. Und fьr die hдusliche Nutzung wahrscheinlich gibt es nichts schlechter des Gepolters mit den Lizenzdisketten. Es kamen die Fälle vor, wenn die alte Firmen-Gelbe Lizenz begann, bei dem Auslдnder mit dem © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Deutsche 169 Verschwinden der Schlьssel im fernen Gelände ohne Telefon und des Internets zu verderben. 6.1 IntoductionG Im Fenster des Programms sind gelegen{angeordnet;vorhanden}: Den Baum mit der Liste der Programme und die Tabelle mit der Liste der Schlьssel Das Feld fьr die Schlussfolgerung der Kommentare und die Informationsinformation Die Zeile der Wahl{Auswahl} der Sprache{Zunge} des Interfaces Die Zeile der Wahl{Auswahl} der Disk{Platte} fьr die Anlage{Installation} der Schlьssel und der Knopf der Erneuerung der Liste der Disks{Platten} Die Zeilen der Einfьhrung der Seriennummern{Serienzimmer} Die Zeile und der Knopf fьr die Suche des Schlьssels nach dem aufgegebenen Wort Der Knopf des Aufrufs des Fensters fьr die Arbeit mit den Weisen{Gestalten} Der gelben Disketten Das Feld der Wahl{Auswahl} der Prдferenzen als die Lizenz bei der Anlage{Installation} Die Knцpfe der Installation kurz, lang oder aller gewдhlten Schlьssel Wie kann die Trial License deaktiviert werden, wenn die Meldung erscheint, dass die Trial License abgelaufen ist, obwohl die Floating License installiert wurde? Welche Moglichkeiten gibt es, um Lizenz-Schlussel auf einem PC ohne Diskettenlaufwerk zu transferieren? © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 170 EKB Installer © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Deutsche 6.2 171 Wir werden die Schlьssel spдter aufstellen Wдhrend der Installation der Programme Simatic sagen wir uns von der Installation der Schlьssel los. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 172 6.3 EKB Installer Lizenz-Typ Lizenz-Typ ohne Beschrдnkung (Unlimited) Count relevant (Tag/s) Rental (Limited Hours, Limited Days, Expiration Date) Trial (Limited Days) Pay-per-use Demo (Limited Hours, Limited Days, Expiration Date) Power Pack Gьltigkeit bei ohne Beschrдnkung (Unlimited): Unbegrenzt © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Deutsche 173 bei Count relevant: Anzahl Tags bei Rental: Restlaufzeit + Einheit / Datum bei Trial: Restlaufzeit (Gesamtlaufzeit) bei Pay-per-use: laut Vertrag bei Demo: Restlaufzeit + Einheit / Datum bei Contract: laut Vertrag bei Upgrade: laut Vertrag bei Power Pack: laut Vertrag 6.4 Lizenznummer Seriennummer der Software-Lizenz (10-stellig = Autorisierung; 20-stellig = License Key) Sie konnen{durfen} diese Nummern nicht andern, und es gewдhren, dem Programm zu machen Oder Sie konnen{durfen} eine der Nummern aus der Liste der Nummern der Schlьssel, die auf Ihrem Computer eingerichtet sind, wдhlen. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 174 6.5 EKB Installer Required keys Die Liste der notwendigen Schlьssel fьr die eingerichteten Programme. Aus den tagen Schlьsseln stellen{einführen} Sie nur einen mit der notwendigen Menge{Anzahl} auf ist tag (das Beispiel fьr CFC auf der Zeichnung) Die Namen der fehlenden Schlьssel können Sie im Manager der Lizenzen ALM prдzisieren Der komplexe Schlьssel S7PROF* fьr die professionelle Version STEP7 kann anstelle 4 abgesonderter Schlьssel A17104 *, A1PLC_ *, A1S7GR *, A1SCL_* ausgenutzt werden. Der Schlьssel PCS7TT* fьr das Programm PCS7 kann{darf} anstelle des ganzen Satzes der Schlьssel ausgenutzt werden. Die Namen der fehlenden zusдtzlichen Schlьssel können Sie im Manager der Lizenzen ALM prдzisieren © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Deutsche 6.6 175 Installieren von License Keys Sie können{dürfen} einen Schlьssel oder die Gruppe der gewдhlten Schlьssel auf die erwдhnten flexiblen, harten{starken} Disks{Platten} oder дusserlich USB die Disk{Platte} (der Flash die Disk{Platte} oder der Flash die Karte) aufstellen{einführen}. Dabei sind etwas Varianten. Man kann eine der Varianten der Anlage{Installation} gewдhlt die Schlьssel wдhlen: 1. allen - kurz und lang 2. nur lang 3. nur kurz 4. die Anlage{Installation} mit der Prдferenz: werden lang aufgestellt{eingeführt} und wenn lang fьr den gewдhlten Typ der Lizenz nein, so wird die kurze Variante des Schlьssels aufgestellt{eingeführt}. werden kurz aufgestellt{eingeführt} und wenn kurz fьr den gewдhlten Typ der Lizenz nein, so wird die lange Variante des Schlьssels aufgestellt{eingeführt}. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 176 EKB Installer Dabei дndert sich auf dem Knopf der allgemeinen Anlage{Installation} das Bild entsprechend der Wahl {Auswahl}. Wenn Sie anschlieЯen schalten Sie oder die ersetzbaren Trдger wдhrend der Arbeit des Programms ab, so drücken{tasten} Sie fьr die Erneuerung der Liste der Trдger auf den Knopf ", die Liste der Disks {Platten} " Zu erneuern . Der von neuem angeschlossene Trдger wird in der Liste erscheinen{entstehen}. Nach der Anlage{Installation} werden die entsprechenden Namen der Schlьssel angestrichen sein Wenn der Schlьssel auf der Disk{Platte} schon eingerichtet ist, so wird das Fenster mit der Bitte erscheinen{entstehen}, die Anlage{Installation} ьber existierend zu bestдtigen. Wenn Sie echten{originellen} Schlьssel haben, so muЯ man sich natьrlich vom Ьberspielen lossagen. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Deutsche 6.7 177 Yellow Disk Mit Hilfe diesen Dienstprogrammes kann man die Gelbe Diskette aus den Weisen{Gestalten} einiger Typen schaffen: IMA, IMZ* - WinImage IMG - FloppyImage BIN - FDA (Floppy Disk Analyzator for DOS) IMZ Die Weisen{Gestalten} im Format IMZ (WinImage) muЯ man in die Datei mit der Erweiterung {Ausbau} IMA vorläufig{vorher} auspacken. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 178 EKB Installer Nach der Vollendung der Aufzeichnung wird die "Lizenzbahn{"Lizenzweg} aufgezeichnet sein. Fьr den Augenblick werden vom Siemens fьr dieses Ziel{Zweck} die Bähne{Weg} von 71 bis zu 79 verwendet. Wenn Sie die Gelbe Diskette in anderem Programm (in selb WinImage oder FloppyImage) schon geschaffen haben, Jenes können{dürfen} Sie die "Lizenzbahn{"Lizenzweg}, gedrückt{getastet} auf den entsprechenden Käfig{Zelle} abgesondert abgesondert aufzeichnen. Die Richtigkeit{Regelmäßigkeit} der Bildung{Schaffung} der Diskette kann man im Programm den Manager{Geschäftsführer} der Lizenzen AutorsW oder ALM prьfen, Gewдhlt die Prьfung der Ganzheit eines beliebigen Schlьssels. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Deutsche 179 Nach dem charakteristischen{charaktervollen} "Knirschen" des Schrittmotors der Umstellung des Kopfes kann man ьber den Erfolg der Prozedur auch bestimmen. Wenn Sie das "Knirschen" - nicht hцren werden es bedeutet die Diskette war falsch geschaffen oder es war die nцtige Bahn{Weg} nicht aufgezeichnet. In diesem Fall können{dürfen} Sie die Bähne{Weg} von 71 bis zu 79 konsequent aufzeichnen und in die Ganzheit im Manager{Geschäftsführer} der Lizenzen prьfen. Fьr das Ablesen der Firmen-Gelben Diskette in die Datei - Weise können{dürfen} Sie den Knopf " Read Yellow Disk " ausnutzen{verwenden} oder durch das Programm WinImage rechnen. Bei dem Versuch der Lektüre{Vorlesung} der "lizenzbahn{"lizenzwegs} WinImage wird die Warnung vor dem Fehler der Lektüre{Vorlesung} ausstellen. Drücken{tasten} Sie Knopf " ignorieren " fьr die Fortsetzung der Bildung{Schaffung} der Weise{Gestalt}. Sie können{dürfen} die Nummer{Zimmer} dieser Bahn{Wegs} fьr die Formatierung in unserem Programm behalten. 6.8 Unknow keys Example of unknow keys 6.9 Wie kann die Trial License deaktiviert werden Wie kann die Trial License deaktiviert werden, wenn die Meldung erscheint, dass die Trial License abgelaufen ist, obwohl die Floating License installiert wurde? http://support.automation.siemens.com/WW/view/en/24200966 Anleitung: Die Trial License ist für eine zeitlich beschränkte Nutzung der SIMATIC Software z.B. für Tests und nach der Aktivierung dieser License ist sie für maximal 14 Tage gültig. Wenn Sie nach dem Ablauf dieser Zeit eine Lizenz für eine zeitlich unbegrenzte Nutzung (Single-, Floating- oder UpgradeLicense) installieren und nach der Installation trotzdem die Meldung erhalten, dass die Trial License abgelaufen ist, empfehlen wir Ihnen, die Trial License im Ordner "AX NF ZZ" zu löschen: Vorgehensweise zum Löschen einer Trial License: 1. Öffnen Sie in MS Windows den ALM über "Start > SIMATIC > License Management > Automation License Manager" und markieren Sie mit dem Cursor das Laufwerk (z.B. "C"), auf dem Ihre Lizenzen installiert sind. Im rechten Fenster des Automation License Managers erscheint dann die Tabelle mit den © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 180 EKB Installer installierten Lizenzen. Für die Ansicht der Lizenzen benötigen Sie den Dateinamen (License Key) und die 20-stellige Lizenznummer. Sollten diese Spalten noch nicht eingeblendet sein, so öffnen Sie über "Ansicht > Definieren..." den Dialog "Ansicht definieren". Wählen Sie im unteren Teil dieses Dialoges im Register "Spalten" die "License Key" und die "Lizenznummer". Bild 01 Tragen Sie anschließend einen Namen unter "Ansicht bearbeiten:" ein und klicken Sie auf die Schaltfläche "Ü bernehmen". Nach der Bestätigung mit OK erscheinen die Spalten "License Key" und "Lizenznummer" im Automation License Manager. 2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Deutsche 181 Markieren Sie im Explorer das Verzeichnis "AX NF ZZ" auf Ihrer Festplatte bzw. im Laufwerk "C", sodass im rechten Fensters des Explorers die Dateinamen der Lizenzen erscheinen. Sollte das Verzeichnis "AX NF ZZ" bzw. die Dateien in diesem Verzeichnis nicht sichtbar sein, so öffnen Sie den Dialog "Extras > Ordneroptionen..." und wählen Sie das Register "Ansicht": deaktivieren Sie hier die Option "Geschützte Systemdateien ausblenden (empfohlen)" und aktivieren Sie die Option "Alle Dateien und Ordner anzeigen". Klicken Sie anschließend auf die Schaltfläche "Ü bernehmen" und bestätigen Sie mit OK. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 182 EKB Installer Bild 02 Das Verzeichnis "AX NF ZZ" wird dann im Explorer angezeigt. 3 Vergleichen Sie nun im Automation License Manager den Dateinamen (License Key) der Trial License mit dem Dateinamen im Order "AX NF ZZ". Ü ber die eingestellte Ansicht im Automation License Manager ermitteln Sie für die zu löschende Trial License den Dateinamen (Bild 03), den Sie dann im Ordner "AX NF ZZ" finden. Bild 03 4 Markieren Sie die gefundene Trial License im Verzeichnis "AX NF ZZ" und klicken Sie auf die rechte Maustaste. Klicken Sie im darauf folgenden Kontextmenü auf "Löschen". Nach dem Löschen wird die oben beschriebene Meldung nicht mehr erscheinen. 6.9.1 Install Trial keys Wдhrend der Anlage{Installation} des zeitweiligen Schlьssels in den Verzeichnissen Windows und Windows\System32 werden die Verzeichnisse attis mit einer leeren Datei geschaffen. Der zeitweilige Schlьssel SITTA*.ekb wird in das Verzeichnis C:\AX NF ZZ aufgestellt{eingeführt} © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Deutsche 183 See Remove Trial keys 6.9.2 Remove Trial keys Fьr einige Programme kann man die zeitweiligen Schlьssel befristet von einigen Stunden bis zu dem Jahr der Arbeit aufstellen{einführen}. Nach dem Abschluss{Endung} des Termines{Frist} der Arbeit ist nцtig es, die zeitweiligen Schlьssel und ihre Spuren zu lцschen. Es sind die Probleme bei der Arbeit der normalen Schlьssel andernfalls mцglich. Auch muЯ man das Verzeichnis in das Verzeichnis System32 lцschen In diesem Verzeichnis befindet sich die leere Datei. 6.10 Siemens.exe Fьr die Anlage{Installation} der kurzen Schlьssel aus dem Satz kann man das Programm Siemens_exe ausnutzen{verwenden}. Kopieren Sie in das Verzeichnis mit dem Programm die geforderten Schlьssel (nicht mehr als 100 Stьcke einmalig) und starten Sie das Programm. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 184 EKB Installer Wenn es im Verzeichnis mit Siemens_exe keine Schlьssel gibt, so wird bei dem Start die nдchste Mitteilung herausgeführt sein © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Deutsche 6.11 185 Lizenz-Schlussel auf einem PC ohne Diskettenlaufwerk zu transferieren Welche Möglichkeiten gibt es, um Lizenz-Schlüssel auf einem PC ohne Diskettenlaufwerk zu transferieren? Konfigurationshinweise: Seit einiger Zeit werden auch Rechner ohne Diskettenlaufwerk hergestellt. Für die Installation von einigen Automatisierungs-Softwareprodukten ist allerdings ein Diskettenlaufwerk für die Installation der auf Diskette ausgelieferten Lizenz-Schlüssel erforderlich. Mit dem Automation License Manager können, bei einem PC ohne Diskettenlaufwerk, die Lizenzen über die folgenden Wege installiert werden: Lizenz-Schlüssel Typ Transportmedium Autorisie License-Key rung (z.B. Floating License (z.B. STEP 7 Key STEP 7 V5.3) V5.2) Externes Diskettenlaufwerk mit USB-Schnittstelle X X USB Stick als Transfermedium von einem Rechner mit Diskettenlaufwerk zu einem Rechner ohne Diskettenlaufwerk -- X Zweitrechner mit Diskettenlaufwerk am Firmennetz und Transfer 1) X über das Netzwerk X1) Zweitrechner mit Diskettenlaufwerk und Offlinetransfer (siehe Hilfe des Automation License Managers) X1) 1) X1) Der Automation License Manager muss auch auf beiden Rechnern installiert sein. Hinweis: Einen License Key erkennen Sie im Automation License Manager an der zwanzigstelligen Lizenznummer. Eine Autorisierung besitzt eine zehnstelligen Lizenznummer. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 186 EKB Installer © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Top Level Intro This page is printed before a new top-level chapter starts Part VII 188 7 EKB Installer Portuguese Como ele em uma etapa do desenvolvimento algumas funções nã o podem ser completamente acessíveis ou ser executadas com falhas Registro direto em um disco rígido e trabalhos de memória de Relâmpago. Na memória de Relâmpago chaves longas - a lista alguns minutos introduzem o nome só É necessário acrescentar o registro direto de chaves em um disquete É necessário corrigir para a lista de chaves Em anos distantes, distantes Siemens cobrou o desenvolvimento da proteçã o dos produtos de software à corporaçã o StopCopy. Isto desenvolveu a proteçã o com base nos arquivos-chave colocados na imagem especial ao disquete Amarelo formatado - daqui e o nome. Assim afirmado, aquela proteçã o até isto é fiável, isto "será fiável conservar os seus investimentos". O grande ser humano agradece peritos StopCopy pela operaçã o feita no campo da criaçã o de uma atmosfera da disponibilidade de produtos de Siemens a largas massas de programadores. Fez programa e soluções de hardware muito popular e exigido no mundo inteiro, que permitiu competir apropriadamente a outros fabricantes da automaçã o até no seu território. Tomar para um exemplo dos EUA com e eles B&R e General Elétrico... E conseqüentemente realmente salvou em cima dos investimentos aninhados. De fato o ferro igualmente deve ser comprado todos de Siemens. O programa dado é destinado para a instalaçã o de chaves de licenças em caso de, quando: Lá ocorreu "um dia chuvoso do programador" - o sistema tem flied em conjunto com todas as autorizações, e trabalhar é necessário, até em áreas remotas; Quando houve um novo produto quente, e as cabeças ainda nã o dã o o dinheiro para ele ; Simplesmente você deseja estudar para o desenvolvimento geral . É desenvolvido com relaçã o ao lançamento da versã o ALM 3.0 - a Autorizaçã o Autoriza o Gerente depois quem, assim chamado, "fastcopy" chaves longas da autorizaçã o deixaram de trabalhar por causa do que nã o ignoram por este Authorizator. As chaves de "Fastcopy" podem ser copiadas simplesmente no diretório de licenças C: \AX NF ZZ. Eles usaram "o buraco" auxiliar no sistema da autorizaçã o ALM <v3.0 que foram cobertos com a produçã o Step7 v5.4 SP1. Também codificaçã o adicional das chaves, as chaves, por isso, novas foram aplicadas nã o sã o visíveis em ALM v2.2. As novas chaves sã o incorretamente expostas em velhas versões de programas EKB_Rename, EKB_Backup e EKB_Install <v.2007.03.03. Nã o chamo para usar um software de Siemens nos objetivos mercenários. Os programas dos objetivos industriais basicamente devem ser penhorados em estimativas de projetos e ser ganhados no dinheiro do cliente. Muito poucas pessoas virã o para uma cabeça para pôr Ïdeixado do cliente PCS7 com as chaves esquerdas e sem o certificado em grande produçã o. E para o uso de casa provavelmente nã o há nada o pior espalhafato com disquetes de licença. Houve casos quando o desgastado a licença Amarela firme começou a ser chovida para Intourist com a Senhorita de chaves em lugares remotos distantes sem telefone e a Internet. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Portuguese 7.1 189 Introducion Em uma janela do programa sã o localizados: Árvore com a lista de programas e a tabela com a lista de chaves Campo de uma conclusã o de comentários e a informaçã o sobre ajuda Linha de uma escolha de língua da interface Linha de uma escolha de um disco de instalaçã o de chaves e o botã o de atualizaçã o da lista de discos Linhas de entrada de números de série Linha e o botã o de pesquisa de uma chave pela palavra de jogo O botã o de uma chamada de uma janela de trabalho com imagens de disquetes Amarelos Campo de uma escolha de preferê ncias de tipo da licença em instalaçã o Botões de instalaçã o curta, muito tempo ou todas as chaves escolhidas Selecione tipos-chave para instalam © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 190 7.2 EKB Installer We shall install keys later During installation of programs Simatic it is refused installation of keys. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Portuguese 7.3 191 Numero de Licenca Número de Licença O número de licença é o identificador único de uma licença. Há 2 linhas da entrada de números de série, assim chamado ID KHE, normalmente especificadas em disquetes de licença amarelos e certificados aplicados. 10 número simbólico é destinado para chaves curtas. 20 número simbólico é destinado para chaves longas. Você nã o pode modificar esses números, e dá-lo para fazer ao programa ou selecione um dos números de série disponíveis de chaves instaladas na caixa de lista caio. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 192 7.4 EKB Installer Required keys A lista de chaves necessárias dos programas instalados. Da etiqueta as chaves instalam só um com a quantidade necessária de etiquetas (um exemplo de CFC na figura). Você pode especificar nomes de chaves ausentes no gerente de licenças ALM S7PROF*-chave complexo da versã o STEP7 profissional pode ser usado em vez de 4 chaves separadas A17104 *, A1PLC_ *, A1S7GR *, A1SCL_*. PCS7TT*-chave do programa PCS7 pode ser usado em vez do jogo completo inteiro de chaves. Você pode especificar nomes de faltar a chaves adicionais no gerente de licenças ALM © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Portuguese 7.5 193 Instalacao de Chaves de Licenca Você pode estabelecer {instalam} uma chave ou o grupo das chaves escolhidas nos discos flexíveis, rígidos especificados ou USB externo um disco (pau de Relâmpago ou Flashcard em cardreader). Assim há algumas variantes. É possível escolher uma de variantes da instalaçã o chaves escolhidas: 1. Todos - curto e longo 2. Só muito tempo 3. Só curto 4. Instalaçã o com preferê ncia: Sã o instalados muito tempo e se nã o estiver presente muito tempo para o tipo escolhido da licença a variante curta de uma chave é instalada. Sã o instalados curtos e se nã o estiver presente curto para o tipo escolhido da licença a variante longa de uma chave é instalada. Selecione o tipo de chaves © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 194 EKB Installer Assim no botã o da instalaçã o geral o quadro segundo uma escolha varia. Se você une conecta ou desconecta transportadoras substituíveis durante o trabalho do programa para atualizar a lista de transportadoras prensa {de portadores} o botã o "para atualizar a lista de discos". A transportadora novamente unida{conectada} aparecerá na lista. Depois que a correspondê ncia de instalaçã o {que encontra} os nomes das chaves será pintada Se a chave já for instalada em um disco haverá uma janela com o pedido para confirmar a instalaçã o em cima de disponível. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Portuguese 7.6 195 Siemens.exe For installation of short keys from a set it is possible to use program Siemens.exe. Copy in the catalogue with the program demanded keys (no more than 100 keys lumpsum) and start the program. If in the catalogue with Siemens_exe there are no keys at start the following message will be show. 7.7 Nao conhece chaves O exemplo de não conhece chaves © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Top Level Intro This page is printed before a new top-level chapter starts Part VIII 198 8 EKB Installer Chinese =======NEWS ====== НОВОСТИ ========= 19 Mar 2010 12:53 plc.net.ru was closed by hoster, so we had to move to new domain ===> Currently it is http:// plcforum.uz.ua in test mode (possible SQL problems) Временно открыли заменитель-зеркало http://plcforum.uz.ua в тестовом режиме (возможны проблемы с SQL ) ======= OLD INFORMATION ====== СТАРАЯ ИНФОРМАЦИЯ =========== 15 Mar 2010 http://PLC.NET.RU closed by hoster wait new name use torrents links http://rutracker.org/forum/viewforum.php?f=1192 ================================================= I do not know the Chinese language. If you really wish to have the version in the Chinese language please write to me translation of words into the Chinese language. I have found this fake of resources in the Chinese language. Official version © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Chinese thanks to ifdog © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 199 Top Level Intro This page is printed before a new top-level chapter starts Part IX 202 9 EKB Installer Key list A1P7P250 A1P7P261 SIFLA1P7P20601 A1P7P350 A1P7P361 SIFLA1P7P30601 A1P7P150 @PCS7 Full Client Access v5.0 @PCS7 Full Client Access v6.1 @PCS7 Server to Server Communication v5.0 @PCS7 Server to Server Communication v6.1 @PCS7 Web Right Access v5.0 A1P7P161 SIFLA1P7P10601 @PCS7 Web Right Access v6.1 ICRU0063 SIFLICRU000603 850 Credits Upgrade v6.3 ICRU0063 SIFLICRU000603 850 Credits Upgrade v6.3 A5ADS340 ADDM Server 200 Users v4.0 A5ADS240 ADDM Server 50 Users v4.0 A5ADS140 ADDM Server Base v4.0 A5ADC140 ADDM Single User v4.0 A1ESAS61 SIFLA1ESAS0601 Asset ES v6.1 A1ESAS70 SIFLA1ESAS0700 Asset ES v7.0 A1ESAS71 SIFLA1ESAS0701 Asset ES v7.1 RTASS161 SIFLRTASS10601 Asset RT (128) v6.1 RTASS170 SIFLRTASS10700 Asset RT (128) v7.0 RTASS171 SIFLRTASS10701 Asset RT (128) v7.1 RTASS361 SIFLRTASS30601 Asset RT 1024 Tags v6.1 RTASS370 SIFLRTASS30700 Asset RT 1024 Tags v7.0 RTASS371 SIFLRTASS30701 Asset RT 1024 Tags v7.1 RTASS461 SIFLRTASS40601 Asset RT 2048 Tags v6.1 RTASS470 SIFLRTASS40700 Asset RT 2048 Tags v7.0 RTASS471 SIFLRTASS40701 Asset RT 2048 Tags v7.1 RTASS261 SIFLRTASS20601 Asset RT 512 Tags v6.1 RTASS270 SIFLRTASS20700 Asset RT 512 Tags v7.0 RTASS271 SIFLRTASS20701 Asset RT 512 Tags v7.1 RTASS561 SIFLRTASSA0601 Asset RT unlimited v6.1 RTASS570 SIFLRTASSA0700 Asset RT unlimited v7.0 RTASS571 SIFLRTASSA0701 Asset RT unlimited v7.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list IFNDH061 SIFLICLIH70601 Backup Foundation for Historian Standard v6.1 IFNDH063 SIFLICLIH70603 Backup Foundation for Historian Standard v6.3 A1BUN070 SIFLA1BUN00700 BATCH 10 UNITs v7.0 A1BUN670 SIFLA1BUN60700 BATCH 100 UNITs v7.0 A1BUN270 SIFLA1BUN20700 BATCH 20 UNITs v7.0 A1BUN470 SIFLA1BUN40700 BATCH 40 UNITs v7.0 A1BFCP03 BATCH flexible CP v3.x A1BFCP60 BATCH flexible CP v6.0 A1BFCS03 BATCH flexible CS v3.x A1BFCS60 BATCH flexible CS v6.0 A1BFCV03 BATCH flexible CV v3.x A1BFCV60 BATCH flexible CV v6.0 A1BFRS03 BATCH flexible RS v3.x A1BSP260 BATCH Server1 1800 Obj V6.0 v6.0 A1BSP160 BATCH Server1 600 Obj V6.0 v6.0 A1BSP461 SIFLA1BSP40601 BATCH Server1 600 Obj V6.1 v6.1 A1BSP470 SIFLA1BSP40700 BATCH Server1 600 Obj V7.0 v7.0 A1BSP471 SIFLA1BSP40701 BATCH Server1 600 Obj V7.1 v7.1 A1BSP661 SIFLA1BSP60601 BATCH Server2 1800 Obj V6.1 v6.1 A1BSP670 SIFLA1BSP60700 BATCH Server2 1800 Obj V7.0 v7.0 A1BSP671 SIFLA1BSP60701 BATCH Server2 1800 Obj V7.1 v7.1 BATCH Server9 unlim V6.0 v6.0 A1BSP960 A1BSP961 SIFLA1BSP90601 BATCH Server9 unlim V6.1 v6.1 A1BSP970 SIFLA1BSP90700 BATCH Server9 unlim V7.0 v7.0 A1BSP971 SIFLA1BSP90701 BATCH Server9 unlim V7.1 v7.1 A1BUN970 SIFLA1BUN90700 BATCH unlimited v7.0 A1BAPC05 BF API (Client) v5.x A1BAPS05 BF API (Server) v5.x A1BAPS60 BF API (Server) V6.0 v6.0 A1BAPS61 SIFLA1BAPS0601 BF API (Server) V6.1 v6.1 A1BAPS70 SIFLA1BAPS0700 BF API (Server) V7.0 v7.0 A1BAPS71 SIFLA1BAPS0701 BF API (Server) V7.1 v7.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 203 204 EKB Installer A1BAPI60 BF API V6.0 v6.0 A1BAPI61 SIFLA1BAPI0601 BF API V6.1 v6.1 A1BAPI70 SIFLA1BAPI0700 BF API V7.0 v7.0 A1BAPI71 SIFLA1BAPI0701 BF API V7.1 v7.1 A1BCON05 BF Batch Control (Client) v5.x A1BPLA05 BF Batch Planing (Client) v5.x A1BPLA60 BF Batch Planning V6.0 v6.0 A1BPLA61 SIFLA1BPLA0601 BF Batch Planning V6.1 v6.1 A1BPLA70 SIFLA1BPLA0700 BF Batch Planning V7.0 v7.0 A1BPLA71 SIFLA1BPLA0701 BF Batch Planning V7.1 v7.1 BF BatchCC V6.0 v6.0 A1BBCC60 A1BBCC61 SIFLA1BBCC0601 BF BatchCC V6.1 v6.1 A1BBCC70 SIFLA1BBCC0700 BF BatchCC V7.0 v7.0 A1BBCC71 SIFLA1BBCC0701 BF BatchCC V7.1 v7.1 A1BFOR05 BF Formulas (Server) v5.x A1BFOR60 BF Formulas V6.0 v6.0 A1BFOR61 SIFLA1BFOR0601 BF Formulas V6.1 v6.1 A1BFOR70 SIFLA1BFOR0700 BF Formulas V7.0 v7.0 A1BFOR71 SIFLA1BFOR0701 BF Formulas V7.1 v7.1 BF Multi level Recipe V6.0 v6.0 A1BHIE60 A1BHIE61 SIFLA1BHIE0601 BF Multi level Recipe V6.1 v6.1 A1BHIE70 SIFLA1BHIE0700 BF Multi level Recipe V7.0 v7.0 A1BHIE71 SIFLA1BHIE0701 BF Multi level Recipe V7.1 v7.1 A1BHIE05 BF Multi-level Recipe (Server) v5.x A1BREC05 BF Recipe System (Client) v5.x A1BREC60 BF Recipe System V6.0 v6.0 A1BREC61 SIFLA1BREC0601 BF Recipe System V6.1 v6.1 A1BREC70 SIFLA1BREC0700 BF Recipe System V7.0 v7.0 A1BREC71 SIFLA1BREC0701 BF Recipe System V7.1 v7.1 A1BPRO05 BF Reports (Server) v5.x A1BROP60 BF ROP Lib V6.0 v6.0 BF ROP Lib V6.1 v6.1 A1BROP61 SIFLA1BROP0601 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list A1BROP70 SIFLA1BROP0700 BF ROP Lib V7.0 v7.0 A1BROP71 SIFLA1BROP0701 BF ROP Lib V7.1 v7.1 A1BSER05 BF Server System v5.x A1BSP060 BF Server0 150 Obj V6.0 v6.0 A1BSP061 SIFLA1BSP00601 BF Server0 150 Obj V6.1 v6.1 A1BSP070 SIFLA1BSP00700 BF Server0 150 Obj V7.0 v7.0 A1BSP071 SIFLA1BSP00701 BF Server0 150 Obj V7.1 v7.1 A1BSP261 SIFLA1BSP20601 BF Server0 300 Obj V6.1 v6.1 A1BSP270 SIFLA1BSP20700 BF Server0 300 Obj V7.0 v7.0 A1BSP271 SIFLA1BSP20701 BF Server0 300 Obj V7.1 v7.1 A1BCLA05 BF Unit Classes (Server) v5.x ATDSIS04 Braumat SISTAR V4.x/V5.x / Windows NT v4.x E37SCP01 Braumat SoftCP(Ind.Ethernet) V1.x / Windows NT v1.x CECLT161 SIFLCECLT10601 CEMAT Client v6.1 CEENG161 SIFLCEENG10601 CEMAT Engineering v6.1 A1CEMC52 CEMAT OS Software Multiclient v5.2 A1CERT52 CEMAT OS Software Runtime v5.2 CESVR161 SIFLCESVR10601 CEMAT Server Redundancy 3 Clients v6.1 CESVR261 SIFLCESVR20601 CEMAT Server Redundancy 6 Clients v6.1 CESVR361 SIFLCESVR30601 CEMAT Server Redundancy 9 Clients v6.1 CESVR961 SIFLCESVR90601 CEMAT Server Redundancy Unlimited Clients v6.1 CESST161 SIFLCESST10601 CEMAT Single Station 3 Clients v6.1 CESST261 SIFLCESST20601 CEMAT Single Station 6 Clients v6.1 A1CFCU61 SIFLA1CFCU0601 CFC Unlimited Tags v6.1 A1CFCU70 SIFLA1CFCU0700 CFC Unlimited Tags v7.0 A1CFCU71 SIFLA1CFCU0701 CFC Unlimited Tags v7.1 A1CFCA03 CFC V3.x v3.x A1CFCA04 CFC V4.x v4.x A1CFCA51 CFC V5.1 v5.1 A1CFC351 CFC V5.1 (1500) v5.1 A1CFC151 CFC V5.1 (250) v5.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 205 206 EKB Installer A1CFC451 CFC V5.1 (3000) v5.1 A1CFC251 CFC V5.1 (750) v5.1 A1CFCA52 CFC V5.2 v5.2 A1CFC352 CFC V5.2 (1500) v5.2 A1CFC152 CFC V5.2 (250) v5.2 A1CFC452 CFC V5.2 (3000) v5.2 A1CFC252 CFC V5.2 (750) v5.2 A1CFCA05 CFC V5.x v5.x A1CFCA60 CFC V6.0 v6.0 A1CFC160 CFC V6.0 (250) v6.0 A1CFC360 CFC V6.0 (2000) v6.0 A1CFC460 CFC V6.0 (3000) v6.0 A1CFC560 CFC V6.0 (5000) v6.0 A1CFC561 SIFLA1CFC50601 CFC V6.1 (1000) v6.1 A1CFC761 SIFLA1CFC70601 CFC V6.1 (2000) v6.1 A1CFC161 SIFLA1CFC10601 CFC V6.1 (250) v6.1 A1CFC361 SIFLA1CFC30601 CFC V6.1 (500) v6.1 A1CFC961 SIFLA1CFC90601 CFC V6.1 (3000) v6.1 A1CFCD61 SIFLA1CFCD0601 CFC V6.1 (5000) v6.1 A1CFCS61 SIFLA1CFCS0601 CFC V6.1 STEP 7 - Option v6.1 A1CFC570 SIFLA1CFC50700 CFC V7.0 (1000) v7.0 A1CFC770 SIFLA1CFC70700 CFC V7.0 (2000) v7.0 A1CFC170 SIFLA1CFC10700 CFC V7.0 (250) v7.0 A1CFC370 SIFLA1CFC30700 CFC V7.0 (500) v7.0 A1CFC970 SIFLA1CFC90700 CFC V7.0 (3000) v7.0 A1CFCD70 SIFLA1CFCD0700 CFC V7.0 (5000) v7.0 A1CFCM70 SIFLA1CFCM0700 CFC V7.0 Simotion v7.0 A1CFCN70 SIFLA1CFCN0700 CFC V7.0 Sinamics v7.0 A1CFCS70 SIFLA1CFCS0700 CFC V7.0 STEP 7 Option v7.0 A1CFC571 SIFLA1CFC50701 CFC V7.1 (1000) v7.1 A1CFC771 SIFLA1CFC70701 CFC V7.1 (2000) v7.1 A1CFC171 SIFLA1CFC10701 CFC V7.1 (250) v7.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list A1CFC371 SIFLA1CFC30701 CFC V7.1 (500) v7.1 A1CFC971 SIFLA1CFC90701 CFC V7.1 (3000) v7.1 A1CFCD71 SIFLA1CFCD0701 CFC V7.1 (5000) v7.1 A1CFCM71 SIFLA1CFCM0701 CFC V7.1 Simotion v7.1 A1CFCN71 SIFLA1CFCN0701 CFC V7.1 Sinamics v7.1 A1CFCS71 SIFLA1CFCS0701 CFC V7.1 STEP 7 Option v7.1 A1COMP30 Computing V3.x v3.0 A1DSYS61 D7-SYS v6.1 v6.1 A1DSYS62 SIFLA1DSYS0602 D7-SYS v6.2 v6.2 A1DSYS70 SIFLA1DSYS0700 D7-SYS v7.0 v7.0 A1DSYS71 SIFLA1DSYS0701 D7-SYS v7.1 v7.1 A5ADS150 Data Management Server V5 v5.0 A5ADC150 Data Management Single User V5 v5.0 Device Drivers S7DOS v7.0 DOCPRO V3.x v3.x SS7DOS70 SIFLSS7DOS0700 A1DOCP03 A1DOCP51 SIFLA1DOCP0501 DOCPRO V5.1 v5.1 A1DOCP54 SIFLA1DOCP0504 DOCPRO v5.4 v5.4 A1DOCP05 DOCPRO V5.x v5.x A9SOLD90 DP/OLE-Manager/Windows v9.0 A9SD52N0 DP-5412/Windows NT vN.0 A1DRVB51 Driver Blocks V5.1 v5.1 A1DRVB52 Driver Blocks V5.2 v5.2 A1DRVB53 Driver Blocks V5.3 v5.3 A1DRVB54 Driver Blocks V5.4 v5.4 A9SODXN0 DX OPC-Server V6.3 vN.0 A1ESIG10 Electronic Signature v1.0 A1ESIG12 SIFLA1ESIG0102 Electronic Signature 1.2 v1.2 A1ESIG13 SIFLA1ESIG0103 Electronic Signature 1.3 v1.3 A9FCBA50 FuzzyControl++ Base v5.0 A9FCCF50 FuzzyControl++ CFC v5.0 A9FCIE50 FuzzyControl++ Industrial Ethernet v5.0 A9FCPB50 FuzzyControl++ PROFIBUS v5.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 207 208 EKB Installer A1581A03 GRAPH 5/II V6.x v3.x A1G5II70 GRAPH 5/II V7.x v7.0 ICLIH761 SIFLICLIH70601 Historian Standard Client (25) v6.1 ICLIH763 SIFLICLIH70603 Historian Standard Client (25) v6.3 HMI Control VS720 V1.0 v1.0 A1HCTR10 A1IEA_61 SIFLA1IEA_0601 IEA PCS 7 6.1 v6.1 A1IEA_70 SIFLA1IEA_0700 IEA PCS 7 7.0 v7.0 A1IEA_71 SIFLA1IEA_0701 IEA PCS 7 7.1 v7.1 A1IEA_60 IEA PCS 7 6.0 v6.0 A1IMAP20 iMap v2.0 iMap v3.0 A9SCBAN0 Ind. Ethernet PN CBA OPC-Server V6.3 vN.0 A6ICON10 IP-Connect @PCS7 IP21Feeder v1.0 A6TAGC10 IP-Connect @PCS7 TagConvert v1.0 A1IMAP30 SIFLA1IMAP0300 ICRE0461 SIFLICRE040601 IT 200000 Credits v6.1 ICRE0463 SIFLICRE040603 IT 200000 Credits v6.3 ICFR0061 SIFLICFR000601 IT 21cfr11 v6.1 ICFR0063 SIFLICFR000603 IT 21cfr11 v6.3 IAMG0661 SIFLIAMG060601 IT Alarm Manager (30000) v6.1 IAMG0663 SIFLIAMG060603 IT Alarm Manager (30000) v6.3 IAMD0061 SIFLIAMD000601 IT Alarm Manager Display v6.1 IAMD0063 SIFLIAMD000603 IT Alarm Manager Display v6.3 IFNDP061 SIFLIFNDP00601 IT Backup Foundation for Production Suite v6.1 IFNDP063 SIFLIFNDP00603 IT Backup Foundation for Production Suite v6.3 ICBE0061 SIFLICBE000601 IT CAB Engineering v6.1 ICBE0063 SIFLICBE000603 IT CAB Engineering v6.3 ICSV0061 SIFLICSV000601 IT Compliance Services v6.1 ICSV0063 SIFLICSV000603 IT Compliance Services v6.3 IDIS0061 SIFLIDIS000601 IT Data Integration Service v6.1 IDIS0063 SIFLIDIS000603 IT Data Integration Service v6.3 IDR10061 SIFLIDR1000601 IT Driver 3964R v6.1 IDR10063 SIFLIDR1000603 IT Driver 3964R v6.3 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list IDR20061 SIFLIDR2000601 IT Driver Modbus RTU v6.1 IDR20063 SIFLIDR2000603 IT Driver Modbus RTU v6.3 IDR30061 SIFLIDR3000601 IT Driver OPC Client v6.1 IDR30063 SIFLIDR3000603 IT Driver OPC Client v6.3 IXLS0061 SIFLIXLS000601 IT Excel Add-in v6.1 IXLS0063 SIFLIXLS000603 IT Excel Add-in v6.3 IGUD0061 SIFLIGUD000601 IT GUI Development v6.1 IGUD0063 SIFLIGUD000603 IT GUI Development v6.3 IGUR0061 SIFLIGUR000601 IT GUI Run-Time v6.1 IGUR0063 SIFLIGUR000603 IT GUI Run-Time v6.3 IHDD0061 SIFLIHDD000601 IT Historian Data Display v6.1 IHDD0063 SIFLIHDD000603 IT Historian Data Display v6.3 IHBU0061 SIFLIHBU000601 IT Hot Backup for Process Tags v6.1 IHBU0063 SIFLIHBU000603 IT Hot Backup for Process Tags v6.3 IIMC0061 SIFLIIMC000601 IT IMC v6.1 IIMC0063 SIFLIIMC000603 IT IMC v6.3 IISSI361 SIFLIISSI30601 IT Interspec Advanced Server v6.1 IISSI363 SIFLIISSI30603 IT Interspec Advanced Server v6.3 IISCI761 SIFLIISCI70601 IT Interspec Client (25) v6.1 IISCI763 SIFLIISCI70603 IT Interspec Client (25) v6.3 IISSI061 SIFLIISSI00601 IT Interspec Standard Server v6.1 IISSI063 SIFLIISSI00603 IT Interspec Standard Server v6.3 IMAM0061 SIFLIMAM000601 IT Material Manager v6.1 IMAM0063 SIFLIMAM000603 IT Material Manager v6.3 IMMQ0061 SIFLIMMQ000601 IT Microsoft Message Queue Connector v6.1 IMMQ0063 SIFLIMMQ000603 IT Microsoft Message Queue Connector v6.3 IMQS0061 SIFLIMQS000601 IT MQ Series Connector v6.1 IMQS0063 SIFLIMQS000603 IT MQ Series Connector v6.3 IOEE0061 SIFLIOEE000601 IT OEE/DTM v6.1 IOEE0063 SIFLIOEE000603 IT OEE/DTM v6.3 IOEE0861 SIFLIOEE080601 IT OEE/DTM (800) v6.1 IOEE8061 SIFLIOEE800601 IT OEE/DTM (800) v6.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 209 210 EKB Installer IOEE0863 SIFLIOEE080603 IT OEE/DTM (800) v6.3 IOEE8063 SIFLIOEE800603 IT OEE/DTM (800) v6.3 IODS0061 SIFLIODS000601 IT On Line Debugging Support v6.1 IODS0063 SIFLIODS000603 IT On Line Debugging Support v6.3 IPDE0061 SIFLIPDE000601 IT PDE v6.1 IPDE0063 SIFLIPDE000603 IT PDE v6.3 IPRM0061 SIFLIPRM000601 IT Personnel Manager v6.1 IPRM0063 SIFLIPRM000603 IT Personnel Manager v6.3 IPDA0661 SIFLIPDA060601 IT Plant Data Archive (10000) v6.1 IPDA0663 SIFLIPDA060603 IT Plant Data Archive (10000) v6.3 IPPA0661 SIFLIPPA060601 IT Plant Performance Analyzer (30000) v6.1 IPPA0663 SIFLIPPA060603 IT Plant Performance Analyzer (30000) v6.3 IDFM0061 SIFLIDFM000601 IT Product Definition Manager v6.1 IDFM0063 SIFLIDFM000603 IT Product Definition Manager v6.3 IPMS0861 SIFLIPMS080601 IT Production Modeler (800) v6.1 IPMS0863 SIFLIPMS080603 IT Production Modeler (800) v6.3 IPMT0061 SIFLIPMT000601 IT Production Modeler Engineering Client (4) v6.1 IPMT0063 SIFLIPMT000603 IT Production Modeler Engineering Client (4) v6.3 IPOM0061 SIFLIPOM000601 IT Production Orders Manager v6.1 IPOM0063 SIFLIPOM000603 IT Production Orders Manager v6.3 ICLIP761 SIFLICLIP70601 IT Production Suite Client (25) v6.1 ICLIP763 SIFLICLIP70603 IT Production Suite Client (25) v6.3 IRDE0061 SIFLIRDE000601 IT Real Time Data Engine v6.1 IRDE0063 SIFLIRDE000603 IT Real Time Data Engine v6.3 IDEM0061 SIFLIDEM000601 IT Real Time Data Engine Manager v6.1 IDEM0063 SIFLIDEM000603 IT Real Time Data Engine Manager v6.3 IRDS0061 SIFLIRDS000601 IT Real Time Data Server v6.1 IRDS0063 SIFLIRDS000603 IT Real Time Data Server v6.3 IRMC0261 SIFLIRMC020601 IT Report Manager 25 concurrent client v6.1 IRMC0263 SIFLIRMC020603 IT Report Manager 25 concurrent client v6.3 IRMSR061 SIFLIRMSR00601 IT Report Manager Server v6.1 IRMSR063 SIFLIRMSR00603 IT Report Manager Server v6.3 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list IDOC0061 SIFLIDOC000601 IT SAP Connector iDOC v6.1 IDOC0063 SIFLIDOC000603 IT SAP Connector iDOC v6.3 ISFC0061 SIFLISFC000601 IT SAP Connector sRFC v6.1 ISFC0063 SIFLISFC000603 IT SAP Connector sRFC v6.3 ITFC0061 SIFLITFC000601 IT SAP Connector tRFC v6.1 ITFC0063 SIFLITFC000603 IT SAP Connector tRFC v6.3 ISQMS0061 SIFLISQMS00601 IT SAP QM Interface v6.1 ISQMS0063 SIFLISQMS00603 IT SAP QM Interface v6.3 ISCM0061 SIFLISCM000601 IT Scanner Manager (100) v6.1 ISCM0063 SIFLISCM000603 IT Scanner Manager (100) v6.3 ISVCH061 SIFLISVCH00601 IT Services for Historian Standard v6.1 ISVCH063 SIFLISVCH00603 IT Services for Historian Standard v6.3 ISVCP061 SIFLISVCP00601 IT Services for Production Suite v6.1 ISVCP063 SIFLISVCP00603 IT Services for Production Suite v6.3 IULSU661 SIFLIULSU60601 IT Unilab Advanced Server v6.1 IULSU663 SIFLIULSU60603 IT Unilab Advanced Server v6.3 IULCU761 SIFLIULCU70601 IT Unilab Client (25) v6.1 IULCU763 SIFLIULCU70603 IT Unilab Client (25) v6.3 IUPPU061 SIFLIUPPU00601 IT Unilab Pocket PC v6.1 IUPPU063 SIFLIUPPU00603 IT Unilab Pocket PC v6.3 IULSU361 SIFLIULSU30601 IT Unilab Standard Server v6.1 IULSU363 SIFLIULSU30603 IT Unilab Standard Server v6.3 IUUCU061 SIFLIUUCU00601 IT Unilab Uniconnect v6.1 IUUCU063 SIFLIUUCU00603 IT Unilab Uniconnect v6.3 Logon - Admin Tool v1.0 A1ADMT10 A1ADMT12 SIFLA1ADMT0102 Logon - Admin Tool 1.2 v1.2 A1ADMT13 SIFLA1ADMT0103 Logon - Admin Tool 1.3 v1.3 A1ADMT14 SIFLA1ADMT0104 Logon - Admin Tool 1.4 v1.4 Logon - Logon Service v1.0 A1LOGS10 A1LOGS12 SIFLA1LOGS0102 Logon - Logon Service 1.2 v1.2 A1LOGS13 SIFLA1LOGS0103 Logon - Logon Service 1.3 v1.3 A1LOGS14 SIFLA1LOGS0104 Logon - Logon Service 1.4 v1.4 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 211 212 EKB Installer A1S7M703 M7-ProC/C++ V3.x v3.x MAINES70 SIFLMAINES0700 Maintenance ES V7.0 v7.0 MAINES71 SIFLMAINES0701 Maintenance ES V7.1 v7.1 YMAINR71 SIFCYMAINR07001 Maintenance RT V7.0 (10) v7.0 YMAINR74 SIFCYMAINR07004 Maintenance RT V7.0 (100) v7.0 YMAINR77 SIFCYMAINR07007 Maintenance RT V7.0 (1000) v7.0 YMAINR75 SIFCYMAINR07005 Maintenance RT V7.0 (250) v7.0 YMAINR76 SIFCYMAINR07006 Maintenance RT V7.0 (500) v7.0 YMAINR70 SIFLYMAINR0700 v7.0 YMAINR71 SIFCYMAINR07011 Maintenance RT V7.1 (10) v7.1 YMAINR74 SIFCYMAINR07014 Maintenance RT V7.1 (100) v7.1 YMAINR77 SIFCYMAINR07017 Maintenance RT V7.1 (1000) v7.1 YMAINR70 SIFLYMAINR0701 Maintenance RT V7.1 (unlimited) v7.1 SMSRT2020 SIFLSMSRT20200 Maintenance Station 2009 Runtime v2.0 SMSRT1020 SIFLSMSRT10200 Maintenance Station 2009 Runtime v2.0 YSMSR020 SIFCYSMSR002000 Maintenance Station 2009 Runtime (100) v2.0 YSMSR020 SIFCYSMSR002003 Maintenance Station 2009 Runtime (1000) v2.0 YSMSR020 SIFCYSMSR002002 Maintenance Station 2009 Runtime (500) v2.0 YSMSR070 SIFLYSMSR00700 Maintenance Station Runtime v7.0 A1MCOU30 MicroComputing 1.0 (unlimited) v3.0 A1MCOL30 MicroComputing 3.0 (limited) v3.0 A1MOPC30 MicroOPC 3.0 v3.0 Modular PID Control 5.1 v5.1 Modular PID Control 5.x v5.x A1730151 SIFLA173010501 A1730105 Maintenance RT V7.0 (unlimited) MSSESB11 SIFLMSSESB0101 Modular Safety System ES 2008 Basic v1.1 MSSESS10 SIFLMSSESS0100 Modular Safety System ES 2008 Standard v1.0 MSSESS11 SIFLMSSESS0101 Modular Safety System ES 2008 Standard v1.1 MSSEST10 SIFLMSSEST0100 Modular Safety System ES 2008 Standard Trial v1.0 MSTESB40 SIFLMSTESB0400 Motor Starter ES 2007 Basic v4.0 MSTESP40 SIFLMSTESP0400 Motor Starter ES 2007 Premium v4.0 MSTESS40 SIFLMSTESS0400 Motor Starter ES 2007 Standard v4.0 A9SNEM90 SIFLA0SNEM0601 NET BCE/Windows 2000 v6.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list NOPCDX64 SIFLNOPCDX0604 NET DX OPC-Server v6.4 NOPCDX70 SIFLNOPCDX0700 NET DX OPC-Server v7.0 NOPCDX71 SIFLNOPCDX0701 NET DX OPC-Server v7.1 A9SNEX90 NET IE SOFTNET-S7 v9.0 A9SNEL90 NET IE SOFTNET-S7 Lean v9.0 A9SSSCN0 NET Ind. Ethernet SOFTNET-Security Client V1.0 vN.0 NOPCCB64 SIFLNOPCCB0604 NET Industrial Ethernet PN CBA OPC-Server v6.4 NOPCCB70 SIFLNOPCCB0700 NET Industrial Ethernet PN CBA OPC-Server v7.0 NOPCCB71 SIFLNOPCCB0701 NET Industrial Ethernet PN CBA OPC-Server v7.1 NHIES764 SIFLNHIES70604 NET Industrial Ethernet S7-1613 v6.4 NHIES770 SIFLNHIES70700 NET Industrial Ethernet S7-1613 v7.0 NHIES771 SIFLNHIES70701 NET Industrial Ethernet S7-1613 v7.1 NIERCN64 SIFLNIERCN0604 NET Industrial Ethernet S7-REDCONNECT v6.4 NIERCN70 SIFLNIERCN0700 NET Industrial Ethernet S7-REDCONNECT v7.0 NIERCN71 SIFLNIERCN0701 NET Industrial Ethernet S7-REDCONNECT v7.1 NSIEPN64 SIFLNSIEPN0604 NET Industrial Ethernet SOFTNET PN IO v6.4 NSIEPN70 SIFLNSIEPN0700 NET Industrial Ethernet SOFTNET PN IO v7.0 NSIEPN71 SIFLNSIEPN0701 NET Industrial Ethernet SOFTNET PN IO v7.1 NSIEPG64 SIFLNSIEPG0604 NET Industrial Ethernet SOFTNET-S7 Basis v6.4 NSIEPG70 SIFLNSIEPG0700 NET Industrial Ethernet SOFTNET-S7 Basis v7.0 NSIEPG71 SIFLNSIEPG0701 NET Industrial Ethernet SOFTNET-S7 Basis v7.1 NSIESL64 SIFLNSIESL0604 NET Industrial Ethernet SOFTNET-S7 Lean v6.4 NSIESL70 SIFLNSIESL0700 NET Industrial Ethernet SOFTNET-S7 Lean v7.0 NSIESL71 SIFLNSIESL0701 NET Industrial Ethernet SOFTNET-S7 Lean v7.1 NSIESE64 SIFLNSIESE0604 NET Industrial Ethernet SOFTNET-S7 Power Pack v6.4 NSIESE70 SIFLNSIESE0700 NET Industrial Ethernet SOFTNET-S7 Power Pack v7.0 NSIESE71 SIFLNSIESE0701 NET Industrial Ethernet SOFTNET-S7 Power Pack v7.1 A9SS1390 SIFLA0SS130601 NET Industrial Ethernet-S7 v6.1 A9SOPCN0 NET OPC-Server-DP vN.0 A9SOP7N0 NET OPC-Server-S7 vN.0 A9SNMPN0 NET OPC-Server-S7 Basis vN.0 A9SNMXN0 SIFLA0SNMX0601 NET OPC-Server-S7 Extended v6.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 213 214 EKB Installer A9SNMUN0 NET OPC-Server-S7 PowerPack V6.3 vN.0 A9SF5290 NET PG-5412 v9.0 NHPBDP64 SIFLNHPBDP0604 NET PROFIBUS DP-5613 v6.4 NHPBDP70 SIFLNHPBDP0700 NET PROFIBUS DP-5613 v7.0 NHPBDP71 SIFLNHPBDP0701 NET PROFIBUS DP-5613 v7.1 NHPBFM64 SIFLNHPBFM0604 NET PROFIBUS FMS-5613 v6.4 NHPBFM70 SIFLNHPBFM0700 NET PROFIBUS FMS-5613 v7.0 NHPBFM71 SIFLNHPBFM0701 NET PROFIBUS FMS-5613 v7.1 NHPBS764 SIFLNHPBS70604 NET PROFIBUS S7-5613 v6.4 NHPBS770 SIFLNHPBS70700 NET PROFIBUS S7-5613 v7.0 NHPBS771 SIFLNHPBS70701 NET PROFIBUS S7-5613 v7.1 NSPBDP64 SIFLNSPBDP0604 NET PROFIBUS SOFTNET-DP v6.4 NSPBDP70 SIFLNSPBDP0700 NET PROFIBUS SOFTNET-DP v7.0 NSPBDP71 SIFLNSPBDP0701 NET PROFIBUS SOFTNET-DP v7.1 NSPBDS64 SIFLNSPBDS0604 NET PROFIBUS SOFTNET-DP Slave v6.4 NSPBDS70 SIFLNSPBDS0700 NET PROFIBUS SOFTNET-DP Slave v7.0 NSPBDS71 SIFLNSPBDS0701 NET PROFIBUS SOFTNET-DP Slave v7.1 NSPBS764 SIFLNSPBS70604 NET PROFIBUS SOFTNET-S7 v6.4 NSPBS770 SIFLNSPBS70700 NET PROFIBUS SOFTNET-S7 v7.0 NSPBS771 SIFLNSPBS70701 NET PROFIBUS SOFTNET-S7 v7.1 NSIEL771 SIFLSNSIEL0701 NET PROFIBUS SOFTNET-S7 v7.1 A9SD5290 NET PROFIBUS-DP v9.0 A9SP5290 NET PROFIBUS-PG v9.0 A9SS5290 NET PROFIBUS-S7 v9.0 A9SHLA90 SIFLA0SHLA0601 NET S7-REDCONNECT v6.1 A0SHLA61 SIFLA0SHLA0601 NET S7-REDCONNECT v6.1 SNSIEL10 SIFLSNSIEL0100 NET SINEMA E Lean 2006 v1.0 SNSIES10 SIFLSNSIES0100 NET SINEMA E Standard 2006 v1.0 NOPCSB64 SIFLNOPCSB0604 NET SNMP-OPC-Server Basic v6.4 NOPCSB70 SIFLNOPCSB0700 NET SNMP-OPC-Server Basic v7.0 NOPCSB71 SIFLNOPCSB0701 NET SNMP-OPC-Server Basic v7.1 NOPCSE64 SIFLNOPCSE0604 NET SNMP-OPC-Server Power Pack v6.4 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list NOPCSE70 SIFLNOPCSE0700 NET SNMP-OPC-Server Power Pack v7.0 NOPCSE71 SIFLNOPCSE0701 NET SNMP-OPC-Server Power Pack v7.1 A9SDPS90 NET SOFTNET DP Slave v9.0 A9SNEP90 NET SOFTNET IE PG v9.0 A1S7NP02 NetPro V2.1 v2.x A1S7NP60 NetPro V6.0 v6.0 A1ODCE10 OPC Data Ctrl enterp. V1.0 v1.0 A1ODCP10 OPC Data Ctrl prof. V1.0 v1.0 A9WOP361 SIFLA9WOP30601 OpenPCS 7 Station / WinCC v6.1 A9WOP362 SIFLA9WOP30602 OpenPCS 7 Station / WinCC v6.2 A9WOP370 SIFLA9WOP30700 OpenPCS 7 Station / WinCC v7.0 P7WSV161 SIFLP7WSV10601 PCS 7 - Web Server (3) v6.1 P7WSV170 SIFLP7WSV10700 PCS 7 - Web Server (3) v7.0 P7WSV171 SIFLP7WSV10701 PCS 7 - Web Server (3) v7.1 P7WSV261 SIFLP7WSV20601 PCS 7 - Web Server 10 clients v6.1 P7WSV270 SIFLP7WSV20700 PCS 7 - Web Server 10 clients v7.0 P7WSV271 SIFLP7WSV20701 PCS 7 - Web Server 10 clients v7.1 P7WSV361 SIFLP7WSV30601 PCS 7 - Web Server 25 clients v6.1 P7WSV370 SIFLP7WSV30700 PCS 7 - Web Server 25 clients v7.0 P7WSV371 SIFLP7WSV30701 PCS 7 - Web Server 25 clients v7.1 P7WSV461 SIFLP7WSV40601 PCS 7 - Web Server 50 clients v6.1 P7WSV470 SIFLP7WSV40700 PCS 7 - Web Server 50 clients v7.0 P7WSV471 SIFLP7WSV40701 PCS 7 - Web Server 50 clients v7.1 PCS 7 R3i-PI v4.x A1PCS704 PCS7T271 SIFLPCS7T20701 PCS 7 WinCC v7.1 PCS7TT61 SIFLPCS7TT0601 PCS7 6.1 SP1 RC 150K PTg 512 ATg v6.1 PCS7TT70 SIFLPCS7TT0700 PCS7 7.0 RC 150K PTg 512 ATg v7.0 PCS7TT71 SIFLPCS7TT0701 PCS7 7.1 RC 150K PTg 512 ATg v7.1 ZASRPX70 SIFPZASRPX07001 PCS7 AS RT PO 100 v7.0 YASRPX70 SIFCYASRPX07001 PCS7 AS RT PO 100 v7.0 ZASRPX70 SIFPZASRPX07005 PCS7 AS RT PO 1000 v7.0 YASRPX70 SIFCYASRPX07005 PCS7 AS RT PO 1000 v7.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 215 216 EKB Installer ZASRPX70 SIFPZASRPX0700A PCS7 AS RT PO 10000 v7.0 YASRPX70 SIFCYASRPX0700A PCS7 AS RT PO 10000 v7.0 ZASRPX70 SIFLZASRPX0700 PCS7 AS RT PO 10000 v7.0 ZASRPX70 SIFPZASRPX07006 PCS7 AS RT PO 2000 v7.0 YASRPX70 SIFCYASRPX07006 PCS7 AS RT PO 2000 v7.0 ZASRPX70 SIFPZASRPX07002 PCS7 AS RT PO 250 v7.0 YASRPX70 SIFCYASRPX07002 PCS7 AS RT PO 250 v7.0 ZASRPX70 SIFPZASRPX07007 PCS7 AS RT PO 3000 v7.0 YASRPX70 SIFCYASRPX07007 PCS7 AS RT PO 3000 v7.0 ZASRPX70 SIFPZASRPX07003 PCS7 AS RT PO 500 v7.0 YASRPX70 SIFCYASRPX07003 PCS7 AS RT PO 500 v7.0 ZASRPX70 SIFPZASRPX07008 PCS7 AS RT PO 5000 v7.0 YASRPX70 SIFCYASRPX07008 PCS7 AS RT PO 5000 v7.0 ZASRPX70 SIFPZASRPX07004 PCS7 AS RT PO 750 v7.0 YASRPX70 SIFCYASRPX07004 PCS7 AS RT PO 750 v7.0 ZASRPX70 SIFPZASRPX07009 PCS7 AS RT PO 8500 v7.0 YASRPX70 SIFCYASRPX07009 PCS7 AS RT PO 8500 v7.0 PCS7 PID-Tuner V5.1 v5.1 A1PIDT51 A1PIDT61 SIFLA1PIDT0601 PCS7 PID-Tuner V6.1 v6.1 A1PIDT70 SIFLA1PIDT0700 PCS7 PID-Tuner V7.0 v7.0 A7T2CS50 PCS7/TM AS220 v5.0 A7TACS50 PCS7/TM AS220/23x v5.0 A7TMCS50 PCS7/TM AS23x v5.0 A7TMFP50 PCS7/TM Faceplates v5.0 A1SFC_04 PCS7-Engineering Options V4.x v4.x A3SPBE01 PDM Basis Evaluation v1.x PDM Basis Evaluation v6.0 v6.0 PDM Basis Integrated v1.x PDM Basis Integrated v6.0 v6.0 PDM Basis Software V5.2 v4.x PDM Basis Software V6.0 v6.0 PDM Basis Standalone v1.x A3SPBE60 SIFLA3SPBE0600 A3SPBI01 A3SPBI60 SIFLA3SPBI0600 A3SPBS04 A3SPBS60 A3SPBS01 SIFLA3SPBS0600 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list A3SPBS02 PDM Basis Standalone V5 v2.x A3SPBS03 PDM Basis Standalone V5.1 v3.x A3SPD101 PDM Diagnosis v1.x PDM Diagnosis v6.0 PDM ET200 HART v1.x PDM ET200 HART v6.0 PDM HART Modem v1.x PDM HART Modem v6.0 PDM HART Mux v1.x PDM HART Mux v6.0 PDM max. 128 Tags v1.x PDM max. 128 Tags v6.0 A3SPT801 PDM max. 16384 Tags v1.x A3SPT601 PDM max. 4096 Tags v1.x A3SPT301 PDM max. 512 Tags v1.x PDM max. 512 Tags v6.0 A3SPT701 PDM max. 8192 Tags v1.x A3SPDP01 PDM Profibus DP/PA v1.x PDM Profibus DP/PA v6.0 PDM Routing v1.x A3SPD160 SIFLA3SPD10600 A3SPHB01 A3SPHB60 SIFLA3SPHB0600 A3SPHM01 A3SPHM60 SIFLA3SPHM0600 A3SPHX01 A3SPHX60 SIFLA3SPHX0600 A3SPT101 A3SPT160 A3SPT360 A3SPDP60 SIFLA3SPT10600 SIFLA3SPT30600 SIFLA3SPDP0600 A3SPIE01 A3SPSP60 SIFLA3SPSP0600 PDM Routing v6.0 A3SPIE60 SIFLA3SPIE0600 PDM Routing v6.0 PDM RS 232 v1.x PDM RS 232 v6.0 PDM RS 485 v1.x PDM RS 485 v6.0 PDM Tag Count unlimited v1.x PDM Tag Count unlimited v6.0 PDM up to 1024 TAGs v1.x A3SPR201 A3SPR260 SIFLA3SPR20600 A3SPR401 A3SPR460 SIFLA3SPR40600 A3SPT901 A3SPT960 SIFLA3SPT90600 A3SPT401 A3SPT460 SIFLA3SPT40600 PDM up to 1024 TAGs v6.0 A3SPT860 SIFLA3SPT80600 PDM up to 16384 TAGs v6.0 PDM up to 2048 TAGs v1.x A3SPT501 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 217 218 EKB Installer A3SPT560 SIFLA3SPT50600 PDM up to 2048 TAGs v6.0 A3SPT660 SIFLA3SPT60600 PDM up to 4096 TAGs v6.0 A3SPT760 SIFLA3SPT70600 PDM up to 8192 TAGs v6.0 IPDA0361 SIFLIPDA030601 Plant Data Archive (1500) v6.1 IPDA0363 SIFLIPDA030603 Plant Data Archive (1500) v6.3 IPPA0061 SIFLIPPA000601 Plant Performance Analyzer (1500) v6.1 IPPA0063 SIFLIPPA000603 Plant Performance Analyzer (1500) v6.3 SRCG10020 SIFLSRCG100200 powercontrol > 10 Clients v2.0 SRCG10021 SIFLSRCG100201 powercontrol > 10 Clients v2.1 SRMAAD20 SIFLSRMAAD0200 powercontrol Advanced Version v2.0 SRMAAD21 SIFLSRMAAD0201 powercontrol Advanced Version v2.1 SRMALE20 SIFLSRMALE0200 powercontrol Lean Version v2.0 SRMALE21 SIFLSRMALE0201 powercontrol Lean Version v2.1 SRC01020 SIFLSRC0100200 powercontrol max. 10 Clients v2.0 SRC01021 SIFLSRC0100201 powercontrol max. 10 Clients v2.1 SRC00320 SIFLSRC0030200 powercontrol max. 3 Clients v2.0 SRC00321 SIFLSRC0030201 powercontrol max. 3 Clients v2.1 SRMAST20 SIFLSRMAST0200 powercontrol Standard Version v2.0 SRMAST21 SIFLSRMAST0201 powercontrol Standard Version v2.1 SRMATR20 SIFLSRMATR0200 powercontrol Trial Version v2.0 SRMATR21 SIFLSRMATR0201 powercontrol Trial Version v2.1 SRMAUN20 SIFLSRMAUN0200 powercontrol Unlimited Version v2.0 SRMAUN21 SIFLSRMAUN0201 powercontrol Unlimited Version v2.1 SPCOST20 SIFLSPCOST0200 powercost v2.0 SPCOST21 SIFLSPCOST0201 powercost v2.1 A9PROM50 ProAgent/MP v5.0 A9PROP50 ProAgent/PC v5.0 PRODAV60 SIFLPRODAV0600 PRODAVE/MPI V6.0 v6.0 IPMS0361 SIFLIPMS030601 Production Modeler (100) v6.1 IPMS0363 SIFLIPMS030603 Production Modeler (100) v6.3 IPMSL361 SIFLIPMSL30601 Production Modeler Lite (100) v6.1 IPMSL363 SIFLIPMSL30603 Production Modeler Lite (100) v6.3 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list ICLIP061 SIFLICLIP00601 Production Suite Client (1) v6.1 ICLIP063 SIFLICLIP00603 Production Suite Client (1) v6.3 ICLIP461 SIFLICLIP40601 Production Suite Client (10) v6.1 ICLIP463 SIFLICLIP40603 Production Suite Client (10) v6.3 A9PRO150 ProTool/Pro RT 128 Tags v5.0 A9PRO450 ProTool/Pro RT 2048 Tags v5.0 A9PRO250 ProTool/Pro RT 256 Tags v5.0 A9PRO350 ProTool/Pro RT 512 Tags v5.0 A9PRO550 ProTool/Pro RT 8000 Tags v5.0 A1PROV10 ProVision V1 v1.0 A1PROV20 ProVision V2 v2.0 A1PRSV20 ProVision V2 C v2.0 A1PROV21 ProVision V2.1 v2.1 A1PRSV21 ProVision V2.1 C v2.1 SRFMES10 SIFLSRFMES0100 RF-MANAGER 2007 v1.0 YRFMRT10 SIFCYRFMRT01000 RF-MANAGER 2007 Runtime (1) v1.0 YRFMRT10 SIFCYRFMRT01003 RF-MANAGER 2007 Runtime (20) v1.0 YRFMRT10 SIFCYRFMRT01001 RF-MANAGER 2007 Runtime (5) v1.0 YRFMRT10 SIFCYRFMRT01005 RF-MANAGER 2007 Runtime (50) v1.0 SRFMES11 SIFLSRFMES0101 RF-MANAGER 2008 v1.1 YRFMRT11 SIFCYRFMRT01010 RF-MANAGER 2008 Runtime (1) v1.1 YRFMRT11 SIFCYRFMRT01013 RF-MANAGER 2008 Runtime (20) v1.1 YRFMRT11 SIFCYRFMRT01011 RF-MANAGER 2008 Runtime (5) v1.1 YRFMRT11 SIFCYRFMRT01015 RF-MANAGER 2008 Runtime (50) v1.1 A7RCCX61 SIFLA7RCCX0601 Route Control Center v6.1 A7RCCX70 SIFLA7RCCX0700 Route Control Center v7.0 A7RCCX71 SIFLA7RCCX0701 Route Control Center v7.1 A7RCEN61 SIFLA7RCEN0601 Route Control Engineering v6.1 A7RCEN70 SIFLA7RCEN0700 Route Control Engineering v7.0 A7RCEN71 SIFLA7RCEN0701 Route Control Engineering v7.1 A7RCIS70 SIFLA7RCIS0700 Route Control Interface Server v7.0 A7RCS261 SIFLA7RCS20601 Route Control Server (100) v6.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 219 220 EKB Installer A7RCS270 SIFLA7RCS20700 Route Control Server (100) v7.0 A7RCS271 SIFLA7RCS20701 Route Control Server (100) v7.1 A7RCS161 SIFLA7RCS10601 Route Control Server 30 simultaneous v6.1 A7RCS170 SIFLA7RCS10700 Route Control Server 30 simultaneous v7.0 A7RCS171 SIFLA7RCS10701 Route Control Server 30 simultaneous v7.1 A7RCS361 SIFLA7RCS30601 Route Control Server 300 simultaneous v6.1 A7RCS370 SIFLA7RCS30700 Route Control Server 300 simultaneous v7.0 A7RCS371 SIFLA7RCS30701 Route Control Server 300 simultaneous v7.1 A9S5IE60 S5-PMS v6.0 A1CHAR50 S7 Charts V5.0 v5.0 A1CHAR60 S7 Charts V6.0 v6.0 A1DSAV50 S7 Distributed Safety v5.0 A1DSAV53 SIFLA1DSAV0503 S7 Distributed Safety v5.3 v5.3 A1DSAV54 SIFLA1DSAV0504 S7 Distributed Safety v5.4 v5.4 A1FSYS53 S7 F Systems V5.3 v5.3 A1FSYS05 S7 F Systems V5.x v5.x S7 F Systems V6.0 v6.0 A1731002 S7 Fuzzy Tool V2.x, V4.0 v2.x A1HSYS52 S7 H Systems V5.2 v5.2 A1HSYS53 S7 H Systems V5.3 v5.3 A1HSYS54 S7 H Systems V5.4 v5.4 A1HSYS05 S7 H Systems V5.x v5.x A1730103 S7 Modular PID Tool V3.x, V4.0 v3.x A1730202 S7 Standard PID Tool V2.x, V4.0 v2.x A1STDC05 S7 Standard PID Tool V5.x v5.x A9SSPIN0 S7/SR Ind. Ethernet SOFTNET-S7 V6.3 vN.0 A9SS13N0 S7/SR Ind.Ethernet Windows NT vN.0 A9SS52N0 S7-5412/Windows NT vN.0 A1S7GR03 S7-GRAPH V3.x v3.x A1S7GR04 S7-GRAPH V4.x v4.x A1S7GR51 S7-GRAPH V5.1 v5.1 A1S7GR52 S7-GRAPH V5.2 v5.2 A1FSYS60 SIFLA1FSYS0600 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list A1S7GR53 SIFLA1S7GR0503 S7-GRAPH V5.3 v5.3 A1S7GR54 SIFLA1S7GR0504 S7-GRAPH V5.4 v5.4 A1S7GR05 S7-GRAPH V5.x v5.x A1S7ZG40 S7-HIGRAPH V4.x v4.0 A1S7ZG52 S7-HIGRAPH V5.2 v5.2 A1S7ZG53 SIFLA1S7ZG0503 S7-HIGRAPH V5.3 v5.3 A1S7ZG54 SIFLA1S7ZG0504 S7-HIGRAPH V5.4 v5.4 A1S7ZG05 S7-HIGRAPH V5.x v5.x A1PDIA03 S7-PDIAG V3.x v3.x A1PDIA04 S7-PDIAG V4.x v4.x A1PDIA51 S7-PDIAG V5.1 v5.1 A1PDIA52 S7-PDIAG V5.2 v5.2 A1PDIA53 SIFLA1PDIA0503 S7-PDIAG V5.3 v5.3 A1PDIA54 SIFLA1PDIA0504 S7-PDIAG V5.4 v5.4 A1PDIA05 S7-PDIAG V5.x v5.x A1PLCS01 S7-PLCSIM V1.x v1.x A1PLCS03 S7-PLCSIM V3.x v3.x A1PLCS04 S7-PLCSIM V4.x v4.x A1PLCS51 S7-PLCSIM V5.2 v5.1 A1PLCS53 SIFLA1PLCS0503 S7-PLCSIM V5.3 v5.3 A1PLCS54 SIFLA1PLCS0504 S7-PLCSIM V5.4 v5.4 A1PLCS05 S7-PLCSIM V5.x v5.x A1SCL_03 S7-SCL V3.x v3.x A1SCL_04 S7-SCL V4.x v4.x A1SCL_05 S7-SCL V5.0 v5.x A1SCL_51 S7-SCL V5.1 v5.1 A1SCL_53 SIFLA1SCL_0503 S7-SCL V5.3 v5.3 A1SCL_54 SIFLA1SCL_0504 S7-SCL V5.4 v5.4 S7-Smartlabel V2 v2.0 S7-Smartlabel V3 v3.0 A1VERS05 S7-VersionStore V5.x v5.x A1SAFE52 Safety Matrix Editor V5.2 v5.2 A1SLAB20 A1SLAB30 SIFLA1SLAB0300 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 221 222 EKB Installer A1SAFE60 SIFLA1SAFE0600 Safety Matrix Editor V6.0 v6.0 A1SAFE01 SIFLA1SAFE0601 Safety Matrix Editor v6.1 v6.1 A1SAFE62 SIFLA1SAFE0602 Safety Matrix Editor V6.2 v6.2 A1SAFE70 SIFLA1SAFE0700 Safety Matrix Editor V7.0 v7.0 A1SAFM01 SIFLA1SAFM0601 Safety Matrix Engineering v6.1 v6.1 A1SAFM62 SIFLA1SAFM0602 Safety Matrix Engineering V6.2 v6.2 A1SAFM70 SIFLA1SAFM0700 Safety Matrix Engineering V7.0 v7.0 Safety Matrix Tool V5.2 v5.2 Safety Matrix Tool V6.0 v6.0 Safety Matrix Viewer V5.2 v5.2 A1SAFM52 A1SAFM60 SIFLA1SAFM0600 A1SAFV52 A1SAFV60 SIFLA1SAFV0600 Safety Matrix Viewer V6.0 v6.0 A1SAFV01 SIFLA1SAFV0601 Safety Matrix Viewer v6.1 v6.1 A1SAFV62 SIFLA1SAFV0602 Safety Matrix Viewer V6.2 v6.2 A1SAFV70 SIFLA1SAFV0700 Safety Matrix Viewer V7.0 v7.0 A9SPIE60 SD-PMS Industrial ETHERNET v6.0 A1SVLB02 SERVICE LAB V2.0/FUL v2.x A1SFCT61 SIFLA1SFCT0601 SFC for D7-SYS v6.1 A1SFCT70 SIFLA1SFCT0700 SFC for TDC v7.0 A1SFCT71 SIFLA1SFCT0701 SFC for TDC v7.1 A1SFC_03 SFC V3.x v3.x A1SFC_05 SFC V5.0 v5.x A1SFC_60 SIFLA1SFC_0600 SFC V6.0 v6.0 A1SFC_61 SIFLA1SFC_0601 SFC V6.1 v6.1 A1SFC_70 SIFLA1SFC_0700 SFC V7.0 v7.0 A1SFC_71 SIFLA1SFC_0701 SFC V7.1 v7.1 A1SFCV03 SFC VISUAL V3 v3.x A1SFCV04 SFC VISUAL V4 v4.x A1SFCV05 SFC-Visualization V5.0 v5.x A1SFCV60 SIFLA1SFCV0600 SFC-Visualization V6.0 v6.0 A1SFCV61 SIFLA1SFCV0601 SFC-Visualization V6.1 v6.1 A1SFCV70 SIFLA1SFCV0700 SFC-Visualization V7.0 v7.0 A1SFCV71 SIFLA1SFCV0701 SFC-Visualization V7.1 v7.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list SDM53001 SICAM Diamond Base V2.x v1.x SDM53002 SICAM Diamond for PAS V5.1 v2.x SDM53003 SICAM Diamond for SLD V1.x v3.x ESRC0001 SICAM PAS CC Config. V5.x v1.x ESNR0001 SICAM PAS CC Runtime V5.x v1.x ESP53001 SICAM plusTOOLS for eRTU v1.x ESVP0001 SICAM Valpro/Recpro V5.x v1.x SCOESB20 SIFLSCOESB0200 SIMOCODE ES 2007 Basic v2.0 SCOESP20 SIFLSCOESP0200 SIMOCODE ES 2007 Premium v2.0 SCOEST20 SIFLSCOEST0200 SIMOCODE ES 2007 Premium Trial v2.0 SCOESS20 SIFLSCOESS0200 SIMOCODE ES 2007 Standard v2.0 A2CAMT20 SIMOTION CamTool V2.0 v2.0 A2CAMT21 SIMOTION CamTool V2.1 v2.1 A2CAMT22 SIFLA2CAMT0202 SIMOTION CamTool v2.2 v2.2 A2CAMT30 SIFLA2CAMT0300 SIMOTION CamTool v3.0 v3.0 A2SCOU20 SIMOTION Scout V2.0 v2.0 A2SCOU30 SIMOTION Scout V3.0 v3.0 A2SCOU31 SIMOTION Scout V3.1 v3.1 A2SCOU32 SIFLA2SCOU0302 SIMOTION Scout V3.2 v3.2 A2SCOU40 SIFLA2SCOU0400 SIMOTION Scout V4.0 v4.0 A2SCOU41 SIFLA2SCOU0401 SIMOTION Scout V4.1 v4.1 A2SCOU42 SIFLA2SCOU0402 SIMOTION Scout V4.2 v4.2 A9SC7E93 SIN/NCMS7 - Ind. Ethernet V4.x WINDOWS NT v9.3 A9SC7P93 SIN/NCMS7 - PROFIBUS V4.x WINDOWS NT v9.3 A9SCC6N0 SINAUT SW ST7CC S vN.0 A9SSC6N0 SINAUT SW ST7SC S vN.0 SINUTR63 SIFLSINUTR0603 SINUMERIK SinuTrain v6.3 SINUTR73 SIFLSINUTR0703 SINUMERIK SinuTrain v7.3 SINUTT63 SIFLSINUTT0603 SINUMERIK SinuTrain Trial v6.3 A3SI0001 SIPROM v1.x A3SI0002 SIPROM v2.x Soft Starter ES 2007 Basic v2.0 SSTESB20 SIFLSSTESB0200 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 223 224 EKB Installer SSTESP20 SIFLSSTESP0200 Soft Starter ES 2007 Premium v2.0 SSTEST20 SIFLSSTEST0200 Soft Starter ES 2007 Premium Trial v2.0 SSTESS20 SIFLSSTESS0200 Soft Starter ES 2007 Standard v2.0 A1STDC52 SIFLA1STDC0502 Standard PID Control Tool V5.2 v5.2 STEP 5/ST BASIS V7.0 v7.0 STEP 7 Basic v10.5 v10.5 A1K70010 STEP 7 Lite V1.0 v1.0 A1K70020 STEP 7 Lite V2.0 v2.0 A1S5BP70 S7BASC105 SIFLS7BASC1005 A1K70030 SIFLA1K7000300 STEP 7 Lite V3.0 v3.0 WCFEA110 SIFLA1S7PL1000 STEP 7 Professional v10.0 S7PROF53 SIFLS7PROF0503 STEP 7 V5.3 Professional v5.3 S7PROF54 SIFLS7PROF0504 STEP 7 V5.4 Professional v5.4 S7PROF55 SIFLS7PROF0505 STEP 7 V5.5 Professional v5.5 A1710402 STEP 7-BASIS V2.x v2.x A1710403 STEP 7-BASIS V3.x v3.x A1710404 STEP 7-BASIS V4.x v4.x A1710405 STEP 7-BASIS V5.0 v5.x A1710451 STEP 7-BASIS V5.1 v5.1 A1710452 STEP 7-BASIS V5.2 v5.2 A1710453 SIFLA171040503 STEP 7-BASIS V5.3 v5.3 A1710454 SIFLA171040504 STEP 7-BASIS V5.4 v5.4 A1710455 SIFLA171040505 STEP 7-BASIS V5.5 v5.5 A1S7ZG25 STEP 7-HIGRAPH V2.5 v2.5 A1710304 STEP 7-MINI V4.x v4.x A1S5BP66 STEP5/ST-BASIS PC V6.6 v6.6 A1STOP11 SIFLA1STOP0101 StoragePlus v1.1 A1STOP12 SIFLA1STOP0102 StoragePlus v1.2 A1STOV11 SIFLA1STOV0101 StoragePlus-Viewer v1.1 A1STOV12 SIFLA1STOV0102 StoragePlus-Viewer v1.2 A9SDC140 SIFLA9SDC10400 System Diagnostics - CPUs 400 v4.0 A9SDC150 SIFLA9SDC10500 System Diagnostics - CPUs 400 v5.0 A9SDPB40 SIFLA9SDPB0400 System Diagnostics - PB Slave v4.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list A9SDPB50 SIFLA9SDPB0500 System Diagnostics - PB Slave v5.0 A9SDTD50 SIFLA9SDTD0500 System Diagnostics - PB Slave for TDC/FM v5.0 A9SDPN40 SIFLA9SDPN0400 System Diagnostics - PN Devices v4.0 A9SDPN50 SIFLA9SDPN0500 System Diagnostics - PN Devices v5.0 A1S7TS03 TeleService V3.x v3.x A1S7TS51 TeleService V5.1 v5.1 A1S7TS52 TeleService V5.2 v5.2 A1S7TS05 TeleService V5.x v5.x A1S7TS60 SIFLA1S7TS0600 TeleService V6.0 v6.0 A1S7TS61 SIFLA1S7TS0601 TeleService V6.1 v6.1 ThinClient/MP v1.0 A9TCMP10 A1THPO61 SIFLA1THPO0601 TH-PO V6.1 v6.1 A1THPO70 SIFLA1THPO0700 TH-PO V7.0 v7.0 A1THPO71 SIFLA1THPO0701 TH-PO V7.1 v7.1 A1VCCH60 SIFLA1VCCH0600 Version Cross Checker V6.0 v6.0 A1VCCH61 SIFLA1VCCH0601 Version Cross Checker V6.1 v6.1 A1VCCH70 SIFLA1VCCH0700 Version Cross Checker V7.0 v7.0 A1VCCH71 SIFLA1VCCH0701 Version Cross Checker V7.1 v7.1 A1VXMI70 SIFLA1VXMI0700 Version Cross Manager (Import) V7.0 v7.0 A1VXMI71 SIFLA1VXMI0701 Version Cross Manager (Import) V7.1 v7.1 A1VXME70 SIFLA1VXME0700 Version Cross Manager V7.0 v7.0 A1VXME71 SIFLA1VXME0701 Version Cross Manager V7.1 v7.1 A1VERT61 SIFLA1VERT0601 Version Trail v6.1 A1VERT70 SIFLA1VERT0700 Version Trail v7.0 A1VERT71 SIFLA1VERT0701 Version Trail v7.1 WAREHOUSE DECISION SUPPORT v3.x WinAC Basis 4.4 (2008) v4.4 A1WINA10 WinAC Basis V1.x / V2.x v1.0 A1WINA30 WinAC Basis V3.x v3.0 A1WINA40 WinAC Basis V4.0 v4.0 A1DSUP03 A1WINA44 SIFLA1WINA0404 A1WINA42 SIFLA1WINA0402 WinAC Basis V4.2 v4.2 A1WINA43 SIFLA1WINA0403 WinAC Basis V4.3 v4.3 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 225 226 EKB Installer WMP27740 SIFLWMP2770400 WinAC MP 2007 (MP 277) v4.0 WMP37740 SIFLWMP3770400 WinAC MP 2007 (MP 377) v4.0 WMP17741 SIFLWMP1770400 WinAC MP 2008 (MP 177) v4.1 WMP27741 SIFLWMP2770401 WinAC MP 2008 (MP 277) v4.1 WMP37741 SIFLWMP3770401 WinAC MP 2008 (MP 377) v4.1 WinAC MP V3.0 v3.0 WinAC PN 4.4 (2008) v4.4 A1WIPN11 WinAC PN V1.1 v1.1 A1WIPN40 WinAC PN V4.0 v4.0 A1WIPN41 WinAC PN V4.1 v4.1 A1WIMP30 A1WINA44 SIFLA1WIPN0404 A1WIPN42 SIFLA1WIPN0402 WinAC PN V4.2 v4.2 A1WIPN43 SIFLA1WIPN0403 WinAC PN V4.3 v4.3 WinAC RTX 4.1 v4.1 A1WRTX41 A1WRTX42 SIFLA1WRTX0402 WinAC RTX 4.2 (2005) v4.2 A1WRTX43 SIFLA1WRTX0403 WinAC RTX 4.3 (2005 SP3) v4.3 A1WRTX44 SIFLA1WRTX0404 WinAC RTX 4.4 (2008) v4.4 A1WRTX30 WinAC RTX V3.x v3.0 A1WRTX40 WinAC RTX V4.0 v4.0 A9ACC162 SIFLA9ACC10602 WINCC /ChangeControl RC v6.2 WCFEA110 SIFLWCFEA11000 WinCC Advanced v10.0 WINCC Advanced Process Ctrl v3.0 A1WPC230 A1WPC260 SIFLA1WPC20600 WINCC Advanced Process Ctrl v6.0 A1WPC262 SIFLA1WPC20602 WINCC Advanced Process Ctrl v6.2 A1WPC270 SIFLA1WPC20700 WINCC Advanced Process Ctrl v7.0 A9ACC170 SIFLA9ACC10700 WinCC Audit ChangeControl RC v7.0 WINCC Basic Process Ctrl v1.2 A1WPC112 A1WPC160 SIFLA1WPC10600 WINCC Basic Process Ctrl v6.0 A1WPC162 SIFLA1WPC10602 WINCC Basic Process Ctrl v6.2 A1WPC170 SIFLA1WPC10700 WINCC Basic Process Ctrl v7.0 WCBASC105 SIFLWCBASC1005 WinCC Basic v10.5 v10.5 A1WPC412 WINCC Chipcard v1.2 WINCC Chipcard v6.0 A1WPC460 SIFLA1WPC40600 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list A1WPC462 SIFLA1WPC40602 WINCC Chipcard v6.2 A1WPC470 SIFLA1WPC40700 WINCC Chipcard v7.0 A9WCP962 SIFLA9WCP90602 WinCC ES PO (unlimited) v6.2 A9WCP970 SIFLA9WCP90700 WinCC ES PO (unlimited) v7.0 A9XOP210 SIFLA9XOP20100 WinCC flexible /OPC-Server for MP v1.0 A9XOP310 SIFLA9XOP30100 WinCC flexible /OPC-Server for PC v1.0 A9XPA210 SIFLA9XPA20100 WinCC flexible /ProAgent for Panel v1.0 A9XPA310 SIFLA9XPA30100 WinCC flexible /ProAgent for PC v1.0 A9XSA210 SIFLA9XSA20100 WinCC flexible /Sm@rtAccess for Panel v1.0 A9XSA310 SIFLA9XSA30100 WinCC flexible /Sm@rtAccess for PC v1.0 A9XSS210 SIFLA9XSS20100 WinCC flexible /Sm@rtService for Panel v1.0 A9XSS310 SIFLA9XSS30100 WinCC flexible /Sm@rtService for PC v1.0 A9XEP110 WinCC flexible 2004 Advanced v1.0 A9XRP110 WinCC flexible 2004 Runtime, 128 v1.0 A9XRP210 WinCC flexible 2004 Runtime, 512 v1.0 A9XES110 WinCC flexible 2004 Standard v1.0 A9XAU211 SIFLA9XAU20101 WinCC flexible 2005 /Audit for Panels v1.1 A9XAU311 SIFLA9XAU30101 WinCC flexible 2005 /Audit for PC v1.1 A9XEP111 SIFLA9XEP10101 WinCC flexible 2005 Advanced v1.1 A9XEP211 SIFLA9XEP20101 WinCC flexible 2005 ASIA Advanced v1.1 A9XEC211 SIFLA9XEC20101 WinCC flexible 2005 ASIA Compact v1.1 A9XES211 SIFLA9XES20101 WinCC flexible 2005 ASIA Standard v1.1 A9XEC111 SIFLA9XEC10101 WinCC flexible 2005 Compact v1.1 A9XRP111 SIFLA9XRP10101 WinCC flexible 2005 Runtime (128) v1.1 A9XRP311 SIFLA9XRP30101 WinCC flexible 2005 Runtime (2048) v1.1 A9XRP211 SIFLA9XRP20101 WinCC flexible 2005 Runtime (512) v1.1 A9XES111 SIFLA9XES10101 WinCC flexible 2005 Standard v1.1 A9XEP112 SIFLA9XEP10102 WinCC flexible 2007 Advanced v1.2 A9XEP212 SIFLA9XEP20102 WinCC flexible 2007 ASIA Advanced v1.2 A9XEC212 SIFLA9XEC20102 WinCC flexible 2007 ASIA Compact v1.2 A9XES212 SIFLA9XES20102 WinCC flexible 2007 ASIA Standard v1.2 A9XEC112 SIFLA9XEC10101 WinCC flexible 2007 Compact v1.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 227 228 EKB Installer A9XRP112 SIFLA9XRP10102 WinCC flexible 2007 Runtime (128) v1.2 A9XRP312 SIFLA9XRP30102 WinCC flexible 2007 Runtime (2048) v1.2 A9XRP212 SIFLA9XRP20102 WinCC flexible 2007 Runtime (512) v1.2 A9XES112 SIFLA9XES10102 WinCC flexible 2007 Standard v1.2 A9XEP113 SIFLA9XEP10103 WinCC flexible 2008 Advanced v1.3 A9XEP213 SIFLA9XEP20103 WinCC flexible 2008 ASIA Advanced v1.3 A9XEC213 SIFLA9XEC20103 WinCC flexible 2008 ASIA Compact v1.3 A9XES213 SIFLA9XES20103 WinCC flexible 2008 ASIA Standard v1.3 A9XEC113 SIFLA9XEC10103 WinCC flexible 2008 Compact v1.3 A9XRP113 SIFLA9XRP10103 WinCC flexible 2008 Runtime (128) v1.3 A9XRP313 SIFLA9XRP30103 WinCC flexible 2008 Runtime (2048) v1.3 A9XRP413 SIFLA9XRP40103 WinCC flexible 2008 Runtime (4096) v1.3 A9XRP213 SIFLA9XRP20103 WinCC flexible 2008 Runtime (512) v1.3 A9XES113 SIFLA9XES10103 WinCC flexible 2008 Standard v1.3 A9XEC110 WinCC flexible Compact V1.0 v1.0 A9XRP310 WinCC flexible RT prof. 2048 Tags V1 v1.0 A9XAR310 SIFLA9XAR30100 WinCC flexible/Archives V1.0 for PC-RT v1.0 A9XCC113 SIFLA9XCC10103 WinCC flexible/ChangeControl 2008 v1.3 A9XCC110 SIFLA9XCC10100 WinCC flexible/ChangeControl V1.0 Advanced v1.0 A9XCC112 SIFLA9XCC10102 WinCC flexible/ChangeControl V1.2 v1.2 A9XCI310 SIFLA9XCI30100 WinCC flexible/Recipes V1.0 for PC-RT v1.0 WINCC Interf. 505 TCP/IP v4.0 A9WC2540 A9WC2560 SIFLA9WC250600 WINCC Interf. 505 TCP/IP v6.0 A9WC2561 SIFLA9WC250601 WINCC Interf. 505 TCP/IP v6.1 A9WC2562 SIFLA9WC250602 WINCC Interf. 505 TCP/IP v6.2 A9WC2570 SIFLA9WC250700 WINCC Interf. 505 TCP/IP v7.0 WINCC Interf. 505/Eth v1.2 A9WC1912 A9WC1960 SIFLA9WC190600 WINCC Interf. 505/Eth v6.0 A9WC1961 SIFLA9WC190601 WINCC Interf. 505/Eth v6.1 A9WC1962 SIFLA9WC190602 WINCC Interf. 505/Eth v6.2 A9WC1970 SIFLA9WC190700 WINCC Interf. 505/Eth v7.0 WINCC Interf. AB/DF1 v1.2 A9WCL512 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list A9WCL560 SIFLA9WCL50600 WINCC Interf. AB/DF1 v6.0 A9WCL562 SIFLA9WCL50602 WINCC Interf. AB/DF1 v6.2 A9WCL570 SIFLA9WCL50700 WINCC Interf. AB/DF1 v7.0 WINCC Interf. AB/DH v1.2 A9WC1412 A9WC1460 SIFLA9WC140600 WINCC Interf. AB/DH v6.0 A9WC1462 SIFLA9WC140602 WINCC Interf. AB/DH v6.2 A9WC1470 SIFLA9WC140700 WINCC Interf. AB/DH v7.0 WINCC Interf. Applicom v1.2 A9WC1112 A9WC1160 SIFLA9WC110600 WINCC Interf. Applicom v6.0 A9WC1162 SIFLA9WC110602 WINCC Interf. Applicom v6.2 A9WC1170 SIFLA9WC110700 WINCC Interf. Applicom v7.0 WINCC Interf. GE/Eth v1.2 A9WC1312 A9WC1360 SIFLA9WC130600 WINCC Interf. GE/Eth v6.0 A9WC1362 SIFLA9WC130602 WINCC Interf. GE/Eth v6.2 A9WC1370 SIFLA9WC130700 WINCC Interf. GE/Eth v7.0 WINCC Interf. GE/SNP v1.2 A9WC1212 A9WC1260 SIFLA9WC120600 WINCC Interf. GE/SNP v6.0 A9WC1262 SIFLA9WC120602 WINCC Interf. GE/SNP v6.2 A9WC1270 SIFLA9WC120700 WINCC Interf. GE/SNP v7.0 WINCC Interf. Mod ser. v1.2 A9WCL812 A9WCL860 SIFLA9WCL80600 WINCC Interf. Mod ser. v6.0 A9WCL862 SIFLA9WCL80602 WINCC Interf. Mod ser. v6.2 A9WCL870 SIFLA9WCL80700 WINCC Interf. Mod ser. v7.0 WINCC Interf. Pro. FMS v1.2 A9WCL612 A9WCL660 SIFLA9WCL60600 WINCC Interf. Pro. FMS v6.0 A9WCL661 SIFLA9WCL60601 WINCC Interf. Pro. FMS v6.1 A9WCL662 SIFLA9WCL60602 WINCC Interf. Pro. FMS v6.2 A9WCL670 SIFLA9WCL60700 WINCC Interf. Pro. FMS v7.0 WINCC Interf. S5-PMCH1 v1.2 A9WC1012 A9WC1060 SIFLA9WC100600 WINCC Interf. S5-PMCH1 v6.0 A9WC1062 SIFLA9WC100602 WINCC Interf. S5-PMCH1 v6.2 A9WC1070 SIFLA9WC100700 WINCC Interf. S5-PMCH1 v7.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 229 230 EKB Installer A9WCL912 WINCC Interf. S5-PMCL2 v1.2 A9WCL960 SIFLA9WCL90600 WINCC Interf. S5-PMCL2 v6.0 A9WCL962 SIFLA9WCL90602 WINCC Interf. S5-PMCL2 v6.2 A9WCL970 SIFLA9WCL90700 WINCC Interf. S5-PMCL2 v7.0 WINCC Interf. S5SR/Eth v1.2 A9WC1812 A9WC1860 SIFLA9WC180600 WINCC Interf. S5SR/Eth v6.0 A9WC1861 SIFLA9WC180601 WINCC Interf. S5SR/Eth v6.1 A9WC1862 SIFLA9WC180602 WINCC Interf. S5SR/Eth v6.2 A9WC1870 SIFLA9WC180700 WINCC Interf. S5SR/Eth v7.0 WINCC Interf. S5TF/Eth v1.2 A9WC1712 A9WC1760 SIFLA9WC170600 WINCC Interf. S5TF/Eth v6.0 A9WC1761 SIFLA9WC170601 WINCC Interf. S5TF/Eth v6.1 A9WC1762 SIFLA9WC170602 WINCC Interf. S5TF/Eth v6.2 A9WC1770 SIFLA9WC170700 WINCC Interf. S5TF/Eth v7.0 WINCC Interf. S7-PMC v3.0 A9WCL730 A9WCL760 SIFLA9WCL70600 WINCC Interf. S7-PMC v6.0 A9WCL762 SIFLA9WCL70602 WINCC Interf. S7-PMC v6.2 A9WCL770 SIFLA9WCL70700 WINCC Interf. S7-PMC v7.0 A3WCL112 WINCC Interf. SIPART v1.2 A3WCL160 WINCC Interf. SIPART v6.0 A9WOIC40 WINCC Internet Conn. v4.0 A9WOIC60 SIFLA9WOIC0600 WINCC Internet Conn. v6.0 A9WOIC62 SIFLA9WOIC0602 WINCC Internet Conn. v6.2 A9WOIC70 SIFLA9WOIC0700 WINCC Internet Conn. v7.0 WINCC Mitsubishi FX serial v3.0 A9WC2030 A9WC2060 SIFLA9WC200600 WINCC Mitsubishi FX serial v6.0 A9WC2062 SIFLA9WC200602 WINCC Mitsubishi FX serial v6.2 A9WC2070 SIFLA9WC200700 WINCC Mitsubishi FX serial v7.0 WINCC Mitsubishi MELSEC-A serial v3.0 A9WC2130 A9WC2160 SIFLA9WC210600 WINCC Mitsubishi MELSEC-A serial v6.0 A9WC2162 SIFLA9WC210602 WINCC Mitsubishi MELSEC-A serial v6.2 A9WC2170 SIFLA9WC210700 WINCC Mitsubishi MELSEC-A serial v7.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list A9WC2340 WINCC OMRON C-Series Host Link v4.0 A9WC2360 SIFLA9WC230600 WINCC OMRON C-Series Host Link v6.0 A9WC2362 SIFLA9WC230602 WINCC OMRON C-Series Host Link v6.2 A9WC2370 SIFLA9WC230700 WINCC OMRON C-Series Host Link v7.0 A9WOP261 SIFLA9WOP20601 WinCC Option Connectivity Station v6.1 A9WOP462 SIFLA9WOP40601 WinCC Option Connectivity Station v6.1 A9WOP262 SIFLA9WOP20602 WinCC Option Connectivity Station v6.2 A9WOP462 SIFLA9WOP40602 WinCC Option Connectivity Station v6.2 A9WOP270 SIFLA9WOP20700 WinCC Option Connectivity Station v7.0 A9WOP470 SIFLA9WOP40700 WinCC Option Connectivity Station v7.0 WINCPR30 SIFLWINCPR0300 WinCC powerrate v3.0 v3.0 WINCC ProAgent 16 Clients v5.1 A9WSP351 A9WSP360 SIFLA9WSP30601 WINCC ProAgent 16 Clients v6.1 A9WSP362 SIFLA9WSP30602 WINCC ProAgent 16 Clients v6.2 A9WSP370 SIFLA9WSP30700 WINCC ProAgent 16 Clients v7.0 A9WSP370 SIFLA9WSP30700 WINCC ProAgent 16 Clients v7.0 WINCC ProAgent 4 Clients v5.1 A9WSP151 A9WSP160 SIFLA9WSP10601 WINCC ProAgent 4 Clients v6.1 A9WSP162 SIFLA9WSP10602 WINCC ProAgent 4 Clients v6.2 A9WSP170 SIFLA9WSP10700 WINCC ProAgent 4 Clients v7.0 A9WSP170 SIFLA9WSP10700 WINCC ProAgent 4 Clients v7.0 WINCC ProAgent 8 Clients v5.1 A9WSP251 A9WSP260 SIFLA9WSP20601 WINCC ProAgent 8 Clients v6.1 A9WSP262 SIFLA9WSP20602 WINCC ProAgent 8 Clients v6.2 A9WSP270 SIFLA9WSP20700 WINCC ProAgent 8 Clients v7.0 A9WSP270 SIFLA9WSP20700 WINCC ProAgent 8 Clients v7.0 WINCC ProAgent WinCC v4.0 A9WSPA40 A9WSPA60 SIFLA9WSPA0600 WINCC ProAgent WinCC v6.0 A9WSPA62 SIFLA9WSPA0602 WINCC ProAgent WinCC v6.2 A9WSPA70 SIFLA9WSPA0700 WINCC ProAgent WinCC v7.0 A9WSPA70 SIFLA9WSPA0700 WINCC ProAgent WinCC v7.0 WCFEE110 SIFLWCFEE11000 WinCC Professional v10.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 231 232 EKB Installer A9WC2440 WINCC Profibus-DP v4.0 A9WC2460 SIFLA9WC240600 WINCC Profibus-DP v6.0 A9WC2462 SIFLA9WC240602 WINCC Profibus-DP v6.2 A9WC2470 SIFLA9WC240700 WINCC Profibus-DP v7.0 A9WRC330 WINCC RC 1024 Tags v3.0 A9WRC130 WINCC RC 128 Tags v3.0 A9WRC830 WINCC RC 150K PowerTags v3.0 A9WRC230 WINCC RC 256 Tags v3.0 A9WRC730 WINCC RC 256K PowerTags v3.0 A9WRC430 WINCC RC 64K Tags V3.0 v3.0 A9WRC530 WINCC RC 8000 PowerTags v3.0 A9WCP362 SIFLA9WCP30602 WinCC RC PO (2000) v6.2 A9WCP370 SIFLA9WCP30700 WinCC RC PO (2000) v7.0 WINCC Redundancy v4.0 A9WSRD40 A9WSRD60 SIFLA9WSRD0600 WINCC Redundancy v6.0 A9WSRD62 SIFLA9WSRD0602 WINCC Redundancy v6.2 A9WSRD70 SIFLA9WSRD0700 WINCC Redundancy v7.0 WINCC Reserve #1 v1.2 A9WC1512 A9WC1560 SIFLA9WC150600 WINCC Reserve #1 v6.0 A9WC1562 SIFLA9WC150602 WINCC Reserve #1 v6.2 A9WC1570 SIFLA9WC150700 WINCC Reserve #1 v7.0 WINCC Reserve #2 v1.2 A9WC1612 A9WC1660 SIFLA9WC160600 WINCC Reserve #2 v6.0 A9WC1662 SIFLA9WC160602 WINCC Reserve #2 v6.2 A9WC1670 SIFLA9WC160700 WINCC Reserve #2 v7.0 A9WRT330 WINCC RT 1024 Tags v3.0 A9WRT130 WINCC RT 128 Tags v3.0 A9WRT830 WINCC RT 150K PowerTags v3.0 A9WRT230 WINCC RT 256 Tags v3.0 A9WRT730 WINCC RT 256K PowerTags v3.0 A9WRT430 WINCC RT 64K PowerTags v3.0 WinCC RT PO (1000) v6.2 A9WRP262 SIFLA9WRP20602 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list A9WRP270 SIFLA9WRP20700 WinCC RT PO (1000) v7.0 A9WRP762 SIFLA9WRP70602 WinCC RT PO (10000) v6.2 A9WRP770 SIFLA9WRP70700 WinCC RT PO (10000) v7.0 A9WRP362 SIFLA9WRP30602 WinCC RT PO (2000) v6.2 A9WRP370 SIFLA9WRP30700 WinCC RT PO (2000) v7.0 A9WRP862 SIFLA9WRP80602 WinCC RT PO (20000) v6.2 A9WRP870 SIFLA9WRP80700 WinCC RT PO (20000) v7.0 A9WRP162 SIFLA9WRP10602 WinCC RT PO (250) v6.2 A9WRP170 SIFLA9WRP10700 WinCC RT PO (250) v7.0 A9WRP462 SIFLA9WRP40602 WinCC RT PO (3000) v6.2 A9WRP470 SIFLA9WRP40700 WinCC RT PO (3000) v7.0 A9WRP562 SIFLA9WRP50602 WinCC RT PO (5000) v6.2 A9WRP570 SIFLA9WRP50700 WinCC RT PO (5000) v7.0 A9WRP662 SIFLA9WRP60602 WinCC RT PO (8500) v6.2 A9WRP670 SIFLA9WRP60700 WinCC RT PO (8500) v7.0 A9WRP962 SIFLA9WRP90602 WinCC RT PO (unlimited) v6.2 A9WRP970 SIFLA9WRP90700 WinCC RT PO (unlimited) v7.0 A9WRP062 SIFLA9WRP00602 WinCC RT PO Client v6.2 A9WRP070 SIFLA9WRP00700 WinCC RT PO Client v7.0 WINCC Server v3.0 A9WSEC30 A9WSEC60 SIFLA9WSEC0600 WINCC Server v6.0 A9WSEC61 SIFLA9WSEC0601 WINCC Server v6.1 A9WSEC62 SIFLA9WSEC0602 WINCC Server v6.2 A9WSEC70 SIFLA9WSEC0700 WINCC Server v7.0 WINCC SIMADYN D-PMC Eth v3.0 A9WC2230 A9WC2260 SIFLA9WC220600 WINCC SIMADYN D-PMC Eth v6.0 A9WC2262 SIFLA9WC220602 WINCC SIMADYN D-PMC Eth v6.2 A9WC2270 SIFLA9WC220700 WINCC SIMADYN D-PMC Eth v7.0 WINCC Storage v1.2 A1WPC312 A1WPC360 SIFLA1WPC30600 WINCC Storage v6.0 A1WPC362 SIFLA1WPC30602 WINCC Storage v6.2 A1WPC370 SIFLA1WPC30700 WINCC Storage v7.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 233 234 EKB Installer A9WARC12 WINCC User Archives v1.2 A9WARC60 SIFLA9WARC0600 WINCC User Archives v6.0 A9WARC62 SIFLA9WARC0602 WINCC User Archives v6.2 A9WARC70 SIFLA9WARC0700 WINCC User Archives v7.0 WINCC Video v1.2 A1WPC512 A1WPC560 SIFLA1WPC50600 WINCC Video v6.0 A1WPC562 SIFLA1WPC50602 WINCC Video v6.2 A1WPC570 SIFLA1WPC50700 WINCC Video v7.0 WINCC WebDiag Client v1.0 A9WDC110 A9WDC160 SIFLA9WDC10600 WINCC WebDiag Client v6.0 A9WDC161 SIFLA9WDC10601 WINCC WebDiag Client v6.1 A9WDC162 SIFLA9WDC10602 WINCC WebDiag Client v6.2 A9WDC170 SIFLA9WDC10700 WINCC WebDiag Client v7.0 WINCC WebDiag Server v1.0 A9WDS110 A9WDS160 SIFLA9WDS10600 WINCC WebDiag Server v6.0 A9WDS161 SIFLA9WDS10601 WINCC WebDiag Server v6.1 A9WDS162 SIFLA9WDS10602 WINCC WebDiag Server v6.2 A9WDS170 SIFLA9WDS10700 WINCC WebDiag Server v7.0 A9WSN210 WINCC WebNavigator 10 Clients v1.0 A9WSN310 WINCC WebNavigator 25 Clients v1.0 A9WSN110 WINCC WebNavigator 3 Clients v1.0 A9WSN410 WINCC WebNavigator 50 Clients v1.0 Y9WTG562 SIFCY9WTGX06025 WINCC-V6 Arch 10000 ATg v6.2 Y9WTG762 SIFCY9WTGX06027 WINCC-V6 Arch 120000 ATg v6.2 A9WTG160 SIFLA9WTG10600 WINCC-V6 Arch 1500 ATg v6.0 Y9WTG162 SIFCY9WTGX06021 WINCC-V6 Arch 1500 ATg v6.2 A9WTG360 SIFLA9WTG30600 WINCC-V6 Arch 30000 ATg v6.0 Y9WTG362 SIFCY9WTGX06023 WINCC-V6 Arch 30000 ATg v6.2 A9WTG460 SIFLA9WTG40600 WINCC-V6 Arch 4G ATg UNLIM v6.0 Y9WTG462 SIFCY9WTGX06024 WINCC-V6 Arch 4G ATg UNLIM v6.2 A9WTG260 SIFLA9WTG20600 WINCC-V6 Arch 5000 ATg v6.0 Y9WTG262 SIFCY9WTGX06022 WINCC-V6 Arch 5000 ATg v6.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list Y9WTG662 SIFCY9WTGX06026 WINCC-V6 Arch 80000 ATg v6.2 A9ARC161 SIFLA9ARC10601 WINCC-V6 Audit RC v6.1 A9ARC162 SIFLA9ARC10602 WINCC-V6 Audit RC v6.2 A9ART161 SIFLA9ART10601 WINCC-V6 Audit RT v6.1 A9ART162 SIFLA9ART10602 WINCC-V6 Audit RT v6.2 A9WOP160 SIFLA9WOP10600 WINCC-V6 Connectivity Pack v6.0 A9WOP161 SIFLA9WOP10601 WINCC-V6 Connectivity Pack v6.1 A9WOP162 SIFLA9WOP10602 WINCC-V6 Connectivity Pack v6.2 A9IDB460 SIFLA9IDB40600 WINCC-V6 Ind.DataBridge 10000 Tg v6.0 A9IDB461 SIFLA9IDB40601 WINCC-V6 Ind.DataBridge 10000 Tg v6.1 A9IDB462 SIFLA9IDB40602 WINCC-V6 Ind.DataBridge 10000 Tg v6.2 A9IDB260 SIFLA9IDB20600 WINCC-V6 Ind.DataBridge 1024 Tg v6.0 A9IDB161 SIFLA9IDB10601 WINCC-V6 Ind.DataBridge 128 Tg v6.1 A9IDB162 SIFLA9IDB10602 WINCC-V6 Ind.DataBridge 128 Tg v6.2 A9IDB360 SIFLA9IDB30600 WINCC-V6 Ind.DataBridge 2048 Tg v6.0 A9IDB361 SIFLA9IDB30601 WINCC-V6 Ind.DataBridge 2048 Tg v6.1 A9IDB362 SIFLA9IDB30602 WINCC-V6 Ind.DataBridge 2048 Tg v6.2 A9IDB261 SIFLA9IDB20601 WINCC-V6 Ind.DataBridge 512 Tg v6.1 A9IDB262 SIFLA9IDB20602 WINCC-V6 Ind.DataBridge 512 Tg v6.2 A9IDB160 SIFLA9IDB10600 WINCC-V6 Ind.DataBridge 512 Tg v6.0 A9WLB160 SIFLA9WLB10600 WINCC-V6 Load Balancing v6.0 A9WLB161 SIFLA9WLB10601 WINCC-V6 Load Balancing v6.1 A9WLB162 SIFLA9WLB10602 WINCC-V6 Load Balancing v6.2 A9LB1060 SIFLA9LB100600 WINCC-V6 Load Balancing Step Up v6.0 A9LB1061 SIFLA9LB100601 WINCC-V6 Load Balancing Step Up v6.1 A9LB1062 SIFLA9LB100602 WINCC-V6 Load Balancing Step Up v6.2 A9WNC160 SIFLA9WNC10600 WINCC-V6 NetCC Client v6.0 A9WRC660 SIFLA9WRC60600 WINCC-V6 RC 100K PTg 512 ATg v6.0 A9WRC661 SIFLA9WRC60601 WINCC-V6 RC 100K PTg 512 ATg v6.1 A9WRC662 SIFLA9WRC60602 WINCC-V6 RC 100K PTg 512 ATg v6.2 A9WRC360 SIFLA9WRC30600 WINCC-V6 RC 1024 PTg 512 ATg v6.0 A9WRC361 SIFLA9WRC30601 WINCC-V6 RC 1024 PTg 512 ATg v6.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 235 236 EKB Installer A9WRC362 SIFLA9WRC30602 WINCC-V6 RC 1024 PTg 512 ATg v6.2 A9WRC160 SIFLA9WRC10600 WINCC-V6 RC 128 PTg 512 ATg v6.0 A9WRC161 SIFLA9WRC10601 WINCC-V6 RC 128 PTg 512 ATg v6.1 A9WRC162 SIFLA9WRC10602 WINCC-V6 RC 128 PTg 512 ATg v6.2 A9WRC860 SIFLA9WRC80600 WINCC-V6 RC 150K PTg 512 ATg v6.0 A9WRC861 SIFLA9WRC80601 WINCC-V6 RC 150K PTg 512 ATg v6.1 A9WRC862 SIFLA9WRC80602 WINCC-V6 RC 150K PTg 512 ATg v6.2 A9WRC260 SIFLA9WRC20600 WINCC-V6 RC 256 PTg 512 ATg v6.0 A9WRC261 SIFLA9WRC20601 WINCC-V6 RC 256 PTg 512 ATg v6.1 A9WRC262 SIFLA9WRC20602 WINCC-V6 RC 256 PTg 512 ATg v6.2 A9WRC760 SIFLA9WRC70600 WINCC-V6 RC 256K PTg 512 ATg v6.0 A9WRC761 SIFLA9WRC70601 WINCC-V6 RC 256K PTg 512 ATg v6.1 A9WRC762 SIFLA9WRC70602 WINCC-V6 RC 256K PTg 512 ATg v6.2 A9WRC460 SIFLA9WRC40600 WINCC-V6 RC 64K PTg 512 ATg v6.0 A9WRC461 SIFLA9WRC40601 WINCC-V6 RC 64K PTg 512 ATg v6.1 A9WRC462 SIFLA9WRC40602 WINCC-V6 RC 64K PTg 512 ATg v6.2 A9WRC560 SIFLA9WRC50600 WINCC-V6 RC 8000 PTg 512 ATg v6.0 A9WRC561 SIFLA9WRC50601 WINCC-V6 RC 8000 PTg 512 ATg v6.1 A9WRC562 SIFLA9WRC50602 WINCC-V6 RC 8000 PTg 512 ATg v6.2 A9WCP262 SIFLA9WCP20602 WINCC-V6 RC PO 1000 PTg 512 ATg v6.2 A9WCP762 SIFLA9WCP70602 WINCC-V6 RC PO 10000 PTg 512 ATg v6.2 A9WCP462 SIFLA9WCP40601 WINCC-V6 RC PO 2000 PTg 512 ATg v6.2 A9WCP862 SIFLA9WCP80602 WINCC-V6 RC PO 20000 PTg 512 ATg v6.2 A9WCP162 SIFLA9WCP10602 WINCC-V6 RC PO 250 PTg 512 ATg v6.2 A9WCP562 SIFLA9WCP50602 WINCC-V6 RC PO 5000 PTg 512 ATg v6.2 A9WCP662 SIFLA9WCP60602 WINCC-V6 RC PO 8500 PTg 512 ATg v6.2 A9WRT660 SIFLA9WRT60600 WINCC-V6 RT 100K PTg 512 ATg v6.0 A9WRT661 SIFLA9WRT60601 WINCC-V6 RT 100K PTg 512 ATg v6.1 A9WRT662 SIFLA9WRT60602 WINCC-V6 RT 100K PTg 512 ATg v6.2 A9WRT360 SIFLA9WRT30600 WINCC-V6 RT 1024 PTg 512 ATg v6.0 A9WRT361 SIFLA9WRT30601 WINCC-V6 RT 1024 PTg 512 ATg v6.1 A9WRT362 SIFLA9WRT30602 WINCC-V6 RT 1024 PTg 512 ATg v6.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list A9WRT160 SIFLA9WRT10600 WINCC-V6 RT 128 PTg 512 ATg v6.0 A9WRT161 SIFLA9WRT10601 WINCC-V6 RT 128 PTg 512 ATg v6.1 A9WRT162 SIFLA9WRT10602 WINCC-V6 RT 128 PTg 512 ATg v6.2 A9WRT860 SIFLA9WRT80600 WINCC-V6 RT 150K PTg 512 ATg v6.0 A9WRT861 SIFLA9WRT80601 WINCC-V6 RT 150K PTg 512 ATg v6.1 A9WRT862 SIFLA9WRT80602 WINCC-V6 RT 150K PTg 512 ATg v6.2 A9WRT260 SIFLA9WRT20600 WINCC-V6 RT 256 PTg 512 ATg v6.0 A9WRT261 SIFLA9WRT20601 WINCC-V6 RT 256 PTg 512 ATg v6.1 A9WRT262 SIFLA9WRT20602 WINCC-V6 RT 256 PTg 512 ATg v6.2 A9WRT760 SIFLA9WRT70600 WINCC-V6 RT 256K PTg 512 ATg v6.0 A9WRT761 SIFLA9WRT70601 WINCC-V6 RT 256K PTg 512 ATg v6.1 A9WRT762 SIFLA9WRT70602 WINCC-V6 RT 256K PTg 512 ATg v6.2 A9WRT460 SIFLA9WRT40600 WINCC-V6 RT 64K PTg 512 ATg v6.0 A9WRT461 SIFLA9WRT40601 WINCC-V6 RT 64K PTg 512 ATg v6.1 A9WRT462 SIFLA9WRT40602 WINCC-V6 RT 64K PTg 512 ATg v6.2 A9WRT560 SIFLA9WRT50600 WINCC-V6 RT 8000 PTg 512 ATg v6.0 A9WRT561 SIFLA9WRT50601 WINCC-V6 RT 8000 PTg 512 ATg v6.1 A9WRT562 SIFLA9WRT50602 WINCC-V6 RT 8000 PTg 512 ATg v6.2 A9WSN260 SIFLA9WSN20600 WINCC-V6 WebNavigator 10 Clients v6.0 A9WSN560 SIFLA9WSN50600 WINCC-V6 WebNavigator 100 Clients v6.0 A9WSN660 SIFLA9WSN60600 WINCC-V6 WebNavigator 150 Clients v6.0 A9WSN360 SIFLA9WSN30600 WINCC-V6 WebNavigator 25 Clients v6.0 A9WSN160 SIFLA9WSN10600 WINCC-V6 WebNavigator 3 Clients v6.0 A9WSN460 SIFLA9WSN40600 WINCC-V6 WebNavigator 50 Clients v6.0 A9WVC260 SIFLA9WVC20601 WINCC-V6 WinCC Dat@M.10 Clients v6.1 A9WVC262 SIFLA9WVC20602 WINCC-V6 WinCC Dat@M.10 Clients v6.2 A9WVC560 SIFLA9WVC50601 WINCC-V6 WinCC Dat@M.100 Clients v6.1 A9WVC562 SIFLA9WVC50602 WINCC-V6 WinCC Dat@M.100 Clients v6.2 A9WVC660 SIFLA9WVC60601 WINCC-V6 WinCC Dat@M.150 Clients v6.1 A9WVC662 SIFLA9WVC60602 WINCC-V6 WinCC Dat@M.150 Clients v6.2 A9WVC360 SIFLA9WVC30601 WINCC-V6 WinCC Dat@M.25 Clients v6.1 A9WVC362 SIFLA9WVC30602 WINCC-V6 WinCC Dat@M.25 Clients v6.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 237 238 EKB Installer A9WVC160 SIFLA9WVC10601 WINCC-V6 WinCC Dat@M.3 Clients v6.1 A9WVC162 SIFLA9WVC10602 WINCC-V6 WinCC Dat@M.3 Clients v6.2 A9WVC460 SIFLA9WVC40601 WINCC-V6 WinCC Dat@M.50 Clients v6.1 A9WVC462 SIFLA9WVC40602 WINCC-V6 WinCC Dat@M.50 Clients v6.2 A9WSN261 SIFLA9WSN20601 WINCC-V6.1 WebNavigator 10 Clients v6.1 A9WSN561 SIFLA9WSN50601 WINCC-V6.1 WebNavigator 100 Clients v6.1 A9WSN661 SIFLA9WSN60601 WINCC-V6.1 WebNavigator 150 Clients v6.1 A9WSN361 SIFLA9WSN30601 WINCC-V6.1 WebNavigator 25 Clients v6.1 A9WSN161 SIFLA9WSN10601 WINCC-V6.1 WebNavigator 3 Clients v6.1 A9WSN461 SIFLA9WSN40601 WINCC-V6.1 WebNavigator 50 Clients v6.1 A9WSN262 SIFLA9WSN20602 WINCC-V6.2 WebNavigator 10 Clients v6.2 A9WSN562 SIFLA9WSN50602 WINCC-V6.2 WebNavigator 100 Clients v6.2 A9WSN662 SIFLA9WSN60602 WINCC-V6.2 WebNavigator 150 Clients v6.2 A9WSN362 SIFLA9WSN30602 WINCC-V6.2 WebNavigator 25 Clients v6.2 A9WSN162 SIFLA9WSN10602 WINCC-V6.2 WebNavigator 3 Clients v6.2 A9WSN462 SIFLA9WSN40602 WINCC-V6.2 WebNavigator 50 Clients v6.2 Y9WTG570 SIFCY9WTGX07005 WINCC-V7 Arch 10000 ATg v7.0 Y9WTG770 SIFCY9WTGX07007 WINCC-V7 Arch 120000 ATg v7.0 Y9WTG170 SIFCY9WTGX07001 WINCC-V7 Arch 1500 ATg v7.0 Y9WTG370 SIFCY9WTGX07003 WINCC-V7 Arch 30000 ATg v7.0 Y9WTG470 SIFCY9WTGX07004 WINCC-V7 Arch 4G ATg UNLIM v7.0 Y9WTG270 SIFCY9WTGX07002 WINCC-V7 Arch 5000 ATg v7.0 Y9WTG670 SIFCY9WTGX07006 WINCC-V7 Arch 80000 ATg v7.0 A9ARC700 SIFLA9ARC10700 WINCC-V7 Audit RC v7.0 A9ART170 SIFLA9ART10700 WINCC-V7 Audit RT v7.0 A9WOP170 SIFLA9WOP10700 WINCC-V7 Connectivity Pack v7.0 A9IDB470 SIFLA9IDB40700 WINCC-V7 Ind.DataBridge 10000 Tg v7.0 A9IDB170 SIFLA9IDB10700 WINCC-V7 Ind.DataBridge 128 Tg v7.0 A9IDB370 SIFLA9IDB30700 WINCC-V7 Ind.DataBridge 2048 Tg v7.0 A9IDB270 SIFLA9IDB20700 WINCC-V7 Ind.DataBridge 512 Tg v7.0 A9WLB170 SIFLA9WLB10700 WINCC-V7 Load Balancing v7.0 A9LB1070 SIFLA9LB100700 WINCC-V7 Load Balancing Step Up v7.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list A9WRC670 SIFLA9WRC60700 WINCC-V7 RC 100K PTg 512 ATg v7.0 A9WRC370 SIFLA9WRC30700 WINCC-V7 RC 1024 PTg 512 ATg v7.0 A9WRC170 SIFLA9WRC10700 WINCC-V7 RC 128 PTg 512 ATg v7.0 A9WRC870 SIFLA9WRC80700 WINCC-V7 RC 150K PTg 512 ATg v7.0 A9WRC270 SIFLA9WRC20700 WINCC-V7 RC 256 PTg 512 ATg v7.0 A9WRC770 SIFLA9WRC70700 WINCC-V7 RC 256K PTg 512 ATg v7.0 A9WRC470 SIFLA9WRC40700 WINCC-V7 RC 64K PTg 512 ATg v7.0 A9WRC570 SIFLA9WRC50700 WINCC-V7 RC 8000 PTg 512 ATg v7.0 A9WCP270 SIFLA9WCP20700 WINCC-V7 RC PO 1000 PTg 512 ATg v7.0 A9WCP770 SIFLA9WCP70700 WINCC-V7 RC PO 10000 PTg 512 ATg v7.0 A9WCP470 SIFLA9WCP40700 WINCC-V7 RC PO 2000 PTg 512 ATg v7.0 A9WCP870 SIFLA9WCP80700 WINCC-V7 RC PO 20000 PTg 512 ATg v7.0 A9WCP170 SIFLA9WCP10700 WINCC-V7 RC PO 250 PTg 512 ATg v7.0 A9WCP570 SIFLA9WCP50700 WINCC-V7 RC PO 5000 PTg 512 ATg v7.0 A9WCP670 SIFLA9WCP60700 WINCC-V7 RC PO 8500 PTg 512 ATg v7.0 A9WRT670 SIFLA9WRT60700 WINCC-V7 RT 100K PTg 512 ATg v7.0 A9WRT370 SIFLA9WRT30700 WINCC-V7 RT 1024 PTg 512 ATg v7.0 A9WRT170 SIFLA9WRT10700 WINCC-V7 RT 128 PTg 512 ATg v7.0 A9WRT870 SIFLA9WRT80700 WINCC-V7 RT 150K PTg 512 ATg v7.0 A9WRT270 SIFLA9WRT20700 WINCC-V7 RT 256 PTg 512 ATg v7.0 A9WRT770 SIFLA9WRT70700 WINCC-V7 RT 256K PTg 512 ATg v7.0 A9WRT470 SIFLA9WRT40700 WINCC-V7 RT 64K PTg 512 ATg v7.0 A9WRT570 SIFLA9WRT50700 WINCC-V7 RT 8000 PTg 512 ATg v7.0 A9WSN270 SIFLA9WSN20700 WINCC-V7 WebNavigator 10 Clients v7.0 A9WSN570 SIFLA9WSN50700 WINCC-V7 WebNavigator 100 Clients v7.0 A9WSN670 SIFLA9WSN60700 WINCC-V7 WebNavigator 150 Clients v7.0 A9WSN370 SIFLA9WSN30700 WINCC-V7 WebNavigator 25 Clients v7.0 A9WSN170 SIFLA9WSN10700 WINCC-V7 WebNavigator 3 Clients v7.0 A9WSN470 SIFLA9WSN40700 WINCC-V7 WebNavigator 50 Clients v7.0 A9WVC270 SIFLA9WVC20700 WINCC-V7 WinCC Dat@M.10 Clients v7.0 A9WVC570 SIFLA9WVC50700 WINCC-V7 WinCC Dat@M.100 Clients v7.0 A9WVC670 SIFLA9WVC60700 WINCC-V7 WinCC Dat@M.150 Clients v7.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 239 240 EKB Installer A9WVC370 SIFLA9WVC30700 WINCC-V7 WinCC Dat@M.25 Clients v7.0 A9WVC170 SIFLA9WVC10700 WINCC-V7 WinCC Dat@M.3 Clients v7.0 A9WVC470 SIFLA9WVC40700 WINCC-V7 WinCC Dat@M.50 Clients v7.0 WinLC/MP V1.x v1.0 A1LCMP10 9.1 Step7 Step7 keys Step7 STEP 7 - BASIS V5.6 STEP 7 - BASIS V5.5 STEP 7 - BASIS V5.4 STEP 7 - BASIS V5.3 STEP 7 - BASIS V5.2 STEP 7 - BASIS V5.1 STEP 7 - BASIS V5.0 STEP 7 - BASIS V4.x STEP 7 - BASIS V3.x STEP 7 - BASIS V2.x Step7 SIFLA171040506.E KB A1710455.EKB SIFLA171040505.E KB A1710454.EKB SIFLA171040504.E KB A1710453.EKB SIFLA171040503.E KB A1710452.EKB A1710451.EKB A1710405.EKB A1710404.EKB A1710403.EKB A1710402.EKB inside Combo key for v5.* PROFESSIONAL and v1* SIFLS7PROF1401.E SIFLS7PROF1401.E KB KB SIFLS7PROF0505.E SIFLS7PROF1100.E KB KB SIFLS7PROF0504.E KB SIFLS7PROF0503.E KB or Step7 Professional keys STEP 7 V5.6 PROFESSIONAL STEP 7 V5.5 PROFESSIONAL STEP 7 V5.4 PROFESSIONAL STEP 7 V5.3 PROFESSIONAL 9.2 Combo key for v5.* and v1* SIFLS7PROF1401.EKB SIFLS7PROF1401.EKB S7PROF55.E SIFLS7PROF0505.EKB SIFLS7PROF1100.EKB... KB SIFLS7PROF1400.EKB S7PROF54.E SIFLS7PROF0504.EKB KB S7PROF53.E SIFLS7PROF0503.EKB KB Step7 Professional Step7 Professional keys STEP 7 V5.6 PROFESSIONAL 2017 STEP 7 V14.0 PROFESSIONAL STEP 7 V13.0 PROFESSIONAL STEP 7 V12.0 PROFESSIONAL STEP 7 V11.0 PROFESSIONAL STEP 7 V5.5 PROFESSIONAL 2010 STEP 7 V5.4 PROFESSIONAL !!!!!!!!! SIFLS7PROF1401.EKB SIFLS7PROF1400.EKB SIFLS7PROF1300.EKB SIFLS7PROF1200.EKB SIFLS7PROF1100.EKB S7PROF55.EKB SIFLAS7PROF0505.EKB S7PROF54.EKB SIFLAS7PROF0504.EKB © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list STEP 7 V5.3 PROFESSIONAL 241 S7PROF53.EKB SIFLAS7PROF0503.EKB SIFLS7PROF1401.EKB STEP 7 V14 Professional combo for use with v5.6 and v14.0 The products STEP 7, S7-SCL, S7-GRAPH and S7-PLCSIM are also available as bundle in key "STEP 7 Professional". 9.3 Step7 Basic v10.5 (TIA Portal) TIA Portal for S7-1200 Short name Long name S7BASC105 SIFLS7BASC1005 WCBASC105 SIFLWCBASC1005 License name STEP 7 Basic v10.5 WinCC Basic v10.5 Version v10.5 v10.5 In our TIA Portal version by default installed fixed keys SISES7BASC1005 and SISEWCBASC1005 w hen this key not found © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 242 EKB Installer after installation of float keys all w ork 9.3.1 TIA Portal v10.5 RUS TIA Portal v10.5 для контроллеров S7-1200 включает в свой состав STEP 7 Basic v10.5 для контроллеров S7-1200 и WinCC Basic v10.5 для простых панелей Short name Long name License name S7BASC105 SIFLS7BASC1005 STEP 7 Basic v10.5 WCBASC105 SIFLWCBASC1005 WinCC Basic v10.5 Version v10.5 v10.5 В нашей версии TIA Portal по умолчанию устанавливаются фиксированные ключи SISES7BASC1005 и SISEWCBASC1005 и всё работает без проблем. В случае отсутствия этих ключей работа будет невозмож на © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list после установки плавающих ключей всё снова работает 9.4 BATCH Batch v7.0 Select> 751 752 753 754 755 586 587 588 589 590 591 592 593 594 595 596 597 598 Short name A1BUN070 A1BUN270 A1BUN470 A1BUN670 A1BUN970 A1BSP970 A1BSP670 A1BSP470 A1BSP270 A1BSP070 A1BROP70 A1BREC70 A1BPLA70 A1BFOR70 A1BBCC70 A1BAPS70 A1BAPI70 A1BHIE70 Long name SIFLA1BUN00700 SIFLA1BUN20700 SIFLA1BUN40700 SIFLA1BUN60700 SIFLA1BUN90700 SIFLA1BSP90700 SIFLA1BSP60700 SIFLA1BSP40700 SIFLA1BSP20700 SIFLA1BSP00700 SIFLA1BROP0700 SIFLA1BREC0700 SIFLA1BPLA0700 SIFLA1BFOR0700 SIFLA1BBCC0700 SIFLA1BAPS0700 SIFLA1BAPI0700 SIFLA1BHIE0700 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 License name BATCH 10 UNITs BATCH 20 UNITs BATCH 40 UNITs BATCH 100 UNITs BATCH unlimited BATCH Server9 unlim V7.0 BATCH Server2 1800 Obj V7.0 BATCH Server1 600 Obj V7.0 BF Server0 300 Obj V7.0 BF Server0 150 Obj V7.0 BF ROP Lib V7.0 BF Recipe System V7.0 BF Batch Planning V7.0 BF Formulas V7.0 BF BatchCC V7.0 BF API (Server) V7.0 BF API V7.0 BF Multi level Recipe V7.0 Version v7.0 v7.0 v7.0 v7.0 v7.0 v7.0 v7.0 v7.0 v7.0 v7.0 v7.0 v7.0 v7.0 v7.0 v7.0 v7.0 v7.0 v7.0 243 244 EKB Installer Calculating the units for the BATCH station License key for BATCH station A defined number of units can be operated and monitored with this license key. The number of units that can be processed depends on the utilization of the BATCH server. Example: BATCH Server (20) The license key for BATCH server is adequate for configuring up to 20 units. Requirement ? SIMATIC Manager is open. Procedure 1. In the SIMATIC Manager, select the multiproject/project for which you want to calculate the number of configured units. 2. Select the menu command Options > SIMATIC BATCH.. .The "Configure BATCH Process Cell" dialog box opens. 3. Select the "BATCH Process Cell" folder in the tree view. 4. In the "Process Cell" section, click "Check validity". 5. In the "Log" group, enable the "Validate" check box. 6. Click the "Display" button. Result A log file opens in the Internet Explorer. ? If the "Check validity" or "Compile" function shows an error in the configuration, you will need to correct the error and calculate the process objects again. ? If the configuration is free of errors, you will find the number of units configured in the multiproject/ project in the table under the heading "Units". ? You can calculate the number of configurable units based on the license keys through the Automation License Manager. Example of the layout of a log file: Plant Units Log Date, time Result <process cell name> 11 Plausibility <date, time> 0 errors, 0 warnings No. ID Error Warning Remedy © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 9.5 Braumat Actual version 7.1 Old versions Braumat install key to Hidden System folder C:\Windows\System32\LICENSE Braumat ставит свои ключи в скрытую системную папку C:\Windows\System32\LICENSE © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 245 246 9.6 EKB Installer CEMAT I can add key for Cemat v7.1 - but need Cemat v7.1 Function block PCS7 for cement manufacture Cemat v6.1 keys valid for Cemat v6.1 and v7.0 Select> Short name Long name License name Valid for Version 503 CESVR961 SIFLCESVR90601 CEMAT Server Redundancy Unlimited Clients v6.1 and 7.0 504 CESVR361 SIFLCESVR30601 CEMAT Server Redundancy 9 Clients v6.1 and 7.0 505 CESVR261 SIFLCESVR20601 CEMAT Server Redundancy 6 Clients v6.1 and 7.0 506 CESVR161 SIFLCESVR10601 CEMAT Server Redundancy 3 Clients v6.1 and 7.0 507 CESST261 SIFLCESST20601 CEMAT Single Station 6 Clients v6.1 and 7.0 508 CESST161 SIFLCESST10601 CEMAT Single Station 3 Clients v6.1 and 7.0 509 CEENG161 SIFLCEENG10601 CEMAT Engineering v6.1 and 7.0 510 CECLT161 SIFLCECLT10601 CEMAT Client v6.1 and 7.0 511 A1CERT52 CEMAT OS Software Runtime v5.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 512 A1CEMC52 CEMAT OS Software Multiclient 247 v5.2 CEMAT V7.0 http://support.automation.siemens.com/WW/view/en/27033303 Designation Order No. CEMAT Engineering Software • CEMAT OSENG V7.1 6DL5 436-8AX07-0XA0 Engineering Software, bilingual (German, English), runs under Windows XP Professional/Server 2003, Single License for 1 installation Form of supply: Software and documentation on CD, License Key Disk, Certificate of License CEMAT OS Software for Single Station incl. AS Runtime licenses (PLC) • CEMAT OSRT3 V7.0 (3 ASs) 6DL5 434-8AA07-0XA0 OS Software Single Station Runtime incl. 3 Runtime licenses for ASs (PLC), bilingual (German, English), runs under Windows XP Professional/Server 2003, Single License for 1 installation Form of supply: Software and documentation on CD, License Key Disk, Certificates of License • CEMAT OSRT6 V7.0 (6 ASs) 6DL5 434-8AB07-0XA0 OS Software Single Station Runtime incl. 6 Runtime licenses for ASs (PLC), bilingual (German, English), runs under Windows XP Professional/Server 2003, Single License for 1 installation Form of supply: Software and documentation on CD, License Key Disk, Certificates of License CEMAT OS Software for Client • CEMAT MC V7.0 6DL5 435-8AX07-0XA0 OS Software Client Runtime, bilingual (German, English), runs under Windows XP Professional, Single License for 1 installation Form of supply: Software and documentation on CD, License Key Disk, Certificate of License CEMAT OS Software for redundant servers incl. AS Runtime licenses (PLC) • CEMAT RSRT3 V7.0 (3 ASs) 6DL5 433-8AA07-0XA0 OS Software Runtime for redundant pair of servers, incl. Runtime © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 248 EKB Installer licenses for 3 ASs (PLC), bilingual (German, English), runs under Windows Server 2003, Single License for 2 installations Form of supply: Software and documentation on CD, License Key Disk, Certificates of License • CEMAT RSRT6 V7.0 (6 ASs) 6DL5 433-8AB07-0XA0 OS Software Runtime for redundant pair of servers, incl. Runtime licenses for 6 ASs (PLC), bilingual (German, English), runs under Windows Server 2003, Single License for 2 installations Form of supply: Software and documentation on CD, License Key Disk, Certificates of License • CEMAT RSRT9 V7.0 (9 ASs) 6DL5 433-8AC07-0XA0 OS Software Runtime for redundant pair of servers, incl. Runtime licenses for 9 ASs (PLC), bilingual (German, English), runs under Windows Server 2003, Single License for 2 installations Form of supply: Software and documentation on CD, License Key Disk, Certificates of License • CEMAT RSRTU V7.0 (unlimited ASs) 6DL5 433-8AD07-0XA0 OS Software Runtime for redundant pair of servers, incl. Runtime licenses for unlimited ASs (PLC), bilingual (German, English), runs under Windows Server 2003, Single License for 2 installations Form of supply: Software and documentation on CD, License Key Disk, Certificates of License CEMAT OS PowerPacks for redundant pair of servers for expansion ofAS Runtime licenses OS PowerPack for redundant pair of servers, for expansion of AS Runtime licenses, bilingual (German, English), runs under Windows Server 2003, Single License for 2 installations Form of supply: License Key Disk, Certificates of License • CEMAT PRSRT6 V7.0 for expansion of the Runtime licenses from 3 to 6 ASs 6DL5 433-8AB07-0XD0 • CEMAT PRSRT9 V7.0 for expansion of the Runtime licenses from 6 to 9 ASs 6DL5 433-8AC07-0XD0 • CEMAT PRSRTU V7.0 for expansion of the Runtime licenses from 9 to unlimited ASs 6DL5 433-8AD07-0XD0 CEMAT BOX 416 Runtime System V7.0 Bundle • CEMAT BOX 416 Runtime System V7.0 (3 AS) Bundle consisting of: 6DL5 438-1AA © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 249 - SIMATIC PCS 7 BOX 416 Runtime System (AS/OS) - CEMAT OSRT3 V7.0 (3 ASs) 9.7 CFC v7.1 v7.0 v6.1 CFC Step7 - Option SIFLA1CFCS0701 SIFLA1CFCS0700 SIFLA1CFCS0601 CFC Unlimited Tags SIFLA1CFCU0701 SIFLA1CFCU0700 SIFLA1CFCU0601 CFC 5000 Tags SIFLA1CFCD0701 SIFLA1CFCD0700 SIFLA1CFCD0601 CFC 3000 Tags SIFLA1CFC90701 SIFLA1CFC90700 SIFLA1CFC90601 CFC 2000 Tags SIFLA1CFC70701 SIFLA1CFC70700 SIFLA1CFC70601 CFC 1000 Tags SIFLA1CFC50701 SIFLA1CFC50700 SIFLA1CFC50601 CFC 500 Tags SIFLA1CFC30701 SIFLA1CFC30700 SIFLA1CFC30601 CFC 250 Tags SIFLA1CFC10701 SIFLA1CFC10700 SIFLA1CFC10601 CFC STEP 7 Simotion SIFLA1CFCM0701 SIFLA1CFCM0700 CFC STEP 7 Sinamics SIFLA1CFCN0701 SIFLA1CFCN0700 9.7.1 v6.0 SIFLA1CFCS0600 SIFLA1CFCU0600 SIFLA1CFCD0600 SIFLA1CFC90600 SIFLA1CFC70600 SIFLA1CFC50600 SIFLA1CFC30600 SIFLA1CFC10600 CFC Download Warnning see SIMATIC PCS 7 V7.0 licensing model CFC Download Warnning Warnning wrote: The license available is not sufficient for the configured process objects (54). Please upgrade to another license or book the process objects in programs which are no longer necessary back to the existing license. You can continue the download process, however. Please see the notes in the help file. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 250 EKB Installer © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 251 252 9.8 9.9 9.10 EKB Installer DocPro 473 A1DOCP0 3 DOCPRO V3.x v3.x 472 A1DOCP0 5 DOCPRO V5.x v5.x 471 A1DOCP5 SIFLA1DOCP05 1 01 DOCPRO V5.1 v5.1 843 A1DOCP5 SIFLA1DOCP05 4 04 DOCPRO v5.4 v5.4 D7-SYS D7-SYS Select> Short name 944 Long name License name Version A1DSYS70 SIFLA1DSYS0700 D7-SYS v7.0 v7.0 617 A1SFCT70 SIFLA1SFCT0700 SFC for TDC v7.0 368 A1SFCT61 SIFLA1SFCT0601 SFC for D7-SYS v6.1 461 A1DSYS62 SIFLA1DSYS0602 D7-SYS v6.2 v6.2 462 A1DSYS61 D7-SYS v6.1 v6.1 iMAP Select> Short name Long name License name Version 677 A1IMAP30 SIFLA1IMAP0300 iMap v3.0 678 A1IMAP20 iMap v2.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 9.11 9.12 253 S7-GRAPH 406 A1S7GR03 S7-GRAPH V3.x v3.x 405 A1S7GR04 S7-GRAPH V4.x v4.x 404 A1S7GR05 S7-GRAPH V5.x v5.x 403 A1S7GR51 S7-GRAPH V5.1 v5.1 402 A1S7GR52 S7-GRAPH V5.2 v5.2 401 A1S7GR53 SIFLA1S7GR050 3 S7-GRAPH V5.3 v5.3 400 A1S7GR54 SIFLA1S7GR050 4 S7-GRAPH V5.4 v5.4 448 A1LOGS1 0 Logon - Logon Service v1.0 447 A1LOGS1 2 SIFLA1LOGS010 Logon - Logon Service 1.2 2 v1.2 446 A1LOGS1 3 SIFLA1LOGS010 Logon - Logon Service 1.3 3 v1.3 667 A1LOGS1 4 SIFLA1LOGS010 Logon - Logon Service 1.4 4 v1.4 Logon 9.12.1 Logon Rus SIMATIC Logon предназначен для централизованного, общ епроизводственного управления пользователями, интегрированного в систему управления пользователями Windows. Администраторы могут создавать и отключать пользователей в масштабах всей компании. 9.13 Maintenance WinCC/MaintenancePCS7 v7.1 WinCC/Maintenance Station 2009 WinCC/Maintenance Station 2007 See Calculating the asset tags (hardware components) for the maintenance station 9.13.1 Maintenance Station 2009 Enter topic text here. Short name 1189 Long name SMSRT2020 SIFLSMSRT20200 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 License name Version Maintenance Station 2009 Runtime v2.0 254 EKB Installer 1190 SMSRT1020 SIFLSMSRT10200 Maintenance Station 2009 Runtime v2.0 1191 YSMSR020 SIFCYSMSR002003 Maintenance Station 2009 Runtime (1000) v2.0 1192 YSMSR020 SIFCYSMSR002002 Maintenance Station 2009 Runtime (500) v2.0 1193 YSMSR020 SIFCYSMSR002000 Maintenance Station 2009 Runtime (100) v2.0 9.13.2 Maintenance Station 2007 WinCC/Maintenance Station 2007 See Calculating the asset tags (hardware components) for the maintenance station Short name Long name License name Version 739 MAINES70 SIFLMAINES0700 Maintenance ES V7.0 v7.0 740 YMAINR70 SIFLYMAINR0700 Maintenance RT V7.0 (unlimited) v7.0 741 YMAINR71 SIFCYMAINR0700 1 Maintenance RT V7.0 (10) v7.0 742 YMAINR74 SIFCYMAINR0700 4 Maintenance RT V7.0 (100) v7.0 1107 YMAINR75 SIFCYMAINR0700 5 Maintenance RT V7.0 (250) v7.0 767 YMAINR76 SIFCYMAINR0700 6 Maintenance RT V7.0 (500) v7.0 743 YMAINR77 SIFCYMAINR0700 7 Maintenance RT V7.0 (1000) v7.0 Order No. Description 6ES7840-0WD000YA0 SIMATIC Maintenance Station 2007 Engineering SW (Floating License) RT license for 100 devices (Single License, count relevant) 6ES7840-0WD000YA7 SIMATIC Maintenance Station 2007 Engineering SW (Floating License) RT license for 100 devices , Trial (Trial License for 30 days) 6ES7840-0WD100YD0 SIMATIC Maintenance Station Powerpack 100 RT license for 100 additional devices (Single License, count relevant) 6ES7840-0WD200YD0 SIMATIC Maintenance Station Powerpack 500 RT license for 500 additional devices (Single License, count relevant) © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 6ES7840-0WD300YD0 255 SIMATIC Maintenance Station Powerpack 1000 RT license for 1000 additional devices (Single License, count relevant) The Power Packs are independent of the current version. You can install unlimited key SIFLYMAINR0700, or count's key SIFCYMAINR0700* 9.13.3 Maintenance PCS 7.1 Maintenance ES PCS7 v7.1 Short name Long name License name Version 1194 MAINES71 SIFLMAINES0701 Maintenance ES V7.1 v7.1 1195 YMAINR7 SIFLYMAINR0701 0 Maintenance RT V7.1 (unlimited) v7.1 1196 YMAINR7 SIFCYMAINR0701 Maintenance RT V7.1 (10) 1 1 v7.1 1197 YMAINR7 SIFCYMAINR0701 Maintenance RT V7.1 (100) 4 4 v7.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 256 EKB Installer 1198 9.14 YMAINR7 SIFCYMAINR0701 Maintenance RT V7.1 (1000) 7 7 v7.1 Modular Safety System ES 2008 http://support.automation.siemens.com/WW/view/en/30319329 Modular Safety System ES is the engineering software package for configuration, start-up and diagnostics of the 3RK3 modular safety system. The software combines the configuring of the hardware, the programming of the safety functions and the testing and diagnostics of the safety system. The parameterization software forms part of the Modular Safety System and replaces laborious wiring of the individual functions by fast and easy parameterization. All function elements can be placed via drag & drop. All functions – whether safety or logic functions – are provided as blocks and can also be interlinked. MSS training video http://support.autom ation.siem ens.com /WW/view /en/29072826 9.15 Motor Starter Motor Starter ES 2007 http://support.automation.siemens.com/WW/view/de/27102268 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 257 http://support.automation.siemens.com/WW/llisapi.dll/csfetch/27102268/ Motor_Starter_ES_2007.zip ( 206876 KB ) 821 MSTESP40 SIFLMSTESP0400 Motor Starter ES 2007 Premium v4.0 822 MSTESS40 SIFLMSTESS0400 Motor Starter ES 2007 Standard v4.0 823 MSTESB40 SIFLMSTESB0400 Motor Starter ES 2007 Basic v4.0 Motor Starter ES 2007 Premium for the connection to one or several motor starters via PROFIBUS DP or PROFINET or directly on the device via the system interface. Motor Starter ES 2007 Standard for direct connection to the motor starters via the system interface on the device, for parameterization and diagnostics. Motor Starter ES 2007 Basic for direct connection to the motor starters via the system interface on the device. 9.16 Net Products without installed license key are in “Trial Mode“ and the lack of a license will be indicated during use. http://support.automation.siemens.com/WW/view/en/24290429 With the complete implementation of the A&D licensing concept it became necessary with some SIMATIC NET PC software products of Edition 2006 to distribute the license keys according to function. For example, with SOFTNET S7 IE Edition 2006 you get three license keys: One SOFTNET S7 Basic Key SIFLNSIEPG0604 for PG/OP communication, i.e. communication is enabled in general. One SOFTNET S7 Lean Key SIFLNSIESL0604 for the use of 1 to 8 connections via Industrial Ethernet. One SOFTNET S7 Powerpack Key SIFLNSIESE0604 for the use more than 8 connections (9 to 64) via Industrial Ethernet. Other SIMATIC NET PC software products that have more than one License Key are: S7 REDCONNECT, here the S7 1613 Key SIFLNHIES70604 and the S7 REDCONNECT Key SIFLNIERCN0604 are supplied. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 258 EKB Installer Upgrade packages for SIMATIC NET PC software products of Edition 2006, here an Upgrade Key plus up to two License Keys are supplied depending on the product. Note: The SIMATIC NET PC software appropriate for the licenses and the Automation License Manager (ALM) supplied must be installed to be able to install and use the license keys. Please note that all the license keys of a SIMATIC NET PC software product must be installed to be able to use the full function range of the software, because the new license keys now enable those features that you have procured as a SIMATIC NET PC software product without any overlapping. <6.4 v6.4 (2006) v7.0 (2007) v7.1 (2008) A9SHL SIFLNIE SIFLNIE SIFLNIE NET Industrial Ethernet also S7 1613 Key is A90 RCN0604 RCN0700 RCN070 S7-REDCONNECT required SIFLA 1 0SHLA 0601 SIFLNHI SIFLNHI SIFLNHI NET Industrial Ethernet ES70604 ES70700 ES70701 S7-1613 SIFLNHP SIFLNHP SIFLNH NET PROFIBUS DPBDP0604 BDP0700 PBDP07 5613 01 SIFLNHP SIFLNHP SIFLNH NET PROFIBUS BFM0604 BFM0700 PBFM07 FMS-5613 01 SIFLNHP SIFLNHP SIFLNH NET PROFIBUS S7BS70604 BS70700 PBS7070 5613 1 A9SCB SIFLNOP SIFLNOP SIFLNO NET Industrial Ethernet AN0 CCB0604 CCB0700 PCCB07 PN CBA OPC-Server 01 A9SO DXN0 SIFLNOP SIFLNOP SIFLNO NET DX OPC-Server CDX0604 CDX0700 PCDX07 01 A9SN SIFLNOP SIFLNOP SIFLNO NET SNMP-OPCMPN0 CSB0604 CSB0700 PCSB07 Server Basic 01 Administration of up to 20 IP addresses © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 259 A9SN SIFLNOP SIFLNOP SIFLNO NET SNMP-OPCMUN0 CSE0604 CSE0700 PCSE07 Server Power Pack 01 Administration of up to 200 IP addresses Expansion from Basic to Extended A9SN MXN0 SIFLA 0SNM X0601 Administration of up to 200 IP addresses NET SNMP-OPCServer-S7 Extended SIFLNSIE SIFLNSIE SIFLNSI NET Industrial Ethernet for PG/OP PG0604 PG0700 EPG070 SOFTNET-S7 Basis communication, i.e. 1 communication is enabled in general SIFLNSIE SIFLNSIE SIFLNSI NET Industrial Ethernet PN0604 PN0700 EPN070 SOFTNET PN IO 1 SIFLNSIE SIFLNSIE SIFLNSI NET Industrial Ethernet for the use more than 8 SE0604 SE0700 ESE0701 SOFTNET-S7 Power connections (9 to 64) via Pack Industrial Ethernet A9SNE SIFLNSIE SIFLNSIE SIFLNSI NET Industrial Ethernet for the use of 1 to 8 L90 SL0604 SL0700 ESL0701 SOFTNET-S7 Lean connections via Industrial Ethernet A9SNE SIFLNSP SIFLNSP SIFLNS NET PROFIBUS P90 BDP0604 BDP0700 PBDP07 SOFTNET-DP 01 A9SDP SIFLNSP SIFLNSP SIFLNS NET PROFIBUS S90 BDS0604 BDS0700 PBDS07 SOFTNET-DP Slave 01 A9SNE SIFLNSP SIFLNSP SIFLNS NET PROFIBUS X90 BS70604 BS70700 PBS7070 SOFTNET-S7 1 A9SSS CN0 NET Ind. Ethernet SOFTNET-Security Client V1.0 A9SSP IN0 S7/SR Ind. Ethernet SOFTNET-S7 V6.3 A9SS5 2N0 S7-5412/Windows NT A9SS5 NET PROFIBUS-S7 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 260 EKB Installer 290 A9SS1 3N0 S7/SR Ind.Ethernet Windows NT A9SS1 390 SIFLA 0SS13 0601 NET Industrial EthernetS7 A9SPI E60 SD-PMS Industrial ETHERNET A9SP5 290 NET PROFIBUS-PG A9S5I E60 S5-PMS A9SOP CN0 NET OPC-Server-DP A9SOP 7N0 NET OPC-Server-S7 A9SOL D90 DP/OLE-Manager/ Windows A9SNE M90 SIFLA 0SNE M0601 NET BCE/Windows 2000 A9SF5 290 NET PG-5412 A9SD5 2N0 DP-5412/Windows NT A9SD5 290 NET PROFIBUS-DP A9SC7 P93 SIN/NCMS7 PROFIBUS V4.x WINDOWS NT A9SC7 E93 SIN/NCMS7 - Ind. Ethernet V4.x WINDOWS NT A1S7N NetPro V6.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 261 P60 A1S7N P02 NetPro V2.1 9.16.1 Net 2008 v8.1 Net2011 v8.1 Select> Short name Long name License name Version 1394 NSIEPG99 SIFLNSIEPG9999 NET Industrial Ethernet SOFTNET-S7 Basis v99.9 1395 NSIESL99 SIFLNSIESL9999 NET Industrial Ethernet SOFTNET-S7 Lean v99.9 1359 NIERCN81 SIFLNIERCN0801 NET Industrial Ethernet S7REDCONNECT v8.1 1360 NHIES781 SIFLNHIES70801 NET Industrial Ethernet S7-1613 v8.1 1361 NHPBDP81 SIFLNHPBDP0801 NET PROFIBUS DP-5613 1362 NHPBFM81 SIFLNHPBFM080 1 1363 NHPBS781 SIFLNHPBS70801 NET PROFIBUS S7-5613 v8.1 1364 NOPCCB81 SIFLNOPCCB0801 NET Industrial Ethernet PN CBA OPCServer v8.1 1365 NOPCDX81 SIFLNOPCDX080 1 v8.1 1366 NOPCSB81 SIFLNOPCSB0801 NET SNMP-OPC-Server Basic © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 NET PROFIBUS FMS-5613 NET DX OPC-Server v8.1 v8.1 v8.1 262 EKB Installer 1367 NOPCSE81 SIFLNOPCSE0801 NET SNMP-OPC-Server Power Pack v8.1 1368 NSIEPG81 SIFLNSIEPG0801 NET Industrial Ethernet SOFTNET-S7 Basis v8.1 1369 NSIEPN81 SIFLNSIEPN0801 NET Industrial Ethernet SOFTNET PN IO v8.1 1370 NSIESE81 SIFLNSIESE0801 NET Industrial Ethernet SOFTNET-S7 Power Pack v8.1 1371 NSIESL81 SIFLNSIESL0801 NET Industrial Ethernet SOFTNET-S7 Lean v8.1 1372 NSPBDP81 SIFLNSPBDP0801 NET PROFIBUS SOFTNET-DP v8.1 1373 NSPBDS81 SIFLNSPBDS0801 NET PROFIBUS SOFTNET-DP Slave v8.1 1374 NSPBS781 SIFLNSPBS70801 NET PROFIBUS SOFTNET-S7 v8.1 1375 NSIEL781 SIFLSNSIEL0801 NET PROFIBUS SOFTNET-S7 v8.1 1387 NOPCSR81 SIFLNOPCSR0801 NET S7 OPC REDUNDANCY v8.1 1352 A9SSSC20 SIFLA9SSSC0200 v2.0 SOFTNET Security Client 9.16.2 Net 2008 v7.1 http://support.automation.siemens.com/WW/view/en/31675909 1111 NIERCN71 SIFLNIERCN0701 NET Industrial Ethernet S7REDCONNECT v7.1 1112 NHIES771 SIFLNHIES70701 NET Industrial Ethernet S7-1613 v7.1 1113 NHPBDP71 SIFLNHPBDP0701 NET PROFIBUS DP-5613 v7.1 1114 NHPBFM71 SIFLNHPBFM070 1 NET PROFIBUS FMS-5613 v7.1 1115 NHPBS771 NET PROFIBUS S7-5613 v7.1 1116 NOPCCB71 SIFLNOPCCB070 NET Industrial Ethernet PN CBA OPC1 Server v7.1 1117 NOPCDX71 SIFLNOPCDX070 v7.1 SIFLNHPBS70701 NET DX OPC-Server © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 1111 NIERCN71 SIFLNIERCN0701 263 NET Industrial Ethernet S7REDCONNECT v7.1 NET SNMP-OPC-Server Basic v7.1 1 1118 NOPCSB71 SIFLNOPCSB070 1 1119 NOPCSE71 SIFLNOPCSE0701 NET SNMP-OPC-Server Power Pack v7.1 1120 NSIEPG71 SIFLNSIEPG0701 NET Industrial Ethernet SOFTNET-S7 Basis v7.1 1121 NSIEPN71 SIFLNSIEPN0701 NET Industrial Ethernet SOFTNET PN IO v7.1 1122 NSIESE71 SIFLNSIESE0701 NET Industrial Ethernet SOFTNET-S7 Power Pack v7.1 1123 NSIESL71 SIFLNSIESL0701 NET Industrial Ethernet SOFTNET-S7 Lean v7.1 1124 NSPBDP71 SIFLNSPBDP0701 NET PROFIBUS SOFTNET-DP v7.1 1125 NSPBDS71 SIFLNSPBDS0701 NET PROFIBUS SOFTNET-DP Slave v7.1 1126 NSPBS771 SIFLNSPBS70701 NET PROFIBUS SOFTNET-S7 v7.1 1127 NSIEL771 SIFLSNSIEL0701 NET PROFIBUS SOFTNET-S7 v7.1 9.16.3 NET 2007 v7.0 Net2007 http://support.automation.siemens.com/WW/view/en/27011548 Select> Short name Long name License name Vers ion 824 NIERCN70 SIFLNIERCN070 0 NET Industrial Ethernet S7REDCONNECT v7.0 825 NHIES770 NET Industrial Ethernet S7-1613 v7.0 826 NHPBDP70 SIFLNHPBDP070 0 NET PROFIBUS DP-5613 v7.0 827 NHPBFM7 SIFLNHPBFM070 NET PROFIBUS FMS-5613 0 0 v7.0 828 NHPBS770 SIFLNHPBS7070 0 v7.0 829 NOPCCB7 SIFLNOPCCB070 NET Industrial Ethernet PN CBA OPC0 0 Server v7.0 830 NOPCDX7 SIFLNOPCDX070 NET DX OPC-Server 0 0 v7.0 SIFLNHIES70700 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 NET PROFIBUS S7-5613 264 EKB Installer 831 NOPCSB7 0 832 SIFLNOPCSB070 0 NET SNMP-OPC-Server Basic v7.0 NOPCSE70 SIFLNOPCSE070 0 NET SNMP-OPC-Server Power Pack v7.0 833 NSIEPG70 NET Industrial Ethernet SOFTNET-S7 Basis v7.0 834 NSIEPN70 SIFLNSIEPN0700 NET Industrial Ethernet SOFTNET PN IO v7.0 835 NSIESE70 SIFLNSIESE0700 NET Industrial Ethernet SOFTNET-S7 Power Pack v7.0 836 NSIESL70 SIFLNSIESL0700 NET Industrial Ethernet SOFTNET-S7 Lean v7.0 837 NSPBDP70 SIFLNSPBDP070 0 NET PROFIBUS SOFTNET-DP v7.0 838 NSPBDS70 SIFLNSPBDS070 0 NET PROFIBUS SOFTNET-DP Slave v7.0 839 NSPBS770 SIFLNSPBS70700 NET PROFIBUS SOFTNET-S7 SIFLNSIEPG0700 v7.0 9.16.4 NET 2006 v6.4 Net2006 Select> Short name Long name License name Version 679 NIERCN64 SIFLNIERCN0604 NET Industrial Ethernet S7REDCONNECT v6.4 680 NHIES764 SIFLNHIES70604 NET Industrial Ethernet S7-1613 v6.4 681 NHPBDP64 SIFLNHPBDP0604 NET PROFIBUS DP-5613 v6.4 682 NHPBFM64 SIFLNHPBFM060 4 NET PROFIBUS FMS-5613 v6.4 683 NHPBS764 NET PROFIBUS S7-5613 v6.4 684 NOPCCB64 SIFLNOPCCB060 NET Industrial Ethernet PN CBA v6.4 4 OPC-Server 685 NOPCDX64 SIFLNOPCDX060 4 686 NOPCSB64 SIFLNOPCSB0604 NET SNMP-OPC-Server Basic 687 NOPCSE64 SIFLNOPCSE0604 NET SNMP-OPC-Server Power v6.4 Pack 688 NSIEPG64 SIFLNHPBS70604 SIFLNSIEPG0604 NET DX OPC-Server NET Industrial Ethernet v6.4 v6.4 v6.4 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 265 SOFTNET-S7 Basis 689 NSIEPN64 SIFLNSIEPN0604 NET Industrial Ethernet SOFTNET PN IO v6.4 690 NSIESE64 SIFLNSIESE0604 NET Industrial Ethernet SOFTNET-S7 Power Pack v6.4 691 NSIESL64 SIFLNSIESL0604 NET Industrial Ethernet SOFTNET-S7 Lean v6.4 692 NSPBDP64 SIFLNSPBDP0604 NET PROFIBUS SOFTNET-DP v6.4 693 NSPBDS64 SIFLNSPBDS0604 NET PROFIBUS SOFTNET-DP v6.4 Slave 694 NSPBS764 NET PROFIBUS SOFTNET-S7 v6.4 SIFLNSPBS70604 9.16.5 Net 2005 and < Enter topic text here. 9.16.6 Which license do you need for S7 REDCONNECT? Which license do you need for S7 REDCONNECT? http://support.automation.siemens.com/WW/view/en/20710190 Software package S7 REDCONNECT Description Contains the functions of the software package S7-1613 plus redundant SIFL communication via S7 connections. NHIE Available licenses: * SIMATIC NET OPC server * Industrial Ethernet S7-1613 * Industrial Ethernet S7 REDCONNECT S7 REDCONNECT upgrade POWERPACK S7 REDCONNECT S707 01 SIFL NIER CN0 701 Contains the functions of the software package S7-1613 plus redundant communication via S7 connections to the upgrade of an earlier S7 REDCONNECT license. Available licenses: * SIMATIC NET OPC server * Industrial Ethernet S7-1613 * Industrial Ethernet S7 REDCONNECT Extension of the S7-1613 license to S7 REDCONNECT for using the redundant communication via S7 connections. Available licenses: * Industrial Ethernet S7 REDCONNECT SIFL NIER CN0 701 Example: You have a SIMATIC PC with one CP1613 and the "Industrial Ethernet S7-1613" license. You need a second CP1613 and the "POWERPACK S7 REDCONNECT" software package to be able to © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 266 EKB Installer operate this PC properly with an H system in a redundant network (redundant system bus). SIFLNIERCN07 NET Industrial Ethernet S701 REDCONNECT S5-compatible communication(SR) SIFLNHIES707 01 NET Industrial Ethernet S7-1613 S7 communication SIFLNHPBDP0 701 NET PROFIBUS DP-5613 PROFIBUS-DP S5-compatible communication (FDL) SIFLNHPBFM0 NET PROFIBUS FMS-5613 701 FMS communication SIFLNHPBS707 NET PROFIBUS S7-5613 01 S7 communication SIFLNOPCCB0 NET Industrial Ethernet PN CBA 701 OPC-Server PROFINET CBA requires the iMAP configuration tool. SIFLNOPCDX0 NET DX OPC-Server 701 Data Exchange SIFLNOPCSB0 701 NET SNMP-OPC-Server Basic SNMP access via OPC Administration of up to 20 IP addresses SIFLNOPCSE0 NET SNMP-OPC-Server Power 701 Pack SNMP access via OPC Administration of up to 200 IP addresses SIFLNSIEPG07 NET Industrial Ethernet SOFTNET01 S7 Basis SIFLNSIEPN07 NET Industrial Ethernet SOFTNET 01 PN IO SIFLNSIESE07 NET Industrial Ethernet SOFTNET01 S7 Power Pack SIFLNSIESL07 NET Industrial Ethernet SOFTNET01 S7 Lean S7 communication S5-compatible communication(SR) SIFLNSPBDP0 701 NET PROFIBUS SOFTNET-DP PROFIBUS-DP S5-compatible communication(FDL) SIFLNSPBDS0 701 NET PROFIBUS SOFTNET-DP Slave PROFIBUS-DP (slave) SIFLNSPBS707 NET PROFIBUS SOFTNET-S7 01 SIFLSNSIEL07 NET PROFIBUS SOFTNET-S7 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list SIFLNIERCN07 NET Industrial Ethernet S701 REDCONNECT 267 S5-compatible communication(SR) 01 9.16.7 FAQ Russian Вопрос: Купили карточку CP5613 А2; лицензию на Simatic net Profibus DP-5613 и Simatic net Profibus-S7; ПО на Simatic net. Устанавливаю ПО и железо. Запускаю Configuration Console и в протоколе оставляю галочку только у DP (Хочу считать данные из CPU-315 2DP). В Access points у DPSONLINE выбираю инетрфейс CP5613A2(PROFIBUS). Запускаю OPC-Scout и в локальном сервере OPC.SimaticNET создаю группу CP5613 и в ней содаю Item (по умолчанию предлагает DP:[SYSTEM]&version()). Изменяю на DP:[CP 5613]MW4 что бы считать 4-е слово меркеров (таким же синтаксисом через протокол S7 считывал данные строкой - S7:[CP 5611]MW4, причем через карточку CP5613 А2, отключив предварительно протокол DP в Configuration Console и выбрав в Access points S7ONLINE -но выскакивает сообщение о отсутствии лиценьзии для работы через протокол S7). Создав итем, нажимаю Ок, выскакивает сообщение о ошибке - The item definition does not exist in the server address space. Вообще,можно ли считать данные из CPU-315 2DP используя вышеперечисленное ПО и оборудование и если можно, то какие действия надо при этом совершить, какой синтаксис пролисать в OPC-Scout? Ответ Начнем с того, что если Вы хотите считать данные с любого CPU через интерфейс PB, не делая этот интерфейс ведомым устройством, то использовать надо лицензию S75613 (в Вашем случае). Лицензия DP-5613 используется только для связи СР5613, как мастер устройства, и любых ведомых устройств, в том числе и 315-2DP, как ведомое устройство. Для организации связи через протокол S7 необходимо организовать S7-соединение. Оно программируется. Описание последовательности шагов программирования можно найти в документации, которая находится на Вашем компьютере в разделе SIMATIC\Docum., SIMATIC NET-Commissioning PC Station. В этом описании лучше взять за пример главу 7 связь ОРС Сервера через Ethernet разници в параметрировании никакой нет. Глава 8 описывает пример связи СР5613 с © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 268 EKB Installer ведомыми устройствами. 9.17 9.18 PDiagn 429 A1PDIA03 S7-PDIAG V3.x v3.x 428 A1PDIA04 S7-PDIAG V4.x v4.x 427 A1PDIA05 S7-PDIAG V5.x v5.x 426 A1PDIA51 S7-PDIAG V5.1 v5.1 425 A1PDIA52 S7-PDIAG V5.2 v5.2 424 A1PDIA53 SIFLA1PDIA050 3 S7-PDIAG V5.3 v5.3 423 A1PDIA54 SIFLA1PDIA050 4 S7-PDIAG V5.4 v5.4 PDM 290. 291. 292. 293. 294. 295. 296. 297. 298. 299. 300. 301. 302. 303. 304. 305. 306. 307. 308. 309. 310. 311. 312. 313. 314. 315. 316. 317. 318. 319. A3SPT901 A3SPT801 A3SPT701 A3SPT601 A3SPT501 A3SPT401 A3SPT301 A3SPT101 A3SPR401 A3SPR201 A3SPIE01 A3SPHX01 A3SPHM01 A3SPHB01 A3SPDP01 A3SPD101 A3SPT960 SIFLA3SPT90600 A3SPT860 SIFLA3SPT80600 A3SPT760 SIFLA3SPT70600 A3SPT660 SIFLA3SPT60600 A3SPT560 SIFLA3SPT50600 A3SPT460 SIFLA3SPT40600 A3SPT360 SIFLA3SPT30600 A3SPT160 SIFLA3SPT10600 A3SPSP60 SIFLA3SPSP0600 A3SPR460 SIFLA3SPR40600 A3SPR260 SIFLA3SPR20600 A3SPIE60 SIFLA3SPIE0600 A3SPHX60 SIFLA3SPHX0600 A3SPHM60 SIFLA3SPHM0600 PDM Tag Count unlimited PDM max. 16384 Tags PDM max. 8192 Tags PDM max. 4096 Tags PDM up to 2048 TAGs PDM up to 1024 TAGs PDM max. 512 Tags PDM max. 128 Tags PDM RS 485 PDM RS 232 PDM Routing PDM HART Mux PDM HART Modem PDM ET200 HART PDM Profibus DP/PA PDM Diagnosis PDM Tag Count unlimited PDM up to 16384TAGs PDM up to 8192TAGs PDM up to 4096TAGs PDM up to 2048 TAGs PDM up to 1024 TAGs PDM max. 512 Tags PDM max. 128 Tags PDM Routing PDM RS 485 PDM RS 232 PDM Routing PDM HART Mux PDM HART Modem SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 320. 321. 322. 323. 324. 325. 326. 327. 328. 329. 330. 331. A3SPHB60 SIFLA3SPHB0600 A3SPDP60 SIFLA3SPDP0600 A3SPD160 SIFLA3SPD10600 A3SPBI60 SIFLA3SPBI0600 A3SPBS60 SIFLA3SPBS0600 A3SPBE60 SIFLA3SPBE0600 A3SPBS04 A3SPBS03 A3SPBS02 A3SPBS01 A3SPBI01 A3SPBE01 1516 A3SPT961 SIFLA3SPT90601 PDM Tag Count unlimited v6.1 1517 A3SPT861 SIFLA3SPT80601 PDM up to 16384 TAGs v6.1 1518 A3SPT761 SIFLA3SPT70601 PDM up to 8192 TAGs v6.1 1519 A3SPT661 SIFLA3SPT60601 PDM up to 4096 TAGs v6.1 1520 A3SPT561 SIFLA3SPT50601 PDM up to 2048 TAGs v6.1 1521 A3SPT461 SIFLA3SPT40601 PDM up to 1024 TAGs v6.1 1522 A3SPT361 SIFLA3SPT30601 PDM max. 512 Tags v6.1 1523 A3SPT161 SIFLA3SPT10601 PDM max. 128 Tags v6.1 1524 A3SPSP61 SIFLA3SPSP0601 PDM Routing v6.1 1525 A3SPR461 SIFLA3SPR40601 PDM RS 485 v6.1 1526 A3SPR261 SIFLA3SPR20601 PDM RS 232 v6.1 1527 A3SPIE61 SIFLA3SPIE0601 PDM Routing v6.1 1528 A3SPHX61 SIFLA3SPHX0601 PDM HART Mux v6.1 1529 A3SPHM61 SIFLA3SPHM0601 PDM HART Modem v6.1 1530 A3SPHB61 SIFLA3SPHB0601 v6.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 PDM ET200 HART PDM Profibus DP/PA PDM Diagnosis PDM Basis Integrated v6.0 PDM Basis Software V6.0 PDM Basis Evaluation v6.0 PDM Basis Software V5.2 PDM Basis Standalone V5.1 PDM Basis Standalone V5 PDM Basis Standalone PDM Basis Integrated PDM Basis Evaluation PDM ET200 HART 269 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 270 9.19 EKB Installer 1531 A3SPDP61 SIFLA3SPDP0601 PDM Profibus DP/PA v6.1 1532 A3SPD161 SIFLA3SPD10601 PDM Diagnosis v6.1 1533 A3SPBI61 SIFLA3SPBI0601 PDM Basis Integrated v6.1 v6.1 1534 A3SPBS61 SIFLA3SPBS0601 PDM Basis Software v6.1 v6.1 1535 A3SPBE61 SIFLA3SPBE0601 PDM Basis Evaluation v6.1 v6.1 Short name Long name PID License name Version S7 Standard PID Tool V5.x v5.x PCS7 PID-Tuner V6.1 v6.1 361 A1STDC05 421 A1PIDT61 422 A1PIDT51 PCS7 PID-Tuner V5.1 v5.1 563 A1730202 S7 Standard PID Tool V2.x, V4.0 v2.x 564 A1730105 Modular PID Control 5.x v5.x 565 A1730103 S7 Modular PID Tool V3.x, V4.0 v3.x 730 A1PIDT70 PCS7 PID-Tuner V7.0 v7.0 943 A1STDC52 SIFLA1STDC0502 Standard PID Control Tool V5.2 v5.2 955 A1730151 SIFLA173010501 Modular PID Control 5.1 v5.1 SIFLA1PIDT0601 SIFLA1PIDT0700 PID Professional v11 1539 A1PPRC11 SIFLA1PPRC1100 PID Professional combo V11.0 v11.0 1540 A1PPRO11 SIFLA1PPRO1100 PID Professional V11.0 v11.0 1541 A1730111 SIFLA173011100 Modular PID Control V11.0 v11.0 1542 A1STDC11 SIFLA1STDC1100 Standard PID Control V11.0 v11.0 PID Professional combo V11.0 include: PID Professional, Modular PID Control, Standard PID Control © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 9.20 271 PCS7 Brief Overview of PCS 7 Description PCS 7 is a process control system with many automatic functions to assist you during configuration. It enables you to create a project fast and conveniently. You will get to know some of these automatic functions in this Getting Started. At the same time, PCS 7 provides the advanced user many options for creating individual, projectspecific solutions customized to the requirements at hand. These individual solutions are, of course, not part of this Getting Started – you can find additional about these in the configuration manuals once you are familiar with the basic functionality SIMATIC PCS 7 is the future-proof process control system used in the "Totally Integrated Automation" concept by Siemens. Based on robust, industrial standard SIMATIC hardware and software components Modern, decentralized client/server architecture Simple and quick system expansion and optimization in-process Scalable from a small laboratory system to networks of plants with 60,000 measuring points For all applications: Continuous and batch applications For all industries: process, production and hybrid sectors Efficient, plant-wide engineering Flexible and simple integration of PROFIBUS-based field devices and drives Homogeneously integrated safety technology, certified by the TЬV (English Technical Inspectorate) Openness at all levels Increased availability through redundancy at all levels © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 272 EKB Installer Modular structured and scalable batch system, SIMATIC BATCH Flexible route control system, SIMATIC Route Control 21 CFR part 11 compliance PCS7 v7.0 include: 06_ALM__V3.0+HF1\ 08_DotNetFramework__V1.1\ 09_STEP7__V5.4+SP1+HF2\ 10_CFC__V7.0 + HF1 11_SCL__V5.3+SP2\ 12_SFC__V7.0\ 13a_TH__V7.0\ 13b_IEAPO__V7.0\ 14_LIB__V7.0\ 15_VXM__V7.0\ 16_VT__V7.0\ 17_PID_Tuner__V7.0\ 18_DOCPRO__V5.1+SP2+HF1\ 19_PLCSIM__V5.3+SP1+HF1\ 20_WinCC__V6.2 + HF2 22_WebNavigator__V6.2\ 25_StoragePlus__V1.2 + HF2 27_OPCCORECOMP\ 28_OpenPCS7__V7.0 + HF1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 31_SFV__V7.0\ 32_AS_OS__V7.0\ 33_PVI__V7.0\ 36_PCS7_Faceplates__V7.0\ 37_SIMNET_PCSW__V6.4+HF1\ 60_SB__V7.0\ 61_SBBLOCKS__V7.0\ 70_SL__V1.3+SP1\ 77_PDM__V6.0+SP2+HF1\ 85_RouteControl__V7.0\ 90_System_Docu__V7.0\ 92_PCS7Tools__V7.0\ BATCH_Report__V7.0\ DCF77Client\ DiagMonitor__V3.0\ PCS7_Driver_Blocks__V5.2+HF4\ PCS7_Library__V5.2+HF6\ PCS7_Library__V6.0+SP1+HF8\ PCS7_Library__V6.1+SP1+HF4\ SimaticRights\ WinAC_SLOT__V4.0\ WinCC_Fileserver__V6.2\ © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 273 274 EKB Installer 9.20.1 PCS7 v8.0... v9.0 See PCS 7 V8.0 licensing model SIMATIC PCS7 V8.0 OS Software Server Redundancy (PO 100) Order No.: 6ES7652-3BA08-2YA0 SISLP7OSRE0800.ekb + SISCY9WTGX99997.ekb + SISCYP7ORT99991.ekb © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 275 SIMATIC PCS7 V8.0 Central Archive Server BasicPackage (1500 Var) Order No.: 6ES7658-2FA08-2YB0 SISLP7CAS_0800.ekb + SISCY9WTGX99991.ekb Use optimal keyset © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 276 EKB Installer Select> Short name Long name License name Version 1406 A1LOGS15 SIFLA1LOGS0105 Logon - Logon Service 1.5 v1.5 1407 A1CFCM80 SIFLA1CFCM0800 CFC V8.0 Simotion v8.0 1408 A1CFCN80 SIFLA1CFCN0800 CFC V8.0 Sinamics v8.0 1409 A1CFCS80 SIFLA1CFCS0800 CFC V8.0 STEP 7 Option v8.0 1410 A1CFCU80 SIFLA1CFCU0800 CFC Unlimited Tags v8.0 1424 A1SFCV80 SIFLA1SFCV0800 SFC-Visualization V8.0 v8.0 1425 A1SFC_80 SIFLA1SFC_0800 SFC V8.0 v8.0 1426 A1SFCT80 SIFLA1SFCT0800 SFC for TDC v8.0 1427 A1VCCH80 SIFLA1VCCH0800 Version Cross Checker V8.0 v8.0 1428 A1VERT80 SIFLA1VERT0800 Version Trail v8.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 1429 A1IEA_80 SIFLA1IEA_0800 IEA PCS 7 V8.0 v8.0 1430 A1STOV13 SIFLA1STOV0103 StoragePlus-Viewer v1.3 1431 A1STOP13 SIFLA1STOP0103 StoragePlus v1.3 1432 YA1BUN99 SIFCYA1BUN99990 BATCH 10 UNITs v99.9 1433 YA1BUN99 SIFCYA1BUN99991 BATCH 20 UNITs v99.9 1434 YA1BUN99 SIFCYA1BUN99994 BATCH 40 UNITs v99.9 1435 YA1BUN99 SIFCYA1BUN99996 BATCH 100 UNITs v99.9 1436 YA1BUN99 SIFCYA1BUN99998 BATCH 1000 UNITs v99.9 1437 YP7PHA99 SIFCYP7PHA99991 Process Historian Archive (1500) v99.9 1438 YP7PHA99 SIFCYP7PHA99992 Process Historian Archive (5000) v99.9 1439 YP7PHA99 SIFCYP7PHA99993 Process Historian Archive (10000) v99.9 1440 YP7PHA99 SIFCYP7PHA99994 Process Historian Archive (30000) v99.9 1441 YP7PHA99 SIFCYP7PHA99995 Process Historian Archive (80000) v99.9 1442 YP7PHA99 SIFCYP7PHA99996 Process Historian Archive (120000) v99.9 1443 YA7RCR99 SIFCYA7RCR99991 Route Control Routes (10) v99.9 1444 YA7RCR99 SIFCYA7RCR99992 Route Control Routes (50) v99.9 1445 YP7ORT99 SIFCYP7ORT99991 OS RT PO (100) v99.9 1446 YP7ORT99 SIFCYP7ORT99992 OS RT PO (1000) v99.9 1447 YP7ORT99 SIFCYP7ORT99993 OS RT PO (5000) v99.9 1448 YP7ORT99 SIFCYP7ORT99994 OS RT PO (2000) v99.9 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 277 278 EKB Installer 1449 A3SPFF80 SIFLA3SPFF0800 PDM Foundation Fieldbus v8.0 1450 A3SPHX80 SIFLA3SPHX0800 PDM HART Mux v8.0 1451 MAINES80 SIFLMAINES0800 Maintenance ES v8.0 1452 P7OPEN80 SIFLP7OPEN0800 OpenPCS 7 Station v8.0 1453 P7OPOS80 SIFLP7OPOS0800 OpenPCS 7 Station / OS v8.0 1454 A1THPO80 SIFLA1THPO0800 TH v8.0 1455 P7ASES80 SIFLP7ASES0800 AS Engineering v8.0 1456 P7BCE_80 SIFLP7BCE_0800 BCE v8.0 1457 UA7RCR99 SIFLUA7RCR9999 Route Control Routes(unlimited) v99.9 1458 UP7ICA99 SIFLUP7ICA9999 Information Server - Client Access v99.9 (unlimited) 1459 UP7ORT99 SIFLUP7ORT9999 OS RT PO(unlimited) v99.9 1460 UP7PHA99 SIFLUP7PHA9999 Process Historian Archive (unlimited) v99.9 1461 UP7WEB99 SIFLUP7WEB9999 OS Web Server(unlimited) v99.9 1462 P7IE__80 SIFLP7IE__0800 IE v8.0 1463 P7CAS_80 SIFLP7CAS_0800 OS Central Archive Server v8.0 1464 P7DAMO80 SIFLP7DAMO0800 OS DataMonitor v8.0 1465 P7REDU80 SIFLP7REDU0800 OS Redundancy v8.0 1466 P7SERB80 SIFLP7SERB0800 OS Server Basic v8.0 1467 P7SISB80 SIFLP7SISB0800 OS Single Station Basic v8.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 1468 P7STPL80 SIFLP7STPL0800 OS StoragePlus v8.0 1469 P7CLIE80 SIFLP7CLIE0800 OS Client v8.0 1470 P7OSEB80 SIFLP7OSEB0800 OS Engineering Basic v8.0 1471 P7OSES80 SIFLP7OSES0800 OS Engineering v8.0 1472 P7OSSV80 SIFLP7OSSV0800 OS Server v8.0 1473 P7OSRE80 SIFLP7OSRE0800 OS Server Redundancy v8.0 1474 P7OSSR80 SIFLP7OSSR0800 OS Single Station Redundancy v8.0 1475 P7OSSP80 SIFLP7OSSP0800 OS StoragePlus v8.0 1476 P7WDIC80 SIFLP7WDIC0800 WebDiagnose Client v8.0 1477 P7WDIS80 SIFLP7WDIS0800 WebDiagnose Server v8.0 1478 P7WEBS80 SIFLP7WEBS0800 OS Web Server Basic v8.0 1479 P7PRMS80 SIFLP7PRMS0800 Promoter Package System v8.0 1480 A1BAPI80 SIFLA1BAPI0800 BATCH API v8.0 1481 A1BCLI80 SIFLA1BCLI0800 BATCH Client v8.0 1482 A1BREC80 SIFLA1BREC0800 BATCH Recipe System v8.0 1483 A1BSER80 SIFLA1BSER0800 BATCH Server v8.0 1484 A1VXME80 SIFLA1VXME0800 Version Cross Manager v8.0 1485 A3EXTE80 SIFLA3EXTE0800 PDM Extended v8.0 1486 A3SPBI80 SIFLA3SPBI0800 PDM Integration in STEP 7 v8.0 1487 A3SPBS80 SIFLA3SPBS0800 PDM Basic v8.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 279 280 EKB Installer 1488 A3SPIE80 SIFLA3SPIE0800 PDM Routing v8.0 1489 A7RCCX80 SIFLA7RCCX0800 Route Control Center v8.0 1490 A7RCEN80 SIFLA7RCEN0800 Route Control Engineering v8.0 1491 A7RCS180 SIFLA7RCS10800 Route Control Server v8.0 1492 ADVES180 SIFLADVES10800 AdvancedES v8.0 1493 MANCON10 SIFLMANCON0100 Management Console v1.0 1494 P7PRMU80 SIFLP7PRMU0800 Promoter Package User v8.0 1495 P7RTX199 SIFLP7RTX19999 RTX v99.9 1496 SP7ISV80 SIFLSP7ISV0800 Information Server v8.0 1497 SP7PHB80 SIFLSP7PHB0800 Process Historian Archive - Batch v8.0 1498 SP7PHR80 SIFLSP7PHR0800 Process Historian Redundancy v8.0 1499 SP7PHS80 SIFLSP7PHS0800 Process Historian Server v8.0 1500 PCS7TT80 SIFLPCS7TT0800 PCS 7 Trial v8.0 1501 PCS7T280 SIFLPCS7T20800 PCS 7 Trial v8.0 1502 A1BSSS80 SIFLA1BSSS0800 BATCH Single Station System v8.0 1503 A1BSSU80 SIFLA1BSSU0800 BATCH Single Station User v8.0 1269 ZASRPX99 SIFPZASRPX9999A PCS7 AS RT PO 10000 v99.9 1270 ZASRPX99 SIFPZASRPX99999 PCS7 AS RT PO 8500 v99.9 1271 ZASRPX99 SIFPZASRPX99998 PCS7 AS RT PO 5000 v99.9 1272 ZASRPX99 SIFPZASRPX99997 PCS7 AS RT PO 3000 v99.9 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 1273 ZASRPX99 SIFPZASRPX99996 PCS7 AS RT PO 2000 v99.9 1274 ZASRPX99 SIFPZASRPX99995 PCS7 AS RT PO 1000 v99.9 1275 ZASRPX99 SIFPZASRPX99994 PCS7 AS RT PO 750 v99.9 1276 ZASRPX99 SIFPZASRPX99993 PCS7 AS RT PO 500 v99.9 1277 ZASRPX99 SIFPZASRPX99992 PCS7 AS RT PO 250 v99.9 1278 ZASRPX99 SIFPZASRPX99991 PCS7 AS RT PO 100 v99.9 984 A9WSRD70 SIFLA9WSRD0700 WINCC Redundancy v7.0 1052 A9WLB170 SIFLA9WLB10700 WINCC-V7 Load Balancing v7.0 1053 A9LB1070 SIFLA9LB100700 WINCC-V7 Load Balancing Step Up v7.0 985 A9WDS170 SIFLA9WDS10700 WINCC WebDiag Server v7.0 990 A9WSN370 SIFLA9WSN30700 WINCC-V7 WebNavigator 25 Clients v7.0 1009 A9WVC670 SIFLA9WVC60700 WINCC-V7 WinCC Dat@M.150 Clients v7.0 977 A9WARC70 SIFLA9WARC0700 WINCC User Archives v7.0 811 Y9WTG762 SIFCY9WTGX06027 WINCC-V6 Arch 120000 ATg v6.2 994 A9WRT770 SIFLA9WRT70700 WINCC-V7 RT 256K PTg 512 ATg v7.0 1002 A9WRC770 SIFLA9WRC70700 WINCC-V7 RC 256K PTg 512 ATg v7.0 1019 A9WSEC70 SIFLA9WSEC0700 WINCC Server v7.0 1020 A9WOP170 SIFLA9WOP10700 WINCC-V7 Connectivity Pack v7.0 981 Y9WTG370 SIFCY9WTGX99993 WINCC-V7 Arch 30000 ATg © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 v99.9 281 282 EKB Installer 982 Y9WTG270 SIFCY9WTGX99992 WINCC-V7 Arch 5000 ATg v99.9 983 Y9WTGX99 SIFCY9WTGX99991 WINCC-V7 Arch 1500 ATg v99.9 9.20.2 PCS7 v7.1 See PCS 7 V7.0 licensing model © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 283 9.20.3 PCS7 v7.0 576. 577. 578. 579. 580. 581. 582. 583. 584. 585. 586. 587. 588. 589. 590. 591. 592. 593. 594. 595. 596. 597. 598. 599. 600. 601. 602. 603. 604. 605. 606. 607. 608. 609. 610. 611. 612. 613. 614. PCS7TT70 P7WSV470 P7WSV370 P7WSV270 P7WSV170 RTASS570 RTASS470 RTASS370 RTASS270 RTASS170 A1BSP970 A1BSP670 A1BSP470 A1BSP270 A1BSP070 A1BROP70 A1BREC70 A1BPLA70 A1BFOR70 A1BBCC70 A1BAPS70 A1BAPI70 A1BHIE70 A1CFCS70 A1CFCU70 A1CFCD70 A1CFC970 A1CFC770 A1CFC570 A1CFC370 A1CFC170 A1VCCH70 A1VERT70 A1IEA_70 A7RCS370 A7RCS270 A7RCS170 A7RCEN70 A7RCCX70 SIFLPCS7TT0700 SIFLP7WSV40700 SIFLP7WSV30700 SIFLP7WSV20700 SIFLP7WSV10700 SIFLRTASSA0700 SIFLRTASS40700 SIFLRTASS30700 SIFLRTASS20700 SIFLRTASS10700 SIFLA1BSP90700 SIFLA1BSP60700 SIFLA1BSP40700 SIFLA1BSP20700 SIFLA1BSP00700 SIFLA1BROP0700 SIFLA1BREC0700 SIFLA1BPLA0700 SIFLA1BFOR0700 SIFLA1BBCC0700 SIFLA1BAPS0700 SIFLA1BAPI0700 SIFLA1BHIE0700 SIFLA1CFCS0700 SIFLA1CFCU0700 SIFLA1CFCD0700 SIFLA1CFC90700 SIFLA1CFC70700 SIFLA1CFC50700 SIFLA1CFC30700 SIFLA1CFC10700 SIFLA1VCCH0700 SIFLA1VERT0700 SIFLA1IEA_0700 SIFLA7RCS30700 SIFLA7RCS20700 SIFLA7RCS10700 SIFLA7RCEN0700 SIFLA7RCCX0700 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 PCS7 6.1 SP1 RC 150K PTg 512 ATg PCS 7 - Web Server 50 clients PCS 7 - Web Server 25 clients PCS 7 - Web Server 10 clients PCS 7 - Web Server 3 clients Asset RT unlimited Asset RT 2048 Tags Asset RT 1024 Tags Asset RT 512 Tags Asset RT (128) BATCH Server9 unlim V7.0 BATCH Server2 1800 Obj V7.0 BATCH Server1 600 Obj V7.0 BF Server0 300 Obj V7.0 BF Server0 150 Obj V7.0 BF ROP Lib V7.0 BF Recipe System V7.0 BF Batch Planning V7.0 BF Formulas V7.0 BF BatchCC V7.0 BF API (Server) V7.0 BF API V7.0 BF Multi level Recipe V7.0 CFC V7.0 STEP 7 - Option CFC Unlimited Tags CFC V7.0 (5000) CFC V7.0 (3000) CFC V7.0 (2000) CFC V7.0 (1000) CFC V7.0 (500) CFC V7.0 (250) Version Cross Checker V7.0 Version Trail IEA PCS 7 7.0 Route Control Server 300 simultaneous Route Control Server (100) Route Control Server 30 simultaneous Route Control Engineering Route Control Center SIMATIC PCS7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC STEP 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC STEP 7 SIMATIC STEP 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 284 EKB Installer 615. 616. 617. 618. 619. 620. 621. 622. 623. 624. 625. 626. 627. 628. 629. 630. 631. 632. 633. 634. 635. 636. 637. 638. 639. 640. 641. 642. 643. 644. 645. 646. 647. 648. 649. 650. 651. 652. 653. 654. 655. 656. 657. 658. 659. 660. 661. 662. 663. 664. 665. 666. 667. 864 A1SFCV70 A1SFC_70 A1SFCT70 A1ESAS70 A1SAFV70 A1SAFM70 A1SAFE70 A9WARC62 A9WTG662 A9WTG562 A9WTG462 A9WTG362 A9WTG262 A9WTG162 A9WSRD62 A9WDS162 A9WDC162 A9WSN662 A9WSN562 A9WSN462 A9WSN362 A9WSN262 A9WSN162 A9WRT862 A9WRT762 A9WRT662 A9WRT562 A9WRT462 A9WRT362 A9WRT262 A9WRT162 A9WRC862 A9WRC762 A9WRC662 A9WRC562 A9WRC462 A9WRC362 A9WRC262 A9WRC162 A9WVC662 A9WVC562 A9WVC462 A9WVC362 A9WVC262 A9WVC162 A9WSPA62 A9WSP362 A9WSP262 A9WSP162 A9WSEC62 A9WOP162 A1ADMT14 A1LOGS14 SIFLA1SFCV0700 SIFLA1SFC_0700 SIFLA1SFCT0700 SIFLA1ESAS0700 SIFLA1SAFV0700 SIFLA1SAFM0700 SIFLA1SAFE0700 SIFLA9WARC0602 SIFLA9WTG70602 SIFLA9WTG50602 SIFLA9WTG40602 SIFLA9WTG30602 SIFLA9WTG20602 SIFLA9WTG10602 SIFLA9WSRD0602 SIFLA9WDS10602 SIFLA9WDC10602 SIFLA9WSN60602 SIFLA9WSN50602 SIFLA9WSN40602 SIFLA9WSN30602 SIFLA9WSN20602 SIFLA9WSN10602 SIFLA9WRT80602 SIFLA9WRT70602 SIFLA9WRT60602 SIFLA9WRT50602 SIFLA9WRT40602 SIFLA9WRT30602 SIFLA9WRT20602 SIFLA9WRT10602 SIFLA9WRC80602 SIFLA9WRC70602 SIFLA9WRC60602 SIFLA9WRC50602 SIFLA9WRC40602 SIFLA9WRC30602 SIFLA9WRC20602 SIFLA9WRC10602 SIFLA9WVC60602 SIFLA9WVC50602 SIFLA9WVC40602 SIFLA9WVC30602 SIFLA9WVC20602 SIFLA9WVC10602 SIFLA9WSPA0602 SIFLA9WSP30602 SIFLA9WSP20602 SIFLA9WSP10602 SIFLA9WSEC0602 SIFLA9WOP10602 SIFLA1ADMT0104 SIFLA1LOGS0104 SFC-Visualization V7.0 SFC V7.0 SFC for D7-SYS Asset ES Safety Matrix Viewer V7.0 Safety Matrix Tool V7.0 Safety Matrix Editor V7.0 WINCC User Archives WINCC-V6 Arch 120000 ATg WINCC-V6 Arch 80000 ATg WINCC-V6 Arch 4G ATg UNLIM WINCC-V6 Arch 30000 ATg WINCC-V6 Arch 5000 ATg WINCC-V6 Arch 1500 ATg WINCC Redundancy WINCC WebDiag Server WINCC WebDiag Client WINCC-V6.2 WebNavigator 150 Clients WINCC-V6.2 WebNavigator 100 Clients WINCC-V6.2 WebNavigator 50 Clients WINCC-V6.2 WebNavigator 25 Clients WINCC-V6.2 WebNavigator 10 Clients WINCC-V6.2 WebNavigator 3 Clients WINCC-V6 RT 150K PTg 512 ATg WINCC-V6 RT 256K PTg 512 ATg WINCC-V6 RT 100K PTg 512 ATg WINCC-V6 RT 8000 PTg 512 ATg WINCC-V6 RT 64K PTg 512 ATg WINCC-V6 RT 1024 PTg 512 ATg WINCC-V6 RT 256 PTg 512 ATg WINCC-V6 RT 128 PTg 512 ATg WINCC-V6 RC 150K PTg 512 ATg WINCC-V6 RC 256K PTg 512 ATg WINCC-V6 RC 100K PTg 512 ATg WINCC-V6 RC 8000 PTg 512 ATg WINCC-V6 RC 64K PTg 512 ATg WINCC-V6 RC 1024 PTg 512 ATg WINCC-V6 RC 256 PTg 512 ATg WINCC-V6 RC 128 PTg 512 ATg WINCC-V6 WinCC Dat@M.150 Clients WINCC-V6 WinCC Dat@M.100 Clients WINCC-V6 WinCC Dat@M.50 Clients WINCC-V6 WinCC Dat@M.25 Clients WINCC-V6 WinCC Dat@M.10 Clients WINCC-V6 WinCC Dat@M.3 Clients WINCC ProAgent WinCC WINCC ProAgent 16 Clients WINCC ProAgent 8 Clients WINCC ProAgent 4 Clients WINCC Server WINCC-V6 Connectivity Pack Logon - Admin Tool 1.4 Logon - Logon Service 1.4 A9WCP96 SIFLA9WCP9060 WinCC ES PO (unlimited) SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC STEP 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC PCS 7 SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC PCS 7 SIMATIC PCS 7 v6.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 285 2 2 865 A9WRP36 2 SIFLA9WRP3060 2 WinCC RT PO (2000) v6.2 866 A9WRP96 2 SIFLA9WRP9060 2 WinCC RT PO (unlimited) v6.2 9.20.3.1 PCS 7 V7.0 licensing model SIMATIC PCS 7 V7.0 licensing model With the introduction of SIMATIC PCS 7 V7.0, the licensing of ES, OS and AS has also been changed. The aim of the new licensing for ES, OS and AS is: Simplification and price reduction for the engineering, and Harmonization of the invoicing unit The invoicing unit now used for OS (previously variables) and AS (previously unit paper license) will be the process object (PO), as already used with ES, i.e. all blocks for operator input and control. The prices will in future mainly be based on the process objects of the AS and OS runtime systems. In principle, there are no more quantity restrictions with pure engineering. OS licensing changes Instead of variables, process objects will now be counted and invoiced with the OS. In addition, the sum of variables used by the POs will be checked, whereby on the average up to 50 variables are permitted per PO. All variables not associated with blocks for operator input and control, e.g. manual variables or external variables created by the system, will be converted to process objects with a divisor of 25 variables/PO. AS licensing changes A volume-dependent AS runtime license has been newly introduced. As is the case with the OS, each block for operator input and control (process object) running on an AS will be counted and invoiced. One PO will be counted for one SFC. In view of the fact that the AS at present cannot store and check any licenses, license administration will be done by the ES, which will calculate the no. of process objects used upon downloading. The AS runtime license is designed as “Count Relevant License“, i.e. it can be expanded as required with staged licenses for 100, 1 000 or 10 000 POs. Additional process objects are simply added to existing ones. SIFCYMAINR07004.EKB Maintenance RT Count Relevant : 100 In order to ensure a smooth introduction of the new AS runtime licenses, license checks on the system side will be discontinued for a limited transition period. In preparation for the activation of © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 286 EKB Installer license checks we recommend that you keep licenses with a sufficient no. of process objects on the engineering station, which is normally used for loading of the automation systems. Existing AS runtime license documents (e.g. "SIMATIC PCS 7, SOFTWARE RUNTIME LICENSE LIBRARY BLOCKS") can be converted to new AS runtime licenses (100 POs) within one year. Detailed information on this topic will be published soon. ES licensing changes Depending on its application, an engineering station is either configurable as combined ES/OS station for small applications, or as classical engineering station not suitable as operator system for productive operation. Classical engineering station with an unlimited no. of process objects (PO unlimited) in three versions: AS/OS: for AS and OS Engineering OS: only for OS Engineering AS: only for AS Engineering With the OS and AS/OS versions the OS configuration can be checked in an OS test mode limited to 2 hours. This OS test mode is not suitable for productive operation. When the two hours have elapsed, the ES will automatically switch to demo mode. The AS/OS versions is particularly attractive, due to the inclusion of an AS runtime license for 600 POs. Note: If the ES is also used for WinCC projects (SCADA engineering), variables will be counted as before. For such projects the ES must be additionally licensed with variables. These are subject to volume restrictions, as before. Combined ES/OS station for small applications In order to support compact process control systems, we are offering three additional ES/OS combinations with 250, 1 000 and 2 000 POs with volume restrictions. These "All-in-one Licenses" contain runtime licenses for AS and OS in suitable volume, in addition to the engineering licenses. PowerPacks from 250 to 1 000 POs, from 1 000 to 2 000 POs and from 2 000 POs to PO unlimited enable further volume expansion. ------------------------------------------------------- © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 287 288 EKB Installer 9.20.3.1.1 KeySet pcs7 v7.0 ES pcs7 v7.0 ES 6ES7 658-2DF07-0YA5 PCS 7 Engineering V7.0 без возможности работы в OS Runtime SISLA1WPC20602.EKB SIFLA9WCP90602.EKB SISLA9WSEC0602.EKB SISLA9WSRD0602.EKB WinCC Advanced Process Ctrl WinCC ES PO (unlimited) WinCC Server WinCC Redundancy ES licensing changes Depending on its application, an engineering station is either configurable as combined ES/OS station for small applications, or as classical engineering station not suitable as operator system for productive operation. • Classical engineering station with an unlimited no. of process objects (PO unlimited) in three versions: – AS/OS: for AS and OS Engineering – OS: only for OS Engineering – AS: only for AS Engineering With the OS and AS/OS versions the OS configuration can be checked in an OS test mode limited to 2 hours. This OS test mode is not suitable for productive operation. When the two hours have elapsed, the ES will automatically switch to demo mode. The AS/OS versions is particularly attractive, due to the inclusion of an AS runtime license for 600 POs. Note: If the ES is also used for WinCC projects (SCADA engineering), variables will be counted as before. For such projects the ES must be additionally licensed with variables. These are subject to volume restrictions, as before. • Combined ES/OS station for small applications In order to support compact process control systems, we are offering three additional ES/OS combinations with 250, 1 000 and 2 000 POs with volume restrictions. These "All-in-one Licenses" contain runtime licenses for AS and OS in suitable volume, in addition to the engineering licenses. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 289 PowerPacks from 250 to 1 000 POs, from 1 000 to 2 000 POs and from 2 000 POs to PO unlimited enable further volume expansion. 9.20.3.1.2 KeySet pcs7 v7.0 Asset ES pcs7 v7.0 Asset ES 6ES7 658-7GX07-0YB5 pcs7 v7.0 Asset ES SIFLMAINES0700.EKB Maintenance ES 9.20.3.1.3 KeySet pcs7 v7.0 Client pcs7 v7.0 Client 6ES7 658-2CX07-0YA5 pcs7 v7.0 Client SISLA1WPC20602.EKB SIFLA9WRP00602.EKB WinCC Advanced Process Ctrl WinCC RT PO Client 9.20.3.1.4 KeySet pcs7 v7.0 Asset RT 100 PO pcs7 v7.0 Asset RT 100 PO 6ES7 658-7GB07-2YB0 PCS7 Asset Tags Runtime SIFCYMAINR07004.EKB Maintenance RT Count Relevant : 100 9.20.3.1.5 KeySet pcs7 v7.0 SER RED PO2000 pcs7 v7.0 SER RED PO2000 6ES7652-3BC07-2YA0 PCS 7 OS Software Redundant Server Pack V7.0 SISLA1WPC20602.EKB SISLA9WRP30602.EKB SISLA9WSEC0602.EKB SISLA9WSRD0602.EKB WinCC Advanced Process Ctrl WinCC RT PO (2000) WinCC Server WinCC Redundancy 9.20.3.2 Configurable size of a PCS 7 Selecting the Correct License Keys/Authorizations The configurable size of a PCS 7 system can be scaled using the number of process objects (PO). A process object (PO) is a process tag that is mapped onto a CFC chart. A process object is therefore a functional unit of a process-oriented system. • The software product licenses for engineering stations, operator stations and BATCH stations are therefore offered for a varying number of configurable process objects (PO). You can increase this number at any time with additional power packs. • The licenses for a Route Control station are based on the number of activated routes (material transport) in process mode. • The licenses for SIMATIC PDM are offered for a various number of configurable devices. Note © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 290 EKB Installer Hereinafter, we use the term license key even for products that still use the older authorizations. Component of Process Control System Engineering system (ES) Engineering Engineering system (ES) Downloading to SIMATIC stations Licens e increm ents Max. PO: 250 1000 2000 Remarks Limits the sum of all process objects on the ES Unlimite d Up to PO (tags): 100 250 600 750 1000 2000 3000 5000 8500 10000 Operator station (OS) Max. PO: 250 1000 2000 3000 5000 8500 OS client 128 The license type of these license keys is "Count relevant license". Limits the sum of process objects of all AS license keys on the ES SIFCYASPR X07001 SIFCYASPR X07002 SIFCYASPR X07003 SIFCYASPR X07004 SIFCYASPR X07005 SIFCYASPR X07006 SIFCYASPR X07007 SIFCYASPR X07008 SIFCYASPR X07009 SIFCYASPR X0700A Limited to 5,000 PO per single station system Limited to 8,500 PO per OS server Maximum of 12 servers each with max. 5,000 PO = 60,000 PO WinCC RT (128) © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list Central archive server 128 Archiving Number (OS server and central of archive server) archive tags: • < 512 Maintenance station (MS) PCS 7 OS Web Option 291 WinCC RT (128) • You can archive a maximum of 1,000 archive tags per second with an OS server. • You can archive a maximum of 12,000 archive tags per second with a central archive server. The license for < 512 archive tags is included in all OS server licenses. If you want to archive more archive tags, all additional licenses up to the desired capacity are required. 512 < SIFCY9WTG 1500 X06021 1500 < SIFCY9WTG 5000 X06022 5000 < SIFCY9WTG 10000 X06023 10000 < SIFCY9WTG 30000 X06024 30000 < SIFCY9WTG 80000 X06025 80000 < SIFCY9WTG 120000 X06026 Max. Number of monitored hardware components asset within a PCS 7 project tags The license type of these license keys is (hardwa "Count relevant license". re compon ents): 10 SIFCYMAINR 07001 100 SIFCYMAINR 07004 200 SIFCYMAINR 07005 1000 SIFCYMAINR 07007 Up to Number of Web clients on the OS Web server Web clients 3 10 25 50 Up to Web diagnost ic © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 292 EKB Installer BATCH station (batch processes) clients 3 Max. units: 10 20 40 100 Unlimite d Route Control station Max. (route control) routes 30 31 to 100 101 to 300 PDM Max. devices: 4 128 512 1024 2048 SIMATIC PCS 7 Box PCs Engineering SIMATIC PCS 7 Box PCs Operator station SIMATIC PCS 7 Box PCs Downloading to SIMATIC stations SIMATIC PCS 7 Box PCs PDM Unlimite d Max. PO: 250 1000 2000 Max. PO: 250 1000 2000 Up to PO (tags): 3x 100 Max. devices: 4 128 Number of units within a PCS 7 project The number of units that can be processed depends on the utilization of the BATCH server. Number of activated routes in process mode (material transports) The base of 30 active routes can be increased by upgrading to the next highest level. Number of configurable devices Limits the sum of all process objects on the ES You can find additional information in this table for the engineering system (ES) Limited to 2,000 PO per single station system The license type of these license keys is "Count relevant license". You can find additional information in this table for the engineering system (ES). Limited to 128 devices per SIMATIC PCS 7 BOX 416 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list SIMATIC PCS 7 Box PCs Maintenance station SIMATIC PCS 7 Box PCs BATCH Asset tags (hardwa re compon ents): 10 100 Max. units: 10 293 The license type of these license keys is "Count relevant license". You can find additional information in this table for the maintenance station (MS). Limited to 10 units per SIMATIC PCS 7 BOX 416 9.20.3.3 PCS7 Russian Наименование Заказной номер Цена,€ Базовое аппаратное обеспечение ES/OS PCS 7 ES/OS на базе IPC IL 43 с ВСЕ интерфейс* 6ES7 650-0LF07-0YX0 3 990 WinXP Prof. IE интерфейс** 6ES7 650-0LF07-0YX1 4 990 PCS 7 OS Client на базе промышленного компьютера IL 43 с WinXP Prof. 6ES7 650-0LG07-0YX0 2 870 PCS 7 OS Server на базе IPC IL ВСЕ интерфейс* 6ES7 650-0LH07-0YX0 4 990 43 с Win2003 Srv IE интерфейс** 6ES7 650-0LH07-0YX1 6 460 Multi VGA 2 экрана 6ES7 652-0XX03-1XE0 1273 4 экрана 6ES7 652-0XX03-1XE1 2 040 Внешняя световая и звуковая Сигнальный модуль 6DS1 916-8RR 916,3 сигнализация Кабель для сигнального модуля 6XV2 175-8AH30 151 Чип-карт доступ Chipcard Reader 6ES7 652-0XX01-1XC0 300 Чип-карты, упаковка из 10 штук 6ES7 652-0XX05-1XD1 320 PCS7 Box (BoxPC + WinAC Pro Complete System (PO 250) 6ES7 650-2MA07-0YX0 14 995 416 + PCS7 ES SW) RunTime System (PO 250) 6ES7 650-2MB07-0YX0 9 995 Программное обеспечение ES PCS 7 Engineering V7.0 без AS/OS: PO unlimited + 600 6ES7 658-5AF07-0YA5 11229 возможности работы в OS AS-RT PO 6ES7 658-1AF07-0YA5 3 003 Runtime AS: PO unlimited OS: PO unlimited 6ES7 658-2DF07-0YA5 10 115 PCS 7 Engineering V7.0 с AS/OS: 250 PO 6ES7 658-5AA07-0YA5 9 995 возможностью работы в OS AS/OS: 1000 PO 6ES7 658-5AB07-0YA5 13 629 Runtime AS/OS: 2000 PO 6ES7 658-5АC07-0YA5 19 629 PCS 7 Runtime License для AS 100 AS-RT PO 6ES7 653-2BA07-0XB0 600 (устанавливается на ES) 1 000 AS-RT PO 6ES7 653-2BB07-0XB0 6 000 10 000 AS-RT PO 6ES7 653-2BC07-0XB0 60 000 PCS 7 Version Cross Manager V7.0 6ES7 658-1CX07-2YA5 1796 PCS 7 Version Trail V7.0 6ES7 658-1FX07-2YA5 1024 PCS 7 Import Export Assistant V7.0 6ES7 658-1DX07-2YB5 2 099 Программное обеспечение OS PCS 7 OS Software Single Station PO250 6ES7 658-2AA07-0YA0 4 800 V7.0 PO 1000 6ES7 658-2AB07-0YA0 6 477 PO 2000 6ES7 658-2AC07-0YA0 7 918 PO 3000 6ES7 658-2AD07-0YA0 10 257 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 294 EKB Installer PCS 7 OS Software Server V7.0 PCS 7 OS Software Client V7.0 PCS 7 OS Software Redundant Server Pack V7.0 PCS 7 SFC Visualization V7.0 PCS7 Web Server V7.0 OpenPCS7 V7.0 PCS 7 OS Archive V7.0 (расширение стандартного архивного объема в 512 переменных) PO 5000 6ES7 658-2AE07-0YA0 13 932 PO250 PO 1000 PO 2000 PO 3000 PO 5000 PO 8500 6ES7 658-2BA07-0YA0 7 947 6ES7 658-2BB07-0YA0 9 459 6ES7 658-2BC07-0YA0 10 909 6ES7 658-2BD07-0YA0 13 407 6ES7 658-2BE07-0YA0 17 292 6ES7 658-2BF07-0YA0 24 023 6ES7 658-2CX07-0YA5 3 190 6ES7 652-3BA07-2YA0 17 999 6ES7 652-3BB07-2YA0 19 795 6ES7 652-3BC07-2YA0 21508 6ES7 652-3BD07-2YA0 24 212 6ES7 652-3BE07-2YA0 29 695 6ES7 652-3BF07-2YA0 39 819 6ES7 652-0XD07-2YB5 890 6ES7 658-2GA07-2YB0 8 012 6ES7 658-2GB0713 745 2YB0 23 888 6ES7 658-2GC0742 264 2YB0 6ES7 658-2GD07-2YB0 6ES7 658-0GX07-2YB0 900 6ES7 658-0HX07-2YB0 2 900 PO250 PO 1000 PO 2000 PO 3000 PO 5000 PO 8500 для 3 клиентов для 10 клиентов для 25 клиентов для 50 клиентов OpenPCS 7 Server/OS Client (PCS7 Client нужен) Stand-alone OpenPCS 7 Server 1 500 archive variables 5 000 archive variables 10 000 archive variables 30 000 archive variables 80 000 archive variables 120 000 archive variables Central Archive Server V7.0 (1 500 archive variables входит) StoragePlusV1.2 SIMATIC BATCH V7.0 Server Basic Package V7.0 Опции BATCH unit 10 unit 6ES7 658-2EA07-2YB0 2 290 6ES7 658-2EB07-2YB0 7 700 6ES7 658-2EC0712 000 2YB0 19 900 6ES7 658-2ED0748 000 2YB0 58 000 6ES7 658-2EE07-2YB0 6ES7 658-2EF07-2YB0 6ES7 658-2FA07-0YB0 7 471 6ES7 652-0XC21-2YB0 2 602 6ES7 657-0SA07-0YB0 6 873 20 unit 40 unit 100 unit unlimited unit Опции BatchCC V7.0 Recipe System V7.0 Batch Planning V7.0 Hierarchical Recipe V7.0 ROP Library V7.0 Separation Procedures/Formulas V7.0 API V7.0 PCS7 Asset Management V7.0 PCS7 Asset ES V7.0 PCS7 Asset Runtime Basic Package V7.0 (100 Asset Tags + SNMP OPC 6ES7 657-0XB07-2YB0 4 937 6ES7 657-0XC07-2YB0 9 061 6ES7 657-0XD07-2YB0 18 132 6ES7 657-0XE07-2YB0 30 149 6ES7 657-0LX07-2YB5 1946 6ES7 657-0AX07-2YB5 1946 6ES7 657-0BX07-2YB5 1 167 6ES7 657-0FX07-2YB0 3 052 6ES7 657-0GX07-2YB0 1874 6ES7 657-0HX07-2YB0 578 6ES7 657-0MX07-2YB0 1874 6ES7 658-7GX07-0YB5 1050 6ES7 658-7GB07-0YB0 3 150 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list Server) PCS7 Asset Tags Runtime 10 Asset Tags 100 Asset Tags 1000 Asset Tags SIMATIC Route Control V6.1 SIMATIC Route Control Engineering V7.0 SIMATIC Route Control Server V7.0 (до 30 путей) SIMATIC Route Control Center V7.0 Стандартные системы автоматизации AS 414-3, 2,8 МБ 100 AC (20A), UR1 AS-RT PO AC (10A), UR2 DC (20A), UR1 DC (10A), UR2 AS 414-3IE, 2,8 МБ 100 AC (10A), UR2 AS-RT PO DC (10A), UR2 AS 416-2, 5,6 МБ 100 AC (20A), UR1 AS-RT PO AC (10A), UR2 DC (20A), UR1 DC (10A), UR2 AS 416-3, 11,2 МБ 100 AC (20A), UR1 AS-RT PO AC (10A), UR2 DC (20A), UR1 DC (10A), UR2 AS416-3IE, 11,2 МБ 100 AC (10A), UR2 AS-RT PO DC (10A), UR2 AS 417-4, 4 МБ 100 AS- AC (20A), UR1 RT PO AC (10A), UR2 DC (20A), UR1 DC (10A), UR2 AS 417-4, 16 МБ 100 AC (20A), UR1 AS-RT PO AC (10A), UR2 DC (20A), UR1 DC (10A), UR2 Системы автоматизации повышенной надежности AS 414-4-1H, 1,4 МБ AC (10A), UR2, без синхр. модулей 100 AS-RT PO DC (10A), UR2, без синхр. модулей UR1, без БП, карты RAM, синхр. модулей AS 414-4-2H, 1,4 МБ AC (10A), UR2H 100 AS-RT PO DC (10A), UR2H AS417-4-1H,20МБ 100 AC (10A), UR2, 4 МБ RAM card, без синхр. AS-RT PO модулей DC (10A), UR2, 4 МБ RAM card, без синхр. модулей AC (10A), UR2, 16 МБ RAM card, без синхр. модулей DC (10A), UR2, 16 МБ RAM card, без синхр. модулей UR1, без БП, карты RAM, синхр. модулей AS 417-4-2H, 20 МБ 100 AC (10A), UR2H, 4 МБ RAM card AS-RT PO DC (10A), UR2H, 4 МБ RAM card AC (10A), UR2H, 8 МБ RAM card DC (10A), UR2H, 8 МБ RAM card AC (10A), UR2H, 16 МБ RAM card DC (10A), UR2H, 16 МБ RAM card © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 295 6ES7 658-7GA07-2YB0 42 6ES7 658-7GB07-2YB0 399 6ES7 658-7GC07-2YB0 3 790 6ES7 658-7DX07-0YB5 5 543 6ES7 658-7FA07-0YB0 1796 6ES7 658-7EX07-0YB5 1290 6ES7 654-3QD48-0XX0 8 480 6ES7 654-1QD58-0XX0 8 100 6ES7 654-6QD48-0XX0 8 510 6ES7 654-4QD58-0XX0 8 130 6ES7 654-1SD58-0XX0 7 230 6ES7 654-4SD58-0XX0 7 260 6ES7 654-3JE48-0XX0 10 765 6ES7 654-1JE58-0XX0 10 385 6ES7 654-6JE48-0XX0 10 795 6ES7 654-4JE58-0XX0 10 415 6ES7 654-3KF48-0XX0 13 895 6ES7 654-1KF58-0XX0 13 515 6ES7 654-6KF48-0XX0 13 925 6ES7 654-4KF58-0XX0 13 545 6ES7 654-1TE58-0XX0 11930 6ES7 654-4TE58-0XX0 11960 6ES7 654-3LE48-0XX0 15 035 6ES7 654-1LE58-0XX0 14 655 6ES7 654-6LE48-0XX0 15 070 6ES7 654-4LE58-0XX0 14 690 6ES7 654-3LG48-0XX0 16 670 6ES7 654-1LG58-0XX0 16 280 6ES7 654-6LG48-0XX0 16 690 6ES7 654-4LG58-0XX0 16 320 6ES7 654-2MD57-0XX0 8 701 6ES7 654-4MD57-0XX0 8 588 6ES7 654-0MX47-0XX0 7 691 6ES7 654-2ND67-0XC0 19 115 6ES7 654-4ND67-0XC0 18 901 6ES7 654-2RE57-0XX0 14 576 6ES7 654-4RE57-0XX0 14 474 6ES7 654-2RG57-0XX0 16 198 6ES7 654-4RG57-0XX0 16 096 6ES7 654-0RХ47-0XX0 13 148 6ES7 654-2PE67-0XC0 30 865 6ES7 654-4PE67-0XС0 30 651 6ES7 654-2PF67-0XС0 32 314 6ES7 654-4PF67-0XС0 32 099 6ES7 654-2PG67-0XС0 34 119 6ES7 654-4PG67-0XС0 33 905 296 EKB Installer 9.20.4 KeySet PCS7 v6.1 A1DOCP51.ekb A1FSYS05.ekb A1P7P350.ekb A1SAFE52.ekb A1SAFM52.ekb A1SAFV60.ekb SIFLA0SHLA0601.ekb SIFLA0SNEM0601.ekb SIFLA0SNMX0601.ekb SIFLA1ADMT0102.ekb SIFLA1BPLA0601.ekb SIFLA1BREC0601.ekb SIFLA1CFCU0601.ekb SIFLA1ESAS0601.ekb SIFLA1IEA_0601.ekb SIFLA1PIDT0601.ekb SIFLA1PLCS0503.ekb SIFLA1SCL_0503.ekb SIFLA1SFC_0601.ekb SIFLA1SFCV0601.ekb SIFLA1THPO0601.ekb SIFLA1VCCH0601.ekb SIFLA1VERT0601.ekb SIFLA3SPBI0600.ekb SIFLA3SPBS0600.ekb SIFLA3SPIE0600.ekb SIFLA3SPT10600.ekb SIFLA7RCCX0601.ekb SIFLA7RCEN0601.ekb SIFLA9WRC40600.ekb SIFLA171040503.ekb SISLA1BAPI0601.ekb SISLA1BBCC0601.ekb SISLA1BFOR0601.ekb SISLA1BHIE0601.ekb SISLA1BROP0601.ekb SISLA1BSP00601.ekb SISLA1ESIG0102.ekb SISLA1LOGS0102.ekb SISLA1STOP0101.ekb SISLA1STOV0101.ekb SISLA1WPC20600.ekb SISLA1WPC40600.ekb SISLA7RCS10601.ekb SISLA9WARC0600.ekb SISLA9WOP10601.ekb SISLA9WSEC0600.ekb SISLA9WSN10601.ekb SISLA9WSRD0600.ekb SISLCESVR20601.EKB SISLP7WSV10601.ekb © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 297 SISLRTASS10601.ekb 9.20.5 PCS7 v6.0 Enter topic text here. 9.20.6 PCS7 v5.0 Enter topic text here. 9.21 PLCSIM 420 A1PLCS01 S7-PLCSIM V1.x v1.x 419 A1PLCS03 S7-PLCSIM V3.x v3.x 418 A1PLCS04 S7-PLCSIM V4.x v4.x 417 A1PLCS05 S7-PLCSIM V5.x v5.x 416 A1PLCS51 S7-PLCSIM V5.2 v5.1 415 A1PLCS53 SIFLA1PLCS050 3 S7-PLCSIM V5.3 v5.3 414 A1PLCS54 SIFLA1PLCS050 4 S7-PLCSIM V5.4 v5.4 A1PLCS55 SIFLA1PLCS050 S7-PLCSIM V5.5 5 V5.5 or Step7 Professional keys STEP 7 V5.5 PROFESSIONAL STEP 7 V5.4 PROFESSIONAL STEP 7 V5.3 PROFESSIONAL 9.22 S7PROF55.EKB S7PROF54.EKB S7PROF53.EKB SIFLAS7PROF0505.EKB SIFLAS7PROF0504.EKB SIFLAS7PROF0503.EKB PowerControl Short name Long name License name Version 934 SRC00320 SIFLSRC0030200 powercontrol max. 3 Clients v2.0 935 SRC01020 SIFLSRC0100200 powercontrol max. 10 Clients v2.0 936 SRCG10020 SIFLSRCG100200 powercontrol > 10 Clients v2.0 937 SRMAAD20 SIFLSRMAAD0200 powercontrol Advanced Version v2.0 938 SRMALE20 SIFLSRMALE0200 powercontrol Lean Version v2.0 939 SRMAST20 SIFLSRMAST0200 powercontrol Standard Version v2.0 940 SRMATR20 SIFLSRMATR0200 powercontrol Trial Version 941 SRMAUN20 SIFLSRMAUN0200 powercontrol Unlimited Version v2.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 v2.0 298 EKB Installer 942 9.23 SIFLSPCOST0200 A9PROP50 A9PROM50 A9PRO450 A9PRO350 A9PRO250 A9PRO150 v2.0 ProAgent/PC ProAgent/MP ProTool/Pro RT 2048 Tags ProTool/Pro RT 512 Tags ProTool/Pro RT 256 Tags ProTool/Pro RT 128 Tags RF-Manager RF-Manager 945 SRFMES10 SIFLSRFMES0100 9.25 powercost ProTool 257. 258. 259. 260. 261. 262. 9.24 SPCOST20 RF-MANAGER 2007 v1.0 946 YRFMRT1 SIFCYRFMRT0100 RF-MANAGER 2007 Runtime (50) 0 5 v1.0 947 YRFMRT1 SIFCYRFMRT0100 RF-MANAGER 2007 Runtime (20) 0 3 v1.0 948 YRFMRT1 SIFCYRFMRT0100 RF-MANAGER 2007 Runtime (5) 0 1 v1.0 949 YRFMRT1 SIFCYRFMRT0100 RF-MANAGER 2007 Runtime (1) 0 0 v1.0 950 SRFMES11 SIFLSRFMES0101 v1.1 951 YRFMRT1 SIFCYRFMRT0101 RF-MANAGER 2008 Runtime (50) 1 5 v1.1 952 YRFMRT1 SIFCYRFMRT0101 RF-MANAGER 2008 Runtime (20) 1 3 v1.1 953 YRFMRT1 SIFCYRFMRT0101 RF-MANAGER 2008 Runtime (5) 1 1 v1.1 954 YRFMRT1 SIFCYRFMRT0101 RF-MANAGER 2008 Runtime (1) 1 0 v1.1 RF-MANAGER 2008 Safety Matrix Safety Matrix Viewer V6.1 Order No. 6ES7833-1SM610YA5 Designation SAFETY MATRIX VIEWER V6.1, FOR PCS7, FLOATING LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCUM. ON CD, CLASS A, 2 LAGUAGES (G,E) © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 299 SAFETY MATRIX VIEWER FOR PCS 7, UPGRADE V6.0 -> V6.1, FOR PCS7, UPGRADE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCUM. ON CD, CLASS A, 2 LAGUAGES (G,E) 6ES7833-1SM610YE5 Note: The new version 6.1 of the SIMATIC Safety Matrix Viewer replaces version 6.0 and is compatible with it. 9.26 9.27 SICAM PAS 46 ESVP0001 SICAM Valpro/Recpro V5.x v1.x 47 ESP53001 SICAM plusTOOLS for eRTU v1.x 48 ESNR0001 SICAM PAS CC Runtime V5.x v1.x 744 ESRC0001 SICAM PAS CC Config. V5.x v1.x 745 SDM53001 SICAM Diamond Base V2.x v1.x 746 SDM53002 SICAM Diamond for PAS V5.1 v2.x 747 SDM53003 SICAM Diamond for SLD V1.x v3.x Simatic IT for installation also required Business Objects license keys and Logon key N Short name Long name License name Version 14 IXLS0061 SIFLIXLS000601 IT Excel Add-in v6.1 15 ITFC0061 SIFLITFC000601 IT SAP Connector tRFC v6.1 16 ISVCP061 SIFLISVCP00601 IT Services for Production Suite v6.1 17 ISFC0061 SIFLISFC000601 IT SAP Connector sRFC v6.1 18 ISCM0061 SIFLISCM000601 IT Scanner Manager (100) v6.1 19 IRDS0061 SIFLIRDS000601 IT Real Time Data Server v6.1 20 IRDE0061 SIFLIRDE000601 IT Real Time Data Engine v6.1 21 IPRM0061 SIFLIPRM000601 IT Personnel Manager v6.1 22 IPPA0661 SIFLIPPA060601 IT Plant Performance Analyzer (30000) v6.1 23 IPOM0061 SIFLIPOM000601 IT Production Orders Manager v6.1 24 IPMT0061 SIFLIPMT000601 IT Production Modeler Engineering Client (4) v6.1 25 IPMS0861 SIFLIPMS080601 IT Production Modeler (800) v6.1 26 IPDA0661 SIFLIPDA060601 IT Plant Data Archive (10000) v6.1 27 IOEE0861 SIFLIOEE080601 IT OEE/DTM (800) v6.1 28 IODS0061 SIFLIODS000601 IT On Line Debugging Support v6.1 29 IMQS0061 SIFLIMQS000601 IT MQ Series Connector v6.1 30 IMMQ0061 SIFLIMMQ000601 IT Microsoft Message Queue Connector v6.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 300 EKB Installer 31 IMAM0061 SIFLIMAM000601 IT Material Manager v6.1 32 IHDD0061 SIFLIHDD000601 IT Historian Data Display v6.1 33 IGUR0061 SIFLIGUR000601 IT GUI Run-Time v6.1 34 IGUD0061 SIFLIGUD000601 IT GUI Development v6.1 35 IFNDP061 SIFLIFNDP00601 IT Backup Foundation for Production Suite v6.1 36 IDR30061 SIFLIDR3000601 IT Driver OPC Client v6.1 37 IDOC0061 SIFLIDOC000601 IT SAP Connector iDOC v6.1 38 IDIS0061 SIFLIDIS000601 IT Data Integration Service v6.1 39 IDFM0061 SIFLIDFM000601 IT Product Definition Manager v6.1 40 IDEM0061 SIFLIDEM000601 IT Real Time Data Engine Manager v6.1 41 ICSV0061 SIFLICSV000601 IT Compliance Services v6.1 42 ICLIP761 SIFLICLIP70601 IT Production Suite Client (25) v6.1 43 ICBE0061 SIFLICBE000601 IT CAB Engineering v6.1 44 IAMG0661 SIFLIAMG060601 IT Alarm Manager (30000) v6.1 45 IAMD0061 SIFLIAMD000601 IT Alarm Manager Display v6.1 860 ICFR0061 SIFLICFR000601 IT 21cfr11 v6.1 861 ICRE0461 SIFLICRE040601 IT 200000 Credits v6.1 862 IDR10061 SIFLIDR1000601 IT Driver 3964R v6.1 863 IDR20061 SIFLIDR2000601 IT Driver Modbus RTU v6.1 864 IHBU0061 SIFLIHBU000601 IT Hot Backup for Process Tags v6.1 865 IIMC0061 SIFLIIMC000601 IT IMC v6.1 866 IISCI761 SIFLIISCI70601 IT Interspec Client (25) v6.1 867 IISSI061 SIFLIISSI00601 IT Interspec Standard Server v6.1 868 IISSI361 SIFLIISSI30601 IT Interspec Advanced Server v6.1 869 IOEE0061 SIFLIOEE000601 IT OEE/DTM v6.1 870 IOEE8061 SIFLIOEE800601 IT OEE/DTM (800) v6.1 871 IPDE0061 SIFLIPDE000601 IT PDE v6.1 872 IRMSR061 SIFLIRMSR00601 IT Report Manager Server v6.1 873 ISQMS0061 SIFLISQMS00601 IT SAP QM Interface v6.1 874 ISVCH061 SIFLISVCH00601 IT Services for Historian Standard v6.1 875 IULCU761 SIFLIULCU70601 IT Unilab Client (25) v6.1 876 IULSU361 SIFLIULSU30601 IT Unilab Standard Server v6.1 877 IULSU661 SIFLIULSU60601 IT Unilab Advanced Server v6.1 878 IUPPU061 SIFLIUPPU00601 IT Unilab Pocket PC v6.1 879 IUUCU061 SIFLIUUCU00601 IT Unilab Uniconnect v6.1 880 IRMC0261 SIFLIRMC020601 IT Report Manager 25 concurrent client v6.1 881 ITFC0063 SIFLITFC000603 IT SAP Connector tRFC v6.3 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 301 882 ISVCP063 SIFLISVCP00603 IT Services for Production Suite v6.3 883 ISFC0063 SIFLISFC000603 IT SAP Connector sRFC v6.3 884 ISCM0063 SIFLISCM000603 IT Scanner Manager (100) v6.3 885 IRDS0063 SIFLIRDS000603 IT Real Time Data Server v6.3 886 IRDE0063 SIFLIRDE000603 IT Real Time Data Engine v6.3 887 IPRM0063 SIFLIPRM000603 IT Personnel Manager v6.3 888 IPPA0663 SIFLIPPA060603 IT Plant Performance Analyzer (30000) v6.3 889 IPOM0063 SIFLIPOM000603 IT Production Orders Manager v6.3 890 IPMT0063 SIFLIPMT000603 IT Production Modeler Engineering Client (4) v6.3 891 IPMS0863 SIFLIPMS080603 IT Production Modeler (800) v6.3 892 IPDA0663 SIFLIPDA060603 IT Plant Data Archive (10000) v6.3 893 IOEE0863 SIFLIOEE080603 IT OEE/DTM (800) v6.3 894 IODS0063 SIFLIODS000603 IT On Line Debugging Support v6.3 895 IMQS0063 SIFLIMQS000603 IT MQ Series Connector v6.3 896 IMMQ0063 SIFLIMMQ000603 IT Microsoft Message Queue Connector v6.3 897 IMAM0063 SIFLIMAM000603 IT Material Manager v6.3 898 IHDD0063 SIFLIHDD000603 IT Historian Data Display v6.3 899 IGUR0063 SIFLIGUR000603 IT GUI Run-Time v6.3 900 IGUD0063 SIFLIGUD000603 IT GUI Development v6.3 901 IFNDP063 SIFLIFNDP00603 IT Backup Foundation for Production Suite v6.3 902 IDR30063 SIFLIDR3000603 IT Driver OPC Client v6.3 903 IDOC0063 SIFLIDOC000603 IT SAP Connector iDOC v6.3 904 IDIS0063 SIFLIDIS000603 IT Data Integration Service v6.3 905 IDFM0063 SIFLIDFM000603 IT Product Definition Manager v6.3 906 IDEM0063 SIFLIDEM000603 IT Real Time Data Engine Manager v6.3 907 ICSV0063 SIFLICSV000603 IT Compliance Services v6.3 908 ICLIP763 SIFLICLIP70603 IT Production Suite Client (25) v6.3 909 ICBE0063 SIFLICBE000603 IT CAB Engineering v6.3 910 IAMG0663 SIFLIAMG060603 IT Alarm Manager (30000) v6.3 911 IAMD0063 SIFLIAMD000603 IT Alarm Manager Display v6.3 912 ICFR0063 SIFLICFR000603 IT 21cfr11 v6.3 913 ICRE0463 SIFLICRE040603 IT 200000 Credits v6.3 914 IDR10063 SIFLIDR1000603 IT Driver 3964R v6.3 915 IDR20063 SIFLIDR2000603 IT Driver Modbus RTU v6.3 916 IHBU0063 SIFLIHBU000603 IT Hot Backup for Process Tags v6.3 917 IIMC0063 SIFLIIMC000603 IT IMC v6.3 918 IISCI763 SIFLIISCI70603 IT Interspec Client (25) v6.3 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 302 EKB Installer 919 IISSI063 SIFLIISSI00603 IT Interspec Standard Server v6.3 920 IISSI363 SIFLIISSI30603 IT Interspec Advanced Server v6.3 921 IOEE0063 SIFLIOEE000603 IT OEE/DTM v6.3 922 IOEE8063 SIFLIOEE800603 IT OEE/DTM (800) v6.3 923 IPDE0063 SIFLIPDE000603 IT PDE v6.3 924 IRMSR063 SIFLIRMSR00603 IT Report Manager Server v6.3 925 ISQMS0063 SIFLISQMS00603 IT SAP QM Interface v6.3 926 ISVCH063 SIFLISVCH00603 IT Services for Historian Standard v6.3 927 IULCU763 SIFLIULCU70603 IT Unilab Client (25) v6.3 928 IULSU363 SIFLIULSU30603 IT Unilab Standard Server v6.3 929 IULSU663 SIFLIULSU60603 IT Unilab Advanced Server v6.3 930 IUPPU063 SIFLIUPPU00603 IT Unilab Pocket PC v6.3 931 IUUCU063 SIFLIUUCU00603 IT Unilab Uniconnect v6.3 932 IRMC0263 SIFLIRMC020603 IT Report Manager 25 concurrent client v6.3 933 IXLS0063 SIFLIXLS000603 IT Excel Add-in v6.3 9.27.1 Production Suite Production Suite floppy disk keyset PRS v6.1 SP1 PRS v6.3 SIFLIAMD000601.E Alarm Manager Display KB SIFLIAMG060601.E Alarm Manager (30000) KB SIFLICBE000601.EK CAB Engineering B SIFLICBE000603 CAB Engineering SIFLICFR000603 21cfr11 SIFLICRE040603 200000 Credits SIFLICLIP70601.EK Production Suite Client (25) B SIFLICSV000601.EK Compliance Services B SIFLIDEM000601.E KB Real Time Data Engine Manager SIFLIDFM000601.E KB Product Definition Manager SIFLIDIS000601.EK Data Integration Service B © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list SIFLIDOC000601.E KB SAP Connector iDOC SIFLIDOC000603 SAP Connector iDOC SIFLIDR1000601.EK Driver 3964R B SIFLIDR1000603 Driver 3964R SIFLIDR2000601.EK Driver Modbus RTU B SIFLIDR2000603 Driver Modbus RTU SIFLIDR3000601.EK Driver OPC Client B SIFLIDR3000603 Driver OPC Client SIFLIFNDP00601.E KB Backup Foundation for Production Suite SIFLIGUD000601.E KB GUI Development SIFLIGUR000601.E KB GUI Run-Time 303 SIFLIGUD000603 Historian Basic - Development Enviroments SIFLIHBU000603 Hot Backup for Process Tags SIFLIHDD000601.E KB Historian Data Display SIFLIIMC000601.EK IMC B SIFLIMAM000601. EKB SIFLIIMC000603 Historian Basic - IMC Material Manager SIFLIMMQ000601.E Microsoft Message Queue KB Connector SIFLIMMQ0006 03 SIFLIMQS000601.E KB SIFLIMQS00060 MQ Series Connector 3 MQ Series Connector Microsoft Message Queue Connector SIFLIOEE000601 OEE/DTM SIFLIODS000601.E KB On Line Debugging Support SIFLIOEE080601.EK OEE/DTM (800) B SIFLIPDA060601.E KB Plant Data Archive (10000) SIFLIPDE000601.EK PDE B SIFLIPMS080601.E KB Production Modeler (800) SIFLIPMT000601.E KB Production Modeler Engineering Client (4) SIFLIPOM000601.E KB Production Orders Manager SIFLIPPA060601.EK Plant Performance Analyzer B (30000) SIFLIPRM000601.E KB Personnel Manager © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 SIFLIPDE000603 Historian Basic - PDE SIFLIPMT00060 3 Production Modeler Engineering Client (4) 304 EKB Installer SIFLIRDE000601.EK Real Time Data Engine B SIFLIRDS000601.EK Real Time Data Server B SIFLISCM000601.E KB Scanner Manager (100) SIFLISCM00060 3 Scanner Manager (100) SIFLISFC000601.EK SAP Connector sRFC B SIFLISFC000603 SAP Connector sRFC SIFLISVCP00601.EK Services for Production Suite B SIFLISVCP00603 Services for Production Suite SIFLITFC000601.EK SAP Connector tRFC B SIFLITFC000603 SAP Connector tRFC SIFLIXLS000601.EK Excel Add-in B 9.27.1.1 PRS v6.1 SP1 PRS v6.1 SP1 SIFLIAMD000601.EKB Alarm Manager Display SIFLIAMG060601.EKB Alarm Manager (30000) SIFLICBE000601.EKB CAB Engineering SIFLICLIP70601.EKB Production Suite Client (25) SIFLICSV000601.EKB Compliance Services SIFLIDEM000601.EKB Real Time Data Engine Manager SIFLIDFM000601.EKB Product Definition Manager SIFLIDIS000601.EKB Data Integration Service SIFLIDOC000601.EKB SAP Connector iDOC SIFLIDR1000601.EKB Driver 3964R SIFLIDR2000601.EKB Driver Modbus RTU SIFLIDR3000601.EKB Driver OPC Client SIFLIFNDP00601.EKB Backup Foundation for Production Suite SIFLIGUD000601.EKB GUI Development SIFLIGUR000601.EKB GUI Run-Time SIFLIHDD000601.EKB Historian Data Display SIFLIIMC000601.EKB IMC SIFLIMAM000601.EKB Material Manager SIFLIMMQ000601.EKB Microsoft Message Queue Connector SIFLIMQS000601.EKB MQ Series Connector © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list SIFLIODS000601.EKB On Line Debugging Support SIFLIOEE080601.EKB OEE/DTM (800) SIFLIPDA060601.EKB Plant Data Archive (10000) SIFLIPDE000601.EKB PDE SIFLIPMS080601.EKB Production Modeler (800) SIFLIPMT000601.EKB Production Modeler Engineering Client (4) SIFLIPOM000601.EKB Production Orders Manager SIFLIPPA060601.EKB Plant Performance Analyzer (30000) SIFLIPRM000601.EKB Personnel Manager SIFLIRDE000601.EKB Real Time Data Engine SIFLIRDS000601.EKB Real Time Data Server SIFLISCM000601.EKB Scanner Manager (100) SIFLISFC000601.EKB SAP Connector sRFC SIFLISVCP00601.EKB Services for Production Suite SIFLITFC000601.EKB SAP Connector tRFC SIFLIXLS000601.EKB Excel Add-in 9.27.1.2 PRS v6.3 PRS v6.3 SIFLICBE000603.EKB CAB Engineering SIFLICFR000603.EKB 21cfr11 SIFLICRE040603.EKB 200000 Credits SIFLIDOC000603.EKB SAP Connector iDOC SIFLIDR1000603.EKB Driver 3964R SIFLIDR2000603.EKB Driver Modbus RTU SIFLIDR3000603.EKB Driver OPC Client SIFLIGUD000603.EKB Historian Basic - Development Enviroments SIFLIHBU000603.EKB Hot Backup for Process Tags SIFLIIMC000603.EKB Historian Basic - IMC SIFLIMMQ000603.EKB Microsoft Message Queue Connector SIFLIMQS000603.EKB MQ Series Connector SIFLIOEE000601.EKB OEE/DTM SIFLIPDE000603.EKB Historian Basic - PDE SIFLIPMT000603.EKB Production Modeler Engineering Client (4) SIFLISCM000603.EKB Scanner Manager (100) SIFLISFC000603.EKB SAP Connector sRFC SIFLISVCP00603.EKB Services for Production Suite © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 305 306 EKB Installer SIFLITFC000603.EKB SAP Connector tRFC 9.27.2 Report Manager Report Manager v6.3 SIFLIRMC020603.EKB Report Manager 25 concurrent client SIFLIRMSR00603.EKB Report Manager Server 9.27.3 Historian Historian floppy disk keyset Historian v6.1 SIFLIAMD000601.EKB Alarm Manager Display SIFLIAMG060601.EKB Alarm Manager (30000) SIFLICBE000601.EKB CAB Engineering SIFLICLIP70601.EKB Historian v6.3 SIFLICBE000603.EK B CAB Engineering SIFLICFR000603.EK B 21cfr11 SIFLICRE040603.EK B 200000 Credits Production Suite Client (25) SIFLIDOC000603.EK SAP Connector iDOC B SIFLICSV000601.EKB Compliance Services SIFLIDEM000601.EKB Real Time Data Engine Manager SIFLIDR1000601.EKB Driver 3964R SIFLIDR1000603.EK B Driver 3964R SIFLIDR2000601.EKB Driver Modbus RTU SIFLIDR2000603.EK B Driver Modbus RTU SIFLIDR3000601.EKB Driver OPC Client SIFLIDR3000603.EK B Driver OPC Client SIFLIFNDP00601.EKB Backup Foundation for Production Suite SIFLIGUD000601.EKB GUI Development SIFLIGUR000601.EKB GUI Run-Time SIFLIGUD000603.EK Historian Basic B Development Enviroments SIFLIHBU000603.EK Hot Backup for Process Tags B SIFLIHDD000601.EKB Historian Data Display SIFLIIMC000601.EKB IMC SIFLIIMC000603.EK B Historian Basic - IMC SIFLIMMQ000603.E Microsoft Message Queue © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list KB Connector SIFLIMQS000603.EK MQ Series Connector B SIFLIOEE080601.EKB OEE/DTM (800) SIFLIODS000601.EKB On Line Debugging Support SIFLIPDE000601.EKB PDE SIFLIPPA060601.EKB Plant Performance Analyzer (30000) SIFLIRDE000601.EKB Real Time Data Engine SIFLIRDS000601.EKB Real Time Data Server SIFLIOEE000601.EK B OEE/DTM SIFLIPDE000603.EK B Historian Basic - PDE SIFLISCM000603.EK Scanner Manager (100) B SIFLISFC000603.EK B SIFLISVCP00601.EKB SAP Connector sRFC Services for Production Suite SIFLISVCH00603.EK Services for Historian B Standard SIFLITFC000603.EK B SIFLIPDA060601.EKB Plant Data Archive (10000) SIFLIXLS000601.EKB Excel Add-in 9.27.3.1 Historian v6.1 Historian v6.1 SIRTIAMD000601.EKB Alarm Manager Display SIRTIAMG060601.EKB Alarm Manager (30000) SIRTICBE000601.EKB CAB Engineering SIRTICLIP70601.EKB Production Suite Client (25) SIRTICSV000601.EKB Compliance Services SIRTIDEM000601.EKB Real Time Data Engine Manager SIRTIDR1000601.EKB Driver 3964R SIRTIDR2000601.EKB Driver Modbus RTU SIRTIDR3000601.EKB Driver OPC Client SIRTIFNDP00601.EKB Backup Foundation for Production Suite SIRTIGUD000601.EKB GUI Development © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 SAP Connector tRFC 307 308 EKB Installer SIRTIGUR000601.EKB GUI Run-Time SIRTIHDD000601.EKB Historian Data Display SIRTIIMC000601.EKB IMC SIRTIODS000601.EKB On Line Debugging Support SIRTIOEE080601.EKB OEE/DTM (800) SIRTIPDA060601.EKB Plant Data Archive (10000) SIRTIPDE000601.EKB PDE SIRTIPPA060601.EKB Plant Performance Analyzer (30000) SIRTIRDE000601.EKB Real Time Data Engine SIRTIRDS000601.EKB Real Time Data Server SIRTISVCP00601.EKB Services for Production Suite SIRTIXLS000601.EKB Excel Add-in 9.27.3.2 Historian v6.3 Historian v6.3 SIFLICBE000603.EKB CAB Engineering SIFLICFR000603.EKB 21cfr11 SIFLICRE040603.EKB 200000 Credits SIFLIDOC000603.EKB SAP Connector iDOC SIFLIDR1000603.EKB Driver 3964R SIFLIDR2000603.EKB Driver Modbus RTU SIFLIDR3000603.EKB Driver OPC Client SIFLIGUD000603.EKB Historian Basic - Development Enviroments SIFLIHBU000603.EKB Hot Backup for Process Tags SIFLIIMC000603.EKB Historian Basic - IMC SIFLIMMQ000603.EKB Microsoft Message Queue Connector SIFLIMQS000603.EKB MQ Series Connector SIFLIOEE000601.EKB OEE/DTM SIFLIPDE000603.EKB Historian Basic - PDE SIFLISCM000603.EKB Scanner Manager (100) SIFLISFC000603.EKB SAP Connector sRFC SIFLISVCH00603.EKB Services for Historian Standard SIFLITFC000603.EKB SAP Connector tRFC 9.27.4 Interspec Interspec v6.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list SIFLIISCI70601.EKB Interspec Client (25) SIFLIISSI00601.EKB Interspec Standard Server SIFLIISSI30601.EKB Interspec Advanced Server 9.27.5 Unilab Unilab v6.1 SIFLIDIS000601.EKB Data Integration Service SIFLISQMS00601.EKB SAP QM Interface SIFLIULCU70601.EKB Unilab Client (25) SIFLIULSU30601.EKB Unilab Standard Server SIFLIULSU60601.EKB Unilab Advanced Server SIFLIUPPU00601.EKB Unilab Pocket PC SIFLIUUCU00601.EKB Unilab Uniconnect 9.27.6 Simatic IT Russian Enter topic text here. 9.27.6.1 Production Suite Russian Описание SIMATIC IT MIS V6.1 SMALL, ИНФОРМАЦИОННАЯ СРЕДА ПРОИЗВОДСТВА, БАЗОВЫЙ ПРОДУКТ,НОСИТЕЛЬ ДАННЫХ, 6BQ3111-2AA03-0CA0 ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT MIS V6.1 РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА ОТ УРОВНЯ SMALL ДО MEDIUM, 6BQ3111-2AA12-0CD0 БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ,ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT MIS V6.1 РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА ОТ УРОВНЯ MEDIUM ДО LARGE, 6BQ3111-2AA22-0CD0 БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ,ИСПОЛНЯЕМОЕ ПРОГР.ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW© 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 309 310 EKB Installer CLASS B, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМОЕ SIMATIC IT GENEALOGY MGMT V6.1 SMALL, БАЗОВЫЙ ПРОДУКТ, НОСИТЕЛЬ ДАННЫХ, 6BQ3111-2BA03-0CA0 ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT GENEALOGY MGMT V6.1 POWERPACK SMALL TO MEDIUM, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА GENEALOGY 6BQ3111-2BA12-0CD0 MGMT V6.1 ОТ УРОВНЯ SMALL ДО MEDIUM БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ,ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS SIMATIC IT GENEALOGY MGMT V6.1 POWERPACK MEDIUM TO LARGE, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА GENEALOGY 6BQ3111-2BA22-0CD0 MGMT V6.1 ОТ УРОВНЯ MEDIUM ДО LARGE, БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ,ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLAS SIMATIC IT ORDER MGMT V6.1 SMALL БАЗОВЫЙ ПРОДУКТ,НОСИТЕЛЬ ДАННЫХ, 6BQ3111-2CA03-0CA0 ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT ORDER MGMT V6.1 POWERPACK SMALL TO MEDIUM, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА ORDER MGMT ВЕРСИИ 6.1, ОТ 6BQ3111-2CA12-0CD0 УРОВНЯ SMALL ДО MEDIUM БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ,ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS SIMATIC IT ORDER MGMT V6.1 POWERPACK MEDIUM TO LARGE, РАСШИРЕНИЕ 6BQ3111-2CA22-0CD0 ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА ORDER MGMT ВЕРСИИ 6.1 ОТ © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list УРОВНЯ MEDIUM ДО LARGE, БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ,ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS SIMATIC IT BASIC T&T V6.1 SMALL БАЗОВЫЙ ПРОДУКТ,НОСИТЕЛЬ ДАННЫХ,ЛИЦЕНЗИЯ НА 6BQ3111-2DA23-0CA0 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT BASIC T&T V6.1 POWERPACK SMALL TO MEDIUM, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА BASIC T&T ВЕРСИИ 6.1, ОТ УРОВНЯ 6BQ3111-2DA32-0CD0 SMALL ДО MEDIUM, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS B SIMATIC IT BASIC T&T V6.1 POWERPACK MEDIUM TO LARGE, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА BASIC T&T ВЕРСИИ 6.1, ОТ УРОВНЯ 6BQ3111-2DA42-0CD0 MEDIUM ДО LARGE, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS B SIMATIC IT BASIC PROD MGMT V6.1 SMALL БАЗОВЫЙ ПРОДУКТ,НОСИТЕЛЬ ДАННЫХ, 6BQ3111-2EA23-0CA0 ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT BASIC PROD MGMT V6.1 POWERPACK SMALL TO MEDIUM, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА BASIC PROD MGMT 6BQ3111-2EA32-0CD0 ВЕРСИИ 6.1 ОТ УРОВНЯ SMALL ДО MEDIUM, БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ,ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, 6BQ3111-2EA42-0CD0 SIMATIC IT BASIC PROD MGMT V6.1 POWERPACK MEDIUM TO LARGE, © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 311 312 EKB Installer РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА BASIC PROD MGMT ВЕРСИИ 6.1 ОТ УРОВНЯ MEDIUM ДО LARGE, БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ,ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SIMATIC IT PROD SUITE V6.1 SMALL, ПАКЕТ ПРОГР. ОБЕСПЕЧЕНИЯ ДЛЯ РАЗРАБОТКИ И ОБСЛУЖИВАНИЯ ИСПОЛНИТЕЛЬНОЙ СИСТЕМЫ ПРОИЗВОДСТВА (MES) УРОВЕНЬ 6BQ3111-2FA23-0CA0 SMALL, БАЗОВЫЙ ПРОДУКТ,НОСИТЕЛЬ ДАННЫХ,ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., CD, SW-CLASS B, МНОГОЯЗ SIMATIC IT PROD SUITE V6.1 POWERPACK SMALL TO MEDIUM, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА PROD SUITE ВЕРСИИ 6.1 ОТ УРОВНЯ 6BQ3111-2FA32-0CD0 SMALL ДО MEDIUM, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS SIMATIC IT PROD SUITE V6.1 POWERPACK MEDIUM TO LARGE, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА PROD SUITE ВЕРСИИ 6.1 ОТ УРОВНЯ 6BQ3111-2FA42-0CD0 MEDIUM ДО LARGE, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS SIMATIC IT PROD SUITE V6.1 1 CONCURRENT CLIENT, 1 ОДНОВРЕМЕННЫЙ КЛИЕНТ ДЛЯ PROD SUITE ВЕРСИИ 6.1 БАЗОВЫЙ ПРОДУКТ, 6BQ3111-2FA52-0CB0 ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT PROD SUITE V6.1 10 CONCURRENT 6BQ3111-2FA62-0CB0 CLIENTS, 10 ОДНОВРЕМЕННЫХ КЛИЕНТОВ ДЛЯ PROD SUITE ВЕРСИИ 6.1, БАЗОВЫЙ © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 10 ПОЛЬЗОВАТЕЛЕЙ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT PROD SUITE V6.1 25 CONCURRENT CLIENTS, 25 ОДНОВРЕМЕННЫХ КЛИЕНТОВ ДЛЯ PROD SUITE ВЕРСИИ 6.1, БАЗОВЫЙ 6BQ3111-2FA72-0CB0 ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 25 ПОЛЬЗОВАТЕЛЕЙ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT CAB V6.1 CLIENT APPLICATION BUILDER ENGINEERING, ПРОГРАММНОЕ СРЕДСТВО РАЗРАБОТКИ КЛИЕНТСКИХ 6BQ3112-2AA02-0CB0 ПРИЛОЖЕНИЙ ДЛ SIMATIC IT, БАЗОВЫЙ ПРОДУКТ,НОСИТЕЛЬ ДАННЫХ,ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, E-SW, CD SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT PRODUCT DEFINITION MANAGER V6.1, БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ 6BQ3112-2AA12-0CB0 НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT FRAMEWORK V6.1, 4 ДОПОЛНИТЕЛЬНЫХ СЕССИИ РАЗРАБОТЧИКА, БАЗОВЫЙ ПРОДУКТ, 6BQ3112-2AA22-0CB0 ТОЛЬКО ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 4 ПОЛЬЗОВАТЕЛЕЙ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT SCANNER MANAGER V6.1 МЕНЕДЖЕР СКАНЕРОВ-ШТРИХ КОДОВ, ДО 100 СКАНЕРОВ, БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО 6BQ3112-2AA32-0CB0 ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SWCLASS B, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМОЕ SIMATIC IT SAP CONNECTOR V6.1 IDOC, 6BQ3112-2AA42-0CB0 ПОДКЛЮЧЕНИЕ К SAP (IDOC), БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 313 314 EKB Installer ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT SAP CONNECTOR V6.1 TRFC, ПОДКЛЮЧЕНИЕ К SAP (TRFC), БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 6BQ3112-2AA52-0CB0 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT SAP CONNECTOR V6.1 SRFC, ПОДКЛЮЧЕНИЕ К SAP (SRFC), БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 6BQ3112-2AA62-0CB0 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT CONNECTOR V6.1 MQ-SERIES, БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 6BQ3112-2AA72-0CB0 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT CONNECTOR V6.1 MICROSOFT MESSAGE QUEUE, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, 6BQ3112-2AA82-0CB0 ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SWCLASS B, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМОЕ SIMATIC IT REPORT MANAGER V6.1 SERVER, ПРОГРАММНЫЙ ПАКЕТ УПРАВЛЕНИЯ ОТЧЕТАМИ (СЕРВЕРНАЯ ЧАСТЬ) ДЛЯ SIMATIC 6BQ3112-2AB03-0AA0 IT, БАЗОВЫЙ ПРОДУКТ,НОСИТЕЛЬ ДАННЫХ, ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT REPORT MANAGER V6.1 UNIVERSE CUSTOMIZER, ПРОГРАММНЫЙ ПАКЕТ ДЛЯ РАЗРАБОТКИ ФОРМ ОТЧЕТОВ ДЛЯ SIMATIC 6BQ3112-2AB12-0AB0 IT, БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, СРЕДА РАЗРАБОТКИ, БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list SIMATIC IT REPORT MANAGER V6.1 1 CONCURRENT CLIENT, 1 ОДНОВРЕМЕННЫЙ КЛИЕНТ ДЛЯ ПРОГРАММНОГО ПАКЕТА УПРАВЛЕНИЯ ОТЧЕТАМИ REPORT MANAGER 6BQ3112-2AB22-0AB0 ДЛЯ SIMATIC IT, БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS SIMATIC IT REPORT MANAGER V6.1 10 CONCURRENT CLIENTS, 10 ОДНОВРЕМЕННЫХ КЛИЕНТОВ ДЛЯ ПРОГРАММНОГО ПАКЕТА УПРАВЛЕНИЯ ОТЧЕТАМИ REPORT MANAGER 6BQ3112-2AB32-0AB0 ДЛЯ SIMATIC IT, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 10 ПОЛЬЗОВАТЕЛЕЙ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SIMATIC IT REPORT MANAGER V6.1 25 CONCURRENT CLIENTS, 25 ОДНОВРЕМЕННЫХ КЛИЕНТОВ ДЛЯ ПРОГРАММНОГО ПАКЕТА УПРАВЛЕНИЯ ОТЧЕТАМИ REPORT MANAGER 6BQ3112-2AB42-0AB0 ДЛЯ SIMATIC IT, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 25 ПОЛЬЗОВАТЕЛЕЙ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SIMATIC IT 21CFR11 OPTION V6.1 ОПЦИЯ СООТВЕТСТВИЯ НОРМЕ 21CFR11 ДЛЯ MIS, GENEALOGY, ORDER MGMT SMALL БАЗОВЫЙ 6BQ3112-2AC32-0CB0 ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT 21CFR11 OPTION V6.1 РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ОПЦИИ СООТВЕТСТВИЯ НОРМЕ 21CFR11 ДЛЯ MIS, GENEALOGY, 6BQ3112-2AC42-0CD0 ORDER MGMT ОТ УРОВНЯ SMALL ДО MEDIUM БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B 6BQ3112-2AC52-0CD0 SIMATIC IT 21CFR11 OPTION V6.1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 315 316 EKB Installer РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ОПЦИИ СООТВЕТСТВИЯ НОРМЕ 21CFR11 ДЛЯ MIS, GENEALOGY, ORDER MGMT ОТ УРОВНЯ MEDIUM ДО LARGE, БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SWCLASS SIMATIC IT 21CFR11 OPTION V6.1 ОПЦИЯ СООТВЕТСТВИЯ НОРМЕ 21CFR11 ДЛЯ BASIC PROD MGMT, BASIC T&T SMALL БАЗОВЫЙ 6BQ3112-2AD02-0CB0 ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT 21CFR11 OPTION V6.1 РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ОПЦИИ СООТВЕТСТВИЯ НОРМЕ 21CFR11 ДЛЯ BASIC PROD MGMT, 6BQ3112-2AD12-0CD0 BASIC T&T ОТ УРОВНЯ SMALL ДО MEDIUM, БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS SIMATIC IT 21CFR11 OPTION V6.1 РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ОПЦИИ СООТВЕТСТВИЯ НОРМЕ 21CFR11 ДЛЯ BASIC PROD MGMT, 6BQ3112-2AD22-0CD0 BASIC T&T ОТ УРОВНЯ MEDIUM ДО LARGE БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B SIMATIC IT 21CFR11 OPTION V6.1 ОПЦИЯ СООТВЕТСТВИЯ НОРМЕ 21CFR11 ДЛЯ PRODUCTION SUITE SMALL, БАЗОВЫЙ 6BQ3112-2AD32-0CB0 ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ 6BQ3112-2AD42-0CD0 SIMATIC IT 21CFR11 OPTION V6.1 РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list ВОЗМОЖНОСТЕЙ ОПЦИИ СООТВЕТСТВИЯ НОРМЕ 21CFR11 ДЛЯ PRODUCTION SUITE ОТ УРОВНЯ SMALL ДО MEDIUM БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B, МНОГОЯЗЫ SIMATIC IT 21CFR11 OPTION V6.1 РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ОПЦИИ СООТВЕТСТВИЯ НОРМЕ 21CFR11 ДЛЯ PRODUCTION SUITE ОТ 6BQ3112-2AD52-0CD0 УРОВНЯ MEDIUM ДО LARGE БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B, МНОГОЯЗЫ SIMATIC IT OEE/DTM V6.1 ENTRY LEVEL BUNDLE БАЗОВЫЙ ПРОДУКТ,НОСИТЕЛЬ 6BQ3112-2AE03-0AA0 ДАННЫХ,ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT OEE/DTM V6.1 OPTION 100 EQUIPMENTS БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, 6BQ3112-2AE12-0AB0 ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT OEE/DTM V6.1 POWERPACK 100 ДО 400 EQUIPMENTS БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, 6BQ3112-2AE22-0AD0 ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT OEE/DTM V6.1 POWERPACK 400 ДО 800 EQUIPMENTS БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, 6BQ3112-2AE32-0AD0 ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ SIMATIC IT POWERPACK V6.1, ПАКЕТ 6BQ3112-2AE42-0AD0 РАСШИРЕНИЯ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ SIMATIC IT ОТ OEE/DTM © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 317 318 EKB Installer ENTRY LEVEL ДО HISTORIAN SMALL + OEE 100 EQUIP БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS B, МНОГО 9.27.6.2 Production Suite Программный пакет SIMATIC IT Production Suite позволяет потребителям разрабатывать и обслуживать исполнительные системы производства - Manufacturing Execution Systems (MES), которые эффективно синхронизируют, координируют, анализируют и оптимизируют выпуск продукции. Он покрывает большинство функциональных возможностей требующихся от MES системы, определённых стандартом S95.Этот стандарт и обеспечивает основное направление развития SIMATIC IT. SIMATIC IT Production Suite это мощное средство, позволяющее быстро разрабатывать производственную модель установки. Оно обеспечивает уникальное преимущество – возможность преобразования такой модели в полностью рабочее приложение с использованием SIMATIC IT или компонентов прочих поставщиков. Пакет программного обеспечения SIMATIC IT Production Suite включает в себя как компоненты SIMATIC IT Components, так и объектную структуру SIMATIC IT Framework. Компоненты SIMATIC IT Components (SIMATIC IT Production Order Manager, SIMATIC IT Material Manager, SIMATIC IT Messaging Manager, SIMATIC IT Personnel Manager, SIMATIC IT Report Manager) обеспечивают основные гарантированные функциональные возможности MES. Каждый компонент относится к отдельной производственной задаче, такой, как управление заказами, управление материалами, управление персоналом и управление отчётами (дополнительно). Объектная структура SIMATIC IT Framework предлагает среду моделирования, в которой разнообразные функции различных компонентов SIMATIC IT Components объединяются графическим способом для точного определения логики исполнения (подход явных правил) В среде разработки объектной структуры SIMATIC IT Framework создаётся модель установки из элементов физических объектов (реальные устройства и оборудование) и логических объектов (программных пакетов и приложений). Явное определение логики исполнения, которая также определяет взаимодействие между объектами, описанными в модели установки, носит название «Производственные Операции». Пакет ПО SIMATIC IT Production также обеспечивает возможность интеграции © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 319 компонентов сторонних производителей и уже используемых приложений. Обычно, существующие приложения работают на участках интегрированных внутрь Production Suite, так что они координируются и вызываются в соответствии с логикой, определённой SIMATIC IT Framework. Таким способом компоненты сторонних производителей и уже используемые приложения отображаются и обращаются так же как и SIMATIC IT Components. Объектная среда SIMATIC IT Framework может координировать выполнение всего процесса и отдельных связанных операций. Результатом этого служит намного более эффективная интеграция между различными системами и продвижение к значительному росту эффективности системы производства продукции. Область применения Компании могут использовать программный пакет SIMATIC IT Production Suite внедрять и обслуживать исполнительные системы производства - Manufacturing Execution Systems (MES), которые эффективно синхронизируют, координируют, анализируют и оптимизируют выпуск продукции. Программный пакет SIMATIC IT Production Suite охватывает большинство функциональных возможностей, определённых стандартом S95. Стандарт S95 является основой, на которой разработан SIMATIC IT. Дизайн Программный пакет SIMATIC IT Production Suite состоит из следующих составных частей: Компоненты SIMATIC IT Components – обеспечивают базовые функциональные возможности MES. Состоят из: SIMATIC IT Production Order Manager:для управления заказами. SIMATIC IT Material Manager:для управления материалами. SIMATIC IT Personnel Manager:для управления персоналом. SIMATIC IT Messaging Manager:для управления сообщениями. SIMATIC IT Report Manager:для управления отчетами. Объектная структура SIMATIC IT Framework: среда разработки и моделирования для комбинации модульных функции графическим методом. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 320 EKB Installer Функции Графическое проектирование: Объектная структура SIMATIC IT Framework обеспечивает среду разработки и моделирования, которая позволяет объединить графическим способом разнообразные функции отдельных модулей компонентов SIMATIC IT Components для точного определения логики исполнения (подход явных правил). Модель установки создаётся из физических объектов (реальные устройства и оборудование) и логических объектов (программных пакетов и приложений) в среде разработки объектной структуры SIMATIC IT Framework. Явное определение логики исполнения, которая также определяет взаимодействие между объектами, описанными в модели установки, именуется «производственной процедурой». Интеграция существующих приложений: Программный пакет SIMATIC IT Production Suite позволяет интегрировать как компоненты сторонних поставщиков, так и уже существующие приложения. Обычно, существующие приложения интегрируются в Production Suite таким образом, что они могут быть скоординированы и вызваны в соответствии с логикой, определённой SIMATIC IT Framework. Таким способом компоненты сторонних производителей и уже используемые приложения отображаются и обрабатываются так же как и компоненты SIMATIC IT Components. Разработка исполняемых приложений: Сгенерированная модель может быть полностью конвертирована в рабочее приложение, которое использует как все функциональные возможности SIMATIC IT, так и те, что обеспечиваются компонентами сторонних производителей. 9.27.6.3 SIMATIC IT Historian Заказные данные Заказной № 6BQ3074-2AA03-0CA0 Описание Мин. Вес Дост зак. (кг) авка (шт) SIMATIC IT HISTORIAN V6.1 SERVER SMALL, ПРОГРАММНОЕ ОБЕСПЕЧЕНИЯ ДЛЯ СБОРА И ОБРАБОТКИ ДАННЫХ О ПРОИЗВОДСТВЕ, МАЛЫЙ СЕРВЕР БАЗОВЫЙ ПРОДУКТ,НОСИТЕЛЬ ДАННЫХ,ЛИЦЕНЗИЯ НА 1 6-8 0 неде ль 1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 321 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., CD SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ 6BQ3074-2AA12-0CD0 SIMATIC IT HISTORIAN V6.1 SERVER, ПАКЕТ РАСШИРЕНИЯ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ SMALL-MEDIUM, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧЕНИЕ, БЕЗ НОСИТЕЛЕЙ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНЫЙ, PC-СОВМЕСТИМЫЙ 3-4 0 неде ли 1 6BQ3074-2AA22-0CD0 SIMATIC IT HISTORIAN V6.1 SERVER, ПАКЕТ РАСШИРЕНИЯ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ MEDIUM-LARGE, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧЕНИЕ, БЕЗ НОСИТЕЛЕЙ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНЫЙ, PC-СОВМЕСТИМЫЙ по 0 запр осу 1 6BQ3074-2AA32-0CB0 SIMATIC IT HISTORIAN V6.1 FAT CLIENT "ТОЛСТЫЙ КЛИЕНТ" ДЛЯ ПАКЕТА ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ ДЛЯ СБОРА И ОБРАБОТКИ ИНФОРМАЦИИ В РАМКАХ ИНФОРМАЦИОННОЙ СИСТЕМЫ ПРОИЗВОДСТВА (MIS), БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧЕ 4-5 0 неде ль 1 6BQ3074-2AA42-0CB0 SIMATIC IT HISTORIAN V6.1 1 ОДНОВРЕМЕННЫЙ ПОЛЬЗОВАТЕЛЬ ДЛЯ ПАКЕТА ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ ДЛЯ СБОРА И ОБРАБОТКИ ИНФОРМАЦИИ В РАМКАХ ИНФОРМАЦИОННОЙ СИСТЕМЫ ПРОИЗВОДСТВА (MIS), БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧ 3-4 0 неде ли 1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 322 EKB Installer 6BQ3074-2AA52-0CB0 SIMATIC IT HISTORIAN V6.1 10 ОДНОВРЕМЕННЫХ ПОЛЬЗОВАТЕЛЕЙ ДЛЯ ПАКЕТА ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ ДЛЯ СБОРА И ОБРАБОТКИ ИНФОРМАЦИИ В РАМКАХ ИНФОРМАЦИОННОЙ СИСТЕМЫ ПРОИЗВОДСТВА (MIS), БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 10 ПОЛЬЗОВАТЕЛЕЙ, ИСПОЛНЯЕМОЕ по 0 запр осу 1 6BQ3074-2AA62-0CB0 SIMATIC IT HISTORIAN V6.1 25 ОДНОВРЕМЕННЫХ ПОЛЬЗОВАТЕЛЕЙ ДЛЯ ПАКЕТА ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ ДЛЯ СБОРА И ОБРАБОТКИ ИНФОРМАЦИИ В РАМКАХ ИНФОРМАЦИОННОЙ СИСТЕМЫ ПРОИЗВОДСТВА (MIS), БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 25 ПОЛЬЗОВАТЕЛЕЙ, ИСПОЛНЯЕМОЕ по 0 запр осу 1 6BQ3074-2AB03-0CA0 SIMATIC IT HISTORIAN BASIC V6.1 SERVER SMALL, СЕРВЕР ПАКЕТА ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ ДЛЯ СБОРА И ОБРАБОТКИ ИНФОРМАЦИИ В РАМКАХ ИНФОРМАЦИОННОЙ СИСТЕМЫ ПРОИЗВОДСТВА (MIS) УРОВНЯ SMALL, БАЗОВЫЙ ПРОДУКТ, НОСИТЕЛЬ ДАННЫХ, ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМ 3-4 0 неде ли 1 6BQ3074-2AB12-0CD0 SIMATIC IT HISTORIAN BASIC POWERPACK SMALL-MEDIUM, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА SIMATIC IT HISTORIAN ОТ УРОВНЯ SMALL ДО MEDIUM, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧЕНИЕ, БЕЗ НОСИТЕЛЕЙ ДАННЫХ, SW-C 3-4 0 неде ли 1 6BQ3074-2AB22-0CD0 SIMATIC IT HISTORIAN BASIC POWERPACK SMALL-MEDIUM, 0 3-4 неде 1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА SIMATIC IT HISTORIAN ОТ УРОВНЯ MEDIUM ДО LARGE, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧЕНИЕ, БЕЗ НОСИТЕЛЕЙ ДАННЫХ, SW-C 323 ли 6BQ3074-2AB32-0CB0 SIMATIC IT HISTORIAN BASIC V6.1 FAT CLIENT "ТОЛСТЫЙ КЛИЕНТ"ДЛЯ ПАКЕТА ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ HISTORIAN BASIC V6.1 ДЛЯ СБОРА И ОБРАБОТКИ ИНФОРМАЦИИ В РАМКАХ ИНФОРМАЦИОННОЙ СИСТЕМЫ ПРОИЗВОДСТВА (MIS), БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, 3-4 0 неде ли 1 6BQ3074-2AB42-0CB0 SIMATIC IT HISTORIAN BASIC V6.1 DEVELOPMENT ENVIRONMENTS, СРЕДА РАЗРАБОТКИ ДЛЯ ПАКЕТА ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ HISTORIAN BASIC V6.1 ДЛЯ СБОРА И ОБРАБОТКИ ИНФОРМАЦИИ В РАМКАХ ИНФОРМАЦИОННОЙ СИСТЕМЫ ПРОИЗВОДСТВА (MIS), БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 3-4 0 неде ли 1 6BQ3074-2AB52-0CB0 SIMATIC IT HISTORIAN V6.1 REAL TIME DATA SERVER, СЕРВЕР ДАННЫХ РЕАЛЬНОГО ВРЕМЕНИ ДЛЯ ПАКЕТА ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ HISTORIAN V6.1, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧЕНИЕ, БЕЗ НОСИТЕЛЕЙ ДАННЫХ, SW-CLASS B, МНОГ 3-4 0 неде ли 1 6BQ3074-2AB62-0CB0 SIMATIC IT, OPC ДРАЙВЕР ДЛЯ ПАКЕТА ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ HISTORIAN V6.1, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧЕНИЕ, БЕЗ НОСИТЕЛЕЙ 4-5 0 неде ль 1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 324 EKB Installer ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНЫЙ, PC-СОВМЕСТИМЫЙ 6BQ3074-2AB72-0CB0 SIMATIC IT, ДРАЙВЕР 3964R ДЛЯ ПАКЕТА ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ HISTORIAN V6.1, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧЕНИЕ, БЕЗ НОСИТЕЛЕЙ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНЫЙ, PC-СОВМЕСТИМЫЙ 6-8 0 неде ль 1 6BQ3074-2AB82-0CB0 SIMATIC IT, ДРАЙВЕР MODBUS RTU ДЛЯ ПАКЕТА ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ HISTORIAN V6.1, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧЕНИЕ, БЕЗ НОСИТЕЛЕЙ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНЫЙ, PC-СОВМЕСТИМЫЙ 6-8 0 неде ль 1 6BQ3074-2AC02-0CB0 SIMATIC IT HISTORIAN BASIC V6.1 PDE ДЛЯ ПАКЕТА ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ HISTORIAN V6.1, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧЕНИЕ, БЕЗ НОСИТЕЛЕЙ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНЫЙ, PC-СОВМЕСТИМЫЙ 3-4 0 неде ли 1 6BQ3074-2AC12-0CB0 SIMATIC IT HISTORIAN BASIC V6.1 IMC ДЛЯ ПАКЕТА ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ HISTORIAN V6.1, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧЕНИЕ, БЕЗ НОСИТЕЛЕЙ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНЫЙ, PC-СОВМЕСТИМЫЙ 3-4 0 неде ли 1 6BQ3074-2PA03-0CC0 SIMATIC IT HISTORIAN V6.1 POWERPACK BASIC SMALL STD SMALL,, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ПАКЕТА ОТ УРОВНЯ BASIC SMALL ДО STD SMALL, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 4-5 0 неде ль 1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 325 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SWCLASS B, М 6BQ3074-2PA13-0CC0 SIMATIC IT HISTORIAN V6.1 POWERPACK BASIC MED STD MEDIUM, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ОТ BASIC MED ДО STD MED, БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SWCLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕ 4-5 0 неде ль 1 6BQ3074-2PA23-0CC0 SIMATIC IT HISTORIAN V6.1 POWERPACK BASIC LARGE STD LARGE, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ОТ BASIC LARGE ДО STD LARGE, БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ НОСИТЕЛЯ ДАННЫХ, SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC- 4-5 0 неде ль 1 6BQ3112-2AC02-0CB0 SIMATIC IT 21CFR11 OPTION V6.1 ОПЦИЯ СООТВЕТСТВИЯ НОРМЕ 21CFR11 ДЛЯ HISTORIAN SMALL, БАЗОВЫЙ ПРОДУКТ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD SW-CLASS B, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ 4-5 0 неде ль 1 6BQ3112-2AC12-0CD0 SIMATIC IT 21CFR11 OPTION V6.1 РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ОПЦИИ СООТВЕТСТВИЯ НОРМЕ 21CFR11 ДЛЯ HISTORIAN ОТ УРОВНЯ SMALL ДО MEDIUM БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, P 4-5 0 неде ль 1 6BQ3112-2AC22-0CD0 SIMATIC IT 21CFR11 OPTION V6.1 РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ ОПЦИИ СООТВЕТСТВИЯ НОРМЕ 21CFR11 ДЛЯ HISTORIAN ОТ УРОВНЯ MEDIUM ДО 4-5 0 неде ль 1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 326 EKB Installer LARGE БАЗОВЫЙ ПРОДУКТ,ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСП., БЕЗ CD, SW-CLASS B, МНОГОЯЗЫЧНОЕ, P 9.27.6.4 SIMATIC IT Historian Программный продукт SIMATIC IT Historian снабжает деловой информацией всю организацию, для более эффективного принятия решений и оптимизации установки. Это набор программных модулей, которые собирают, контектуализируют, производят корреляцию, агрегируют и сохраняют информацию о процессе для: вычисления KPI гарантии качества ведения отчетности сертификации статистического анализа мониторинга производительности трассировки и отслеживания (Trace and Track) архивирования производственных данных и т.д. Эти данные становятся доступными через открытые и являющиеся промышленными стандартами интерфейсы. Программный продукт SIMATIC IT Historian обычно используется в среде информационной системы производства Manufacturing Information System (MIS/MES). В ней разнообразные данные должны быть собраны и контекстуализированы. Данные могут поступать как из процесса – как прямые измерения или с низкоуровневых счётчиков эффективности, так и от связанных баз данных – данные о заказах или данных о материалах. SIMATIC IT Historian поддерживают агрегацию информации с различных источников процесса и данных о продукции. Он выполняет агрегацию, используя, при необходимости, функцию валидации (подтверждения) как исходных данных, так и агрегированных данных. Так обеспечивается нормализованный вид производственной © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 327 информации. Контекстуализация после сбора данных позволяет поддерживать ключевые связи между данными и значимыми производственными событиями. Следовательно, сохранённые данные ассоциируются с производственным заказом, оборудованием, персоналом и так далее. Таким образом, данные могут быть извлечены из SIMATIC IT Historian с использованием контекстной информации, такой, как идентификационный номер производственного заказа, идентификационный номер оборудования, и т.д. Область применения Программный продукт SIMATIC IT Historian обеспечивает работу с важными для компании данными относящимися к бизнес-процессам, для более эффективного принятия решений и оптимизации установки. Программный продукт SIMATIC IT Historian обычно используется в системных областях информационной/исполнительной системы производства MIS/MES (Manufacturing Information System/Manufacturing Execution System).В таких средах различные типы данных должны быть собраны и снабжены соответствующим контекстом. Эти данные могут быть измеренными значениями или данными, обеспечивающими информацию о тех частях установки, которые недостаточно эффективны, или данными из связанных баз данных, такими как данные о заказах или материалах. Функции Программный продукт SIMATIC IT Historian включает множество программных модулей, которые используются для сбора данных процесса, привязывания данных к контексту, и показ их связей. Все эти данные могут быть затем сохранены. Вычисление KPI Гарантии качества Генерация отчетности Сертификации Статистический анализ Мониторинг производительности Трассировка и отслеживание © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 328 EKB Installer Архивирование производственных данных и т.д. Предусмотрен доступ к этим данным через открытые промышленные интерфейсы. SIMATIC IT Historian поддерживает сбор и получение данных о процессе и производстве из различных источников. SIMATIC IT Historian использует для этих целей функцию валидации (подтверждения), которая может быть применена к исходным данным и к собранным данным (по необходимости). Таким способом становится доступным стандартизованный вид производственных данных. После сбора данных происходит их привязка к контексту, что позволяет отслеживать и обновлять важные связи между данными и важнейшими процессами производства. По этой причине, физически сохраняются данные, связанные с производственным заданием, оборудованием, персоналом и т.д. Таким способом они могут быть вызваны в SIMATIC IT Historian с помощью контекстной информации, такой как номер производственного задания, номер устройства и т. д. 9.27.6.5 SIMATIC IT Unilab Заказные данные Заказной № 6BQ3075-2AA00-0BA0 6BQ3075-2AA10-0BA0 SIFLIULSU30601 6BQ3075-2AA20-0BA0 SIFLIULSU60601 Описание Мин. Вес Дост зак. (кг) авка (шт) SIMATIC IT UNILAB V6.1 BASIC SERVER, БАЗОВЫЙ СЕРВЕР СИСТЕМЫ УПРАВЛЕНИЯ ИНФОРМАЦИЕЙ ДЛЯ ЛАБОРАТОРИЙ, НОСИТЕЛЬ ДАННЫХ, ЛИЦЕНЗИЯ НА 1 УСТАНОВКУ, CD, SWCLASS A, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМОЕ 6-8 0 неде ль 1 SIMATIC IT UNILAB V6.1 ADVANCED SERVER, СТАНДАРТНЫЙ СЕРВЕР СИСТЕМЫ УПРАВЛЕНИЯ ИНФОРМАЦИЕЙ ДЛЯ ЛАБОРАТОРИЙ, НОСИТЕЛЬ ДАННЫХ, ЛИЦЕНЗИЯ НА 1 УСТАНОВКУ, CD, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМОЕ 6-8 0 неде ль 1 SIMATIC IT UNILAB V6.1 ADVANCED SERVER, ПРОДВИНУТЫЙ СЕРВЕР СИСТЕМЫ УПРАВЛЕНИЯ ИНФОРМАЦИЕЙ 6-8 0 неде ль 1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 329 ДЛЯ ЛАБОРАТОРИЙ, НОСИТЕЛЬ ДАННЫХ, ЛИЦЕНЗИЯ НА 1 УСТАНОВКУ, CD, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМОЕ SIMATIC IT UNILAB V6.1 1 CONCURRENT CLIENT, 1 ОДНОВРЕМЕННЫЙ КЛИЕНТ СИСТЕМЫ УПРАВЛЕНИЯ ИНФОРМАЦИЕЙ ДЛЯ ЛАБОРАТОРИЙ, БЕЗ НОСИТЕЛЯ ДАННЫХ, ЛИЦЕНЗИЯ НА 1 УСТАНОВКУ, CD, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМОЕ 6-8 0 неде ль 1 SIMATIC IT UNILAB V6.1 10 CONCURRENT CLIENT, 10 ОДНОВРЕМЕННЫХ КЛИЕНТОВ СИСТЕМЫ УПРАВЛЕНИЯ ИНФОРМАЦИЕЙ ДЛЯ ЛАБОРАТОРИЙ, БЕЗ НОСИТЕЛЯ ДАННЫХ, ЛИЦЕНЗИЯ НА 1 УСТАНОВКУ, CD, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМОЕ 6-8 0 неде ль 1 SIMATIC IT UNILAB V6.1 25 CONCURRENT CLIENT, 25 ОДНОВРЕМЕННЫХ КЛИЕНТОВ СИСТЕМЫ УПРАВЛЕНИЯ ИНФОРМАЦИЕЙ ДЛЯ ЛАБОРАТОРИЙ, БЕЗ НОСИТЕЛЯ ДАННЫХ, ЛИЦЕНЗИЯ НА 1 УСТАНОВКУ, CD, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМОЕ 6-8 0 неде ль 1 6BQ3075-2AA60-0BA0 SIMATIC IT UNILAB V6.1 SAP-QM INTERFACE, ИНТЕРФЕЙС К SAP-QM ДЛЯ СИСТЕМЫ УПРАВЛЕНИЯ ИНФОРМАЦИЕЙ ДЛЯ ЛАБОРАТОРИЙ, НОСИТЕЛЬ ДАННЫХ, ЛИЦЕНЗИЯ НА 1 УСТАНОВКУ, CD, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМОЕ 4-5 0 неде ль 1 6BQ3075-2AA70-0BX0 SIMATIC IT UNILAB V6.1 VALIDATION PACK, ПАКЕТ ПОДТВЕРЖДЕНИЯ ДЕЙСТВИЙ ДЛЯ СИСТЕМЫ УПРАВЛЕНИЯ ИНФОРМАЦИЕЙ ДЛЯ ЛАБОРАТОРИЙ, БЕЗ НОСИТЕЛЯ ДАННЫХ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 УСТАНОВКУ, CD, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ 4-5 0 неде ль 1 6BQ3075-2AA38-0BB0 6BQ3075-2AA48-0BB0 6BQ3075-2AA58-0BB0 SIFLIRMC020603 SIFLIULCU70601 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 330 EKB Installer SIMATIC IT UNILAB V6.1 VALIDATION PACK, ПАКЕТ ПОДТВЕРЖДЕНИЯ ДЕЙСТВИЙ ДЛЯ СИСТЕМЫ УПРАВЛЕНИЯ ИНФОРМАЦИЕЙ ДЛЯ ЛАБОРАТОРИЙ, БЕЗ НОСИТЕЛЯ ДАННЫХ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 УСТАНОВКУ, CD, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ 4-5 0 неде ль 1 SIMATIC IT UNILAB V6.1POCKET PC (OFFLINE), ПАКЕТ ДЛЯ КПК НА ПЛАТФОРМЕ POCKET PC ДЛЯ СИСТЕМЫ УПРАВЛЕНИЯ ИНФОРМАЦИЕЙ ДЛЯ ЛАБОРАТОРИЙ (НЕ ОПЕРАТИВНЫЕ ДАННЫЕ), БЕЗ НОСИТЕЛЯ ДАННЫХ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 УСТАНОВКУ, CD, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМОЕ 6-8 0 неде ль 1 6BQ3075-2AB18-0BD0 SIMATIC IT UNILAB V6.1 POWERPACK BASIC - STANDARD, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ СИСТЕМЫ УПРАВЛЕНИЯ ИНФОРМАЦИЕЙ ДЛЯ ЛАБОРАТОРИЙ ОТ BASIC ДО STANDARD, БЕЗ НОСИТЕЛЯ ДАННЫХ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 УСТАНОВКУ, CD, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМО 4-5 0 неде ль 1 6BQ3075-2AB28-0BD0 SIMATIC IT UNILAB V6.1 POWERPACK STANDARD - ADVANCED, РАСШИРЕНИЕ ФУНКЦИОНАЛЬНЫХ ВОЗМОЖНОСТЕЙ СИСТЕМЫ УПРАВЛЕНИЯ ИНФОРМАЦИЕЙ ДЛЯ ЛАБОРАТОРИЙ ОТ STANDARD ДО ADVANCED, БЕЗ НОСИТЕЛЯ ДАННЫХ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 УСТАНОВКУ, CD, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PCСОВМ 4-5 0 неде ль 1 6BQ3075-2AA88-0BB0 6BQ3075-2AB08-0BB0 SIFLIUPPU00601 9.27.6.6 SIMATIC IT Unilab SIMATIC IT Unilab – Система управления лабораторной информацией - это проверенная временем и одобренная в промышленном применении LIMS (Laboratory Information Management System - система управления лабораторной информацией). © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 331 SIMATIC IT Unilab позволяет организовать решение критических вопросов в лабораторных коммуникациях и обслуживании пользователей, делая их легче и быстрее, благодаря распределению информации как между внутренними, так и между внешними пользователями. Система SIMATIC IT Unilab была разработан для управления лабораторным потоками работ и документов и оптимизирует сбор, анализ, возврат и отчетность лабораторных данных, также предлагая поддержку совместимости с 21 CFR 11. SIMATIC IT Unilab предлагает наилучшее решение по поддержке в случае исключительных ситуаций связанных с качеством. Она сокращает временные циклы и количество ошибок при подготовке образцов и обеспечивает анализ результатов, уменьшая отбраковку и повтор работ и сокращая стоимость качественной системы. SIMATIC IT Unilab это модульная система, которая может быть сконфигурована в соответствии со специфическими нуждами каждой конкретной лаборатории. Доступны как клиент-серверная, так и Web-версия системы. SIMATIC IT Unilab может быть реализована как отдельное решение или как часть SIMATIC IT. Область применения SIMATIC IT Unilab – это система управления лабораторной информацией (LIMS Laboratory Information Management System), которая испытывалась и тестировалась в течении долгого времени и вновь и в новь доказывает свою эффективность для промышленного применения. SIMATIC IT Unilab позволяет организациям ь решать критически важные проблемы, связанные с лабораторным обменом данными и обслуживанием пользователей. Система была разработана не только для управления рабочими потоками в лабораториях и для оптимизации сбора, анализа, обращения и отчетности по лабораторным данным, но и для того чтобы одновременно облегчить организацию процесса в соответствии со стандартом 21 CFR 11. Дополнительно, система SIMATIC IT Unilab позволяет улучшить процесс принятия решений в соответствии с отклонениями качества. Дизайн SIMATIC IT Unilab –это модульная система, которая может быть сконфигурирована в соответствии с насущными требованиями и, таким образом, приспособлена к специфическим требованиям каждой лаборатории. Она доступна в клиент-серверной версии и в web-версии. SIMATIC IT Unilab может быть использована как независимое решение, так и как часть SIMATIC IT. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 332 EKB Installer Функции Система SIMATIC IT Unilab упрощает и ускоряет доступ к информации и данным, совместно используемыми внутренними и внешними клиентами. Система сокращает временные циклы и количество ошибок при подготовке образцов и обеспечивает анализ результатов, уменьшая отбраковку, рационально используя капиталовложения и минимизируя издержки на систему поддержания качества. 9.27.6.7 SIMATIC IT Interspec Заказные данные http://www.aqad.ru/index.php? tree=1000000&tree2=9990284&tree3=10001340&tree4=10024781&tree5=10024787 Заказной № Описание Мин. Вес Дост зак. (кг) авка (шт) SIMATIC IT INTERSPEC V6.1, СТАНДАРТНЫЙ СЕРВЕР, ПРОГР.ОБЕСПЕЧЕНИЕ ДЛЯ УПРАВЛЕНИЯ СПЕЦИФИКАЦИЯМИ ПРОДУКТОВ И МАТЕРИАЛОВ, НОСИТЕЛЬ 6BQ3050-2AA03-0CA0 ДАННЫХ, ЛИЦЕНЗИЯ НА ОДНУ УСТАНОВКУ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСПЕЧЕНИЕ НА CD, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ 4-5 0 неде ль 1 SIMATIC IT INTERSPEC V6.1, ПРОДВИНУТЫЙ СЕРВЕР, ПРОГР.ОБЕСПЕЧЕНИЕ ДЛЯ УПРАВЛЕНИЯ СПЕЦИФИКАЦИЯМИ ПРОДУКТОВ И МАТЕРИАЛОВ, НОСИТЕЛЬ 6BQ3050-2AA13-0CA0 ДАННЫХ, ЛИЦЕНЗИЯ НА ОДНУ УСТАНОВКУ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСПЕЧЕНИЕ НА CD, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ 4-5 0 неде ль 1 SIMATIC IT INTERSPEC V6.1, ПОЛНОПРАВНЫЙ ПОЛЬЗОВАТЕЛЬ, ПРОГР.ОБЕСПЕЧЕНИЕ ДЛЯ УПРАВЛЕНИЯ СПЕЦИФИКАЦИЯМИ ПРОДУКТОВ И 6BQ3050-2AA22-0CB0 МАТЕРИАЛОВ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, БЕЗ НОСИТЕЛЯ ДАННЫХ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСПЕЧЕНИЕ, SWCLASS A, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМОЕ 6-8 0 неде ль 1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 333 SIMATIC IT INTERSPEC V6.1, 10 ОДНОВРЕМЕННЫХ ПОЛНОПРАВНЫХ ПОЛЬЗОВАТЕЛЕЙ, ПРОГР.ОБЕСПЕЧЕНИЕ ДЛЯ УПРАВЛЕНИЯ СПЕЦИФИКАЦИЯМИ 6BQ3050-2AA32-0CB0 ПРОДУКТОВ И МАТЕРИАЛОВ, ТОЛЬКО ЛИЦЕНЗИЯ НА 10 ПОЛЬЗОВАТЕЛЕЙ, БЕЗ НОСИТЕЛЯ ДАННЫХ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСПЕЧЕНИЕ, SW-CLASS A, МНОГОЯЗЫЧ 3-4 0 неде ли 1 SIMATIC IT INTERSPEC V6.1, 25 ОДНОВРЕМЕННЫХ ПОЛНОПРАВНЫХ ПОЛЬЗОВАТЕЛЕЙ, ПРОГР.ОБЕСПЕЧЕНИЕ 6BQ3050-2AA42-0CB0 ДЛЯ УПРАВЛЕНИЯ СПЕЦИФИКАЦИЯМИ ПРОДУКТОВ И МАТЕРИАЛОВ, ТОЛЬКО ЛИЦЕНЗИЯ НА 25 ПОЛЬЗОВАТЕЛЕЙ, БЕЗ НОСИТЕЛЯ ДАННЫХ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСПЕЧЕНИЕ, SW-CLASS A, МНОГОЯЗЫЧ 4-5 0 неде ль 1 SIMATIC IT INTERSPEC V6.1, ИНФОПОЛЬЗОВАТЕЛЬ, ПРОГР.ОБЕСПЕЧЕНИЕ ДЛЯ УПРАВЛЕНИЯ СПЕЦИФИКАЦИЯМИ ПРОДУКТОВ И МАТЕРИАЛОВ, ТОЛЬКО 6BQ3050-2AA52-0CB0 ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, БЕЗ НОСИТЕЛЯ ДАННЫХ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСПЕЧЕНИЕ, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ 4-5 0 неде ль 1 SIMATIC IT INTERSPEC V6.1, 10 ИНФОПОЛНОПРАВНЫХ ПОЛЬЗОВАТЕЛЕЙ, ПРОГР.ОБЕСПЕЧЕНИЕ ДЛЯ УПРАВЛЕНИЯ СПЕЦИФИКАЦИЯМИ ПРОДУКТОВ И 6BQ3050-2AA62-0CB0 МАТЕРИАЛОВ, ТОЛЬКО ЛИЦЕНЗИЯ НА 10 ПОЛЬЗОВАТЕЛЕЙ, БЕЗ НОСИТЕЛЯ ДАННЫХ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСПЕЧЕНИЕ, SWCLASS A, МНОГОЯЗЫЧНОЕ, PC-С 4-5 0 неде ль 1 SIMATIC IT INTERSPEC V6.1, 25 ОДНОВРЕМЕННЫХ ИНФОПОЛЬЗОВАТЕЛЕЙ, ПРОГР.ОБЕСПЕЧЕНИЕ 6BQ3050-2AA72-0CB0 ДЛЯ УПРАВЛЕНИЯ СПЕЦИФИКАЦИЯМИ ПРОДУКТОВ И МАТЕРИАЛОВ, ТОЛЬКО ЛИЦЕНЗИЯ НА 25 ПОЛЬЗОВАТЕЛЕЙ, БЕЗ 4-5 0 неде ль 1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 334 EKB Installer НОСИТЕЛЯ ДАННЫХ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСПЕЧЕНИЕ, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PCSIMATIC IT INTERSPEC V6.1, ПАКЕТ ПОДКЛЮЧЕНИЯ К ERP, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, БЕЗ НОСИТЕЛЯ 6BQ3050-2AA88-0CB0 ДАННЫХ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСПЕЧЕНИЕ, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ 4-5 0 неде ль 1 SIMATIC IT INTERSPEC V6.1, ПАКЕТ ВАЛИДАЦИИ, ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, БЕЗ НОСИТЕЛЯ ДАННЫХ, 6BQ3050-2AB02-0CB0 ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСПЕЧЕНИЕ, SWCLASS A, МНОГОЯЗЫЧНОЕ, PCСОВМЕСТИМОЕ по 0 запр осу 1 SIMATIC IT INTERSPEC V6.1 FULL USER, "ПОЛНОПРАВНЫЙ ПОЛЬЗОВАТЕЛЬ", БАЗОВЫЙ ПРОДУКТ, ДО 100 ОДНОВРЕМЕННЫХ ПОЛЬЗОВАТЕЛЕЙ, 6BQ3050-2AB12-0CB0 ТОЛЬКО ЛИЦЕНЗИЯ НА ОДНУ УСТАНОВКУ, ДЛЯ 500 ПОЛЬЗОВАТЕЛЕЙ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧЕНИЕ, БЕЗ НОСИТЕЛЕЙ ДАННЫХ, SW-CLASS A, МНОГОЯЗЫЧНО по 0 запр осу 1 SIMATIC IT INTERSPEC V6.1 FULL USER, "ПОЛНОПРАВНЫЙ ПОЛЬЗОВАТЕЛЬ", БАЗОВЫЙ ПРОДУКТ, ДО 500 ОДНОВРЕМЕННЫХ ПОЛЬЗОВАТЕЛЕЙ, 6BQ3050-2AB22-0CB0 ТОЛЬКО ЛИЦЕНЗИЯ НА ОДНУ УСТАНОВКУ, ДЛЯ 500 ПОЛЬЗОВАТЕЛЕЙ, ИСПОЛНЯЕМОЕ ПРОГР. ОБЕСПЕЧЕНИЕ, БЕЗ НОСИТЕЛЕЙ ДАННЫХ, SW-CLASS A, МНОГОЯЗЫЧНО по 0 запр осу 1 РАСШИРЕНИЕ ВОЗМОЖНОСТЕЙ SIMATIC IT INTERSPEC V6.1, ОТ СТАНДАРТНОГО СЕРВЕРА ДО ПРОДВИНУТОГО СЕРВЕРА, 6BQ3050-2AC02-0CB0 ТОЛЬКО ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, БЕЗ НОСИТЕЛЯ ДАННЫХ, ИСПОЛНЯЕМОЕ ПРОГ. ОБЕСПЕЧЕНИЕ, SW-CLASS A, МНОГОЯЗЫЧНОЕ, PC-СОВМЕСТИМОЕ 4-5 0 неде ль 1 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 335 9.27.6.8 SIMATIC IT Interspec SIMATIC IT Interspec – система управления спецификациями помогает пользователям управлять и формировать спецификации продуктов для сырья, полуфабрикатов и готовой продукции, а также для упаковочных материалов. Формирование спецификаций происходит как на уровне всей компании, так и на уровне установки. Распределять информацию по всей компании и по различным её отделам (закупок, продаж, логистики, производства, контроля качества) ясным, лёгким и контролируемым путём очень легко с помощью SIMATIC IT Interspec.Для всех производственных данных это единая опорная точка. SIMATIC IT Interspec повышает гибкость производства, позволяя гармонизируя спецификацию продуктов для глобальных компаний, сокращая время выхода на рынок новых продуктов и поддерживая более эффективные стратегии закупок, такие как глобальное приобретение. SIMATIC IT Interspec доступна как отдельное решение или как часть SIMATIC IT. Особенности SIMATI IT Interspec увеличивает гибкость производства; позволяет глобальным компаниям гармонизировать свои спецификации продукции; уменьшает время выхода нового продукта на рынок и; обеспечивает более эффективные закупочные стратегии, как, например, всемирные закупки. Область применения SIMATIC IT Interspec – система управления спецификациями помогает компаниям управлять и формировать спецификации продуктов для сырья, полуфабрикатов и готовой продукции, а также для упаковочных материалов. Формирование спецификаций происходит как на уровне всей компании, так и на уровне установки. SIMATIC IT Interspec позволяет легко и точно контролировать информационные потоки во всей компании и в её различных отделах (закупок, продаж, логистики, производства, контроля качества). Это делает все данные продукции доступными из единого источника. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 336 EKB Installer SIMATIC IT Interspec доступна как отдельное решение или как часть SIMATIC IT. 9.28 SIMOCODE ES SIMOCODE ES is the central software for parameterization, configuration and diagnostics of SIMOCODE pro. Two versions are offered: SIMOCODE ES Professional for connection to one or more devices via PROFIBUS DP or direct on the device via the system interface SIMOCODE ES Smart for direct connection to SIMOCODE pro via the system interface on the device With SIMOCODE ES Professional, SIMOCODE pro is parameterized and diag- nosed either direct on the device or from a central location over PROFIBUS DP. By displaying all operating, service and diagnostics data, SIMOCODE ES Professional provides meaningful information and thus helps to prevent faults or to quickly locate and correct them. The option of online parameterization during operation avoids additional plant downtimes. 'Win-SIMOCODE-DP/ Smart V1.3 and Win-SIMOCODE-DP/ Professional V1.3 Serial number: 20834-0001-000133 http://support.automation.siemens.com/WW/view/en/27043399 SIMOCODE ES Professional 2004 Serial number: 20844-0001-000133 http://support.automation.siemens.com/WW/view/en/22122327 SIMOCODE ES Professional 2007 http://support.automation.siemens.com/WW/view/de/28368473 850 SCOESP20 SIFLSCOESP020 SIMOCODE ES 2007 Premium 0 v2.0 851 SCOESS20 SIFLSCOESS020 SIMOCODE ES 2007 Standard 0 v2.0 852 SCOESB2 0 v2.0 853 SCOEST20 SIFLSCOEST020 SIMOCODE ES 2007 Premium Trial 0 SIFLSCOESB020 SIMOCODE ES 2007 Basic 0 v2.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 9.29 SIMOTION Scout Simotion Scout Short name Long name License name Version 1538 A2SCOU43 SIFLA2SCOU0403 SIMOTION Scout V4.3 v4.3 1393 A2SCOU42 SIFLA2SCOU0402 SIMOTION Scout V4.2 v4.2 766 A2SCOU41 SIFLA2SCOU0401 SIMOTION Scout V4.1 v4.1 765 A2CAMT22 SIFLA2CAMT0202 SIMOTION CamTool v2.2 334 A2SCOU40 SIFLA2SCOU0400 SIMOTION Scout V4.0 v4.0 335 A2SCOU32 SIFLA2SCOU0302 SIMOTION Scout V3.2 v3.2 336 A2SCOU31 SIMOTION Scout V3.1 v3.1 337 A2SCOU30 SIMOTION Scout V3.0 v3.0 338 A2SCOU20 SIMOTION Scout V2.0 v2.0 339 A2CAMT21 SIMOTION CamTool V2.1 v2.1 340 A2CAMT20 SIMOTION CamTool V2.0 v2.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 337 338 9.30 EKB Installer Sinaut Sinaut Micro SC Serial number 0855-7035-6878 9.31 SINEMA SINEMA E 2006 Lean planning, simulation and configuration tool SINEMA E 2006 Lean includes the following functions for the engineering of IWLAN networks: © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 339 · Quotation phase · Easy to use Sales Wizard · Report for quotation creation · Planning, simulation and configuration · Planning and simulation of the WLAN infrastructure · Simultaneous configuration of device groups · Creation of a report with mounting instructions · Centralized identification, upload / download and change of device parameters · Report for the final documentation · Measures in the case of a problem You will find more information on the Website http://www.siemens.com/sinema 841 SNSIEL10 SISLSNSIEL0100 NET SINEMA E Lean 2006 v1.0 842 SNSIES10 SISLSNSIES0100 NET SINEMA E Standard 2006 v1.0 Compared to the Lean license, the standard license offers additional functions for recording, evaluating and visualizing the measured WLAN signals (site survey) as well as extended simulation and planning features (auto placement, contour display, saving/comparing simulations and extended filtering options). © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 340 9.32 EKB Installer SinuTrain SinuTrain training and programming: HMI 810D/840D/840Di can be separately ordered and SinuTrain JobShop can also be ordered as classroom license SinuTrain V06.03 Edition 2 (WIN XP mit Servicepack 1) Versionsdatum : 28.07.2004 Setup Key: 02105876-FD-S1-0441-302018903 Version : V06.03 Edition 4 (WIN XP mit Servicepack 3) Versionsdatum : 24.10.2008 HMI : V 06.03.23.00 Setup Key: 10549734-FD-A6-451-302410995 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 341 On our CNC4you homepage, you can download a free trial version at www.cnc4you.siemens.com http://www.cnc4you.siemens.com/cms/website.php?id=/de/cnc-downloads.htm http://www.cnc4you.siemens.com/root/img/pool/fachthemen/service-und-ausbildung/sinutrain/ SinuTrain_SINUMERIK_Operate_4.4_ED2.zip SIFLSNTRTX0404.ekb SinuTrain SINUMERIK Operate (Trial) SIFLSNTRBC0404.ekb SinuTrain SINUMERIK Operate (BASIC) SIFLSNTRSD0404.ekb SinuTrain SINUMERIK Operate (Student) SIFLSNTRSM0404.ekb SinuTrain SINUMERIK Operate (ShopMill) SIFLSNTRSS0404.ekb SinuTrain SINUMERIK Operate (ShopTurn+ShopMill) SIFLSNTRST0404.ekb SinuTrain SINUMERIK Operate (ShopTurn) SIFLSNTRSU0404.ekb SinuTrain SINUMERIK Operate (ShopTurn+ShopMill) Upgrade 9.33 SFC Short name Long name License name Version 615 A1SFCV70 SIFLA1SFCV0700 SFC-Visualization V7.0 v7.0 616 A1SFC_70 SIFLA1SFC_0700 SFC V7.0 v7.0 617 A1SFCT70 SIFLA1SFCT0700 SFC for TDC v7.0 363 A1SFCV61 SIFLA1SFCV0601 SFC-Visualization V6.1 v6.1 364 A1SFCV60 SIFLA1SFCV0600 SFC-Visualization V6.0 v6.0 365 A1SFCV05 SFC-Visualization V5.0 v5.x 366 A1SFCV04 SFC VISUAL V4 v4.x 367 A1SFCV03 SFC VISUAL V3 v3.x 368 A1SFCT61 SIFLA1SFCT0601 SFC for D7-SYS v6.1 369 A1SFC_61 SIFLA1SFC_0601 SFC V6.1 v6.1 370 A1SFC_60 SIFLA1SFC_0600 SFC V6.0 v6.0 371 A1SFC_05 SFC V5.0 v5.x 372 A1SFC_04 PCS7-Engineering Options V4.x v4.x 373 A1SFC_03 SFC V3.x v3.x © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 342 EKB Installer 9.34 SmartLabel Key A1SLAB20 S7-Smartlabel V2 for v2.0 and v2.1 Key SIFLA1SLAB0300 S7-Smartlabel V3 9.35 Telecontrol Server Basic Enter topic text here. TELECONTROL SERVER BASIC 064 9.36 9.37 SIFLTSB0640200 Teleservice 396 A1S7TS03 TeleService V3.x v3.x 395 A1S7TS05 TeleService V5.x v5.x 394 A1S7TS51 TeleService V5.1 v5.1 393 A1S7TS52 TeleService V5.2 v5.2 392 A1S7TS60 SIFLA1S7TS060 0 TeleService V6.0 v6.0 348 A1S7TS61 SIFLA1S7TS060 1 TeleService V6.1 v6.1 TIA Portal v10...v14 See TIA Portal folder for version from v10.0 (2009) to v14.0 (2017) © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 9.37.1 Step 7 Prof (2011) Step 7 Prof (2011) Select> Short name Long name License name Version 1297 S7PROF11 SIFLS7PROF1100 STEP 7 V11 Professional combo v11.0 1298 S7PROT11 SIFLS7PROT1100 STEP 7 V11 Professional v11.0 1299 S7BASC11 SIFLS7BASC1100 STEP 7 Basic V11 v11.0 1310 A1PLCS11 SIFLA1PLCS1100 S7-PLCSIM v11.0 1311 A1SCL_11 SIFLA1SCL_1100 S7-SCL v11.0 1312 A1S7GR11 SIFLA1S7GR1100 S7-GRAPH v11.0 9.37.2 WinCC Flexible (2011) WinCC Flexible (2011) © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 343 344 EKB Installer Select> Short name Long name License name Version 1300 A9XER111 SIFLA9XER11100 WinCC flexible V11 Advanced v11.0 1301 A9XEP111 SIFLA9XEP11100 WinCC flexible Advanced combo v11.0 1302 A9XES111 SIFLA9XES11100 WinCC Comfort combo v11.0 1303 A9XET111 SIFLA9XET11100 WinCC Comfort v11.0 1322 WCRCSP99 SIFLWCRCSP9999 WinCC Recipes for SIMATIC Panel v11 v99.9 1323 WCRT0111 SIFLWCRT021100 WinCC RT Advanced (128) v11.0 1324 WCRT0211 SIFLWCRT011100 WinCC RT Advanced (512) v11.0 1325 WCRT0311 SIFLWCRT031100 WinCC RT Advanced (2048) v11.0 1326 WCRT0411 SIFLWCRT041100 WinCC RT Advanced (4096) v11.0 1327 WCRT0611 SIFLWCRT061100 WinCC RT Advanced (8192) v11.0 1328 WCAUDP99 SIFLWCAUDP9999 WinCC Audit for SIMATIC Panel v11 v99.9 1316 WCSSRA99 SIFLWCSSRA9999 WinCC Sm@rtServer for RT Advanced v11 v99.9 1317 WCAURT99 SIFLWCAURT9999 WinCC Audit for RT Advanced v11 v99.9 1318 WCLORT99 SIFLWCLORT9999 WinCC Logging for RT Advanced v11 v99.9 1319 WCRCRT99 SIFLWCRCRT9999 WinCC Recipes for RT Advanced v11 v99.9 1396 WCOPRT99 SIFLWCOPRT9999 WinCC OPC Server for RT Advanced v99.9 1397 WCOPSP99 SIFLWCOPSP9999 WinCC OPC Server for Panels v99.9 1398 WCSAPA99 SIFLWCSAPA9999 WinCC Sm@rtAccess for Panels v99.9 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 345 1399 WCSART99 SIFLWCSART9999 WinCC OPC Server for RT Advanced v99.9 1400 WCSSPA99 SIFLWCSSPA9999 WinCC Sm@rtService for Panels v99.9 1401 WCSSRT99 SIFLWCSSRT9999 WinCC Sm@rtService for RT Advanced v99.9 1402 WCSSSP99 SIFLWCSSSP9999 WinCC Sm@rtServer for SIMATIC Panel v99.9 License name Version 9.37.3 WinCC Prof (2011) WinCC Prof (2011) Select> Short name Long name 1304 WCPRC211 SIFLWCPRC21100 WinCC Professional (max.) combo v11.0 1305 WCPRC311 SIFLWCPRC31100 WinCC Professional (512) combo v11.0 1306 WCPRC411 SIFLWCPRC41100 WinCC Professional (4096) combo v11.0 1307 WCPRO211 SIFLWCPRO21100 WinCC Professional (max.) v11.0 1308 WCPRO311 SIFLWCPRO31100 WinCC Professional (512) v11.0 1309 WCPRO411 SIFLWCPRO41100 WinCC Professional (4096) v11.0 1337 WCPRO511 SIFLWCPRO51100 WinCC Professional (8192) v11.0 1338 WCPRO611 SIFLWCPRO61100 WinCC Professional (65536) v11.0 1339 WCPRC511 SIFLWCPRC51100 WinCC Professional (8192) combo v11.0 1340 WCPRC611 SIFLWCPRC61100 WinCC Professional (65536) combo v11.0 1341 WCRP0211 SIFLWCRP021100 WinCC RT Professional (max.) v11.0 1342 WCRP0311 SIFLWCRP031100 WinCC RT Professional (512) v11.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 346 EKB Installer 1343 WCRP0411 SIFLWCRP041100 WinCC RT Professional (4096) v11.0 1344 WCRP0511 SIFLWCRP051100 WinCC RT Professional (8192) v11.0 1345 WCRP0611 SIFLWCRP061100 WinCC RT Professional (65536) v11.0 1346 WCRPC211 SIFLWCRPC21100 WinCC RT Professional (max.) combo v11.0 1347 WCRPC311 SIFLWCRPC31100 WinCC RT Professional (512) combo v11.0 1348 WCRPC411 SIFLWCRPC41100 WinCC RT Professional (4096) combo v11.0 1349 WCRPC511 SIFLWCRPC51100 WinCC RT Professional (8192) combo v11.0 1350 WCRPC611 SIFLWCRPC61100 WinCC RT Professional (65536) combo v11.0 1313 WCSRPR99 SIFLWCSRPR9999 WinCC Server for RT Professional v11 v99.9 1321 WCSSSP99 SIFLWCSSSP9999 1329 YWCPLG99 SIFCYWCPLG9999 WinCC Logging RT Professional (1500) 1 v99.9 1330 YWCPLG99 SIFCYWCPLG9999 WinCC Logging RT Professional (5000) 2 v99.9 1331 YWCPLG99 SIFCYWCPLG9999 WinCC Logging RT Professional (80000) v99.9 6 1332 YWCPLG99 SIFCYWCPLG9999 WinCC Logging RT Professional (10000) v99.9 5 1333 YWCPLG99 SIFCYWCPLG9999 WinCC Logging for RT Professional 4 (4000000) 1334 YWCPLG99 SIFCYWCPLG9999 WinCC Logging RT Professional (30000) v99.9 3 1358 WCRPC811 SIFLWCRPC81100 WinCC RT Professional (262144) combo v11.0 WinCC Sm@rtServer for SIMATIC Panel v99.9 v11 v99.9 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 1390 WCWDSR99 SIFLWCWDSR9999 WinCC WebDiagnostics Server for RT Professional v11 347 v99.9 9.37.4 Step 7 Safety (2011) Step 7 Safety (2011) Select> Short name Long name License name Version 1391 A1DSAV11 SIFLA1DSAV110 STEP 7 Safety Advanced combo v11 0 v11.0 1392 A1DSAT11 SIFLA1DSAT1100 STEP 7 Safety Advanced v11 v11.0 9.37.5 PID Professional v11 PID Professional v11 9.38 Select> Short name Long name License name Version 1539 A1PPRC11 SIFLA1PPRC1100 PID Professional combo V11.0 v11.0 1540 A1PPRO11 SIFLA1PPRO110 0 PID Professional V11.0 v11.0 1541 A1730111 SIFLA173011100 Modular PID Control V11.0 v11.0 1542 A1STDC11 SIFLA1STDC1100 Standard PID Control V11.0 v11.0 Soft Starter Soft Starter ES 2007 Premium http://support.automation.siemens.com/WW/view/en/28323168 http://support.automation.siemens.com/WW/llisapi.dll/csfetch/28323168/ Soft_Starter_ES_2007_Premium_Trialversion_Downloadfile.zip ( 203998 KB ) 846 SSTESP20 SIFLSSTESP020 0 Soft Starter ES 2007 Premium v2.0 847 SSTESS20 SIFLSSTESS020 0 Soft Starter ES 2007 Standard v2.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 348 EKB Installer 848 SSTESB20 SIFLSSTESB020 0 Soft Starter ES 2007 Basic v2.0 849 SSTEST20 SIFLSSTEST020 0 Soft Starter ES 2007 Premium Trial v2.0 Basic - Communication via serial device interface - Commissioning - Parameterization and operation Standard - Communication via serial device interface - Commissioning - Parameterization, operation and monitoring - Diagnostics - Trace function (oscilloscope function) Premium - Communication via serial device interface and optional Profibus interface - Commissioning - Parameterization, operation and monitoring (via serial device interface or via communication module Profibus) - Diagnostics - Trace function (oscilloscope function) - Group function 9.39 Visionscape Visionscape Software Version 3.7 use hardware Dongle key USB Dongle: 6GF3080-0VS00-2KS0 Parallel Port Dongle: 6GF3080-0VS00-1KS0 http://support.automation.siemens.com/WW/view/en/27196122 Typical Applications Dependent on system used please see applications for: PC-based system with analog frame grabbers 0300 or 0740 PC-based system with digital CamLink frame grabber 0800, including line scan © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 349 Intelligent Camera SIMATIC HawkEye 1600T Customer Benefits New ability to cover line scan and high-speed/high-resolution applications with proved and known SIMATIC Visionscape Software Enhance PC-based line with Intelligent Cameras: the same Machine Vision jobs can be used on frame grabbers as well as on an intelligent camera Ensured, tested cooperation of all components of a complete Machine Vision system due to extensive testing: software, frame grabber, cameras and PC Easier to use and to learn due one simplified engineering system FrontRunner, the simplified documentation, and the increased stability Complete offering out of one hand with competitive priced cameras and SIMATIC PCs 9.40 WinAC Key A1WINA40 WinAC Basis V4.0 for v4.0 and v4.1 A1WINA40 341 A1WRTX42 SIFLA1WRTX0402 WinAC Basis V4.0 and v4.1 WinAC RTX 4.2 (2005) v4.2 See PAC number for install RTX 9.41 A1WRTX4 SIFLA1WRTX04 4 04 WinAC RTX 4.4 (2008) 4.4 A1WINA4 SIFLA1WINA04 4 04 WinAC Basis 4.4 (2008) 4.4 A1WINA4 SIFLA1WIPN040 WinAC PN 4.4 (2008) 4 4 4.4 813 A1WRTX4 SIFLA1WRTX04 3 03 WinAC RTX 4.3 (2005 SP3) v4.3 814 A1WINA4 SIFLA1WINA04 3 03 WinAC Basis V4.3 v4.3 815 A1WIPN4 SIFLA1WIPN040 WinAC PN V4.3 3 3 v4.3 WinAC MP WinAC MP SoftPLC for MiltiPanel 844 WMP2774 SIFLWMP27704 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 WinAC MP 2007 (MP 277) v4.0 350 EKB Installer 0 00 845 WMP3774 SIFLWMP37704 0 00 WinAC MP 2008 Short name Long name 9.42 WinAC MP 2007 (MP 377) v4.0 License name Version 1128 WMP1774 SIFLWMP177040 WinAC MP 2008 (MP 177) 1 0 v4.1 1129 WMP2774 SIFLWMP277040 WinAC MP 2008 (MP 277) 1 1 v4.1 1130 WMP3774 SIFLWMP377040 WinAC MP 2008 (MP 377) 1 1 v4.1 WinCC v5.0... v7.7 See LogFiles in C:\Program Files\SIEMENS\WINCC\Diagnose for example License.Log when License key A9WRC installed 02/01/2007 13:16:50 InitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | NameForMessageBox = | Name of License = SIFLA9WRC70600 | Text of License = WinCC RC (262144) | 02/01/2007 13:16:50 InitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | NameForMessageBox = | Name of License = SIFLA9WRC70600 | Text of License = WinCC RC (262144) | 02/01/2007 13:17:07 InitLicense RT | AppName = OptRT:CHIPCARD | CycleCheck = no | NameForMessageBox = | Name of License = SIFLA1WPC40600 | Text of License = WinCC Chipcard | 02/01/2007 13:17:07 ExitLicense RT | AppName = OptRT:CHIPCARD | CycleCheck = no | Name of License = SIFLA1WPC40600 | Text of License = WinCC Chipcard | 02/01/2007 13:17:08 InitLicense CS | AppName = AppCS:TlgASO | CycleCheck = yes | NameForMessageBox = | Name of License = SIFLA9WTG30600 | Text of License = WINCC Archive (30000) | 02/01/2007 13:18:48 InitLicense xx | AppName = ConnectivityPack | CycleCheck = no | NameForMessageBox = | Name of License = SIFLA9WOP10600 | Text of License = WinCC Connectivity Pack | 02/01/2007 13:18:48 ExitLicense xx | AppName = ConnectivityPack | CycleCheck = no | Name of License = SIFLA9WOP10600 | Text of License = WinCC Connectivity Pack | © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 351 02/01/2007 13:30:15 ExitLicense CS | AppName = AppCS:TlgASO | CycleCheck = yes | Name of License = SIFLA9WTG30600 | Text of License = WINCC Archive (30000) | 02/01/2007 13:30:17 ExitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | Name of License = SIFLA9WRC70600 | Text of License = WinCC RC (262144) | 02/01/2007 13:30:17 ExitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | Name of License = SIFLA9WRC70600 | Text of License = WinCC RC (262144) | Example when installed 2 License key A9WRC. Low key with 128 tags block High key with 65536 tags Example License.Log when installed 2 License key A9WRC. 02/01/2007 14:39:29 InitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | NameForMessageBox = | Name of License = SIFLA9WRC10600 | Text of License = WinCC RC (128) | 02/01/2007 14:39:29 InitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | NameForMessageBox = | Name of License = SIFLA9WRC10600 | Text of License = WinCC RC (128) | ..... You need use only one key with max Tags Example License.Log when License key A9WRC not installed © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 352 EKB Installer for example Authorinformation.inf when License key A9WRC* not installed License installed needed to install Product SI--A9WRC?---No Yes Yes Simatic WinCC RC (Runtime + Development) SIFLA9WSN40600 Yes Yes No WebNavigator 50 Clients SIFLA9WOP10601 Yes No No WinCC Option Connectivity Pack SIFLA9WSPA0600 Yes No No ProAgent WinCC and part of License.Log when License key A9WRC* not installed 02/01/2007 14:10:20 Control Center - Demo Mode ConfigurationSystem enabled 02/01/2007 14:10:20 NoLicense CS | Name of License = A9WRC?0600 | Text of License = Simatic WinCC RC (Runtime + Development) | Exists = No | 02/01/2007 14:10:20 InitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | NameForMessageBox = | Name of License = A9WRC?0600 | Text of License = Simatic WinCC RC (Runtime + Development) | 02/01/2007 14:10:22 NoLicense ED | Name of License = A9WRC?0600 | Text of License = Simatic WinCC RC (Runtime + Development) | Exists = No | 02/01/2007 14:10:22 Control Center - Demo Mode Editors enabled 02/01/2007 14:10:22 InitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | NameForMessageBox = | Name of License = A9WRC?0600 | Text of License = Simatic WinCC RC (Runtime + Development) | ..... 9.42.1 WinCC v7.4 Install only 1 tags keys © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 9.42.2 WinCC v7.3 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 353 354 EKB Installer 9.42.3 WinCC v7.2 WinCC v7.2 (2013) 1635 A9WRP972 SIFLA9WRP90702 WinCC RT PO (unlimited) v7.2 1636 A9WRP872 SIFLA9WRP80702 WinCC RT PO (20000) v7.2 1637 A9WRP772 SIFLA9WRP70702 WinCC RT PO (10000) v7.2 1638 A9WRP672 SIFLA9WRP60702 WinCC RT PO (8500) v7.2 1639 A9WRP572 SIFLA9WRP50702 WinCC RT PO (5000) v7.2 1640 A9WRP472 SIFLA9WRP40702 WinCC RT PO (3000) v7.2 1641 A9WRP372 SIFLA9WRP30702 WinCC RT PO (2000) v7.2 1642 A9WRP272 SIFLA9WRP20702 WinCC RT PO (1000) v7.2 1643 A9WRP172 SIFLA9WRP10702 WinCC RT PO (250) v7.2 1644 A9WRP072 SIFLA9WRP00702 WinCC RT PO Client v7.2 1645 A9WARC72 SIFLA9WARC0702 WINCC User Archives v7.2 1646 A9WSRD72 SIFLA9WSRD0702 WINCC Redundancy v7.2 1647 A9WDS172 SIFLA9WDS10702 WINCC WebDiag Server v7.2 1648 A9WDC172 SIFLA9WDC10702 WINCC WebDiag Client v7.2 1649 A9WSN672 SIFLA9WSN60702 WINCC-V7 WebNavigator 150 Clients v7.2 1650 A9WSN572 SIFLA9WSN50702 WINCC-V7 WebNavigator 100 Clients v7.2 1651 A9WSN472 SIFLA9WSN40702 WINCC-V7 WebNavigator 50 Clients v7.2 1652 A9WSN372 SIFLA9WSN30702 WINCC-V7 WebNavigator 25 Clients v7.2 1653 A9WSN272 SIFLA9WSN20702 WINCC-V7 WebNavigator 10 Clients v7.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 355 1654 A9WSN872 SIFLA9WSN80702 WINCC-V7 WebNavigator 5 Clients v7.2 1655 A9WSN172 SIFLA9WSN10702 WINCC-V7 WebNavigator 3 Clients v7.2 1656 A9WSN772 SIFLA9WSN70702 WINCC-V7 WebNavigator 1 Clients v7.2 1657 A9WRTA72 SIFLA9WRTA0702 WINCC-V7 RT 1500K PTg 512 ATg v7.2 1658 A9WRT972 SIFLA9WRT90702 WINCC-V7 RT 500K PTg 512 ATg v7.2 1659 A9WRT872 SIFLA9WRT80702 WINCC-V7 RT 150K PTg 512 ATg v7.2 1660 A9WRT772 SIFLA9WRT70702 WINCC-V7 RT 256K PTg 512 ATg v7.2 1661 A9WRT672 SIFLA9WRT60702 WINCC-V7 RT 100K PTg 512 ATg v7.2 1662 A9WRT572 SIFLA9WRT50702 WINCC-V7 RT 8000 PTg 512 ATg v7.2 1663 A9WRT472 SIFLA9WRT40702 WINCC-V7 RT 64K PTg 512 ATg v7.2 1664 A9WRT372 SIFLA9WRT30702 WINCC-V7 RT 1024 PTg 512 ATg v7.2 1665 A9WRT272 SIFLA9WRT20702 WINCC-V7 RT 256 PTg 512 ATg v7.2 1666 A9WRT172 SIFLA9WRT10702 WINCC-V7 RT 128 PTg 512 ATg v7.2 1667 A9WRCA72 SIFLA9WRCA0702 WINCC-V7 RC 1500K PTg 512 ATg v7.2 1668 A9WRC972 SIFLA9WRC90702 WINCC-V7 RC 500K PTg 512 ATg v7.2 1669 A9WRC872 SIFLA9WRC80702 WINCC-V7 RC 150K PTg 512 ATg v7.2 1670 A9WRC772 SIFLA9WRC70702 WINCC-V7 RC 256K PTg 512 ATg v7.2 1671 A9WRC672 SIFLA9WRC60702 WINCC-V7 RC 100K PTg 512 ATg v7.2 1672 A9WRC572 SIFLA9WRC50702 WINCC-V7 RC 8000 PTg 512 ATg v7.2 1673 A9WRC472 SIFLA9WRC40702 WINCC-V7 RC 64K PTg 512 ATg v7.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 356 EKB Installer 1674 A9WRC372 SIFLA9WRC30702 WINCC-V7 RC 1024 PTg 512 ATg v7.2 1675 A9WRC272 SIFLA9WRC20702 WINCC-V7 RC 256 PTg 512 ATg v7.2 1676 A9WRC172 SIFLA9WRC10702 WINCC-V7 RC 128 PTg 512 ATg v7.2 1677 A9WVC672 SIFLA9WVC60702 WINCC-V7 WinCC Dat@M.150 Clients v7.2 1678 A9WVC572 SIFLA9WVC50702 WINCC-V7 WinCC Dat@M.100 Clients v7.2 1679 A9WVC472 SIFLA9WVC40702 WINCC-V7 WinCC Dat@M.50 Clients v7.2 1680 A9WVC372 SIFLA9WVC30702 WINCC-V7 WinCC Dat@M.25 Clients v7.2 1681 A9WVC272 SIFLA9WVC20702 WINCC-V7 WinCC Dat@M.10 Clients v7.2 1682 A9WVC172 SIFLA9WVC10702 WINCC-V7 WinCC Dat@M.3 Clients v7.2 1683 A9WVC072 SIFLA9WVC00702 WINCC-V7 WinCC Dat@M. 1 Clients v7.2 1684 A9WSPA72 SIFLA9WSPA0702 WINCC ProAgent WinCC v7.2 1685 A9WSP372 SIFLA9WSP30702 WINCC ProAgent 16 Clients v7.2 1686 A9WSP272 SIFLA9WSP20702 WINCC ProAgent 8 Clients v7.2 1687 A9WSP172 SIFLA9WSP10702 WINCC ProAgent 4 Clients v7.2 1688 A9WSEC72 SIFLA9WSEC0702 WINCC Server v7.2 1689 A9WOP172 SIFLA9WOP10702 WINCC-V7 Connectivity Pack v7.2 1690 A9ACC172 SIFLA9ACC10702 WinCC Audit ChangeControl RC v7.2 1691 A9ARC702 SIFLA9ARC10702 WINCC-V7 Audit RC v7.2 1692 A9ART172 SIFLA9ART10702 WINCC-V7 Audit RT v7.2 1693 A9WC1072 SIFLA9WC100702 WINCC Interf. S5-PMCH1 v7.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 357 1694 A9WC1172 SIFLA9WC110702 WINCC Interf. Applicom v7.2 1695 A9WC1272 SIFLA9WC120702 WINCC Interf. GE/SNP v7.2 1696 A9WC1372 SIFLA9WC130702 WINCC Interf. GE/Eth v7.2 1697 A9WC1472 SIFLA9WC140702 WINCC Interf. AB/DH v7.2 1698 A9WC1572 SIFLA9WC150702 WINCC Reserve #1 v7.2 1699 A9WC1672 SIFLA9WC160702 WINCC Reserve #2 v7.2 1700 A9WC1772 SIFLA9WC170702 WINCC Interf. S5TF/Eth v7.2 1701 A9WC1872 SIFLA9WC180702 WINCC Interf. S5SR/Eth v7.2 1702 A9WC1972 SIFLA9WC190702 WINCC Interf. 505/Eth v7.2 1703 A9WC2072 SIFLA9WC200702 WINCC Mitsubishi FX serial v7.2 1704 A9WC2172 SIFLA9WC210702 WINCC Mitsubishi MELSEC-A serial v7.2 1705 A9WC2272 SIFLA9WC220702 WINCC SIMADYN D-PMC Eth v7.2 1706 A9WC2372 SIFLA9WC230702 WINCC OMRON C-Series Host Link v7.2 1707 A9WC2472 SIFLA9WC240702 WINCC Profibus-DP v7.2 1708 A9WC2572 SIFLA9WC250702 WINCC Interf. 505 TCP/IP v7.2 1709 A9WCL572 SIFLA9WCL50702 WINCC Interf. AB/DF1 v7.2 1710 A9WCL672 SIFLA9WCL60702 WINCC Interf. Pro. FMS v7.2 1711 A9WCL772 SIFLA9WCL70702 WINCC Interf. S7-PMC v7.2 1712 A9WCL872 SIFLA9WCL80702 WINCC Interf. Mod ser. v7.2 1713 A9WCL972 SIFLA9WCL90702 WINCC Interf. S5-PMCL2 v7.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 358 EKB Installer 1714 A1WPC172 SIFLA1WPC10702 WINCC Basic Process Ctrl v7.2 1715 A1WPC272 SIFLA1WPC20702 WINCC Advanced Process Ctrl v7.2 1716 A1WPC372 SIFLA1WPC30702 WINCC Storage v7.2 1717 A1WPC472 SIFLA1WPC40702 WINCC Chipcard v7.2 1718 A1WPC572 SIFLA1WPC50702 WINCC Video v7.2 1719 A9WOIC72 SIFLA9WOIC0702 WINCC Internet Conn. v7.2 1720 A9WLB172 SIFLA9WLB10702 WINCC-V7 Load Balancing v7.2 1721 A9LB1072 SIFLA9LB100702 WINCC-V7 Load Balancing Step Up v7.2 1722 A9IDB472 SIFLA9IDB40702 WINCC-V7 Ind.DataBridge 10000 Tg v7.2 1723 A9IDB372 SIFLA9IDB30702 WINCC-V7 Ind.DataBridge 2048 Tg v7.2 1724 A9IDB272 SIFLA9IDB20702 WINCC-V7 Ind.DataBridge 512 Tg v7.2 1725 A9IDB172 SIFLA9IDB10702 WINCC-V7 Ind.DataBridge 128 Tg v7.2 1726 A9WCP972 SIFLA9WCP90702 WinCC ES PO (unlimited) v7.2 1727 A9WCP872 SIFLA9WCP80702 WINCC-V7 RC PO 20000 PTg 512 ATg v7.2 1728 A9WCP772 SIFLA9WCP70702 WINCC-V7 RC PO 10000 PTg 512 ATg v7.2 1729 A9WCP672 SIFLA9WCP60702 WINCC-V7 RC PO 8500 PTg 512 ATg v7.2 1730 A9WCP572 SIFLA9WCP50702 WINCC-V7 RC PO 5000 PTg 512 ATg v7.2 1731 A9WCP472 SIFLA9WCP40702 WINCC-V7 RC PO 2000 PTg 512 ATg v7.2 1732 A9WCP372 SIFLA9WCP30702 WinCC RC PO (2000) v7.2 1733 A9WCP272 SIFLA9WCP20702 WINCC-V7 RC PO 1000 PTg 512 ATg v7.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 359 1734 A9WCP172 SIFLA9WCP10702 WINCC-V7 RC PO 250 PTg 512 ATg v7.2 1735 A9WOP272 SIFLA9WOP20702 WinCC Option Connectivity Station v7.2 1736 A9WOP472 SIFLA9WOP40702 WinCC Option Connectivity Station v7.2 1737 A9WOP372 SIFLA9WOP30702 OpenPCS 7 Station / WinCC v7.2 979 SIFCY9WTGX99995 WINCC-V7 Arch 10000 ATg v99.9 980 SIFCY9WTGX07004 WINCC-V7 Arch 4G ATg UNLIM v7.0 981 SIFCY9WTGX99993 WINCC-V7 Arch 30000 ATg v99.9 982 SIFCY9WTGX99992 WINCC-V7 Arch 5000 ATg v99.9 983 SIFCY9WTGX99991 WINCC-V7 Arch 1500 ATg v99.9 1394 SIFLNSIEPG9999 NET Industrial Ethernet SOFTNET-S7 Basis v99.9 1395 SIFLNSIESL9999 NET Industrial Ethernet SOFTNET-S7 Lean v99.9 9.42.4 WinCC v7.0 The term Power Tag refers solely to process variables that have a process connection to a PLC SIMATIC WinCC system software V7.0 Runtime packages on DVD Language variants: G/E/F/I/S ; with license for: 128 PowerTags (RT 128) 512 PowerTags (RT 512) 2048 PowerTags (RT 2048) 8192 PowerTags (RT 8192) 65536 PowerTags (RT 65536) 102400 PowerTags (RT 102400) 153600 PowerTags (RT 153600) 262144 PowerTags (RT 262144) incl. 512 archive variables each Complete packages on DVD Language variants: G/E/F/I/S ; with license for: 128 PowerTags (RC 128) 512 PowerTags (RC 512) © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 6AV6381-2BC07-0AX0 6AV6381-2BD07-0AX0 6AV6381-2BE07-0AX0 6AV6381-2BH07-0AX0 6AV6381-2BF07-0AX0 6AV6381-2BJ07-0AX0 6AV6381-2BK07-0AX0 6AV6381-2BL07-0AX0 6AV6381-2BM07-0AX0 6AV6381-2BN07-0AX0 360 EKB Installer 2048 PowerTags (RC 2048) 8192 PowerTags (RC 8192) 65536 PowerTags (RC 65536) 102400 PowerTags (RC 102400) 153600 PowerTags (RC 153600) 262144 PowerTags (RC 262144) incl. 512 archive variables each SIMATIC WinCC V7.0 Archives with licenses for: 1500 archive variables 5000 archive variables 10000 archive variables 30000 archive variables 80000 archive variables 120000 archive variables Options for flexible system configurations WinCC/Server WinCC/CAS V7.0 (Central Archive Server) incl. 1500 archive tags 6AV6381-2BP07-0AX0 6AV6381-2BS07-0AX0 6AV6381-2BQ07-0AX0 6AV6381-2BT07-0AX0 6AV6381-2BU07-0AX0 6AV6381-2BV07-0AX0 6AV6371-1DQ17-0AX0 6AV6371-1DQ17-0BX0 6AV6371-1DQ17-0CX0 6AV6371-1DQ17-0EX0 6AV6371-1DQ17-0GX0 6AV6371-1DQ17-0JX0 6AV6371-1CA07-0AX0 6AV6371-1DQ17-0XX0 WinCC/WebNavigator V7.0 basic package (3 client licenses) 10 client licenses 25 client licenses 50 client licenses 6AV6371-1DH07-0AX0 6AV6371-1DH07-0BX0 6AV6371-1DH07-0CX0 6AV6371-1DH07-0DX0 WinCC/Web Load Balancing V7.0 Web Load Balancing (2 licenses) Web Load Balancing StepUp (2 licenses) 6AV6371-1DH07-0JX0 6AV6371-1DH07-0FJ0 Options to increase availability WinCC/Redundancy Options for IT and Business Integration WinCC/DataMonitor V7.0 1 client license 3 client licenses 10 client licenses 25 client licenses 50 client licenses 6AV6371-1CF07-0AX0 6AV6371-1DN07-0LX0 6AV6371-1DN07-0AX0 6AV6371-1DN07-0BX0 6AV6371-1DN07-0CX0 6AV6371-1DN07-0DX0 Options for SCADA expansions WinCC/User Archives V7.0 Options for individual system expansions WinCC/ConnectivityPack V7.0 WinCC/ConnectivityStation V7.0 6AV6371-1CB07-0AX0 6AV6371-1DR07-0AX0 6AV6371-1DR17-0AX0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list WinCC/IndustrialX V7.0 361 6AV6371-1EL17-0AX0 Required keys 9.42.4.1 WinCC_v7_list The term Power Tag refers solely to process variables that have a process connection to a PLC 965 A9ACC17 SIFLA9ACC1070 0 0 WinCC Audit ChangeControl RC v7.0 966 A9WRP97 SIFLA9WRP9070 0 0 WinCC RT PO (unlimited) v7.0 967 A9WRP87 SIFLA9WRP8070 0 0 WinCC RT PO (20000) v7.0 968 A9WRP77 SIFLA9WRP7070 0 0 WinCC RT PO (10000) v7.0 969 A9WRP67 SIFLA9WRP6070 0 0 WinCC RT PO (8500) v7.0 970 A9WRP57 SIFLA9WRP5070 0 0 WinCC RT PO (5000) v7.0 971 A9WRP47 SIFLA9WRP4070 0 0 WinCC RT PO (3000) v7.0 972 A9WRP37 SIFLA9WRP3070 WinCC RT PO (2000) v7.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 362 EKB Installer 965 A9ACC17 SIFLA9ACC1070 0 0 WinCC Audit ChangeControl RC v7.0 973 A9WRP27 SIFLA9WRP2070 0 0 WinCC RT PO (1000) v7.0 974 A9WRP17 SIFLA9WRP1070 0 0 WinCC RT PO (250) v7.0 975 A9WCP97 SIFLA9WCP9070 0 0 WinCC ES PO (unlimited) v7.0 976 A9WRP07 SIFLA9WRP0070 0 0 WinCC RT PO Client v7.0 977 A9WARC7 SIFLA9WARC070 WINCC User Archives 0 0 v7.0 978 Y9WTG67 SIFCY9WTGX07 0 006 WINCC-V7 Arch 80000 ATg v7.0 979 Y9WTG57 SIFCY9WTGX07 0 005 WINCC-V7 Arch 10000 ATg v7.0 980 Y9WTG47 SIFCY9WTGX07 0 004 WINCC-V7 Arch 4G ATg UNLIM v7.0 981 Y9WTG37 SIFCY9WTGX07 0 003 WINCC-V7 Arch 30000 ATg v7.0 982 Y9WTG27 SIFCY9WTGX07 0 002 WINCC-V7 Arch 5000 ATg v7.0 983 Y9WTG17 SIFCY9WTGX07 0 001 WINCC-V7 Arch 1500 ATg v7.0 0 0 984 A9WSRD7 SIFLA9WSRD070 WINCC Redundancy 0 0 v7.0 985 A9WDS17 SIFLA9WDS1070 0 0 WINCC WebDiag Server v7.0 986 A9WDC17 SIFLA9WDC1070 WINCC WebDiag Client 0 0 v7.0 987 A9WSN67 SIFLA9WSN6070 0 0 WINCC-V7 WebNavigator 150 Clients v7.0 988 A9WSN57 SIFLA9WSN5070 0 0 WINCC-V7 WebNavigator 100 Clients v7.0 989 A9WSN47 SIFLA9WSN4070 WINCC-V7 WebNavigator 50 Clients v7.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 965 A9ACC17 SIFLA9ACC1070 0 0 363 WinCC Audit ChangeControl RC v7.0 990 A9WSN37 SIFLA9WSN3070 0 0 WINCC-V7 WebNavigator 25 Clients v7.0 991 A9WSN27 SIFLA9WSN2070 0 0 WINCC-V7 WebNavigator 10 Clients v7.0 992 A9WSN17 SIFLA9WSN1070 0 0 WINCC-V7 WebNavigator 3 Clients v7.0 993 A9WRT87 SIFLA9WRT8070 0 0 WINCC-V7 RT 150K PTg 512 ATg v7.0 994 A9WRT77 SIFLA9WRT7070 0 0 WINCC-V7 RT 256K PTg 512 ATg v7.0 995 A9WRT67 SIFLA9WRT6070 0 0 WINCC-V7 RT 100K PTg 512 ATg v7.0 996 A9WRT57 SIFLA9WRT5070 0 0 WINCC-V7 RT 8000 PTg 512 ATg v7.0 997 A9WRT47 SIFLA9WRT4070 0 0 WINCC-V7 RT 64K PTg 512 ATg v7.0 998 A9WRT37 SIFLA9WRT3070 0 0 WINCC-V7 RT 1024 PTg 512 ATg v7.0 999 A9WRT27 SIFLA9WRT2070 0 0 WINCC-V7 RT 256 PTg 512 ATg v7.0 100 A9WRT17 SIFLA9WRT1070 0 0 0 WINCC-V7 RT 128 PTg 512 ATg v7.0 100 A9WRC87 SIFLA9WRC8070 1 0 0 WINCC-V7 RC 150K PTg 512 ATg v7.0 100 A9WRC77 SIFLA9WRC7070 2 0 0 WINCC-V7 RC 256K PTg 512 ATg v7.0 100 A9WRC67 SIFLA9WRC6070 3 0 0 WINCC-V7 RC 100K PTg 512 ATg v7.0 100 A9WRC57 SIFLA9WRC5070 4 0 0 WINCC-V7 RC 8000 PTg 512 ATg v7.0 100 A9WRC47 SIFLA9WRC4070 5 0 0 WINCC-V7 RC 64K PTg 512 ATg v7.0 100 A9WRC37 SIFLA9WRC3070 WINCC-V7 RC 1024 PTg 512 ATg v7.0 0 0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 364 EKB Installer 965 A9ACC17 SIFLA9ACC1070 0 0 WinCC Audit ChangeControl RC v7.0 100 A9WRC27 SIFLA9WRC2070 7 0 0 WINCC-V7 RC 256 PTg 512 ATg v7.0 100 A9WRC17 SIFLA9WRC1070 8 0 0 WINCC-V7 RC 128 PTg 512 ATg v7.0 6 0 0 100 A9WVC67 SIFLA9WVC6070 WINCC-V7 WinCC Dat@M.150 Clients 9 0 0 v7.0 101 A9WVC57 SIFLA9WVC5070 WINCC-V7 WinCC Dat@M.100 Clients 0 0 0 v7.0 101 A9WVC47 SIFLA9WVC4070 WINCC-V7 WinCC Dat@M.50 Clients 1 0 0 v7.0 101 A9WVC37 SIFLA9WVC3070 WINCC-V7 WinCC Dat@M.25 Clients 2 0 0 v7.0 101 A9WVC27 SIFLA9WVC2070 WINCC-V7 WinCC Dat@M.10 Clients 3 0 0 v7.0 101 A9WVC17 SIFLA9WVC1070 WINCC-V7 WinCC Dat@M.3 Clients 4 0 0 v7.0 101 A9WSPA7 SIFLA9WSPA070 5 0 0 WINCC ProAgent WinCC v7.0 101 A9WSP37 SIFLA9WSP3070 6 0 0 WINCC ProAgent 16 Clients v7.0 101 A9WSP27 SIFLA9WSP2070 7 0 0 WINCC ProAgent 8 Clients v7.0 101 A9WSP17 SIFLA9WSP1070 8 0 0 WINCC ProAgent 4 Clients v7.0 101 A9WSEC7 SIFLA9WSEC070 9 0 0 WINCC Server v7.0 102 A9WOP17 SIFLA9WOP1070 0 0 0 WINCC-V7 Connectivity Pack v7.0 102 A9IDB470 SIFLA9IDB40700 1 WINCC-V7 Ind.DataBridge 10000 Tg v7.0 102 A9ARC70 2 0 WINCC-V7 Audit RC v7.0 102 A9ART170 SIFLA9ART10700 WINCC-V7 Audit RT v7.0 SIFLA9ARC1070 0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 965 A9ACC17 SIFLA9ACC1070 0 0 365 WinCC Audit ChangeControl RC v7.0 102 A9WLB70 SIFLA9WLB1070 4 0 0 WINCC-V7 Load Balancing v7.0 102 A9WC107 SIFLA9WC10070 5 0 0 WINCC Interf. S5-PMCH1 v7.0 102 A9WC117 SIFLA9WC11070 6 0 0 WINCC Interf. Applicom v7.0 102 A9WC127 SIFLA9WC12070 7 0 0 WINCC Interf. GE/SNP v7.0 102 A9WC137 SIFLA9WC13070 8 0 0 WINCC Interf. GE/Eth v7.0 102 A9WC147 SIFLA9WC14070 9 0 0 WINCC Interf. AB/DH v7.0 103 A9WC157 SIFLA9WC15070 0 0 0 WINCC Reserve #1 v7.0 103 A9WC167 SIFLA9WC16070 1 0 0 WINCC Reserve #2 v7.0 103 A9WC177 SIFLA9WC17070 2 0 0 WINCC Interf. S5TF/Eth v7.0 103 A9WC187 SIFLA9WC18070 3 0 0 WINCC Interf. S5SR/Eth v7.0 103 A9WC197 SIFLA9WC19070 4 0 0 WINCC Interf. 505/Eth v7.0 103 A9WC207 SIFLA9WC20070 5 0 0 WINCC Mitsubishi FX serial v7.0 103 A9WC217 SIFLA9WC21070 6 0 0 WINCC Mitsubishi MELSEC-A serial v7.0 103 A9WC227 SIFLA9WC22070 7 0 0 WINCC SIMADYN D-PMC Eth v7.0 103 A9WC237 SIFLA9WC23070 8 0 0 WINCC OMRON C-Series Host Link v7.0 103 A9WC247 SIFLA9WC24070 9 0 0 WINCC Profibus-DP v7.0 104 A9WC257 SIFLA9WC25070 WINCC Interf. 505 TCP/IP v7.0 3 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 366 EKB Installer 965 A9ACC17 SIFLA9ACC1070 0 0 WinCC Audit ChangeControl RC v7.0 104 A9WCL57 SIFLA9WCL5070 1 0 0 WINCC Interf. AB/DF1 v7.0 104 A9WCL67 SIFLA9WCL6070 2 0 0 WINCC Interf. Pro. FMS v7.0 104 A9WCL77 SIFLA9WCL7070 3 0 0 WINCC Interf. S7-PMC v7.0 104 A9WCL87 SIFLA9WCL8070 4 0 0 WINCC Interf. Mod ser. v7.0 104 A9WCL97 SIFLA9WCL9070 5 0 0 WINCC Interf. S5-PMCL2 v7.0 104 A1WPC17 SIFLA1WPC1070 6 0 0 WINCC Basic Process Ctrl v7.0 104 A1WPC27 SIFLA1WPC2070 7 0 0 WINCC Advanced Process Ctrl v7.0 104 A1WPC37 SIFLA1WPC3070 8 0 0 WINCC Storage v7.0 104 A1WPC47 SIFLA1WPC4070 9 0 0 WINCC Chipcard v7.0 105 A1WPC57 SIFLA1WPC5070 0 0 0 WINCC Video v7.0 105 A9WOIC7 SIFLA9WOIC070 1 0 0 WINCC Internet Conn. v7.0 105 A9WLB17 SIFLA9WLB1070 2 0 0 WINCC-V7 Load Balancing v7.0 105 A9LB1070 SIFLA9LB100700 3 WINCC-V7 Load Balancing Step Up v7.0 105 A9IDB370 SIFLA9IDB30700 4 WINCC-V7 Ind.DataBridge 2048 Tg v7.0 105 A9IDB270 SIFLA9IDB20700 5 WINCC-V7 Ind.DataBridge 512 Tg v7.0 105 A9IDB170 SIFLA9IDB10700 6 WINCC-V7 Ind.DataBridge 128 Tg v7.0 105 A9WCP87 SIFLA9WCP8070 WINCC-V7 RC PO 20000 PTg 512 ATg v7.0 0 0 0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 965 A9ACC17 SIFLA9ACC1070 0 0 367 WinCC Audit ChangeControl RC v7.0 105 A9WCP77 SIFLA9WCP7070 8 0 0 WINCC-V7 RC PO 10000 PTg 512 ATg v7.0 105 A9WCP67 SIFLA9WCP6070 9 0 0 WINCC-V7 RC PO 8500 PTg 512 ATg v7.0 106 A9WCP57 SIFLA9WCP5070 0 0 0 WINCC-V7 RC PO 5000 PTg 512 ATg v7.0 106 A9WCP47 SIFLA9WCP4070 1 0 0 WINCC-V7 RC PO 2000 PTg 512 ATg v7.0 106 A9WCP37 SIFLA9WCP3070 2 0 0 WinCC RC PO (2000) v7.0 106 A9WCP27 SIFLA9WCP2070 3 0 0 WINCC-V7 RC PO 1000 PTg 512 ATg v7.0 106 A9WCP17 SIFLA9WCP1070 4 0 0 WINCC-V7 RC PO 250 PTg 512 ATg v7.0 106 A9WOP27 SIFLA9WOP2070 5 0 0 WinCC Option Connectivity Station v7.0 106 A9WOP47 SIFLA9WOP4070 6 0 0 WinCC Option Connectivity Station v7.0 106 A9WOP37 SIFLA9WOP3070 7 0 0 OpenPCS 7 Station / WinCC v7.0 106 Y9WTG77 SIFCY9WTGX07 8 0 007 WINCC-V7 Arch 120000 ATg v7.0 7 0 0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 368 EKB Installer 9.42.5 WinCC v6.2 For some programs (in particular WinCC and WebNavigator) from a diskette it is possible to install only SISLA keys. On what that to reason SIFLA* keys are ignored at installation - their names are rigidly hammered in Setup. Only 1 Tags key must be installed. С дискеты можно инсталлировать только SISLA ключи 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 A9WARC62 A9WTG662 A9WTG562 A9WTG462 A9WTG362 A9WTG262 A9WTG162 A9WSRD62 A9WDS162 A9WDC162 A9WSN662 A9WSN562 A9WSN462 A9WSN362 A9WSN262 A9WSN162 A9WRT862 A9WRT762 A9WRT662 A9WRT562 A9WRT462 SIFLA9WARC0602 SIFCY9WTGX06026 SIFCY9WTGX06025 SIFCY9WTGX06024 SIFCY9WTGX06023 SIFCY9WTGX06022 SIFCY9WTGX06021 SIFLA9WSRD0602 SIFLA9WDS10602 SIFLA9WDC10602 SIFLA9WSN60602 SIFLA9WSN50602 SIFLA9WSN40602 SIFLA9WSN30602 SIFLA9WSN20602 SIFLA9WSN10602 SIFLA9WRT80602 SIFLA9WRT70602 SIFLA9WRT60602 SIFLA9WRT50602 SIFLA9WRT40602 WINCC User Archives WINCC-V6 Arch 120000 ATg WINCC-V6 Arch 80000 ATg WINCC-V6 Arch 4G ATg UNLIM WINCC-V6 Arch 30000 ATg WINCC-V6 Arch 5000 ATg WINCC-V6 Arch 1500 ATg WINCC Redundancy WINCC WebDiag Server WINCC WebDiag Client WINCC-V6.2 WebNavigator 150 Clients WINCC-V6.2 WebNavigator 100 Clients WINCC-V6.2 WebNavigator 50 Clients WINCC-V6.2 WebNavigator 25 Clients WINCC-V6.2 WebNavigator 10 Clients WINCC-V6.2 WebNavigator 3 Clients WINCC-V6 RT 150K PTg 512 ATg WINCC-V6 RT 256K PTg 512 ATg WINCC-V6 RT 100K PTg 512 ATg WINCC-V6 RT 8000 PTg 512 ATg WINCC-V6 RT 64K PTg 512 ATg v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 A9WRT362 A9WRT262 A9WRT162 A9WRC862 A9WRC762 A9WRC662 A9WRC562 A9WRC462 A9WRC362 A9WRC262 A9WRC162 A9WVC662 A9WVC562 A9WVC462 A9WVC362 A9WVC262 A9WVC162 A9WSPA62 A9WSP362 A9WSP262 A9WSP162 A9WSEC62 A9WOP162 A9WC1062 A9WC1162 A9WC1262 A9WC1362 A9WC1462 A9WC1562 A9WC1662 A9WC1762 A9WC1862 A9WC1962 A9WC2062 A9WC2162 A9WC2262 A9WC2362 A9WC2462 A9WC2562 A9WCL562 A9WCL662 A9WCL762 A9WCL862 A9WCL962 A1WPC162 A1WPC262 A1WPC362 A1WPC462 A1WPC562 A9WOIC62 A9WLB162 A9LB1062 A9ARC162 A9ART162 A9IDB462 A9IDB362 SIFLA9WRT30602 SIFLA9WRT20602 SIFLA9WRT10602 SIFLA9WRC80602 SIFLA9WRC70602 SIFLA9WRC60602 SIFLA9WRC50602 SIFLA9WRC40602 SIFLA9WRC30602 SIFLA9WRC20602 SIFLA9WRC10602 SIFLA9WVC60602 SIFLA9WVC50602 SIFLA9WVC40602 SIFLA9WVC30602 SIFLA9WVC20602 SIFLA9WVC10602 SIFLA9WSPA0602 SIFLA9WSP30602 SIFLA9WSP20602 SIFLA9WSP10602 SIFLA9WSEC0602 SIFLA9WOP10602 SIFLA9WC100602 SIFLA9WC110602 SIFLA9WC120602 SIFLA9WC130602 SIFLA9WC140602 SIFLA9WC150602 SIFLA9WC160602 SIFLA9WC170602 SIFLA9WC180602 SIFLA9WC190602 SIFLA9WC200602 SIFLA9WC210602 SIFLA9WC220602 SIFLA9WC230602 SIFLA9WC240602 SIFLA9WC250602 SIFLA9WCL50602 SIFLA9WCL60602 SIFLA9WCL70602 SIFLA9WCL80602 SIFLA9WCL90602 SIFLA1WPC10602 SIFLA1WPC20602 SIFLA1WPC30602 SIFLA1WPC40602 SIFLA1WPC50602 SIFLA9WOIC0602 SIFLA9WLB10602 SIFLA9LB100602 SIFLA9ARC10602 SIFLA9ART10602 SIFLA9IDB40602 SIFLA9IDB30602 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 WINCC-V6 RT 1024 PTg 512 ATg WINCC-V6 RT 256 PTg 512 ATg WINCC-V6 RT 128 PTg 512 ATg WINCC-V6 RC 150K PTg 512 ATg WINCC-V6 RC 256K PTg 512 ATg WINCC-V6 RC 100K PTg 512 ATg WINCC-V6 RC 8000 PTg 512 ATg WINCC-V6 RC 64K PTg 512 ATg WINCC-V6 RC 1024 PTg 512 ATg WINCC-V6 RC 256 PTg 512 ATg WINCC-V6 RC 128 PTg 512 ATg WINCC-V6 WinCC Dat@M.150 Clients WINCC-V6 WinCC Dat@M.100 Clients WINCC-V6 WinCC Dat@M.50 Clients WINCC-V6 WinCC Dat@M.25 Clients WINCC-V6 WinCC Dat@M.10 Clients WINCC-V6 WinCC Dat@M.3 Clients WINCC ProAgent WinCC WINCC ProAgent 16 Clients WINCC ProAgent 8 Clients WINCC ProAgent 4 Clients WINCC Server WINCC-V6 Connectivity Pack WINCC Interf. S5-PMCH1 WINCC Interf. Applicom WINCC Interf. GE/SNP WINCC Interf. GE/Eth WINCC Interf. AB/DH WINCC Reserve #1 WINCC Reserve #2 WINCC Interf. S5TF/Eth WINCC Interf. S5SR/Eth WINCC Interf. 505/Eth WINCC Mitsubishi FX serial WINCC Mitsubishi MELSEC-A serial WINCC SIMADYN D-PMC Eth WINCC OMRON C-Series Host Link WINCC Profibus-DP WINCC Interf. 505 TCP/IP WINCC Interf. AB/DF1 WINCC Interf. Pro. FMS WINCC Interf. S7-PMC WINCC Interf. Mod ser. WINCC Interf. S5-PMCL2 WINCC Basic Process Ctrl WINCC Advanced Process Ctrl WINCC Storage WINCC Chipcard WINCC Video WINCC Internet Conn. WINCC-V6 Load Balancing WINCC-V6 Load Balancing Step Up WINCC-V6 Audit RC WINCC-V6 Audit RT WINCC-V6 Ind.DataBridge 10000 Tg WINCC-V6 Ind.DataBridge 2048 Tg v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.0 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 369 370 EKB Installer 728 729 A9IDB262 A9IDB162 SIFLA9IDB20602 SIFLA9IDB10602 WINCC-V6 Ind.DataBridge 512 Tg WINCC-V6 Ind.DataBridge 128 Tg v6.2 v6.2 864 A9WCP96 SIFLA9WCP90602 2 WinCC ES PO (unlimited) v6.2 865 A9WRP36 2 SIFLA9WRP30602 WinCC RT PO (2000) v6.2 866 A9WRP96 2 SIFLA9WRP90602 WinCC RT PO (unlimited) v6.2 9.42.5.1 WinCC 6.2 SP2 Enter topic text here. SIMATIC WinCC Systemsoftware V6.2 SP2 Runtimepakete auf CD-ROM Sprachvarianten: d/e/f/i/sp ; mit Lizenz für 128 PowerTags (RT 128) 256 PowerTags (RT 256) 1024 PowerTags (RT 1024) 8192 PowerTags (RT 8192) 65536 PowerTags (RT 65536) 102400 PowerTags (RT 102400) 153600 PowerTags (RT 153600) 262144 PowerTags (RT 262144) inkl. jeweils 512 Archivvariablen Komplettpakete auf CD-ROM Sprachvarianten: d/e/f/i/sp ; mit Lizenz für 128 PowerTags (RC 128) 256 PowerTags (RC 256) 1024 PowerTags (RC 1024) 8192 PowerTags (RC 8192) 65536 PowerTags (RC 65536) 102400 PowerTags (RC 102400) 153600 PowerTags (RC 153600) 262144 PowerTags (RC 262144) inkl. jeweils 512 Archivvariablen SIMATIC WinCC V6.2 Archive mit Lizenz für: 1500 Archivvariablen 5000 Archivvariablen 10000 Archivvariablen 30000 Archivvariablen 80000 Archivvariablen 120000 Archivvariablen Optionen für skalierbare Anlagenkonfigurationen WinCC/Server für WinCC V6.2 WinCC/CAS V6.2 SP2 (Central Archive Server) incl. 1500 ArchiveTags 6AV6381-1BC06-2AX0 6AV6381-1BD06-2AX0 6AV6381-1BE06-2AX0 6AV6381-1BH06-2AX0 6AV6381-1BF06-2AX0 auf Anfrage auf Anfrage auf Anfrage 6AV6381-1BM06-2AX0 6AV6381-1BN06-2AX0 6AV6381-1BP06-2AX0 6AV6381-1BS06-2AX0 6AV6381-1BQ06-2AX0 auf Anfrage auf Anfrage auf Anfrage 6AV6371-1DQ16-2AX0 6AV6371-1DQ16-2BX0 6AV6371-1DQ16-2CX0 6AV6371-1DQ16-2EX0 6AV6371-1DQ16-2GX0 6AV6371-1DQ16-2JX0 6AV6371-1CA06-2AX0 6AV6371-1DQ16-2XX0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list Optionen zur Erhöhung der Verfügbarkeit WinCC/Redundancy für WinCC V6.2 6AV6371-1CF06-2AX0 Optionen für SCADA-Erweiterungen WinCC/User Archives für WinCC V6.2 6AV6371-1CB06-2AX0 Optionen für individuelle Systemerweiterungen WinCC/ConnectivityPack V6.2 SP2 für WinCC V6.2 SP2 WinCC/ConnectivityStation V6.2 SP2 für WinCC V6.2 SP2 WinCC/Client Access License (CAL) für WinCC V6 WinCC/Client Access License pro Prozessor für WinCC V6 WinCC/IndustrialX V6.2 für WinCC V6.2 WinCC/ODK V6.0 SP4 für WinCC V6.2 WinCC/ODK Upgrade auf V6.0 SP4 6AV6371-1DR06-2AX0 6AV6371-1DR16-2AX0 6AV6371-1ES06-0AX0 6AV6371-1ES06-0CX0 6AV6371-1EL16-2AX0 6AV6371-1CC06-0EX0 6AV6371-1CC06-0EX4 9.42.5.2 WinCC 6.2 Russian WinCC V6.2 Release Notes in Russian Наименование WinCC V6.2 RunTime (вкл. 512 архивных тегов) WinCC V6.2 PowerPack для RunTime (увеличение количества переменных) © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 128 переменных 256 переменных 1024 переменных 8192 переменных 65536 переменных 128->256 переменных 128->1024 переменных 128->8192 переменных 128->65536 переменных 256->1024 переменных 256->8192 переменных 256->65536 переменных 1024->8192 Заказные номера 6AV6 3811BC06-2AX0 6AV6 3811BD06-2AX0 6AV6 3811BE06-2AX0 6AV6 3811BH06-2AX0 6AV6 3811BF06-2AX0 6AV6 3711BD06-2AX0 6AV6 3711BE06-2AX0 6AV6 3711BK06-2AX0 6AV6 3711BF06-2AX0 6AV6 3711BG06-2AX0 6AV6 3711BL06-2AX0 6AV6 3711BH06-2AX0 6AV6 371- Цена, € 2 115 3 250 3 995 4 800 5 900 1 135 1880 2 685 3 785 745 1550 2 650 805 371 372 EKB Installer переменных 1024->65536 переменн. 8192->65536 переменн. 128 переменных WinCC V6.2 RC 256 (полный пакет RC = RunTime + переменных проектирование, 1024 вкл.512 архивных тегов) переменных 8192 переменных 65536 переменных 1500 переменных WinCC V6.2 Archive 5000 (лицензии на архивные теги суммируются: 1500 + 5000 = 6500, 512 переменных базовых бесплатных архивных тегов не 10 000 переменных суммируется) 30 000 переменных 80 000 переменных 120 000 переменных WinCC Документация (англ./рус.) Upgrade WinCC V6.x на WinCC V6.2 RT RC Upgrade WinCC V5.x на WinCC V6.2 RT RC Опциональные пакеты: WinCC/Server V6.2 1BM06-2AX0 6AV6 3711905 1BJ06-2AX0 6AV6 3711 100 1BN06-2AX0 6AV6 3813 170 1BM06-2AX0 6AV6 3815 400 1BN06-2AX0 6AV6 3816 950 1BP06-2AX0 6AV6 3818 600 1BS06-2AX0 6AV6 3819 990 1BQ06-2AX0 6AV6 3712 300 1DQ16-2AX0 6AV6 3717 700 1DQ16-2BX0 6AV6 37112 1DQ16-2CX0 000 6AV6 37119 1DQ16-2EX0 500 6AV6 37149 1DQ16-2GX0 000 6AV6 37158 1DQ16-2JX0 000 В электр. виде 6AV6 381600 1AA06-2AX3 6AV6 381990 1AB06-2AX3 6AV6 381850 1AA06-2AX4 6AV6 3811490 1AB06-2AX4 6AV6 3711CA06-2AX0 WinCC / CAS V6.2(Central Archive Server, вкл. все 6AV6 371необходимые лицензии + 1500 арх. тегов) 1DQ16-2XX0 WinCC / Redundancy V6.2(для дублирования сервера, 6AV6 371одна лицензия на 2 сервера) 1CF06-2AX0 WinCC / User Archives V6.2 6AV6 3711CB06-2AX0 WinCC / WebNavigator V6.2 3 клиента 6AV6 3711DH06-2AX0 10 клиентов 6AV6 3711DH06-2BX0 25 клиентов 6AV6 3711DH06-2CX0 50 клиентов 6AV6 3711DH06-2DX0 WinCC / Web Navigator Diagnostic V6.2 Client 6AV6 371(построение систем диагностики на 1DH06-2EX0 основе WebNavigator) Server 6AV6 371- 2 935 7 115 2 935 705 5 450 9 350 16 250 28 750 2 115 520 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 1DH06-2FX0 WinCC / Web Navigator Upgrade c V6.x на V6.2 (не 6AV6 371зависит от числа клиентов) 1DH06-2XX3 1 клиент (спец. 6AV6 371цена) 1DN06-2LX8 WinCC / DataMonitor V6.2 1 клиент 6AV6 371(специальная цена для 1-го клиента 1DN06-2LX0 действительна до 30.09.2007) 3 клиента 6AV6 3711DN06-2AX0 10 клиентов 6AV6 3711DN06-2BX0 25 клиентов 6AV6 3711DN06-2CX0 50 клиентов 6AV6 3711DN06-2DX0 128 6AV6 371переменных 1DX06-1AX0 WinCC / IndustrialDataBridge V6.1 512 6AV6 371(совместим с WinCC V6.2) переменных 1DX06-1BX0 2 048 6AV6 371переменных 1DX06-1CX0 10 000 6AV6 371переменных 1DX06-1DX0 SIMATIC Maintenance Station Инженерное ПО + RT на 6ES7 8402007 100 устройств 0WD00-0YA0 (диагн. и обслуж. на базе PowerPa RT на 100 доп. 6ES7 840STEP7+WinCC) ck 100 устр. 0WD10-0YD0 WinCC / ConnectivityPack V6.2 6AV6 3711DR06-2AX0 WinCC / ConnectivityStation V6.2 (для доступа с 6AV6 371внешнего ПК к серверам WinCC, в т.ч. CAS) 1DR16-2AX0 WinCC / Client Access License (CAL) (лицензия на 6AV6 371доступ к данным WinCC с внешнего ПК) 1ES06-0AX0 WinCC / IndustrialX V6.2 6AV6 3711EL16-2AX0 WinCC/ODKV6.0SP4 6AV6 3711CC06-0EX0 WinCC / ProAgent V6.0 SP4 (только для 6AV6 371однопользовательских систем) 1DG06-0EX0 WinCC / Logon V1.4 в подготовке WinCC / Audit V 6.2 RT 6AV63711DV06-2AX0 RC WinCC /ChangeControl V6.2 ChangeControl RC 373 900 980 1890 2 890 5 290 9 500 17 500 990 1764 2 828 6 188 990 380 990 2 800 390 1465 2 645 885 6AV63711DV16-2AX0 6AV63711DV26-2AX0 9.42.5.2.1 WinCC/Server WinCC/Server предназначен для построения распределенных архитектур клиент/сервер. Один сервер позволяет обеспечить доступ до 32 клиентов к оперативным и архивным данным, сообщ ениям, мнемосхемам и отчетам через сеть Ethernet TCP/IP. В зависимости от задачи в единой системе допускается применять до 12 серверов (возможно, © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 374 EKB Installer резервированных). В архитектуре клиент-сервер: для клиента достаточно лицензии RT128, на сервере необходима лицензия на нужное число тегов (например, RT64K) плюс опция Server. Для дублирования серверов служит опция WinCC / Redundancy (содержит 2 лицензии на каждый сервер). WinCC/Server V6.2 6AV6 371-1CA062AX0 2 935 9.42.5.2.2 WinCC/Redundancy WinCC/Redundancy позволяет организовать параллельную работу 2-х одноместных систем WinCC, 2-х WinCC SCADA-серверов или 2-х WinCC архивных серверов с функцией взаимного мониторинга. Каждая станция имеет свой набор связей с ПЛК и свои архивы. При сбое в работе одной из WinCC станций управление системой передается резервной станции. В структурах клиент/сервер обеспечивается автоматическое переключение клиентов на резервный сервер, непрерывная работа оперативного управления всех WinCC станций. Механизм переключения на резервную станцию исключает возможность потери данных. После устранения неисправностей автоматически выполняется синхронизация работы резервированной пары WinCC станций с передачей данных (данные процесса, архивы, пользовательские архивы, сообщ ения) из памяти работавшей станции в память включенной станции. Копирование данных в память восстановленной станции выполняется в фоновом режиме и не влияет на работу станций операторов. WinCC / Redundancy V6.2 (для дублирования сервера, одна лицензия на 2 6AV6 371-1CF06сервера) 2AX0 2 935 9.42.5.2.3 WinCC/Central Archive Server (CAS) WinCC /Central Archive Server (CAS) V6.2 For the central process data archiving and analysis, the archive data of all servers present in the system can be swapped out to a computer with the new option CAS. For the display and analysis, the data access is transparent and - among other things - continues to be possible via the standard WinCC clients. In doing so, it is unimportant for the clients whether the data is still located on the WinCC server or is already on the CAS. Process value as well as alarm archives are created on the individual WinCC servers and - at the conclusion of individual database segments - transferred to the CAS. Thanks to "Store&Forward", the data is safely transferred even in the case of network interruptions between the WinCC server and the CAS (as soon as the network is operational again). WinCC /CAS V6.2 includes all licenses for the central archive server including 1500 archive tags. The number of archive tags can be increased up to 120000 via PowerPacks. WinCC /CAS V6.2 is trilingual (German, English and French). © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 375 WinCC/Central Archive Server (CAS) V6.2 предназначен для централизованного архивирования данных всех серверов. Архивы переменных и сообщ ений ведутся на WinCC-серверах, и по завершении сегмента передаются на CAS. С клиентов обеспечивается прозрачный доступ к данным как серверов WinCC, так и CAS. WinCC/CAS содержит все лицензии, необходимые для построения CAS, включая лицензию на 1500 архивных тегов. Лицензии на архивные теги суммируются (кроме 512 базовых бесплатных тегов). Увеличение количества тегов (до 120 000) возможно при помощ и PowerPack. WinCC / CAS V6.2 (Central Archive Server, вкл. все необходимые лицензии + 6AV6 371-1DQ161500 арх. тегов) 2XX0 1500 переменных 6AV6 371-1DQ162AX0 WinCC V6.2 Archive (лицензии на архивные теги суммируются: 1500 + 5000 = 6500, 512 базовых бесплатных архивных тегов не суммируется) 5000 переменных 6AV6 371-1DQ167 700 2BX0 10 000 переменных 6AV6 371-1DQ1612 000 2CX0 30 000 переменных 6AV6 371-1DQ1619 500 2EX0 80 000 переменных 6AV6 371-1DQ1649 000 2GX0 120 000 переменных 6AV6 371-1DQ1658 000 2JX0 7 115 2 300 9.42.5.2.4 WinCC Archive 1500 6AV6 371-1DQ16- 2 300 SIFCY9WTGX0600 переменных 2AX0 WinCC V6.2 Archive 1 (лицензии на архивные теги суммируются: 1500 + 5000 = 6500, 512 базовых бесплатных архивных тегов не суммируется) 5000 6AV6 371-1DQ16- 7 700 SIFCY9WTGX06002 переменных 2BX0 10 000 6AV6 371-1DQ16- 12 000 SIFCY9WTGX06003 переменных 2CX0 30 000 6AV6 371-1DQ16- 19 500 SIFCY9WTGX06004 переменных 2EX0 80 000 6AV6 371-1DQ16- 49 000 SIFCY9WTGX06005 переменных 2GX0 120 000 6AV6 371-1DQ16- 58 000 SIFCY9WTGX06007 переменных 2JX0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 376 EKB Installer 623 624 625 626 627 628 629 A9WTG662 A9WTG562 A9WTG462 A9WTG362 A9WTG262 A9WTG162 A9WSRD62 SIFLA9WTG70602 SIFLA9WTG50602 SIFLA9WTG40602 SIFLA9WTG30602 SIFLA9WTG20602 SIFLA9WTG10602 SIFLA9WSRD0602 WINCC-V6 Arch 120000 ATg WINCC-V6 Arch 80000 ATg WINCC-V6 Arch 4G ATg UNLIM WINCC-V6 Arch 30000 ATg WINCC-V6 Arch 5000 ATg WINCC-V6 Arch 1500 ATg WINCC Redundancy v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 v6.2 New for Archive Licenses For archive licenses, the new license type "Count-Relevant" is being introduced starting with WinCC V6.2. It enables a much finer stacking of the licenses. If, for example, a WinCC project uses a license for 1500 archive tags as well as a license for 5000 archive tags, then a total of 6500 archive tags are available on this computer. On the other hand, the 512 free archive tags included in the delivery scope of the basic packages are not added up. For using more 512 Archive Tags is required SIFCY9WTGX0600* WinCC Archive v6.2 Select> Short name Long name License name Version 622 A9WARC62 SIFLA9WARC0602 WINCC User Archives v6.2 623 Y9WTG662 SIFCY9WTGX06026 WINCC-V6 Arch 80000 ATg v6.2 624 Y9WTG562 SIFCY9WTGX06025 WINCC-V6 Arch 10000 ATg v6.2 625 Y9WTG462 SIFCY9WTGX06024 WINCC-V6 Arch 4G ATg UNLIM v6.2 626 Y9WTG362 SIFCY9WTGX06023 WINCC-V6 Arch 30000 ATg v6.2 627 Y9WTG262 SIFCY9WTGX06022 WINCC-V6 Arch 5000 ATg v6.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 377 9.42.5.2.5 WinCC/UserArchives WinCC/UserArchives предназначен для построения архивов пользователя с произвольной структурой и управления записью/чтением в/из них. Такие архивы могут применяться для реализации процедур рецептурного управления, хранения каких-либо связанных данных. WinCC и ПЛК (например, SIMATIC S7) выполняют запись данных в архивы, а, при необходимости, могут обмениваться этими данными между собой. Лицензия WinCC/User Archives устанавливается только на серверы или однопользовательские станции WinCC. Пользователь получает возможность вводить параметры рецепта в WinCC, сохранять их в архиве пользователя и пересылать задания на уровень систем автоматизации. С другой стороны, ПЛК могут выполнять сбор данных в течение заданного промежутка времени (например, смены) и посылать их в пакетном виде в WinCC. Специальный ActiveX элемент позволяет производить в Runtime интерактивный просмотр содержимого архивов в табличном виде, редактирование, импорт и экспорт записей. Данные также могут быть представлены в виде свободно разрабатываемой формы. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 378 EKB Installer 9.42.5.2.6 WinCC/Web Navigator WinCC/Web Navigator поддерживает исчерпывающ ий набор функций оперативного управления и мониторинга предприятия через Internet, Intranet или локальную сеть. Конфигурация системы на основе WinCC и WinCC/Web Navigator включает в свой состав: - Web сервер на основе однопользовательской станции WinCC, WinCC клиента или WinCC сервера. - Web клиент, выполняющ ий функции оперативного управления и мониторинга через Internet браузер с поддержкой элементов управления ActiveX. Базовое программное обеспечение WinCC на Web клиенте не нужно. Установка Web сервера может производиться на мультиклиента распределенной системы. В этом случае Web клиенты получают доступ к данным нескольких (до 12) WinCC серверов. В резервированных конфигурациях на основе WinCC/Redundancy Web клиенты переключаются в этом случае на работающ ий сервер вместе с мультиклиентом и его WEB сервером. Поддерживается управление пользователями WinCC. Поддержка SIMATIC Logon осущ ествляется, начиная с версии WinCC 6.2. Обеспечивается доступ к пользовательским архивам. Могут исполняться С и VB скрипты для реализации функций пользователя. WinCC / WebNavigator V6.2 Basic Package (3 3 клиента client licenses) 6AV6 3711DH06-2AX0 5 450 10 Client Licenses 10 клиентов 6AV6 3711DH06-2BX0 6AV6 3711DH06-2CX0 9 350 6AV6 3711DH06-2DX0 6AV6 3711DH06-2EX0 28 750 6AV6 3711DH06-2FX0 520 25 Client Licenses 25 клиентов 50 Client Licenses 50 клиентов WinCC / Web Navigator Diagnostic V6.2 Diagnostics (построение систем диагностики на основе Client WebNavigator) Client Server Diagnostics Server Web Load Balancing Web Load Balancing StepUp (incl. 2 licenses) 6AV6371-1DH062JX0 Web Load Balancing StepUp (incl. 2 licenses) 6AV6371-1DH062FJ0 16 250 2 115 9.42.5.2.7 WinCC/Dat@Monitor WinCC/Dat@Monitor применяется для отображения и анализа состояния техпроцесса, архивных данных и отчетов на любом офисном ПК, оснащ енном стандартным набором инструментов, таких как Internet Explorer и Excel. WinCC/Dat@Monitor включает в свой состав набор Internet-совместимых инструментальных средств: - Process Screens – просмотр мнемосхем WinCC при помощ и Internet Explorer (WebNavigator без © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 379 управления). - Trends&Alarms – отображение и анализ архивных данных WinCC, экспорт данных из Internet Explorer. - Excel Workbooks – разработка отчетов и анализ данных в MS Excel. Публикация отчетов в WEB. - Reports – запуск формирования отчетов по событию или по расписанию в форматах Excel или PDF. - WebCenter – построение Internet портала, как центральной точки доступа ко всем данным WinCC. WinCC / DataMonitor V6.2 (специальная цена для 1-го клиента действительна до 30.09.2007) 1 Client License (1 клиент) 3 Client Licenses (3 клиента) 10 Client Licenses (10 клиентов) 25 Client Licenses (25 клиентов) 50 Client Licenses (50 клиентов) 1 клиент (спец. цена)6AV6 371-1DN062LX8 6AV6 371-1DN062LX0 6AV6 371-1DN062AX0 6AV6 371-1DN062BX0 6AV6 371-1DN062CX0 6AV6 371-1DN062DX0 980 1890 2 890 5 290 9 500 17 500 1. SIMATIC WinCC/DataMonitor V6.2 - What's new? With Version 6.2, new functions, new names as well as a new license are introduced. The SIMATIC WinCC/DataMonitor (formerly Dat@Monitor) is a component of SIMATIC WinCC/Plant Intelligence. With the WinCC/DataMonitor, data from the process level can be provided to the office world. The newly set up WinCC/DataMonitor V6.2 offers a collection of powerful functions for the analysis and depiction of data from the production. With it, you gain direct access to the production data via the Intranet or Internet. With the tools of the WinCC/DataMonitor, the user can: Efficiently monitor and analyze production lines Support decisions with reports View the production status at any time and from anywhere To the proven functions, the two components WebCenter and Reports have been newly added. In addition, the Trends & Alarms were expanded and adapted to the new WebCenter. The WinCC/ DataMonitor consists of the functions: Published Reports (new) Excel Workbooks (formerly Dat@Workbook) Process Screens (formerly Dat@Symphony) © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 380 EKB Installer WebCenter (new) Trends & Alarms (formerly Dat@View) Furthermore, a single license is available starting with Version 6.2. 1.1 Published Reports "Published Reports" is a function newly added in Version 6.2. With the WinCC/DataMonitor function "Published Reports", print jobs from WinCC and prepared Excel workbooks can be used for the output of analysis results and process data. The data - that up to now was available in a print job from WinCC or in an Excel workbook - can be retrieved via the Internet in "Published Reports". The report is executed event-controlled or time-controlled. The generated reports are stored centrally on the DataMonitor server in either a "public" area, which is accessible by all users, or in a "private" area, which is only accessible by the respective user. "Published Reports" distinguish themselves through the following key features: Parameter setting and execution of report templates in the Internet Explorer via an installation-free client Automatic filling out of prepared DataMonitor Excel workbooks or WinCC reports Time-controlled generation of reports: hourly, daily, weekly, monthly Event-controlled generation of reports Generation of PDF files from WinCC report templates Downloading of reports from the DataMonitor server Automatic distribution of reports by e-mail Storing of reports either as public reports or as private reports 1.2 Excel Workbooks "Excel Workbooks" replace the former "Dat@Workbook". With "Excel Workbooks" of the WinCC/DataMonitor, it is possible to display alarms and values of a WinCC project's process or archive tags in an Excel table. Besides the current values, additional information - such as timestamp or quality code of the tag - can be displayed as well. In Excel, the user can further process the data or graphically format it. With the Excel Workbook Wizard, Excel-based reports can be published for WinCC data and thus made available to the Intranet/Internet. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 381 Excel Workbooks offers: Direct access to the WinCC data from Microsoft Excel VBA interface for integrating Excel workbooks into own applications Automatic login for the automatic generation of Excel reports (see "Published Reports") Opening of "Published Reports" in the browser or in Excel 1.3 Process Screens "Process Screens" replace the former "Dat@Symphony". The WinCC/DataMonitor function "Process Screens" serves purely for the monitoring of and navigation across WinCC process screens with the MS Internet Explorer, and is thus a so-called "view-only client". It can navigate through the process screens - and the controls contained therein that have been published for the Internet. The cursor - in the form of a so-called "view-only cursor" indicates that no process-relevant operations are possible. Analogous to the WinCC/Web Navigator, new functionality is supported with the "Process Screens": Screens utilizing own header files in C scripts can be displayed without adaptations by the DataMonitor User-defined standard functions can be displayed in the Web View Publisher and are thus enabled for use at the Web client WinCC screens, in which indirect addressing is used, can now be posted to the Web without modification Functions and display possibilities of the Basic Process Control are now also supported at the DataMonitor Further information can be found in the delivery release pertaining to the option SIMATIC WinCC/ Web Navigator V6.2. (entry ID: 24369567). 1.4 WebCenter "WebCenter" is a function newly added in Version 6.2. With the "WebCenter" of the WinCC/DataMonitor, Internet pages for the depiction of WinCC data can be easily created online and without an "installation download". The "WebCenter" provides the possibility of combining different views, e.g. for the management or the maintenance technicians. The "WebCenter" is the central information portal for the access to WinCC data via the Intranet or Internet, and serves as the center for the creation and management of "WebCenter" pages. In a "WebCenter" page, the user can arrange and save the "WebParts" (the DataMonitor objects to be © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 382 EKB Installer displayed ) to create screen views. Thus, the parallel display of process data and data from the alarm archives is possible for any absolute or relative time period. Different display types are provided by separate "WebParts": Depiction of process values in tabular form Calculation and output of process values over consistent time slices Display of statistics functions for process values Output of trend display for process values Bar charts for process values (aggregates) Pie charts for process values (aggregates) Depiction of the hit list of the alarms Depiction of alarms in tabular form Arranging of links between "WebCenter" pages Providing of links to external Internet pages Display of information that is to be output at specific times Integration and display of bitmaps Offer for selection the last created reports 1.5 Trends & Alarms "Trends & Alarms" replace the former "Dat@View". "Trends & Alarms" are used for the display and analysis of process values and alarms archived in WinCC. Via predefined pages, the user selects the WinCC data to be displayed as well as the desired absolute or relative time period. Featuring the same look and feel as the WebCenter, "Trends & Alarms" offer the following functions: Multiple X and Y axes (up to three axes) Configurable absolute or relative time period Access to the WinCC/Central Archive Server (WinCC CAS) Savable configuration with WebCenter functionality Limitation of the decimal places © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 383 Adjustable colors for the trend display 1.6 Single License for the WinCC/DataMonitor With the new single license, existing systems with only a single analysis station can be supplemented - for example - with the WebCenter functionality for the production management. Thus, a bridge from the production level to the management level is built with minimal effort. A license is occupied at the server as long as a DataMonitor client - independent of the functionality used - is connected with the DataMonitor server. 2. Upgrades to and Compatibility with older WinCC/DataMonitor Versions To upgrade the WinCC/DataMonitor V6.x to the WinCC/DataMonitor V6.2, an upgrade package is offered, which is independent of the respective client count. 2.1 DataMonitor Server Older DataMonitor versions can be upgraded to V6.2. In doing so, the old DataMonitor is first deinstalled and then the DataMonitor V6.2 installed. 2.2 DataMonitor Client The DataMonitor server checks the version compatibility between server and client and, if required, automatically installs the corresponding client component. This means: An 'old' DataMonitor client Vx.y encounters a current DataMonitor server V6.2 -> Current DataMonitor client V6.2 automatically installs itself A current DataMonitor client V6.2 encounters an 'old' DataMonitor server Vx.y -> Communication will continue to function, but with the function scope of Vx.y 9.42.5.2.8 IndustrialDataBridge IndustrialDataBridge устанавливает соединения между интерфейсами источника и приемника данных и обеспечивает передачу данных между ними. Источники и приемники данных: - OPC Data Access (например, WinCC, WinAC и SIMATIC NET, выступающ ие в роли OPC сервера) - Базы данных SQL / OLE-DB / ODBC (MS Access, MS SQL 2000, Oracle, WinCC UserArchive) - SEND/RECEIVE - WinCC OLE-DB Provider (только как источник) - MS Excel, CSV файл (только как приемник). Передача данных осущ ествляется циклически, по изменению или по событию. IndustrialDataBridge может работать независимо от WinCC, в т.ч. как NT-сервис WinCC / IndustrialDataBridge V6.1 совместим с WinCC V6.2 WinCC / IndustrialDataBridge V6.1 (совместим с WinCC V6.2) 512 переменных © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 128 переменных 6AV6 371-1DX061AX0 6AV6 371-1DX06- 1764 990 384 EKB Installer 2 048 переменных 10 000 переменных 1BX0 6AV6 371-1DX061CX0 6AV6 371-1DX061DX0 2 828 6 188 9.42.5.2.9 WinCC/Connectivity Pack WinCC /Connectivity Station V6.2 For an easy access by external computers to archive data as well as current process values and alarms, the Connectivity Station was designed. The Connectivity Station is an expansion of the already available Connectivity Pack. In contrast to the Connectivity Pack, the installation of a WinCC runtime is not necessary on a Connectivity Station. The Connectivity Station offers OPC interfaces as well as an OLE DB Provider, via which WinCC server data can be accessed. The transparent access automatically compiles the requested process data from the archive databases. For the client software it is thus unimportant whether the data is read from a specific server, its redundant partner or even the CAS. Supported interfaces include OPC DA, OPC A&E, OPC HDA and OLE DB for process values. The Connectivity Station is configured on an NCM PC or in the SIMATIC Manager.. WinCC/Connectivity Pack WinCC V6 характеризуется наличием открытых интерфейсов OPC HDA (Historical Data Access), OPC A&E (Alarm&Events), WinCC OLE-DB, необходимых для доступа к текущ им данным и базе данных WinCC. ConnectivityPack предоставляет все нужные компоненты: OPC HDA, A&E, XML-DA и WinCC OLE-DB Provider. Доступ к станции WinCC через интерфейсы ConnectivityPack требует наличия на стороне станции WinCC лицензии на ConnectivityPack, а на клиенте - WinCC/Client Access License (если на нем нет любого из ПО WinCC, WebNavigator, или ConnectivityPack Server). WinCC/Connectivity Station является расширением ConnectivityPack и предназначена для доступа к данным WinCC с ПК, не имеющ его инсталляции WinCC. Обеспечивается прозрачный доступ к данным дублированных серверов и CAS. Проектирование ConnectivityStation производится на NCM PC или SIMATIC Manager. WinCC / ConnectivityPack V6.2 6AV6 3711DR06-2AX0 WinCC / ConnectivityStation V6.2 (для доступа с внешнего 6AV6 371ПК к серверам WinCC, в т.ч. CAS) 1DR16-2AX0 990 2 800 9.42.5.2.10 WinCC/Maintenance Station 2007 SIMATIC Maintenance Station Furthermore, a SIMATIC WinCC station, in addition to its function as process visualization and operator station, can now also be configured as a SIMATIC Maintenance Station or the efficient plant maintenance. For further information, please refer to the separate sales/delivery release (entry ID 24363298). The SIMATIC Maintenance Station 2007 is a software option for system integrated © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 385 diagnostics and plant-related asset management on the basis of STEP 7 and WinCC. Automatic generation of a maintenance view in WinCC from the STEP 7 hardware Configuration of plant-wide visualization of all automation components, from management to field level, in ready linked hierarchically arranged WinCC screens Illustration of central and distributed SIMATIC S7 components, PROFIBUS and PROFINET networks and associated bus nodes Ethernet network components and industry PCs can be included via the SIMATIC Net SNMP OPC server Display of the conditions of devices with group status generation in overview and detailed screens. Support of the device conditions “Maintenance requirement“ and “Maintenance request“ for condition-based maintenance Provision of uniform faceplates for the display of detailed information for all depicted components Display of the device indentification data (electronic type label) Forwarding of maintenance requests directly from WinCC Integrated display of the request status Benefits: Reduction of downtimes: Problems in the plant are identified more quickly thanks to the uniform and clear representation of all important maintenance-relevant information Avoiding plant standstills: Support of condition-based maintenance Reduction of maintenance costs: Optimization of the information flow between production and maintenance by forwarding of maintenance requests and display of the request status Transparency and traceability: All events are message based and can therefore be archived and traced An extensive database is created that can be analyzed by WinCC means or with external tools Scaleability: Support of WinCC single-user stations and client server configurations. The SIMATIC Maintenance Station can be added to an existing WinCC project Consistency: Maintenance view is generated from the control project and is consistent with it © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 386 EKB Installer Flexibility in the choice of devices Use of PROFIBUS and PROFINET standards for device integration Additional proxy concept enables representation of devices that are not included in the STEP 7 Hardware Configuration, or that do not support the standard diagnosis of PROFIBUS / PROFINET Application Option package for STEP7 V5.4 and WinCC V6.2 for diagnosis and maintenance of machines and plant Generation of a WinCC maintenance view for a STEP 7 project / multiproject Composition and licensing The SIMATIC Maintenance Station is available in the form of a basic package containing all tools required for the configuration of a Maintenance Station, as well as a runtime license for the representation of 100 devices. Power Packs for 100, 500 or 1000 devices are available for the operation of larger quantity frameworks. They are simply added and can be combined with one another at random. The precondition for the configuration of a SIMATIC Maintenance Station is a STEP 7 license (V5.4 and higher), a WinCC RC license (V6.2) and, if required, SIMATIC Net licenses in line with the plant configuration. The precondition for the operation of a SIMATIC Maintenance Station are WinCC licenses (V6.2) in line with the plant configuration. Countable devices are: Automation systems Distributed devices (PROFIBUS / PROFINET) PCs Network components Proxy blocks (Asset Proxies) The SIMATIC Maintenance Station supports German / English / French / Italian / Spanish. The messages displayed in the Maintenance Station can be translated in STEP 7 by the user into more languages. WinCC/Maintenance Station 2007 – предназначена для диагностики систем, построенных на базе STEP7 и WinCC. Экраны диагностики генерируются из аппаратной конфигурации STEP7. Прочие Ethernet устройства подключаются через Simatic NET SNMP OPC сервер. 739 MAINES70 SIFLMAINES0700 Maintenance ES V7.0 v7.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 387 740 YMAINR70 SIFLYMAINR0700 Maintenance RT V7.0 (unlimited) v7.0 741 YMAINR71 SIFCYMAINR07001 Maintenance RT V7.0 (10) v7.0 742 YMAINR72 SIFCYMAINR07004 Maintenance RT V7.0 (100) v7.0 743 YMAINR73 SIFCYMAINR07007 Maintenance RT V7.0 (1000) v7.0 You can install unlimited key SIFLYMAINR0700, or count's key SIFCYMAINR0700* SIMATIC Maintenance Station 2007 Инженерное ПО + RT на 100 (диагн. и обслуж. на базе STEP7+WinCC) устройств PowerPack RT на 100 доп. устр. 100 6ES7 840-0WD000YA0 6ES7 840-0WD100YD0 990 380 SIMATIC Maintenance Station Edition 2007 Engineering SW (Floating License) RT license for 100 devices (Single License, count relevant) 6ES7840-0WD00-0YA0 SIMATIC Maintenance Station Powerpack 100 RT license for 100 additional devices (Single License, count relevant) 6ES7840-0WD10-0YD0 SIMATIC Maintenance Station Powerpack 500 RT license for 500 additional devices (Single License, count relevant) 6ES7840-0WD20-0YD0 SIMATIC Maintenance Station Powerpack 1000 RT license for 1000 additional devices (Single License, count relevant) 6ES7840-0WD30-0YD0 9.42.5.2.11 WinCC/ODK WinCC/ODK – это набор библиотек и примеров, позволяющ ий использовать открытые программируемые интерфейсы для доступа к данным и функциям WinCC. Открытые интерфейсы WinCC/ODK позволяют разрабатывать собственные приложения и дополнения для базового программного обеспечения WinCC. WinCC/ODKV6.0SP4 6AV6 371-1CC060EX0 2 645 9.42.5.2.12 WinCC/Audit WinCC/Audit реализует защ ищ енный журнал слежения как за изменениями в конфигурации проекта, так и за действиями операторов. В систему слежения могут быть включены любые элементы интерфейса пользователя, а также таблицы UserArchive. Контроль версий проекта упрощ ает документирование, создание промежуточных версий проекта и © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 388 EKB Installer предоставляет функцию отката. WinCC / Audit V 6.2 Audit RT 6AV6371-1DV062AX0 Audit RC 6AV6371-1DV162AX0 ChangeControl RC 6AV6371-1DV262AX0 Upgrade 6AV6371-1DV062AX3 The following licenses are offered: SIMATIC WinCC /ChangeControl RC V6.2 and SIMATIC WinCC /Audit RC V6.2 and SIMATIC WinCC/ Audit RT V6.2. For the configuration of which audit trail contents are to be recorded and the project versioning, an RC license is generally required, i.e. WinCC /Audit RC or SIMATIC WinCC /ChangeControl RC. For all WinCC stations (clients and servers) on which an audit trail is recoded, an RT license WinCC /Audit RT - is required. For all external applications on which audit entries for the audit trail are generated, an RT license is required. Quantity Schedule There are no quantity limitations with regard to the number of audits the number of audited servers the number of simultaneously accessing viewers SIMATIC WinCC /Audit V6.2 - Field of Application SIMATIC WinCC /Audit includes all the functions of SIMATIC WinCC /ChangeControl and additionally supports the user in the recording and reporting of operator action while in the runtime mode: More and more often it becomes necessary - be it because it is required by law or because of own wishes - for runtime operator actions occurring throughout the entire plant to be recorded in a separate audit trail, in order to maintain a clear proof of who performed what operator action when © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 389 in the plant. The use of WinCC /Audit is recommended especially for plant builders who want to validate their plant according to the 21 CFR Part 11 guidelines of the FDA (American Food and Drug Administration) or assure the traceability according to the EU law No. 178/2002. The comprehensive electronic recording of plant changes in the audit trail greatly reduces the work needed for the creation of the plant paper documentation and prevents manual error sources. 9.42.5.2.13 WinCC /ChangeControl New: SIMATIC /ChangeControl V6.2 - Field of Application New: SIMATIC WinCC /ChangeControl is a new product and forms a functional subset of SIMATIC WinCC /Audit with a correspondingly lower pricing. SIMATIC WinCC /ChangeControl supports the user in the recording and reporting of changes while in the engineering mode: Many times, plants are still being modified even after the commissioning - and that independently by different persons. If errors occur, downtimes are the result, and an extensive analysis may be required, since information pertaining to the changes is often not available. SIMATIC / ChangeControl supports the user by automatically recording - without interruption - all changes starting from a certain project revision level, which considerably facilitates the error analysis and helps minimize downtimes. But it also supports the plant builder, e.g. the OEM, in monitoring the plant for changes at the plant operator; thus any change to the engineering of the system can be reproduced without interruption. If irregular operating states occur at the plant operator, the plant builder can very quickly and efficiently assist the plant operator on the basis of the change information contained in the audit trail, thus minimizing service costs and downtimes. New: Project versioning - within SIMATIC WinCC /ChangeControl, the project versioning enables the archiving as well as restoring of project revision levels of WinCC (including a version number and a comment). In addition, it is recorded in an audit trail which version was created by whom and when. The following licenses are offered: SIMATIC WinCC /ChangeControl RC V6.2 and SIMATIC WinCC /Audit RC V6.2 and SIMATIC WinCC/ Audit RT V6.2. WinCC / Audit V 6.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Audit RT 6AV6371-1DV062AX0 Audit RC 6AV6371-1DV162AX0 ChangeControl RC 6AV6371-1DV262AX0 390 EKB Installer Upgrade 6AV6371-1DV062AX3 9.42.5.2.14 WinCC/IndustrialX WinCC/IndustrialX позволяет разрабатывать типовые ActiveX объекты, гибко конфигурируемые под требования отрасли промышленности, для которой они предназначены. Например, они могут быть адаптированы для проектов химической промышленности, производства стекла и бумаги и т.д. WinCC / IndustrialX V6.2 6AV6 371-1EL162AX0 1465 9.42.5.2.15 WinCC/ProAgent WinCC/ProAgent позволяет создавать мощ ные системы диагностики и поиска неисправностей в приложениях, построенных на основе ПЛК SIMATIC S7/WinAC и устройств визуализации SIMATIC HMI. Стандартная концепция диагностики всех компонентов SIMATIC. Оптимальное взаимодействие с пакетами STEP7, S7-Pdiag, S7-Graph и системами визуализации WinCC и WinCC flexible. При возникновении неисправностей ProAgent формирует сводную и детальную информацию о месте и причинах их появления, обеспечивает поддержку ее устранения. WinCC / ProAgent V6.0 SP4 (только для однопользовательских систем) 6AV6 371-1DG060EX0 885 9.42.6 WinCC v6.0 SP4 Serial number 1234-12345-12345 9.42.7 WinCC v6.0 SP3 Enter topic text here. 9.42.8 WinCC v6.0 SP2 Enter topic text here. 9.42.9 WinCC v5.0 Enter topic text here. 9.42.10 WinCC/DowntimeMonitor V1.0 http://support.automation.siemens.com/WW/view/en/26664769 SIMATIC WinCC/DowntimeMonitor V1.0? With the version 1.0, this option is being introduced for WinCC V6.2. The SIMATIC WinCC/DowntimeMonitor is a component of the SIMATIC WinCC/Plant Intelligence. With the WinCC/DowntimeMonitor, Key Performance Indicators (KPIs) of individual machine units, subsystems as well as production lines (equipment) can be determined. With the DowntimeMonitor, the user can efficiently monitor and analyze production lines. The © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 391 DowntimeMonitor can be installed on either a WinCC single-station system, WinCC server or WinCC client with project. It consists of the DowntimeMonitor server and a database, an engineering client and a runtime user interface. This WinCC option supports the user in the execution of the following tasks: Tracing of downtime events, assignment of causes and reasons, assessment and monitoring of the equipment efficiency. Decision making on the basis of performance indicators through identification of the events that cause cost-intensive equipment failures. Identification of speed and quality losses. 1.1.DowntimeMonitor Server The licensing takes place via the number of the equipment units used. The basic package contains 5 licensed equipment units. Additional licenses are available in steps of up to 25, up to 50, up to 100 and up to 200 equipment units. The DowntimeMonitor server installation is comprised of the server with database, the engineering client and the runtime user interface. 1.2 Engineering Client On the engineering client it is possible to edit a DowntimeMonitor project, which exemplary depicts the behavior of a specific equipment unit for a defined time period. For this, the following configuration options exist: Time model Reason tree Equipment unit Algorithms (predefined and specific) Cyclic calculations Shift calender 9.42.11 WinCC/ProcessMonitor V1.0 http://support.automation.siemens.com/WW/view/en/26679792 SIMATIC WinCC/ProcessMonitor V1.0? With the version 1.0, this option is being introduced for WinCC V6.2. The SIMATIC WinCC/ProcessMonitor is a component of the SIMATIC WinCC/Plant Intelligence. The WinCC/ProcessMonitor is used for collecting, manipulating, analyzing and storing © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 392 EKB Installer process values. The process values are read directly from WinCC and connected to the corresponding analysis function. The ProcessMonitor can be installed on either a WinCC singlestation system, WinCC server or WinCC client with project. It consists of the ProcessMonitor server and a database, an engineering client and a runtime user interface. This WinCC option supports the user in the execution of the following tasks: Storing and presentation of process data, which has been prepared via predefined or userdefined statistical calculation operations. Depiction of raw process data from WinCC archives. Statistical ad hoc analyses for stored process data (from the ProcessMonitor and the WinCC Tag Logging archives). Statistical ad hoc analyses for alarms. Data retrieval from the WinCC Tag Management, WinCC Tag Logging and WinCC Alarm Logging. 1.1 ProcessMonitor Server The licensing takes place via the number of used Key Performance Indicators (KPIs). The basic package contains 5o KPIs. Additional licenses are available in steps of up to 250 and up to 1500 KPIs. The ProcessMonitor server installation is comprised of the server with database, the engineering client and the runtime user interface. 1.2 Engineering Client On the engineering client it is possible to edit a project. The most important objects used for the acquisition of data and for the execution of calculations are the tags. In contrast to WinCC standard tags, these are functionally expanded tags. After the configuration, each tag possesses a specific functionality and thus is a KPI. Four different types of tags exist: Archiving data Predefined calculations User-defined calculations Context-dependent data 9.43 WinCC Flexible © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 393 9.43.1 WinCC_Flexible 2008 WinCC_Flexible 2008 Select> Short name Long name 1071 A9XEP113 SIFLA9XEP10103 WinCC flexible 2008 Advanced v1.3 1077 A9XRP413 SIFLA9XRP40103 WinCC flexible 2008 Runtime (4096) v1.3 1081 A9XCC113 SIFLA9XCC10103 WinCC flexible/ChangeControl 2008 v1.3 1396 WCOPRT99 SIFLWCOPRT999 9 WinCC OPC Server for RT Advanced v99.9 1397 WCOPSP99 SIFLWCOPSP999 9 WinCC OPC Server for Panels v99.9 1398 WCSAPA99 SIFLWCSAPA999 9 WinCC Sm@rtAccess for Panels v99.9 1399 WCSART99 SIFLWCSART9999 WinCC OPC Server for RT Advanced v99.9 1400 WCSSPA99 SIFLWCSSPA9999 WinCC Sm@rtService for Panels v99.9 1401 WCSSRT99 SIFLWCSSRT9999 WinCC Sm@rtService for RT Advanced v99.9 1402 WCSSSP99 SIFLWCSSSP9999 WinCC Sm@rtServer for SIMATIC Panel v99.9 1226 A9XAU313 SIFLA9XAU30103 WinCC flexible 2008 SP2 /Audit for PC v1.3 1227 A9XAU213 SIFLA9XAU20103 WinCC flexible 2008 SP2/Audit for Panels v1.3 1228 A9XSS313 SIFLA9XSS30103 WinCC flexible 2008 SP2/Sm@rtService for PC v1.3 1229 A9XSS213 SIFLA9XSS20103 WinCC flexible 2008 SP2/Sm@rtService for Panel v1.3 1230 A9XSA313 SIFLA9XSA30103 WinCC flexible 2008 SP2/Sm@rtAccess for PC v1.3 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 License name Version 394 EKB Installer 1231 A9XSA213 SIFLA9XSA20103 WinCC flexible 2008 SP2/Sm@rtAccess for Panel v1.3 1232 A9XPA313 SIFLA9XPA30103 WinCC flexible 2008 SP2 /ProAgent for PC v1.3 1233 A9XPA213 SIFLA9XPA20103 WinCC flexible 2008 SP2 /ProAgent for Panel v1.3 1234 A9XOP313 SIFLA9XOP30103 WinCC flexible 2008 SP2 /OPC-Server for PC v1.3 1235 A9XOP213 SIFLA9XOP20103 WinCC flexible 2008 SP2 /OPC-Server for MP v1.3 1236 A9XCI313 SIFLA9XCI30103 1237 A9XCC113 SIFLA9XCC10103 WinCC flexible 2008 SP2 /ChangeControl V1.3 Advanced v1.3 1238 A9XAR313 SIFLA9XAR30103 WinCC flexible 2008 SP2 /Archives V1.3 for PC-RT v1.3 55 A9XAU311 SIFLA9XAU30101 WinCC flexible 2005 /Audit for PC v1.1 56 A9XAU211 SIFLA9XAU20101 WinCC flexible 2005 /Audit for Panels v1.1 60 A9XSS310 SIFLA9XSS30100 WinCC flexible /Sm@rtService for PC v1.0 61 A9XSS210 SIFLA9XSS20100 WinCC flexible /Sm@rtService for Panel v1.0 62 A9XSA310 SIFLA9XSA30100 WinCC flexible /Sm@rtAccess for PC v1.0 63 A9XSA210 SIFLA9XSA20100 WinCC flexible /Sm@rtAccess for Panel v1.0 67 A9XPA310 SIFLA9XPA30100 WinCC flexible /ProAgent for PC v1.0 68 A9XPA210 SIFLA9XPA20100 WinCC flexible /ProAgent for Panel v1.0 69 A9XOP310 SIFLA9XOP30100 WinCC flexible /OPC-Server for PC v1.0 WinCC flexible 2008 SP2 /Recipes V1.3 for v1.3 PC-RT © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 395 70 A9XOP210 SIFLA9XOP20100 WinCC flexible /OPC-Server for MP v1.0 71 A9XCI310 SIFLA9XCI30100 v1.0 72 A9XCC110 SIFLA9XCC10100 WinCC flexible/ChangeControl V1.0 Advanced v1.0 73 A9XAR310 SIFLA9XAR30100 WinCC flexible/Archives V1.0 for PC-RT v1.0 WinCC flexible/Recipes V1.0 for PC-RT SIFLA9XEP11100 WinCC flexible Advanced combo for use with WinCC flexible 2008 and WinCC Advanced v11.0 9.43.2 WinCC_Flexible 2007 WinCC Flexible 2007 776 A9XEP11 SIFLA9XEP1010 WinCC flexible 2007 Advanced 2 2 v1.2 777 A9XES11 SIFLA9XES1010 WinCC flexible 2007 Standard 2 2 v1.2 778 A9XEC11 SIFLA9XEC101 2 01 v1.2 779 A9XEP21 SIFLA9XEP2010 WinCC flexible 2007 ASIA Advanced 2 2 v1.2 780 A9XES21 SIFLA9XES2010 WinCC flexible 2007 ASIA Standard 2 2 v1.2 781 A9XEC21 SIFLA9XEC201 2 02 WinCC flexible 2007 ASIA Compact v1.2 782 A9XRP31 SIFLA9XRP3010 WinCC flexible 2007 Runtime (2048) 2 2 v1.2 783 A9XRP21 SIFLA9XRP2010 WinCC flexible 2007 Runtime (512) 2 2 v1.2 784 A9XRP11 SIFLA9XRP1010 WinCC flexible 2007 Runtime (128) 2 2 v1.2 785 A9XCC1 SIFLA9XCC101 WinCC flexible/ChangeControl V1.2 12 02 v1.2 55 A9XAU3 SIFLA9XAU301 WinCC flexible 2005 /Audit for PC 11 01 v1.1 56 A9XAU2 SIFLA9XAU201 WinCC flexible 2005 /Audit for Panels 11 01 v1.1 60 A9XSS31 SIFLA9XSS3010 WinCC flexible /Sm@rtService for PC v1.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 WinCC flexible 2007 Compact 396 EKB Installer 0 0 61 A9XSS21 SIFLA9XSS2010 WinCC flexible /Sm@rtService for Panel 0 0 v1.0 62 A9XSA31 SIFLA9XSA301 0 00 WinCC flexible /Sm@rtAccess for PC v1.0 63 A9XSA21 SIFLA9XSA201 0 00 WinCC flexible /Sm@rtAccess for Panel v1.0 67 A9XPA31 SIFLA9XPA301 0 00 WinCC flexible /ProAgent for PC v1.0 68 A9XPA21 SIFLA9XPA201 0 00 WinCC flexible /ProAgent for Panel v1.0 69 A9XOP3 10 SIFLA9XOP301 WinCC flexible /OPC-Server for PC 00 v1.0 70 A9XOP2 10 SIFLA9XOP201 WinCC flexible /OPC-Server for MP 00 v1.0 71 A9XCI31 SIFLA9XCI3010 WinCC flexible/Recipes V1.0 for PC-RT 0 0 v1.0 72 A9XCC1 SIFLA9XCC101 WinCC flexible/ChangeControl V1.0 Advanced 10 00 v1.0 73 A9XAR3 10 v1.0 SIFLA9XAR301 WinCC flexible/Archives V1.0 for PC-RT 00 9.43.3 WinCC_Flexible 2005 49. 50. 51. 52. 53. 54. 55. 56. 60. 61. 62. 63. 67. 68. 69. 70. 71. 72. 73. A9XEP111 SIFLA9XEP10101 A9XES111 SIFLA9XES10101 A9XEC111 SIFLA9XEC10101 A9XRP311 SIFLA9XRP30101 A9XRP211 SIFLA9XRP20101 A9XRP111 SIFLA9XRP10101 A9XAU311 SIFLA9XAU30101 A9XAU211 SIFLA9XAU20101 A9XSS310 SIFLA9XSS30100 A9XSS210 SIFLA9XSS20100 A9XSA310 SIFLA9XSA30100 A9XSA210 SIFLA9XSA20100 A9XPA310 SIFLA9XPA30100 A9XPA210 SIFLA9XPA20100 A9XOP310 SIFLA9XOP30100 A9XOP210 SIFLA9XOP20100 A9XCI310 SIFLA9XCI30100 A9XCC110 SIFLA9XCC10100 A9XAR310 SIFLA9XAR30100 WinCC flexible 2005 Advanced WinCC flexible 2005 Standard WinCC flexible 2005 Compact WinCC flexible 2005 Runtime (2048) WinCC flexible 2005 Runtime (512) WinCC flexible 2005 Runtime (128) WinCC flexible 2005 /Audit for PC WinCC flexible 2005 /Audit for Panels WinCC flexible /Sm@rtService for PC WinCC flexible /Sm@rtService for Panel WinCC flexible /Sm@rtAccess for PC WinCC flexible /Sm@rtAccess for Panel WinCC flexible /ProAgent for PC WinCC flexible /ProAgent for Panel WinCC flexible /OPC-Server for PC WinCC flexible /OPC-Server for MP WinCC flexible/Recipes V1.0 for PC-RT WinCC flexible/ChangeControl V1.0 Advanced WinCC flexible/Archives V1.0 for PC-RT SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Key list 397 9.43.4 WinCC_Flexible 2004 57. 58. 59. 60. 61. 62. 63. 64. 65. 66. 67. 68. 69. 70. 71. 72. 73. A9XEP110 A9XES110 A9XEC110 A9XSS310 SIFLA9XSS30100 A9XSS210 SIFLA9XSS20100 A9XSA310 SIFLA9XSA30100 A9XSA210 SIFLA9XSA20100 A9XRP310 A9XRP210 A9XRP110 A9XPA310 SIFLA9XPA30100 A9XPA210 SIFLA9XPA20100 A9XOP310 SIFLA9XOP30100 A9XOP210 SIFLA9XOP20100 A9XCI310 SIFLA9XCI30100 A9XCC110 SIFLA9XCC10100 A9XAR310 SIFLA9XAR30100 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 WinCC flexible 2004 Advanced WinCC flexible 2004 Standard WinCC flexible Compact V1.0 WinCC flexible /Sm@rtService for PC WinCC flexible /Sm@rtService for Panel WinCC flexible /Sm@rtAccess for PC WinCC flexible /Sm@rtAccess for Panel WinCC flexible RT prof. 2048 Tags V1 WinCC flexible 2004 Runtime, 512 WinCC flexible 2004 Runtime, 128 WinCC flexible /ProAgent for PC WinCC flexible /ProAgent for Panel WinCC flexible /OPC-Server for PC WinCC flexible /OPC-Server for MP WinCC flexible/Recipes V1.0 for PC-RT WinCC flexible/ChangeControl V1.0 Advanced WinCC flexible/Archives V1.0 for PC-RT SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI SIMATIC HMI Top Level Intro This page is printed before a new top-level chapter starts Part X 400 10 EKB Installer Simatic Serial Number Siemens Sinutrain v6.03 (Win Xp Mit Servicepack 1) no serial - please shared.txt Here is your Serial: 02105876-FD-S1-0441-302018903 If you have a License-Key, the Time is right to share that!! ЮЭFRE:11667112-F3-S5-3074-304828774 10.1 Step5 Step5 v7.12 ID:KHE 0074034506 Install key whit this number - see License Number 10.2 Step7 Example ID KHE 10.3 v5.2 (10 symbols) 0420070102 v5.3 (20 symbols) 00401000002007001002 Sinutrain Siemens Sinutrain v6.03 (Win Xp Mit Servicepack 1) Here is your Serial: 02105876-FD-S1-0441-302018903 or 11667112-F3-S5-3074-304828774 Sinutrain v6.3 02270089-FD-S1-421-303055289 10.4 Simocode Win-SIMOCODE-DP/ Smart V1.3 and Win-SIMOCODE-DP/ Professional V1.3 Serial number: 20834-0001-000133 SIMOCODE ES Professional 2004 + SP1 Serial number: 20844-0001-000133 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Simatic Serial Number 10.5 401 WinAC RTX Serial number for instal WinAC RTX 2005 with Ardence RTX RT & SDK PAC PAC# 5224-PAC-00477-72153-89411 email: winac@siemens.com Download v6.5SP1 RTX SDK from www.ardence.com if you program with WinAC ODK v4.1 for RTX Use the same email and PAC# get hotfix 3 for WinAC RTX 2005 SP1 from Siemens web site: http://support.automation.siemens.com/WW/llisapi.dll/csfetch/15227402/ WinAC_RTX_2005_SP1_HF3.exe?func=cslib.csFetch&nodeid=24120918 10.6 WinCC WinCC Update V6.0->V6.0 SP2 -> V6.2 Serial number: 12345-1234-123456 10.7 DriveES No need key and serial number. 10.8 Sybase SQL Anywhere Sybase SQL Anywhere v7 CEPCKDQQREAA000446118233 10.9 Help&Manual http://www.HelpAndManual.com Help&Manual v4.2.0.1062 December 11, 2006 Compiler/Decompiler for help files after installing Menu Help>Enter Serial number: HM4-JKJGEL-WJPH-VLBX9J SC3813 and install MS Help compilers MS HLP Help compiler: http://download.ec-software.com/hcw403_setup.zip MS CHM Help compiler: http://msdn.microsoft.com/library/default.asp?url=/library/en-us/htmlhelp/html/ hwMicrosoftHTMLHelpDownloads.asp © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 402 EKB Installer For install Microsoft Help 2.0 compiler http://msdn.microsoft.com/library/default.asp?url=/library/en-us/htmlhelp/html/ hwMicrosoftHTMLHelpDownloads.asp Russian forum http://forum.ru-board.com/topic.cgi?forum=5&topic=3792&start=0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Top Level Intro This page is printed before a new top-level chapter starts Part XI 404 11 EKB Installer Simatic IT Simatic IT v6.1 SP1 Production Suite is the pure plant-centric solution, covering the ISA-95 issue. for installation also required ALM license keys BusinessObjects_Enterprise_610_oem_123456.signed.key.xml is binary file placed in MIME format. BusinessObjects_Enterprise_610_oem_12345.signed.key is XML file placed in MIME format. English Copy contents of page in the clipboard. Russian Скопируйте содержимое страницы в буфер обмена. English Open text editor Notepad and insert the text from the clipboard. Necessarily remove empty lines. Between lines there should not be breaks. Russian Откройте текстовый редактор Notepad и вставьте текст из буфера обмена. Обязательно удалите лишние пустые строки. Между строками не должно быть разрывов. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Simatic IT English Save a file under name KeyName.eml Press a file and take an investment.. Russian Сохраните файл под именем Key.eml Нажмите на файл и извлеки вложение. English Click a file and save an attachment.. Russian Нажмите на файл и извлеки вложение. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 405 406 EKB Installer file BusinessObjects_XXXXXXXXXXXXXXXXXXXXXXX.signed.key.xml Quote: Dear Customer, Please find enclosed your BusinessObjects Enterprise 6.1b license key file. IMPORTANT NOTICES : Due to some firewall rules, attached files can be automatically renamed when you receive it. The BusinessObjects license key file MUST have the ".signed.key.xml" extension in order to be recognized at the product installation. If not the case please rename the file with the proper extension (i.e. BusinessObjects_XXXXXXXXXXXXXXXXXXXXXXX.signed.key.xml) This mail has two attached files. The BusinessObjects_Enterprise_610_oem_***.signed.key.xml is the signed license key file for Business Objects. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Simatic IT 407 But as some gateways may corrupt the .xml file, a gzipped file including the same license key has been attached to this mail. If the .xml is not recognized, you may try with the one included in the .gz file. For the BusinessObjects installation program to complete successfully you are required to point to the location of the license file. (Refer to Installation Guide) Do not modify this file as it is digitally signed and consequently may not work if modified. This license file is in accordance with the terms and conditions of the software license agreement applicable to products of Business Objects as signed between Business Objects or its authorized agent and Licensee. This file shall not be shared or distributed outside of your organization. 11.1 BusinessObjects_Enterprise_610_oem_76739.signed.key.xml MIME-Version: 1.0 Content-Type: application/octet-stream; name="BusinessObjects_Enterprise_610_oem_76739.signed.key. Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="BusinessObjects_Enterprise_610_oem_76739.signed.key.xml PGxpY2Vuc2UgbGlicmFyeVZlcnNpb249IjYuMC4wLjAiIHZlcnNpb249IjEuMSIgc2lnbmF0dXJl PSJuY3NheWN0Y3NkZ2NhY3Vib2JpYmNid2FxYWthZWF1am9qaWpjandpcWlraWVpeWhzaG1oZ2hh aHVnb2dpZ2Nnd2ZxZmtmZWZ5ZXNlbWVnZWFldWRvZGlkY2R3Y3Fja2NlY3lic2JtYmdiYWJ1YW9h aWFjYXNqbWpnamFqdWlvaWlpY2l3aHFoa2hlaHlnc2dtZ2dnYWd1Zm9maWZjZndlcWVrZWVleWRz ZG1kZ2RhZHVjb2NpY2Njd2JxYmtiZWJ5YXNhbWFnYWFhcWpramVqeWlzaW1pZ2lhaXVob2hpaGNo d2dxZ2tnZWd5ZnNmbWZnZmFmdWVvZWllY2V3ZHFkIj4NCgk8Y3VzdG9tZXJJbmZvcm1hdGlvbj4N CgkJPGxlZ2FsTWVudGlvbj5UaGlzIGxpY2Vuc2UgZmlsZSBpcyBpbiBhY2NvcmRhbmNlIHdpdGgg dGhlIHRlcm1zIGFuZCBjb25kaXRpb25zIG9mIHRoZSBzb2Z0d2FyZSBsaWNlbnNlIGFncmVlbWVu dCBhcHBsaWNhYmxlIHRvIHByb2R1Y3RzIG9mIEJ1c2luZXNzIE9iamVjdHMgYXMgc2lnbmVkIGJl dHdlZW4gQnVzaW5lc3MgT2JqZWN0cyBvciBpdHMgYXV0aG9yaXplZCBhZ2VudCBhbmQgTGljZW5z ZWUuIFRoaXMgZmlsZSBzaGFsbCBub3QgYmUgc2hhcmVkIG9yIGRpc3RyaWJ1dGVkIG91dHNpZGUg b2YgeW91ciBvcmdhbml6YXRpb24uPC9sZWdhbE1lbnRpb24+DQoJCTxjb21wYW55TmFtZT5TSUVN RU5TIEFHPC9jb21wYW55TmFtZT48dXNlck5hbWU+U0lNQVRJQyBJVCBSZXBvcnQgTWFuYWdlcjwv dXNlck5hbWU+PHVzZXJFbWFpbD5saWNlbnNlcy5zaW1hdGljLWl0QHNpZW1lbnMuY29tPC91c2Vy RW1haWw+PGtleUlkPjc2NzM5PC9rZXlJZD48bGljZW5zZVR5cGU+b2VtPC9saWNlbnNlVHlwZT48 Y3JlYXRpb25EYXRlPjgvNS8wNCA1OjAzOjM1IFBNPC9jcmVhdGlvbkRhdGU+PGNvbW1lbnQ+VGhp cyBpcyBhbiBPRU0ga2V5PC9jb21tZW50Pjxjb21tZW50Mj5TSU1BVElDIElUIFJlcG9ydCBNYW5h Z2VyIGVtYmVkcyBhIEJ1c2luZXNzT2JqZWN0cyBsaWNlbnNlIHdoaWNoIGlzIGV4Y2x1c2l2ZWx5 IHZhbGlkIGZvciByZXBvcnRpbmcgb24gdGhlIFNJTUFUSUMgSVQgZGF0YXNvdXJjZXMgX1NJTUFU SUMgSVQgUHJvZHVjdGlvbiBTdWl0ZSwgU0lNQVRJQyBJVCBIaXN0b3JpYW4sIFNJTUFUSUMgSVQg VW5pbGFiLCBTSU1BVElDIElUIEludGVyc3BlYywgU0lNQVRJQyBJVCBTZXJ2ZXJfIG9mIHRoZSBT SU1BVElDIElUIF9wcm9jZXNzLSBhbmQgZmFjdG9yeSBhdXRvbWF0aW9uXyBhcHBsaWNhdGlvbi4g © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 408 EKB Installer QW55IG90aGVyIHVzZSBvZiBCdXNpbmVzc09iamVjdHMgcmVxdWlyZXMgYWRkaXRpb25hbCBsaWNl bnNlcy48L2NvbW1lbnQyPjxwcm9jZXNzPk9FTTwvcHJvY2Vzcz48cHJvZHVjdE5hbWU+QnVzaW5l c3NPYmplY3RzIEVudGVycHJpc2UgNi4xYjwvcHJvZHVjdE5hbWU+PHByb2R1Y3RWZXJzaW9uPjYx YjwvcHJvZHVjdFZlcnNpb24+PC9jdXN0b21lckluZm9ybWF0aW9uPg0KCTxwdXJjaGFzZWRQcm9k dWN0cz4NCgkJPHByb2R1Y3QgaWQ9ImJvLkJ1c2luZXNzT2JqZWN0c1JlcG9ydGVyIiBuYlVzZXJz PSI5OTkiIG5iU2VydmVycz0iIi8+PHByb2R1Y3QgaWQ9ImJvLjNUaWVyQnVzaW5lc3NPYmplY3Rz IiBuYlVzZXJzPSIzOTk2IiBuYlNlcnZlcnM9IiIvPjxwcm9kdWN0IGlkPSJiby5CdXNpbmVzc09i amVjdHMiIG5iVXNlcnM9IjM5OTYiIG5iU2VydmVycz0iIi8+PHByb2R1Y3QgaWQ9ImJvLkRpc3Ry aWJ1dGlvbiIgbmJVc2Vycz0iMzk5NiIgbmJTZXJ2ZXJzPSIiLz48cHJvZHVjdCBpZD0iYm8uQnVz aW5lc3NPYmplY3RzRXhwbG9yZXIiIG5iVXNlcnM9Ijk5OSIgbmJTZXJ2ZXJzPSIiLz48cHJvZHVj dCBpZD0iYm8uQnVzaW5lc3NRdWVyeSIgbmJVc2Vycz0iOTk5IiBuYlNlcnZlcnM9IiIvPjxwcm9k dWN0IGlkPSJiby5EZXNpZ25lciIgbmJVc2Vycz0iOTk5IiBuYlNlcnZlcnM9IiIvPjxwcm9kdWN0 IGlkPSJiby5TdXBlcnZpc29yIiBuYlVzZXJzPSI5OTkiIG5iU2VydmVycz0iIi8+PHByb2R1Y3Qg aWQ9ImJvLkNvbmZpZ1Rvb2wiIG5iVXNlcnM9IjI5OTciIG5iU2VydmVycz0iIi8+PHByb2R1Y3Qg aWQ9ImJvLkluZm9WaWV3IiBuYlVzZXJzPSI5OTkiIG5iU2VydmVycz0iIi8+PHByb2R1Y3QgaWQ9 ImJvLlNlcnZlckJhY2tFbmQiIG5iVXNlcnM9IjE5OTgiIG5iU2VydmVycz0iIi8+PHByb2R1Y3Qg aWQ9ImJvLkFkbWluQ29uc29sZSIgbmJVc2Vycz0iMTk5OCIgbmJTZXJ2ZXJzPSIiLz48cHJvZHVj dCBpZD0iYm8uV2ViSW50ZWxsaWdlbmNlIiBuYlVzZXJzPSIyOTk3IiBuYlNlcnZlcnM9IiIvPjxw cm9kdWN0IGlkPSJiby5XZWJJbnRlbGxpZ2VuY2VSZXBvcnRlciIgbmJVc2Vycz0iOTk5IiBuYlNl cnZlcnM9IiIvPjxwcm9kdWN0IGlkPSJiby5XZWJJbnRlbGxpZ2VuY2VFeHBsb3JlciIgbmJVc2Vy cz0iOTk5IiBuYlNlcnZlcnM9IiIvPjxwcm9kdWN0IGlkPSJiby5CQ0FTY2hlZHVsZXIiIG5iVXNl cnM9Ijk5OSIgbmJTZXJ2ZXJzPSIiLz48cHJvZHVjdCBpZD0iYm8uQkNBQ29uc29sZSIgbmJVc2Vy cz0iOTk5IiBuYlNlcnZlcnM9IiIvPjxwcm9kdWN0IGlkPSJiby5Ccm9hZGNhc3RBZ2VudCIgbmJV c2Vycz0iOTk5IiBuYlNlcnZlcnM9IiIvPjxwcm9kdWN0IGlkPSJiby5yZGJtcy5PcmFjbGVDbGll bnQiIG5iVXNlcnM9Ijk5OSIgbmJTZXJ2ZXJzPSIiLz48cHJvZHVjdCBpZD0iYm8ucmRibXMuT3Jh Y2xlIiBuYlVzZXJzPSI5OTkiIG5iU2VydmVycz0iIi8+PHByb2R1Y3QgaWQ9ImJvLnJkYm1zLk1T U1FMU2VydmVyT0RCQyIgbmJVc2Vycz0iOTk5IiBuYlNlcnZlcnM9IiIvPjxwcm9kdWN0IGlkPSJi by5yZGJtcy5JQk1EQjJDbGllbnQiIG5iVXNlcnM9IiIgbmJTZXJ2ZXJzPSIiLz48cHJvZHVjdCBp ZD0iYm8ucmRibXMuSUJNREIyIiBuYlVzZXJzPSIiIG5iU2VydmVycz0iIi8+PHByb2R1Y3QgaWQ9 ImJvLnJkYm1zLklCTURCMk9EQkMiIG5iVXNlcnM9IiIgbmJTZXJ2ZXJzPSIiLz48cHJvZHVjdCBp ZD0iYm8ucmRibXMuU3liYXNlT3BlbkNsaWVudCIgbmJVc2Vycz0iIiBuYlNlcnZlcnM9IiIvPjxw cm9kdWN0IGlkPSJiby5yZGJtcy5TeWJhc2UiIG5iVXNlcnM9IiIgbmJTZXJ2ZXJzPSIiLz48cHJv ZHVjdCBpZD0iYm8ucmRibXMuU3liYXNlT0RCQ0lRIiBuYlVzZXJzPSIiIG5iU2VydmVycz0iIi8+ PHByb2R1Y3QgaWQ9ImJvLnJkYm1zLkluZm9ybWl4T0RCQyIgbmJVc2Vycz0iIiBuYlNlcnZlcnM9 IiIvPjxwcm9kdWN0IGlkPSJiby5yZGJtcy5JbmZvcm1peCIgbmJVc2Vycz0iIiBuYlNlcnZlcnM9 IiIvPjxwcm9kdWN0IGlkPSJiby5yZGJtcy5SZWRCcmlja09EQkMiIG5iVXNlcnM9IiIgbmJTZXJ2 ZXJzPSIiLz48cHJvZHVjdCBpZD0iYm8ucmRibXMuUmVkQnJpY2siIG5iVXNlcnM9IiIgbmJTZXJ2 ZXJzPSIiLz48cHJvZHVjdCBpZD0iYm8ucmRibXMuVGVyYWRhdGFPREJDIiBuYlVzZXJzPSIiIG5i U2VydmVycz0iIi8+PHByb2R1Y3QgaWQ9ImJvLnJkYm1zLlRlcmFkYXRhIiBuYlVzZXJzPSIiIG5i U2VydmVycz0iIi8+PHByb2R1Y3QgaWQ9ImJvLnJkYm1zLk9EQkMyIiBuYlVzZXJzPSIiIG5iU2Vy dmVycz0iIi8+PHByb2R1Y3QgaWQ9ImJvLnJkYm1zLk9EQkMiIG5iVXNlcnM9IiIgbmJTZXJ2ZXJz PSIiLz48cHJvZHVjdCBpZD0iYm8ucmRibXMuT0RCQzMiIG5iVXNlcnM9IiIgbmJTZXJ2ZXJzPSIi Lz48L3B1cmNoYXNlZFByb2R1Y3RzPg0KCTxwcm9kdWN0TGluZVJlZiByZWY9ImJvLnBsLnN1aXRl IiBkaXNwbGF5TmFtZT0iQnVzaW5lc3NPYmplY3RzIEVudGVycHJpc2UgNiIgdmVyc2lvbj0iNi4x LjAyMS4yMjYxIiBtaW5WZXJzaW9uPSIiLz48L2xpY2Vuc2U+ 11.2 BusinessObjects_Enterprise_610_oem_134495.signed.key.xml MIME-Version: 1.0 Content-Type: application/octet-stream; name="BusinessObjects_Enterprise_610_oem_134495.signed.key Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="BusinessObjects_Enterprise_610_oem_134495.signed.key.xm H4sICAeOtkIAC0J1c2luZXNzT2JqZWN0c19FbnRlcnByaXNlXzYxMF9vZW1fMTM0NDk1LnNpZ25l ZC5rZXkueG1sAN1YTZPaOBA9J1X7H1S+x3wOW5syrsDAgSrYyQxscpblNu7BlhxJHkJ+fdoCzxJm MgUHc0jBAUmv+3W/bgvJQYYCpAGWYaS53n0BbVDJoTfw29XHY0/1TMfveMzgWnJbahh6SvA0T1Ke PkLKH3m0FQbUeoMbvhYCdkmZfnv8FuUxJn/muhf+9f5dIEpjVQ56JhOlc25Jqmr+XZDBmmcLkG5m laJhtdQJZsBojJJxIZSOuRTAtmhTZlNgFnRuGJcxE0rGWNkbphK3ZlRit1zDsy++1gA5sTBeFDTJ © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Simatic IT I/JtFSu0ikthneG4NCjBGHYXPUI1x42rI8QsArsFkC8hSjOskKVNlcYfBOVrx0Jhzffc4DOXlkvH pDzLmFSWXFYDTRbkI0ZjNUalrYalNRhDFdFOlZqW11ziDyeZH7R+0cspKFRecLn7l+cQLrHSVrDZ ij1AobRlCy4pJM2oLYPWMTQoDehpzjELDyoZ3+zNP6D9ZLDSy/hkErT+hwYb2M3isNPr9/+5CVr7 UXBwsNoVECogg+OJQGhw0U+4hXDQ6rbp275hnfbH3uBj+282WlBkx5gqpapY+37AqsrsbrpgxOZy cGsB1U5QLUJaCVr1IDhU1KVYl6uu1lRS0xQaqSEGfidyVs/g2vLwaIeDI0A9R+yv93FQlFqk3ED8 +dBR+9oc7BnGQy9S/klA+xKB9piM/iOJDe0e1e8l6Cc38limtqBXmMMcc7RDj5Trt/udG4+VRXG6 MmgPem2vFZ7S9lYI+oT7iLPfBOeV6Sb1E0QFuXJq0+9FpnTzVaxp70vQu6bJJuC2vsaTWpYEfUKj Gme6VTLB9Uqp7Iip1wRTtTd8Qdg2rp3zN+ZiM5XxEVm3CbJRnKMkDY3KoGmurxDNaKvOMqQ/UwFN 1+uE7lq78gnt1baR29FSpBCX2VW4XrZMM0xa8VhwY0fV+atpNh1HufHvNBcZ3GZ4ZcbrcC2Wy/v5 3vXdZHzbNKkBUWq0O38+GX2+Ftl1lJyNF5Nx9xeut6GvtNTbBi8K9Fu4O7bi94vAZ3s/bpn5dDI+ y+hs7xXwPBUrZO8s5APEY41icxH47IiXu4iuBBdAK8+z+0sMCpAXdMsKNI+55ReBX0u39ep9p/Yz p3PqAyRMQ+L8FZlvSrSkBF10i4y7C+jQe+t6dvRCha5qfrvb8bvdAT2kdAp5fvniIjlcNcOf/cKo rqMRAAA= © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 409 Top Level Intro This page is printed before a new top-level chapter starts Part XII 412 12 EKB Installer FAQ official How do you store licenses on a server and protect them from unauthorized access? How can you deactivate the Trial License when the message appears indicating that the Trial License has expired, although the Floating License has been installed? How can you keep SIMATIC license files working and avoid loss of authorization? How do you install, uninstall and upgrade authorizations? How can you open the Automation License Manager when the message "No connection to the License Key Handler" appears? What options are there for transferring a license key to a PC without floppy disk drive? How can you use license keys that are located on a central computer (server) on a local computer? How can you install the Automation License Manager when the installation in Windows 2000 is aborted with the message "Server service not active"? What is the difference between authorizations and license keys? Request for recovering authorizations of SIMATIC Industrial Software STEP 7 V5.3 - User authorization by the Automation License Manager Difference between ALM and SIMATIC Logon STEP 7 V5.3 - notes on using STEP 7 License Keys License concept PCS 7 V8.0 12.1 How do you store licenses on a server and protect them from unauthorized access? Description: With the new Automation License Manager "ALM" V3.0 you can manage the floating license online. The license keys are stored on a central computer that serves as server computer. The SIMATIC Logon add-on package must also be installed. Using Logon you can conveniently control the use of your licenses on the local computer or on computers in a workgroup. Unauthorized access to licenses is prevented by a logon dialog and user administration. If there is no corresponding license available locally, you can use the license from the license key server. If there is a connection failure to the server you can continue working for three hours without any problems. After three hours you get the message that there is no license key available on the computer. In addition, the ALM on the server reserves the license for the computer for three hours in the case of power failure. If the connection is not restored after three hours, the Automation License Manager releases the license again for every user. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 413 License Key in the Network Advantages: Central storage of the license keys on one PC Automatic assignment and release of the keys Central management (e.g. upgrades etc.) Central logging of the license key activities 1. Enable remote access for the license keys on the the license server via the ALM under "File > Settings". 2. Now go to your workstation computer and close all the SIMATIC applications. 3. Log on to the local computer via "File > Change Logon" of the Automation License Manager. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 414 EKB Installer 4. If not available, add the license computer via "Edit > Connect computer" on your local computer. 5. Check the setting in the ALM with the menu command "File > Settings > Favorites". The license © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official server "Mess-1" must be entered here. 6. Now you can use the license of the license server. User Management with Logon Advantages: One tool for all types of license Simple license management Display of missing software licenses Differentiated administration of rights for individual users Uniform administration of rights from one license server is possible Logging of all license key activities (e.g. usage, transfer ...) 1. Open the SIMATIC Logon Service via "File > Change Logon" and log on. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 415 416 EKB Installer 2. Open the "SIMATIC Logon Admin Tool" dialog via "File > User Management". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 417 3. Right-click "Roles" and create a new role in the pop-up menu. 4. Under the new "ALM-PG3" role select "Groups and Users" and edit them. 5. Now select the required rights and copy them via drag-and-drop into the top right window. Save the changes and then log on with the new role logon. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 418 EKB Installer 6. Now it is no longer permissible to transfer the license, because there aren't the rights required. The administrator can assign this rights via the Admin tool. The licenses can be used by any registered user, but cannot be moved. Tools used: Automation License Manager V3.0 SIMATIC Logon with Administration Tool for User Management V1.3 SP1 12.2 How can you deactivate the Trial License when the message appears indicating that the Trial License has expired, although the Floating License has been installed? http://support.automation.siemens.com/WW/view/en/24200966 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 419 How can you deactivate the Trial License when the message appears indicating that the Trial License has expired, although the Floating License has been installed? Instructions: Once activated the Trial License is valid for limited use up to a maximum of 14 days of the SIMATIC Software for tests, for example. If after expiry of this time you install a license for unlimited use (Single, Floating or Upgrade License) and after installation you still receive the message indicating that the Trial License has expired, we recommend deleting the Trial License in the "AX NF ZZ" folder. Procedure for deleting a Trial License 1. Open the ALM in MS Windows via "Start > SIMATIC > License Management > Automation License Manager" and mark the drive (e.g. "C") on which your licenses are installed. Displayed in the right window of the Automation License Manager is the table of the licenses installed. For viewing the licenses you need the file name (License Key) and the 20-digit license number. If these columns are not yet displayed, then via "View > Define..." you open the "Define View" dialog. In the bottom section of this dialog you select the "Columns" tab and then "License key" and "License number". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 420 EKB Installer Fig. 01 Then you enter a name under "Edit view" and click the "Apply" button. Acknowledge with OK and the "License key" and "License number" columns appear in the Automation License Manager. 2. In the Explorer you mark the "AX NF ZZ" directory on your hard disk or on drive "C", so that the file names of the licenses are displayed in the right window of the Explorer. If the "AX NF ZZ" directory or the files in that directory are not visible, then open the dialog "Tools > Folder options..." and select the "View" tab: Here you deactivate the option "Hide protected operating files (Recommended)" and Activate the option "Show hidden files and folders". Then click on the "Apply" button and acknowledge with "OK". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 421 Fig. 02 The "AX NF ZZ" directory is then displayed in the Explorer. 3 Now in the Automation License Manager compare the file name (License Key) of the Trial License with the file name in the "AX NF ZZ" folder. Via the view set in the Automation License Manager you determine the file name for the Trial License to be deleted (Fig. 03) that you then find in the "AX NF ZZ" folder. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 422 EKB Installer Fig. 03 4 Mark the Trial License found in the "AX NF ZZ" directory and right-click. Then select "Delete" in the pop-up menu that opens. After deletion the message described above will no longer appear. But need also: Removal of Trial keys and their traces 12.3 How can you keep SIMATIC license files working and avoid loss of authorization? http://support.automation.siemens.com/WW/view/en/23175058 Instructions: Authorizations and License Keys from Siemens for the SIMATIC software are copy protected and can only be managed with a SIMATIC handling program (see table). In the original the keys are supplied exclusively on commercially available yellow and red floppy disks with individual ID features (ID:KHE and Lic-No.). This ID is also to be found for the authorizations and license keys that are displayed in the handling program so that they can be assigned to their original floppy disks in each case. Normally the handling program supplied with the software or on the floppy disk is best suited in each case. In an emergency, it might help to install the latest version concerned (exception: DOS and Windows authorizations). Please also refer here to the installation instructions regarding the system requirements that are included with software requiring authorizations and licenses. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 423 A difference is made between the following license procedures: MS-DOS authorization (DOS authorization) Windows authorization (authorization) Windows License Key ([Floating/Single/Rental/Upgrade] License Key) Procedure Optimum handling program ID In the handling program DOS authorization Authors.exe © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Serial number I D f o r m a t On floppy disk ( n u m e r i c a l ) ID:KHE (tw.without) s e p a r a t e d w i t h ' ' 424 EKB Installer Authorization AuthorsW Serial number ID:KHE License Key ALM (Automation License Manager) License number Lic-No. 1 0 d i g i t s 2 0 d i g i t s General requirements: In Windows NT, 2000 and XP you need Administrator or at least standard user rights and access rights to the target drive and to the source drive. For this we recommend internal floppy disk drives. The table below gives a few instructions for handling authorizations and license keys in order to avoid the loss of license files. Instructions for handling authorizations and license keys Before formatting, compressing or restoring the drive or before installing a new operating system please save the authorizations and license keys. You must transfer the authorizations from the hard disk back onto the authorization floppy disk. You can save the license keys on the original floppy disk or on USB sticks, for example. When you uninstall, install, move or upgrade keys, you should first close all the background applications visible in the taskbar. Optimization programs must not affect authorizations and license keys and cannot repair them. This applies in particular for Anti-virus programs; scanning functions like Autoprotect should be disabled at least © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 425 temporarily. Defragmenting of hard disks. Scandisk up to Windows 2000, Checkdisk for Windows XP. Repartitioning of the hard disk / partition. Compressing and restoring. Before you use optimization programs or reload a hard disk backup, please also save the authorizations and license keys. Authorizations and license keys Do not work on compressed drives. In the case of compressed drives (e.g. DBLSPACE) you must install the authorization on the associated host drive. Only work within internal networks (LAN). Never work on read-only media (e.g. CD-ROM). When installing authorizations and license keys, the data is stored in the hidden system directory "AX NF ZZ" of the drive concerned. You must not change the directory's attributes, move the folder or delete the files. If a hard disk backup contains a copy of an authorization, there is the risk that reloading the backup data will overwrite the authorizations that are still valid and thus destroy them. To prevent loss of authorizations through overwriting you must either remove the authorizations before creating a backup or exclude them from the backup. You can copy the files on the authorization floppy disk. However, you cannot use the copies for authorization. For that you need the original authorization floppy disk. The authorization creates a cluster on the target drive, which might be marked as "defective". You must not "repair" this cluster. You can only ever install one authorization of a version on one and the same drive. You can no longer use AuthorsW to uninstall defective authorizations. This might block the installation of new authorizations. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 426 EKB Installer When upgrading you should always follow the instructions provided with the software or the instructions given in the Help of the tools used in each case. 12.4 How do you install, uninstall and upgrade authorizations? http://support.automation.siemens.com/WW/view/en/23174483 Instructions: The following instructions apply for STEP 7 up to and including V5.2 and AuthorsW version V2.4.2 or older. As from STEP 7 V5.3 the license key is installed with the Automation License Manager (ALM). Installing the authorization: When you initially install STEP 7, you are prompted to install the authorization. You can do this during installation of STEP 7 or later. The table below describes how to proceed to install the authorization. No. Procedure 1 Insert the relevant authorization floppy disk when requested during installation of STEP 7 and then acknowledge the request. The authorization is transferred to a physical drive. 2 If you want to install the authorization later, then proceed as follows. After installing STEP 7 you insert the authorization floppy disk into the disk drive and call the "AuthorsW" program via the Windows Start menu: "Start > SIMATIC > AuthorsW > AuthorsW". 3 In the "Transfer Authorizations" tab, from one of the two list fields you select the drive on which the authorization is located (e.g. floppy disk drive). 4 Select the target drive in the other list field. Now all the available authorizations of both drives are shown. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 5 427 Mark the authorization to be transferred and click the "<--" button or the "-->" button according to where the authorization is to be transferred. Then close the dialog field. Upgrading an authorization: he table below describes the requirements and procedure for upgrading an authorization. No. Procedure 1 The following requirements must be fulfilled: The AuthorsW tool must be installed. If AuthorsW is not installed on your computer, you must first install it. The "Setup.exe" of AuthorsW is available on the STEP 7 CD in the directory "AuthorsW/Disk1". The "old authorization" must be located on the associated "old authorization floppy disk". If necessary, first transfer this authorization from your computer back onto the "old authorization floppy disk". The relevant upgrade authorization floppy disk must now be available. 2 Insert the upgrade authorization floppy disk and call the "AuthorsW" program via the Windows Start menu: "Start > SIMATIC > AuthorsW > AuthorsW". Select the menu command "Authorization > Upgrade". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 428 EKB Installer Note: Since the existing authorization is deleted and replaced by a new one during the upgrade, the authorization floppy disk must not be write-protected at any time. 3 Read the instructions displayed and click "OK" to acknowledge. 4 In the "Select Upgrade Program" dialog you select the relevant upgrade program and when request you insert the old authorization floppy disk. You are asked once again whether you really want to upgrade the authorization. If not, this is the last chance to abort the upgrade. After acknowledging the dialog you must not interrupt the process in any way, otherwise the authorization might be damaged. 5 Now, when requested, insert the upgrade floppy disk again. All the necessary requirements are checked and if everything is OK the upgrade finishes by activating the new authorization. Now the new authorization is installed on the drive on which the old authorization was located. Uninstalling authorizations: Please proceed as described below to uninstall authorizations. No. Procedure 1 Insert the authorization floppy disk into the relevant floppy disk drive and open the "AuthorsW" program via the Windows Start menu: "Start > SIMATIC > AuthorsW > AuthorsW". 2 In the "Transfer Authorizations" tab you select the list fields "Source Drive" and "Target Drive" (floppy disk drive). 3 Click the "<--" button or the "-->" button. The authorizations selected are transferred to the drive selected. Note: You can also transfer the authorizations to other hard disks or network drives. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 429 Recovering authorizations If an authorization is defective, please get in touch with your authorization hotline. Telephone Fax E-mail Europe/Africa (0)180 5050 222 (0)180 5050 223 adautorisierung@siemens.com America +1 423 262-2522 +1 423 262-2289 simatic.hotline@sea.siemens.com Asia/Australia +86 1064 757 575 +86 1064 747 474 adsupport.asia@siemens.com You might be able to repair a defective authorization with the menu command "Authorization > Recover". Use this menu item to recover defective authorizations. It is only possible to use this function in agreement with the authorization hotline. Normally you do not need this function. You will be in contact over the phone with the authorization hotline during the entire recovery procedure. Please have the following information at hand when you call the authorization hotline: Authorization : Name of the authorization. Query code : The code that must be given to the authorization hotline. 12.5 How can you open the Automation License Manager when the message "No connection to the License Key Handler" appears? Instructions: The table below describes how to proceed to disable the message described above so that you can open the ALM (Automation License Manager). No. Procedure 1 Make sure that the following tasks have been started on your operating system: Automation License Key Service Server Remote Procedure Call (RPC) For this you open the dialog "Services" in Microsoft Windows XP via "Start > Settings > Control Panel > Performance and Maintenance > Administration > Services" or in Windows 2000 via "Start > Settings > Control Panel > Administration > Services". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 430 EKB Installer Notes on the Windows XP and Windows 2000 operating systems: You get to the "Control Panel" menu Via "Start > Control Panel" (in the Start menu for simplified access to the programs in Windows XP). Via "Start > Settings > Control Panel" (for the classic Start menu as in earlier versions of Windows, e.g. Windows 2000). In the Control Panel menu in Windows XP there are two different views, the Classic View and the Category View. If you select Category View, you have two options for opening the "Services" dialog: First switch to the Classic View and there open the dialog "Services": "Switch to Classic View > Administrative Tools > Services" or in the Category View open the dialog "Services": "Performance and Maintenance > Administration > Services". 2 You can use the "Start" link to start the tasks described above if they have not yet been started. If the "Automation License Key Service" - as in Fig. 01 - doesn't start, check the © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 431 Windows event display. For this you open the "Event Viewer" dialog in Microsoft Windows XP via "Start > Settings > Control Panel > Performance and Maintenance > Administrative Tools > Event Viewer" or in Windows 2000 via "Start > Settings > Control Panel > Administration > Event Viewer". 3 If the error code 0X8007007F appears in the Application protocol of the Event Viewer - as in Fig. 02 - we recommend that you install the Component Checker to check the available version of the (Microsoft Data Access Components) on your PC: http://www.microsoft.com/downloads/details.aspx?FamilyId=8F0A8DF6-4A21-4B43- © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 432 EKB Installer BF53-14332EF092C9&displaylang=en More information on the Microsoft Component Checker is available in the download above. After installing the Component Checker please proceed as follows. 4 Start the Component Checker with the application "cc.exe" and in the dialog that opens you select "Perform analysis of your machine and automatically determine the release version". Then acknowledge with "OK". 5 In the "Choose Analysis Type" you then select "Perform analysis against a selected version". © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 6 If MDAC is correctly installed and registered there is a MATCH for all three points "File Details", "COM Details" and "Registry Details". If there is a MISMATCH, then MDAC (Microsoft Data Access Component) is not correctly installed or registered. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 433 434 EKB Installer 7 We recommend that you install the following Microsoft update on your PC/PG: http://www.microsoft.com/downloads/details.aspx?FamilyID=6c050fe3-c795-4b7d-b037185d0506396c&DisplayLang=de The behavior is cleared upon installation of MDAC Update RTM version V2.8. You can then start the Automation License Key Service. Note: If the message "No connection to the License Key Handler" appears and the Windows Event Viewer shows the error code "0X8004005", the database might be defective. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 8 Please proceed as follows in the case of the error message shown in Fig. 06. Uninstall the ALM (Automation License Manager). Delete the file "almdb.mdb". Reinstall the ALM. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 435 436 12.6 EKB Installer What options are there for transferring a license key to a PC without floppy disk drive? Configuration Notes: For some time now computers have been produced without a floppy disk drive. However, in order to install certain automation software products you need a floppy disk drive to install the license keys supplied on floppy disk. Using the Automation License Manager you can install the licenses on a PC without floppy disk drive as follows. License Key Type Authorization (e.g. STEP 7 V5.2) License Key (e.g. Floating License Key STEP 7 V5.3) External floppy disk drive with USB interface X X USB stick as transfer medium from one computer with floppy disk drive to a computer without floppy disk drive -- X Second computer with floppy disk drive in the company network and transfer via the network X1) X1) Second computer with floppy disk drive and offline transfer (see Help of the Automation License Manager) X1) X1) Transport Medium 1) The Automation License Manager must also be installed on both computers. Note: You can recognize a License Key in the Automation License Manager by the twenty-digit license number. An authorization has a ten-digit license number. What is the difference between authorizations and license keys? 12.7 How can you use license keys that are located on a central computer (server) on a local computer? http://support.automation.siemens.com/WW/view/en/23175038 Instructions: The table below describes the procedure for using license keys that are located on a server on a local computer. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 437 N Procedure o. 1 The Automation License Manager must be installed on the local computer and on the server. 2 Then in the Automation License Manager on the local computer you must connect the server via the menu command Edit > Connect Computer. 3 Now you can use the licenses located on the server. If the connection to the server is interrupted, you can continue to work for another 3 hours before the infobox comes about the missing license. The licenses remain on the server. 4 In order to be able to transfer the license keys from the server to the local PC you must clear the setting "Protect local license keys" on the server. You get to the settings via the menu command File > Customize... . Without the license you get the message "Zugriff verweigert / Access denied". WARNING: If this setting is disabled, anyone connected to the server can download the license keys from the server! © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 438 EKB Installer Notes: The SIMATIC Logon tool, which is to be purchased separately, is available for managing the license keys (access rights etc.). In the "History" tab of the "Customize" dialog you have a display of the computers that are or were connected to the local Automation License Manager. 12.8 How can you install the Automation License Manager when the installation in Windows 2000 is aborted with the message "Server service not active"? http://support.automation.siemens.com/WW/view/en/23173182 Instructions: In Windows 2000 check whether the Server service is disabled in the Control Panel. The table below describes how to proceed to enable the Server service. If the Server is only stopped or terminated, then you can install Automation License Manager without any problem. N Procedure o. 1 In the Control Panel of Windows 2000 open the "Administration" dialog via "Start > Settings > Control Panel > Administration". 2 In the "Administration" dialog you then open "Services". Here, in the "Status" column, you can see whether the Server service is enabled (Status: Started) or not. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 439 3 In the Services" dialog (Fig. 01) you right-click "Server" and in the pop-up menu that opens you select "Properties". 4 Go to the "General" tab in the "Properties of Server" dialog that opens and start the Server service. For this you click on the "Start" button. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 440 EKB Installer You can only start the Server service if it is not disabled, otherwise the "Start" button is grayed out and cannot be activated. In this case click on the "Continue" button. After continuing or starting the server the status "Started" is displayed for the server in the appropriate line in the "Services" dialog (Fig. 01). 5 Close the "Properties of Server" dialog with OK and then you can install the Automation License Manager. Note: In the "Properties of Server" dialog, in the "Dependencies" tab, you can see in the bottom pane (Fig. 03) which system components are dependent on the server. Once the Automation License Manager has been installed, this service also appears in the "Dependencies" tab. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 441 These instructions have been created with STEP 7 V5.3. 12.9 Request for recovering authorizations of SIMATIC Industrial Software http://support.automation.siemens.com/WW/view/en/23322349 QUESTION: Where can I get support for the authorization of SIMATIC Industrial Software? ANSWER: Your contact for the Authorization Hotline in your region is: Telefon Fax email Europe/Africa +49 180 5050 222 +49 180 5050 223 adautorisierung@siemen s.com America Toll Free +1 423-262-2200 simatic.hotline@sea.sie © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 442 EKB Installer + 1 800-333-7421 Outside USA +1 423-262-2522 Asia/Australia +86 10 64 757575 mens.com +86 10 64 747474 adsupport.asia@siemen s.com In many cases, the authorization of SIMATIC Industrial Software requires a red or yellow authorization diskette. If there is a problem with the authorization, you can call the Authorization Hotline for your region via Technical Support. To avoid unnecessary waiting time for you and our hotline, you can download a Request form for the restauration of an authorization and send it to the hotline responsible for your area. To download the latest version of the authorization software, you can find it under entry-ID: 114358. Request form for recovering authorizations (selfextracting file) AuthSuppB_e.exe ( 37 KB ) http://support.automation.siemens.com/WW/llisapi.dll/csfetch/772175/AuthSuppB_e.exe 12.10 What is the difference between authorizations and license keys? What is the difference between authorizations (AuthorsW short keys) and license keys (ALM long keys) ? http://support.automation.siemens.com/WW/view/en/19020864 Configuration Notes: License keys are the new authorizations as from STEP 7 V5.3. With the new license keys we are implementing a new concept in the licensing of SIMATIC software. Whereas the authorizations up to and including STEP 7 V5.2 were valid only for a specific version of the software, the license keys as from STEP 7 V5.3 are automatically also valid for the earlier versions of the same software. This validity however is restricted only to the programs that are licensed with the license keys. For programs licensed with an authorization only the authorization valid for the version continues to be valid. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 443 Another new feature is that license keys can be stored on a network driver and can then be used by various computers (floating license). The options that the SIMATIC world makes available to you with this type of licensing are described in Entry ID 19021092. You can tell from the license number whether a program is protected by an authorization or by a license key. The license number is shown in the Automation License Manager (ALM). An authorization license number has ten digits, a license key license number has twenty digits. Whereas there were earlier only authorizations and emergency authorizations, there are now the following different types of license keys. Notes on authorizations (AuthorsW short keys): Authorizations can only be saved and repaired on the original yellow or red floppy disks and installation is only possible on internal hard disk drives and partitions or network drives, but not on USB sticks. To ensure working with the associated software the authorization must be available locally on the hard disk on which the software is installed. Authorizations cannot be transferred via the Internet nor installed on USB hard disks. Notes on license keys (ALM long keys): License keys cannot be restored on the floppy disks on which they were supplied, but can only be repaired on the PC/PG on which they are actually located. There is no longer an emergency authorization on floppy disk for license keys, because the software is always runnable if a valid license key has already been installed. So if there is a defective license key on the hard disk, working with the software is only interrupted at regular intervals with a message informing you that there is no valid license key available. As from ALM V1.1 SP1 you can also store license keys on USB sticks. A Trial License Key is installed from the CD. It can be activated via the actual SIMATIC application once for 14 days and is for evaluation purposes. You cannot restore or move the Trial License Key. Software products that are released for utilization with license keys can also use newer license keys. More information on this is also available in the Online Help of the Automation License Manager under Notes on utilizing "older" software versions. See also: Type of key 12.11 STEP 7 V5.3 - User authorization by the Automation License Manager http://support.automation.siemens.com/WW/view/en/23174056 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 444 EKB Installer QUESTION: What do I have to take into consideration when using the STEP 7-Programming software in connection with the new Automation License Manager? ANSWER: To use the STEP 7-Programming software, a product-specific License Key (User autorization) is required whose installation is executed as per STEP 7 V5.3 by means of the Automation License Manager. The Automation License Manager is a Software-Product of the SIEMENS AG. It is used between various systems to handle the License Keys (technical representatives of Licenses). The Automation License Manager can be found: on the installation medium of the corresponding Software Product, for which a License Key is required or on a separate installation medium. The Automation License Manager includes an Online-Help allowing you to call it context-related via the F1-key or via the menu task Help > Help on License Manager after its installation. By means of that help you obtain detailed information regarding functionality and handling of the Automation License Manager. Licenses To use license-protected program packages of STEP 7, licenses are required. A license serves as legal title to use products. The representatives of this title are as follows: the CoL (Certificate of License) and the License Key. Certificate of License (CoL) The "Certificate of License" that is co-supplied along with the product itself, is the legal evidence of the title of use. The according product may only be used by the owner of CoL or authorized persons. License Keys The License Key is the technical representative of a license (electronic License stamp). For every type of Software that is subject to a protected license, a license key is assigned by the SIEMENS AG . Only if the existence of a valid license has been located on the PC after the startup of the Software, the corresponding Software can be used according to the interrelated terms of licenses and use. Notes: To get a brief overview about its user surface and function range of the STEP 7 Basis Software, you can work without License Key. However, the unlimited use in terms of the legal situation of licenses (aggreements) is only permitted and possible with an installed License Key. If no valid License key is © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 445 installed for STEP 7 V5.3, a Trial License Key is used that is supplied by default and installed with STEP 7. However, STEP 7 can only be used for 14 days with this License Key. During the first startup of STEP 7, the Trial License is activated without a valid License key. The system regularly asks you to do the installation. License Keys can be saved and transferred between the single storage media: on License Key-floppies, on local Harddrive memory and on harddrive memories of PCs located in the Network. If Software-Products are installed for which no license key is available you can assess the license key requirement und order the necessary licenses. More information about the handling of License Keys can be obtained in the Online-Help for the Automation License Manager. License-Types For Software-Products of the SIEMENS AG, it is differentiated between the following useroriented License-types. The behaviour of the Software is controlled by the different license keys for all license types. The mode of use results from the corresponding Certificate of License. License-Type Description Single License The use of the Software is unlimited in terms of time on an arbitrary PC. Floating License Unlimited in terms of time, refers to the use of a related user right ("remote" use) of a Software. Trial License The use of Software is limited: Refers to a validity of maximal 14 days from the moment of the first start, the use for test and validation purposes (exclusion of liability). Upgrade License For an Upgrade, specific requirements of the system status may be necessary: By means of an Upgrade license, a license of an "Old-"Version x can be converted into a Version >x+... . An Upgrade may be required by e.g. an extension of the quantity structure. 12.12 Difference between ALM and SIMATIC Logon http://support.automation.siemens.com/WW/view/en/22814523 QUESTION: What are the differences between theAutomation License Manager (ALM) and SIMATIC Logon? © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 446 EKB Installer ANSWER: The Automation License Manager is the tool supplied for STEP 7 V5.3 for managing the License Keys in STEP 7. The use of SIMATIC Logon requires a fee. It provides user administration for both the SIMATIC Software and the License Keys. The following brief description of the functions shows the differences between both programs. Automation License Manager V1.0 Transfer of License Keys to the local hard disc. Transfer of License Keys via network PC (ALM must be installed on the server). Fig. 1: Settings of ALM V1.0 Automation License Manager V1.1 Transfer of License Keys to the local hard disc. Transfer of License Keys to a network PC (ALM must be installed on the server). Use of License Keys on a network PC (ALM must be installed on the server). © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 447 Fig. 2: Settings of ALM V1.1 SIMATIC Logon SIMATIC Logon is a software-package that assigns authorizations for SIMATIC applications and facility areas. It includes following components: SIMATIC Logon Service The basis package with central access protection for SIMATIC applications and plant areas. SIMATIC Logon Service STEP 7. An option package for embedding SIMATIC Logon Service into the SIMATIC Manager. SIMATIC Logon Admin Tool - permits tasks administration. An option package that facilitates the assignment of authorizations (Windows-Groups, function-related rights , ...) for the tasks of an application (SIMATIC BATCH, WinCC, ...) . The access protection can be started by logging into the Logon-feature (keyboard), via a chip card-reader or via other devices. Note: Using the option packages requires the installation of the basic package. 12.13 STEP 7 V5.3 - notes on using STEP 7 License Keys QUESTION: What should you watch out for when installing, deinstalling, restoring and upgrading License Keys? ANSWER: © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 448 EKB Installer Rules: Before formatting, compressing or restoring the drive or before installing a new operating system, you must transfer the License Keys from the hard disk back onto the License Key floppy disk. If a backup of the hard disk includes a copy of a License Key, there is a risk of overwriting and thus destroying the still valid License Keys when you reload the backup data. To avoid this either you have to remove the License Keys before making the backup copy or exclude them from the backup. If you are using a hard disk optimizing program that can move fixed blocks, then you must save any License Keys beforehand on the License Key floppy disk. Due to the License Keys a cluster is created on the target drive, which might be marked as "defective". You must not "repair" this cluster. You can copy files on the License Key floppy disk. However, you cannot use these copies to transfer License Keys. You need the original License Key floppy disk for that. When you install the License Keys, the data is stored in the "AX NF ZZ" directory on your hard disk. You must not change the attributes, move the folder nor delete the files. You can no longer deinstall defective License Keys using the Automation License Manager. This might block the installation of new License Keys. How do you transfer License Keys? When installing STEP 7, the License Key required is transferred automatically to the hard disk if the correct License Key floppy disk has been inserted. If you do not insert any or the incorrect License Key floppy disk, you are prompted accordingly to insert the correct License Key floppy disk. Procedure: Insert the appropriate License Key floppy disk when requested to do so. Acknowledge the request. The License Key is transferred to a physical drive. If the transfer of the License Key is to be made later, then proceed as follows: Insert the License Key floppy disk in the appropriate floppy disk drive. Open the "Automation License Manager" program via the Windows Start menu Start > Simatic > License Management > Automation License Manager. Select the floppy disk drive on which your License Keys are located. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 449 Select the License Keys you want to transfer and drag-and-drop them onto the target drive. The License Keys have now been transferred. Note: To transfer License Keys you need all access rights to the source drive and the target drive. Upgrading a License Key or an "old authorization": Requirement: The Automation License Manager must be installed. Old License Key -> New License Key You require the CoL (Certificate of License) and the License Key of the older version and the CoL (Certificate of License) and the Upgrade License Key of the target version Old authorization -> New License Key You require the old authorization and the CoL (Certificate of License) and the Upgrade License Key of the target version Old authorization -> New authorization You require the old authorization and the CoL (Certificate of License) and the Upgrade Authorization of the target version Procedure: The following steps show how to upgrade a License Key and an authorization. The steps are the same for a License Key and an authorization. The example is the text for a License Key. 1. Select the view via View > Administration. 2. Transfer the License Keys of the previous version and the Upgrade License Keys to the hard disk on which you wish to do the upgrade. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 450 EKB Installer 3. In the navigation area in which the License Key is located select the storage location for which the upgrade is to be made (previous version). 4. In the object area select the License Key for which the upgrade is to be made. 5. Execute the following menu command: License Key > Upgrade. Result: Upgrade is made. Notes: If there is only one option for upgrading, the upgrade is made without any more displays or requests. If there are multiple options for upgrading, the "License Key Upgrade" dialog opens. In this you select the upgrade to be made and then click on the "Upgrade" button. Restoring License Keys If a License Key is defective, please contact our licensing hotline: Telephone Fax E-mail Europe/Africa +49 180 5050 222 +49 180 5050 223 adautorisierung@siemens.com America +1 423 262-2522 +1 423 262-2289 simatic.hotline@sea.siemens.com Asia/Australia +86 1064 757 575 +86 1064 747 474 adsupport.asia@siemens.com You might possibly be able to "repair" a defective License Key with the menu command License Key > Restore. Use this menu item to restore defective License Keys. You may only use this function in agreement with the licensing hotline. Generally you do not need this function. You are in permanent telephone contact with the hotline during the whole restore procedure. When you call the hotline, please make sure that you have the following information at hand: Licensing: name of the License Key Query code: the code that you have to give to the licensing hotline You then receive an enabling code from the licensing hotline: Enter this enabling code and then press OK to run the "Restore" function or Click on Cancel if the License Key is not be to be restored. Deinstalling License Keys If you want to format a hard disk on which there are the License Keys, then deinstall the License Keys beforehand. To do this you transfer the License Keys from the hard disk back onto the © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official 451 floppy disk. You can also transfer all the License Keys of the options packages onto this floppy disk. Procedure: Insert the License Key floppy disk into the appropriate floppy disk drive. Open the "Automation License Manager" program via the Windows Start menu Start > Simatic > License Management > Automation License Manager. Select the drive on which your License Keys are located. Select all the License Keys and drag-and-drop them onto the target drive. The License Keys are then transferred. Note: The License Keys can also be transferred to other hard disks or network drives. 12.14 License concept PCS 7 V7 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 452 EKB Installer 12.15 License concept PCS 7 V8.0 All volume licenses are count relevant licenses All count relevant license keys are without version label (SIFCY****9999*.EKB) Number of license keys has been reduced significantly (licenses with the name „Upgrade Dump“) Assignment of license key to product considerably improved Simplification/cleaning up of the license packages ( AS = Step7/CFC/WinCC in licence package) No more power packs in PCS 7 V8.0 Reduction of the number of licenses for future updates : to >> V8.0 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 FAQ official © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 453 454 EKB Installer © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Top Level Intro This page is printed before a new top-level chapter starts Part XIII 456 13 EKB Installer Plugin for Total Commander Plugin for view simatic keys in Total Commander. Add suport ALM3 keys. Добавка к TotalCommander для просмотра информации о ключах по F3 Добавлена поддержка ALM3 ключей Simatic_wlx_EKB_Info.zip When open archive plugin w ill be install © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Plugin for Total Commander Total Commander's Web Site http://w w w .ghisler.com / Useful Total Commander Add-ons http://www.ghisler.com/addons.htm or Total Commander Plus with plugins from www.samlab.ws http://download.samlab.ws/tcpp/total_commander_powerpack_russian_pro.zip © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 457 Top Level Intro This page is printed before a new top-level chapter starts Part XIV 460 14 EKB Installer How unpack files I use Total Commander Plus with plugins from www.samlab.ws http://download.samlab.ws/tcpp/total_commander_powerpack_russian_pro.zip Unpack multipart RAR archive Unpack CD-image NRG, ISO, BIN to hard disk folder. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 How unpack files Total Commander's Web Site http://w w w .ghisler.com / Useful Total Commander Add-ons http://www.ghisler.com/addons.htm © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 461 Top Level Intro This page is printed before a new top-level chapter starts Part XV 464 15 EKB Installer About http://plcforum.uz.ua http://plcforum.uz.ua =======NEWS ====== НОВОСТИ ========= 19 Mar 2010 12:53 plc.net.ru was closed by hoster, so we had to move to new domain ===> Currently it is http:// plcforum.uz.ua in test mode (possible SQL problems) Временно открыли заменитель-зеркало http://plcforum.uz.ua в тестовом режиме (возможны проблемы с SQL ) ======= OLD INFORMATION ====== СТАРАЯ ИНФОРМАЦИЯ =========== 15 Mar 2010 http://PLC.NET.RU closed by hoster wait new name use torrents links http://rutracker.org/forum/viewforum.php?f=1192 today (2012) is the FALSE site - the name of the website plc.net.ru is stolen from us Сайт plc.net.ru был закрыт, а теперь кем то украден - мы не имеем отношение к его содержимому 15.1 About closed plc.net.ru today (2012) is FALSE site - name of the website plc.net.ru is stolen from us 19/03/2010 reopened forum with links http://www.plcforum.uz.ua perhaps we will change the name of the forum from UZ.UA if this happens, then you can learn a new name on the forum http://rutracker.org/forum/viewforum.php? f=1192 Сайт plc.net.ru был закрыт, а теперь кем то украден - мы не имеем отношение к его содержимому =======NEWS ====== НОВОСТИ ========= 19 Mar 2010 12:53 Временно открыли заменитель-зеркало http://plcforum.uz.ua в тестовом режиме (возможны проблемы с SQL ) ======= OLD INFORMATION ====== СТАРАЯ ИНФОРМАЦИЯ =========== 15 Mar 2010 http://PLC.NET.RU closed by hoster Закрытие http://PLC.NET.RU (ex simatic.net.ru) интернациональный форум обсуждал программное обеспечение для автоматизированных систем управления технологическими процессами http://rutracker.org/forum/viewforum.php?f=1192 Цитата: НЕЛЕГАЛЬНОЕ РАСПРОСТРАНЕНИЕ ССЫЛОК НА ПО нанятые нами адвокаты (ANTI-PIRACY) наблюдают за вашим форумом plc.net.ru уже долгое время. На форуме постоянно появляются ссылки на пиратские копии программы PLC-ANALYZER pro 5 нашей фирмы, а также некоторых других широко известных компаний. © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 About http://plcforum.uz.ua 465 Российскими и белорусскими адвокатами была собрана полная информация о вас – как хозяина/модератора - и пользователях, которые ставят ссылки онлайн. В понедельник, 15.03.2010 в 17:00 часов по московскому времени, мы направляем дело в суд. В ваших же интересах выполнение ниже перечисленных пунктов до указанного срока. ВАШ ЕДИНСТВЕННЫЙ ШАНС: · немедленное удаление всех сообщений, тем и активных/неактивных ссылок на программу PLC-ANALYZER pro 5 · удаление профилей/пользователей, которые эти ссылки распространяют · недопущение с вашей стороны дальнейшего распространения пиратских ссылок на форуме · обязательное уведомление всех пользователей о нелегальности распространения ссылок на форуме и нарушении авторских прав на интеллектуальную собственность... ANAGER ANTI-PIRACY DEPARTMENT Александр Томас --AUTEM GmbH Dithmarscher Straße 29 D-26723 Emden / Germany Phone +49 (0)4921/9610-40 Fax +49 (0)4921/9610-96 eMail at@autem.de www.autem.de Подробности - указанная в данном письме информация частично является блефом (адвокаты видимо в покер играют) - наехали на бывшего владельца хостера, который продал хост задолго до этого письма. Соответственно никаких прямых сведений о пользователях форума у "белорусских адвокатов" (!?) нет. 15.2 About closed SIMATIC.net.ru simatic.net.ru is closed by hoster 22/01/2007 (закрыт провайдером) http://plc.net.ru is closed by hoster 2010/03/15 (работал до 15/03/2010, сейчас это подделка - адрес plc.net.ru украден ) Currently it is http://plcforum.uz.ua http://rutracker.org/forum/viewforum.php?f=1192 to send keys plcsim@mail.ru to send links plcnetru@mail.ru http://plc.net.ru неофициальный сайт по контроллерам сименс Unofficial site for Siemens PLC Forum © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 466 EKB Installer simatic (International User Forum) SIMATIC Automation systems Промышленные Логические Контроллеры SIMATIC S7-300/-400 SIMATIC HMI Панели оператора PP/OP/TP/TD/MP, программные пакеты ProTool/WinCC flexible, SCADA система WinCC samples примеры программ about forum о форуме offtopic Флейм JOB Работа Russian User Forum (Для русскоязычных пользователей) Simatic HMI other PLC (International User Forum) other PLC другие контроллеры OMRON Allen-Bradley © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Top Level Intro This page is printed before a new top-level chapter starts Part XVI 468 16 EKB Installer Premium Studio DVD Premium Studio DVD English Russian Description - Описание по русски Premium Studio DVD Deutsch Premium Studio DVD Francais I recommend to buy from Siemens Premium Studio 2009 for 90 euros for acquaintance with Simatic programs: http://support.automation.siemens.com/WW/view/de/31498142 Premium Studio 2009 provides you with the most important software packages for engineering and runtime for SIMATIC S7/C7, SIMATIC HMI, SIMATIC NET, SINUMERIK and SIMOTION on three data carriers (DVDs). The user can select general settings (e.g. languages for installation, installation path, etc.) and the required software packages via a specially developed SETUP. The installation is then performed automatically (silent), i.e. no further user activities are required. The use of Premium Studio for installation and maintenance of the software packages will provide a significant saving of time and money. No licenses are included with Premium Studio. For productive operation of the installed software products the user can either use existing licenses of the version in question or he must purchase new licenses. Premium Studio 2008 SE is now available for delivery. The scope of delivery of Premium Studio 2008 SE includes 3 single-sided dual layer DVD-R discs with large storage capacity (8.5GB) DVDs. SIMATIC STEP 7 V5.4 SP4 SIMATIC STEP 7 for SINUMERIK Hardware V5.4 SP2 SIMATIC S7-GRAPH V5.3 SP6 SIMATIC S7-PDIAG V5.3 SP2 SIMATIC S7-HIGRAPH V5.3 SP1 SIMATIC S7-SCL V5.3 SP5 SIMATIC S7-PLCSIM V5.4 SP2 SIMATIC S7 Distributed Safety Programming V5.4 SP4 SIMATIC S7 F Configuration Pack V5.5 SP4 SIMATIC D7-SYS V7.0 SIMATIC CFC V7.0 SP1 SIMATIC Version Cross Manager V7.0 SP1 SIMATIC Version Trail V7.0 SP1 SIMATIC Logon V1.4 SP1 SINUMERIK Toolbox 810D/840D Add-on for STEP 7 V5.4.4 SIMATIC iMap V3.0 SP1 SIMATIC iMap STEP 7 Add-on V3.0 SP4 SIMATIC Standard PID Control Config. SW V5.2 SIMATIC Standard PID Control FB V5.2 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Premium Studio DVD 469 SIMATIC Modular PID Control Config. SW V5.1 SIMATIC Modular PID Control FB V5.1 SIMATIC PID Self Tuner V5.1 SIMATIC Maintenance Station 2007 SP3 WinAC RTX 2008 SIMATIC Teleservice 7/2008 (V6.1 incl. SP2) SIMATIC WinCC V7.0 SIMATIC WinCC ProAgent V6.0 SP4 SIMATIC WinCC Web Navigator V7.0 SIMATIC WinCC Dat@Monitor V7.0 SIMATIC WinCC Connectivity Pack V7.0 WinCC flexible 2008 SIMATIC NET PC-Products 2007 SINEMA E 2006 SP3 A&D Data Management Agent V1.2 A&D Data Management Client V6.1 Drive ES Basic V5.4 SP2 SINUMERIK HMI configuring package WinCC flexible 2008 HMI Advanced V07.03.02.00 X TRANSLINE 2000 HMI Pro CS V07.02.00.00 TRANSLINE 2000 HMI Pro RT V07.02.00.01 SIMATIC PDM V6.0 SP4 SIMOTION Scout V4.1.1.6 SIMATIC S7 Technology (T-Config) V4.1 SIMATIC RFID Systems V1.3 SP3 SIMATIC RF-MANAGER 2008 SIRIUS Motor Starter ES 2007 SP1 SIRIUS Soft Starter ES 2007 SP1 SIRIUS SIMOCODE ES 2007 SP1 SIRIUS Modular Safety System ES 2008 Automation License Manager V4.0 torrent link http://rutracker.org/forum/viewtopic.php?t=2060069 16.1 English I recommend to buy from Siemens Premium Studio 2009for 90 euros for acquaintance with Simatic programs: http://support.automation.siemens.com/WW/view/de/31498142 Premium Studio 2009 provides you with the most important software packages for engineering and runtime for SIMATIC S7/C7, SIMATIC HMI, SIMATIC NET, SINUMERIK and SIMOTION on three data carriers (DVDs). The user can select general settings (e.g. languages for installation, installation path, etc.) and the required software packages via a specially developed SETUP. The user can select general settings (e.g. languages for installation, installation path, etc.) and the required software packages via a specially developed SETUP. The installation is then performed automatically (silent), i.e. no further activities by the user are © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 470 EKB Installer necessary. The use of Premium Studio thus results in a significant time and cost saving for installation and maintenance of the software packages. No licenses are included with Premium Studio (* but you can activate trial keys for 14 days). For productive operation the user must either use existing licenses of the version in question or he must purchase new licenses. ! PS2009 is the last edition - wait equal TIA Portal Professional torrent link http://rutracker.org/forum/viewtopic.php?t=2060069 16.2 Russian Список http://support.automation.siemens.com/WW/view/de/31498142 Premium Studio 2009 предоставляет Вам самые основные пакеты программ для разработки и времени выполнения для SIMATIC S7/C7, SIMATIC HMI, СЕТИ SIMATIC NET, SINUMERIK и SIMOTION на трех носителях информации - двухслойных 8Gb DVD. Пользователь может выбрать общ ие параметры настройки и необходимые пакеты программ через развитую программу установки. Использование Премиальной Студии таким образом приводит к сущ ественной экономии времени и стоимости на установку и обслуживание пакетов программ. Никакие лицензии не включены с Премиальной Студией (*, но при запуске программ Вы можете активизировать пробные ключи для испытания в течение 14 дней). Для нормальной работы пользователь должен использовать сущ ествующ ие лицензии рассматриваемой версии, или он должен купить новые лицензии отдельно. Версия комплекта стоит всего 90 евро по каталогу. Я рекомендую купить у Сименса Premium Studio 2009 для ознакомления с программами Сименса. torrent link http://rutracker.org/forum/viewtopic.php?t=2060069 Больше комплект Premium Studio выпускаться не будет - взамен будет выпускаться комплект TIA Portal Professional. 16.3 Deutsch http://support.automation.siemens.com/WW/view/de/31498142 Premium Studio 2009 bietet die wichtigsten Software-Pakete für Engineering und Runtime zu den Systemen SIMATIC S7/C7, SIMATIC HMI, SIMATIC NET, SINUMERIK und SIMOTION auf 3 Datenträgern (3 * 8Gb DVD) an. Dabei kann der Anwender allgemeine Einstellungen für die © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Premium Studio DVD 471 Installation (z.B. zu installierende Sprachen, Installationspfad usw.) und die benötigten SoftwarePakete über ein speziell für das Premium Studio entwickeltes SETUP auswählen. Die Installation erfolgt danach automatisch ("silent"), d.h. es sind keine weiteren Aktivitäten des Anwenders notwendig. Der Aufwand für die Installation und Pflege der Software-Pakete reduziert sich mit dem Einsatz des Premium Studios deutlich. Mit dem Premium Studio werden keine Lizenzen mitgeliefert. Für die produktive Nutzung der installierten Software-Produkte muss der Anwender auf vorhandene Lizenzen der entsprechenden Version zurückgreifen oder neue Lizenzen bestellen. Die Version des Satzes wird 2 Male in das Jahr erneuert. torrent link http://rutracker.org/forum/viewtopic.php?t=2060069 16.4 Francais http://support.automation.siemens.com/WW/view/de/31498142 Premium Studio 2009 est le plus important package de logiciels d’ingénierie et d’exécution pour SIMATIC S7/C7, SIMATIC HMI, SIMATIC NET, SINUMERIK et SIMOTION, sur 3 supports de données (3 * 8Gb DVD). Des configurations générales, telles que : les packages de logiciels requis, les langues qui doivent être installées, le chemin d’installation, etc., peuvent être sélectionnées par l’intermédiaire d’un SETUP spécifique. L’installation se déroule alors de façon automatique (transparente), l’utilisateur n’a pas à faire de manipulations supplémentaires. L’utilisation de Premium Studio entraîne des gains de temps et de coût considérables pour l’installation et la maintenance du package de logiciels. Aucune licence n’est inclue dans Premium Studio. Les licences doivent être obtenues séparément, soit en utilisant des licences déjà existantes de la version en question, soit en achetant de nouvelles licences. La version de l'assortiment se renouvelle 2 fois par annйe. torrent link http://rutracker.org/forum/viewtopic.php?t=2060069 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Top Level Intro This page is printed before a new top-level chapter starts Part XVII 474 17 EKB Installer Send keys to send keys plcsim@mail.ru to send links plcnetru@mail.ru © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Top Level Intro This page is printed before a new top-level chapter starts Part XVIII 476 18 EKB Installer Stuxnet, Ququ, Flame See more info about Simatic users oriented virus http://www.symantec.com/connect/blogs/stuxnet-breakthrough http://www.symantec.com/connect/blog-tags/w32flamer http://www.symantec.com/connect/w32_duqu_precursor_next_stuxnet? om_ext_cid=biz_socmed_uk_pv_181011_socialmedia_duqureport © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Index Index -CCAL license 36, 83 Count key SIFC*.ekb 33 -FFind key 28 Floating key SIFL 33 -IInstall key 30, 31, 36 -LList index out of bounds 56, 104 -Ppowerpack license key SIUP*.EKB Premium Studio DVD 468 problems 51, 104 72, 111 -RRental keys SIRT*.ekb Rental keys SITT*.ekb 33 33 -SSiemens.exe 31 Simatic IT 404 Single key SISL*.ekb 33 -TTrial key SITTA*.ekb 36 © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 477 478 EKB Installer Endnotes 2... (after index) © 2017 http://plcforum.uz.ua/viewtopic.php?f=30&t=218 Back Cover

EKBInst

Related documents

Add this document to collection(s)

Add this document to saved

Suggest us how to improve StudyLib