How to Protect a Boom Lift From Tip-Over? https://torcanlift.com/ Boom Lift As you know boom lift is a versatile piece of equip ment used for elevating people to certain heights. Therefore, to ensure the safety of the workers wor king at height, it’s vital to maintain the stability of the lift. Tip-over of any equipment is not a good sign for a ny construction site. It brings lots of hazards with itself and poses a life-threatening issue to the wor kers. Often, boom lift tip-over occurs due to the in appropriate use of it. Operators due to their busy schedules often forget to follow certain regulations regarding the safe us e of the boom lift, which sometimes becomes the r eason for the tip-over. 4 Tips to Avoid Boom Lift Tip-Over 1. Must Follow The Instructions Before you start using any machine tool, make sure you read and understand your Operation & Safety Manual. Reading this manual will sug gest to you how to use the equipment safely. Always keep a copy of the machine’s Operation and Safety Manual, AEM safety manual, and A NSI manual of responsibilities in the weather-r esistant storage container of the lift. 2. Inspect The Workplace Gently When it comes to boom lift safety precautions, it ’s best to inspect the workplace before operating the equipment. Performing such an inspection al lows you to locate an obstruction that is dangero us to the operation of the mobile elevating work platform. When inspecting you must look for these things: Rugged, smooth, or unstable surfaces • Find out if there are any drop-offs or holes • Are there any slopes or ditches • Figure out the debris 3. Make a Plan Ahead After inspecting the workplace and figuring ou t the hazard, make a plan on how to safely or e ffectively execute the task. It's good to plan bef ore tackling a risky job, this will ensure your safety. While making the plan, consider each type of hazard and outline what steps you need to tak e to prevent or get rid of any potential risks be fore and during your machine's operation. 4. Examine The Ground Condition Ground condition is the major reason behind any type of tip-over. Before landing your boom lift to t he workplace examine the ground condition prop erly. If the land surface is uneven then be careful or refuse to work on such terrain. By getting the equipment’s proper training, you ca n also avoid tip-over. Whether you are handling a boom lift or a scissor lift, you should know the im portance of proper training. Ref Url: How to Protect a Boom Lift From Tip-Over Address - 115 Rivalda Road Toronto, ON Canada M9M 2M6 Phone No +1-833-743-2500 Email Id – info@torcanlift.com Website – www.torcanlift.com You can also follow us -