U203 Questions 1. Represents a start/finish of a flow diagram 2. Engineering Industry that uses fusion to join metals 3. Costs Associated with the manufacture of a product (Wages, material, direct labour etc.) 4. Engineering industry associated with Boeing 5. Department responsible for buying all the required components for manufacturing 6. Group 3 Recycling Plastic 7... Department responsible for holding all stock of materials and equipment 8. Type of tools which can have more than one function 9. Engineering Industry associated with Ford 10. Financial gain once costs associated with manufacturing have been deducted 11. Department responsible for inspecting the manufactured complies with required standard 12. Increasing of costs relating to the market and economy 13. Type of equipment that's been automated 14. Group 6 Recycling Plastic 15. Batch of components that get requested often 16. Department responsible for responsible for taking an idea and turning it into a product 17. Materials ability to return to its original shape once distorting force is removed 18. Department responsible for advertisements and sells the manufactured item 19. Group 2 recycling Plastic 20. Batch of components of low quantities 21.Represents a process in a flow diagram 22.Unavoidable costs associated with the running of the organisation 23. Engineering Industry working with Sheet metal 24 Manufacturing of a component usually a one-off 25. The point at which cost and income are equal and there is neither profit nor loss 26. Represents a decision in a flow diagram 27. A pictorial representation of a sequence of events, showing inputs, actions, decision points and outputs. 27. Department responsible for allocating resources required to proceed with manufacture 28. Type of tools which have a specific function and role in the manufacturing process 29. Group 1 Recycling Plastic 30. Group 5 Recycling Plastic 31. Materials containing or consisting of iron 32. Costs that are derived from overhead charges (Utilities, Advertising, Machine Depreciation, downtime) 33. Department responsible for looking after machinery and equipment 34. Materials ability to withstand localised permanent indentation 35. Materials ability to deform plastically without damage and retain its new shape