Trainings
Bosch Rexroth
Academy
www.boschrexroth.com
Our knowledge
for your
application
Highlights
Digital
Transformation
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Face-to-face training
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Online training
Practical training
eLearning
Blended learning
Table of contents
Our knowledge for your application
3
Linear Motion Technology
28
Highlights
7
Mobile Hydraulics
29
Digital Transformation
13
Resistance Welding
33
Assembly Technology
14
Tightening Systems
34
Electric Drives and Controls
15
Pneumatics
35
Industrial Hydraulics
23
Safety Technology
36
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
2
Our knowledge
for your
application
Highlights
Digital
Transformation
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Our knowledge for
your application
Both our customers and our company must be able to successfully adapt to the
Our Academy builds on Bosch Rexroth's decades of experience as a technology
current and future changes of the world. Challenges often come from the fields of
leader and realization partner. We are already working today on solving the
climate change, energy supply, demographic change and digital transformation.
problems of tomorrow in our global network of factories or for our international
People are and will remain an essential factor in ensuring the long-term
customers.
competitiveness of companies. Ideally qualified experts are increasingly difficult to
Our training portfolio starts with essential basic knowledge for existing and new
find. New occupations are emerging and older ones are changing in the
fields of learning and offers continuously optimized learning paths. We respond
requirements placed on them. This development, e.g., the increasing share of IT or
flexibly to your needs and requirements - whether face-to-face, online or in hybrid
the new and disruptive technologies, can therefore only be mastered with a
learning formats such as blended learning. A special highlight are our expert
successful qualification of the employees. In addition, people have more
trainings, in which we demonstrably ensure the competence and implementation
possibilities, the occupational fields are becoming more individual and require new
capabilities of our course participants for the operational application. This in one of
skills. This can only be covered by equally flexible, modern and comprehensive
our modern training locations or on site at your place. In our training brochure you
qualification measures.
will find a compact summary of our competencies and the associated learning
paths and trainings as well as the latest highlights.
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
3
Our knowledge
for your
application
Highlights
Digital
Transformation
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Bosch Rexroth Academy
Pneumatics
Safety
Technology
Trainings
Experience high-quality training with
digital learning methods and content
for your personal basic and advanced
training. Choose your technology and
learn from the basics right up to
expert knowledge.
Innovations and trends from the industry for the
educational market
Welcome to the Bosch Rexroth Academy
https://www.boschrexroth.com/en/
de/academy/training/
With more than 225 years of experience as a global industrial enterprise and
leading expert in drive and control technology, we have sound product, technology,
and process know-how. We are happy to share this knowledge with you and assist you
as your training partner for demanding technical education on the exciting path of
digital change.
WE MOVE. YOU WIN.
Systems
Technology at your fingertips:
Get hands-on experience at our
workstations equipped with standard
industrial components and gain
technology know-how as well as with
solution competence!
https://www.boschrexroth.com/en/
de/academy/training-systems/
Media
An ideal combination of analog and
digital: Immerse yourself in the
extensive media offer and use our
media for the modern and digital
transfer of knowledge.
https://www.boschrexroth.com/en/
de/academy/media/
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
4
Our knowledge
for your
application
Highlights
Digital
Transformation
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Trainings
Always one step ahead with the training courses from the
Bosch Rexroth Academy – Our knowledge offer for you
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Face-to-face training
Face-to-face and practical training with personal
contact. Direct communication and, above all,
"handling" the components reinforce the
theoretical content.
As a global partner, Bosch Rexroth supports customers in mastering mechanical and plant
engineering challenges around the world with its cutting-edge technology and unique industry
knowledge. Thus, Bosch Rexroth Academy has established itself as a competent partner for basic
and advanced training for numerous companies and institutions. With their various training
methods, our trainers guarantee a knowledge transfer which is always oriented at the learning
target and in accordance with the state of the art. The Bosch Rexroth Academy is certified
according to DIN EN ISO 9001:2008 and thus supports the claim of delivering utmost quality in
knowledge transfer.
Online training
Online knowledge transfer (live or as a recording)
by our trainers in the virtual classroom (global).
Ideal learning paths for your job role
The presentation of our knowledge offer is focused on the essentials in the new training
brochure: On your ideal learning path! Put together your individual learning program that will
allow you to acquire the desired skills and abilities for your job role and to optimally equip
yourself for your professional future.
Competent and qualified trainers
Our trainers have long-term experience in numerous units of our company and go through an
additional certified trainer education in their specialist fields and soft skills. Benefit from our
industrial experts who will lead you to learning success with the training method of your choice!
eLearning
Independent learning on a computer is an integral
part of knowledge transfer. Learning contents,
e.g., on technology basic knowledge are made
available in the form of presentations,
clearly divided into online learning modules.
Blended learning
The interaction of eTraining,
eLearning and face-to-face training.
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
@
@
5
5
Our knowledge
for your
application
Highlights
Digital
Transformation
Assembly
Technology
Electric Drives
and Controls
Training finder online
Training availability and registration
Use the Bosch Rexroth Academy training finder to explore our
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
YOU CAN FIND OUR TRAINING PROGRAM
WITH AVAILABILITY INFORMATION HERE:
https://academy.boschrexroth.com/en_de/
versatile range of training offers. Here you will find detailed
descriptions of each technology, your desired training type, dates,
training locations and the possibility of direct registration.
Face-to-face training
Online training
Practical training
Blended learning
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
eLearning
6
Our knowledge
for your
application
Highlights
Digital
transformation
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
RT13-007
Basics for Digital
Transformation (eLearning)
CONTENTS
The ongoing digital transformation is fundamentally changing the
framework conditions and the entire industry landscape.
Companies face massive challenges in the targeted design and
implementation of the digital transformation from individual,
practical, and economic aspects. This eLearning course and the
learning nuggets convey essential basic knowledge for the digital
transformation, for example on digital technologies, Industry 4.0,
artificial intelligence and real application cases from practice.
f Automation pyramid and networking (MES, ERP, IT, OT)
f Introduction to Industry 4.0, opportunities and strategies of
the countries
f What is behind the digital transformation?
f Cyber-physical systems and digital twins
f Data, information and knowledge
f Cloud, big data, data storage and tools
f Business intelligence, analytics, IoT and AIoT
f Factory of the future, technologies and megatrends
f Artificial intelligence, machine learning and use cases
f HMI, collaboration and cobots
f Status quo of digital transformation in the industry
landscape
f Numerous i4.0 use cases from practice
LEARNING TARGET
f Good understanding of the digital transformation,
its technologies, possibilities, and challenges
f Basic understanding of digitization, networking, automation,
and related tools
f Background knowledge on future topics such as artificial
intelligence, machine learning, and digital twins
f Understanding of i4.0 implementation through intensive
practical examples and their potentials as well as K.O.
criteria
PREREQUISITE
none
Do you have
any questions?
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
Register
now!
7
7
Our knowledge
for your
application
Highlights
Digital
Transformation
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
RT13-011
Certified Expert
Machine Connectivity (TÜV)
This intensive practical training is aimed at implementers in the
companies such as maintenance personnel, planners, and
production IT managers who want to network the machinery in
their company in order to achieve more transparency in production
and thereby reduce standstill time and increase plant availability.
The necessary hardware and software competence is taught at and
with industrial systems with a view to prepare the participants for
the economic production networking in practice.
CONTENTS
f Inventory of existing machinery
f Theory of different operating systems, interfaces,
and protocols (e.g., OPC UA, MPI)
f Wiring a machine with OPC UA, and MPI
f Installation of MQTT via Solace
f Installing sensors
f Configuration of the IP addresses of the machine
f Setup of machine networking in various ways;
Node RED, device bridge, and universal
f Connector to database
f Data cleansing and saving/storage of machine data
f Final examination and certification TÜV certificate
LEARNING TARGET
f Analysis of brownfield and machinery to identify suitable
systems for networking
f Industrial competence for connecting and networking
machines and production plants
f Selection and use of appropriate data to increase
transparency and productivity
PREREQUISITE
Technical training (academic degree or vocational training)
as well as basic knowledge in network technology and data
processing desirable
Do you have
any questions?
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
Register
now!
8
8
Our knowledge
for your
application
Highlights
Digital
Transformation
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
RT06-046
Mobile Hydraulics – Controls and
Components in open-loop Circuits
CONTENTS
The training course provides information on controls and
components in open-loop circuits. It focuses on the design,
function, and properties of relevant components and systems.
Learn everything about load pressure-independent flow distribution
and the differences between throttle and load-sensing control
systems. You will carry out adjustments and tests on the training
test bench and receive information on function and troubleshooting.
f Energy balances and features of throttle and load-sensing
f Function and design of axial piston units in open-loop
circuits (A11VO, A10VO, A6VM) incl. adjustment types for
load sensing, LUDV, and positive control
control systems in conjunction with the relevant pump
control
f Setup, function, and options for using Rexroth control blocks
and subsystems: SM...; MO...; M8...; M9...; SP08...; M4...;
SB...; RS...; M6...; M7...; stabilization module RSM2...;
Safety valves MHDB...; Pre-control unit TH...;
LEARNING TARGET
f Obtaining knowledge about control systems for axial piston
units and how they interact with the valve components
f Obtaining knowledge about the various control types,
their features, and variants
f Learning to recognize malfunctions and localizing the
affected components
PREREQUISITE
Basic knowledge of hydraulics, RT06-012 or comparable
knowledge
Do you have
any questions?
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
Register
now!
9
9
Our knowledge
for your
application
Highlights
Digital
Transformation
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
RT06-014
Electronics in
Mobile Applications
This training course is intended to provide experienced and new
employees with insights into the electronification of hydraulic
applications and systems. You will become familiar with the
components used. Participants will be taught how to use project
planning tools and application software.
CONTENTS
f Overview of the BODAS environment (BODAS toolkit)
f Project planning tools
f Overview of application software
f Exercises on the topics presented
LEARNING TARGET
f Getting to know the basics of the electronification of
hydraulic systems
PREREQUISITE
Technical understanding
Do you have
any questions?
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
Register
now!
10
Our knowledge
for your
application
Highlights
Digital
Transformation
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
RT02-102
ctrlX CORE –
Commissioning and Project Planning
CONTENTS
In this training course, we will provide you with useful background
information regarding the commissioning and project planning of
ctrlX AUTOMATION. Your learning target will be the commissioning
of a machine with several axes, controlled via ctrlX WORKS,
REST IP and ctrlX PLC (PLC program).
f Getting to know ctrlX WORKS and engineering tools and
f CtrlX AUTOMATION system overview
f CtrlX CORE commissioning
f Working with the ctrlX Data Layer
implementing the configuration of components
f Parameterizing ctrlX for use with a ctrlX CORE
f Getting to know and configuring EtherCAT and creating
diagnoses
f Creating and commissioning ctrlX MOTION axes and
kinematics
f Configuring the ctrlX PLC and activating axes
f Authorizing and managing access to the ctrlX CORE
LEARNING TARGET
f Getting to know the system design of the
ctrlX AUTOMATION series
f Configuration of the ctrlX DRIVE PLUS with ctrlX CORE
f How to get access to data and execute commands via the
ctrlX Data Layer
f Providing data via OPC/UA and evaluating fault diagnostics
PREREQUISITE
Basic knowledge of control technology
Do you have
any questions?
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
Register
now!
11
Our knowledge
for your
application
Highlights
Digital
Transformation
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
RT02-106
Programming with
ctrlX PLC Engineering (Online Training)
The training gives an overview of the use, application,
and operation of the ctrlX PLC Engineering Software.
It will discuss the interaction between the engineering
software and the ctrlX CORE controls. You will learn about
PLC configuration and creation of PLC programs within
ctrlX PLC Engineering.
CONTENTS
f Control settings
f Peripheral settings
f Configuration of a PLC Engineering controller
f Programming languages LD, FBD, SFC and SGT
f Data types
f Libraries (repository, manager)
f Troubleshooting
LEARNING TARGET
f ctrlX PLC Engineering software setup
f Being able to create an I/O configuration
f Creating, loading, and testing PLC programs in
ctrlX PLC Engineering
f Knowing how to back up and restore project data in
ctrlX PLC Engineering
PREREQUISITE
Basic knowledge of PLC technology
Do you have
any questions?
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
Register
now!
12
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
welding
Tightening
Systems
Safety
Technology
Pneumatics
Learning Path Digital Transformation
Good understanding of digital
transformation and its
technologies, possibilities,
and challenges
Digital transformation
manager (IHK)
Basics for digital
Transformation (eLearning)
TARGET
4
Digital transformation
manager (IHK)
Certified practical training to plan
and practically implement
production networking
Recommended
learning path
(option 2)
RT13-008
0,5
Basics in IT-Network –
Infrastructure & Security
(eLearning)
Good understanding of IT network
technology and infrastructure and
its technologies, possibilities,
and challenges
RT13-009
0,5
Basics in Data and
Artificial Intelligence
(eLearning)
Recommended learning path (option 1)
3
Certified Expert Machine
Connectivity (TÜV)
Certified practical training to plan
and practically implement
production networking
RT13-012
2
Certified Expert
Visualization and
Analytics (TÜV)
Good understanding of AIoT, data,
and cloud applications, and their
technologies, possibilities,
and challenges
RT13-010
RT13-011
0,5
Certified practical training in the
design and practical
implementation of data
visualization and KPI calculation
RT13-013
5
Basics in smart systems &
IT-architecture
(eLearning)
Certified Value Stream
Manager Digital
Production (TÜV)
Good understanding of IT
architectures and intelligent
systems and their technologies,
possibilities, and challenges
Certified intensive practical
training for the economic design of
a transparent, productive, flexible,
and sustainable value stream in
digital production
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
Certified expert
in machine
networking (TÜV)
0,5
SPECIALIST
Certified expert in
visualization and
analytics (TÜV)
RT13-007
ADVANCED
Certified value stream
manager digital
production (TÜV)
BASIC
13
Our knowledge
for your
application
Highlights
Digital
Transformation
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path Assembly Technology
BASIC
ADVANCED
SPECIALIST
TARGET
2
RT01-001
TS 2 plus
We have compiled a TS 2 plus
training course with the contents
from all modular units.
1
RT01-002
VarioFlow plus
We have compiled a VarioFlow plus
training course with the contents
from all modular units.
1
RT01-003
TS 5
We have compiled a TS 5 training
course with the contents from all
modular units.
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
14
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path IndraDrive Drive Technology
BASIC
ADVANCED
3
RT02-200
RT02-202
Basic knowledge of
electric drive technology
(eLearning)
IndraDrive – Diagnostics
and maintenance
From the function and
properties of selected drive
components to current
developments (eLearning)
RT02-201
This training course will
make it easier for you to start
working with digital IndraDrive
drive controllers.
3
RT02-203
3
RT02-205
SPECIALIST
2
IndraDrive – L3/S4/S5/SB
Drive-integrated safety
technology
This training simplifies your
introduction to drive-integrated
safety technology.
RT02-207
2
Basic knowledge of
electric drive technology
IndraDrive Mi – Diagnostics and maintenance
IndraDrive drive
optimization
From the function and properties
of selected drive components to
current developments
This training course will make it
easier for you to start working with
digital IndraDrive Mi drive
controllers.
This course provides you with
an overview of the drive
functionality options to perfectly
tune drive and mechanics
to one another.
RT02-206
TARGET
2
Rexroth IndraDrive ML
drive system
In this service training you
will be taught the basics to our
IndraDrive ML system
RT02-204
5
IndraDrive with
Multi-Ethernet interface
This training course will
make it easier for you to start
working with digital IndraDrive
drive controllers.
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
If you are interested in online
training - please contact us!
Training.erbach@boschrexroth.de
15
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path ctrlX AUTOMATION
BASIC
RT02-101
ADVANCED
SPECIALIST
TARGET
3
ctrlX DRIVE – the compact
drive system
We give you insight into the most
compact drive system
RT02-102
3
RT02-106
5
ctrlX CORE – Commissioning
and project planning
Programming with
ctrlX PLC Engineering
In the course of this training, we will
teach you useful background
information surrounding the planning
and commissioning of ctrlX
AUTOMATION
The training gives an overview of
the use, application, and operation
of the ctrlX Software PLC.
RT02-103
1
RT02-104
RT02-107
5
Programming with ctrlX PLC
Engineering in Structured
Text (Online Training)
The training gives an overview of
the creation of PLC programs in
structured text.
2
Software Development Kit
Basic (Online Training)
Software Development Kit
Advanced
In this training course, you will
learn how to apply the software
development kit of
ctrlX AUTOMATION within
a suitable IDE.
In this training course, you will
learn how the examples of the
software development kit for ctrlX
AUTOMATION can be combined to
form a dedicated app.
IT security for mechanical engineering
RT02-105
1
IT-security for mechanical
engineering
This training provides insight into
the subject of IT security within an
industrial context.
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
If you are interested in online
training - please contact us!
Training.erbach@boschrexroth.de
16
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path PLC – IndraWorks/IndraLogic
BASIC
ADVANCED
SPECIALIST
5
RT02-300
RT02-306
Basic knowledge of
electric control
technology (eLearning)
Programming with
IndraWorks/IndraLogic
2G in structured text
This training is recommended for
anybody who is considering
working with control technology.
The training gives an overview of
the creation of PLC programs in
structured text.
RT02-301
3
Basic knowledge of PLC
technology
(2nd generation)
This training is recommended for
anybody who is considering
working with control technology.
RT02-302
RT02-305
5
RT02-307
3
Programming with
IndraWorks/IndraLogic 2G
Step chain
diagnostics 2G
The training gives an overview of
the use, application, and operation
of the IndraWorks engineering
software.
You will become familiar with the
ProVi message system and use it to
display user messages on the
diagnostics screen.
1
RT02-308
5
Advanced knowledge of PLC
technology (2nd generation)
Visualization with
WinStudio G2
In this training course, you will get to
know more complex programming
technologies and additional
diagnostic options.
This training course gives an
overview of the creation of
visualizations using WinStudio.
RT02-303
TARGET
4
Basic knowledge of
industrial Ethernet
The training course for anyone who
is considering to move over from
PROFIBUS DP to Ethernet-based
bus systems.
RT02-304
4
Basic knowledge of bus
technology
In this training you will learn how
to save time on elaborate wiring.
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
If you are interested in online
training - please contact us!
Training.erbach@boschrexroth.de
17
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path MPC/FTS
BASIC
ADVANCED
SPECIALIST
TARGET
2-4
RT14-001
MPC/YM –
Engineering
In this practical training you will
learn to work with the MPC/YM
platform
3-5
2-3
RT14-002
RT14-034
FTS –
Engineering
FTS –
Service & Support
In this practical training you will
get to know the Flexible Transport
System (FTS)
In this practical training course,
you will learn how to maintain and
support FTS components and
software at production locations.
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
18
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path MotionLogic MLD
BASIC
RT02-301
ADVANCED
3
RT02-305
5
Basic knowledge of
PLC technology
(2nd generation)
Programming with
IndraWorks/
IndraLogic 2G
This training is recommended for
anybody who is considering
working with control technology.
The training gives an overview of
the use, application, and operation
of the IndraWorks engineering
software.
RT02-204
RT02-601
SPECIALIST
TARGET
3
Programming
MLD-S and MLD-M 2G
From the function and properties
of the drive PLC to programming
according to IEC 61131-3
5
IndraDrive with
Multi-Ethernet interface
This training course will make it
easier for you to start working with
digital IndraDrive drive controllers.
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
19
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path CNC System MTX
BASIC
RT02-507
ADVANCED
4
Basic NC programming
with the Rexroth standard
user interface
This training course helps you to
become familiar with operation,
memory structure, and
programming.
RT02-301
RT02-202
3
IndraDrive – Diagnostics
and maintenance
This training course will
make it easier for you to start
working with digital IndraDrive
drive controllers.
RT02-504
SPECIALIST
TARGET
3
Maintaining and servicing
the MTX system with
Sercos II and Sercos III
This training conveys
knowledge that is necessary
for maintenance and servicing
of the CNC system MTX.
3
Basic knowledge of
PLC technology
(2nd generation)
This training is recommended for
anybody who is considering
working with control technology.
RT02-506
2
Operation with the
Rexroth standard user
interface
In this training, you will have the
opportunity to work through and
analyze exercises on a control.
RT02-507
4
Basic NC programming
with the Rexroth standard
user interface
This training course helps you to
become familiar with operation,
memory structure, and
programming.
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
20
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path CNC System MTX
BASIC
RT02-507
ADVANCED
4
RT02-204
5
Basic NC programming
with the Rexroth standard
user interface
IndraDrive with
Multi-Ethernet
interface
This training course helps you to
become familiar with operation,
memory structure, and
programming.
This training course will
make it easier for you to
start working with digital
IndraDrive drive controllers.
RT02-301
This training course
combines the courses
RT02-502 and RT02-503.
RT02-503
This training is recommended for
anybody who is considering
working with control technology.
5
Projecting of the MTX
system by NC and PLC
configuration with
Sercos
3
Basic knowledge of
PLC technology
(2nd generation)
RT02-201
RT02-501
SPECIALIST
SPECIALIST TARGET
4
Commissioning and
project planning of the
MTX CNC system with
Sercos III
The training course provides
you with an overview of the
second generation of the MTX
CNC system (with Sercos III).
RT02-502
4
Programming with
IndraLogic 2G
In this training course, you
will learn how to create
and configure an
IndraWorks project with
the MTX CNC control.
Optimizing and
increasing
availability
3
Basic knowledge of
electric drive technology
From the function and properties
of selected drive components to
current developments
RT02-308
3
Visualization with
WinStudio G2
This training course gives
an overview of the creation
of visualizations using
WinStudio.
4
RT02-507
Basic NC
programming with
the Rexroth standard
user interface
This training course helps
you to become familiar with
operation, memory
structure, and programming.
RT02-508
MTX – Cycle
time analyzer
The cycle time analyzer is an
important component of the
MTX Efficiency Workbench.
RT02-200
RT02-509
Basic knowledge of
electric drive technology
(eLearning)
MTX – Efficiency
workbench
From the function and properties
of selected drive components to
current developments (eLearning)
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
2
3
In this training course,
you will become familiar with the
functions of the MTX Efficiency
Workbench.
21
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path XLC/MLC
BASIC
BASIC
ADVANCED
SPECIALIST
TARGET
RT02-300
Basic knowledge of
electric control
technology (eLearning)
This training is recommended for
anybody who is considering
working with control technology.
RT02-305
5
5
RT02-401
Programming with
IndraWorks/IndraLogic 2G
MLC – Commissioning
and programming
The training gives an overview of
the use, application, and operation
of the IndraWorks engineering
software.
In this training you will learn the
project planning process of the
MLC automation system.
RT02-204
5
IndraDrive with
Multi-Ethernet interface
This training course will
make it easier for you to start
working with digital IndraDrive
drive controllers.
RT02-202
For anyone who wants to learn
about Open Core Interface
3
IndraDrive – Diagnostics
and maintenance
This training course will
make it easier for you to start
working with digital IndraDrive
drive controllers.
RT02-402
4
MLC – Maintenance
This training course teaches you
everything related to the
maintenance and service of the
entire MLC system.
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
RT02-403
3
XLC/MLC – Windows
programming with
open core interface
In this training course, you will
learn how to program Windows
applications based on Open Core
Interface (OCI).
If you are interested in online
training - please contact us!
Training.erbach@boschrexroth.de
22
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Safety
Technology
Pneumatics
Practical Error Analysis
RT04-004
ADVANCED
4
RT04-005
5
RT04-006
SPECIALIST
5
5
Basic knowledge of
hydraulics
Basic knowledge of on/off
valves
Function and properties of
selected components
Get to know operating behaviors
of industrial components
RT04-015
RT04-003
IH - Hydraulics for
beginners (eLearning)
Electrical engineering for
hydraulic engineers
Pumps, actuating units and
control equipment
Measurement and
analysis
With this basic training, you can refresh
and deepen your knowledge of electric
control systems and continuous control
valve technology; error analysis
Selection and correct handling
at the "heart" of the
hydraulic system
Use of measuring instruments in
hydraulically controlled machines
RT04-016
RT04-011
IH - Valve technology for
beginners (eLearning)
Electrification and
digitization
4
Basic knowledge of
continuous control valve
technology
RT04-002
Introduction to continuous control
valve technology; methodological
troubleshooting
RT04-010
3
3
Developing and optimizing
hydraulic control systems
Build complex functional sequences
and implementing them in exercises
and deepen them
Developing and optimizing the
functional specification;
troubleshooting and oil purity
analysis
RT04-007
5
4
HNC 100-3X NC control unit
– Introduction, handling,
optimization
Ensuring optimum closed-loop
control circuit setting
2
Hägglunds drive systems
Increasing of system availability
through competent handling of the
drive hydraulic system
RT04-028
5
System technology in
complex control systems
RT04-001
Interaction and linking of
systems/components with
electrical and digital units
RT04-027
RT04-020
TARGET
Certified expert in
industrial hydraulics
(Bosch Rexroth)
BASIC
RT04-023
2
RT04-008
4
Service and maintenance of
systems
Practical hydraulics control
technology
Imparting knowledge of basic pump
control structures for theoretical and
practical axial piston pumps
Deepening of control technology by
practical knowledge
4
Two-port cartridge valve
technology – Logic elements
Different constructions of the logic
elements and imparting of
corresponding knowledge with
practical application
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
23
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Project Planning
BASIC
RT04-004
ADVANCED
4
RT04-031
3
RT04-009
SPECIALIST
3
RT04-008
TARGET
4
Basic knowledge of
hydraulics
Project planning of on/off
valves
Planning and configuring
hydraulic systems
Practical hydraulics control
technology
Function and properties of
selected components
Product selection, parameterization
and circuit diagram design for
industrial project planning
Main steps of configuring
industrial hydraulics from
everyday practice
Deepening of control technology
by practical knowledge
RT04-015
IH – Hydraulics for
beginners (eLearning)
RT04-016
IH – Valve technology for
beginners
(eLearning)
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
24
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path Connected Hydraulics
BASIC
RT04-004
ADVANCED
4
Basic knowledge of hydraulics
Function and properties of selected
components
RT04-011
Electrification and
digitization
Interaction and linking of
systems/components with
electrical and digital units
RT04-015
IH – Hydraulics for
beginners
(eLearning)
RT04-016
IH – Valve technology for
beginners
(eLearning)
RT13-007
Basics for digital Transformation (eLearning)
Good understanding of digital
transformation and its technologies,
possibilities, and challenges
RT02-200
Basic knowledge of electric
drive technology
(eLearning)
Functions and properties of selected
drive components
3
RT04-034
SPECIALIST
3
RT04-024
2
VT-HMC hydraulic axis
controller/IAC
Multi-Ethernet valve
Motion control for
hydraulics – Programming the
VT-HMC motion controller
Structures of the best-in-class
controller. Hydraulic axes with the
IAC multi-Ethernet valve or the
VT-HMC motion controller.
Imparts knowledge on how to use the
motion controller programming
environment; motion sequences
based on IEC 61131-3 in IndraWorks
RT04-025
TARGET
5
IndraMotion MLC for
hydraulic drives
Integration of the hydraulics into the
overall system; programming of
motion sequences in a practical
manner
RT04-010
3
RT04-013
2
Pumps, actuating units
and control equipment
Modern electronics systems
for axial piston pumps
Selection and correct handling at the
"heart" of the hydraulic system
Imparting knowledge of basic pump
control structures for theoretical and
practical axial piston pumps
RT04-036
2
Servo-hydraulic axis –
Maintenance and repair
The servo-hydraulic axis sets new
standards in power density, energy
efficiency and quiet operation.
RT04-037
1
WIFF – Maintenance,
inspection, filling and
filter unit
WIFF power unit design, function,
and practical application
RT02-300
Basic knowledge of
electric control technology
(eLearning)
Functions and properties of the
electric control technology.
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
25
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Safety
Technology
Pneumatics
Learning Path Special Topics
BASIC
RT04-004
ADVANCED
4
Basic knowledge of hydraulics
Function and properties of selected
components
RT04-015
Hydraulics for
beginners
(eLearning)
RT04-026
3
RT04-023
SPECIALIST
3
Basic online training –
Reading circuit diagrams
Service and maintenance of
systems
Learn what information is provided in
the circuit diagram; the connection
between hydraulic and electric circuit
diagram and data sheet
Systematic approaches and practical
exercises; how to make systems
more productive technically or
organizationally
RT04-010
3
RT04-013
2
Pumps, actuating units and
control equipment
Modern electronics systems
for axial piston pumps
Selection and correct handling
at the "heart" of the
hydraulic system
Imparting knowledge of basic
pump control structures for
theoretical and practical
axial piston pumps
3
RT04-016
RT04-029
IH – Valve technology for
beginners
(eLearning)
Sealing technology for fluid
technology
Factors and rules when designing,
selecting, and installing seals
RT04-022
TARGET
1
Hydraulic fluids in
applications
Specific properties of base oils,
additives and standardization
RT04-021
2
Accumulators in systems
Pressure accumulator as energy
accumulator and system
improvement as well as safety
regulations
RT04-030
3
Imparting expert knowledge of
hydraulic accumulators to
persons qualified for
examination
Ordinance on Industrial Safety and
Health calls for training
RT04-012
2
Imparting expert knowledge of
hydraulic hose lines to persons
qualified for examination
Mandatory training course according
to BetrSichV [Ordinance on
Industrial Safety and Health].
RT04-032
1
Imparting expert knowledge of
hydraulic hose lines to persons
qualified for examination –
Refresher course
Regulations (BetrSichV, TRBS 1203)
call for refresher courses
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
26
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path Sytronix
BASIC
RT04-004
ADVANCED
4
RT02-202
3
RT04-013
SPECIALIST
2
Basic knowledge
of hydraulics
IndraDrive – Diagnostics
and maintenance
Modern electronics systems
for axial piston pumps
Function and properties of
selected components
This training course will make
it easier for you to start
working with digital IndraDrive
drive controllers.
Imparting knowledge of basic pump
control structures for theoretical and
practical axial piston pumps
RT04-017
RT04-015
TARGET
2
Sytronix SvP 7020 (p/Q
control) – Parameterization
and commissioning
IH – Hydraulics for
beginners
(eLearning)
Basic structures of the Sytronix
system SvP7020 (p/Q control) in
theory and practice
2
RT04-016
RT04-018
IH – Valve technology for
beginners
(eLearning)
Sytronix FcP/DRn 5020 –
Parameterization and
commissioning
Basic structures of the Sytronix
systems FcP5020 and DRn5020 in
theory and practice
3
RT02-200
RT04-010
Basic knowledge of
electric drive
technology (eLearning)
Pumps, actuating units
and control equipment
Functions and properties of selected
drive components
Selection and correct handling at the
"heart" of the hydraulic system
RT02-300
RT04-014
Basic knowledge of electric
control technology
(eLearning)
Commissioning
CytroPac
Functions and properties of the
electric control technology
2
Project planning, commissioning,
parameterization and network
connection in theory and practice
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
27
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path Linear Motion Technology
BASIC
RT05-001
ADVANCED
1
Basic knowledge of linear
technology (eLearning)
physical basics and up to application
RT05-002
RT05-008
3
Project planning of linear
technology components for
machine tools
Design and service life calculation of
linear technology components with
Linear Motion Designer (LMD)
Design using the example of machine
tools as well as the possibility to
consider your own practical example
RT05-006
TARGET
1
Service and maintenance
of linear systems
Basic knowledge of linear guides
Practical use of linear axes of
types MKK and CKR
1
Linear technology –
Screw drives
(eLearning)
RT05-007
1
Assembly and maintenance
profiled guide rails and ball
screw
Basic knowledge of threaded drives
RT05-004
2
Design of profiled guide
rails and ball screw
assemblies
1
Linear technology –
Linear guides
(eLearning)
RT05-003
RT05-005
SPECIALIST
Practical assembly and maintenance
of the components by means of
exercises
1
Linear technology –
Linear axes
(eLearning)
Basic knowledge of linear axes
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
28
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Safety
Technology
Pneumatics
Learning Path Mobile Hydraulics
BASIC
ADVANCED
2
SPECIALIST
RT06-039
TARGET
3
RT04-015
RT06-033
H – Hydraulics for
beginners (eLearning)
Basics of mobile hydraulics
and axial piston units
Controls and components
in closed-loop circuits
Basic principles of physics,
design of hydraulic systems and
components and their function
Basic knowledge of mobile hydraulics
and design and operation of
axial piston units in mobile
applications (incl. practice exercises)
Typical applications of closed
circuits in conjunction with
Rexroth products
RT06-011
Mobile Hydraulics Hydraulic circuits and
control types
Tasks, functions, and design of
closed and open-loop circuits
RT06-034
Valve technology –
Control blocks of mobile
hydraulics (eLearning)
Basics of axial piston units
in stationary and mobile
hydraulics
Tasks, functions, and design of
control blocks of different series
and types
Design, function, and operation of
axial piston units in stationary and
mobile applications
RT06-038
5
"Experience" mobile
hydraulics
Theory and practice of recognizing
the specific differences and
characteristics of the two types of
control in a training system
Expert for mobile
hydraulics
(Bosch Rexroth)
2
RT06-030
RT06-010
Mobile Hydraulics –
Gear units (eLearning)
Function and differences
of planetary gears
(driving, pivoting, lifting)
RT06-035
RT06-046
1
4
RT06-041
2
Controls and components
in open-loop circuits
LS and LUDV systems
compared and combined
Design, function, and properties of
relevant components and systems
Theory and practice of
recognizing specific differences
and characteristics of both
control types
Hydraulic fluids in mobile
applications
(Online Training)
Specific properties and
standardization of base oils and
additives and instructions for use
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
29
Our knowledge
for your
application
Highlights
Digital
Transformation
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path Mobile Hydraulics
BASIC
ADVANCED
INDIVIDUALLY BOOKABLE
PRODUCT TRAINING COURSES
RT06-031
2
RT06-043
SPECIALIST
1
1
Function and design of
the M4 control block
Function and design of the
M7 control block
Detailed knowledge of the M4
product family – Design and
functionality, characteristic curves,
and limits of use as well as the
flexibility of the M4 kit
Detailed knowledge of the product
M7 – Design and function,
characteristic curves, and limits of
use as well as flexibility of the
M7 control block
RT06-032
2
Function and design of A10
and A1
axial piston units
Function and design
of A4VSO and A15
axial piston units
Overview of the medium-pressure
units A1VO, A10VSO, A10VZO,
A10VM and their typical controllers
(incl. practical aspects)
Overview of the high-pressure units
A15VSO, A4VSO, A4VSG, A4CSG,
and A6VM and their typical
controllers (incl. practical aspects)
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
RT06-044
TARGET
30
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path Mobile Electronics
Insight into the electronification of
hydraulic applications and
systems, components as well as
configuration tools and application
software
1
2
RT06-019
RT06-003
BODAS service 4.0 flash
and service tool for
controllers of the series 40
BODAS controller
series 40 – Development
environment
Programming of series 40
RC controllers with C
Working with BODAS service for
RC40 - parameterization, analysis,
troubleshooting and
commissioning
Basic knowledge of RC40
controllers, insight into the
ecosystem and required tools
Development of the application
software and service app for RC40
control units (programming and
parameterization)
RT06-050
2
Programming of series 40
RC controllers with
Codesys
RT06-006
1
RT06-007
2
RT06-009
1
Introduction to the CAN
standard SAE J1939
eDA electronic drive
controller
The eDA electronic drive
controller in practice
Basic knowledge of the CAN
standard SAE J1939 and the
associated evaluation software
Presentation of the eDA system,
practical experience with the
components and the software and
configuration of a drive control
solution with BODAS service
Parameterization of a wheel
loader – Creation and loading of
the parameter file with subsequent
optimization of the driving
behavior
RT06-022
RT06-012-2
Functional safety in
electronic control units of
mobile hydraulics systems
(eLearning)
IoT solutions for mobile
machinery (eLearning)
Basics relating to mobile machinery
(standards DIN EN ISO 13849,
ISO 25119 and ISO 19014)
Characteristic challenges in the
field of IoT for mobile applications
including consideration of the
essential IoT elements
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
Programmers BR40
with C
Electronics in mobile
applications
RT06-005
TARGET
Development of the application
software and service app for RC40
control units (programming and
parameterization)
Programmer
BR40 in Codesys
2
SPECIALIST
Expert for
electro-hydraulic
drive systems
RT06-014
ADVANCED
Expert for BODAS
Connect
BASIC
31
Our knowledge
for your
application
Highlights
Digital
Transformation
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path Electrics
ADVANCED
3
RT06-017
RT06-018
eLION Basics –
Electrification of
mobile applications
eLION Advanced Electrification of
mobile applications
Basics of electrification and the
components used
Detailed knowledge of e-motors
and inverters as well as the
ctrlX control platform
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
SPECIALIST
TARGET
Designers for the
eLION product portfolio
BASIC
32
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path Welding Technology
BASIC
RT08-001
ADVANCED
1
Basic knowledge of
resistance welding
systems
This training course offers you an
easy introduction to resistance
welding systems
RT08-002
3
SPECIALIST
TARGET
2
RT08-003
Programming and servicing
with PSI6000 + BOS6000
PSI6000 with UI controllers
and maintenance
In this training course, you will get to
know the control system of the
PSI6000 family and the related
BOS6000 user interface.
In this training course, you will
become familiar how to use the UI
controller
RT08-004
2
Setting up and servicing the
PSI6000 with integrated
servo gun control
In this training course, you will
learn how to handle the servo
gun controller
RT08-005
3
PRC7x00 and PRI7x00
basics
In this training course, you will
become familiar with the control
system of the PRC7x00 family and
the related PRI7000 user interface
RT08-006
3
PRC7x00 + PRI7000
resistance welding basics
of process technology
In this training course, you will
learn about the production
process for steel
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
RT08-007
3
Expert training in resistance
spot welding with
Bosch Rexroth PRC7x00generation equipment
In this training you will deepen
your knowledge
RT08-008
2
PRC7x00 with integrated
servo gun control
In this training course, you will
learn how to handle the servo
gun controller
33
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path Tightening Technology
BASIC
RT09-001
ADVANCED
2
Basic knowledge of
tightening systems
This training course gives you an
introduction to tightening systems
RT09-002
SPECIALIST
TARGET
3
SE350 tightening system –
Transition course
(CS351 compact system and
350 multi-channel system)
During this training course, you will get
to know the differences between the
350 and 300/310 tightening systems.
RT09-003
5
350 tightening system –
Hardware, commissioning,
programming (single-channel
and multi-channel system)
You will become familiar with the
hardware of the 350 modular
tightening system and the
CS351 compact system.
RT09-004
3
CS351 tightening system
(single-channel system)
This training course introduces
you to different versions of the
CS351 compact system
(single-channel system).
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
34
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Pneumatics
Safety
Technology
Learning Path Pneumatics
BASIC
RT12-002
ADVANCED
4
Basic knowledge of
pneumatics and
electro-pneumatics
the function and properties of
components; circuit diagram design
RT12-004
SPECIALIST
TARGET
4
Electro-pneumatics and
bus systems
Basic principles of
electro-pneumatics in
conjunction with bus-controlled
valve manifold systems.
3
RT12-001
RT12-003
Basic knowledge of
pneumatics (eLearning)
Pneumatics – Maintenance
and troubleshooting
the function and properties of
components; circuit diagram design
Refresher course electro-pneumatics
with focus on fault analysis
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
35
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Mobile Hydraulics
Resistance
Welding
Tightening
Systems
Safety
Technology
Pneumatics
Learning Path Safety Technology
BASIC
RT14-003/RT14-006
ADVANCED
1
RT14-016
SPECIALIST
1
Basic knowledge of
machine safety
Risk assessment of
machinery
Aspects of the Machinery Directive
and basic understanding of the
Implementation Directive
Evaluating the hazards that occur
when handling machines in theory
and practice
RT14-006
3
RT14-016
2
Safe hydraulics according
to DIN EN ISO 13849 safely
implement
Safety principles of hydraulics;
consideration of safety-relevant
circuits in theory and practice
1
Online training –
knowledge of machine safety
Risk assessment of
machinery
Aspects of the Machinery Directive
and basic understanding of the
Implementation Directive
Evaluating the hazards that occur
when handling machines in theory
and practice
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
RT14-017
TARGET
36
Our knowledge
for your
application
Digital
Transformation
Highlights
Assembly
Technology
Electric Drives
and Controls
Industrial
Hydraulics
Linear Motion
Technology
Resistance
Welding
Mobile Hydraulics
Tightening
Systems
Safety
Technology
Pneumatics
Learning Path Safety Technology
BASIC
ADVANCED
SPECIALIST
RT04-032
RT14-003/RT14-006
1
Basic knowledge of
machine safety
Aspects of the Machinery Directive
and basic understanding of the
Implementation Directive
RT02-603
RT14-016/
RT14-007
1
Risk assessment
of machinery
Evaluating the hazards
that occur when
handling machines in
theory and practice
3
RT14-017
2
Safe hydraulics
according to DIN
EN ISO 13849
safely implement
Safety principles of
hydraulics and
consideration of
safety-relevant circuits
in theory and practice
SafeLogic – Commissioning
& project planning
RT04-023
3
Service and
maintenance of
systems
Systematic approaches
and practical exercises
on how to make
systems more
productive technically
or organizationally
1
RT14-009
TARGET
2
Imparting expert knowledge of
hydraulic hose lines to persons
qualified for examination –
Refresher course
Online safety during
commissioning and
maintenance of hydraulic
systems-DE-S
Regulations (BetrSichV, TRBS 1203)
call for refresher courses
Information for maintenance personnel
and their managers and planners of
hydraulic systems/machines
RT04-030
3
RT04-012
2
Imparting expert
knowledge of
hydraulic
accumulators to
persons qualified
for examination
Imparting expert
knowledge of
hydraulic hose
lines to persons
qualified for
examination
Ordinance on
Industrial Safety and
Health calls for training
Mandatory training
course according to
BetrSichV [Ordinance
on Industrial Safety and
Health].
RT14-038
2
Safety during
commissioning and
maintenance of
hydraulic systems
Practical safety technology to
make machinery more resilient
in terms of hazards
Project planning, programming,
commissioning, diagnostics and
troubleshooting of the entire
safety solution.
RT14-034
2
FTS – Service & support
Aspects of the Machinery Directive
and basic understanding of the
Implementation Directive
RT14-016
2
Risk assessment of
machinery
Evaluating the hazards that occur
when handling machines.
In theory and practice
Bosch Rexroth AG, R999000291 | Version 2023-02/EN
37
Please contact us:
Do you have any other questions
about our training courses?
We would be happy to advise you.
+49 9352 18-19-20
training@boschrexroth.de
CONTACT FORM