ETSI TS 136 508 V15.5.0 (2019-07)
TECHNICAL SPECIFICATION
LTE;
Evolved Universal Terrestrial Radio Access (E-UTRA) and
Evolved Packet Core (EPC);
Common test environments for User Equipment (UE)
conformance testing
(3GPP TS 36.508 version 15.5.0 Release 15)
3GPP TS 36.508 version 15.5.0 Release 15
1
ETSI TS 136 508 V15.5.0 (2019-07)
Reference
RTS/TSGR-0536508vf50
Keywords
LTE
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
GSM® and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
2
ETSI TS 136 508 V15.5.0 (2019-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Legal Notice
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities. These shall be
interpreted as being references to the corresponding ETSI deliverables.
The cross reference between 3GPP and ETSI identities can be found under http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
3
ETSI TS 136 508 V15.5.0 (2019-07)
Contents
Intellectual Property Rights ................................................................................................................................2
Legal Notice .......................................................................................................................................................2
Modal verbs terminology....................................................................................................................................2
Foreword...........................................................................................................................................................27
Introduction ......................................................................................................................................................27
1
Scope ......................................................................................................................................................28
2
References ..............................................................................................................................................28
3
Definitions, symbols and abbreviations .................................................................................................31
3.1
3.2
3.3
4
Definitions ........................................................................................................................................................ 31
Symbols ............................................................................................................................................................ 31
Abbreviations ................................................................................................................................................... 31
Common test environment .....................................................................................................................32
4.1
Environmental conditions ................................................................................................................................. 32
4.1.1
Temperature ................................................................................................................................................ 32
4.1.2
Voltage........................................................................................................................................................ 32
4.2
Common requirements of test equipment ......................................................................................................... 33
4.2.1
General functional requirements ................................................................................................................. 33
4.2.2
Minimum functional requirements ............................................................................................................. 34
4.2.2.1
Supported Cell Configuration ............................................................................................................... 34
4.2.2.1.1
Supported Channels ......................................................................................................................... 34
4.2.2.2
Support of Tcell timing offset ................................................................................................................. 35
4.2.2.3
Supported Sidelink Configuration ......................................................................................................... 35
4.2.2.3.1
Supported Sidelink Channels........................................................................................................... 35
4.3
Reference test conditions .................................................................................................................................. 36
4.3.1
Test frequencies .......................................................................................................................................... 36
4.3.1.1
FDD Mode Test frequencies ................................................................................................................. 40
4.3.1.1.1
FDD reference test frequencies for operating band 1 ...................................................................... 40
4.3.1.1.1A
FDD reference test frequencies for CA in operating band 1............................................................ 41
4.3.1.1.2
FDD reference test frequencies for operating band 2 ...................................................................... 41
4.3.1.1.2A
FDD reference test frequencies for CA in operating band 2............................................................ 42
4.3.1.1.3
FDD reference test frequencies for operating band 3 ...................................................................... 44
4.3.1.1.3A
FDD reference test frequencies for CA in operating band 3............................................................ 44
4.3.1.1.4
FDD reference test frequencies for operating band 4 ...................................................................... 45
4.3.1.1.4A
FDD reference test frequencies for CA in operating band 4............................................................ 46
4.3.1.1.5
FDD reference test frequencies for operating band 5 ...................................................................... 47
4.3.1.1.5A
FDD reference test frequencies for CA in operating band 5............................................................ 47
4.3.1.1.6
FDD reference test frequencies for operating band 6 ...................................................................... 48
4.3.1.1.7
FDD reference test frequencies for operating band 7 ...................................................................... 48
4.3.1.1.7A
FDD reference test frequencies for CA in operating band 7............................................................ 49
4.3.1.1.8
FDD reference test frequencies for operating band 8 ...................................................................... 50
4.3.1.1.8A
FDD reference test frequencies for CA in operating band 8............................................................ 51
4.3.1.1.9
FDD reference test frequencies for operating band 9 ...................................................................... 51
4.3.1.1.10
FDD reference test frequencies for operating band 10 .................................................................... 51
4.3.1.1.11
FDD reference test frequencies for operating band 11 .................................................................... 52
4.3.1.1.12
FDD reference test frequencies for operating band 12 .................................................................... 52
4.3.1.1.12A
FDD reference test frequencies for CA in operating band 12.......................................................... 52
4.3.1.1.13
FDD reference test frequencies for operating band 13 .................................................................... 53
4.3.1.1.14
FDD reference test frequencies for operating band 14 .................................................................... 53
4.3.1.1.15
FDD reference test frequencies for operating band 15 .................................................................... 53
4.3.1.1.16
FDD reference test frequencies for operating band 16 .................................................................... 53
4.3.1.1.17
FDD reference test frequencies for operating band 17 .................................................................... 53
4.3.1.1.18
FDD reference test frequencies for operating band 18 .................................................................... 54
4.3.1.1.19
FDD reference test frequencies for operating band 19 .................................................................... 54
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.20
4.3.1.1.21
4.3.1.1.22
4.3.1.1.23
4.3.1.1.23A
4.3.1.1.24
4.3.1.1.25
4.3.1.1.25A
4.3.1.1.26
4.3.1.1.27
4.3.1.1.27A
4.3.1.1.28
4.3.1.1.29
4.3.1.1.31
4.3.1.1.32
4.3.1.1.33 to
4.3.1.1.65
4.3.1.1.66
4.3.1.1.66A
4.3.1.1.67
4.3.1.1.68
4.3.1.1.69
4.3.1.1.70
4.3.1.1.70A
4.3.1.1.71
4.3.1.1.72
4.3.1.1.73
4.3.1.1.74
4.3.1.2
4.3.1.2.1
4.3.1.2.2
4.3.1.2.3
4.3.1.2.4
4.3.1.2.5
4.3.1.2.6
4.3.1.2.6A
4.3.1.2.7
4.3.1.2.7A
4.3.1.2.8
4.3.1.2.8A
4.3.1.2.9
4.3.1.2.9A
4.3.1.2.10
4.3.1.2.10A
4.3.1.2.11
4.3.1.2.12
4.3.1.2.13
4.3.1.2.14
4.3.1.2.14A
4.3.1.2.15
4.3.1.2.16
4.3.1.2.16A
4.3.1.3
4.3.1.3.1
4.3.1.3.2
4.3.1.3.3
4.3.1.3.4
4.3.1.3.5
4.3.1.3.6
4.3.1.3.7
4
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for operating band 20 .................................................................... 54
FDD reference test frequencies for operating band 21 .................................................................... 55
FDD reference test frequencies for operating band 22 .................................................................... 55
FDD reference test frequencies for operating band 23 .................................................................... 55
FDD reference test frequencies for CA in operating band 23.......................................................... 56
FDD reference test frequencies for operating band 24 .................................................................... 56
FDD reference test frequencies for operating band 25 .................................................................... 56
FDD reference test frequencies for CA in operating band 25.......................................................... 57
FDD reference test frequencies for operating band 26 .................................................................... 57
FDD reference test frequencies for operating band 27 .................................................................... 58
FDD reference test frequencies for CA in operating band 27.......................................................... 58
FDD reference test frequencies for operating band 28 .................................................................... 59
FDD reference test frequencies for CA in operating band 29.......................................................... 60
FDD reference test frequencies for operating band 31 .................................................................... 60
FDD reference test frequencies for CA in operating band 32.......................................................... 60
4.3.1.1.64 ..................................................................................................................................... Void
......................................................................................................................................................... 61
FDD reference test frequencies for operating band 65 .................................................................... 61
FDD reference test frequencies for operating band 66 .................................................................... 62
FDD reference test frequencies for CA in operating band 66.......................................................... 63
FDD reference test frequencies for CA in operating band 67.......................................................... 81
FDD reference test frequencies for operating band 68 .................................................................... 83
FDD reference test frequencies for operating band 69 .................................................................... 83
FDD reference test frequencies for operating band 70 .................................................................... 83
FDD reference test frequencies for CA in operating band 70.......................................................... 84
FDD reference test frequencies for operating band 71 .................................................................... 84
FDD reference test frequencies for operating band 72 .................................................................... 84
Void ................................................................................................................................................. 85
FDD reference test frequencies for operating band 74 .................................................................... 85
TDD Mode Test frequencies ................................................................................................................. 85
TDD reference test frequencies for Operating Band 33 .................................................................. 85
TDD reference test frequencies for Operating Band 34 .................................................................. 85
TDD reference test frequencies for Operating Band 35 .................................................................. 86
TDD reference test frequencies for Operating Band 36 .................................................................. 86
TDD reference test frequencies for Operating Band 37 .................................................................. 86
TDD reference test frequencies for Operating Band 38 .................................................................. 87
TDD reference test frequencies for CA in operating band 38 ......................................................... 87
TDD reference test frequencies for Operating Band 39 .................................................................. 87
TDD reference test frequencies for CA in Operating Band 39 ........................................................ 88
TDD reference test frequencies for Operating Band 40 .................................................................. 88
TDD reference test frequencies for CA in operating band 40 ......................................................... 89
TDD reference test frequencies for Operating Band 41 .................................................................. 95
TDD reference test frequencies for CA in operating band 41 ......................................................... 95
TDD reference test frequencies for Operating Band 42 ................................................................ 109
TDD reference test frequencies for CA in operating band 42 ....................................................... 109
TDD reference test frequencies for Operating Band 43 ................................................................ 118
TDD reference test frequencies for Operating Band 44 ................................................................ 118
TDD reference test frequencies for Operating Band 45 ................................................................ 118
TDD reference test frequencies for Operating Band 46 ................................................................ 119
TDD reference test frequencies for CA in operating Band 46 ....................................................... 119
TDD reference test frequencies for Operating Band 47 ................................................................ 120
TDD reference test frequencies for Operating Band 48 ................................................................ 121
TDD reference test frequencies for CA in operating band 48 ....................................................... 121
HRPD Test frequencies ....................................................................................................................... 123
HRPD test frequencies for Band Class 0 ....................................................................................... 123
HRPD test frequencies for Band Class 1 ....................................................................................... 123
HRPD test frequencies for Band Class 3 ....................................................................................... 123
HRPD test frequencies for Band Class 4 ....................................................................................... 123
HRPD test frequencies for Band Class 6 ....................................................................................... 123
HRPD test frequencies for Band Class 10 ..................................................................................... 124
HRPD test frequencies for Band Class 15 ..................................................................................... 124
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.4
4.3.1.4.1
4.3.1.4.2
4.3.1.4.3
4.3.1.4.4
4.3.1.4.5
4.3.1.4.6
4.3.1.4.7
4.3.1.5
4.3.1.5.1
4.3.1.5.2
4.3.1.5.3
4.3.1.5.4
4.3.1.5.5
4.3.1.5.6
4.3.1.5.7
4.3.1.5.8
4.3.1.5.9
4.3.1.5.10
4.3.1.5.11
4.3.1.5.12
4.3.1.5.13
4.3.1.5.14
4.3.1.5.15
4.3.1.5.16
4.3.1.5.17
4.3.1.5.18
4.3.1.5.19
4.3.1.5.20
4.3.1.5.21
4.3.1.5.22
4.3.1.5.23
4.3.1.5.24
4.3.1.5.25
4.3.1.5.26
4.3.1.5.27
4.3.1.5.28
4.3.1.6
4.3.1.6.1
4.3.1.6.2
4.3.2
4.3.2.1
4.3.3
4.3.3.1
4.3.3.2
4.3.3.3
4.3.3.4
4.3.3.5
4.3.4
4.3.4.1
4.3.4.2
4.3.5
4.3.5.1
4.3.5.2
4.3.6
4.3.6.1
4.3.6.1.1
4.3.6.1.1A
4.3.6.1.1B
4.3.6.1.1C
4.3.6.1.2
4.3.6.1.3
5
ETSI TS 136 508 V15.5.0 (2019-07)
1xRTT Test frequencies ...................................................................................................................... 124
1xRTT test frequencies for Band Class 0 ...................................................................................... 124
1xRTT test frequencies for Band Class 1 ...................................................................................... 124
1xRTT test frequencies for Band Class 3 ...................................................................................... 124
1xRTT test frequencies for Band Class 4 ...................................................................................... 125
1xRTT test frequencies for Band Class 6 ...................................................................................... 125
1xRTT test frequencies for Band Class 10 .................................................................................... 125
1xRTT test frequencies for Band Class 15 .................................................................................... 125
MFBI Test frequencies ........................................................................................................................ 125
MFBI Test frequencies for operation band 2 overlapping with band 25 ....................................... 125
MFBI Test frequencies for operation band 3 overlapping with band 9 ......................................... 126
MFBI Test frequencies for operation band 4 overlapping with band 10 ....................................... 126
MFBI Test frequencies for operation band 5 overlapping with band 18 ....................................... 126
MFBI Test frequencies for operation band 5 overlapping with band 19 ....................................... 127
MFBI Test frequencies for operation band 5 overlapping with band 26 ....................................... 127
MFBI Test frequencies for operation band 9 overlapping with band 3 ......................................... 127
MFBI Test frequencies for operation band 10 overlapping with band 4 ....................................... 127
MFBI Test frequencies for operation band 12 overlapping with band 17 ..................................... 127
MFBI Test frequencies for operation band 17 overlapping with band 12 ..................................... 128
MFBI Test frequencies for operation band 18 overlapping with band 5 ....................................... 128
MFBI Test frequencies for operation band 18 overlapping with band 26 ..................................... 128
MFBI Test frequencies for operation band 18 overlapping with band 27 ..................................... 128
MFBI Test frequencies for operation band 19 overlapping with band 5 ....................................... 128
MFBI Test frequencies for operation band 19 overlapping with band 26 ..................................... 128
MFBI Test frequencies for operation band 25 overlapping with band 2 ....................................... 129
MFBI Test frequencies for operation band 26 overlapping with band 5 ....................................... 129
MFBI Test frequencies for operation band 26 overlapping with band 18 ..................................... 129
MFBI Test frequencies for operation band 26 overlapping with band 19 ..................................... 130
MFBI Test frequencies for operation band 26 overlapping with band 27 ..................................... 130
MFBI Test frequencies for operation band 27 overlapping with band 18 ..................................... 131
MFBI Test frequencies for operation band 27 overlapping with band 26 ..................................... 131
MFBI Test frequencies for operation band 33 overlapping with band 39 ..................................... 131
MFBI Test frequencies for operation band 38 overlapping with band 41 ..................................... 131
MFBI Test frequencies for operation band 39 overlapping with band 33 ..................................... 131
MFBI Test frequencies for operation band 41 overlapping with band 38 ..................................... 132
MFBI Test frequencies for operation band 66 overlapping with band 4 ....................................... 132
MFBI Test frequencies for operation band 66 overlapping with band 10 ..................................... 132
WLAN Test frequencies ..................................................................................................................... 133
WLAN Test frequencies for 2.4 GHz ISM Band .......................................................................... 133
WLAN Test frequencies for 5 GHz ISM Band ............................................................................. 133
Radio conditions ....................................................................................................................................... 133
Normal propagation condition ............................................................................................................ 133
Physical channel allocations ..................................................................................................................... 133
Antennas ............................................................................................................................................. 133
Downlink physical channels and physical signals............................................................................... 133
Mapping of downlink physical channels and signals to physical resources ........................................ 134
Uplink physical channels and physical signals ................................................................................... 140
Mapping of uplink physical channels and signals to physical resources ............................................. 140
Signal levels .............................................................................................................................................. 140
Downlink signal levels ........................................................................................................................ 140
Uplink signal levels ............................................................................................................................. 141
Standard test signals.................................................................................................................................. 141
Downlink test signals .......................................................................................................................... 141
Uplink test signals ............................................................................................................................... 141
Physical layer parameters ......................................................................................................................... 141
Downlink physical layer parameters ................................................................................................... 141
Physical layer parameters for DCI format 0 .................................................................................. 141
Physical layer parameters for DCI format 0C ............................................................................... 142
Physical layer parameters for DCI format 0A ............................................................................... 143
Physical layer parameters for DCI format 0B ............................................................................... 143
Physical layer parameters for DCI format 1 .................................................................................. 144
Physical layer parameters for DCI format 1A ............................................................................... 144
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
6
ETSI TS 136 508 V15.5.0 (2019-07)
4.3.6.1.3A
Physical layer parameters for DCI format 1B ............................................................................... 145
4.3.6.1.4
Physical layer parameters for DCI format 1C ............................................................................... 145
4.3.6.1.5
Physical layer parameters for DCI format 2 .................................................................................. 146
4.3.6.1.6
Physical layer parameters for DCI format 2A ............................................................................... 147
4.3.6.1.6A
Physical layer parameters for DCI format 3B ............................................................................... 147
4.3.6.1.6B
Physical layer parameters for DCI format 4A ............................................................................... 148
4.3.6.1.6C
Physical layer parameters for DCI format 4B ............................................................................... 148
4.3.6.1.7
Physical layer parameters for DCI format 5 .................................................................................. 149
4.3.6.1.7A
Physical layer parameters for DCI format 5A ............................................................................... 149
4.3.6.1.8
Physical layer parameters for DCI format 6-0A ............................................................................ 149
4.3.6.1.9
Physical layer parameters for DCI format 6-0B ............................................................................ 151
4.3.6.1.10
Physical layer parameters for DCI format 6-1A ............................................................................ 152
4.3.6.1.11
Physical layer parameters for DCI format 6-1B ............................................................................ 154
4.3.6.1.12
Physical layer parameters for DCI format 6-2 ............................................................................... 155
4.4
Reference system configurations .................................................................................................................... 155
4.4.1
Simulated network scenarios .................................................................................................................... 155
4.4.1.1
Single cell network scenarios .............................................................................................................. 155
4.4.1.2
E-UTRA single mode multi cell network scenarios ............................................................................ 155
4.4.1.3
E-UTRA dual mode multi cell network scenarios .............................................................................. 156
4.4.1.4
3GPP Inter-RAT network scenarios .................................................................................................... 156
4.4.1.5
3GPP2 Inter-RAT network scenarios .................................................................................................. 156
4.4.1.6
WLAN Inter-RAT network scenarios ................................................................................................. 156
4.4.2
Simulated cells .......................................................................................................................................... 156
4.4.3
Common parameters for simulated E-UTRA cells ................................................................................... 163
4.4.3.1
Common configurations of system information blocks ...................................................................... 163
4.4.3.1.1
Combinations of system information blocks ................................................................................. 163
4.4.3.1.2
Scheduling of system information blocks ...................................................................................... 168
4.4.3.2
Common contents of system information messages ........................................................................... 173
MasterInformationBlock ..................................................................................................................... 173
SystemInformation .............................................................................................................................. 174
SystemInformation-BR-r13 ................................................................................................................. 174
SystemInformationBlockType1 ............................................................................................................ 176
SystemInformationBlockType1-BR-r13 ............................................................................................... 179
4.4.3.3
Common contents of system information blocks ................................................................................ 183
SystemInformationBlockType2 ............................................................................................................ 183
SystemInformationBlockType3 ............................................................................................................ 186
SystemInformationBlockType4 ............................................................................................................ 187
SystemInformationBlockType5 ............................................................................................................ 187
SystemInformationBlockType6 ............................................................................................................ 191
SystemInformationBlockType7 ............................................................................................................ 193
SystemInformationBlockType8 ............................................................................................................ 194
SystemInformationBlockType9 ............................................................................................................ 197
SystemInformationBlockType10 .......................................................................................................... 197
SystemInformationBlockType11 .......................................................................................................... 199
SystemInformationBlockType12 .......................................................................................................... 201
SystemInformationBlockType13 .......................................................................................................... 202
SystemInformationBlockType14 .......................................................................................................... 202
SystemInformationBlockType15 .......................................................................................................... 203
SystemInformationBlockType17 .......................................................................................................... 204
SystemInformationBlockType18 .......................................................................................................... 204
SystemInformationBlockType19 .......................................................................................................... 211
SystemInformationBlockType20 .......................................................................................................... 216
SystemInformationBlockType21 .......................................................................................................... 216
SystemInformationBlockType24 .......................................................................................................... 217
4.4.3.4
Channel-bandwidth-dependent parameters in system information blocks .......................................... 220
4.4.4
Common parameters for simulated UTRA cells ....................................................................................... 221
4.4.4.1
Common contents of system information blocks for UTRA cells ...................................................... 221
System Information Block type 19...................................................................................................... 221
4.4.4.2
UTRA SIB scheduling for inter EUTRA - UTRA test ........................................................................ 225
4.4.4.3
UTRA SIB scheduling for inter EUTRA – UTRA - GERAN test ...................................................... 225
4.4.5
Common parameters for simulated GERAN cells .................................................................................... 226
4.4.6
Common parameters for simulated CDMA2000 cells .............................................................................. 229
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
7
ETSI TS 136 508 V15.5.0 (2019-07)
4.4.7
Default parameters specific for simulated cells ........................................................................................ 230
4.4.7.1
Common contents of HRPD Overhead messages ............................................................................... 230
4.4.7.2
Common contents of 1XRTT Overhead messages ............................................................................. 235
4.4.7.2.1
Configuration sequence number .................................................................................................... 235
4.4.7.2.2
Over Head messages...................................................................................................................... 236
4.4.8
Common parameters for simulated WLAN AP’s ..................................................................................... 245
4.5
Generic procedures ......................................................................................................................................... 246
4.5.1
UE test states............................................................................................................................................. 246
4.5.2
UE Registration (State 2) .......................................................................................................................... 252
4.5.2.1
Initial conditions ................................................................................................................................. 253
4.5.2.2
Definition of system information messages ........................................................................................ 253
4.5.2.3
Procedure ............................................................................................................................................ 254
4.5.2.4
Specific message contents ................................................................................................................... 257
4.5.2A
UE Registration, UE Test Mode Activated (State 2A) ............................................................................. 260
4.5.2A.1
Initial conditions ................................................................................................................................. 260
4.5.2A.2
Definition of system information messages ........................................................................................ 260
4.5.2A.3
Procedure ............................................................................................................................................ 261
4.5.2A.4
Specific message contents ................................................................................................................... 264
4.5.2AA
UE Registration in cell supporting BL/CE UE (State 2-CE) .................................................................... 264
4.5.2AA.1
Initial conditions ................................................................................................................................. 264
4.5.2AA.2
Definition of system information messages ........................................................................................ 264
4.5.2AA.3
Procedure ............................................................................................................................................ 265
4.5.2AA.4
Specific message contents ................................................................................................................... 265
4.5.2AB
UE Registration, UE Test Mode Activated in cell supporting BL/CE UE (State 2A-CE)........................ 265
4.5.2AB.1
Initial conditions ................................................................................................................................. 265
4.5.2AB.2
Definition of system information messages ........................................................................................ 265
4.5.2AB.3
Procedure ............................................................................................................................................ 266
4.5.2AB.4
Specific message contents ................................................................................................................... 266
4.5.2B
UE Registration, pre-registration on HRPD (State 2B) ............................................................................ 266
4.5.2B.1
Initial conditions ................................................................................................................................. 266
4.5.2B.2
Definition of system information messages ........................................................................................ 266
4.5.2B.3
Procedure ............................................................................................................................................ 267
4.5.2B.4
Specific message contents ................................................................................................................... 272
4.5.2C
UE Registration, pre-registration on 1xRTT (State 2C) ........................................................................... 273
4.5.2C.1
Initial conditions ................................................................................................................................. 273
4.5.2C.2
Definition of system information messages ........................................................................................ 273
4.5.2C.3
Procedure ............................................................................................................................................ 275
4.5.2C.4
Specific message contents ................................................................................................................... 275
4.5.2D
UE Registration, 2 PDN for RAN Assisted WLAN Interworking (State 2) ............................................. 281
4.5.2D.1
Initial conditions ................................................................................................................................. 281
4.5.2D.2
Definition of system information messages ........................................................................................ 281
4.5.2D.3
Procedure ............................................................................................................................................ 282
4.5.2D.4
Specific message contents ................................................................................................................... 282
4.5.3
Generic Radio Bearer Establishment (State 3).......................................................................................... 284
4.5.3.1
Initial conditions ................................................................................................................................. 284
4.5.3.2
Definition of system information messages ........................................................................................ 284
4.5.3.3
Procedure ............................................................................................................................................ 285
4.5.3.4
Specific message contents ................................................................................................................... 287
4.5.3A
Generic Radio Bearer Establishment, UE Test Mode Activated (State 3A) ............................................. 287
4.5.3A.1
Initial conditions ................................................................................................................................. 287
4.5.3A.2
Definition of system information messages ........................................................................................ 287
4.5.3A.3
Procedure ............................................................................................................................................ 288
4.5.3A.4
Specific message contents ................................................................................................................... 288
4.5.3AA
Generic Radio Bearer Establishment (State 3-CE) ................................................................................... 288
4.5.3AA.1
Initial conditions ................................................................................................................................. 288
4.5.3AA.2
Definition of system information messages ........................................................................................ 288
4.5.3AA.3
Procedure ............................................................................................................................................ 288
4.5.3AA.4
Specific message contents ................................................................................................................... 288
4.5.3AB
Generic Radio Bearer Establishment, UE Test Mode Activated (State 3A-CE) ...................................... 288
4.5.3AB.1
Initial conditions ................................................................................................................................. 288
4.5.3AB.2
Definition of system information messages ........................................................................................ 289
4.5.3AB.3
Procedure ............................................................................................................................................ 289
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.3AB.4
4.5.3B
4.5.3B.1
4.5.3B.2
4.5.3B.3
4.5.3B.4
4.5.3C
4.5.3C.1
4.5.3C.2
4.5.3C.3
4.5.3C.4
4.5.3D
4.5.3D.1
4.5.3D.2
4.5.3D.3
4.5.3D.4
4.5.3E
4.5.3E.1
4.5.3E.2
4.5.3E.3
4.5.3E.4
4.5.3EA
4.5.3EA.1
4.5.3EA.2
4.5.3EA.3
4.5.3EA.4
4.5.3F
4.5.3F.1
4.5.3F.2
4.5.3F.3
4.5.3F.4
4.5.3FA
4.5.3FA.1
4.5.3FA.2
4.5.3FA.3
4.5.3FA.4
4.5.4
4.5.4.1
4.5.4.2
4.5.4.3
4.5.4.4
4.5.4A
4.5.4A.1
4.5.4A.2
4.5.4A.3
4.5.4A.4
4.5.4B
4.5.4B.1
4.5.4B.2
4.5.4B.3
4.5.4B.4
4.5.5
4.5.5.1
4.5.5.2
4.5.5.3
4.5.5.4
4.5.5A
4.5.5A.1
4.5.5A.2
4.5.5A.3
4.5.5A.4
4.5.6
8
ETSI TS 136 508 V15.5.0 (2019-07)
Specific message contents ................................................................................................................... 289
Generic Radio Bearer Establishment, pre-registered on HRPD (State 3B) .............................................. 289
Initial conditions ................................................................................................................................. 289
Definition of system information messages ........................................................................................ 289
Procedure ............................................................................................................................................ 289
Specific message contents ................................................................................................................... 289
Generic Radio Bearer Establishment, pre-registered on 1xRTT (State 3C) ............................................. 289
Initial conditions ................................................................................................................................. 289
Definition of system information messages ........................................................................................ 290
Procedure ............................................................................................................................................ 290
Specific message contents ................................................................................................................... 290
Generic Radio Bearer Establishment for RAN Assisted WLAN Interworking (State 3) ......................... 290
Initial conditions ................................................................................................................................. 290
Definition of system information messages ........................................................................................ 290
Procedure ............................................................................................................................................ 291
Specific message contents ................................................................................................................... 291
Control plane CIoT connection request (State 3-CP) ............................................................................... 291
Initial conditions ................................................................................................................................. 291
Definition of system information messages ........................................................................................ 291
Procedure ............................................................................................................................................ 292
Specific message contents ................................................................................................................... 292
Control plane CIoT connection request, UE Test Mode Activated (State 3A-CP) ................................... 292
Initial conditions ................................................................................................................................. 292
Definition of system information messages ........................................................................................ 292
Procedure ............................................................................................................................................ 292
Specific message contents ................................................................................................................... 292
User plane CIoT connection request (State 3-UP) .................................................................................... 293
Initial conditions ................................................................................................................................. 293
Definition of system information messages ........................................................................................ 293
Procedure ............................................................................................................................................ 293
Specific message contents ................................................................................................................... 293
User plane CIoT connection request, UE Test Mode Activated (State 3A-UP) ....................................... 293
Initial conditions ................................................................................................................................. 293
Definition of system information messages ........................................................................................ 294
Procedure ............................................................................................................................................ 294
Specific message contents ................................................................................................................... 294
Loopback Activation (State 4) .................................................................................................................. 294
Initial conditions ................................................................................................................................. 294
Definition of system information messages ........................................................................................ 294
Procedure ............................................................................................................................................ 294
Specific message contents ................................................................................................................... 294
Loopback Activation in cell supporting BL/CE UE (State 4-CE) ............................................................ 294
Initial conditions ................................................................................................................................. 294
Definition of system information messages ........................................................................................ 295
Procedure ............................................................................................................................................ 295
Specific message contents ................................................................................................................... 295
Loopback Activation user plane (State 4A-UP)........................................................................................ 295
Initial conditions ................................................................................................................................. 295
Definition of system information messages ........................................................................................ 295
Procedure ............................................................................................................................................ 295
Specific message contents ................................................................................................................... 295
HRPD registration (State H2) ................................................................................................................... 296
Initial conditions ................................................................................................................................. 296
Definition of system information messages ........................................................................................ 296
Procedure ............................................................................................................................................ 296
Specific message contents ................................................................................................................... 296
HRPD registration, pre-registration on E-UTRAN (State H2A) .............................................................. 296
Initial conditions ................................................................................................................................. 296
Definition of system information messages ........................................................................................ 296
Procedure ............................................................................................................................................ 296
Specific message contents ................................................................................................................... 296
HRPD session establishment (State H3) ................................................................................................... 297
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
9
ETSI TS 136 508 V15.5.0 (2019-07)
4.5.6.1
Initial conditions ................................................................................................................................. 297
4.5.6.2
Definition of system information messages ........................................................................................ 297
4.5.6.3
Procedure ............................................................................................................................................ 297
4.5.6.4
Specific message contents ................................................................................................................... 297
4.5.6A
HRPD session establishment, pre-registered on E-UTRAN (State H3A)................................................. 297
4.5.6A.1
Initial conditions ................................................................................................................................. 297
4.5.6A.2
Definition of system information messages ........................................................................................ 297
4.5.6A.3
Procedure ............................................................................................................................................ 297
4.5.6A.4
Specific message contents ................................................................................................................... 297
4.5.7
Out of Coverage (State 5) ......................................................................................................................... 298
4.5.7.1
Initial conditions ................................................................................................................................. 298
4.5.7.2
Definition of system information messages ........................................................................................ 298
4.5.7.3
Procedure ............................................................................................................................................ 298
4.5.8
Out of Coverage, V2X setup (State 5-V2X) ............................................................................................. 298
4.5.8.1
Initial conditions ................................................................................................................................. 298
4.5.8.2
Definition of system information messages ........................................................................................ 298
4.5.8.3
Procedure ............................................................................................................................................ 298
4.5.9
Out of Coverage, Test Loopback Activation, V2X setup (State 5A-V2X) ............................................... 298
4.5.9.1
Initial conditions ................................................................................................................................. 298
4.5.9.2
Definition of system information messages ........................................................................................ 299
4.5.9.3
Procedure ............................................................................................................................................ 299
4.5.9.4
Specific message contents ................................................................................................................... 299
4.5A
Other generic procedures................................................................................................................................ 300
4.5A.1
Procedure for IP address allocation in the U-plane ................................................................................... 300
4.5A.2
Tracking area updating procedure............................................................................................................. 300
4.5A.3
Procedure for IMS signalling .................................................................................................................... 301
4.5A.3A
Procedure for IMS Signalling over UTRA ............................................................................................... 302
4.5A.3A.1
Initial conditions ................................................................................................................................. 302
4.5A.3A.2
Procedure ............................................................................................................................................ 303
4.5A.3A.3
Specific message contents ................................................................................................................... 304
4.5A.3B
Procedure for preventing IMS Signalling over GERAN .......................................................................... 306
4.5A.3B.1
Initial conditions ................................................................................................................................. 306
4.5A.3B.2
Procedure ............................................................................................................................................ 307
4.5A.3B.3
Specific message contents ................................................................................................................... 307
4.5A.4
Generic Test Procedure for IMS Emergency call establishment in EUTRA: Normal Service ................. 308
4.5A.4.1
Initial conditions ................................................................................................................................. 308
4.5A.4.2
Definition of system information messages ........................................................................................ 308
4.5A.4.3
Procedure ............................................................................................................................................ 308
4.5A.4.4
Specific message contents ................................................................................................................... 311
4.5A.5
Generic Test Procedure for IMS Emergency call establishment in EUTRA: Limited Service................. 312
4.5A.5.1
Initial conditions ................................................................................................................................. 312
4.5A.5.2
Definition of system information messages ........................................................................................ 312
4.5A.5.3
Procedure ............................................................................................................................................ 313
4.5A.5.4
Specific message contents ................................................................................................................... 316
4.5A.6
Generic Test Procedure for IMS MO speech call establishment in E-UTRA ........................................... 318
4.5A.6.1
Initial conditions ................................................................................................................................. 318
4.5A.6.2
Definition of system information messages ........................................................................................ 318
4.5A.6.3
Procedure ............................................................................................................................................ 319
4.5A.6.4
Specific message contents ................................................................................................................... 320
4.5A.7
Generic Test Procedure for IMS MT Speech call establishment in E-UTRA .......................................... 320
4.5A.7.1
Initial conditions ................................................................................................................................. 320
4.5A.7.2
Definition of system information messages ........................................................................................ 320
4.5A.7.3
Procedure ............................................................................................................................................ 321
4.5A.7.4
Specific message contents ................................................................................................................... 323
4.5A.8
Generic Test Procedure for IMS MO video call establishment in E-UTRA ............................................. 323
4.5A.8.1
Initial conditions ................................................................................................................................. 323
4.5A.8.2
Definition of system information messages ........................................................................................ 323
4.5A.8.3
Procedure ............................................................................................................................................ 324
4.5A.8.4
Specific message contents ................................................................................................................... 325
4.5A.9
Generic Test Procedure for IMS MT video call establishment in E-UTRA ............................................. 325
4.5A.9.1
Initial conditions ................................................................................................................................. 325
4.5A.9.2
Definition of system information messages ........................................................................................ 325
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.9.3
4.5A.9.4
4.5A.10
4.5A.10.1
4.5A.10.2
4.5A.10.3
4.5A.10.4
4.5A.11
4.5A.11.1
4.5A.11.2
4.5A.11.3
4.5A.11.4
4.5A.12
4.5A.12.1
4.5A.12.2
4.5A.12.3
4.5A.12.4
4.5A.14
4.5A.14.1
4.5A.14.2
4.5A.14.3
4.5A.14.4
4.5A.15
4.5A.15.1
4.5A.15.2
4.5A.15.3
4.5A.15.4
4.5A.15A
4.5A.15A.1
4.5A.15A.2
4.5A.15A.3
4.5A.15A.4
4.5A.16
4.5A.16.1
4.5A.16.2
4.5A.16.3
4.5A.16.4
4.5A.17
4.5A.17.1
4.5A.17.2
4.5A.17.3
4.5A.17.4
4.5A.18
4.5A.18.1
4.5A.18.2
4.5A.18.3
4.5A.18.4
4.5A.19
4.5A.19.1
4.5A.19.2
4.5A.19.3
4.5A.19.4
4.5A.20
4.5A.20.1
4.5A.20.2
4.5A.20.3
4.5A.20.4
4.5A.21
4.5A.21.1
4.5A.21.2
4.5A.21.3
10
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure ............................................................................................................................................ 326
Specific message contents ................................................................................................................... 326
Generic Test Procedure for IMS MO speech and aSRVCC in E-UTRA .................................................. 327
Initial conditions ................................................................................................................................. 327
Definition of system information messages ........................................................................................ 327
Procedure ............................................................................................................................................ 328
Specific message contents ................................................................................................................... 329
Generic Test Procedure for IMS MO add video establishment in E-UTRA ............................................. 329
Initial conditions ................................................................................................................................. 329
Definition of system information messages ........................................................................................ 329
Procedure ............................................................................................................................................ 329
Specific message contents ................................................................................................................... 330
Generic Test Procedure for IMS MT add video establishment in E-UTRA ............................................. 330
Initial conditions ................................................................................................................................. 330
Definition of system information messages ........................................................................................ 330
Procedure ............................................................................................................................................ 330
Specific message contents ................................................................................................................... 331
Generic Test Procedure for IMS XCAP establishment in EUTRA .......................................................... 331
Initial conditions ................................................................................................................................. 331
Definition of system information messages ........................................................................................ 331
Procedure ............................................................................................................................................ 332
Specific message contents ................................................................................................................... 332
Generic Test Procedure for EPS Bearer Deactivation .............................................................................. 332
Initial conditions ................................................................................................................................. 332
Definition of system information messages ........................................................................................ 332
Procedure ............................................................................................................................................ 333
Specific message contents ................................................................................................................... 333
Generic Test Procedure for User or Network Initiated EPS Bearer Deactivation..................................... 334
Initial conditions ................................................................................................................................. 334
Definition of system information messages ........................................................................................ 334
Procedure ............................................................................................................................................ 334
Specific message contents ................................................................................................................... 335
Generic Test Procedure to establish additional PDN connectivity ........................................................... 335
Initial conditions ................................................................................................................................. 335
Definition of system information messages ........................................................................................ 335
Procedure ............................................................................................................................................ 336
Specific message contents ................................................................................................................... 336
Generic Test Procedure for user initiated release of additional PDN connectivity ................................... 337
Initial conditions ................................................................................................................................. 337
Definition of system information messages ........................................................................................ 337
Procedure ............................................................................................................................................ 338
Specific message contents ................................................................................................................... 338
Generic Test Procedure for network initiated release of additional PDN connectivity ............................ 339
Initial conditions ................................................................................................................................. 339
Definition of system information messages ........................................................................................ 340
Procedure ............................................................................................................................................ 340
Specific message contents ................................................................................................................... 340
Generic Test Procedure for IMS MO speech call establishment in E-UTRA / EVS ................................ 341
Initial conditions ................................................................................................................................. 341
Definition of system information messages ........................................................................................ 341
Procedure ............................................................................................................................................ 341
Specific message contents ................................................................................................................... 342
Generic Test Procedure for IMS MT speech call establishment in E-UTRA / EVS................................. 342
Initial conditions ................................................................................................................................. 342
Definition of system information messages ........................................................................................ 342
Procedure ............................................................................................................................................ 342
Specific message contents ................................................................................................................... 342
Generic Test Procedure for IMS MO Customized Alerting Tones and speech establishment in EUTRA ....................................................................................................................................................... 343
Initial conditions ................................................................................................................................. 343
Definition of system information messages ........................................................................................ 343
Procedure ............................................................................................................................................ 343
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
11
ETSI TS 136 508 V15.5.0 (2019-07)
4.5A.21.4
Specific message contents ................................................................................................................... 343
4.5A.22
Communication with the ProSe Function: Initial Access ......................................................................... 343
4.5A.22.1
Initial conditions ................................................................................................................................. 343
4.5A.22.2
Definition of system information messages ........................................................................................ 343
4.5A.22.3
Procedure ............................................................................................................................................ 344
4.5A.22.4
Specific message contents ................................................................................................................... 346
4.5A.22A
Communication with the ProSe Function: Subsequent Access ................................................................ 346
4.5A.22A.1
Initial conditions ................................................................................................................................. 346
4.5A.22A.2
Definition of system information messages ........................................................................................ 346
4.5A.22A.3
Procedure ............................................................................................................................................ 346
4.5A.22A.4
Specific message contents ................................................................................................................... 347
4.5A.23
Generic Test Procedure for IMS registration in EPC / WLAN ................................................................. 347
4.5A.23.1
Initial conditions ................................................................................................................................. 347
4.5A.23.2
Definition of system information messages ........................................................................................ 347
4.5A.23.3
Procedure ............................................................................................................................................ 348
4.5A.23.4
Specific message contents ................................................................................................................... 348
4.5A.23A
Generic Test Procedure for IPsec Tunnel Disconnection in EPC / WLAN .............................................. 348
4.5A.23A.1
Initial conditions ................................................................................................................................. 348
4.5A.23A.2
Definition of system information messages ........................................................................................ 348
4.5A.23A.3
Procedure ............................................................................................................................................ 348
4.5A.23A.4
Specific message contents ................................................................................................................... 348
4.5A.24
Generic Test Procedure for IMS emergency call establishment in EPC / WLAN .................................... 349
4.5A.24.1
Initial conditions ................................................................................................................................. 349
4.5A.24.2
Definition of system information messages ........................................................................................ 349
4.5A.24.3
Procedure ............................................................................................................................................ 349
4.5A.24.4
Specific message contents ................................................................................................................... 349
4.5A.25
Generic Test Procedure for XCAP establishment in EPC / WLAN ......................................................... 349
4.5A.25.1
Initial conditions ................................................................................................................................. 349
4.5A.25.2
Definition of system information messages ........................................................................................ 349
4.5A.25.3
Procedure ............................................................................................................................................ 350
4.5A.25.4
Specific message contents ................................................................................................................... 350
4.5A.26
Generic Test Procedure for eCall over IMS establishment in EUTRA: Normal Service ......................... 350
4.5A.26.1
Initial conditions ................................................................................................................................. 350
4.5A.26.2
Definition of system information messages ........................................................................................ 350
4.5A.26.3
Procedure ............................................................................................................................................ 350
4.5A.26.4
Specific message contents ................................................................................................................... 352
4.5A.27
Generic Test Procedure for eCall over IMS establishment in EUTRA: eCall Only Support.................... 353
4.5A.27.1
Initial conditions ................................................................................................................................. 353
4.5A.27.2
Definition of system information messages ........................................................................................ 353
4.5A.27.3
Procedure ............................................................................................................................................ 353
4.5A.27.4
Specific message contents ................................................................................................................... 355
4.5A.28
Generic Test Procedure for Converged IP Communications establishment in EUTRA ........................... 356
4.5A.29
Generic Test Procedure for Converged IP Communications establishment in EPC / WLAN .................. 357
4.6
Default RRC message and information elements contents ............................................................................. 358
4.6.1
Contents of RRC messages ....................................................................................................................... 358
–
CounterCheck...................................................................................................................................... 358
–
CounterCheckResponse....................................................................................................................... 359
–
CSFBParametersRequestCDMA2000 ................................................................................................. 359
–
CSFBParametersResponseCDMA2000 .............................................................................................. 359
–
DLInformationTransfer ....................................................................................................................... 360
–
HandoverFromEUTRAPreparationRequest ....................................................................................... 360
LoggedMeasurementConfiguration .................................................................................................... 361
MasterInformationBlock-SL ................................................................................................................ 362
MasterInformationBlock-SL-V2X........................................................................................................ 363
–
MBMSCountingRequest ...................................................................................................................... 363
–
MBMSCountingResponse .................................................................................................................... 364
–
MBMSInterestIndication ..................................................................................................................... 364
–
MBSFNAreaConfiguration ................................................................................................................. 365
–
MeasurementReport ............................................................................................................................ 365
–
MobilityFromEUTRACommand.......................................................................................................... 366
–
Paging ................................................................................................................................................. 366
–
RRCConnectionReconfiguration ......................................................................................................... 367
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4.6.2
4.6.3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
-
12
ETSI TS 136 508 V15.5.0 (2019-07)
RRCConnectionReconfiguration (SideLink) ....................................................................................... 373
RRCConnectionReconfiguration (V2X) .............................................................................................. 380
RRCConnectionReconfigurationComplete .......................................................................................... 381
RRCConnectionReestablishment ......................................................................................................... 382
RRCConnectionReestablishmentComplete ......................................................................................... 382
RRCConnectionReestablishmentReject ............................................................................................... 382
RRCConnectionReestablishmentRequest ............................................................................................ 383
RRCConnectionReject ......................................................................................................................... 383
RRCConnectionRelease ...................................................................................................................... 384
RRCConnectionRequest ...................................................................................................................... 384
RRCConnectionResume ...................................................................................................................... 385
RRCConnectionResumeComplete ....................................................................................................... 385
RRCConnectionResumeRequest .......................................................................................................... 386
RRCConnectionSetup .......................................................................................................................... 386
RRCConnectionSetupComplete ........................................................................................................... 387
SCGFailureInformationNR ................................................................................................................. 388
SCPTMConfiguration ......................................................................................................................... 390
SCPTMConfiguration-BR ................................................................................................................... 391
SecurityModeCommand ...................................................................................................................... 392
SecurityModeComplete ....................................................................................................................... 392
SecurityModeFailure........................................................................................................................... 392
SidelinkUEInformation ....................................................................................................................... 393
SidelinkUEInformation (V2X)............................................................................................................ 394
UECapabilityEnquiry.......................................................................................................................... 395
UECapabilityInformation ................................................................................................................... 396
UEInformationRequest........................................................................................................................ 403
UEInformationResponse ..................................................................................................................... 404
ULHandoverPreparationTransfer ...................................................................................................... 404
ULInformationTransfer ....................................................................................................................... 405
UEAssistanceInformation ................................................................................................................... 405
ULInformationTransferMRDC............................................................................................................ 406
System information blocks ....................................................................................................................... 406
Radio resource control information elements ........................................................................................... 406
BCCH-Config-DEFAULT .................................................................................................................. 406
CellSelectionInfoCE-r13-DEFAULT ................................................................................................. 407
CQI-ReportAperiodic-r10-DEFAULT ................................................................................................ 407
CQI-ReportConfig-DEFAULT ........................................................................................................... 408
CQI-ReportConfig-r10-DEFAULT .................................................................................................... 408
CQI-ReportConfig-v1130-eIMTA ...................................................................................................... 413
CQI-ReportConfig-v1250-DEFAULT ................................................................................................ 415
CQI-ReportConfigSCell-r10-DEFAULT ............................................................................................ 416
CQI-ReportPeriodic-r10-DEFAULT .................................................................................................. 416
CSI-RS-ConfigNZP-r11-DEFAULT .................................................................................................. 417
CSI-RS-ConfigZP-r11-DEFAULT ..................................................................................................... 417
DMRS-Config-r11-DEFAULT ........................................................................................................... 418
DRB-ToAddModList-RECONFIG ..................................................................................................... 418
EPDCCH-Config-r11-DEFAULT ...................................................................................................... 418
EPDCCH-Config-r11-eIMTA............................................................................................................. 421
FreqHoppingParameters-r13-DEFAULT ............................................................................................ 423
PCCH-Config-DEFAULT .................................................................................................................. 424
PCCH-Config-v1310-DEFAULT ....................................................................................................... 424
PHICH-Config-DEFAULT ................................................................................................................. 424
PDSCH-ConfigCommon-DEFAULT ................................................................................................. 425
PDSCH-ConfigCommon-v1310-DEFAULT ...................................................................................... 425
PDSCH-ConfigDedicated-DEFAULT ................................................................................................ 425
PDSCH-ConfigDedicated-v1130-DEFAULT ..................................................................................... 426
PhysicalConfigDedicatedSCell-r10-DEFAULT ................................................................................. 427
PhysicalConfigDedicatedSCell-r10-eIMTA ....................................................................................... 430
PRACH-Config-DEFAULT ............................................................................................................... 431
PRACH-Config-v1310-DEFAULT .................................................................................................... 432
PRACH-ConfigSIB-DEFAULT ......................................................................................................... 434
PRACH-ConfigSIB-v1310-DEFAULT .............................................................................................. 435
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
13
ETSI TS 136 508 V15.5.0 (2019-07)
PUCCH-ConfigCommon-DEFAULT ................................................................................................. 440
PUCCH-ConfigCommon-v1310-DEFAULT ..................................................................................... 440
PUCCH-ConfigDedicated-DEFAULT ............................................................................................... 441
PUCCH-ConfigDedicated-v1020-DEFAULT .................................................................................... 442
PUCCH-ConfigDedicated-v1130-DEFAULT .................................................................................... 443
PUCCH-ConfigDedicated-v1250-DEFAULT .................................................................................... 443
PUCCH-ConfigDedicated-r13-DEFAULT ......................................................................................... 444
PUSCH-ConfigCommon-DEFAULT ................................................................................................. 445
PUSCH-ConfigCommon-v1310DEFAULT ....................................................................................... 445
PUSCH-ConfigDedicated-r13DEFAULT........................................................................................... 446
PUSCH-ConfigDedicated-v1130-DEFAULT ..................................................................................... 446
PUSCH-ConfigDedicated-v1250-DEFAULT ..................................................................................... 446
PUSCH-ConfigDedicated--DEFAULT............................................................................................... 447
PUSCH-EnhancementsConfig-r14-DEFAULT .................................................................................. 447
RACH-ConfigCommon-DEFAULT ................................................................................................... 448
Rach-ConfigDedicated-DEFAULT .................................................................................................... 450
RadioResourceConfigCommon-DEFAULT ....................................................................................... 451
RadioResourceConfigCommonSCell-r10-DEFAULT ........................................................................ 454
RadioResourceConfigCommonSIB-DEFAULT ................................................................................. 457
RadioResourceConfigDedicated-SRB1 .............................................................................................. 458
RadioResourceConfigDedicated-SRB2-DRB(n,m) ............................................................................ 459
RadioResourceConfigDedicated-DRB(n,m) ....................................................................................... 460
RadioResourceConfigDedicated-SRB4 .............................................................................................. 460
RadioResourceConfigDedicated-HO-TO-EUTRA(n,m) .................................................................... 461
RadioResourceConfigDedicated-AM-DRB-ADD(bid) ...................................................................... 462
RadioResourceConfigDedicated-UM-DRB-ADD(bid) ...................................................................... 462
RadioResourceConfigDedicated- DRB-REL(bid) .............................................................................. 463
RadioResourceConfigDedicated-HO .................................................................................................. 463
RadioResourceConfigDedicatedSCell-r10-DEFAULT ...................................................................... 463
RadioResourceConfigDedicated-SCell_AddMod ............................................................................... 464
RadioResourceConfigDedicated-V2X ................................................................................................ 464
RadioResourceConfigDedicated-EN-DC-Split ................................................................................... 465
RadioResourceConfigDedicated-EN-DC_Split_DRB_Rel(bid) ......................................................... 466
RadioResourceConfigDedicated-EN-DC-SRB2-DRB ....................................................................... 466
RLC-Config-DRB-AM-RECONFIG .................................................................................................. 467
RLC-Config-DRB-UM-RECONFIG .................................................................................................. 467
RLC-Config-SRB-AM-RECONFIG ................................................................................................... 467
SCellToAddMod-r10-DEFAULT ....................................................................................................... 468
SCellToRelease-r10-DEFAULT ......................................................................................................... 468
SCG-Configuration-r12-DEFAULT ................................................................................................... 469
SchedulingRequest-Config-DEFAULT .............................................................................................. 473
SchedulingRequestConfigSCell-r13-DEFAULT ................................................................................ 473
SL-CommResourcePoolV2X-r14-DEFAULT .................................................................................... 474
SL-CommTxPoolSensingConfig-r14-DEFAULT .............................................................................. 475
SL-InterFreqInfoV2X-r14-DEFAULT ............................................................................................... 476
SL-PSSCH-TxConfig-r14-DEFAULT ................................................................................................ 477
SL-TxPoolToAddMod-r14-DEFAULT .............................................................................................. 477
SL-TxPoolToReleaseListV2X-r14-DEFAULT .................................................................................. 478
SL-V2X-ConfigDedicated-r14-DEFAULT ........................................................................................ 479
SL-V2X-InterFreqUE-Config-r14-DEFAULT ................................................................................... 481
SL-V2X-PreconfigCommPool-r14-DEFAULT .................................................................................. 482
SL-V2X-PreconfigFreqInfo-r14-DEFAULT ...................................................................................... 483
SoundingRS-UL-ConfigCommon-DEFAULT ................................................................................... 484
SoundingRS-UL-ConfigDedicated-DEFAULT .................................................................................. 484
SoundingRS-UL-ConfigDedicatedAperiodic-r10-DEFAULT ........................................................... 485
SRB-ToAddModList-RECONFIG...................................................................................................... 485
SRS-TPC-PDCCH-Config-r14-DEFAULT ........................................................................................ 486
TDD-Config-DEFAULT..................................................................................................................... 486
TPC-PDCCH-Config-DEFAULT ....................................................................................................... 486
TPC-PDCCH-ConfigSCell-r13-DEFAULT ....................................................................................... 487
UplinkPowerControlCommon-DEFAULT ......................................................................................... 487
UplinkPowerControlCommonSCell-r10-DEFAULT.......................................................................... 488
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
14
ETSI TS 136 508 V15.5.0 (2019-07)
–
UplinkPowerControlCommon-v1020-DEFAULT .............................................................................. 488
–
UplinkPowerControlCommonSCell-v1310-DEFAULT ..................................................................... 489
–
UplinkPowerControlDedicated-DEFAULT ........................................................................................ 489
–
UplinkPowerControlDedicated-v1020-DEFAULT ............................................................................ 490
–
UplinkPowerControlDedicated-v1130-DEFAULT ............................................................................ 490
–
UplinkPowerControlDedicated-v1250-DEFAULT ............................................................................ 490
–
UplinkPowerControlDedicatedSCell-r10-DEFAULT ........................................................................ 491
–
UplinkPowerControlDedicatedSCell-v1310-DEFAULT .................................................................... 491
RadioResourceConfigDedicated-DRB-Mod ....................................................................................... 491
RadioResourceConfigDedicated-PCell-PATTERN ............................................................................ 492
OtherConfig-r9 .................................................................................................................................... 492
WLAN-OffloadConfig-r12 ................................................................................................................. 494
–
EIMTA-MainConfig-r12-DEFAULT ................................................................................................. 495
–
EIMTA-MainConfigServCell-r12-DEFAULT ................................................................................... 495
–
LWIP-Configuration-GENERIC ......................................................................................................... 496
–
LWA-Configuration-GENERIC ......................................................................................................... 497
–
LWIP-Configuration-W2-GENERIC.................................................................................................. 498
–
LWA-Configuration-W2-GENERIC .................................................................................................. 499
4.6.4
Security control information elements ...................................................................................................... 499
–
SecurityConfigHO-DEFAULT ........................................................................................................... 499
–
SecurityConfigSMC-DEFAULT ........................................................................................................ 500
4.6.5
Mobility control information elements ..................................................................................................... 501
–
MobilityControlInfo-HO ..................................................................................................................... 501
4.6.6
Measurement information elements .......................................................................................................... 504
MeasConfig-DEFAULT ..................................................................................................................... 504
MeasGapConfig-GP1 .......................................................................................................................... 505
MeasGapConfig-CE ............................................................................................................................ 505
MeasGapConfig-GP2 .......................................................................................................................... 505
MeasDS-Config-DEFAULT ............................................................................................................... 506
MeasCSI-RS-Config-DEFAULT ........................................................................................................ 506
–
MeasObjectCDMA2000-GENERIC ................................................................................................... 507
–
ReportConfigToAddModList_DEFAULT .......................................................................................... 507
–
MeasIdToAddModList_DEFAULT .................................................................................................... 507
MeasObjectEUTRA-GENERIC.......................................................................................................... 508
MeasObjectGERAN-GENERIC ......................................................................................................... 509
MeasObjectNR-GENERIC ................................................................................................................. 509
MeasObjectUTRA-GENERIC ............................................................................................................ 510
–
MeasObjectWLAN-W2-GENERIC .................................................................................................... 510
QuantityConfig-DEFAULT ................................................................................................................ 511
ReportConfigEUTRA-A1 ................................................................................................................... 512
ReportConfigEUTRA-A2 ................................................................................................................... 512
ReportConfigEUTRA-A3 ................................................................................................................... 513
ReportConfigEUTRA-A4 ................................................................................................................... 514
ReportConfigEUTRA-A5 ................................................................................................................... 515
ReportConfigEUTRA-A6 ................................................................................................................... 516
ReportConfigEUTRA-PERIODICAL ................................................................................................ 516
ReportConfigInterRAT-B1-GERAN .................................................................................................. 517
ReportConfig-B1-NR-r15 ................................................................................................................... 517
ReportConfigInterRAT-B1-UTRA ..................................................................................................... 518
ReportConfigInterRAT-B2-CDMA2000 ............................................................................................ 519
ReportConfigInterRAT-B2-GERAN .................................................................................................. 520
ReportConfigInterRAT-B2-UTRA ..................................................................................................... 521
-ReportConfigInterRAT-B2-NR ..................................................................................................................................... 522
ReportConfigInterRAT-PERIODICAL .......................................................................................................................... 522
–
ReportConfigInterRAT-W2-WLAN ................................................................................................... 523
–
ReportConfigInterRAT-W3-WLAN ................................................................................................... 523
ReportConfigEUTRA-C1 ................................................................................................................... 524
ReportConfigEUTRA-C2 ................................................................................................................... 525
ReportConfigEUTRA-PERIODICAL-CSI-RS ................................................................................... 526
ReportConfigEUTRA-V1 ................................................................................................................... 526
ReportConfigEUTRA-V2 ................................................................................................................... 527
4.6.7
Other information elements ...................................................................................................................... 527
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
–
4.6.8
4.7
4.7.1
4.7.2
4.7.3
-
15
ETSI TS 136 508 V15.5.0 (2019-07)
RRC-TransactionIdentifier-DL ........................................................................................................... 527
RRC-TransactionIdentifier-UL ........................................................................................................... 527
Channel-bandwidth-dependent parameters ............................................................................................... 527
Default NAS message and information element contents .............................................................................. 528
Security protected NAS messages ............................................................................................................ 528
Contents of EMM messages ..................................................................................................................... 530
ATTACH ACCEPT ............................................................................................................................ 530
ATTACH COMPLETE ...................................................................................................................... 533
ATTACH REJECT ............................................................................................................................. 534
ATTACH REQUEST.......................................................................................................................... 535
AUTHENTICATION FAILURE ........................................................................................................ 537
AUTHENTICATION REJECT .......................................................................................................... 537
AUTHENTICATION REQUEST....................................................................................................... 538
AUTHENTICATION RESPONSE..................................................................................................... 538
CS SERVICE NOTIFICATION ......................................................................................................... 539
CONTROL PLANE SERVICE REQUEST........................................................................................ 539
DETACH ACCEPT (UE originating detach)...................................................................................... 540
DETACH ACCEPT (UE terminated detach) ...................................................................................... 540
DETACH REQUEST (UE originating detach) ................................................................................... 541
DETACH REQUEST (UE terminated detach) ................................................................................... 541
DOWNLINK NAS TRANSPORT...................................................................................................... 542
EMM INFORMATION ...................................................................................................................... 542
EMM STATUS ................................................................................................................................... 542
EXTENDED SERVICE REQUEST ................................................................................................... 543
GUTI REALLOCATION COMMAND ............................................................................................. 543
GUTI REALLOCATION COMPLETE ............................................................................................. 544
IDENTITY REQUEST ....................................................................................................................... 544
IDENTITY RESPONSE ..................................................................................................................... 544
SECURITY MODE COMMAND ...................................................................................................... 545
SECURITY MODE COMPLETE ...................................................................................................... 546
SECURITY MODE REJECT ............................................................................................................. 546
SERVICE ACCEPT ............................................................................................................................ 546
SERVICE REJECT ............................................................................................................................. 547
SERVICE REQUEST ......................................................................................................................... 547
TRACKING AREA UPDATE ACCEPT ........................................................................................... 548
TRACKING AREA UPDATE COMPLETE...................................................................................... 551
TRACKING AREA UPDATE REJECT ............................................................................................ 551
TRACKING AREA UPDATE REQUEST ......................................................................................... 552
UPLINK NAS TRANSPORT ............................................................................................................. 554
Contents of ESM messages ....................................................................................................................... 555
ACTIVATE DEDICATED EPS BEARER CONTEXT ACCEPT ..................................................... 555
ACTIVATE DEDICATED EPS BEARER CONTEXT REJECT ...................................................... 556
ACTIVATE DEDICATED EPS BEARER CONTEXT REQUEST .................................................. 557
ACTIVATE DEFAULT EPS BEARER CONTEXT ACCEPT ......................................................... 559
ACTIVATE DEFAULT EPS BEARER CONTEXT REJECT .......................................................... 559
ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST ....................................................... 561
BEARER RESOURCE ALLOCATION REJECT ............................................................................. 566
BEARER RESOURCE ALLOCATION REQUEST .......................................................................... 566
BEARER RESOURCE MODIFICATION REJECT .......................................................................... 567
BEARER RESOURCE MODIFICATION REQUEST ...................................................................... 568
DEACTIVATE EPS BEARER CONTEXT ACCEPT ....................................................................... 569
DEACTIVATE EPS BEARER CONTEXT REQUEST..................................................................... 569
ESM DATA TRANSPORT ................................................................................................................ 570
ESM DUMMY MESSAGE ................................................................................................................ 570
ESM INFORMATION REQUEST ..................................................................................................... 571
ESM INFORMATION RESPONSE ................................................................................................... 571
ESM STATUS .................................................................................................................................... 572
MODIFY EPS BEARER CONTEXT ACCEPT ................................................................................. 572
MODIFY EPS BEARER CONTEXT REJECT .................................................................................. 573
MODIFY EPS BEARER CONTEXT REQUEST .............................................................................. 574
NOTIFICATION ................................................................................................................................ 575
PDN CONNECTIVITY REJECT ....................................................................................................... 575
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.7A
4.7B
4.7B.1
–
–
–
–
–
–
–
–
–
–
–
4.7B.2
4.7C
4.7C.1
4.7C.2
4.7D
4.7D.1
–
4.7E
4.7F
4.7F.1
4.7F.2
4.7F.3
-
16
ETSI TS 136 508 V15.5.0 (2019-07)
PDN CONNECTIVITY REQUEST ................................................................................................... 576
PDN DISCONNECT REJECT ........................................................................................................... 577
PDN DISCONNECT REQUEST........................................................................................................ 577
Default TC message and information element contents ................................................................................. 578
ACTIVATE TEST MODE ................................................................................................................. 578
ACTIVATE TEST MODE COMPLETE............................................................................................ 578
CLOSE UE TEST LOOP .................................................................................................................... 579
CLOSE UE TEST LOOP COMPLETE .............................................................................................. 582
DEACTIVATE TEST MODE ............................................................................................................ 582
DEACTIVATE TEST MODE COMPLETE ...................................................................................... 582
OPEN UE TEST LOOP ...................................................................................................................... 583
OPEN UE TEST LOOP COMPLETE ................................................................................................ 583
UE TEST LOOP MODE C MBMS PACKET COUNTER REQUEST ............................................. 583
UE TEST LOOP MODE C MBMS PACKET COUNTER RESPONSE ........................................... 583
UE TEST LOOP PROSE PACKET COUNTER REQUEST ............................................................. 584
UE TEST LOOP PROSE PACKET COUNTER RESPONSE ........................................................... 584
UE TEST LOOP MODE F SCPTM PACKET COUNTER REQUEST ............................................ 584
UE TEST LOOP MODE F SCPTM PACKET COUNTER RESPONSE .......................................... 585
Default UTRA message and information element contents ........................................................................... 586
UTRA RRC messages .............................................................................................................................. 586
HANDOVER TO UTRAN COMMAND ........................................................................................... 586
HANDOVER FROM UTRAN COMMAND ..................................................................................... 598
MEASUREMENT CONTROL........................................................................................................... 598
MEASUREMENT REPORT .............................................................................................................. 600
PHYSICAL CHANNEL RECONFIGURATION .............................................................................. 601
PHYSICAL CHANNEL RECONFIGURATION COMPLETE ........................................................ 603
RRC CONNECTION REQUEST ....................................................................................................... 603
SECURITY MODE COMMAND ...................................................................................................... 604
SECURITY MODE COMPLETE ...................................................................................................... 604
UTRAN MOBILITY INFORMATION .............................................................................................. 604
UTRAN MOBILITY INFORMATION CONFIRM........................................................................... 604
UTRA NAS messages .............................................................................................................................. 604
Default DS-MIPv6 message and information element contents ..................................................................... 614
IKEv2 messages........................................................................................................................................ 614
IKEv2 IKE_SA_INIT Request............................................................................................................ 614
IKE_SA_INIT Response ..................................................................................................................... 617
IKE_AUTH_Request .......................................................................................................................... 618
IKE_AUTH Response ......................................................................................................................... 621
Messages used to perform DS-MIPv6 registration and deregistration...................................................... 625
Router Advertisement ......................................................................................................................... 625
Binding Update ................................................................................................................................... 626
Binding Acknowledgement ................................................................................................................. 627
Binding Revocation Indication............................................................................................................ 628
Binding Revocation Acknowledgement .............................................................................................. 629
Default GERAN message and information element contents ........................................................................ 630
GPRS message .......................................................................................................................................... 630
PS HANDOVER COMMAND ........................................................................................................... 630
Default HTTP messages for communication with the ProSe Function .......................................................... 631
HTTP Request ..................................................................................................................................... 631
HTTP Response .................................................................................................................................. 631
Default ProSe messages ................................................................................................................................. 632
ProSe discovery messages ........................................................................................................................ 632
DISCOVERY_REQUEST .................................................................................................................. 632
DISCOVERY_RESPONSE ................................................................................................................ 633
MATCH_REPORT ............................................................................................................................. 637
MATCH_REPORT_ACK................................................................................................................... 638
PC5_DISCOVERY ............................................................................................................................. 639
Messages transmitted over the PC3ch interface........................................................................................ 643
USAGE_INFORMATION_REPORT_LIST ...................................................................................... 643
USAGE_INFORMATION_REPORT_LIST_RESPONSE ................................................................ 645
ProSe Direct Communication Messages ................................................................................................... 646
DIRECT_COMMUNICATION_ACCEPT ........................................................................................ 646
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.7G
4.7H
4.7I
4.8
4.8.1
4.8.2
4.8.2.1
4.8.2.1.1
4.8.2.1.2
4.8.2.1.3
4.8.2.1.4
4.8.2.1.5
4.8.2.1.6
4.8.2.1.7
4.8.2.2
4.8.2.2.1
4.8.3
4.8.4
4.9
4.9.1
4.9.1.1
4.9.1.2
4.9.1.2.1
4.9.1.2.2
4.9.1.2.3
4.9.2
4.9.3
4.9.3.1
4.9.3.2
4.9.3.3
4.9.3.4
4.9.3.5
4.10
17
ETSI TS 136 508 V15.5.0 (2019-07)
DIRECT_COMMUNICATION_KEEPALIVE .................................................................................. 646
DIRECT_COMMUNICATION_KEEPALIVE_ACK ....................................................................... 647
DIRECT_COMMUNICATION_RELEASE ...................................................................................... 647
DIRECT_COMMUNICATION_RELEASE_ACCEPT ..................................................................... 647
DIRECT_COMMUNICATION_REQUEST ...................................................................................... 648
DIRECT_SECURITY_MODE_COMMAND .................................................................................... 649
DIRECT_SECURITY_MODE_COMPLETE .................................................................................... 650
KEY_REQUEST ................................................................................................................................ 650
KEY_RESPONSE .............................................................................................................................. 651
MIKEY Key Delivery Message .......................................................................................................... 652
MIKEY Verification Message ............................................................................................................ 655
Default IKEv2 message and information element contents............................................................................ 656
IKE_SA_INIT request ........................................................................................................................ 656
IKE_SA_INIT response ...................................................................................................................... 658
IKE_AUTH_request ........................................................................................................................... 658
IKE_AUTH response .......................................................................................................................... 659
Default TLS message and information element contents ............................................................................... 659
ClientHello .......................................................................................................................................... 660
ServerHello ......................................................................................................................................... 660
ServerKeyExchange ............................................................................................................................ 660
ServerHelloDone ................................................................................................................................. 660
ClientKeyExchange............................................................................................................................. 660
ChangeCipherSpec .............................................................................................................................. 661
Finished ............................................................................................................................................... 661
Default AT Command message and information element.............................................................................. 661
AT Command +CATM ....................................................................................................................... 661
AT Command +CCUTLE ................................................................................................................... 662
AT Command +CUTCR ..................................................................................................................... 662
AT Command +CUSPCREQ .............................................................................................................. 662
Reference radio bearer configurations ............................................................................................................ 663
General...................................................................................................................................................... 663
SRB and DRB parameters and combinations ........................................................................................... 663
SRB and DRB parameters ................................................................................................................... 663
SRB configurations ....................................................................................................................... 663
DRB PDCP configurations ............................................................................................................ 664
DRB RLC configurations .............................................................................................................. 665
DRB Logical Channel configurations ........................................................................................... 666
MAC configurations ...................................................................................................................... 667
Physical Layer configurations ....................................................................................................... 670
DRB configurations ....................................................................................................................... 680
SRB and DRB combinations ............................................................................................................... 680
Combinations on DL-SCH and UL-SCH ...................................................................................... 680
UTRA reference radio parameters and combinations ............................................................................... 680
GERAN reference PDP context parameters ............................................................................................. 681
Common test USIM, CSIM and ISIM parameters ......................................................................................... 681
General...................................................................................................................................................... 681
Definitions ........................................................................................................................................... 681
Definition of the test algorithm for authentication .............................................................................. 681
Authentication and key derivation in the test USIM, CSIM and ISIM and SS ............................. 681
Generation of re-synchronization parameters in the USIM, CSIM and ISIM ............................... 682
Using the authentication test algorithm for UE conformance testing ............................................ 682
Default parameters for the test USIM, CSIM and ISIM ........................................................................... 682
Default settings for the Elementary Files (EFs) ........................................................................................ 682
Modified contents of the USIM Elementary Files and additional USIM Elements files at the DF
ProSe level .......................................................................................................................................... 682
Modified contents of the CSIM Elementary Files ............................................................................... 689
Modified contents of the USIM Elementary Files and additional USIM Elements files at the
MCPTT level....................................................................................................................................... 700
Modified contents of the USIM Elementary Files and additional USIM Elements files at the
DFV2X level .......................................................................................................................................... 701
Modified contents of the Elementary Files for eCall over IMS .......................................................... 702
V2X reference configuration .......................................................................................................................... 702
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
18
ETSI TS 136 508 V15.5.0 (2019-07)
4.10.1
Reference configuration for V2X Sidelink Communication..................................................................... 702
4.10.1.1
V2X Sidelink Communication Preconfiguration for out-of-network coverage operation .................. 702
4.10.2
V2X management data object configuration ............................................................................................ 703
4.11
GNSS Requirements for V2X and MCS testing............................................................................................. 706
4.11.1
General...................................................................................................................................................... 706
4.11.2
GNSS Scenarios........................................................................................................................................ 706
5
Test environment for RF test ................................................................................................................711
5.1
Requirements of test equipment ..................................................................................................................... 711
5.2
RF Reference system configurations .............................................................................................................. 711
5.2.1
Common parameters for simulated E-UTRA cells ................................................................................... 711
5.2.1.1
Combinations of system information blocks ....................................................................................... 711
5.2.1.2
Scheduling of system information blocks ........................................................................................... 712
5.2.1.3
Common contents of system information messages ........................................................................... 712
5.2A
Generic RF procedures ................................................................................................................................... 713
5.2A.1
UE RF test states ....................................................................................................................................... 714
5.2A.1A
Registered, Idle Mode, UE Test Mode Activated (State 2A-RF) ............................................................. 715
5.2A.1A.1
Initial conditions ................................................................................................................................. 715
5.2A.1A.2
Definition of system information messages ........................................................................................ 715
5.2A.1A.3
Procedure ............................................................................................................................................ 716
5.2A.1A.4
Specific message contents ................................................................................................................... 717
5.2A.1AA
Registered, Idle Mode, UE Test Mode Activated in cell supporting BL/CE UE (State 2A-RF-CE) ........ 719
5.2A.1AA.1
Initial conditions ................................................................................................................................. 719
5.2A.1AA.2
Definition of system information messages ........................................................................................ 719
5.2A.1AA.3
Procedure ............................................................................................................................................ 719
5.2A.1AA.4
Specific message contents ................................................................................................................... 720
5.2A.2
Generic Default Radio Bearer Establishment, UE Test Mode Activated (State 3A-RF) .......................... 720
5.2A.2.1
Initial conditions ................................................................................................................................. 720
5.2A.2.2
Definition of system information messages ........................................................................................ 720
5.2A.2.3
Procedure ............................................................................................................................................ 720
5.2A.2.4
Specific message contents ................................................................................................................... 721
5.2A.2A
DC MCG/SCG Dedicated RB established, UE Test Mode Activate (State 3A-RF-DC1)........................ 721
5.2A.2A.1
Initial conditions ................................................................................................................................. 721
5.2A.2A.2
Definition of system information messages ........................................................................................ 721
5.2A.2A.3
Procedure ............................................................................................................................................ 721
5.2A.2A.4
Specific message contents ................................................................................................................... 721
5.2A.2AA
Generic Default Radio Bearer Establishment, UE Test Mode Activated in cell supporting BL/CE UE
(State 3A-RF-CE) ..................................................................................................................................... 722
5.2A.2AA.1
Initial conditions ................................................................................................................................. 722
5.2A.2AA.2
Definition of system information messages ........................................................................................ 722
5.2A.2AA.3
Procedure ............................................................................................................................................ 723
5.2A.2AA.4
Specific message contents ................................................................................................................... 723
5.2A.2B
DC Split Default RB established, UE Test Mode Activate (State 3A-RF-DC2) ...................................... 724
5.2A.2B.1
Initial conditions ................................................................................................................................. 724
5.2A.2B.2
Definition of system information messages ........................................................................................ 724
5.2A.2B.3
Procedure ............................................................................................................................................ 724
5.2A.2B.4
Specific message contents ................................................................................................................... 725
5.2A.2C
Generic Default Radio Bearer Establishment, UE Test Mode Activated, V2X Setup (State 3A-RFV2X) ......................................................................................................................................................... 725
5.2A.2C.1
Initial conditions ................................................................................................................................. 725
5.2A.2C.2
Definition of system information messages ........................................................................................ 725
5.2A.2C.3
Procedure ............................................................................................................................................ 725
5.2A.2C.4
Specific message contents ................................................................................................................... 725
5.2A.3
Loopback Activation without looped data (State 4A-RF) ........................................................................ 725
5.2A.3.1
Initial conditions ................................................................................................................................. 725
5.2A.3.2
Definition of system information messages ........................................................................................ 726
5.2A.3.3
Procedure ............................................................................................................................................ 726
5.2A.3.4
Specific message contents ................................................................................................................... 726
5.2A.3A
DC MCG/SCG DRBs Loopback Activation without looped data (State 4A-RF-DC1)............................ 726
5.2A.3A.1
Initial conditions ................................................................................................................................. 726
5.2A.3A.2
Definition of system information messages ........................................................................................ 727
5.2A.3A.3
Procedure ............................................................................................................................................ 727
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
19
ETSI TS 136 508 V15.5.0 (2019-07)
5.2A.3A.4
5.2A.3AA
5.2A.3AA.1
5.2A.3AA.2
5.2A.3AA.3
5.2A.3AA.4
5.2A.3B
5.2A.3B.1
5.2A.3B.2
5.2A.3B.3
5.2A.3B.4
5.2A.3C
5.2A.3C.1
5.2A.3C.2
5.2A.3C.3
5.2A.3C.4
5.2A.4
5.2 A.41.
5.2A.4.1.1
5.2A.4.1.2
5.2A.5
5.2A.5.1
5.2A.5.1.1
5.2A.6
5.2A.6.1
5.2A.6.1.1
5.2A.6.1.1
5.2A.6.2
5.2A.6.2.1
Specific message contents ................................................................................................................... 727
Loopback Activation without looped data in cell supporting BL/CE UE (State 4A-RF-CE) ................... 727
Initial conditions ................................................................................................................................. 727
Definition of system information messages ........................................................................................ 727
Procedure ............................................................................................................................................ 728
Specific message contents ................................................................................................................... 728
DC Split DRB Loopback Activation without looped data (State 4A-RF-DC2) ....................................... 728
Initial conditions ................................................................................................................................. 728
Definition of system information messages ........................................................................................ 728
Procedure ............................................................................................................................................ 728
Specific message contents ................................................................................................................... 728
Loopback Activation without looped data, V2X Setup (State 4A-RF-V2X) ............................................ 728
Initial conditions ................................................................................................................................. 728
Definition of system information messages ........................................................................................ 729
Procedure ............................................................................................................................................ 729
Specific message contents ................................................................................................................... 729
Procedure to configure SCC ..................................................................................................................... 729
Specific message contents ................................................................................................................... 729
Exceptions for all CA tests ............................................................................................................ 729
Exceptions for UL CA tests ........................................................................................................... 730
Exceptions for feICIC tests ....................................................................................................................... 731
Specific message contents ................................................................................................................... 731
Neighbour cell info for all feICIC test cases ................................................................................. 731
Exceptions for NAICS tests ...................................................................................................................... 732
NAICS specific RRC Connection reconfiguration procedure ............................................................. 732
Procedure ....................................................................................................................................... 732
Specific message contents ............................................................................................................. 732
Specific message contents ................................................................................................................... 732
RRCConnectionReconfiguration for setting up and releasing NAICS configuration in NAICS
test cases ........................................................................................................................................ 733
5.2A.7
Procedure to retrieve additional UE Capabilities for Rel-11 and higher UEs that support
frequencyBandRetrieval_r11 .................................................................................................................... 734
5.2A.7.1
Initial conditions ................................................................................................................................. 734
5.2A.7.2
Definition of system information messages ........................................................................................ 735
5.2A.7.3
Procedure ............................................................................................................................................ 735
5.2A.7.4
Specific message contents ................................................................................................................... 735
5.2A.8
Exceptions for DL Control channel interference mitigation (Type A and Type B) tests .......................... 736
5.2A.8.1
Specific message contents ................................................................................................................... 736
5.2A.8.1.1
Neighbour cell info for all CCIM test cases .................................................................................. 736
5.3
Default RRC message and information elements contents ............................................................................. 736
5.3.1
Radio resource control information elements ........................................................................................... 736
5.3.2
Measurement information elements .......................................................................................................... 738
5.4
Default NAS message and information elements contents ............................................................................. 738
5.5
Reference radio bearer configurations ............................................................................................................ 738
5.5.1
SRB and DRB parameters ........................................................................................................................ 738
5.5.1.1
MAC configurations............................................................................................................................ 738
5.5.1.2
Physical Layer configurations ............................................................................................................. 740
5.5.1.3
SRB and DRB combinations ............................................................................................................... 741
5.5.1.3.1
Combinations on DL-SCH and UL-SCH ...................................................................................... 741
6
6.1
6.2
6.2.1
6.2.1.1
6.2.1.2
6.2.1.3
6.2.1.4
6.2.1.5
6.2.2
6.2.2.1
6.2.2.2
Test environment for Signalling test ....................................................................................................742
Requirements of test equipment ..................................................................................................................... 742
Reference test conditions ................................................................................................................................ 742
Physical channel allocations ..................................................................................................................... 742
Antennas ............................................................................................................................................. 742
Downlink physical channels and physical signals............................................................................... 742
Mapping of downlink physical channels and signals to physical resources ........................................ 743
Uplink physical channels and physical signals ................................................................................... 743
Mapping of uplink physical channels and signals to physical resources ............................................. 743
Signal levels .............................................................................................................................................. 743
Downlink signal levels ........................................................................................................................ 743
Measurement accuracy and side conditions ........................................................................................ 744
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
20
ETSI TS 136 508 V15.5.0 (2019-07)
6.2.2.3
Uplink signal levels ............................................................................................................................. 745
6.2.3
Default test frequencies ............................................................................................................................ 746
6.2.3.1
Test frequencies for signalling test...................................................................................................... 746
6.2.3.2
Test frequencies for CA signalling test ............................................................................................... 749
6.2.3.3
Test frequencies for ProSe signalling test ........................................................................................... 760
6.2.3.4
Test frequencies for MFBI frequency band priority adjustment signalling test .................................. 761
6.2.3.5
Test frequencies for V2X Communication ......................................................................................... 761
6.3
Reference system configurations .................................................................................................................... 761
6.3.1
Default parameter specific for simulated cells .......................................................................................... 762
6.3.1.1
Intra-frequency neighbouring cell list in SIB4 for E-UTRA cells ...................................................... 762
6.3.1.2
Inter-frequency carrier frequency list in SIB5 for E-UTRA cells ....................................................... 762
6.3.1.3
UTRA carrier frequency list in SIB6 for E-UTRA cells ..................................................................... 763
6.3.1.4
GERAN carrier frequency group list in SIB7 for E-UTRA cells ........................................................ 763
6.3.1.5
CDMA2000 HRPD carrier frequency list in SIB8 for E-UTRA cells ................................................ 764
6.3.1.6
CDMA2000 1xRTT carrier frequency list in SIB8 for E-UTRA cells ............................................... 764
6.3.1.7
E-UTRA carrier frequency list in SIB19 for UTRA cells ................................................................... 764
6.3.1.8
NR carrier frequency list in SIB24 for E-UTRA cells ........................................................................ 765
6.3.2
Default configurations for NAS test cases ................................................................................................ 765
6.3.2.1
Simulated network scenarios for NAS test cases ................................................................................ 765
6.3.2.2
Simulated NAS cells ........................................................................................................................... 765
6.3.2.3
Broadcast system information ............................................................................................................. 767
6.3.2.3.1
Intra-frequency neighbouring cell list in SIB4 for E-UTRA NAS cells ........................................ 767
6.3.2.3.2
Inter-frequency carrier frequency list in SIB5 for E-UTRA NAS cells......................................... 767
6.3.3
Cell configurations .................................................................................................................................... 768
6.3.3.1
Full cell configuration ......................................................................................................................... 768
6.3.3.2
Minimum uplink cell configuration .................................................................................................... 768
6.3.3.3
Broadcast only cell configuration ....................................................................................................... 769
6.3.3.3A
Virtual cell configuration .................................................................................................................... 769
6.3.3.4
Application of different cell configurations ........................................................................................ 769
6.3.4
SCell configurations ................................................................................................................................. 769
6.4
Generic procedures ......................................................................................................................................... 770
6.4.1
Initial UE states and setup procedures ...................................................................................................... 770
6.4.1.1
Initial UE states and setup procedures ................................................................................................ 770
6.4.1.2
Dedicated Bearer Establishment (to state 5) ....................................................................................... 771
6.4.1.2.1
Initial conditions ............................................................................................................................ 771
6.4.1.2.2
Definition of system information messages................................................................................... 772
6.4.1.2.3
Procedure ....................................................................................................................................... 772
6.4.1.2.4
Specific message contents ............................................................................................................. 772
6.4.1.2A
DC MCG/SCG Dedicated Bearer Establishment (to state 5A) ........................................................... 772
6.4.1.2A.1
Initial conditions ............................................................................................................................ 772
6.4.1.2A.2
Definition of system information messages................................................................................... 772
6.4.1.2A.3
Procedure ....................................................................................................................................... 772
6.4.1.2A.4
Specific message contents ............................................................................................................. 773
6.4.1.2B
DC Split Dedicated Bearer Establishment (to state 5B) ...................................................................... 773
6.4.1.2B.1
Initial conditions ............................................................................................................................ 773
6.4.1.2B.2
Definition of system information messages................................................................................... 773
6.4.1.2B.3
Procedure ....................................................................................................................................... 773
6.4.1.2B.4
Specific message contents ............................................................................................................. 774
6.4.1.3
Loopback Activation (to state 6) ......................................................................................................... 774
6.4.1.3.1
Initial conditions ............................................................................................................................ 774
6.4.1.3.2
Definition of system information messages................................................................................... 774
6.4.1.3.3
Procedure ....................................................................................................................................... 775
6.4.1.3.4
Specific message contents ............................................................................................................. 775
6.4.1.3A
DC MCG/SCG DRB Loopback Activation (to state 6A).................................................................... 775
6.4.1.3A.1
Initial conditions ............................................................................................................................ 775
6.4.1.3A.2
Definition of system information messages................................................................................... 775
6.4.1.3A.3
Procedure ....................................................................................................................................... 775
6.4.1.3A.4
Specific message contents ............................................................................................................. 775
6.4.1.3B
DC Split DRB Loopback Activation (to state 6B) .............................................................................. 775
6.4.1.3B.1
Initial conditions ............................................................................................................................ 775
6.4.1.3B.2
Definition of system information messages................................................................................... 776
6.4.1.3B.3
Procedure ....................................................................................................................................... 776
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
21
6.4.1.3B.4
6.4.2
6.4.2.1
6.4.2.2
6.4.2.3
6.4.2.4
6.4.2.5
6.4.2.6
6.4.2.7
6.4.2.7A
6.4.2.7B
6.4.2.8
6.4.2.9
6.4.2.10
ETSI TS 136 508 V15.5.0 (2019-07)
Specific message contents ............................................................................................................. 776
Test procedures ......................................................................................................................................... 776
Introduction ......................................................................................................................................... 776
Test procedure to check RRC_IDLE state .......................................................................................... 776
Test procedure to check RRC_CONNECTED state ........................................................................... 777
Test procedure Paging (for NAS testing) ............................................................................................ 777
Test procedure for no response to paging (for NAS testing) ............................................................... 777
Test procedure to check that a dedicated EPS bearer context is active (for NAS testing) .................. 778
Test procedure to check that UE is camped on a new E-UTRAN cell ................................................ 778
Test procedure to check that UE is camped on E-UTRAN cell upon mobility from another RAT .... 779
Test procedure to check that UE is camped on a new E-UTRAN cell / UP CIoT .............................. 783
Test procedure to check that UE is camped on a new UTRAN cell.................................................... 783
Test procedure to check that UE is camped on a new GERAN cell.................................................... 784
Test procedure to check that UE performs tracking area updating procedure without ISR and
security reconfiguration after successful completion of handover from UTRA ................................. 785
6.4.3
Reference test procedures for TTCN development ................................................................................... 787
6.4.3.1
UE triggered establishment of a dedicated EPS bearer context .......................................................... 788
6.4.3.2
UE triggered establishment of a default EPS bearer context associated with an additional PDN ....... 789
6.4.3.3
UE triggered modification of an EPS bearer context .......................................................................... 791
6.4.3.4
UE triggered deletion of an EPS bearer context .................................................................................. 792
6.4.3.5
UE triggered CS call ........................................................................................................................... 793
6.4.3.6
UE triggered MO SMS over SGs ........................................................................................................ 794
6.4.3.7
CS fallback to UTRAN procedures (LAI of UTRAN cell same as the LAI received in combined
Attach procedure in EUTRA cell) ....................................................................................................... 794
6.4.3.7.1
CS fallback to UTRAN with redirection / MT call (PS bearers not established) .......................... 795
6.4.3.7.2
CS fallback to UTRAN with redirection / MO call (PS bearers not established) .......................... 796
6.4.3.7.3
CS fallback to UTRAN with redirection / MT call (PS bearer established) .................................. 797
6.4.3.7.4
CS fallback to UTRAN with redirection / MO call (PS bearer established) ................................. 797
6.4.3.7.5
CS fallback to UTRAN with Handover / MT call ......................................................................... 798
6.4.3.7.5.1
Specific message contents........................................................................................................ 799
6.4.3.7.6
CS fallback to UTRAN with Handover / MO call......................................................................... 800
6.4.3.7.6.1
Specific message contents........................................................................................................ 801
6.4.3.7.7
CS fallback to UTRAN with Handover / emergency call.............................................................. 802
6.4.3.7.7.1
Specific message contents........................................................................................................ 803
6.4.3.8
CS fallback to GERAN procedures (LAI of GERAN cell same as the LAI received in combined
Attach procedure in EUTRA cell) ....................................................................................................... 803
6.4.3.8.1
CS fallback to GERAN with redirection or CCO / MT call (DTM not supported) ....................... 804
6.4.3.8.2
CS fallback to GERAN with redirection or CCO / MO call (DTM not supported) ...................... 805
6.4.3.8.3
CS fallback to GERAN with PS Handover / MT call (EDTM not supported) .............................. 805
6.4.3.8.4
CS fallback to GERAN with PS Handover / MO call (EDTM not supported).............................. 805
6.4.3.8.5
CS fallback to GERAN with PS Handover / MT call (EDTM supported) .................................... 805
6.4.3.9
SRVCC Handover to UTRA ............................................................................................................... 805
6.4.3.9.1
Specific message contents ............................................................................................................. 806
6.4.3.10
Offload to WLAN ............................................................................................................................... 806
6.4.3.10.1
Specific message contents ............................................................................................................. 807
6.4.3.11
Offload from WLAN........................................................................................................................... 807
6.4.3.11.1
Specific message contents ............................................................................................................. 808
6.4.3.12
Check UE does not offload to WLAN ................................................................................................ 808
6.4.3.12.1
Specific message contents ............................................................................................................. 808
6.4.3.13
Check UE does not Offload to E-UTRAN .......................................................................................... 808
6.4.3.14
Procedure for UE initiated detach at non-switch-off ................................................................................ 809
6.4.3.13.1
Specific message contents ............................................................................................................. 809
6.4.3A
Test case postambles ................................................................................................................................. 809
6.4.3A.1
Introduction ......................................................................................................................................... 809
6.4.3A.2
Reference end states ............................................................................................................................ 809
6.5
Default RRC message and information element contents .............................................................................. 812
6.5.1
Measurement information elements .......................................................................................................... 813
MeasConfig-DEFAULT ..................................................................................................................... 813
MeasGapConfig-GP1 .......................................................................................................................... 813
MeasGapConfig-GP2 .......................................................................................................................... 814
MeasGapConfig-CE ............................................................................................................................ 814
6.6
Default NAS message and information element contents .............................................................................. 814
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
22
ETSI TS 136 508 V15.5.0 (2019-07)
6.6.1
Reference default EPS bearer contexts ..................................................................................................... 814
6.6.2
Reference dedicated EPS bearer contexts ................................................................................................. 815
6.6A
Default SMS over SGs message and information element contents............................................................... 825
6.6A.1
CM-sublayer messages ............................................................................................................................. 825
CP-ACK .............................................................................................................................................. 825
CP-DATA ........................................................................................................................................... 825
6.6A.2
Short Message Relay Layer (SM-RL) messages ...................................................................................... 826
RP-ACK RPDU .................................................................................................................................. 826
RP-DATA RPDU ................................................................................................................................ 826
6.6A.3
Short Message Transfer Layer (SM-TL) messages .................................................................................. 827
SMS-DELIVER .................................................................................................................................. 827
SMS-SUBMIT .................................................................................................................................... 827
6.6B
Reference radio bearer configurations ............................................................................................................ 828
6.6B.1
SRB and DRB parameters and combinations ........................................................................................... 828
6.6B.1.1
SRB and DRB parameters ................................................................................................................... 828
6.6B.1.1.1
Physical Layer configurations ....................................................................................................... 828
6.7
Timer Tolerances............................................................................................................................................ 828
6.8
SideLink reference configuration ................................................................................................................... 829
6.8.1
Reference configuration for Direct Communication................................................................................. 829
6.8.1.1
ProSe Direct Communication Preconfiguration for out-of-network coverage operation ................... 829
6.8.2
Reference configuration for V2X Sidelink Communication..................................................................... 832
6.8.2.1
V2X Sidelink Communication Preconfiguration for out-of-network coverage operation .................. 832
7
Test environment for RRM tests ..........................................................................................................832
7.1
Requirements of test equipment ..................................................................................................................... 832
7.2
RRM Reference system configurations .......................................................................................................... 832
7.2.1
Common parameters for simulated E-UTRA cells ................................................................................... 832
7.2.1.1
Combinations of system information blocks ....................................................................................... 832
7.2.1.2
Scheduling of system information blocks ........................................................................................... 832
7.2.1.3
Common contents of system information messages ........................................................................... 832
7.2.2
Common parameters for simulated GERAN cells .................................................................................... 834
7.2.2.1
Mapping of GERAN cells ................................................................................................................... 834
7.2A
Generic RRM procedures ............................................................................................................................... 835
7.2A.1
UE RRM test states ................................................................................................................................... 835
7.2A.2
UE Registration, UE Test Mode Activated (State 2A-RF) ....................................................................... 835
7.2A.2A
UE Registration, UE Test Mode Activated in cell supporting BL/CE UE (State 2A-RF-CE) ................. 835
7.2A.3
Generic Default Radio Bearer Establishment, UE Test Mode Activated (State 3A-RF) .......................... 836
7.2A.3A
DC MCG/SCG Dedicated RB established, UE Test Mode Activated (State 3A-RF-DC1)...................... 836
7.2A.3AA
Generic Default Radio Bearer Establishment, UE Test Mode Activated in cell supporting BL/CE UE
(State 3A-RF-CE) ..................................................................................................................................... 836
7.2A.3B
DC Split Default RB established, UE Test Mode Activated (State 3A-RF-DC2) .................................... 836
7.2A.3C
Generic Default Radio Bearer Establishment, UE Test Mode Activated, V2X Setup (State 3A-RFV2X) ......................................................................................................................................................... 836
7.2A.4
Generic Default Radio Bearer Establishment, UE Test Mode Activated, pre-registration on HRPD
(State 3B-RF) ............................................................................................................................................ 836
7.2A.4.1
Initial conditions ................................................................................................................................. 836
7.2A.4.2
Definition of system information messages ........................................................................................ 836
7.2A.4.3
Procedure ............................................................................................................................................ 837
7.2A.4.4
Specific message contents ................................................................................................................... 837
7.2A.5
Procedure to configure SCC ..................................................................................................................... 837
7.2A.6
Exceptions for feICIC tests ....................................................................................................................... 837
7.2B
Other generic RRM procedures ...................................................................................................................... 837
7.2B.1
Tracking area updating procedure............................................................................................................. 837
7.3
Default RRC message and information elements contents ............................................................................. 839
7.3.1
Contents of RRC messages ....................................................................................................................... 839
7.3.2
Radio resource control information elements ........................................................................................... 839
7.3.3
Measurement information elements .......................................................................................................... 840
7.3A
Default UTRA message and information element contents ........................................................................... 841
7.3A.1
UTRA RRC messages .............................................................................................................................. 841
7.4
Default NAS message and information elements contents ............................................................................. 841
7.5
Reference radio bearer configurations ............................................................................................................ 841
7.5.1
SRB and DRB parameters ........................................................................................................................ 841
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
7.5.1.1
8
23
ETSI TS 136 508 V15.5.0 (2019-07)
MAC configurations............................................................................................................................ 841
NB-IoT test environment......................................................................................................................843
8.1
NB-IoT Common test environment ................................................................................................................ 843
8.1.1
NB-IoT Environmental conditions ........................................................................................................... 843
8.1.2
NB-IoT Common requirements of test equipment.................................................................................... 843
8.1.3
NB-IoT Reference test conditions ............................................................................................................ 843
8.1.3.1
NB-IoT Test frequencies ..................................................................................................................... 843
8.1.3.1.1
NB-IoT FDD Mode Test frequencies ............................................................................................ 844
8.1.3.2
NB-IoT Radio conditions .................................................................................................................... 861
8.1.3.2.1
NB-IoT Normal propagation condition ......................................................................................... 861
8.1.3.3
NB-IoT Physical channel allocations .................................................................................................. 861
8.1.3.3.1
NB-IoT Antennas .......................................................................................................................... 861
8.1.3.3.2
NB-IoT Downlink physical channels and physical signals ........................................................... 861
8.1.3.3.3
NB-IoT Mapping of downlink physical channels and signals to physical resources..................... 862
8.1.3.3.4
NB-IoT Uplink physical channels and physical signals ................................................................ 864
8.1.3.3.5
NB-IoT Mapping of uplink physical channels and signals to physical resources ......................... 864
8.1.3.4
NB-IoT Signal levels........................................................................................................................... 864
8.1.3.4.1
NB-IoT Downlink signal levels ..................................................................................................... 864
8.1.3.4.2
NB-IoT Uplink signal levels.......................................................................................................... 864
8.1.3.5
NB-IoT Standard test signals .............................................................................................................. 865
8.1.3.5.1
NB-IoT Downlink test signals ....................................................................................................... 865
8.1.3.5.2
NB-IoT Uplink test signals ............................................................................................................ 865
8.1.3.6
NB-IoT Physical layer parameters ...................................................................................................... 865
8.1.3.6.1
NB-IoT Downlink physical layer parameters ................................................................................ 865
8.1.4
NB-IoT Reference system configurations................................................................................................. 868
8.1.4.1
NB-IoT Simulated network scenarios ................................................................................................. 868
8.1.4.1.1
NB-IoT Single cell network scenarios ........................................................................................... 868
8.1.4.1.2
NB-IoT single mode multi cell network scenarios ........................................................................ 868
8.1.4.2
NB-IoT Simulated cells....................................................................................................................... 869
8.1.4.3
NB-IoT Common parameters for simulated cells ............................................................................... 872
8.1.4.3.1
NB-IoT Common configurations of system information blocks ................................................... 872
8.1.4.3.1.1
NB-IoT Combinations of system information blocks .............................................................. 872
8.1.4.3.1.2
NB-IoT Scheduling of system information blocks .................................................................. 873
8.1.4.3.2
NB-IoT Common contents of system information messages ........................................................ 874
MasterInformationBlock-NB ................................................................................................... 874
SystemInformation-NB ............................................................................................................ 876
SystemInformationBlockType1-NB ........................................................................................ 877
8.1.4.3.3
NB-IoT Common contents of system information blocks ............................................................. 878
SystemInformationBlockType2-NB ........................................................................................ 878
SystemInformationBlockType3-NB ........................................................................................ 879
SystemInformationBlockType4-NB ........................................................................................ 879
SystemInformationBlockType5-NB ........................................................................................ 880
SystemInformationBlockType14-NB ...................................................................................... 881
SystemInformationBlockType15-NB ...................................................................................... 882
SystemInformationBlockType16-NB ...................................................................................... 882
SystemInformationBlockType20-NB ...................................................................................... 882
SystemInformationBlockType22-NB ...................................................................................... 882
8.1.5
NB-IoT Generic procedures...................................................................................................................... 883
8.1.5.0
General ................................................................................................................................................ 883
8.1.5.1
NB-IoT UE test states ......................................................................................................................... 883
8.1.5.2
NB-IoT UE Attach, Connected mode (State 2-NB) ............................................................................ 885
8.1.5.2.0
General .......................................................................................................................................... 885
8.1.5.2.1
Initial conditions ............................................................................................................................ 886
8.1.5.2.2
Definition of system information messages................................................................................... 886
8.1.5.2.3
Procedure ....................................................................................................................................... 887
8.1.5.2.4
Specific message contents ............................................................................................................. 889
8.1.5.2A
NB-IoT UE Attach, Connected mode, UE Test Mode Activated (State 2A-NB) ............................... 889
8.1.5.2A.0
General .......................................................................................................................................... 889
8.1.5.2A.1
Initial conditions ............................................................................................................................ 889
8.1.5.2A.2
Definition of system information messages................................................................................... 890
8.1.5.2A.3
Procedure ....................................................................................................................................... 890
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
8.1.5.2A.4
8.1.5.2B
8.1.5.2B.1
8.1.5.2B.2
8.1.5.2B.3
8.1.5.2B.4
8.1.5.3
8.1.5.3.1
8.1.5.3.2
8.1.5.3.3
8.1.5.3.4
8.1.5.3A
8.1.5.3A.1
8.1.5.3A.2
8.1.5.3A.3
8.1.5.3A.4
8.1.5.4
8.1.5A
8.1.5A.1
8.1.5A.2
8.1.5A.2.1
8.1.5A.2.2
8.1.5A.2.3
8.1.5A.2.4
8.1.5A.3
8.1.5A.3.1
8.1.5A.3.2
8.1.5A.3.3
8.1.5A.3.4
8.1.5A.3A
8.1.5A.3A.1
8.1.5A.3A.2
8.1.5A.3A.3
8.1.5A.3A.4
8.1.5A.4
8.1.5A.4.1
8.1.5A.4.2
8.1.5A.4.3
8.1.5A.4.4
8.1.5A.5
8.1.5A.6
8.1.5A.7
8.1.5A.8
8.1.5A.9
8.1.5A.9.1
8.1.5A.9.2
8.1.5A.9.3
8.1.5A.9.4
8.1.6
8.1.6.1
–
–
–
–
–
–
–
–
–
24
ETSI TS 136 508 V15.5.0 (2019-07)
Specific message contents ............................................................................................................. 890
NB-IoT UE Attach, Connected Mode, UE Test Loopback Activated (State 2B-NB) ........................ 891
Initial conditions ............................................................................................................................ 891
Definition of system information messages................................................................................... 891
Procedure ....................................................................................................................................... 891
Specific message contents ............................................................................................................. 891
NB-IoT UE Registered, Idle Mode (State 3-NB) ................................................................................ 892
Initial conditions ............................................................................................................................ 892
Definition of system information messages................................................................................... 893
Procedure ....................................................................................................................................... 893
Specific message contents ............................................................................................................. 893
NB-IoT UE Registered, Idle Mode, UE Test Mode Activated (State 3A-NB) ................................... 893
Initial conditions ............................................................................................................................ 893
Definition of system information messages................................................................................... 893
Procedure ....................................................................................................................................... 893
Specific message contents ............................................................................................................. 893
Void..................................................................................................................................................... 894
Other generic procedures .......................................................................................................................... 894
Procedure for IP address allocation in the CP CIoT............................................................................ 894
Test procedure to check UE response to Paging for Control Plane CIoT MT access ......................... 894
Initial conditions ............................................................................................................................ 894
Definition of system information messages................................................................................... 894
Procedure ....................................................................................................................................... 895
Specific message contents ............................................................................................................. 896
Test procedure to check UE initiation of Control Plane CIoT MO user data transfer non-SMS
transport .............................................................................................................................................. 899
Initial conditions ............................................................................................................................ 899
Definition of system information messages................................................................................... 899
Procedure ....................................................................................................................................... 900
Specific message contents ............................................................................................................. 900
Test procedure to check UE initiation of Control Plane CIoT MO user data transfer SMS
transport .............................................................................................................................................. 904
Initial conditions ............................................................................................................................ 904
Definition of system information messages................................................................................... 904
Procedure ....................................................................................................................................... 905
Specific message contents ............................................................................................................. 905
Test procedure to check release of PDN connectivity before leaving RRC-CONNECTED for
attach without PDN ............................................................................................................................. 909
Initial conditions ............................................................................................................................ 909
Definition of system information messages................................................................................... 909
Procedure ....................................................................................................................................... 910
Specific message contents ............................................................................................................. 910
Test procedure to check that NB-IoT UE is camped on a new NB-IOT cell ...................................... 910
Test procedure to check that NB-IoT UE resume RRC connection on a new NB-IOT cell ............... 911
912
Test procedure to check RRC_CONNECTED state for NB-IoT ........................................................ 912
Test Procedure to establish radio bearers in User Plane ...................................................................... 912
Initial conditions ............................................................................................................................ 912
Definition of system information messages................................................................................... 912
Procedure ....................................................................................................................................... 913
Specific message contents ............................................................................................................. 913
NB-IoT Default RRC message and information elements contents.......................................................... 913
NB-IoT Contents of RRC messages.................................................................................................... 914
DLInformationTransfer-NB ................................................................................................................ 914
Paging-NB........................................................................................................................................... 914
RRCConnectionReconfiguration-NB .................................................................................................. 915
RRCConnectionReconfigurationComplete-NB ................................................................................... 915
RRCConnectionReestablishment-NB .................................................................................................. 916
RRCConnectionReestablishmentComplete-NB ................................................................................... 916
RRCConnectionReestablishmentRequest-NB ...................................................................................... 917
RRCConnectionReject-NB .................................................................................................................. 917
RRCConnectionRelease-NB ................................................................................................................ 918
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
25
ETSI TS 136 508 V15.5.0 (2019-07)
–
RRCConnectionRequest-NB ................................................................................................................ 918
–
RRCConnectionResume-NB ................................................................................................................ 919
–
RRCConnectionResumeComplete-NB ................................................................................................. 919
–
RRCConnectionResumeRequest-NB ................................................................................................... 920
–
RRCConnectionSetup-NB ................................................................................................................... 920
–
RRCConnectionSetupComplete-NB .................................................................................................... 921
–
UECapabilityEnquiry-NB ................................................................................................................... 922
–
UECapabilityInformation-NB ............................................................................................................. 922
–
ULInformationTransfer-NB ................................................................................................................ 923
8.1.6.2
NB-IoT System information blocks .................................................................................................... 923
8.1.6.3
NB-IoT Radio resource control information elements ........................................................................ 923
–
BCCH-Config-NB-DEFAULT ........................................................................................................... 923
–
DL-CarrierConfigCommon-NB-DEFAULT....................................................................................... 923
–
PCCH-Config-NB-DEFAULT............................................................................................................ 924
–
NPDCCH-ConfigDedicated-NB-DEFAULT ...................................................................................... 924
–
NPDSCH-ConfigCommon-NB-DEFAULT ....................................................................................... 924
–
NPRACH-ConfigSIB-NB-DEFAULT ................................................................................................ 925
–
NPUSCH-ConfigCommon-NB-DEFAULT ....................................................................................... 925
–
NPUSCH-ConfigDedicated-NB-DEFAULT ...................................................................................... 925
–
RACH-ConfigCommon-NB-DEFAULT ............................................................................................ 926
–
RadioResourceConfigCommonSIB-NB-DEFAULT .......................................................................... 926
–
RadioResourceConfigDedicated-NB-SRB ......................................................................................... 927
–
RadioResourceConfigDedicated-NB-DRB(n) .................................................................................... 927
RadioResourceConfigDedicated-NB-DRB-ADD(bid) ....................................................................... 928
RadioResourceConfigDedicated-NB-DRB-REL(bid) ........................................................................ 928
–
RLC-Config-NB-SRB-RECONFIG.................................................................................................... 928
–
SRB-ToAddModList-NB-RECONFIG ............................................................................................... 929
–
UplinkPowerControlCommon-NB-DEFAULT .................................................................................. 929
–
UplinkPowerControlDedicated-NB-DEFAULT ................................................................................. 929
RadioResourceConfigDedicated-NB-DRB-Mod ................................................................................ 929
8.1.6.4
NB-IoT Security control information elements ................................................................................... 930
8.1.6.5
NB-IoT Other information elements ................................................................................................... 930
–
RRC-TransactionIdentifier-DL ........................................................................................................... 930
–
RRC-TransactionIdentifier-UL ........................................................................................................... 930
8.1.7
NB-IoT Default NAS message and information element contents ........................................................... 930
8.1.7A
NB-IoT Default TC message and information element contents .............................................................. 930
8.1.8
NB-IoT Reference radio bearer configurations......................................................................................... 931
8.1.8.1
General ................................................................................................................................................ 931
8.1.8.2
NB-IoT SRB and DRB parameters and combinations ........................................................................ 931
8.1.8.2.1
NB-IoT SRB and DRB parameters................................................................................................ 931
8.1.9
NB-IoT Common test USIM parameters .................................................................................................. 933
8.1.9.1
General ................................................................................................................................................ 933
8.2
NB-IoT Test environment for RF test ............................................................................................................ 933
8.2.1
NB-IoT Requirements of test equipment .................................................................................................. 933
8.2.2
NB-IoT RF Reference system configurations ........................................................................................... 934
8.2.2.1
NB-IoT Common parameters for simulated E-UTRA cells ................................................................ 934
8.2.2.1.1
NB-IoT Combinations of system information blocks .................................................................... 934
8.2.2.1.2
NB-IoT Scheduling of system information blocks ........................................................................ 934
8.2.2.1.3
NB-IoT Common contents of system information messages ........................................................ 934
8.2.2A
NB-IoT Generic RF procedures ................................................................................................................ 934
8.2.3
NB-IoT Default RRC message and information elements contents.......................................................... 934
8.2.3.1
NB-IoT Radio resource control information elements ........................................................................ 934
8.2.4
NB-IoT Default NAS message and information elements contents.......................................................... 935
8.2.5
NB-IoT Reference radio bearer configurations......................................................................................... 935
8.2.5.1
NB-IoT SRB and DRB parameters ..................................................................................................... 935
8.3
NB-IoT Test environment for Signalling test ................................................................................................. 935
8.3.1
NB-IoT Requirements of test equipment .................................................................................................. 935
8.3.2
NB-IoT Reference test conditions ............................................................................................................ 935
8.3.2.1
NB-IoT Physical channel allocations .................................................................................................. 935
8.3.2.2
NB-IoT Signal levels........................................................................................................................... 936
8.3.2.2.1
NB-IoT Downlink signal levels ..................................................................................................... 936
8.3.2.3
NB-IoT Default test frequencies ......................................................................................................... 936
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
26
ETSI TS 136 508 V15.5.0 (2019-07)
8.3.2.3.1
NB-IoT Test frequencies for signalling test .................................................................................. 936
8.3.3
NB-IoT Reference system configurations................................................................................................. 937
8.3.3.1
NB-IoT Default parameters specific for simulated cells ..................................................................... 938
8.3.3.1.1
Intra-frequency neighbouring cell list in SIB4-NB for NB-IoT cells ............................................ 938
8.3.3.1.2
Inter-frequency carrier frequency list in SIB5-NB for NB-IoT cells............................................. 938
8.3.3.2
NB-IoT Default configurations for NAS test cases ............................................................................. 939
8.3.3.3
NB-IoT Cell configurations ................................................................................................................ 940
8.3.4
NB-IoT Generic signalling procedures ..................................................................................................... 940
8.3.4.1
NB-IoT Initial UE states and setup procedures ................................................................................... 940
8.3.4.2
NB-IoT Reference procedures and test procedures for TTCN development ...................................... 940
8.3.4.3
NB-IoT Test case postambles for TTCN development ....................................................................... 940
8.3.5
NB-IoT Default RRC message and information element contents ........................................................... 940
8.3.6
NB-IoT Default NAS message and information element contents ........................................................... 940
8.3.7
NB-IoT Timer tolerances .......................................................................................................................... 940
8.4
NB-IOT Test environment for RRM tests ...................................................................................................... 940
8.4.1
NB-IoT Requirements of test equipment .................................................................................................. 940
8.4.2
NB-IoT RRM Reference system configurations ....................................................................................... 941
8.4.2.1
NB-IoT Common parameters for simulated NB-IoT cells .................................................................. 941
8.4.2.1.1
NB-IoT Combinations of system information blocks .................................................................... 941
8.4.2.1.2
NB-IoT Scheduling of system information blocks ........................................................................ 941
8.4.2.1.3
NB-IoT Common contents of system information messages ........................................................ 941
8.4.2A
NB-IoT Generic RRM procedures ............................................................................................................ 941
8.4.3
NB-IoT Default RRC message and information elements contents.......................................................... 941
8.4.3.1
NB-IoT Radio resource control information elements ........................................................................ 941
8.4.4
NB-IoT Default NAS message and information elements contents.......................................................... 941
8.4.5
NB-IoT Reference radio bearer configurations......................................................................................... 942
8.4.5.1
NB-IoT SRB and DRB parameters ..................................................................................................... 942
Annex A (informative):
Connection Diagrams ..................................................................................943
Annex B (informative):
Change history ...........................................................................................1077
History ..........................................................................................................................................................1117
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
27
ETSI TS 136 508 V15.5.0 (2019-07)
Foreword
This Technical Specification has been produced by the 3rd Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
Introduction
The definition of the Conformance Tests for UE in E-UTRAN will be a complex task as the complete test suite covers
RF, EMC and Protocol aspects of the UE.
Each test requires a Test Environment to be defined in which the UE has to operate to defined standards, constraints and
performance. The overall task can be simplified if there are a number of well defined and agreed Common Test
Environments where every one can be used for a number of tests. Hence the present document defines testing
conditions that are common to several tests avoiding the need to duplicate the same information for every single test.
The present document defines default values for a variety of common areas. Where values are not specified in test
cases, the defaults in the present document will apply. If specified, the test case values will take precedence.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
1
28
ETSI TS 136 508 V15.5.0 (2019-07)
Scope
The present document contains definitions of reference conditions and test signals, default parameters, reference radio
bearer configurations used in radio bearer interoperability testing, common radio bearer configurations for other test
purposes, common requirements for test equipment and generic set-up procedures for use in conformance tests for the
3rd Generation E-UTRAN User Equipment (UE).
2
References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
-
References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
-
For a specific reference, subsequent revisions do not apply.
-
For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document unless the context in which the reference is made suggests a different Release is
relevant (information on the applicable release in a particular context can be found in e.g. test case title,
description or applicability, message description or content).
[1]
3GPP TR 21.905: "Vocabulary for 3GPP Specifications".
[2]
3GPP TS 23.003: "Numbering, addressing and identification".
[3]
3GPP TS 23.122: "Non-Access-Stratum functions related to Mobile Station (MS) in idle mode".
[4]
3GPP TS 24.008: "Mobile radio interface Layer 3 specification; Core network protocols; Stage 3".
[5]
3GPP TS 34.108: "Common Test Environments for User Equipment (UE); Conformance testing".
[6]
3GPP TS 34.109: "Terminal logical test interface; Special conformance testing functions".
[7]
3GPP TS 34.123-1: "User Equipment (UE) conformance specification; Part 1: Protocol
conformance specification".
[8]
3GPP TS 34.123-2: "User Equipment (UE) conformance specification; Part 2: Implementation
conformance statement (ICS) specification".
[9]
3GPP TS 34.123-3: "User Equipment (UE) conformance specification; Part 3: Abstract test suites
(ATSs)".
[10]
3GPP TS 36.300: "Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal
Terrestrial Radio Access Network (E-UTRAN); Overall description; Stage 2".
[11]
3GPP TS 36.302: "Evolved Universal Terrestrial Radio Access (E-UTRA); Services provided by
the physical layer".
[12]
3GPP TS 36.304: "Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE)
procedures in idle mode".
[13]
3GPP TS 36.306: "Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE)
radio access capabilities".
[14]
3GPP TS 36.321: "Evolved Universal Terrestrial Radio Access (E-UTRA); Medium Access
Control (MAC) protocol specification".
[15]
3GPP TS 36.322: "Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Link Control
(RLC) protocol specification".
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
29
ETSI TS 136 508 V15.5.0 (2019-07)
[16]
3GPP TS 36.323: "Evolved Universal Terrestrial Radio Access (E-UTRA); Packet Data
Convergence Protocol (PDCP) specification".
[17]
3GPP TS 36.331: "Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource
Control (RRC); Protocol Specification".
[18]
3GPP TS 36.523-1: "Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet
Core (EPC); User Equipment (UE) conformance specification; Part 1: Protocol conformance
specification".
[19]
3GPP TS 36.523-2: "Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet
Core (EPC); User Equipment (UE) conformance specification; Part 2: Implementation
Conformance Statement (ICS) proforma specification".
[20]
3GPP TS 36.523-3: "Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet
Core (EPC); User Equipment (UE) conformance specification; Part 3: Abstract Test Suites
(ATS)".
[21]
3GPP TS 36.521-1: "Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment
(UE) conformance specification; Radio transmission and reception; Part 1: conformance testing".
[22]
3GPP TS 36.521-2: "Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment
(UE) conformance specification; Radio transmission and reception; Part 2: Implementation
Conformance Statement (ICS)".
[23]
3GPP TR 24.801: "3GPP System Architecture Evolution; CT WG1 aspects".
[24]
3GPP TS 23.401: "General Packet Radio Service (GPRS) enhancements for Evolved Universal
Terrestrial Access Network (E-UTRAN) access".
[25]
3GPP TS 51.010-1: "Mobile Station (MS) conformance specification; Part 1: Conformance
specification ".
[26]
ISO/IEC 9646 (all parts): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework".
[27]
3GPP TS 36.101: "Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE)
radio transmission and reception".
[28]
3GPP TS 24.301: "Non-Access-Stratum (NAS) protocol for Evolved Packet System (EPS); Stage
3".
[29]
3GPP TS 36.213: "Evolved Universal Terrestrial Radio Access (E-UTRA); Physical layer
procedures".
[30]
3GPP TS 36.104: "Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS)
radio transmission and reception".
[31]
3GPP TS 33.401: "3GPP System Architecture Evolution (SAE); Security architecture".
[32]
3GPP TS 31.101: "UICC-terminal interface; Physical and logical characteristics".
[33]
3GPP TS 31.102: "Characteristics of the Universal Subscriber Identity Module (USIM)
application".
[34]
3GPP TS 36.521-3: "Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment
(UE) conformance specification; Radio transmission and reception; Part 3: Radio Resource
Management conformance testing".
[35]
3GPP TS 36.211: "Evolved Universal Terrestrial Radio Access (E-UTRA); Physical channels and
modulation".
[36]
3GPP2 TSG-C C.S0038-B v1.0: "Signalling Conformance Specification for High Rate Packet
Data Air Interface".
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
30
ETSI TS 136 508 V15.5.0 (2019-07)
[37]
3GPP2 TSG-C C.S0043-A v1.0: "Signalling Conformance Test Specification for cdma2000
Spread Spectrum Systems".
[38]
3GPP TS 36.509: "Evolved Universal Terrestrial Radio Access (E-UTRA); Special conformance
testing functions for User Equipment (UE)"
[39]
3GPP TS 36.133: "Evolved Universal Terrestrial Radio Access (E-UTRA); Requirements for
support of radio resource management"
[40]
3GPP TS 24.229: "IP multimedia call control protocol based on Session Initiation Protocol (SIP)
and Session Description Protocol (SDP); Stage 3"
[41]
3GPP TS 23.402: “Architecture enhancements for non-3GPP accesses”
[42]
3GPP2 X.S0057-0-B v1.0 “E-UTRAN - eHRPD Connectivity and Interworking: Core Network
Aspects”
[43]
3GPP TS 34.229-1: "Internet Protocol (IP) multimedia call control protocol based on Session
Initiation Protocol (SIP) and Session Description Protocol (SDP); User Equipment (UE)
conformance specification; Part 1: Protocol conformance specification ".
[44]
3GPP2 C.S0024-B v3.0: "cdma2000 High Rate Packet Data Air Interface Specification".
[45]
3GPP TS 31.103: "Characteristics of the IP Multimedia Services Identity Module (ISIM)
application".
[46]
3GPP TS 34.229-1: "Internet Protocol (IP) multimedia call control protocol based on Session
Initiation Protocol (SIP) and Session Description Protocol (SDP); User Equipment (UE)
conformance specification; Part 1: Protocol conformance specification".
[47]
3GPP TS 34.229-3: "Internet Protocol (IP) multimedia call control protocol based on Session
Initiation Protocol (SIP) and Session Description Protocol (SDP); User Equipment (UE)
conformance specification; Part 3: Abstract Test Suite (ATS)".
[48]
3GPP2 C.S0065-B v2.0: "cdma2000 Application on UICC for Spread Spectrum Systems".
[49]
3GPP2 C.S0005-F v1.0: "Upper Layer (Layer 3) Signalling Standard for cdma2000 Spread
Spectrum Systems – Release A, Addendum 2".
[50]
3GPP TS 34.121-1: "User Equipment (UE) conformance specification; Radio transmission and
reception (FDD); Part 1: Conformance specification ".
[51]
3GPP TS 34.122: "Terminal conformance specification; Radio transmission and reception
(TDD)".
[52]
GSMA PRD IR.92: "IMS Profile for Voice and SMS".
[53]
3GPP TS 24.302: "Access to the 3GPP Evolved Packet Core (EPC)
via non-3GPP access networks; Stage 3".
[54]
Void
[55]
3GPP TS 33.402: "3GPP System Architecture Evolution (SAE);Security aspects of non-3GPP
accesses".
[56]
GSMA PRD IR.88: "LTE and EPC Roaming Guidelines".
[57]
IETF RFC 5996: "Internet Key Exchange Protocol Version 2 (IKEv2)".
[58]
3GPP TS 24.334: "Proximity-services (ProSe) User Equipment (UE) to ProSe function protocol
aspects; Stage 3".
[59]
3GPP TS 23.303: "Proximity-based services (ProSe); Stage 2"
[60]
3GPP TS 33.303: "Proximity-based Services (ProSe); Security aspects"
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
31
ETSI TS 136 508 V15.5.0 (2019-07)
[61]
3GPP TS 33.220: "Generic Authentication Architecture (GAA); Generic Bootstrapping
Architecture (GBA)"
[62]
3GPP TS 36.212: "Multiplexing and channel coding"
[63]
IETF RFC 4346: "The Transport Layer Security (TLS) Protocol Version 1.1".
[64]
3GPP TS 33.310: "Network Domain Security (NDS); Authentication Framework (AF)".
[65]
3GPP TS 26.114: "IP Multimedia Subsystem (IMS);Multimedia Telephony;Media handling and
interaction".
[66]
3GPP TS 24.483: "Mission Critical Push To Talk (MCPTT) Management Object (MO)".
[67]
3GPP TS 38.508-1: "5GS; Common test environments for User Equipment (UE) conformance
testing"
[68]
3GPP TS 37.571-1: "User Equipment (UE) conformance specification for UE positioning; Part 1:
Terminal conformance"
[69]
3GPP TS 37.571-5: "User Equipment (UE) conformance specification for UE positioning; Part 5:
Test scenarios and assistance data"
[70]
STANAG 4294: "NATO STANAG 4294. Navstar Global Positioning System (GPS) System
Characteristics"
[71]
3GPP TS 38.523-1: "5GS; User Equipment (UE) conformance specification; Part 1: Protocol
Conformance Specification"
[72]
3GPP TS 38.133: "New Radio (NR); Requirements for support of radio resource management".
3
Definitions, symbols and abbreviations
3.1
Definitions
For the purposes of the present document, the terms and definitions given in TR 21.905 [1] apply, unless specified
below:
B: a value followed by "B" is a binary value.
H: a value followed by "H" is a hexadecimal value.
3.2
Symbols
For the purposes of the present document, the following symbols apply:
NDL
NRB
NRB_agg
Downlink EARFCN
Transmission bandwidth configuration, expressed in units of resource blocks
Aggregated Transmission Bandwidth Configuration. The number of the aggregated RBs within the
fully allocated Aggregated Channel bandwidth.
Uplink EARFCN
NUL
3.3
Abbreviations
For the purposes of the present document, the abbreviations specified in TR 21.905 [1] apply, with any additional
abbreviations specified below:
1xRTT
BR
BR-BCCH
BL
1x Radio Transmission Technology
Bandwidth Reduced
Bandwidth Reduced Broadcast Control Channel
Bandwidth reduced Low complexity
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
CA
CC
CE
DRB
EARFCN
ECM
eIMTA
EMM
ENB
EPRE
ESM
HRPD
MAC
MBS
MCS
MTC
OFDM
RBs
ROHC
SS
TH
TL
TP
V2X
VH
VL
xCH_RA
xCH_RB
32
ETSI TS 136 508 V15.5.0 (2019-07)
Carrier Aggregation
Component Carrier
Coverage Enhancement
(user) Data Radio Bearer
E-UTRA Absolute Radio Frequency Channel Number
EPS Connection Management
Enhanced Interference Management and Traffic Adaptation
EPS Mobility Management
Evolved Node B
Energy Per Resource Element
EPS Session Management
High Rate Packet Data
Media Access Control
Metropolitan Beacon System
Mission Critical Services
Machine Type Communication
Orthogonal Frequency Division Multiplexing
Resource Blocks
Robust Header Compression
System Simulator
Temperature High
Temperature Low
Transmission Point
Vehicle-to-Everything
Higher extreme Voltage
Lower extreme Voltage
xCH-to-RS EPRE ratio for the channel xCH in all transmitted OFDM symbols not containing RS
xCH-to-RS EPRE ratio for the channel xCH in all transmitted OFDM symbols containing RS
4
Common test environment
4.1
Environmental conditions
The requirements in this clause apply to all types of UE(s).
4.1.1
Temperature
The UE shall fulfil all the requirements in the full temperature range of:
Table 4.1.1-1: Temperature Test Environment
+15°C to +35°C
-10°C to +55°C
for normal conditions (with relative humidity up to 75 %)
for extreme conditions (see IEC publications 68-2-1 and 68-2-2)
Outside this temperature range the UE, if powered on, shall not make ineffective use of the radio frequency spectrum.
In no case shall the UE exceed the transmitted levels as defined in TS 36.101 [27] for extreme operation.
The normative reference for this requirement is TS 36.101 [27] Annex E.1.
Some tests are performed also in extreme temperature conditions. These test conditions are denoted as TL (temperature
low, -10°C) and TH (temperature high, +55°C).
4.1.2
Voltage
The UE shall fulfil all the requirements in the full voltage range, i.e. the voltage range between the extreme voltages.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
33
ETSI TS 136 508 V15.5.0 (2019-07)
The manufacturer shall declare the lower and higher extreme voltages and the approximate shutdown voltage. For the
equipment that can be operated from one or more of the power sources listed below, the lower extreme voltage shall not
be higher, and the higher extreme voltage shall not be lower than that specified below.
Table 4.1.2-1: Voltage Test Environment
Power source
AC mains
Regulated lead acid battery
Non regulated batteries:
Leclanché
Lithium
Mercury/nickel & cadmium
Lower extreme
voltage
0,9 * nominal
0,9 * nominal
Higher extreme
voltage
1,1 * nominal
1,3 * nominal
Normal conditions
voltage
nominal
1,1 * nominal
0,85 * nominal
0,95 * nominal
0,90 * nominal
Nominal
1,1 * Nominal
Nominal
1,1 * Nominal
Nominal
Outside this voltage range the UE if powered on, shall not make ineffective use of the radio frequency spectrum. In no
case shall the UE exceed the transmitted levels as defined in TS 36.101 [27] for extreme operation. In particular, the UE
shall inhibit all RF transmissions when the power supply voltage is below the manufacturer declared shutdown voltage.
The normative reference for this requirement is TS 36.101 [27] Annex E.2.
Some tests are performed also in extreme voltage conditions. These test conditions are denoted as VL (lower extreme
voltage) and VH (higher extreme voltage).
4.2
Common requirements of test equipment
Mobile conformance testing can be categorized into 3 distinct areas:
-
RF Conformance Testing.
-
EMC Conformance Testing.
-
Signalling Conformance Testing.
The test equipment required for each category of testing may or not be different, depending on the supplier of the test
equipment. However, there will be some generic requirements of the test equipment that are essential for all three
categories of test, and these are specified in this clause.
In addition, there will be requirements to test operation in multi-system configurations (e.g. EUTRAN plus UTRAN).
However, these would not form a common test equipment requirement for the three test areas and are not considered in
the present document.
The test equipment shall use the same number of Tx antennas for all parts of the tests, Initial condition and Test
procedure, as specified in the minimum requirement.
4.2.1
NOTE:
General functional requirements
This clause has been written such that it does not constrain the implementation of different architectures
and designs of test equipment.
All test equipment used to perform conformance testing on a UE shall provide a platform suitable for testing UE's that
are either:
a) FDD Mode; or
b) TDD Mode; or
c) both FDD/TDD Modes.
All test equipment shall provide (for the mode(s) supported) the following minimum functionality.
-
The capability of emulating a single E-UTRA cell with the appropriate channels to allow the UE to register on
the cell.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
34
ETSI TS 136 508 V15.5.0 (2019-07)
-
The capability to allow the UE to set up an RRC connection with the system simulator, and to maintain the
connection for the duration of the test.
-
The capability (for the specific test):
-
to select and support an appropriate radio bearer for the downlink;
-
to set the appropriate downlink power levels;
-
to set up and support the appropriate radio bearer for the uplink;
-
to set and control the uplink power levels.
4.2.2
Minimum functional requirements
4.2.2.1
Supported Cell Configuration
The System Simulator shall provide the capability to simulate a minimum number of cells (of the appropriate E-UTRA
Mode) whose number and capabilities are governed by the test cases that need to be performed (test cases are defined in
3GPP TS 36.523-1 [18](Signalling), 3GPP TS 36.521-1 [21] (RF) and 3GPP TS 36.521-3 [34] (RRM). For this purpose
test cases can be split into two different categories: Tests that require only one cell and Tests that require several cells.
To perform test cases requiring one cell, the system simulator must provide a cell offering the capabilities to perform all
the test cases in this category.
To perform test cases requiring several cells, additional cells must be provided by the system simulator. The additional
cells, however, need only provide a minimum set of capabilities so as to support the first cell in carrying out the
multicell test cases.
The type and number of channels (especially physical channels) constitute an important set of capabilities for a cell. The
following clauses list possible channels that may be supported by the SS. Each channel type, however, and the
minimum number of channels needed are only mandatory if specific test cases require them.
The mapping between Logical and Transport channels is as described in 3GPP TS 36.321 [14]. Similarly the mapping
between Transport channels and Physical channels is as described in 3GPP TS 36.211, TS 36.302 and TS 36.212. The
reference measurement channels (mapping between Transport channels and Physical channels for PDSCH/PDCCH) are
defined in 3GPP TS 36.521-1[21] annex A
4.2.2.1.1
Supported Channels
4.2.2.1.1.1
Logical channels
Logical channel
BCCH
BR-BCCH
CCCH
DCCH
PCCH
DTCH
4.2.2.1.1.2
Minimum number
Comments
1
1
For testing of BL/CE UE.
1
2
1
n <FFS>
Depending on SS's support for RB service testing
(See clause 12 of 3GPP TS 36.523-1 [18]
Transport channels
Transport channel
BCH
PCH
RACH
DL-SCH
UL-SCH
Minimum number
1
1
1
n <FFS>
n <FFS>
Comments
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.2.2.1.1.3
ETSI TS 136 508 V15.5.0 (2019-07)
Physical channels
Physical channel
PBCH
PCFICH
PDCCH
MPDCCH
PDSCH
PHICH
PUCCH
PUSCH
PRACH
4.2.2.1.1.4
Minimum number
Comments
1
Physical Broadcast Channel
1
The physical control format indicator channel carries information about the
number of OFDM symbols used for transmission of PDCCHs in a subframe
1
The physical downlink control channel carries scheduling assignments and
other control information.
1
The MTC physical downlink control channel carries scheduling
assignments and other control information for BL/CE UE.
1
Physical Downlink Shared Channel
[1]
The PHICH carries the hybrid-ARQ ACK/NAK
1
The physical uplink control channel carries uplink control information
1
Physical Uplink Shared Channel
1
Physical Random Access Channel
Physical signals
Physical signal
Demodulation
reference signal
Sounding
Reference signal
Cell-specific
Reference Signal
UE-specific
reference signal
Primary
synchronisation
signal
Secondary
synchronisation
signal
4.2.2.2
35
Minimum number
NA
UL
Comments
NA
UL TBD, if applicable
NA
DL
NA
DL
NA
DL
NA
DL
Support of Tcell timing offset
The timing offset in terms of frame start timing between any pair of TDD cells shall be < [3us]. For FDD cells there is
no such restriction.
4.2.2.3
Supported Sidelink Configuration
The System Simulator shall provide the capability to simulate a minimum number of UEs whose number and
capabilities are governed by the test cases that need to be performed (test cases are defined in 3GPP TS 36.523-1 [18]
(Signalling), 3GPP TS 36.521-1 [21] (RF) and 3GPP TS 36.521-3 [34] (RRM). For this purpose test cases can be split
into two different categories: Tests that require only one simulated UE and Tests that require several simulated UEs.
To perform test cases requiring one simulated UE, the system simulator shall provide a UE offering the capabilities to
perform all the test cases in this category.
The type and number of sidelink channels (especially physical channels) constitute an important set of capabilities for a
simulated UE. The following clauses list possible sidelink channels that may be supported by the SS. Each channel
type, however, and the minimum number of channels needed are only mandatory if specific test cases require them.
The mapping between Logical and Transport channels is as described in 3GPP TS 36.321 [14]. Similarly the mapping
between Transport channels and Physical channels is as described in 3GPP TS 36.211, TS 36.302 and TS 36.212.
4.2.2.3.1
4.2.2.3.1.1
Supported Sidelink Channels
Logical channels
Logical channel
Minimum number
Comments
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
STCH
SBCCH
4.2.2.3.1.2
ETSI TS 136 508 V15.5.0 (2019-07)
1
1
Transport channels
Transport channel
SL-BCH
SL-DCH
SL-SCH
4.2.2.3.1.3
Minimum number
1
1
1
Comments
Physical channels
Physical channel
PSBCH
PSCCH
PSDCH
PSSCH
4.2.2.3.1.4
Minimum number
1
1
1
1
Comments
Physical Sidelink Broadcast CHannel
Physical Sidelink Control CHannel
Physical Sidelink Discovery CHannel
Physical Sidelink Shared CHannel
Physical signals
Physical signal
Sidelink
Synchronization
Signals
4.3
36
Minimum number
NA
Sidelink Synchronization
Comments
Reference test conditions
This clause contains the reference test conditions, which apply to all test cases unless otherwise specified.
4.3.1
Test frequencies
The test frequencies are based on the E-UTRA frequency bands defined in the core specifications.
The raster spacing is 100 KHz.
E-UTRA/FDD is designed to operate in paired bands of 3GPP TS 36.101 [27]. The reference test frequencies for the RF
and Signalling test environment for each of the operating bands are defined in sub clause 4.3.1.1.
E-UTRA/TDD is designed to operate in unpaired bands of 3GPP TS 36.101 [27]. The reference test frequencies for the
RF and Signalling test environment for each of the operating bands are defined in sub clause 4.3.1.2.
For non-CA Signalling testing, E-UTRA frequency to be tested is mid range and E-UTRA channel bandwidth to be
tested is 5MHz for all operating bands for all test cases as the default configuration unless specific channel bandwidth is
specified for the operating band below:
For Band 11, 13, 18 and 20, channel bandwidth to be tested is 10 MHz as the default configuration.
For Band 38, 39, 40, 41 and 42, channel bandwidth to be tested is 20 MHz as the default configuration.
For operating band 46, the test frequencies defined in Clause 4.3.1.2.14 and 4.3.1.2.14A are derived based on the rules
defined in TS 36.104 [30], table 5.7.3-1 Note 3.
For CA Signalling testing with two component carriers, E-UTRA frequencies to be tested are according to sub clause
6.2.3.2 and the E-UTRA channel bandwidth combination is according to Table 4.3.1-1.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
37
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1-1: Default E-UTRA channel bandwidth combinations for CA Signalling testing with two
component carriers
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
CA configuration
(Band(s),BW Class,BW
Combination Set)
Intra-band contiguous and
Bandwidth Class C
Intra-band contiguous and
Bandwidth Class B
38
CA Channel Bandwidth
combination
carrier 1 + carrier 2
[MHz + MHz]
20+20
5+5
Inter-band CA and CA
Bandwidth Class Combination
A-A
10 + 10
CA_1A-19A
15 + 10
CA_1A-21A
15 + 15
CA_1A-41A
10 + 20
CA_1A-42A
15 + 20
CA_3A-19A
20 + 10
CA_3A-41A
20 + 20
CA_3A-42A
20 + 20
CA_19A-21A
10 + 15
CA_19A-42A
10 + 20
CA_21A-42A
15 + 20
CA_25A-26A
20 + 20
CA_26A-41A
10 + 20
CA_28A-41A
10 + 20
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
Comment
This channel bandwidth combination is
used for all Intra-band contiguous CA
configurations using Bandwidth Class C
unless specific channel bandwidth
combination is specified for a CA
configuration or CA Bandwidth
Combination Set by specific entries in
this table below.
This channel bandwidth combination is
used for all Intra-band contiguous CA
configurations using Bandwidth Class B
unless specific channel bandwidth
combination is specified for a CA
configuration or CA Bandwidth
Combination Set by specific entries in
this table below.
This channel bandwidth combination is
used for all Inter-band CA
configurations using Bandwidth Class
Combination A-A unless specific
channel bandwidth combination is
specified for a CA configuration or CA
Bandwidth Combination Set by specific
entries in this table below.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_1A-19A.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_1A-21A.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_1A-41A.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_1A-42A.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_3A-19A.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_3A-41A.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_3A-42A.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_19A-21A.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_19A-42A.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_21A-42A.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_25A-26A.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_26A-41A.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_28A-41A.
3GPP TS 36.508 version 15.5.0 Release 15
39
CA_28A-42A
10 + 20
CA_39A-41A
20+20
CA_41C-41C
20 + 20
CA_41A-42A
20 + 20
CA_39C
20 + 10
ETSI TS 136 508 V15.5.0 (2019-07)
This channel bandwidth combination is
used for Inter-band CA configuration
CA_28A-42A.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_39A-41A.
This channel bandwidth combination is
used for Intra-band CA configuration
CA_41C-41C.
This channel bandwidth combination is
used for Inter-band CA configuration
CA_41A-42A.
This channel bandwidth combination is
used for Intra-band contiguous CA
configuration CA_39C.
For CA Signalling testing with three component carriers, E-UTRA frequencies to be tested are according to sub clause
6.2.3.2 and the E-UTRA channel bandwidth combination is according to Table 4.3.1-2.
Table 4.3.1-2: Default E-UTRA channel bandwidth combinations for CA Signalling testing with three
component carriers
CA configuration
(Band(s),BW Class,BW
Combination Set)
Intra-band contiguous and
Bandwidth Class D
CA Channel Bandwidth
combination
carrier 1 + carrier 2 + carrier 3
[MHz + MHz + MHz]
20+20+20
Inter-band CA and CA
Bandwidth Class Combination
A-A-A
10+10+10
Mixed Inter-band and Intraband contiguous CA and CA
Bandwidth Class Combination
A-C or C-A
10+20+20 (A-C) or
20+20+10 (C-A)
Mixed Inter-band and Intraband contiguous CA and CA
Bandwidth Class Combination
A-B or B-A
10+5+5 (A-B) or
5+5+10 (B-A)
Comment
This channel bandwidth combination is
used for all Intra-band contiguous CA
configurations using Bandwidth Class D
unless specific channel bandwidth
combination is specified for a CA
configuration or CA Bandwidth
Combination Set by specific entries in
this table below.
This channel bandwidth combination is
used for all Inter-band contiguous CA
configurations using Bandwidth Class
Combination A-A-A unless specific
channel bandwidth combination is
specified for a CA configuration or CA
Bandwidth Combination Set by specific
entries in this table below.
This channel bandwidth combination is
used for all mixed Inter-band and Intraband contiguous CA configurations
using Bandwidth Class combination A-C
or C-A unless specific channel
bandwidth combination is specified for a
CA configuration or CA Bandwidth
Combination Set by specific entries in
this table below.
This channel bandwidth combination is
used for all mixed Inter-band and Intraband contiguous CA configurations
using Bandwidth Class combination A-B
or B-A unless specific channel
bandwidth combination is specified for a
CA configuration or CA Bandwidth
Combination Set by specific entries in
this table below.
For RF testing, E-UTRA frequencies to be tested are low range, mid range and high range for all supported operating
bands by default. E-UTRA channel bandwidths to be tested are lowest bandwidth, 5MHz bandwidth and highest
bandwidth for all supported operating bands by default. Actual test configurations are specified case by case and stated
in test case itself as the initial conditions.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
40
ETSI TS 136 508 V15.5.0 (2019-07)
The lowest bandwidth, 5MHz bandwidth and highest bandwidth are selected from the combined table which includes
nominal and additional channel bandwidth.
In the case 5MHz bandwidth is not supported by the UE, E-UTRA channel bandwidth to be tested is only lowest
bandwidth and highest bandwidth.
If channel bandwidth to be tested is equal to the lowest or highest channel bandwidth, then the same channel bandwidth
is not required to be tested twice.
In addition to the default channel bandwidths to be tested specified above, for Bands 2, 4, 18, 19, 20 and 25, an industry
requirement of testing in 10MHz channel bandwidth is allowed for test cases in chapters 6 and 7 in TS 36.521-1 [21].
Editor’s note: For RF testing, an industry requirement of testing in 10MHz channel bandwidth is requested for
Bands 2, 4, 18, 19, 20 and 25 for test cases in chapters 6 and 7 in TS 36.521-1 [21], changing the existing
test points to address this is being discussed in RAN5 and will be considered pending technical
justification.
For A-GNSS, MBS, WLAN and BLE testing in TS 37.571-1 [68], the E-UTRA frequency and channel bandwidth to be
tested follow the same rules as for Signalling testing above.
For intra-band non-contiguous CA (CA_XA-XA) test frequencies have been defined following the basic assumption
that CC1 uses the Low Range frequency of the band, while CC2 the High Range frequency. Additional test frequencies
not following this rule, are (should be) identified by notes.
For sidelink direct communication and sidelink direct discovery, operating band and bandwidth are specified in section
5.5D and 5.6D in TS 36.101 [27]. Sidelink direct communication and sidelink direct discovery operates in half duplex
mode using the uplink frequency of corresponding band.
For V2X sidelink communication, operating band and bandwidth are specified in section 5.5G and 5.6G in TS 36.101
[27]. V2X sidelink communication operates in half duplex mode using the uplink frequency of corresponding band.
4.3.1.1
FDD Mode Test frequencies
4.3.1.1.1
FDD reference test frequencies for operating band 1
Table 4.3.1.1.1-1: Test frequencies for E-UTRA channel bandwidth for operating band 1
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
NUL
18025
18050
18075
18100
18300
18575
18550
18525
18500
ETSI
Frequency of
Uplink [MHz]
1922.5
1925
1927.5
1930
1950
1977.5
1975
1972.5
1970
NDL
25
50
75
100
300
575
550
525
500
Frequency of
Downlink [MHz]
2112.5
2115
2117.5
2120
2140
2167.5
2165
2162.5
2160
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.1A
41
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for CA in operating band 1
Table 4.3.1.1.1A-1: Test frequencies for CA_1C
Range
Low
Mid
High
Note 1:
CCCombo /
NRB_agg
[RB]
75+75
100+100
75+75
100+100
75+75
100+100
BW
[RB]
NUL
CC1
Note1
fUL
[MHz]
75
100
75
100
75
100
18075
18100
18225
18201
18375
18302
1927.5
1930
1942.5
1940.1
1957.5
1950.2
NDL
fDL
[MHz]
BW
[RB]
75
100
225
201
375
302
2117.5
2120
2132.5
2130.1
2147.5
2140.2
75
100
75
100
75
100
NUL
CC2
Note1
fUL
[MHz]
NDL
fDL
[MHz]
18225
18298
18375
18399
18525
18500
1942.5
1949.8
1957.5
1959.9
1972.5
1970
225
298
375
399
525
500
2132.5
2139.8
2147.5
2149.9
2162.5
2160
Carriers in increasing frequency order.
4.3.1.1.2
FDD reference test frequencies for operating band 2
Table 4.3.1.1.2-1: Test frequencies for E-UTRA channel bandwidth for operating band 2
Test Frequency
ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
Frequency of
Downlink
[MHz]
1930.7
1931.5
1932.5
1935
1937.5
1940
1.4
18607
1850.7
607
3
18615
1851.5
615
5
18625
1852.5
625
Low Range
10
18650
1855
650
15 [1]
18675
1857.5
675
20 [1]
18700
1860
700
Mid Range
1.4/3/5/10
18900
1880
900
1960
15 [1]/20 [1]
1.4
19193
1909.3
1193
1989.3
3
19185
1908.5
1185
1988.5
5
19175
1907.5
1175
1987.5
High Range
10
19150
1905
1150
1985
15 [1]
19125
1902.5
1125
1982.5
20 [1]
19100
1900
1100
1980
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.2A
42
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for CA in operating band 2
Table 4.3.1.1.2A-1: Test frequencies for CA_2A-2A
Test
Frequency
ID
CCCombo
/
NRB_agg
[RB]
CC1
Note1
BW
fUL
[RB]
NUL
[MHz]
25
18625 1852.5
25+25
25
18625 1852.5
25+50
50
18650
1855
25
18625 1852.5
25+75
75
18675 1857.5
50
18650
1855
50+50
25
18625 1852.5
25+100
100
18700
1860
Max WGap
50
18650
1855
50+75
75
18675 1857.5
50
18650
1855
50+100
100
18700
1860
75
18675 1857.5
75+75
75
18675 1857.5
75+100
100
18700
1860
100
18700
1860
100+100
Note 1: Carriers in increasing frequency order.
Wgap
[MHz]
NDL
625
625
650
625
675
650
625
700
650
675
650
700
675
675
700
700
ETSI
fDL
[MHz]
1932.5
1932.5
1935
1932.5
1937.5
1935
1932.5
1940
1935
1937.5
1935
1940
1937.5
1937.5
1940
1940
50
45
45
40
40
40
35
35
35
35
30
30
30
25
25
20
BW
[RB]
25
50
25
75
25
50
100
25
75
50
100
50
75
100
75
100
NUL
19175
19150
19175
19125
19175
19150
19100
19175
19125
19150
19100
19150
19125
19100
19125
19100
CC2
Note1
fUL
[MHz]
1907.5
1905
1907.5
1902.5
1907.5
1905
1900
1907.5
1902.5
1905
1900
1905
1902.5
1900
1902.5
1900
NDL
1175
1150
1175
1125
1175
1150
1100
1175
1125
1150
1100
1150
1125
1100
1125
1100
fDL
[MHz]
1987.5
1985
1987.5
1982.5
1987.5
1985
1980
1987.5
1982.5
1985
1980
1985
1982.5
1980
1982.5
1980
3GPP TS 36.508 version 15.5.0 Release 15
43
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.1.2A-2: Test frequencies for CA_2C
Range
Low
CC-Combo /
NRB_agg
[RB]
25+100
50+75
50+100
75+75
75+100
Mid
100+100
25+100
50+75
50+100
75+75
75+100
High
100+100
25+100
50+75
50+100
75+75
75+100
100+100
Note 1:
BW
[RB]
NUL
CC1
Note1
fUL
[MHz]
25
100
50
75
50
100
75
75
100
100
25
100
50
75
50
100
75
75
100
100
25
100
50
75
50
100
75
75
100
100
18633
18700
18653
18675
18655
18700
18675
18678
18700
18700
18808
18875
18829
18851
18806
18851
18825
18803
18826
18801
18983
19050
19005
19027
18956
19001
18975
18929
18951
18902
1853.3
1860
1855.3
1857.5
1855.5
1860
1857.5
1857.8
1860
1860
1870.8
1877.5
1872.9
1875.1
1870.6
1875.1
1872.5
1870.3
1872.6
1870.1
1888.3
1895
1890.5
1892.7
1885.6
1890.1
1887.5
1882.9
1885.1
1880.2
NDL
fDL
[MHz]
BW
[RB]
633
700
653
675
655
700
675
678
700
700
808
875
829
851
806
851
825
803
826
801
983
1050
1005
1027
956
1001
975
929
951
902
1933.3
1940
1935.3
1937.5
1935.5
1940
1937.5
1937.8
1940
1940
1950.8
1957.5
1952.9
1955.1
1950.6
1955.1
1952.5
1950.3
1952.6
1950.1
1968.3
1975
1970.5
1972.7
1965.6
1970.1
1967.5
1962.9
1965.1
1960.2
100
25
75
50
100
50
75
100
75
100
100
25
75
50
100
50
75
100
75
100
100
25
75
50
100
50
75
100
75
100
Carriers in increasing frequency order.
ETSI
NUL
CC2
Note1
fUL
[MHz]
NDL
fDL
[MHz]
18750
18817
18773
18795
18799
18844
18825
18849
18871
18898
18925
18992
18949
18971
18950
18995
18975
18974
18997
18999
19100
19167
19125
19147
19100
19145
19125
19100
19122
19100
1865
1871.7
1867.3
1869.5
1869.9
1874.4
1872.5
1874.9
1877.1
1879.8
1882.5
1889.2
1884.9
1887.1
1885
1889.5
1887.5
1887.4
1889.7
1889.9
1900
1906.7
1902.5
1904.7
1900
1904.5
1902.5
1900
1902.2
1900
750
817
773
795
799
844
825
849
871
898
925
992
949
971
950
995
975
974
997
999
1100
1167
1125
1147
1100
1145
1125
1100
1122
1100
1945
1951.7
1947.3
1949.5
1949.9
1954.4
1952.5
1954.9
1957.1
1959.8
1962.5
1969.2
1964.9
1967.1
1965
1969.5
1967.5
1967.4
1969.7
1969.9
1980
1986.7
1982.5
1984.7
1980
1984.5
1982.5
1980
1982.2
1980
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.3
44
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for operating band 3
Table 4.3.1.1.3-1: Test frequencies for E-UTRA channel bandwidth for operating band 3
Test Frequency
ID
Bandwidth
NUL
Frequency of
NDL
Frequency of
[MHz]
Uplink [MHz]
Downlink [MHz]
1.4
19207
1710.7
1207
1805.7
3
19215
1711.5
1215
1806.5
5
19225
1712.5
1225
1807.5
Low Range
10
19250
1715
1250
1810
15 [1]
19275
1717.5
1275
1812.5
20 [1]
19300
1720
1300
1815
Mid Range
1.4/3/5/10
19575
1747.5
1575
1842.5
15 [1]/20 [1]
1.4
19943
1784.3
1943
1879.3
3
19935
1783.5
1935
1878.5
5
19925
1782.5
1925
1877.5
High Range
10
19900
1780
1900
1875
15 [1]
19875
1777.5
1875
1872.5
20 [1]
19850
1775
1850
1870
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
4.3.1.1.3A
FDD reference test frequencies for CA in operating band 3
Table 4.3.1.1.3A-1: Test frequencies for CA_3C
Rang
e
Low
CC-Combo
/
NRB_agg
[RB]
25+100
50+100
75+100
Mid
100+100
25+100
50+100
75+100
High
100+100
25+100
50+100
75+100
100+100
Note 1:
CC1
Note1
BW
[RB]
NUL
fUL
[MHz]
NDL
fDL
[MHz]
BW
[RB]
NUL
CC2
Note1
fUL
[MHz]
25
100
50
100
75
100
100
25
100
50
100
75
100
100
25
100
50
100
75
100
100
19233
19300
19255
19300
19278
19300
19300
19483
19550
19481
19526
19478
19501
19476
19733
19800
19706
19751
19679
19701
19652
1713.3
1720
1715.5
1720
1717.8
1720
1720
1738.3
1745
1738.1
1742.6
1737.8
1740.1
1737.6
1763.3
1770
1760.6
1765.1
1757.9
1760.1
1755.2
1233
1300
1255
1300
1278
1300
1300
1483
1550
1481
1526
1478
1501
1476
1733
1800
1706
1751
1679
1701
1652
1808.3
1815
1810.5
1815
1812.8
1815
1815
1833.3
1840
1833.1
1837.6
1832.8
1835.1
1832.6
1858.3
1865
1855.6
1860.1
1852.9
1855.1
1850.2
100
25
100
50
100
75
100
100
25
100
50
100
75
100
100
25
100
50
100
75
100
19350
19417
19399
19444
19449
19471
19498
19600
19667
19625
19670
19649
19672
19674
19850
19917
19850
19895
19850
19872
19850
1725
1731.7
1729.9
1734.4
1734.9
1737.1
1739.8
1750.0
1756.7
1752.5
1757.0
1754.9
1757.2
1757.4
1775
1781.7
1775
1779.5
1775
1777.2
1775
Carriers in increasing frequency order.
ETSI
NDL
fDL
[MHz]
1350
1417
1399
1444
1449
1471
1498
1600
1667
1625
1670
1649
1672
1674
1850
1917
1850
1895
1850
1872
1850
1820
1826.7
1824.9
1829.4
1829.9
1832.1
1834.8
1845.0
1851.7
1847.5
1852.0
1849.9
1852.2
1852.4
1870
1876.7
1870
1874.5
1870
1872.2
1870
3GPP TS 36.508 version 15.5.0 Release 15
45
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.1.3A-2: Test frequencies for CA_3A-3A
Test
Frequency
ID
CCCombo
/
NRB_agg
[RB]
CC1
Note1
BW
fUL
fDL
[RB]
NUL
[MHz]
NDL
[MHz]
15
19215 1711.5
1215
1806.5
Max WGap
15+25
25
19225 1712.5
1225
1807.5
25
19225 1712.5
1225
1807.5
25+25
25
19225 1712.5
1225
1807.5
25+50
50
19250
1715
1250
1810
25
19225 1712.5
1225
1807.5
25+75
75
19275 1717.5
1275
1812.5
50
19250
1715
1250
1810
50+50
19225 1712.5
1225
1807.5
25+100
25
100
19300
1720
1300
1815
50
19250
1715
1250
1810
50+75
75
19275 1717.5
1275
1812.5
50
19250
1715
1250
1810
50+100
100
19300
1720
1300
1815
75
19275 1717.5
1275
1812.5
75+75
75
19275 1717.5
1275
1812.5
75+100
100
19300
1720
1300
1815
100
19300
1720
1300
1815
100+100
25
19575 1747.5
1575
1842.5
Refsens2
25+100
50
19600
1750
1600
1845
50 + 100
Note 1: Carriers in increasing frequency order.
Note 2: Test point derived with regard to REFSENS requirements.
Wgap
[MHz]
BW
[RB]
25
15
25
50
25
75
25
50
100
25
75
50
100
50
75
100
75
100
100
100
67
67
65
60
60
55
55
55
50
50
50
50
45
45
45
40
40
35
15
10
NUL
19925
19935
19925
19900
19925
19875
19925
19900
19850
19925
19875
19900
19850
19900
19875
19850
19875
19850
19850
19850
CC2
Note1
fUL
[MHz]
1782.5
1783.5
1782.5
1780
1782.5
1777.5
1782.5
1780
1775
1782.5
1777.5
1780
1775
1780
1777.5
1775
1777.5
1775
1775
1775
NDL
1925
1935
1925
1900
1925
1875
1925
1900
1850
1925
1875
1900
1850
1900
1875
1850
1875
1850
1850
1850
Table 4.3.1.1.3A-3: Test frequencies for CA_3B
CC-Combo
/
NRB_agg
[RB]
Rang
e
Low
15+25
Mid
25+25
15+25
High
25+25
15+25
CC1
Note1
BW
[RB]
NUL
fUL
[MHz]
NDL
fDL
[MHz]
BW
[RB]
NUL
CC2
Note1
fUL
[MHz]
15
25
25
15
25
25
15
25
25
19216
19225
19225
19551
19560
19551
19886
19895
19877
1711.6
1712.5
1712.5
1745.1
1746.0
1745.1
1778.6
1779.5
1777.7
1216
1225
1225
1551
1560
1551
1886
1895
1877
1806.6
1807.5
1807.5
1840.1
1841.0
1840.1
1873.6
1874.5
1872.7
25
15
25
25
15
25
25
15
25
19255
19264
19273
19590
19599
19599
19925
19934
19925
1715.5
1716.4
1717.3
1749.0
1749.9
1749.9
1782.5
1783.4
1782.5
25+25
Note 1:
NDL
fDL
[MHz]
1255
1264
1273
1590
1599
1599
1925
1934
1925
1810.5
1811.4
1812.3
1844.0
1844.9
1844.9
1877.5
1878.4
1877.5
Carriers in increasing frequency order.
4.3.1.1.4
FDD reference test frequencies for operating band 4
Table 4.3.1.1.4-1: Test frequencies for E-UTRA channel bandwidth for operating band 4
Test Frequency ID
Low Range
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
1.4
3
5
19957
19965
19975
1710.7
1711.5
1712.5
1957
1965
1975
ETSI
Frequency of
Downlink
[MHz]
2110.7
2111.5
2112.5
fDL
[MHz]
1877.5
1878.5
1877.5
1875
1877.5
1872.5
1877.5
1875
1870
1877.5
1872.5
1875
1870
1875
1872.5
1870
1872.5
1870
1870
1870
3GPP TS 36.508 version 15.5.0 Release 15
Mid Range
High Range
4.3.1.1.4A
10
15
20
1.4/3/5/10/15/20
1.4
3
5
10
15
20
46
20000
20025
20050
20175
20393
20385
20375
20350
20325
20300
ETSI TS 136 508 V15.5.0 (2019-07)
1715
1717.5
1720
1732.5
1754.3
1753.5
1752.5
1750
1747.5
1745
2000
2025
2050
2175
2393
2385
2375
2350
2325
2300
2115
2117.5
2120
2132.5
2154.3
2153.5
2152.5
2150
2147.5
2145
FDD reference test frequencies for CA in operating band 4
Table 4.3.1.1.4A-1: Test frequencies for CA_4A-4A
Test
Frequency
ID
CC-Combo /
NRB_agg
[RB]
CC1
Note1
BW
fUL
[RB]
NUL
[MHz]
25+25
25
20125 1727.5
50+50
50
20100
1725
Low WGap
50+100
50
20095 1724.5
100+100
100
20050
1720
25
19975 1712.5
25+25
25
19975 1712.5
25+50
50
20000
1715
25
19975 1712.5
25+75
75
20025 1717.5
50
20000
1715
50+50
19975 1712.5
25+100
25
100
20050
1720
Max WGap
50
20000
1715
50+75
75
20025 1717.5
50
20000
1715
50+100
100
20050
1720
75
20025 1717.5
75+75
75
20025 1717.5
75+100
100
20050
1720
100
20050
1720
100+100
Note 1: Carriers in increasing frequency order.
Wgap
[MHz]
NDL
2125
2100
2095
2050
1975
1975
2000
1975
2025
2000
1975
2050
2000
2025
2000
2050
2025
2025
2050
2050
ETSI
fDL
[MHz]
2127.5
2125
2124.5
2120
2112.5
2112.5
2115
2112.5
2117.5
2115
2112.5
2120
2115
2117.5
2115
2120
2117.5
2117.5
2120
2120
5
5
5
5
35
30
30
25
25
25
20
20
20
20
15
15
15
10
10
5
BW
[RB]
25
50
100
100
25
50
25
75
25
50
100
25
75
50
100
50
75
100
75
100
NUL
20225
20250
20255
20300
20375
20350
20375
20325
20375
20350
20300
20375
20325
20350
20300
20350
20325
20300
20325
20300
CC2
Note1
fUL
[MHz]
1737.5
1740
1740.5
1745
1752.5
1750
1752.5
1747.5
1752.5
1750
1745
1752.5
1747.5
1750
1745
1750
1747.5
1745
1747.5
1745
NDL
2225
2250
2255
2300
2375
2350
2375
2325
2375
2350
2300
2375
2325
2350
2300
2350
2325
2300
2325
2300
f
[M
213
21
214
21
215
21
215
214
215
21
21
215
214
21
21
21
214
21
214
21
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.5
47
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for operating band 5
Table 4.3.1.1.5-1: Test frequencies for E-UTRA channel bandwidth for operating band 5
Test Frequency ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
Frequency of
Downlink
[MHz]
869.7
870.5
871.5
874
1.4
20407
824.7
2407
3
20415
825.5
2415
Low Range
5
20425
826.5
2425
10 [1]
20450
829
2450
1.4/3/5
20525
836.5
2525
881.5
Mid Range
10 [1]
1.4
20643
848.3
2643
893.3
3
20635
847.5
2635
892.5
High Range
5
20625
846.5
2625
891.5
10 [1]
20600
844
2600
889
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
4.3.1.1.5A
FDD reference test frequencies for CA in operating band 5
Table 4.3.1.1.5A-1: Test frequencies for CA_5B
Range
Low
Mid
High
Note 1:
CC-Combo /
NRB_agg
[RB]
CC1
Note1
BW
NUL
fUL
[RB]
[MHz]
15+25
15
20416
825.6
25
20425
826.5
25+50
25
20428
826.8
50+25
50
20450
829
50+50
50
20450
829
15+25
15
20501
834.1
25
20510
835.0
25+50
25
20478
831.8
50+25
50
20500
834
50+50
50
20476
831.6
15+25
15
20586
842.6
25
20595
843.5
25+50
25
20528
836.8
50+25
50
20550
839
50+50
50
20501
834.1
Carriers in increasing frequency order.
NDL
2416
2425
2428
2450
2450
2501
2510
2478
2500
2476
2586
2595
2528
2550
2501
fDL
[MHz]
870.6
871.5
871.8
874
874
879.1
880.0
876.8
879
876.6
887.6
888.5
881.8
884
879.1
BW
[RB]
25
15
50
25
50
25
15
50
25
50
25
15
50
25
50
NUL
20455
20464
20500
20522
20549
20540
20549
20550
20572
20575
20625
20634
20600
20622
20600
CC2
Note1
fUL
[MHz]
829.5
830.4
834
836.2
838.9
838.0
838.9
839
841.2
841.5
846.5
847.4
844
846.2
844
NDL
2455
2464
2500
2522
2549
2540
2549
2550
2572
2575
2625
2634
2600
2622
2600
fDL
[MHz]
874.5
875.4
879
881.2
883.9
883.0
883.9
884
886.2
886.5
891.5
892.4
889
891.2
889
Table 4.3.1.1.5A-2: Test frequencies for CA_5A-5A
Test
Frequency
ID
CCCombo /
NRB_agg
[RB]
CC1
Note1
BW
fUL
[RB]
NUL
[MHz]
25
20425
826.5
25+25
25
20425
826.5
25+50
Max WGap
50
20450
829
50
20450
829
50+50
Note 1: Carriers in increasing frequency order.
Wgap
[MHz]
NDL
2425
2425
2450
2450
ETSI
fDL
[MHz]
871.5
871.5
874
874
15
10
10
5
BW
[RB]
25
50
25
50
NUL
20625
20600
20625
20600
CC2
Note1
fUL
[MHz]
846.5
844
846.5
844
NDL
2625
2600
2625
2600
fDL
[MHz]
891.5
889
891.5
889
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.6
48
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for operating band 6
Table 4.3.1.1.6-1: Test frequencies for E-UTRA channel bandwidth for operating band 6
Test Frequency ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
Frequency of
Downlink
[MHz]
Low Range
5
20675
832.5
2675
877.5
10 [1]
20700
835
2700
880
5
20700
835
2700
880
Mid Range
10 [1]
High Range
5
20725
837.5
2725
882.5
10 [1]
20700
835
2700
880
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
NOTE:
4.3.1.1.7
For Band VI testing, the Mobile Country Code shall be set to (MCC = '442/443').
FDD reference test frequencies for operating band 7
Table 4.3.1.1.7-1: Test frequencies for E-UTRA channel bandwidth for operating band 7
Test Frequency ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
Frequency of
Downlink
[MHz]
2622.5
2625
2627.5
2630
5
20775
2502.5
2775
10
20800
2505
2800
Low Range
15
20825
2507.5
2825
20 [1]
20850
2510
2850
5/10/15
21100
2535
3100
2655
Mid Range
20 [1]
5
21425
2567.5
3425
2687.5
10
21400
2565
3400
2685
High Range
15
21375
2562.5
3375
2682.5
20 [1]
21350
2560
3350
2680
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.7A
49
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for CA in operating band 7
Table 4.3.1.1.7A-1: Test frequencies for CA_7C
Range
Low
CC-Combo /
NRB_agg
[RB]
50+100
75+50
75+75
75+100
Mid
100+100
50+100
75+50
75+75
75+100
High
100+100
50+100
75+50
75+75
75+100
100+100
Note 1:
BW
[RB]
NUL
CC1
Note1
fUL
[MHz]
50
100
75
75
75
100
100
50
100
75
75
75
100
100
50
100
75
75
75
100
100
20805
20850
20825
20825
20828
20850
20850
21006
21051
21051
21025
21003
21026
21001
21206
21251
21277
21225
21179
21201
21152
2505.5
2510
2507.5
2507.5
2507.8
2510
2510
2525.6
2530.1
2530.1
2527.5
2525.3
2527.6
2525.1
2545.6
2550.1
2552.7
2547.5
2542.9
2545.1
2540.2
NDL
fDL
[MHz]
BW
[RB]
2805
2850
2825
2825
2828
2850
2850
3006
3051
3051
3025
3003
3026
3001
3206
3251
3277
3225
3179
3201
3152
2625.5
2630
2627.5
2627.5
2627.8
2630
2630
2645.6
2650.1
2650.1
2647.5
2645.3
2647.6
2645.1
2665.6
2670.1
2672.7
2667.5
2662.9
2665.1
2660.2
100
50
50
75
100
75
100
100
50
50
75
100
75
100
100
50
50
75
100
75
100
NUL
CC2
Note1
fUL
[MHz]
NDL
fDL
[MHz]
20949
20994
20945
20975
20999
21021
21048
21150
21195
21171
21175
21174
21197
21199
21350
21395
21397
21375
21350
21372
21350
2519.9
2524.4
2519.5
2522.5
2524.9
2527.1
2529.8
2540
2544.5
2542.1
2542.5
2542.4
2544.7
2544.9
2560
2564.5
2564.7
2562.5
2560
2562.2
2560
2949
2994
2945
2975
2999
3021
3048
3150
3195
3171
3175
3174
3197
3199
3350
3395
3397
3375
3350
3372
3350
2639.9
2644.4
2639.5
2642.5
2644.9
2647.1
2649.8
2660
2664.5
2662.1
2662.5
2662.4
2664.7
2664.9
2680
2684.5
2684.7
2682.5
2680
2682.2
2680
Carriers in increasing frequency order.
Table 4.3.1.1.7A-2 : Test frequencies for CA_7B
Range
Low
Mid
High
Note 1:
CCCombo
/
NRB_agg
[RB]
CC1
Note1
BW
fUL
[RB]
NUL
[MHz]
75+25
75
20825
2507.5
75+25
75
21076
2532.6
75+25
75
21327
2557.7
Carriers in increasing frequency order
NDL
2825
3076
3327
ETSI
fDL
[MHz]
2627.5
2652.6
2677.7
BW
[RB]
25
25
25
NUL
20918
21169
21420
CC2
Note1
fUL
[MHz]
2516.8
2541.9
2567.0
NDL
2918
3169
3420
fDL
[MHz]
2636.8
2661.9
2687.0
3GPP TS 36.508 version 15.5.0 Release 15
50
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.1.7A-2: Test frequencies for CA_7A-7A
Test
Frequency
ID
CC-Combo /
NRB_agg
[RB]
CC1
Note1
fUL
[MHz]
2502.5
2502.5
2505
2502.5
2507.5
2505
2502.5
2510
2505
2507.5
2505
2510
2507.5
2507.5
2510
2510
2527.5
2525
2522.5
2527.5
2525
2535
Wgap
[MHz]
BW
[RB]
NUL
NDL
25
20775
2775
25+25
25
20775
2775
25+50
50
20800
2800
25
20775
2775
25+75
75
20825
2825
50
20800
2800
50+50
25
20775
2775
25+100
100
20850
2850
Max WGap
50
20800
2800
50+75
75
20825
2825
50
20800
2800
50+100
100
20850
2850
75
20825
2825
75+75
20825
2825
75+100
75
100
20850
2850
100
20850
2850
100+100
75
21025
3025
75+100
100
21000
3000
100+100
25
20975
2975
25+100
Refsens2
25
21025
3025
25+50
50
21000
3000
50+100
100
21100
3100
Note 1: Carriers in increasing frequency order.
Note 2: Test point derived with regard to REFSENS requirements.
4.3.1.1.8
fDL
[MHz]
2622.5
2622.5
2625
2622.5
2627.5
2625
2622.5
2630
2625
2627.5
2625
2630
2627.5
2627.5
2630
2630
2647.5
2645
2642.5
2647.5
2645
2655
60
55
55
50
50
50
45
45
45
45
40
40
40
35
35
30
15
15
25
30
20
15
BW
[RB]
25
50
25
75
25
50
100
25
75
50
100
50
75
100
75
100
100
100
100
50
100
50
NUL
21425
21400
21425
21375
21425
21400
21350
21425
21375
21400
21350
21400
21375
21350
21375
21350
21350
21350
21350
21400
21350
21400
CC2
Note1
fUL
[MHz]
2567.5
2565
2567.5
2562.5
2567.5
2565
2560
2567.5
2562.5
2565
2560
2565
2562.5
2560
2562.5
2560
2560
2560
2560
2565
2560
2565
FDD reference test frequencies for operating band 8
Table 4.3.1.1.8-1: Test frequencies for E-UTRA channel bandwidth for operating band 8
Test Frequency ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
Frequency of
Downlink
[MHz]
925.7
926.5
927.5
930
1.4
21457
880.7
3457
3
21465
881.5
3465
Low Range
5
21475
882.5
3475
10 [1]
21500
885
3500
1.4/3/5
21625
897.5
3625
942.5
Mid Range
10 [1]
1.4
21793
914.3
3793
959.3
3
21785
913.5
3785
958.5
High Range
5
21775
912.5
3775
957.5
10 [1]
21750
910
3750
955
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
ETSI
NDL
3425
3400
3425
3375
3425
3400
3350
3425
3375
3400
3350
3400
3375
3350
3375
3350
3350
3350
3350
3400
3350
3400
fDL
[MHz]
2687.5
2685
2687.5
2682.5
2687.5
2685
2680
2687.5
2682.5
2685
2680
2685
2682.5
2680
2682.5
2680
2680
2680
2680
2685
2680
2685
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.8A
51
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for CA in operating band 8
Table 4.3.1.1. 8 A-1: Test frequencies for CA_8B
Range
CC-Combo /
NRB_agg
[RB]
CC1
Note1
BW
NUL
fUL
[RB]
[MHz]
25+50
25
21478
882.8
50+25
50
21500
885
50+50
50
21500
885
25+50
25
21578
892.8
50+25
50
21600
895.0
50+50
50
21576
892.6
25+50
25
21678
902.8
50+25
50
21700
905
50+50
50
21651
900.1
Carriers in increasing frequency order.
Low
Mid
High
Note 1:
4.3.1.1.9
NDL
3478
3500
3500
3578
3600
3576
3678
3700
3651
fDL
[MHz]
927.8
930
930
937.8
940.0
937.6
947.8
950
945.1
BW
[RB]
50
25
50
50
25
50
50
25
50
NUL
21550
21572
21599
21650
21672
21675
21750
21772
21750
CC2
Note1
fUL
[MHz]
890
892.2
894.9
900.0
902.2
902.5
910
912.2
910
NDL
3550
3572
3599
3650
3672
3675
3750
3772
3750
FDD reference test frequencies for operating band 9
Table 4.3.1.1.9-1: Test frequencies for E-UTRA channel bandwidth for operating band 9
Test Frequency ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
Frequency of
Downlink
[MHz]
1847.4
1849.9
1852.4
1854.9
5
21825
1752.4
3825
10
21850
1754.9
3850
Low Range
15 [1]
21875
1757.4
3875
20 [1]
21900
1759.9
3900
5/10
21975
1767.4
3975
1862.4
Mid Range
15 [1]/20 [1]
5
22125
1782.4
4125
1877.4
10
22100
1779.9
4100
1874.9
High Range
15 [1]
22075
1777.4
4075
1872.4
20 [1]
22050
1774.9
4050
1869.9
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
4.3.1.1.10
FDD reference test frequencies for operating band 10
Table 4.3.1.1.10-1: Test frequencies for E-UTRA channel bandwidth for operating band 10
Test Frequency
ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
NUL
22175
22200
22225
22250
22450
22725
22700
22675
22650
ETSI
Frequency of
Uplink [MHz]
1712.5
1715
1717.5
1720
1740
1767.5
1765
1762.5
1760
NDL
4175
4200
4225
4250
4450
4725
4700
4675
4650
Frequency of
Downlink [MHz]
2112.5
2115
2117.5
2120
2140
2167.5
2165
2162.5
2160
fDL
[MHz]
935
937.2
939.9
945.0
947.2
947.5
955
957.2
955
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.11
52
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for operating band 11
Table 4.3.1.1.11-1: Test frequencies for E-UTRA channel bandwidth for operating band 11
Test Frequency
ID
Low Range
Bandwidth
NUL
Frequency of
NDL
Frequency of
[MHz]
Uplink [MHz]
Downlink [MHz]
5
22775
1430.4
4775
1478.4
10 [1]
22800
1432.9
4800
1480.9
5 / 10 [1]
Mid Range
22850
1437.9
4850
1485.9
High Range
5
22925
1445.4
4925
1493.4
10 [1]
22900
1442.9
4900
1490.9
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
4.3.1.1.12
FDD reference test frequencies for operating band 12
Table 4.3.1.1.12-1: Test frequencies for E-UTRA channel bandwidth for operating band 12
Test Frequency ID
Bandwidth
NUL
Frequency of
NDL
Frequency of
[MHz]
Uplink [MHz]
Downlink [MHz]
1.4
23017
699.7
5017
729.7
3
23025
700.5
5025
730.5
Low Range
5 [1]
23035
701.5
5035
731.5
10 [1]
23060
704
5060
734
Mid Range
1.4/3
23095
707.5
5095
737.5
5 [1]/10 [1]
1.4
23173
715.3
5173
745.3
3
23165
714.5
5165
744.5
High Range
5 [1]
23155
713.5
5155
743.5
10 [1]
23130
711
5130
741
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
4.3.1.1.12A
FDD reference test frequencies for CA in operating band 12
Table 4.3.1.1.12A-1: Test frequencies for CA_12B
Range
Low
Mid
High
Note 1:
CCCombo
/
NRB_agg
[RB]
25+25
25+50
25+25
25+50
25+25
25+50
BW
[RB]
NUL
CC1
Note1
fUL
[MHz]
25
25
25
25
25
25
23035
23038
23071
23048
23107
23058
701.5
701.8
705.1
702.8
708.7
703.8
NDL
fDL
[MHz]
BW
[RB]
5035
5038
5071
5048
5107
5058
731.5
731.8
735.1
732.8
738.7
733.8
25
50
25
50
25
50
Carriers in increasing frequency order.
ETSI
NUL
CC2
Note1
fUL
[MHz]
NDL
fDL
[MHz]
23083
23110
23119
23120
23155
23130
706.3
709
709.9
710
713.5
711
5083
5110
5119
5120
5155
5130
736.3
739
739.9
740
743.5
741
3GPP TS 36.508 version 15.5.0 Release 15
53
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.1.12A-2: Test frequencies for CA_12A-12A
Test
Frequency
ID
CC-Combo /
NRB_agg
[RB]
BW
[RB]
NUL
25
23035
Max WGap
25+25
Note 1: Carriers in increasing frequency order.
4.3.1.1.13
CC1
Note1
fUL
[MHz]
701.5
Wgap
[MHz]
NDL
5035
fDL
[MHz]
731.5
7
BW
[RB]
25
NUL
23155
CC2
Note1
fUL
[MHz]
713.5
FDD reference test frequencies for operating band 13
Table 4.3.1.1.13-1: Test frequencies for E-UTRA channel bandwidth for operating band 13
Test Frequency ID
Bandwidth
NUL
Frequency of
NDL
Frequency of
[MHz]
Uplink [MHz]
Downlink [MHz]
5 [1]
23205
779.5
5205
748.5
Low Range
10 [1]
23230
782
5230
751
5 [1]/10 [1]
Mid Range
23230
782
5230
751
5 [1]
23255
784.5
5255
753.5
High Range
10 [1]
23230
782
5230
751
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
4.3.1.1.14
FDD reference test frequencies for operating band 14
Table 4.3.1.1.14-1: Test frequencies for E-UTRA channel bandwidth for operating band 14
Test Frequency ID
Bandwidth
NUL
Frequency of
NDL
Frequency of
[MHz]
Uplink [MHz]
Downlink [MHz]
5 [1]
23305
790.5
5305
760.5
Low Range
10 [1]
23330
793
5330
763
5 [1]/10 [1]
Mid Range
23330
793
5330
763
5 [1]
23355
795.5
5355
765.5
High Range
10 [1]
23330
793
5330
763
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement (TS
36.101 [27] Clause 7.3) is allowed.
4.3.1.1.15
FDD reference test frequencies for operating band 15
[FFS; not yet specified in TS 36.101]
4.3.1.1.16
FDD reference test frequencies for operating band 16
[FFS; not yet specified in TS 36.101]
4.3.1.1.17
FDD reference test frequencies for operating band 17
Table 4.3.1.1.17-1: Test frequencies for E-UTRA channel bandwidth for operating band 17
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
5 [1]
10 [1]
[1]
5 /10 [1]
5 [1]
10 [1]
NUL
23755
23780
23790
23825
23800
Frequency of
Uplink [MHz]
706.5
709
710
713.5
711
ETSI
NDL
5755
5780
5790
5825
5800
Frequency of
Downlink [MHz]
736.5
739
740
743.5
741
NDL
5155
fDL
[MHz]
743.5
3GPP TS 36.508 version 15.5.0 Release 15
54
ETSI TS 136 508 V15.5.0 (2019-07)
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
4.3.1.1.18
FDD reference test frequencies for operating band 18
Table 4.3.1.1.18-1: Test frequencies for E-UTRA channel bandwidth for operating band 18
Test Frequency ID
Bandwidth
NUL
Frequency of
NDL
Frequency of
[MHz]
Uplink [MHz]
Downlink [MHz]
5
23875
817.5
5875
862.5
10 [1]
Low Range
23900
820
5900
865
15 [1]
23925
822.5
5925
867.5
5/10 [1]/15 [1]
Mid Range
23925
822.5
5925
867.5
5
23975
827.5
5975
872.5
10 [1]
High range
23950
825
5950
870
15 [1]
23925
822.5
5925
867.5
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
4.3.1.1.19
FDD reference test frequencies for operating band 19
Table 4.3.1.1.19-1: Test frequencies for E-UTRA channel bandwidth for operating band 19
Test Frequency ID
Bandwidth
NUL
Frequency of
NDL
Frequency of
[MHz]
Uplink [MHz]
Downlink [MHz]
5
24025
832.5
6025
877.5
10 [1]
Low Range
24050
835
6050
880
15 [1]
24075
837.5
6075
882.5
5/10 [1]/15 [1]
Mid Range
24075
837.5
6075
882.5
5
24125
842.5
6125
887.5
10 [1]
High range
24100
840
6100
885
15 [1]
24075
837.5
6075
882.5
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
4.3.1.1.20
FDD reference test frequencies for operating band 20
Table 4.3.1.1.20-1: Test frequencies for E-UTRA channel bandwidth for operating band 20
Test Frequency ID
Bandwidth
NUL
Frequency of
NDL
Frequency of
[MHz]
Uplink [MHz]
Downlink [MHz]
5
24175
834.5
6175
793.5
10[1]
24200
837
6200
796
Low Range
15[1]
24225
839.5
6225
798.5
20[1]
24250
842
6250
801
5/10[1]/15[1]/20[1]
Mid Range
24300
847
6300
806
5
24425
859.5
6425
818.5
10[1]
24400
857
6400
816
High range
15[1]
24375
854.5
6375
813.5
20[1]
24350
852
6350
811
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.21
55
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for operating band 21
Table 4.3.1.1.21-1: Test frequencies for E-UTRA channel bandwidth for operating band 21
Test Frequency ID
Bandwidth
NUL
Frequency of
NDL
Frequency of
[MHz]
Uplink [MHz]
Downlink [MHz]
5
24475
1450.4
6475
1498.4
10 [1]
Low Range
24500
1452.9
6500
1500.9
15 [1]
24525
1455.4
6525
1503.4
5/10 [1]/15 [1]
Mid Range
24525
1455.4
6525
1503.4
5
24575
1460.4
6575
1508.4
10 [1]
High range
24550
1457.9
6550
1505.9
15 [1]
24525
1455.4
6525
1503.4
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
4.3.1.1.22
FDD reference test frequencies for operating band 22
Table 4.3.1.1.22-1: Test frequencies for E-UTRA channel bandwidth for operating band 22
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.1.23
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
NUL
24625
24650
24675
24700
25000
25375
25350
25325
25300
Frequency of
Uplink [MHz]
3412.5
3415
3417.5
3420
3450
3487.5
3485
3482.5
3480
NDL
6625
6650
6675
6700
7000
7375
7350
7325
7300
Frequency of
Downlink [MHz]
3512.5
3515
3517.5
3520
3550
3587.5
3585
3582.5
3580
FDD reference test frequencies for operating band 23
Table 4.3.1.1.23-1: Test frequencies for E-UTRA channel bandwidth for operating band 23
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
1.4
3
5
10
15
20
1.4/3
5 /10 / 15 / 20
1.4
3
5
10
15
20
25507
25515
25525
25550
25575
25600
2000.7
2001.5
2002.5
2005
2007.5
2010
7507
7515
7525
7550
7575
7600
Frequency of
Downlink
[MHz]
2180.7
2181.5
2182.5
2185
2187.5
2190
25600
2010
7600
2190
25693
25685
25675
25650
25625
25600
2019.3
2018.5
2017.5
2015
2012.5
2010
7693
7685
7675
7650
7625
7600
2199.3
2198.5
2197.5
2195
2192.5
2190
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.23A
56
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for CA in operating band 23
Table 4.3.1.1.23A-1: Test frequencies for CA_23A-23A
CCComb
o/
NRB_agg
[RB]
Test
Frequenc
y ID
CC1
Note1
BW
[RB]
Max
WGap
Note 1:
CC2
Note
1
Wgap
[MHz]
fUL
NUL
[MHz]
NDL
25525 2002.
7525
25+50
25
5
Carriers in increasing frequency order.
fDL
[MHz]
2182.
5
BW
[RB]
NUL
2565
0
5
50
fUL
[MHz]
2015
NDL
765
0
fDL
[MHz
]
2195
Table 4.3.1.1.23A-2: Test frequencies for CA_23B
CC-Combo /
NRB_agg
[RB]
Range
Low/Mid/High
Note 1:
25+75
50+50
BW
[RB]
NUL
CC1
Note1
fUL
[MHz]
25
50
25531
25551
2003.1
2005.1
NDL
fDL
[MHz]
BW
[RB]
7531
7551
2183.1
2185.1
75
50
NUL
CC2
Note1
fUL
[MHz]
NDL
fDL
[MHz]
25624
25650
2012.4
2015
7624
7650
2192.4
2195
Carriers in increasing frequency order.
4.3.1.1.24
FDD reference test frequencies for operating band 24
Table 4.3.1.1.24-1: Test frequencies for E-UTRA channel bandwidth for operating band 24
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.1.25
Bandwidth
[MHz]
5
10
5/10
5
10
NUL
Frequency of
Uplink [MHz]
1629
1631.5
1643.5
1658
1655.5
25725
25750
25870
26015
25990
NDL
7725
7750
7870
8015
7990
Frequency of
Downlink [MHz]
1527.5
1530
1542
1556.5
1554
FDD reference test frequencies for operating band 25
Table 4.3.1.1.25-1: Test frequencies for E-UTRA channel bandwidth for operating band 25
Test Frequency
ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
1.4
3
5
10
15 [1]
20 [1]
1.4/3/5/10
15 [1]/20 [1]
1.4
3
5
10
15 [1]
20 [1]
26047
26055
26065
26090
26115
26140
1850.7
1851.5
1852.5
1855
1857.5
1860
8047
8055
8065
8090
8115
8140
Frequency of
Downlink
[MHz]
1930.7
1931.5
1932.5
1935
1937.5
1940
26365
1882,5
8365
1962.5
26683
26675
26665
26640
26615
26590
1914.3
1913.5
1912.5
1910
1907.5
1905
8683
8675
8665
8640
8615
8590
1994.3
1993.5
1992.5
1990
1987.5
1985
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
57
ETSI TS 136 508 V15.5.0 (2019-07)
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
4.3.1.1.25A
FDD reference test frequencies for CA in operating band 25
Table 4.3.1.1.25A-1: Test frequencies for CA_25A-25A
Test
Frequenc
y ID
CCCombo
/
NRB_agg
[RB]
CC1
Note1
50
50
50
25
1935
45
50
40
100
8140
1932.
5
1940
40
25
1855
8090
1935
40
75
8115
50
8090
1937.
5
1935
40
26090
1857.
5
1855
35
100
100
26140
1860
8140
1940
35
50
75
26115
8115
75
26115
30
100
100
26140
8140
1937.
5
1937.
5
1940
35
75
1857.
5
1857.
5
1860
30
75
100
26140
1860
8140
1940
25
100
25
26415
8415
50
26440
1967.
5
1970
15
50
1887.
5
1890
10
50
25+50
25
26065
50
26090
50
26090
25
26065
100
50+75
50+100
75+75
75+100
100+10
0
25+50
Refsens2
50+50
Note 1:
Note 2:
55
25+25
NUL
26065
fUL
[MHz]
1852.
5
1852.
5
1855
25+100
CC2
Note
1
BW
[RB
]
25
BW
[RB]
25
50+50
Max
WGap
Wga
p
[MHz
]
8090
fDL
[MHz]
1932.
5
1932.
5
1935
1855
8090
8065
26140
1852.
5
1860
50
26090
75
26115
50
NDL
8065
8065
8115
8440
NUL
2666
5
2664
0
2666
5
2664
0
2659
0
2666
5
2661
5
2664
0
2659
0
2664
0
2661
5
2659
0
2661
5
2659
0
2664
0
2664
0
fUL
[MHz]
1912.
5
1910
1912.
5
1910
1905
1912.
5
1907.
5
1910
1905
1910
1907.
5
1905
1907.
5
1905
1910
1910
NDL
866
5
864
0
866
5
864
0
859
0
866
5
861
5
864
0
859
0
864
0
861
5
859
0
861
5
859
0
864
0
864
0
fDL
[MHz]
1992.
5
1990
1992.
5
1990
1985
1992.
5
1987.
5
1990
1985
1990
1987.
5
1985
1987.
5
1985
1990
1990
Carriers in increasing frequency order.
Test point derived with regard to REFSENS requirements.
4.3.1.1.26
FDD reference test frequencies for operating band 26
Table 4.3.1.1.26-1: Test frequencies for E-UTRA channel bandwidth for operating band 26
Test Frequency
ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
Low Range
1.4
3
5
10[1]
15 [1]
26697
26705
26715
26740
26765
814.7
815.5
816.5
819
821.5
8697
8705
8715
8740
8765
ETSI
Frequency of
Downlink
[MHz]
859.7
860.5
861.5
864
866.5
3GPP TS 36.508 version 15.5.0 Release 15
58
ETSI TS 136 508 V15.5.0 (2019-07)
1.4/3/5/10[1]
26865
831.5
8865
876.5
15 [1]
1.4
27033
848.3
9033
893.3
3
27025
847.5
9025
892.5
High Range
5
27015
846.5
9015
891.5
10[1]
26990
844
8990
889
15 [1]
26965
841.5
8965
886.5
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
Mid Range
4.3.1.1.27
FDD reference test frequencies for operating band 27
Table 4.3.1.1.27-1: Test frequencies for E-UTRA channel bandwidth for operating band 27
Test Frequency ID
Frequency of
Downlink
[MHz]
1.4
27047
807.7
9047
852.7
3
27055
808.5
9055
853.5
Low Range
5
27065
809.5
9065
854.5
10 [1]
27090
812
9090
857
1.4/3/5/10 [1]
Mid Range
27125
815.5
9125
860.5
1.4
27203
823.3
9203
868.3
3
27195
822.5
9195
867.5
High Range
5
27185
821.5
9185
866.5
10 [1]
27160
819
9160
864
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
4.3.1.1.27A
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
FDD reference test frequencies for CA in operating band 27
Table 4.3.1.1.27A-1: Test frequencies for CA_27B
Range
Low
Mid
High
Note 1:
CC-Combo /
NRB_agg
[RB]
CC1
Note1
BW
NUL
fUL
[RB]
[MHz]
6
27048
807.8
6+25
15
27056
808.6
15+25
25
27065
809.5
25+25
6
27051
808.1
6+50
15
27059
808.9
15+50
6
27101
813.1
6+25
15
27101
813.1
15+25
25
27101
813.1
25+25
6
27080
811.0
6+50
15
27079
810.9
15+50
6
27155
818.5
6+25
15
27146
817.6
15+25
25
27137
816.7
25+25
6
27109
813.9
6+50
15
27100
813.0
15+50
Carriers in increasing frequency order.
NDL
9048
9056
9065
9051
9059
9101
9101
9101
9080
9079
9155
9146
9137
9109
9100
ETSI
fDL
[MHz]
852.8
853.6
854.5
853.1
853.9
858.1
858.1
858.1
856.0
855.9
863.5
862.6
861.7
858.9
858.0
BW
[RB]
25
25
25
50
50
25
25
25
50
50
25
25
25
50
50
NUL
27078
27095
27113
27102
27119
27131
27140
27149
27131
27139
27185
27185
27185
27160
27160
CC2
Note
1
fUL
[MHz]
810.8
812.5
814.3
813.2
814.9
816.1
817.0
817.9
816.1
816.9
821.5
821.5
821.5
819.0
819.0
NDL
9078
9095
9113
9102
9119
9131
9140
9149
9131
9139
9185
9185
9185
9160
9160
fDL
[MHz]
855.8
857.5
859.3
858.2
859.9
861.1
862.0
862.9
861.1
861.9
866.5
866.5
866.5
864.0
864.0
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.28
59
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for operating band 28
Table 4.3.1.1.28-1: Test frequencies for E-UTRA channel bandwidth for operating band 28
Test
Frequency ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
Frequency of
Downlink
[MHz]
3
27225
704.5
9225
759.5
5
27235
705.5
9235
760.5
Low Range
10[1]
27260
708
9260
763
15[1]
27285
710.5
9285
765.5
20[1]
27310
713
9310
768
3
27375
719.5
9375
774.5
5
27385
720.5
9385
775.5
Mid Range
10[1]
27410
723
9410
778
15[1]
27435
725.5
9435
780.5
20[1,2]
27460
728
9460
783
3
27645
746.5
9645
801.5
5
27635
745.5
9635
800.5
High Range
10[1]
27610
743
9610
798
15[1]
27585
740.5
9585
795.5
20[1]
27560
738
9560
793
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
NOTE 2: Mid Range for 20 MHz moved due to note 2 in Table 5.6.1-1 of TS 36.101 [27].
NOTE 3: For CA_18A-28A and CA_1A-18A-28A use test frequencies in Table 4.3.1.1.28-2.
NOTE 4: For CA_19A-28A and CA_1A-19A-28A use test frequencies in Table 4.3.1.1.28-3.
Table 4.3.1.1.28-2: Test frequencies for E-UTRA channel bandwidth for operating band 28 in CA_18A28A and CA_1A-18A-28A
Test
Frequency ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
Frequency of
Downlink
[MHz]
5
27235
705.5
9235
760.5
Low Range
10[1]
27260
708
9260
763
Mid Range
5/10[1]
27360
718
9360
773
5
27485
730.5
9485
785.5
High Range
10[1]
27460
728
9460
783
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
Table 4.3.1.1.28-3: Test frequencies for E-UTRA channel bandwidth for operating band 28 in CA_19A28A and CA_1A-19A-28A
Test
Frequency ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
Frequency of
Downlink
[MHz]
5
27385
720.5
9385
775.5
Low Range
101
27410
723
9410
778
Mid Range
5/101
27510
733
9510
788
5
27635
745.5
9635
800.5
High Range
101
27610
743
9610
798
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
ETSI
NDL
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.29
60
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for CA in operating band 29
Table 4.3.1.1.29-1: Test frequencies for E-UTRA channel bandwidth for operating band 29
Test Frequency ID
Low Range
Bandwidth
[MHz]
3
5
10
NUL
Frequency of
Uplink [MHz]
NA
NA
NA
NA[1]
NA[1]
NA[1]
NDL
9675
9685
9710
Frequency of
Downlink [MHz]
718.5
719.5
722
3
NA[1]
NA
9715
722.5
5 /10
3
NA[1]
NA
9755
726.5
High Range
5
NA[1]
NA
9745
725.5
10
NA[1]
NA
9720
723
NOTE 1: Restricted to E-UTRA operation when carrier aggregation is configured. The downlink operating
band is paired with the uplink operating band (external) of the carrier aggregation configuration
that is supporting the configured Pcell.
Mid Range
4.3.1.1.30
FDD reference test frequencies for operating band 30
Table 4.3.1.1.30-1: Test frequencies for E-UTRA channel bandwidth for operating band 30
Test Frequency ID
Bandwidth
NUL
Frequency of
[MHz]
Uplink [MHz]
5
27685
2307.5
Low Range
10
27710
2310
Mid Range
5/10
27710
2310
5
27735
2312.5
High Range
10
27710
2310
Note 1: The uplink transmission is not allowed at this band for the UE with the externally vehiclemounted antennas.
4.3.1.1.31
NDL
9795
9820
9820
9845
9820
Frequency of
Downlink [MHz]
2352.5
2355
2355
2357.5
2355
FDD reference test frequencies for operating band 31
Table 4.3.1.1.31-1: Test frequencies for E-UTRA channel bandwidth for operating band 31
Test Frequency ID
Frequency of
Downlink
[MHz]
1.4
27767
453.2
9877
463.2
Low Range
3[1]
27775
454
9885
464
5[1]
27785
455
9895
465
Mid Range
1.4/3[1]/ 5[1]
27785
455
9895
465
1.4
27803
456.8
9913
466.8
High Range
3[1]
27795
456
9905
466
5[1]
27785
455
9895
465
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
4.3.1.1.32
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
FDD reference test frequencies for CA in operating band 32
Table 4.3.1.1.32-1: Test frequencies for E-UTRA channel bandwidth for operating band 32
Test Frequency ID
Low Range
Bandwidth
[MHz]
5
10
15
20
NUL
NA[1]
NA[1]
NA[1]
NA[1]
Frequency of
Uplink [MHz]
NA
NA
NA
NA
ETSI
NDL
9945
9970
9995
10020
Frequency of
Downlink [MHz]
1454.5
1457
1459.5
1462
3GPP TS 36.508 version 15.5.0 Release 15
61
ETSI TS 136 508 V15.5.0 (2019-07)
5/10/15/20
NA[1]
NA
10140
1474
NA
10335
1493.5
5
NA[1]
10
NA[1]
NA
10310
1491
High Range
15
NA[1]
NA
10285
1488.5
20
NA[1]
NA
10260
1486
NOTE 1: Restricted to E-UTRA operation when carrier aggregation is configured. The downlink operating
band is paired with the uplink operating band (external) of the carrier aggregation configuration
that is supporting the configured Pcell.
Mid Range
4.3.1.1.33 to 4.3.1.1.64 Void
Note:
Sub-clauses 4.3.1.1.33 to 4.3.1.1.64 are marked as void as bands 33 to 64 are TDD bands. TDD bands are
specified in sub-clause 4.3.1.2.
4.3.1.1.65
FDD reference test frequencies for operating band 65
Table 4.3.1.1.65-1: Test frequencies for E-UTRA channel bandwidth for operating band 65
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
1.4
3
5
10
15
20
1.4/3/5/10/15/20
1.4
3
5
10
15
20
NUL
131079
131087
131097
131122
131147
131172
131522
131965
131957
131947
131922
131897
131872
ETSI
Frequency of
Uplink [MHz]
1920.7
1921.5
1922.5
1925
1927.5
1930
1965
2009.3
2008.5
2007.5
2005
2002.5
2000
NDL
65543
65551
65561
65586
65611
65636
65986
66429
66421
66411
66386
66361
66336
Frequency of
Downlink [MHz]
2110.7
2111.5
2112.5
2115
2117.5
2120
2155
2199.3
2198.5
2197.5
2195
2192.5
2190
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.66
62
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for operating band 66
Table 4.3.1.1.66-1: Test frequencies for E-UTRA channel bandwidth for operating band 66
Test Frequency
ID
Bandwidth
NUL
Frequency of
[MHz]
Uplink [MHz]
1.4
131979
1710.7
3
131987
1711.5
5
131997
1712.5
Low Range
10
132022
1715
15
132047
1717.5
20
132072
1720
Mid Range Tx1
1.4/3/5/10/15/20
132322
1745
Mid Range
1.4/3/5/10/15/20
132422
1755
1.4
132665
1779.3
3
132657
1778.5
5
132647
1777.5
Paired High
Range2
10
132622
1775
15
132597
1772.5
20
132572
1770
1.4
NA
NA
3
NA
NA
5
NA
NA
High Range3
10
NA
NA
15
NA
NA
20
NA
NA
Note 1: Applicable for transmitter testing.
Note 2: Applicable if UL is configured on the CC.
Note 3: Applicable if no UL is configured on the CC.
ETSI
NDL
66443
66451
66461
66486
66511
66536
66786
66886
67129
67121
67111
67086
67061
67036
67329
67321
67311
67286
67261
67236
Frequency of
Downlink [MHz]
2110.7
2111.5
2112.5
2115
2117.5
2120
2145
2155
2179.3
2178.5
2177.5
2175
2172.5
2170
2199.3
2198.5
2197.5
2195
2192.5
2190
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.66A
63
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for CA in operating band 66
Table 4.3.1.1.66A-1: Test frequencies for CA_66B
Range
CC-Combo /
NRB_agg
[RB]
25+25
25+50
Low
25+75
50+50
25+25
25+50
Mid
25+75
50+50
25+25
25+50
High2
25+75
50+50
25+25
25+50
High3
25+75
50+50
Note 1:
Note 2:
Note 3:
BW
[RB]
NUL
CC1
Note1
fUL
[MHz]
25
25
50
25
75
50
25
25
50
25
75
50
25
25
50
25
75
50
25
25
50
25
75
50
131997
132000
132022
132002
132047
132022
132398
132375
132397
132353
132398
132373
132647
132647
132622
132647
132597
132622
132599
132550
132572
132504
132549
132523
1712.5
1712.8
1715
1713
1717.5
1715
1752.6
1750.3
1752.5
1748.1
1752.6
1750.1
1777.5
1777.5
1775
1777.5
1772.5
1775
1772.7
1767.8
1770
1763.2
1767.7
1765.1
NDL
fDL
[MHz]
BW
[RB]
66461
66464
66486
66466
66511
66486
66862
66839
66861
66817
66862
66837
67111
67111
67086
67111
67061
67086
67063
67014
67036
66968
67013
66987
2112.5
2112.8
2115
2113
2117.5
2115
2152.6
2150.3
2152.5
2148.1
2152.6
2150.1
2177.5
2177.5
2175
2177.5
2172.5
2175
2172.7
2167.8
2170
2163.2
2167.7
2165.1
25
50
25
75
25
50
25
50
25
75
25
50
25
50
25
75
25
50
25
50
25
75
25
50
NUL
132045
132072
132094
132095
132140
132121
132446
132447
132469
132446
132491
132472
NA
NA
NA
NA
NA
NA
132647
132622
132644
132597
132642
132622
Carriers in increasing frequency order.
Applicable for intra-band contiguous CA without UL CA.
Applicable for intra-band contiguous CA with UL CA.
ETSI
CC2
Note1
fUL
[MHz]
NDL
fDL
[MHz]
1717.3
1720
1722.2
1722.3
1726.8
1724.9
1757.4
1757.5
1759.7
1757.4
1761.9
1760
NA
NA
NA
NA
NA
NA
1777.5
1775.
1777.2
1772.5
1777
1775
66509
66536
66558
66559
66604
66585
66910
66911
66933
66910
66955
66936
67159
67183
67158
67204
67154
67185
67111
67086
67108
67061
67106
67086
2117.3
2120
2122.2
2122.3
2126.8
2124.9
2157.4
2157.5
2159.7
2157.4
2161.9
2160
2182.3
2184.7
2182.2
2186.8
2181.8
2184.9
2177.5
2175
2177.2
2172.5
2177
2175
3GPP TS 36.508 version 15.5.0 Release 15
64
Table 4.3.1.1.66A-2: Test frequencies for CA_66C
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
Range
CC-Combo /
NRB_agg
[RB]
50+75
50+100
Low
75+75
75+100
100+25
100+100
50+75
50+100
75+75
75+100
Mid
100+25
100+100
50+75
50+100
2
High
75+75
75+100
100+25
100+100
50+75
50+100
3
High
75+75
75+100
100+25
65
ETSI TS 136 508 V15.5.0 (2019-07)
BW
[RB]
NUL
CC1
Note1
fUL
[MHz]
50
75
50
100
75
75
100
100
25
132025
132047
132027
132072
132047
132050
132072
132072
132005
1715.3
1717.5
1715.5
1720
1717.5
1717.8
1720
1720
1713.3
66489
66511
66491
66536
66511
66514
66536
66536
66469
2115.3
2117.5
2115.5
2120
2117.5
2117.8
2120
2120
2113.3
75
50
100
50
75
100
75
25
100
132145
132167
132171
132216
132197
132221
132243
132189
132122
1727.3
1729.5
1729.9
1734.4
1732.5
1734.9
1737.1
1731.7
1725.0
66609
66631
66635
66680
66661
66685
66707
66653
66586
2127.3
2129.5
2129.9
2134.4
2132.5
2134.9
2137.1
2131.7
2125.0
100
50
75
50
100
75
75
100
100
25
100
50
75
50
100
75
75
100
100
25
100
50
75
50
100
75
75
100
100
132072
132351
132373
132328
132373
132347
132325
132348
132397
132330
132323
132622
132597
132622
132572
132597
132597
132572
132572
132647
132572
132477
132499
132428
132473
132447
132401
132423
132522
1720
1747.9
1750.1
1745.6
1750.1
1747.5
1745.3
1747.6
1752.5
1745.8
1745.1
66536
66815
66837
66792
66837
66811
66789
66812
66861
66794
66787
67086
67061
67086
67036
67061
67061
67036
67036
67111
67036
66941
66963
66892
66937
66911
66885
66887
66986
2120
2147.9
2150.1
2145.6
2150.1
2147.5
2145.3
2147.6
2152.5
2145.8
2145.1
2175
2172.5
2175
2170
2172.5
2172.5
2170
2170
2177.5
2170
2160.5
2162.7
2155.6
2160.1
2157.5
2152.9
2155.1
2165
100
75
50
100
50
75
100
75
25
100
100
75
50
100
50
75
100
75
25
100
100
75
50
100
50
75
100
75
25
132270
132471
132493
132472
132517
132497
132496
132519
132514
132447
132521
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
132597
132619
132572
132617
132597
132572
132594
132639
1739.8
1759.9
1762.1
1760
1764.5
1762.5
1762.4
1764.7
1764.2
1757.5
1764.9
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
1772.5
1774.7
1770
1774.5
1772.5
1770
1772.2
1776.7
66734
66935
66957
66936
66981
66961
66960
66983
66978
66911
66985
67206
67181
67230
67180
67211
67232
67207
67153
67228
67234
67061
67083
67036
67081
67061
67036
67058
67103
2139.8
2159.9
2162.1
2160
2164.5
2162.5
2162.4
2164.7
2164.2
2157.5
2164.9
2187
2184.5
2189.4
2184.4
2187.5
2189.6
2187.1
2181.7
2189.2
2189.8
2172.5
2174.7
2170
2174.5
2172.5
2170
2172.2
2176.7
1775
1772.5
1775
1770
1772.5
1772.5
1770
1770
1777.5
1770
1760.5
1762.7
1755.6
1760.1
1757.5
1752.9
1755.1
1765
NDL
fDL
[MHz]
BW
[RB]
ETSI
NUL
CC2
Note1
fUL
[MHz]
NDL
fDL
[MHz]
3GPP TS 36.508 version 15.5.0 Release 15
100+100
Note 1:
Note 2:
Note 3:
25
100
132455
132374
66
1758.3
1750.2
66919
66838
2158.3
2150.2
100
100
ETSI TS 136 508 V15.5.0 (2019-07)
132572
132572
Carriers in increasing frequency order.
Applicable for intra-band contiguous CA without UL CA.
Applicable for intra-band contiguous CA with UL CA.
ETSI
1770.0
1770
67036
67036
2170.0
2170
3GPP TS 36.508 version 15.5.0 Release 15
67
Table 4.3.1.1.66A-3: Test frequencies for CA_66A-66A
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
Test
Frequency
ID
Low
WGap2
CCCombo
/
NRB_agg
[RB]
25+25
50+50
50+100
100+100
25+25
25+50
25+75
50+50
25+100
Max
WGap2
50+75
50+100
75+75
75+100
100+100
25+25
25+50
25+75
Max
WGap3
50+50
25+100
50+75
50+100
75+75
75+100
BW
[RB]
25
50
50
100
25
25
50
25
75
50
25
100
50
75
50
100
75
75
100
100
25
25
50
25
75
50
25
100
50
75
50
100
75
75
100
NUL
20125
20100
20095
20050
131997
131997
132022
131997
132047
132022
131997
132072
132022
132047
132022
132072
132047
132047
132072
132072
131997
131997
132022
131997
132047
132022
131997
132072
132022
132047
132022
132072
132047
132047
132072
68
CC1
Note1
fUL
[MHz]
1727.5
1725
1724.5
1720
1712.5
1712.5
1715
1712.5
1717.5
1715
1712.5
1720
1715
1717.5
1715
1720
1717.5
1717.5
1720
1720
1712.5
1712.5
1715
1712.5
1717.5
1715
1712.5
1720
1715
1717.5
1715
1720
1717.5
1717.5
1720
ETSI TS 136 508 V15.5.0 (2019-07)
Wgap
[MHz]
NDL
2125
2100
2095
2050
66461
66461
66486
66461
66511
66486
66461
66536
66486
66511
66486
66536
66511
66511
66536
66536
66461
66461
66486
66461
66511
66486
66461
66536
66486
66511
66486
66536
66511
66511
66536
fDL
[MHz]
2127.5
2125
2124.5
2120
2112.5
2112.5
2115
2112.5
2117.5
2115
2112.5
2120
2115
2117.5
2115
2120
2117.5
2117.5
2120
2120
2112.5
2112.5
2115
2112.5
2117.5
2115
2112.5
2120
2115
2117.5
2115
2120
2117.5
2117.5
2120
5
5
5
5
80
75
75
70
70
70
65
65
65
65
60
60
60
55
55
50
60
55
55
50
50
50
45
45
45
45
40
40
40
35
35
BW
[RB]
25
50
100
100
25
50
25
75
25
50
100
25
75
50
100
50
75
100
75
100
25
50
25
75
25
50
100
25
75
50
100
50
75
100
75
ETSI
NUL
CC2
Note1
fUL
[MHz]
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
132647
132622
132647
132597
132647
132622
132572
132647
132597
132622
132572
132622
132597
132572
132597
1777.5
1775
1777.5
1772.5
1777.5
1775
1770
1777.5
1772.5
1775
1770
1775
1772.5
1770
1772.5
NDL
2225
2250
2255
2300
67311
67286
67311
67261
67311
67286
67236
67311
67261
67286
67236
67286
67261
67236
67261
67236
67111
67086
67111
67061
67111
67086
67036
67111
67061
67086
67036
67086
67061
67036
67061
fDL
[MHz]
2137.5
2140
2140.5
2145
2197.5
2195
2197.5
2192.5
2197.5
2195
2190
2197.5
2192.5
2195
2190
2195
2192.5
2190
2192.5
2190
2177.5
2175
2177.5
2172.5
2177.5
2175
2170
2177.5
2172.5
2175
2170
2175
2172.5
2170
2172.5
3GPP TS 36.508 version 15.5.0 Release 15
Note 1:
Note 2:
Note 3:
100+100
100
132072
1720
66536
2120
Carriers in increasing frequency order.
Applicable for intra-band non-contiguous CA without UL CA.
Applicable for intra-band non-contiguous CA with UL CA.
69
30
100
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
132572
1770
67036
2170
3GPP TS 36.508 version 15.5.0 Release 15
70
Table 4.3.1.1.66A-4: Test frequencies for CA_66D
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
Range
CC-Combo /
NRB_agg
[RB]
25+100+100
50+75+100
Low
75+75+75
75+75+100
50+100+100
75+100+100
100+100+100
25+100+100
50+75+100
Mid
75+75+75
75+75+100
50+100+100
75+100+100
BW
[RB]
25
100
100
50
50
75
75
100
100
75
75
75
100
50
100
100
75
100
100
100
25
100
100
50
50
75
75
100
100
75
75
75
100
50
100
100
75
NUL
132005
132072
132072
132027
132027
132050
132050
132072
132072
132047
132050
132050
132072
132027
132072
132072
132050
132072
132072
132072
132231
132305
132298
132254
132253
132279
132276
132301
132299
132272
132250
132251
132273
132229
132278
132274
132226
71
CC1
Note1
fUL
[MHz]
1713.3
1720.0
1720.0
1715.5
1715.5
1717.8
1717.8
1720.0
1720.0
1717.5
1717.8
1717.8
1720.0
1715.5
1720.0
1720.0
1717.8
1720.0
1720.0
1720.0
1735.9
1743.3
1742.6
1738.2
1738.1
1740.7
1740.4
1742.9
1742.7
1740.0
1737.8
1737.9
1740.1
1735.7
1740.6
1740.2
1735.4
NDL
66469
66536
66536
66491
66491
66514
66514
66536
66536
66511
66514
66514
66536
66491
66536
66536
66514
66536
66536
66536
66695
66769
66762
66718
66717
66743
66740
66765
66763
66736
66714
66715
66737
66693
66742
66738
66690
fDL
[MHz]
2113.3
2120.0
2120.0
2115.5
2115.5
2117.8
2117.8
2120.0
2120.0
2117.5
2117.8
2117.8
2120.0
2115.5
2120.0
2120.0
2117.8
2120.0
2120.0
2120.0
2135.9
2143.3
2142.6
2138.2
2138.1
2140.7
2140.4
2142.9
2142.7
2140.0
2137.8
2137.9
2140.1
2135.7
2140.6
2140.2
2135.4
BW
[RB]
100
25
100
75
100
50
100
50
75
75
75
100
75
100
50
100
100
75
100
100
100
25
100
75
100
50
100
50
75
75
75
100
75
100
50
100
100
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
NUL
132122
132189
132270
132147
132171
132170
132221
132216
132243
132197
132200
132221
132243
132171
132216
132270
132221
132243
132270
132270
132348
132422
132496
132374
132397
132399
132447
132445
132470
132422
132400
132422
132444
132373
132422
132472
132397
CC2
Note1
fUL
[MHz]
1725.0
1731.7
1739.8
1727.5
1729.9
1729.8
1734.9
1734.4
1737.1
1732.5
1732.8
1734.9
1737.1
1729.9
1734.4
1739.8
1734.9
1737.1
1739.8
1739.8
1747.6
1755.0
1762.4
1750.2
1752.5
1752.7
1757.5
1757.3
1759.8
1755.0
1752.8
1755.0
1757.2
1750.1
1755.0
1760.0
1752.5
NDL
66586
66653
66734
66611
66635
66634
66685
66680
66707
66661
66664
66685
66707
66635
66680
66734
66685
66707
66734
66734
66812
66886
66960
66838
66861
66863
66911
66909
66934
66886
66864
66886
66908
66837
66886
66936
66861
fDL
[MHz]
2125.0
2131.7
2139.8
2127.5
2129.9
2129.8
2134.9
2134.4
2137.1
2132.5
2132.8
2134.9
2137.1
2129.9
2134.4
2139.8
2134.9
2137.1
2139.8
2139.8
2147.6
2155.0
2162.4
2150.2
2152.5
2152.7
2157.5
2157.3
2159.8
2155.0
2152.8
2155.0
2157.2
2150.1
2155.0
2160.0
2152.5
BW
[RB]
100
100
25
100
75
100
50
75
50
75
100
75
75
100
100
50
100
100
75
100
100
100
25
100
75
100
50
75
50
75
100
75
75
100
100
50
100
NUL
132320
132306
132387
132318
132342
132314
132365
132336
132363
132347
132371
132392
132393
132369
132360
132414
132419
132414
132441
132468
132546
132539
132613
132545
132568
132543
132591
132565
132590
132572
132571
132593
132594
132571
132566
132616
CC3
Note1
fUL
[MHz]
1744.8
1743.4
1751.5
1744.6
1747.0
1744.2
1749.3
1746.4
1749.1
1747.5
1749.9
1752.0
1752.1
1749.7
1748.8
1754.2
1754.7
1754.2
1756.9
1759.6
1767.4
1766.7
1774.1
1767.3
1769.6
1767.1
1771.9
1769.3
1771.8
1770.0
1769.9
1772.1
1772.2
1769.9
1769.4
1774.4
NA
NA
NDL
66784
66770
66851
66782
66806
66778
66829
66800
66827
66811
66835
66856
66857
66833
66824
66878
66883
66878
66905
66932
67010
67003
67077
67009
67032
67007
67055
67029
67054
67036
67035
67057
67058
67035
67030
67080
67059
fDL
[MHz]
2144.8
2143.4
2151.5
2144.6
2147.0
2144.2
2149.3
2146.4
2149.1
2147.5
2149.9
2152.0
2152.1
2149.7
2148.8
2154.2
2154.7
2154.2
2156.9
2159.6
2167.4
2166.7
2174.1
2167.3
2169.6
2167.1
2171.9
2169.3
2171.8
2170.0
2169.9
2172.1
2172.2
2169.9
2169.4
2174.4
2172.3
3GPP TS 36.508 version 15.5.0 Release 15
High
Note 1:
100
132251
1737.9
100
132249
1737.7
100
132224
1735.2
100+100+100
25
132457
1758.5
25+100+100
100
132538
1766.6
100
132524
1765.2
50
132481
1760.9
50+75+100
50
132479
1760.7
75
132508
1763.6
75
132502
1763.0
100
132530
1765.8
100
132526
1765.4
75
132497
1762.5
75+75+75
75
132451
1757.9
75+75+100
75
132452
1758.0
100
132473
1760.1
50
132430
1755.8
50+100+100
100
132484
1761.2
100
132475
1760.3
75
132403
1753.1
75+100+100
100
132430
1755.8
100
132425
1755.3
100
132376
1750.4
100+100+100
Carriers in increasing frequency order.
72
66715
66713
66688
66921
67002
66988
66945
66943
66972
66966
66994
66990
66961
66915
66916
66937
66894
66948
66939
66867
66894
66889
66840
2137.9
2137.7
2135.2
2158.5
2166.6
2165.2
2160.9
2160.7
2163.6
2163.0
2165.8
2165.4
2162.5
2157.9
2158.0
2160.1
2155.8
2161.2
2160.3
2153.1
2155.8
2155.3
2150.4
75
100
100
100
25
100
75
100
50
100
50
75
75
75
100
75
100
50
100
100
75
100
100
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
132422
132447
132422
1755.0
1757.5
1755.0
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
66886
66911
66886
67038
67119
67186
67065
67087
67092
67137
67138
67161
67111
67065
67087
67108
67038
67092
67137
67038
67065
67087
67038
2155.0
2157.5
2155.0
2170.2
2178.3
2185.0
2172.9
2175.1
2175.6
2180.1
2180.2
2182.5
2177.5
2172.9
2175.1
2177.2
2170.2
2175.6
2180.1
2170.2
2172.9
2175.1
2170.2
100
75
100
100
100
25
100
75
100
50
75
50
75
100
75
75
100
100
50
100
100
75
100
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
67057
67082
67084
67236
67236
67303
67236
67258
67236
67281
67258
67281
67261
67236
67258
67258
67236
67236
67281
67236
67236
67258
67236
2172.1
2174.6
2174.8
2190.0
2190.0
2196.7
2190.0
2192.2
2190.0
2194.5
2192.2
2194.5
2192.5
2190.0
2192.2
2192.2
2190.0
2190.0
2194.5
2190.0
2190.0
2192.2
2190.0
3GPP TS 36.508 version 15.5.0 Release 15
73
Table 4.3.1.1.66A-5: Test frequencies for CA_66A-66C
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
Range
CC-Combo
/
CC1
NRB_agg
Note1
74
Wgap
[MHz]
ETSI TS 136 508 V15.5.0 (2019-07)
CC2
CC3
Note1
Note1
[RB]
BW
[RB]
[MHz]
BW
fDL
NDL
[MHz]
[RB]
fUL
NUL
[MHz]
fDL
NDL
[MHz]
BW
[RB]
fUL
NUL
[MHz]
fDL
NDL
[MHz]
25
131997
1712.5
66461
2112.5
60
100
NA
NA
67186
2185
25
NA
NA
67303
25
131997
1712.5
66461
2112.5
60.8
25
NA
NA
67119
2178.3
100
NA
NA
67236
2190
25+50+75
25
131997
1712.5
66461
2112.5
60.5
50
NA
NA
67141
2180.5
75
NA
NA
67261
2192.5
25
131997
1712.5
66461
2112.5
60.2
75
NA
NA
67163
2182.7
50
NA
NA
67283
2194.7
25+50+100
25
131997
1712.5
66461
2112.5
55.6
50
NA
NA
67092
2175.6
100
NA
NA
67236
2190
25
131997
1712.5
66461
2112.5
55.1
100
NA
NA
67137
2180.1
50
NA
NA
67281
2194.5
50
132022
1715
66486
2115
55
100
NA
NA
67186
2185
25
NA
NA
67303
2196.7
50
132022
1715
66486
2115
55.8
25
NA
NA
67119
2178.3
100
NA
NA
67236
2190
55
75
NA
NA
67111
2177.5
75
NA
NA
67261
2192.5
25+25+100
Max
Wgap
fUL
NUL
2196.7
25+75+75
25
131997
1712.5
66461
2112.5
25+75+100
25
131997
1712.5
66461
2112.5
50.4
75
NA
NA
67065
2172.9
100
NA
NA
67236
2190
50.1
100
NA
NA
67087
2175.1
75
NA
NA
67258
2192.2
2196.7
25
131997
1712.5
66461
2112.5
75
132047
1717.5
66511
2117.5
50
100
NA
NA
67186
2185
25
NA
NA
67303
75
132047
1717.5
66511
2117.5
50.8
25
NA
NA
67119
2178.3
100
NA
NA
67236
2190
25+100+100
25
131997
1712.5
66461
2112.5
45.2
100
NA
NA
67038
2170.2
100
NA
NA
67236
2190
25+100+100
100
132072
1720
66536
2120
45
100
NA
NA
67186
2185
25
NA
NA
67303
2196.7
100
132072
1720
66536
2120
45.8
25
NA
NA
67119
2178.3
100
NA
NA
67236
2190
50+50+75
50
132022
1715
66486
2115
55.5
50
NA
NA
67141
2180.5
75
NA
NA
67261
2192.5
50
132022
1715
66486
2115
55.2
75
NA
NA
67163
2182.7
50
NA
NA
67283
2194.7
50+50+100
50
132022
1715
66486
2115
50.6
50
NA
NA
67092
2175.6
100
NA
NA
67236
2190
50.1
100
NA
NA
67137
2180.1
50
NA
NA
67281
2194.5
50+75+75
50+75+100
50+100+100
50
132022
1715
66486
2115
50
132022
1715
66486
2115
50
75
NA
NA
67111
2177.5
75
NA
NA
67261
2192.5
50
NA
NA
67141
2180.5
75
NA
NA
67261
2192.5
75
NA
NA
67163
2182.7
50
NA
NA
67283
2194.7
75
132047
1717.5
66511
2117.5
50.5
75
132047
1717.5
66511
2117.5
50.2
50
132022
1715
66486
2115
45.4
75
NA
NA
67065
2172.9
100
NA
NA
67236
2190
50
132022
1715
66486
2115
45.1
100
NA
NA
67087
2175.1
75
NA
NA
67258
2192.2
75
132047
1717.5
66511
2117.5
45.6
50
NA
NA
67092
2175.6
100
NA
NA
67236
2190
100
132072
1720
66536
2120
45.5
50
NA
NA
67141
2180.5
75
NA
NA
67261
2192.5
100
132072
1720
66536
2120
45.2
75
NA
NA
67163
2182.7
50
NA
NA
67283
2194.7
75
132047
1717.5
66511
2117.5
45.1
100
NA
NA
67137
2180.1
50
NA
NA
67281
2194.5
100
132072
1720
66536
2120
45.5
50
NA
NA
67141
2180.5
75
NA
NA
67261
2192.5
100
132072
1720
66536
2120
45.2
75
NA
NA
67163
2182.7
50
NA
NA
67283
2194.7
2115
40.2
100
NA
NA
67038
2170.2
100
NA
NA
67236
2190
2120
40.6
50
NA
NA
67092
2175.6
100
NA
NA
67236
2190
50
100
132022
132072
1715
1720
66486
66536
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
ETSI TS 136 508 V15.5.0 (2019-07)
100
132072
1720
66536
2120
40.1
100
NA
NA
67137
2180.1
50
NA
NA
67281
2194.5
75+75+75
75
132047
1717.5
66511
2117.5
45
75
NA
NA
67111
2177.5
75
NA
NA
67261
2192.5
75+75+100
75
132047
1717.5
66511
2117.5
40.4
75
NA
NA
67065
2172.9
100
NA
NA
67236
2190
75
132047
1717.5
66511
2117.5
40.1
100
NA
NA
67087
2175.1
75
NA
NA
67258
2192.2
75+100+100
100+100+100
Note 1:
75
100
132072
1720
66536
2120
40
75
NA
NA
67111
2177.5
75
NA
NA
67261
2192.5
75
132047
1717.5
66511
2117.5
35.2
100
NA
NA
67038
2170.2
100
NA
NA
67236
2190
100
132072
1720
66536
2120
35.4
75
NA
NA
67065
2172.9
100
NA
NA
67236
2190
100
132072
1720
66536
2120
35.1
100
NA
NA
67087
2175.1
75
NA
NA
67258
2192.2
100
132072
1720
66536
2120
30.2
100
NA
NA
67038
2170.2
100
NA
NA
67236
2190
Carriers in increasing frequency order.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
76
Table 4.3.1.1.66A-6: Test frequencies for CA_66C-66A
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
Range
CC-Combo
/
CC1
NRB_agg
Note1
77
ETSI TS 136 508 V15.5.0 (2019-07)
CC2
CC3
Wgap
[MHz]
Note1
Note1
[RB]
BW
[RB]
25+25+100
Max
Wgap
fUL
NUL
[MHz]
fDL
NDL
BW
[MHz] [RB]
fUL
NUL
BW
fDL
NDL
[MHz]
[MHz]
[RB]
fUL
NUL
[MHz]
fDL
NDL
[MHz]
100
132072
25
132189
1731.7
66653
2131.7
60.8
25
NA
NA
67311
25
132005 1713.3 66469 2113.3
100
132122
1725
66586
2125
60
25
NA
NA
67311
2197.5
25+50+75
50
132025 1715.3 66489 2115.3
75
132145
1727.3
66609
2127.3
60.2
25
NA
NA
67311
2197.5
75
132047 1717.5 66511 2117.5
50
132167
1729.5
66631
2129.5
60.5
25
NA
NA
67311
2197.5
25+50+100
50
132027 1715.5 66491 2115.5
100
132171
1729.9
66635
2129.9
55.1
25
NA
NA
67311
2197.5
100
132072
1720
66536
2120
50
132216
1734.4
66680
2134.4
55.6
25
NA
NA
67311
2197.5
100
132072
1720
66536
2120
25
132189
1731.7
66653
2131.7
55.8
50
NA
NA
67286
2195
25
132005 1713.3 66469 2113.3
100
132122
1725
66586
2125
55
50
NA
NA
67286
2195
25+75+75
75
132047 1717.5 66511 2117.5
75
132197
1732.5
66661
2132.5
55
25
NA
NA
67311
2197.5
25+75+100
75
132050 1717.8 66514 2117.8
100
132221
1734.9
66685
2134.9
50.1
25
NA
NA
67311
2197.5
100
132072
1720
66536
2120
75
132243
1737.1
66707
2137.1
50.4
25
NA
NA
67311
2197.5
100
132072
1720
66536
2120
25
132189
1731.7
66653
2131.7
50.8
75
NA
NA
67261
2192.5
25
132005 1713.3 66469 2113.3
100
132122
1725
66586
2125
50
75
NA
NA
67261
2192.5
25+100+100
100
132072
1720
66536
2120
100
132270
1739.8
66734
2139.8
45.2
25
NA
NA
67311
2197.5
25+100+100
100
132072
1720
66536
2120
25
132189
1731.7
66653
2131.7
45.8
100
NA
NA
67236
2190
25
132005 1713.3 66469 2113.3
100
132122
1725
66586
2125
45
100
NA
NA
67236
2190
50+50+75
50
132025 1715.3 66489 2115.3
75
132145
1727.3
66609
2127.3
55.2
50
NA
NA
67286
2195
75
132047 1717.5 66511 2117.5
50
132167
1729.5
66631
2129.5
55.5
50
NA
NA
67286
2195
50+50+100
50
132027 1715.5 66491 2115.5
100
132171
1729.9
66635
2129.9
50.1
50
NA
NA
67286
2195
2195
50+75+75
50+75+100
50+100+100
75+75+75
1720
1720
66536
66536
2120
2120
2197.5
100
132072
50
132216
1734.4
66680
2134.4
50.6
50
NA
NA
67286
75
132047 1717.5 66511 2117.5
75
132197
1732.5
66661
2132.5
50
50
NA
NA
67286
2195
50
132025 1715.3 66489 2115.3
75
132145
1727.3
66609
2127.3
50.2
75
NA
NA
67261
2192.5
75
132047 1717.5 66511 2117.5
50
132167
1729.5
66631
2129.5
50.5
75
NA
NA
67261
2192.5
75
132050 1717.8 66514 2117.8
100
132221
1734.9
66685
2134.9
45.1
50
NA
NA
67286
2195
100
132072
75
132243
1737.1
66707
2137.1
45.4
50
NA
NA
67286
2195
50
132027 1715.5 66491 2115.5
100
132171
1729.9
66635
2129.9
45.1
75
NA
NA
67261
2192.5
50
132025 1715.3 66489 2115.3
75
132145
1727.3
66609
2127.3
45.2
100
NA
NA
67236
2190
75
132047 1717.5 66511 2117.5
50
132167
1729.5
66631
2129.5
45.5
100
NA
NA
67236
2190
100
132072
1720
66536
2120
50
132216
1734.4
66680
2134.4
45.6
75
NA
NA
67261
2192.5
100
132072
1720
66536
2120
100
132270
1739.8
66734
2139.8
40.2
50
NA
NA
67286
2195
50
132027 1715.5 66491 2115.5
100
132171
1729.9
66635
2129.9
40.1
100
NA
NA
67236
2190
50
132216
1734.4
66680
2134.4
40.6
100
NA
NA
67236
2190
75
132197
1732.5
66661
2132.5
45
75
NA
NA
67261
2192.5
1720
1720
66536
66536
2120
100
132072
75
132047 1717.5 66511 2117.5
2120
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
75+75+100
75+100+100
100+100+100
Note 1:
78
ETSI TS 136 508 V15.5.0 (2019-07)
75
132050 1717.8 66514 2117.8
100
132221
1734.9
66685
2134.9
40.1
75
NA
NA
67261
2192.5
100
132072
75
132243
1737.1
66707
2137.1
40.4
75
NA
NA
67261
2192.5
75
132047 1717.5 66511 2117.5
75
132197
1732.5
66661
2132.5
40
100
NA
NA
67236
2190
100
132072
100
132270
1739.8
66734
2139.8
35.2
75
NA
NA
67261
2192.5
1720
1720
66536
66536
2120
2120
75
132050 1717.8 66514 2117.8
100
132221
1734.9
66685
2134.9
35.1
100
NA
NA
67236
2190
100
132072
1720
66536
2120
75
132243
1737.1
66707
2137.1
35.4
100
NA
NA
67236
2190
100
132072
1720
66536
2120
100
132270
1739.8
66734
2139.8
30.2
100
NA
NA
67236
2190
Carriers in increasing frequency order.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
79
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.1.66A-7: Test frequencies for CA_66A-66B
Range
CCCombo /
CC1
NRB_agg
Note1
Wgap
[MHz]
CC2
CC3
Note1
Note1
[RB]
BW
[RB]
Max
Wgap
[MHz]
BW
fDL
NDL
[MHz]
[RB]
fUL
NUL
[MHz]
fDL
NDL
[MHz]
BW
[RB]
fUL
NUL
[MHz]
fDL
NDL
[MHz]
25+25+25
25
131997
1712.5
66461
2112.5
75.2
25
NA
NA
67263
2192.7
25
NA
NA
67311
25+25+50
25
131997
1712.5
66461
2112.5
70.3
25
NA
NA
67214
2187.8
50
NA
NA
67286
2195
25
131997
1712.5
66461
2112.5
70
50
NA
NA
67236
2190
25
NA
NA
67308
2197.2
25+25+50
50
132022
1715
66486
2115
70.2
25
NA
NA
67263
2192.7
25
NA
NA
67311
2197.5
25+25+75
25
131997
1712.5
66461
2112.5
65.7
25
NA
NA
67168
2183.2
75
NA
NA
67261
2192.5
25
131997
1712.5
66461
2112.5
65.2
75
NA
NA
67213
2187.7
25
NA
NA
67306
2197
25+25+75
75
132047
1717.5
66511
2117.5
65.2
25
NA
NA
67263
2192.7
25
NA
NA
67311
2197.5
25+25+100
100
132072
1720
66536
2120
60.2
25
NA
NA
67263
2192.7
25
NA
NA
67311
2197.5
25+50+50
25
131997
1712.5
66461
2112.5
65.1
50
NA
NA
67187
2185.1
50
NA
NA
67286
2195
50
132022
1715
66486
2115
65.3
25
NA
NA
67214
2187.8
50
NA
NA
67286
2195
50
132022
1715
66486
2115
65
50
NA
NA
67236
2190
25
NA
NA
67308
2197.2
50
132022
1715
66486
2115
60.7
25
NA
NA
67168
2183.2
75
NA
NA
67261
2192.5
50
132022
1715
66486
2115
60.2
75
NA
NA
67213
2187.7
25
NA
NA
67306
2197
25+50+75
75
132047
1717.5
66511
2117.5
60.3
25
NA
NA
67214
2187.8
50
NA
NA
67286
2195
75
132047
1717.5
66511
2117.5
60
50
NA
NA
67236
2190
25
NA
NA
67308
2197.2
25+50+100
100
132072
1720
66536
2120
55.3
25
NA
NA
67214
2187.8
50
NA
NA
67286
2195
100
132072
1720
66536
2120
55
50
NA
NA
67236
2190
25
NA
NA
67308
2197.2
25+75+75
75
132047
1717.5
66511
2117.5
55.7
25
NA
NA
67168
2183.2
75
NA
NA
67261
2192.5
75
132047
1717.5
66511
2117.5
55.2
75
NA
NA
67213
2187.7
25
NA
NA
67306
2197
25+75+100
100
132072
1720
66536
2120
50.7
25
NA
NA
67168
2183.2
75
NA
NA
67261
2192.5
25+50+75
2197.5
100
132072
1720
66536
2120
50.2
75
NA
NA
67213
2187.7
25
NA
NA
67306
2197
50
132022
1715
66486
2115
60.1
50
NA
NA
67187
2185.1
50
NA
NA
67286
2195
50+50+75
75
132047
1717.5
66511
2117.5
55.1
50
NA
NA
67187
2185.1
50
NA
NA
67286
2195
50+50+100
100
132072
1720
66536
2120
50.1
50
NA
NA
67187
2185.1
50
NA
NA
67286
2195
50+50+50
Note 1:
fUL
NUL
Carriers in increasing frequency order.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
80
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.1.66A-8: Test frequencies for CA_66B-66A
Range
Max
Wgap
CC-Combo
/
NRB_agg
[RB]
CC2
Note1
Note1
CC3
Wgap
[MHz]
Note1
BW
[RB]
NUL
fUL
[MHz]
NDL
fDL
[MHz]
BW
[RB]
NUL
fUL
[MHz]
NDL
fDL
[MHz]
25+25+25
25
131997
1712.5
66461
2112.5
25
132045
1717.3
66509
2117.3
25+25+50
25
132000
1712.8
66464
2112.8
50
132072
1720
66536
2120
70
25
NA
NA
67311
2197.5
50
132022
1715
66486
2115
25
132094
1722.2
66558
2122.2
70.3
25
NA
NA
67311
2197.5
75.2
BW
[RB]
NUL
fUL
[MHz]
NDL
fDL
[MHz]
25
NA
NA
67311
2197.5
25+25+50
25
131997
1712.5
66461
2112.5
25
132045
1717.3
66509
2117.3
70.2
50
NA
NA
67286
2195
25+25+75
25
132002
1713
66466
2113
75
132095
1722.3
66559
2122.3
65.2
25
NA
NA
67311
2197.5
75
132047
1717.5
66511
2117.5
25
132140
1726.8
66604
2126.8
65.7
25
NA
NA
67311
2197.5
25+25+75
25
131997
1712.5
66461
2112.5
25
132045
1717.3
66509
2117.3
65.2
75
NA
NA
67261
2192.5
25+25+100
25
131997
1712.5
66461
2112.5
25
132045
1717.3
66509
2117.3
60.2
100
NA
NA
67236
2190
25+50+50
50
132022
1715
66486
2115
50
132121
1724.9
66585
2124.9
65.1
25
NA
NA
67311
2197.5
25
132000
1712.8
66464
2112.8
50
132072
1720
66536
2120
65
50
NA
NA
67286
2195
50
132022
1715
66486
2115
25
132094
1722.2
66558
2122.2
65.3
50
NA
NA
67286
2195
25+50+75
25
132002
1713
66466
2113
75
132095
1722.3
66559
2122.3
60.2
50
NA
NA
67286
2195
75
132047
1717.5
66511
2117.5
25
132140
1726.8
66604
2126.8
60.7
50
NA
NA
67286
2195
25+50+75
25
132000
1712.8
66464
2112.8
50
132072
1720
66536
2120
60
75
NA
NA
67261
2192.5
50
132022
1715
66486
2115
25
132094
1722.2
66558
2122.2
60.3
75
NA
NA
67261
2192.5
25+50+100
25
132000
1712.8
66464
2112.8
50
132072
1720
66536
2120
55
100
NA
NA
67236
2190
50
132022
1715
66486
2115
25
132094
1722.2
66558
2122.2
55.3
100
NA
NA
67236
2190
25
132002
1713
66466
2113
75
132095
1722.3
66559
2122.3
55.2
75
NA
NA
67261
2192.5
75
132047
1717.5
66511
2117.5
25
132140
1726.8
66604
2126.8
55.7
75
NA
NA
67261
2192.5
25
132002
1713
66466
2113
75
132095
1722.3
66559
2122.3
50.2
100
NA
NA
67236
2190
75
132047
1717.5
66511
2117.5
25
132140
1726.8
66604
2126.8
50.7
100
NA
NA
67236
2190
50+50+50
50
132022
1715
66486
2115
50
132121
1724.9
66585
2124.9
60.1
50
NA
NA
67286
2195
50+50+75
50
132022
1715
66486
2115
50
132121
1724.9
66585
2124.9
55.1
75
NA
NA
67261
2192.5
50+50+100
50
132022
1715
66486
2115
50
132121
1724.9
66585
2124.9
50.1
100
NA
NA
67236
2190
25+75+75
25+75+100
Note 1:
CC1
Carriers in increasing frequency order.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
81
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.9A-10: Test frequencies for CA_41F
Range
Low
Mid
High
Note 1:
4.3.1.1.67
CC-Combo /
NRB_agg
[RB]
50+75+100+100+100
50+100+100+100+100
75+75+100+100+100
75+100+100+100+1100
CC1
Note1
BW
[RB] NUL/DL
50
39705
50
39705
75
39728
75
39728
100 39750
100+100+100+100+100 100 39750
50+75+100+100+100
50
40254
50+100+100+100+100
50
40229
75+75+100+100+100
75
40250
75+100+100+100+1100
75
40226
100 40251
100+100+100+100+100 100 40224
50+75+100+100+100
50
40803
50+100+100+100+100
50
40752
75+75+100+100+100
75
40773
75+100+100+100+1100
75
40725
100 40752
100+100+100+100+100 100 40698
Carriers in increasing frequency order.
CC2
Note1
fUL/DL
[MHz]
2501.5
2501.5
2503.8
2503.8
2506
2506
2556.4
2553.9
2556
2553.6
2556.1
2553.4
2611.3
2606.2
2608.3
2603.5
2606.2
2600.8
BW
[RB]
75
100
75
100
75
100
75
100
75
100
75
100
75
100
75
100
75
100
NUL/DL
39825
39849
39878
39899
39921
39948
40374
40373
40400
40397
40422
40422
40923
40896
40923
40896
40923
40896
CC3
Note1
fUL/DL
[MHz]
2513.5
2515.9
2518.8
2520.9
2523.1
2525.8
2568.4
2568.3
2571
2570.7
2573.2
2573.2
2623.3
2620.6
2623.3
2620.6
2623.3
2620.6
BW
[RB]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
NUL/DL
39996
40047
40049
40097
40092
40146
40545
40571
40571
40595
40593
40620
41094
41094
41094
41094
41094
41094
CC4
Note1
fUL/DL
[MHz]
2530.6
2535.7
2535.9
2540.7
2540.2
2545.6
2585.5
2588.1
2588.1
2590.5
2590.3
2593
2640.4
2640.4
2640.4
2640.4
2640.4
2640.4
BW
[RB]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
NUL/DL
40194
40245
40247
40295
40290
40344
40743
40769
40769
40793
40791
40818
41292
41292
41292
41292
41292
41292
CC5
Note1
fUL/DL
[MHz]
2550.4
2555.5
2555.7
2560.5
2560
2565.4
2605.3
2607.9
2607.9
2610.3
2610.1
2612.8
2660.2
2660.2
2660.2
2660.2
2660.2
2660.2
FDD reference test frequencies for CA in operating band 67
Table 4.3.1.1.67-1: Test frequencies for E-UTRA channel bandwidth for operating band 67
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
5
10
15
5/10/15/20
5
10
15
NUL
NA[1]
NA[1]
NA[1]
NA[1]
NA[1]
NA[1]
NA[1]
Frequency of
Uplink [MHz]
NA
NA
NA
NA
NA
NA
NA
ETSI
NDL
67361
67386
67411
67436
67511
67486
67461
Frequency of
Downlink [MHz]
740.5
743
745.5
748
755.5
753
750.5
BW
[RB]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
NUL/DL
40392
40443
40445
40493
40488
40542
40941
40967
40967
40991
40989
41016
41490
41490
41490
41490
41490
41490
fUL/DL
[MHz]
2570.2
2575.3
2575.5
2580.3
2579.8
2585.2
2625.1
2627.7
2627.7
2630.1
2629.9
2632.6
2680
2680
2680
2680
2680
2680
3GPP TS 36.508 version 15.5.0 Release 15
82
NOTE 1: Restricted to E-UTRA operation when carrier aggregation is configured. The downlink
operating band is paired with the uplink operating band (external) of the carrier aggregation
configuration that is supporting the configured Pcell.
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.68
83
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for operating band 68
Table 4.3.1.1.68-1: Test frequencies for E-UTRA channel bandwidth for operating band 68
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.1.69
Bandwidth
[MHz]
5
10
15
5/10/15
5
10
15
NUL
132697
132722
132747
132822
132947
132922
132897
Frequency of
Uplink [MHz]
700.5
703
705.5
713
725.5
723
720.5
NDL
67561
67586
67611
67686
67811
67786
67761
Frequency of
Downlink [MHz]
755.5
758
760.5
768
780.5
778
775.5
FDD reference test frequencies for operating band 69
Test Frequency ID
Bandwidth
NUL
Frequency of
NDL
Frequency of
[MHz]
Uplink [MHz]
Downlink [MHz]
NA
67861
2572.5
5
NA[1]
10
NA[1]
NA
67886
2575
Low Range
15
NA[1]
NA
67911
2577.5
20
NA[1]
NA
67936
2580
Mid Range
5/10/15/20
NA[1]
NA
68086
2595
NA
68311
2617.5
5
NA[1]
10
NA[1]
NA
68286
2615
High Range
15
NA[1]
NA
68261
2612.5
20
NA[1]
NA
68236
2610
NOTE 1: Restricted to E-UTRA operation when carrier aggregation is configured. The downlink operating
band is paired with the uplink operating band (external) of the carrier aggregation configuration
that is supporting the configured Pcell.
4.3.1.1.70
FDD reference test frequencies for operating band 70
Table 4.3.1.1.70-1: Test frequencies for E-UTRA channel bandwidth for operating band 70
Test Frequency ID
Bandwidth
NUL
Frequency of
[MHz]
Uplink [MHz]
5
132997
1697.5
Low Range
10
133022
1700
15
133047
1702.5
Paired Mid Range1
5/10/15
133047
1702.5
Mid Range2
5/10/15
NA
NA
5
133097
1707.5
Paired High
10
133072
1705
Range1
15
133047
1702.5
5
NA
NA
High Range2
10
NA
NA
15
NA
NA
Note 1: Applicable if UL is configured on the CC.
Note 2: Applicable if no UL is configured on the CC.
ETSI
NDL
68361
68386
68411
68411
68461
68461
68436
68411
68561
68536
68511
Frequency of
Downlink [MHz]
1997.5
2000
2002.5
2002.5
2007.5
2007.5
2005
2002.5
2017.5
2015
2012.5
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.1.70A
84
ETSI TS 136 508 V15.5.0 (2019-07)
FDD reference test frequencies for CA in operating band 70
Table 4.3.1.1.70A-1: Test frequencies for CA_70C
Test
Frequency
ID2
1
23
3
Note 1:
Note 2:
Note 3:
CC-Combo /
NRB_agg
[RB]
CC1
Note1
BW
fUL
fDL
BW
[RB]
NUL
[MHz]
NDL
[MHz]
[RB]
132997 1697.5 68361 1997.5
25+100
25
100
133072
1705
68386
2000
50+75
50
75
133047 1702.5 68411 2002.5
75+50
75
50
Carriers in increasing frequency order.
These reflect the CA operation scenarios defined for CA_70C.
This combination is for 295MHz Tx-Rx separation in CA operation.
4.3.1.1.71
NUL
NA
NA
NA
CC2
Note1
fUL
[MHz]
NA
NA
NA
NDL
68478
68506
68531
FDD reference test frequencies for operating band 71
Table 4.3.1.1.71-1: Test frequencies for E-UTRA channel bandwidth for operating band 71
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.1.72
Bandwidth
[MHz]
5
10
15
20
5/10/15
20
5
10
15
20
NUL
133147
133172
133197
133222
133297
133322
133447
133422
133397
133372
Frequency of
Uplink [MHz]
665.5
668
670.5
673
680.5
683
695.5
693
690.5
688
NDL
68611
68636
68661
68686
68761
68786
68911
68886
68861
68836
Frequency of
Downlink [MHz]
619.5
622
624.5
627
634.5
637
649.5
647
644.5
642
FDD reference test frequencies for operating band 72
Table 4.3.1.1.72-1: Test frequencies for E-UTRA channel bandwidth for operating band 72
Test Frequency ID
Bandwidth
[MHz]
NUL
Frequency of
Downlink
[MHz]
1.4
133479
451.7
68943
461.7
Low Range
3[1]
133487
452.5
68951
462.5
5[1]
133497
453.5
68961
463.5
Mid Range
1.4/3[1]/ 5[1]
133497
453.5
68961
463.5
1.4
133515
455.3
68979
465.3
High Range
3[1]
133507
454.5
68971
464.5
5[1]
133497
453.5
68961
463.5
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement
(TS 36.101 [27] Clause 7.3) is allowed.
ETSI
Frequency of
Uplink [MHz]
NDL
fDL
[MHz]
2009.2
2012
2014.5
3GPP TS 36.508 version 15.5.0 Release 15
85
ETSI TS 136 508 V15.5.0 (2019-07)
4.3.1.1.73
Void
4.3.1.1.74
FDD reference test frequencies for operating band 74
Table 4.3.1.1.74-1: Test frequencies for E-UTRA channel bandwidth for operating band 74
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.2
4.3.1.2.1
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
1.4
3
5
10
15
20
1.4/3/5/10/15/20
1.4
3
5
10
15
20
133579
133587
133597
133622
133647
133672
133787
133995
133987
133977
133952
133927
133902
1427.7
1428.5
1429.5
1432
1434.5
1437
1448.5
1469.3
1468.5
1467.5
1465
1434.5
1460
69043
69051
69061
69086
69111
69136
69251
69459
69451
69441
69416
69391
69366
Frequency of
Downlink
[MHz]
1475.7
1476.5
1477.5
1480
1482.5
1485
1496.5
1517.3
1516.5
1515.5
1513
1510.5
1508
TDD Mode Test frequencies
TDD reference test frequencies for Operating Band 33
Table 4.3.1.2.1-1: Test frequencies for E-UTRA channel bandwidth for operating band 33
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.2.2
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
EARFCN
36025
36050
36075
36100
36100
36175
36150
36125
36100
Frequency (UL and DL)
[MHz]
1902.5
1905
1907.5
1910
1910
1917.5
1915
1912.5
1910
TDD reference test frequencies for Operating Band 34
Table 4.3.1.2.2-1: Test frequencies for E-UTRA channel bandwidth for operating band 34
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
5
10
15
5/10/15
5
10
15
ETSI
EARFCN
36225
36250
36275
36275
36325
36300
36275
Frequency (UL and DL)
[MHz]
2012.5
2015
2017.5
2017.5
2022.5
2020
2017.5
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.2.3
86
ETSI TS 136 508 V15.5.0 (2019-07)
TDD reference test frequencies for Operating Band 35
Table 4.3.1.2.3-1: Test frequencies for E-UTRA channel bandwidth for operating band 35
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.2.4
Bandwidth
[MHz]
1.4
3
5
10
15
20
1.4/3/5/10/15/20
1.4
3
5
10
15
20
EARFCN
[MHz]
36357
36365
36375
36400
36425
36450
36650
36943
36935
36925
36900
36875
36850
Frequency (UL and DL)
[MHz]
1850.7
1851.5
1852.5
1855
1857.5
1860
1880
1909.3
1908.5
1907.5
1905
1902.5
1900
TDD reference test frequencies for Operating Band 36
Table 4.3.1.2.4-1: Test frequencies for E-UTRA channel bandwidth for operating band 36
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.2.5
Bandwidth
[MHz]
1.4
3
5
10
15
20
1.4/3/5/10/15/20
1.4
3
5
10
15
20
EARFCN
[MHz]
36957
36965
36975
37000
37025
37050
37250
37543
37535
37525
37500
37475
37450
Frequency (UL and DL)
[MHz]
1930.7
1931.5
1932.5
1935
1937.5
1940
1960
1989.3
1988.5
1987.5
1985
1982.5
1980
TDD reference test frequencies for Operating Band 37
Table 4.3.1.2.5-1: Test frequencies for E-UTRA channel bandwidth for operating band 37
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
EARFCN
[MHz]
37575
37600
37625
37650
37650
37725
37700
37675
37650
ETSI
Frequency (UL and DL)
[MHz]
1912.5
1915
1917.5
1920
1920
1927.5
1925
1922.5
1920
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.2.6
87
ETSI TS 136 508 V15.5.0 (2019-07)
TDD reference test frequencies for Operating Band 38
Table 4.3.1.2.6-1: Test frequencies for E-UTRA channel bandwidth for operating band 38
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.2.6A
EARFCN
37775
37800
37825
37850
38000
38225
38200
38175
38150
Frequency (UL and DL)
[MHz]
2572.5
2575
2577.5
2580
2595
2617.5
2615
2612.5
2610
TDD reference test frequencies for CA in operating band 38
Table 4.3.1.2.6A-1: Test frequencies for CA_38C
Range
Low
Mid
High
Note 1:
4.3.1.2.7
CCCombo /
NRB_agg
[RB]
CC1
Note1
fUL/DL
[MHz]
2577.5
2580
2587.5
BW
[RB]
75
100
75
NUL/DL
37975
38048
38075
fUL/DL
[MHz]
2592.5
2599.8
2602.5
100+100
100
37901
2585.1
75+75
75
38025
2597.5
100+100
100
37952
2590.2
Carriers in increasing frequency order.
100
75
100
38099
38175
38150
2604.9
2612.5
2610
75+75
100+100
75+75
BW
[RB]
75
100
75
CC2
Note1
NUL/DL
37825
37850
37925
TDD reference test frequencies for Operating Band 39
Table 4.3.1.2.7-1: Test frequencies for E-UTRA channel bandwidth for operating band 39
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
EARFCN
38275
38300
38325
38350
38450
38625
38600
38575
38550
ETSI
Frequency (UL and DL)
[MHz]
1882.5
1885
1887.5
1890
1900
1917.5
1915
1912.5
1910
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.2.7A
88
ETSI TS 136 508 V15.5.0 (2019-07)
TDD reference test frequencies for CA in Operating Band 39
Table 4.3.1.2.7A-1: Test frequencies for CA_39C
Range
Low
Mid
High
Note 1:
4.3.1.2.8
CCCombo /
NRB_agg
[RB]
CC1
Note1
CC2
Note1
BW
[RB]
NUL/DL
25+100
25
38283
38350
100
50+100
50
38305
38350
100
75+100
75
38328
38350
100
25+100
25
38358
100
38425
50+100
50
38356
100
38401
75+100
75
38353
100
38376
38433
25+100
25
100
38500
38406
50+100
50
100
38451
38379
75+100
75
100
38401
Carriers in increasing frequency order.
fUL/DL
[MHz]
1883.3
1890
1885.5
1890
1887.8
1890
1890.8
1897.5
1890.6
1895.1
1890.3
1892.6
1898.3
1905.0
1895.6
1900.1
1892.9
1895.1
BW
[RB]
100
25
100
50
100
75
100
25
100
50
100
75
100
25
100
50
100
75
NUL/DL
38400
38467
38449
38494
38499
38521
38475
38542
38500
38545
38524
38547
38550
38617
38550
38595
38550
38572
fUL/DL
[MHz]
1895.0
1901.7
1899.9
1904.4
1904.9
1907.1
1902.5
1909.2
1905.0
1909.5
1907.4
1909.7
1910
1916.7
1910
1914.5
1910
1912.2
TDD reference test frequencies for Operating Band 40
Table 4.3.1.2.8-1: Test frequencies for E-UTRA channel bandwidth for operating band 40
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
ETSI
EARFCN
38675
38700
38725
38750
39150
39625
39600
39575
39550
Frequency (UL and DL)
[MHz]
2302.5
2305
2307.5
2310
2350
2397.5
2395
2392.5
2390
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.2.8A
89
ETSI TS 136 508 V15.5.0 (2019-07)
TDD reference test frequencies for CA in operating band 40
Table 4.3.1.2.9A-0: Test frequencies for CA_40A-40A
Test
Frequency
ID
CCCombo /
NRB_agg
[RB]
CC1
Note1
CC2
Note1
Wgap
[MHz]
BW
fUL/DL
[RB]
NUL/DL
[MHz]
50
38700
2305
50+50
50+75
50
38700
2305
75
38725
2307.5
50
38700
2305
50+100
100
38750
2310
Max WGap
75+75
75
38725
2307.5
75
38725
2307.5
75+100
100
38750
2310
100
38750
2310
100+100
Note 1: Carriers in increasing frequency order.
80
75
75
70
70
70
65
65
60
BW
[RB]
50
75
50
100
50
75
100
75
100
NUL/DL
39600
39575
39600
39550
39600
39575
39550
39575
39550
fUL/DL
[MHz]
2395
2392.5
2395
2390
2395
2392.5
2390
2392.5
2390
Table 4.3.1.2.8A-1: Test frequencies for CA_40C
Range
Low
Mid
High
Note 1:
CCCombo /
NRB_agg
[RB]
CC1
Note1
BW
[RB]
NUL/DL
50+100
50
38705
38750
100
38725
75+75
75
38728
75+100
75
38750
100
38750
100+100
100
50+100
50
39056
100
39101
39075
75+75
75
39053
75+100
75
39076
100
100+100
100
39051
39406
50+100
50
100
39451
39425
75+75
75
39379
75+100
75
39401
100
39352
100+100
100
Carriers in increasing frequency order.
CC2
Note1
fUL/DL
[MHz]
2305.5
2310
2307.5
2307.8
2310
2310
2340.6
2345.1
2342.5
2340.3
2342.6
2340.1
2375.6
2380.1
2377.5
2372.9
2375.1
2370.2
ETSI
BW
[RB]
100
50
75
100
75
100
100
50
75
100
75
100
100
50
75
100
75
100
NUL/DL
38849
38894
38875
38899
38921
38948
39200
39245
39225
39224
39247
39249
39550
39595
39575
39550
39572
39550
fUL/DL
[MHz]
2319.9
2324.4
2322.5
2324.9
2327.1
2329.8
2355.0
2359.5
2357.5
2357.4
2359.7
2359.9
2390
2394.5
2392.5
2390
2392.2
2390
3GPP TS 36.508 version 15.5.0 Release 15
90
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.8A-2: Test frequencies for CA_40D
Range
Low
Mid
High
Note 1:
CC-Combo /
NRB_agg
[RB]
50+100+100
CC1
Note1
CC2
Note1
BW
fUL/DL
[RB] NUL/DL [MHz]
50
38705 2305.5
100 38750
2310
100 38750
2310
75+100+100
75
38728 2307.8
100 38750
2310
100 38750
2310
100+100+100 100 38750
2310
50+100+100
50
38957 2330.7
100 39006 2335.6
100 39002 2335.2
75+100+100
75
38954 2330.4
100 38979 2332.9
100 38977 2332.7
100+100+100 100 38952 2330.2
50+100+100
50
39208 2355.8
100 39262 2361.2
100 39253 2360.3
75+100+100
75
39181 2353.1
100 39208 2355.8
100 39203 2355.3
100+100+100 100 39154 2350.4
Carriers in increasing frequency order.
BW
[RB]
100
50
100
100
75
100
100
100
50
100
100
75
100
100
100
50
100
100
75
100
100
ETSI
NUL/DL
38849
38894
38948
38899
38921
38948
38948
39101
39150
39200
39125
39150
39175
39150
39352
39406
39451
39352
39379
39401
39352
CC3
Note1
fUL/DL
[MHz]
2319.9
2324.4
2329.8
2324.9
2327.1
2329.8
2329.8
2345.1
2350
2355
2347.5
2350
2352.5
2350
2370.2
2375.6
2380.1
2370.2
2372.9
2375.1
2370.2
BW
[RB]
100
100
50
100
100
75
100
100
100
50
100
100
75
100
100
100
50
100
100
75
100
NUL/DL
39047
39038
39092
39097
39092
39119
39146
39299
39294
39344
39323
39321
39346
39348
39550
39550
39595
39550
39550
39572
39550
fUL/DL
[MHz]
2339.7
2338.8
2344.2
2344.7
2344.2
2346.9
2349.6
2364.9
2364.4
2369.4
2367.3
2367.1
2369.6
2369.8
2390
2390
2394.5
2390
2390
2392.2
2390
3GPP TS 36.508 version 15.5.0 Release 15
91
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.8A-3: Test frequencies for CA_40E
Range
Low
Mid
High
Note 1:
CC-Combo /
NRB_agg
[RB]
75+75+75+100
75+75+100+100
CC1
Note1
BW
[RB]
NUL/DL
75
38728
75
38728
75
38728
100
38750
75+100+100+100
75
38728
100
38750
100
38750
100+100+100+100
100
38750
75+75+75+100
75
38903
75+75+100+100
75
38879
75
38882
100
38904
75+100+100+100
75
38855
100
38880
100
38880
100+100+100+100
100
38853
75+75+75+100
75
39079
75+75+100+100
75
39031
75
39037
100
39058
75+100+100+100
75
38983
100
39010
100
39010
100+100+100+100
100
38956
Carriers in increasing frequency order.
CC2
Note1
fUL/DL
[MHz]
2307.8
2307.8
2307.8
2310
2307.8
2310
2310
2310
2325.3
2322.9
2323.2
2325.4
2320.5
2323
2323
2320.3
2342.9
2338.1
2338.7
2340.8
2333.3
2336
2336
2330.6
BW
[RB]
75
75
100
75
100
75
100
100
75
75
100
75
100
75
100
100
75
75
100
75
100
75
100
100
NUL/DL
38878
38878
38899
38921
38899
38921
38948
38948
39053
39029
39053
39075
39026
39051
39078
39051
39229
39181
39208
39229
39154
39181
39208
39154
ETSI
CC3
Note1
fUL/DL
[MHz]
2322.8
2322.8
2324.9
2327.1
2324.9
2327.1
2329.8
2329.8
2340.3
2337.9
2340.3
2342.5
2337.6
2340.1
2342.8
2340.1
2357.9
2353.1
2355.8
2357.9
2350.4
2353.1
2355.8
2350.4
BW
[RB]
75
100
75
75
100
100
75
100
75
100
75
75
100
100
75
100
75
100
75
75
100
100
75
100
NUL/DL
39028
39049
39070
39071
39097
39092
39119
39146
39203
39200
39224
39225
39224
39222
39249
39249
39379
39352
39379
39379
39352
39352
39379
39352
CC4
Note1
fUL/DL
[MHz]
2337.8
2339.9
2342
2342.1
2344.7
2344.2
2346.9
2349.6
2355.3
2355
2357.4
2357.5
2357.4
2357.2
2359.9
2359.9
2372.9
2370.2
2372.9
2372.9
2370.2
2370.2
2372.9
2370.2
BW
[RB]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
NUL/DL
39199
39247
39241
39242
39295
39290
39290
39344
39374
39398
39395
39396
39422
39420
39420
39447
39550
39550
39550
39550
39550
39550
39550
39550
fUL/DL
[MHz]
2354.9
2359.7
2359.1
2359.2
2364.5
2364
2364
2369.4
2372.4
2374.8
2374.5
2374.6
2377.2
2377
2377
2379.7
2390
2390
2390
2390
2390
2390
2390
2390
3GPP TS 36.508 version 15.5.0 Release 15
92
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.8A-4: Test frequencies for CA_40A-40A
Test
Frequency
ID
CC1
Note1
CC-Combo /
NRB_agg
[RB]
50+50
50+75
BW
[RB]
NUL/DL
50
38700
50
38700
75
38725
50
38700
50+100
100
38750
Max WGap
75+75
75
38725
75
38725
75+100
100
38750
100
38750
100+100
Note 1: Carriers in increasing frequency order.
Wgap
[MHz]
fUL/DL
[MHz]
2305
2305
2307.5
2305
2310
2307.5
2307.5
2310
2310
80
75
75
70
70
70
65
65
60
CC2
Note1
BW
[RB]
50
75
50
100
50
75
100
75
100
NUL/DL
39600
39575
39600
39550
39600
39575
39550
39575
39550
Table 4.3.1.2.8A-5: Test frequencies for CA_40A-40C
Test
Frequency
ID
CC-Combo /
NRB_agg
[RB]
100+50+100
CC1
Note1
BW
[RB]
NUL/DL
100
38750
100
38750
100
38750
100+75+75
Max WGap
100
38750
100+75+100
100
38750
100
38750
100+100+100
Note 1: Carriers in increasing frequency order.
Wgap
[MHz]
fUL/DL
[MHz]
2310
2310
2310
2310
2310
2310
50.6
50.1
50
45.4
45.1
40.2
CC2
Note1
BW
[RB
50
100
75
75
100
100
NUL/DL
39406
39451
39425
39379
39401
39352
ETSI
CC3
Note1
fUL/DL
[MHz]
2375.6
2380.1
2377.5
2372.9
2375.1
2370.2
BW
[RB]
100
50
75
100
75
100
NUL/DL
39550
39595
39575
39550
39572
39550
fUL/DL
[MHz]
2390
2394.5
2392.5
2390
2392.2
2390
fUL/DL
[MHz]
2395
2392.5
2395
2390
2395
2392.5
2390
2392.5
2390
3GPP TS 36.508 version 15.5.0 Release 15
93
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.8A-6: Test frequencies for CA_40C-40C
Test
frequency
ID
CC-Combo /
CC1
CC2
Wgap
CC3
CC4
NRB_agg
Note1
Note1
[MHz]
Note1
Note1
[RB]
BW
[RB]
50+50+
100+100
50+75+75
100
75+75+
75+75
75+75+
75+100
Max Wgap
50+75+
100+100
50+100+
100+100
75+75+
100+100
NUL/DL
fUL/DL
BW
[MHz]
[RB]
NUL/DL
fUL/DL
BW
[MHz]
[RB
NUL/DL
fUL/DL
BW
[MHz]
[RB]
NUL/DL
fUL/DL
[MHz]
50
38705
2305.5
100
38849
2319.9
40.7
50
39406
2375.6
100
39550
2390
100
50
100
38750
38705
38750
2310
2305.5
2310
50
100
50
38894
38849
38894
2324.4
2319.9
2324.4
40.7
40.2
41.2
100
100
50
39451
39451
39406
2380.1
2380.1
2375.6
50
50
100
39595
39595
39550
2394.5
2394.5
2390
50
38705
2305.5
100
38849
2319.9
40.1
75
39425
2377.5
75
39575
2392.5
100
75
75
38750
38725
38725
2310
2307.5
2307.5
50
75
75
38894
38875
38875
2324.4
2322.5
2322.5
40.6
40.6
40.1
75
50
100
39425
39406
39451
2377.5
2375.6
2380.1
75
100
50
39575
39550
39595
2392.5
2390
2394.5
75
38725
2307.5
75
38875
2322.5
40
75
39425
2377.5
75
39575
2392.5
75
38725
2307.5
75
38875
2322.5
35.4
75
39379
2372.9
100
39550
2390
75
75
100
38725
38728
38750
2307.5
2307.8
2310
75
100
75
38875
38899
38921
2322.5
2324.9
2327.1
35.1
35.1
35.4
100
75
75
39401
39425
39425
2375.1
2377.5
2377.5
75
75
75
39572
39575
39575
2392.2
2392.5
2392.5
50
38705
2305.5
100
38849
2319.9
35.5
75
39379
2372.9
100
39550
2390
50
75
75
100
100
100
100
38705
38728
38728
38750
38750
38750
38750
2305.5
2307.8
2307.8
2310
2310
2310
2310
100
100
100
50
50
75
75
38849
38899
38899
38894
38894
38921
38921
2319.9
2324.9
2324.9
2324.4
2324.4
2327.1
2327.1
35.2
35.7
35.2
36
35.7
36
35.5
100
50
100
75
100
50
100
39401
39406
39451
39379
39401
39406
39451
2375.1
2375.6
2380.1
2372.9
2375.1
2375.6
2380.1
75
100
50
100
75
100
50
39572
39550
39595
39550
39572
39550
39595
2392.2
2390
2394.5
2390
2392.2
2390
2394.5
50
38705
2305.5
100
38849
2319.9
30.3
100
39352
2370.2
100
39550
2390
100
100
100
38750
38750
38750
2310
2310
2310
50
100
100
38894
38948
38948
2324.4
2329.8
2329.8
30.8
30.8
30.3
100
50
100
39352
39406
39451
2370.2
2375.6
2380.1
100
100
50
39550
39550
39595
2390
2390
2394.5
75
38725
2307.5
75
38875
2322.5
30.2
100
39352
2370.2
100
39550
2390
100
38750
2310
100
38948
2329.8
30.2
75
39425
2377.5
75
39575
2392.5
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
75+100+
100+100
100+100+
100+100
94
ETSI TS 136 508 V15.5.0 (2019-07)
75
75
100
100
38728
38728
38750
38750
2307.8
2307.8
2310
2310
100
100
75
75
38899
38899
38921
38921
2324.9
2324.9
2327.1
2327.1
30.5
30.2
30.8
30.5
75
100
75
100
39379
39401
39379
39401
2372.9
2375.1
2372.9
2375.1
100
75
100
75
39550
39572
39550
39572
2390
2392.2
2390
2392.2
75
38728
2307.8
100
38899
2324.9
25.3
100
39352
2370.2
100
39550
2390
100
100
100
38750
38750
38750
2310
2310
2310
75
100
100
38921
38948
38948
2327.1
2329.8
2329.8
25.6
25.6
25.3
100
75
100
39352
39379
39401
2370.2
2372.9
2375.1
100
100
75
39550
39550
39572
2390
2390
2392.2
100
38750
2310
100
38948
2329.8
20.4
100
39352
2370.2
100
39550
2390
Note 1: Carriers in increasing frequency order.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.2.9
95
ETSI TS 136 508 V15.5.0 (2019-07)
TDD reference test frequencies for Operating Band 41
Table 4.3.1.2.9-1: Test frequencies for E-UTRA channel bandwidth for operating band 41
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
EARFCN
39675
39700
39725
39750
40620
41565
41540
41515
41490
Frequency (UL and DL)
[MHz]
2498.5
2501
2503.5
2506
2593
2687.5
2685
2682.5
2680
4.3.1.2.9A TDD reference test frequencies for CA in operating band 41
Table 4.3.1.2.9A-1: Test frequencies for CA_41C
Range
Low
Mid
High
Note 1:
CCCombo /
NRB_agg
[RB]
CC1
Note1
BW
[RB]
NUL/DL
25+100
25
39683
100
39750
50+75
50
39703
75
39725
50+100
50
39705
100
39750
75+75
75
39725
75+100
75
39728
100
39750
100+100
100
39750
25+100
25
40528
100
40595
50+75
50
40549
75
40571
50+100
50
40526
100
40571
75+75
75
40545
75+100
75
40523
100
40546
100+100
100
40521
25+100
25
41373
100
41440
50+75
50
41395
75
41417
50+100
50
41346
100
41391
75+75
75
41365
75+100
75
41319
100
41341
100+100
100
41292
Carriers in increasing frequency order.
CC2
Note1
fUL/DL
[MHz]
2499.3
2506
2501.3
2503.5
2501.5
2506
2503.5
2503.8
2506
2506
2583.8
2590.5
2585.9
2588.1
2583.6
2588.1
2585.5
2583.3
2585.6
2583.1
2668.3
2675
2670.5
2672.7
2665.6
2670.1
2667.5
2662.9
2665.1
2660.2
ETSI
BW
[RB]
100
25
75
50
100
50
75
100
75
100
100
25
75
50
100
50
75
100
75
100
100
25
75
50
100
50
75
100
75
100
NUL/DL
39800
39867
39823
39845
39849
39894
39875
39899
39921
39948
40645
40712
40669
40691
40670
40715
40695
40694
40717
40719
41490
41557
41515
41537
41490
41535
41515
41490
41512
41490
fUL/DL
[MHz]
2511
2517.7
2513.3
2515.5
2515.9
2520.4
2518.5
2520.9
2523.1
2525.8
2595.5
2602.2
2597.9
2600.1
2598.0
2602.5
2600.5
2600.4
2602.7
2602.9
2680
2686.7
2682.5
2684.7
2680
2684.5
2682.5
2680
2682.2
2680
3GPP TS 36.508 version 15.5.0 Release 15
96
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.9A-2: Test frequencies for CA_41A-41A
Test
Frequency
ID
CCCombo
/
NRB_agg
[RB]
CC1
Note1
BW
fUL/DL
[RB]
NUL/DL
[MHz]
25
39675 2498.5
25+25
25
39675 2498.5
25+50
50
39700
2501
25+75
25
39675 2498.5
75
39725 2503.5
50
39700
2501
50+50
25
39675 2498.5
25+100
100
39750
2506
Max WGap
50+75
50
39700
2501
75
39725 2503.5
50
39700
2501
50+100
100
39750
2506
75+75
75
39725 2503.5
75
39725 2503.5
75+100
100
39750
2506
100
39750
2506
100+100
Note 1: Carriers in increasing frequency order.
ETSI
CC2
Note1
Wgap
[MHz]
184
179
179
174
174
174
169
169
169
169
164
164
164
159
159
154
BW
[RB]
25
50
25
75
25
50
100
25
75
50
100
50
75
100
75
100
NUL/DL
41565
41540
41565
41515
41565
41540
41490
41565
41515
41540
41490
41540
41515
41490
41515
41490
fUL/DL
[MHz]
2687.5
2685
2687.5
2682.5
2687.5
2685
2680
2687.5
2682.5
2685
2680
2685
2682.5
2680
2682.5
2680
3GPP TS 36.508 version 15.5.0 Release 15
97
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.9A-3: Test frequencies for CA_41D
Range
Low
Mid
High
Note 1:
CC-Combo /
NRB_agg
[RB]
50+75+100
CC1
Note1
CC2
Note1
BW
fUL/DL
[RB] NUL/DL [MHz]
50
39705 2501.5
50
39705 2501.5
75
39728 2503.8
75
39728 2503.8
100 39750
2506
100 39750
2506
50+100+100
50
39705 2501.5
100 39750
2506
100 39750
2506
75+75+100
75
39728 2503.8
75
39728 2503.8
100 39750
2506
75+100+100
75
39728 2503.8
100 39750
2506
100 39750
2506
100+100+100 100 39750
2506
50+75+100
50
40452 2576.2
50
40451 2576.1
75
40477 2578.7
75
40474 2578.4
100 40499 2580.9
100 40497 2580.7
50+100+100
50
40427 2573.7
100 40476 2578.6
100 40472 2578.2
75+75+100
75
40448 2575.8
75
40449 2575.9
100 40471 2578.1
75+100+100
75
40424 2573.4
100 40449 2575.9
100 40447 2575.7
100+100+100 100 40422 2573.2
50+75+100
50
41199 2650.9
50
41197 2650.7
75
41226 2653.6
75
41220
2653
100 41248 2655.8
100 41244 2655.4
50+100+100
50
41148 2645.8
100 41202 2651.2
100 41193 2650.3
75+75+100
75
41169 2647.9
75
41170
2648
100 41191 2650.1
75+100+100
75
41121 2643.1
100 41148 2645.8
100 41143 2645.3
100+100+100 100 41094 2640.4
Carriers in increasing frequency order.
BW
[RB]
75
100
50
100
50
75
100
50
100
75
100
75
100
75
100
100
75
100
50
100
50
75
100
50
100
75
100
75
100
75
100
100
75
100
50
100
50
75
100
50
100
75
100
75
100
75
100
100
ETSI
NUL/DL
39825
39849
39848
39899
39894
39921
39849
39894
39948
39878
39899
39921
39899
39921
39948
39948
40572
40595
40597
40645
40643
40668
40571
40620
40670
40598
40620
40642
40595
40620
40645
40620
41319
41341
41346
41391
41392
41415
41292
41346
41391
41319
41341
41362
41292
41319
41341
41292
CC3
Note1
fUL/DL
[MHz]
2513.5
2515.9
2515.8
2520.9
2520.4
2523.1
2515.9
2520.4
2525.8
2518.8
2520.9
2523.1
2520.9
2523.1
2525.8
2525.8
2588.2
2590.5
2590.7
2595.5
2595.3
2597.8
2588.1
2593
2598
2590.8
2593
2595.2
2590.5
2593
2595.5
2593
2662.9
2665.1
2665.6
2670.1
2670.2
2672.5
2660.2
2665.6
2670.1
2662.9
2665.1
2667.2
2660.2
2662.9
2665.1
2660.2
BW
[RB]
100
75
100
50
75
50
100
100
50
100
75
75
100
100
75
100
100
75
100
50
75
50
100
100
50
100
75
75
100
100
75
100
100
75
100
50
75
50
100
100
50
100
75
75
100
100
75
100
NUL/DL
39996
40020
39992
40043
40014
40041
40047
40038
40092
40049
40070
40071
40097
40092
40119
40146
40743
40766
40741
40789
40763
40788
40769
40764
40814
40769
40791
40792
40793
40791
40816
40818
41490
41512
41490
41535
41512
41535
41490
41490
41535
41490
41512
41512
41490
41490
41512
41490
fUL/DL
[MHz]
2530.6
2533
2530.2
2535.3
2532.4
2535.1
2535.7
2534.8
2540.2
2535.9
2538
2538.1
2540.7
2540.2
2542.9
2545.6
2605.3
2607.6
2605.1
2609.9
2607.3
2609.8
2607.9
2607.4
2612.4
2607.9
2610.1
2610.2
2610.3
2610.1
2612.6
2612.8
2680
2682.2
2680
2684.5
2682.2
2684.5
2680
2680
2684.5
2680
2682.2
2682.2
2680
2680
2682.2
2680
3GPP TS 36.508 version 15.5.0 Release 15
98
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.9A-4: Test frequencies for CA_41C-41A
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Test
Frequen
cy ID
ETSI TS 136 508 V15.5.0 (2019-07)
25+25+100
BW
[RB]
NUL/DL
fUL/DL
[MHz]
2499.
3
B
W
[R
B
10
0
25
10
0
10
0
25
39683
100
39750
25
39683
50
39705
2506
2499.
3
2501.
5
100
39750
2506
25
100
39750
50
25+75+75
75
39725
25+75+100
25
39683
75
39728
2506
2503.
5
2499.
3
2503.
8
75
10
0
10
0
100
39750
2506
25
100
39750
50
39705
2506
2501.
5
75
10
0
100
39750
50
50+75+75
75
39725
25+100+100
25
39683
2506
2503.
5
2499.
3
100
39750
2506
100
39750
50
39705
75
39728
2506
2501.
5
2503.
8
25
10
0
10
0
10
0
100
39750
2506
50
100
39750
75
75+75+75
75
39725
50+100+100
50
39705
2506
2503.
5
2501.
5
100
39750
2506
100
39750
75
39725
75
39728
2506
2503.
5
2503.
8
100
39750
75
39728
25+50+100
50+50+100
50+75+100
75+75+100
75+100+100
Wga
p
[MHz
]
CC2
Note
1
CC1
Note1
CC-Combo /
NRB_agg
[RB]
Max
WGap
99
2506
2503.
8
ETSI
75
10
0
75
10
0
50
10
0
75
10
0
75
10
0
NUL/D
L
3980
0
3986
7
3980
0
3984
9
3986
7
3989
4
3987
5
3980
0
3989
9
3986
7
3992
1
3984
9
3989
4
3987
5
3980
0
3986
7
3994
8
3984
9
3989
9
3989
4
3992
1
3987
5
3984
9
3989
4
3994
8
3987
5
3989
9
3992
1
3989
9
CC3
Note
1
BW
[RB
]
fUL/DL
[MHz
]
2511
2517.
7
164
164.0
5
25
2511
2515.
9
2517.
7
2520.
4
2518.
5
159
50
159.1
159.0
5
25
50
159.1
25
159
25
154
75
154.1
154.0
5
154.1
5
25
75
154.1
50
154.1
50
154
50
149
149.0
5
100
100
149.2
25
149.1
75
149.1
50
149.1
149.1
5
75
50
149
75
144.1
100
144.1
100
144.2
50
144
100
144.1
144.1
5
75
75
139.1
100
2511
2520.
9
2517.
7
2523.
1
2515.
9
2520.
4
2518.
5
2511
2517.
7
2525.
8
2515.
9
2520.
9
2520.
4
2523.
1
2518.
5
2515.
9
2520.
4
2525.
8
2518.
5
2520.
9
2523.
1
2520.
9
25
25
NUL/D
L
4156
5
4156
5
4154
0
4156
5
4154
0
4156
5
4156
5
4151
5
4156
5
4151
5
4156
5
4154
0
4154
0
4154
0
4149
0
4149
0
4156
5
4151
5
4154
0
4151
5
4154
0
4151
5
4149
0
4149
0
4154
0
4149
0
4151
5
4151
5
4149
0
fUL/DL
[MHz
]
2687.
5
2687.
5
2685
2687.
5
2685
2687.
5
2687.
5
2682.
5
2687.
5
2682.
5
2687.
5
2685
2685
2685
2680
2680
2687.
5
2682.
5
2685
2682.
5
2685
2682.
5
2680
2680
2685
2680
2682.
5
2682.
5
2680
3GPP TS 36.508 version 15.5.0 Release 15
Note 1:
100
100
39750
2506
100
39750
2506
100+100+100
100
39750
Carriers in increasing frequency order.
2506
ETSI TS 136 508 V15.5.0 (2019-07)
75
10
0
10
0
3992
1
3994
8
3994
8
2523.
1
2525.
8
2525.
8
139.1
5
100
139.2
75
134.2
100
4149
0
4151
5
4149
0
2680
2682.
5
2680
Table 4.3.1.2.9A-5: Test frequencies for CA_41A-41C
Test
Frequency
ID
CC-Combo /
NRB_agg
[RB]
25+25+100
CC1
Note1
BW
[RB]
NUL/DL
25
39675
25
39675
25+50+100
25
39675
25
39675
50
39700
50
39700
25+75+75
25
39675
25+75+100
25
39675
25
39675
75
39725
75
39725
50+50+100
50
39700
50
39700
25+100+100
25
39675
100
39750
100
39750
Max WGap
50+75+75
50
39700
50+75+100
50
39700
50
39700
75
39725
75
39725
75+75+75
75
39725
50+100+100
50
39700
100
39750
100
39750
75+75+100
75
39725
75
39725
100
39750
75+100+100
75
39725
100
39750
100
39750
100+100+100
100
39750
Note 1: Carriers in increasing frequency order.
Wgap
[MHz]
fUL/DL
[MHz]
2498.5
2498.5
2498.5
2498.5
2501
2501
2498.5
2498.5
2498.5
2503.5
2503.5
2501
2501
2498.5
2506
2506
2501
2501
2501
2503.5
2503.5
2503.5
2501
2506
2506
2503.5
2503.5
2506
2503.5
2506
2506
2506
ETSI
164.05
164
159.1
159.1
159.05
159
159
154.15
154.1
154.05
154
154.1
154.1
149.2
149.05
149
154
149.15
149.1
149.1
149.1
149
144.2
144.1
144.1
144.15
144.1
144
139.2
139.15
139.1
134.2
CC2
Note1
BW
[RB
25
100
50
100
25
100
75
75
100
25
100
50
100
100
25
100
75
75
100
50
100
75
100
50
100
75
100
75
100
75
100
100
NUL/DL
41373
41440
41346
41391
41373
41440
41365
41319
41341
41373
41440
41346
41391
41292
41373
41440
41365
41319
41341
41346
41391
41365
41292
41346
41391
41319
41341
41365
41292
41319
41341
41292
CC3
Note1
fUL/DL
[MHz]
2668.3
2675
2665.6
2670.1
2668.3
2675
2667.5
2662.9
2665.1
2668.3
2675
2665.6
2670.1
2660.2
2668.3
2675
2667.5
2662.9
2665.1
2665.6
2670.1
2667.5
2660.2
2665.6
2670.1
2662.9
2665.1
2667.5
2660.2
2662.9
2665.1
2660.2
BW
[RB]
100
25
100
50
100
25
75
100
75
100
25
100
50
100
100
25
75
100
75
100
50
75
100
100
50
100
75
75
100
100
75
100
NUL/DL
41490
41557
41490
41535
41490
41557
41515
41490
41512
41490
41557
41490
41535
41490
41490
41557
41515
41490
41512
41490
41535
41515
41490
41490
41535
41490
41512
41515
41490
41490
41512
41490
fUL/DL
[MHz]
2680
2686.7
2680
2684.5
2680
2686.7
2682.5
2680
2682.2
2680
2686.7
2680
2684.5
2680
2680
2686.7
2682.5
2680
2682.2
2680
2684.5
2682.5
2680
2680
2684.5
2680
2682.2
2682.5
2680
2680
2682.2
2680
3GPP TS 36.508 version 15.5.0 Release 15
101
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.9A-6: Test frequencies for CA_41C-41C
Test
frequency
ID
CCCombo /
NRB_agg
[RB]
BW
[RB]
50+50+
100+100
50+75+75
100
50+75+
100+100
Max Wgap
50+100+
100+100
75+75+
75+100
75+75+
100+100
75+100+
100+100
CC1
CC2
Wgap
CC3
CC4
Note1
Note1
[MHz]
Note1
Note1
NUL/DL
fUL/DL
BW
[MHz]
[RB]
NUL/DL
fUL/DL
BW
[MHz]
[RB
NUL/DL
fUL/DL
BW
[MHz]
[RB]
NUL/DL
fUL/DL
[MHz]
50
100
50
100
39705
39750
39705
39750
2501.5
2506
2501.5
2506
100
50
100
50
39849
39894
39849
39894
2515.9
2520.4
2515.9
2520.4
134.7
134.7
134.2
135.2
50
100
100
50
41346
41391
41391
41346
2665.6
2670.1
2670.1
2665.6
100
50
50
100
41490
41535
41535
41490
2680
2684.5
2684.5
2680
50
100
75
75
39705
39750
39725
39725
2501.5
2506
2503.5
2503.5
100
50
75
75
39849
39894
39875
39875
2515.9
2520.4
2518.5
2518.5
134.1
134.6
134.6
134.1
75
75
50
100
41365
41365
41346
41391
2667.5
2667.5
2665.6
2670.1
75
75
100
50
41515
41515
41490
41535
2682.5
2682.5
2680
2684.5
50
100
50
100
75
100
100
75
39705
39750
39705
39750
40523
39750
39750
40523
2501.5
2506
2501.5
2506
2583.3
2506
2506
2583.3
100
50
100
50
100
75
75
100
39849
39894
39849
39894
40694
39921
39921
40694
2515.9
2520.4
2515.9
2520.4
2600.4
2523.1
2523.1
2600.4
129.5
129.7
129.2
130
50.2
129.5
130
49.7
75
100
100
75
50
100
50
100
41319
41341
41341
41319
41346
41391
41346
41391
2662.9
2665.1
2665.1
2662.9
2665.6
2670.1
2665.6
2670.1
100
75
75
100
100
50
100
50
41490
41512
41512
41490
41490
41535
41490
41535
2680
2682.2
2682.2
2680
2680
2684.5
2680
2684.5
50
100
100
100
39705
39750
39750
39750
2501.5
2506
2506
2506
100
50
100
100
39849
39894
39948
39948
2515.9
2520.4
2525.8
2525.8
124.3
124.8
124.8
124.3
100
100
50
100
41292
41292
41346
41391
2660.2
2660.2
2665.6
2670.1
100
100
100
50
41490
41490
41490
41535
2680
2680
2680
2684.5
75
100
75
75
40523
39750
39725
39725
2583.3
2506
2503.5
2503.5
100
75
75
75
40694
39921
39875
39875
2600.4
2523.1
2518.5
2518.5
49.6
129.4
129.4
129.1
75
75
75
100
41365
41365
41319
41341
2667.5
2667.5
2662.9
2665.1
75
75
100
75
41515
41515
41490
41512
2682.5
2682.5
2680
2682.2
75
100
39725
39750
2503.5
2506
75
100
39875
39948
2518.5
2525.8
124.2
124.2
100
75
41292
41365
2660.2
2667.5
100
75
41490
41515
2680
2682.5
75
40523
2583.3
100
40694
2600.4
39.8
100
41292
2660.2
100
41490
2680
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
100+100+
100+100
102
ETSI TS 136 508 V15.5.0 (2019-07)
100
100
100
39750
39750
39750
2506
2506
2506
75
100
100
39921
39948
39948
2523.1
2525.8
2525.8
119.6
119.6
119.3
100
75
100
41292
41319
41341
2660.2
2662.9
2665.1
100
100
75
41490
41490
41512
2680
2680
2682.2
100
39750
2506
100
39948
2525.8
114.4
100
41292
2660.2
100
41490
2680
Note 1: Carriers in increasing frequency order.
Table 4.3.1.2.9A-7: Test frequencies for CA_41A-41D
Test
frequency
ID
CCCombo /
NRB_agg
[RB]
BW
[RB]
25+50+
75+100
25+50+
100+100
Max Wgap
25+75+
75+100
25+75+
100+100
25+100+
100+100
50+50+
75+100
CC1
Wgap
CC2
CC3
CC4
Note1
[MHz]
Note1
Note1
Note1
NUL/DL
fUL/DL
BW
[MHz]
[RB]
NUL/DL
fUL/DL
BW
[MHz]
[RB]
NUL/DL
fUL/DL
BW
[MHz]
[RB]
NUL/DL
fUL/DL
[MHz]
25
25
25
25
25
25
39675
39675
39675
39675
39675
39675
2498.5
2498.5
2498.5
2498.5
2498.5
2498.5
144.9
144.7
145.1
144.5
144.8
144.4
50
50
75
75
100
100
41199
41197
41226
41220
41248
41244
2650.9
2650.7
2653.6
2653
2655.8
2655.4
75
100
50
100
50
75
41319
41341
41346
41391
41392
41415
2662.9
2665.1
2665.6
2670.1
2670.2
2672.5
100
75
100
50
75
50
41490
41512
41490
41535
41512
41535
2680
2682.2
2680
2684.5
2682.2
2684.5
25
25
25
39675
39675
39675
2498.5
2498.5
2498.5
139.8
140.2
139.3
50
100
100
41148
41202
41193
2645.8
2651.2
2650.3
100
50
100
41292
41346
41391
2660.2
2665.6
2670.1
100
100
50
41490
41490
41535
2680
2680
2684.5
25
25
25
39675
39675
39675
2498.5
2498.5
2498.5
139.4
139.5
139.1
75
75
100
41169
41170
41191
2647.9
2648
2650.1
75
100
75
41319
41341
41362
2662.9
2665.1
2667.2
100
75
75
41490
41512
41512
2680
2682.2
2682.2
25
25
25
39675
39675
39675
2498.5
2498.5
2498.5
134.6
134.8
134.3
75
100
100
41121
41148
41143
2643.1
2645.8
2645.3
100
75
100
41292
41319
41341
2660.2
2662.9
2665.1
100
100
75
41490
41490
41512
2680
2680
2682.2
25
39675
2498.5
129.4
100
41094
2640.4
100
41292
2660.2
100
41490
2680
50
50
50
50
39700
39700
39700
39700
2501
2501
2501
2501
139.9
139.7
140.1
139.5
50
50
75
75
41199
41197
41226
41220
2650.9
2650.7
2653.6
2653
75
100
50
100
41319
41341
41346
41391
2662.9
2665.1
2665.6
2670.1
100
75
100
50
41490
41512
41490
41535
2680
2682.2
2680
2684.5
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
50+50+
100+100
50+75+
75+100
50+75+
100+100
50+100+
100+100
75+75+
75+100
75+75+
100+100
103
ETSI TS 136 508 V15.5.0 (2019-07)
50
50
39700
39700
2501
2501
139.8
139.4
100
100
41248
41244
2655.8
2655.4
50
75
41392
41415
2670.2
2672.5
75
50
41512
41535
2682.2
2684.5
50
50
50
39700
39700
39700
2501
2501
2501
134.8
135.2
134.3
50
100
100
41148
41202
41193
2645.8
2651.2
2650.3
100
50
100
41292
41346
41391
2660.2
2665.6
2670.1
100
100
50
41490
41490
41535
2680
2680
2684.5
50
50
50
75
75
75
75
75
75
39700
39700
39700
39725
39725
39725
39725
39725
39725
2501
2501
2501
2503.5
2503.5
2503.5
2503.5
2503.5
2503.5
134.4
134.5
134.1
134.9
134.7
135.1
134.5
134.8
134.4
75
75
100
50
50
75
75
100
100
41169
41170
41191
41199
41197
41226
41220
41248
41244
2647.9
2648
2650.1
2650.9
2650.7
2653.6
2653
2655.8
2655.4
75
100
75
75
100
50
100
50
75
41319
41341
41362
41319
41341
41346
41391
41392
41415
2662.9
2665.1
2667.2
2662.9
2665.1
2665.6
2670.1
2670.2
2672.5
100
75
75
100
75
100
50
75
50
41490
41512
41512
41490
41512
41490
41535
41512
41535
2680
2682.2
2682.2
2680
2682.2
2680
2684.5
2682.2
2684.5
50
50
50
75
75
75
100
100
100
100
100
100
39700
39700
39700
39725
39725
39725
39750
39750
39750
39750
39750
39750
2501
2501
2501
2503.5
2503.5
2503.5
2506
2506
2506
2506
2506
2506
129.6
129.8
129.3
129.8
130.2
129.3
129.9
129.7
130.1
129.5
129.8
129.4
75
100
100
50
100
100
50
50
75
75
100
100
41121
41148
41143
41148
41202
41193
41199
41197
41226
41220
41248
41244
2643.1
2645.8
2645.3
2645.8
2651.2
2650.3
2650.9
2650.7
2653.6
2653
2655.8
2655.4
100
75
100
100
50
100
75
100
50
100
50
75
41292
41319
41341
41292
41346
41391
41319
41341
41346
41391
41392
41415
2660.2
2662.9
2665.1
2660.2
2665.6
2670.1
2662.9
2665.1
2665.6
2670.1
2670.2
2672.5
100
100
75
100
100
50
100
75
100
50
75
50
41490
41490
41512
41490
41490
41535
41490
41512
41490
41535
41512
41535
2680
2680
2682.2
2680
2680
2684.5
2680
2682.2
2680
2684.5
2682.2
2684.5
50
100
100
100
39700
39750
39750
39750
2501
2506
2506
2506
124.4
124.8
125.2
124.3
100
50
100
100
41094
41148
41202
41193
2640.4
2645.8
2651.2
2650.3
100
100
50
100
41292
41292
41346
41391
2660.2
2660.2
2665.6
2670.1
100
100
100
50
41490
41490
41490
41535
2680
2680
2680
2684.5
75
75
75
39725
39725
39725
2503.5
2503.5
2503.5
129.4
129.5
129.1
75
75
100
41169
41170
41191
2647.9
2648
2650.1
75
100
75
41319
41341
41362
2662.9
2665.1
2667.2
100
75
75
41490
41512
41512
2680
2682.2
2682.2
75
75
39725
39725
2503.5
2503.5
124.6
124.8
75
100
41121
41148
2643.1
2645.8
100
75
41292
41319
2660.2
2662.9
100
100
41490
41490
2680
2680
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
75+100+
100+100
100+100+
100+100
Note 1:
104
ETSI TS 136 508 V15.5.0 (2019-07)
75
100
100
100
39725
39750
39750
39750
2503.5
2506
2506
2506
124.3
124.4
124.5
124.1
100
75
75
100
41143
41169
41170
41191
2645.3
2647.9
2648
2650.1
100
75
100
75
41341
41319
41341
41362
2665.1
2662.9
2665.1
2667.2
75
100
75
75
41512
41490
41512
41512
2682.2
2680
2682.2
2682.2
75
100
100
100
39725
39750
39750
39750
2503.5
2506
2506
2506
119.4
119.6
119.8
119.3
100
75
100
100
41094
41121
41148
41143
2640.4
2643.1
2645.8
2645.3
100
100
75
100
41292
41292
41319
41341
2660.2
2660.2
2662.9
2665.1
100
100
100
75
41490
41490
41490
41512
2680
2680
2680
2682.2
100
39750
2506
114.4
100
41094
2640.4
100
41292
2660.2
100
41490
2680
Carriers in increasing frequency order.
Table 4.3.1.2.9A-8: Test frequencies for CA_41D-41A
Test
frequency
ID
CCCombo /
NRB_agg
[RB]
CC1
Note1
BW
[RB]
25+50+
75+100
25+50+
100+100
25+75+
75+100
25+75+
100+100
Max Wgap
CC2
NUL/DL
CC3
Note1
fUL/DL
BW
[MHz]
[RB]
NUL/DL
Wgap
Note1
fUL/DL
BW
[MHz]
[RB]
NUL/DL
CC4
[MHz]
Note1
fUL/DL
BW
[MHz]
[RB]
NUL/DL
fUL/DL
[MHz]
50
50
75
75
100
100
39705
39705
39728
39728
39750
39750
2501.5
2501.5
2503.8
2503.8
2506
2506
75
100
50
100
50
75
39825
39849
39848
39899
39894
39921
2513.5
2515.9
2515.8
2520.9
2520.4
2523.1
100
75
100
50
75
50
39996
40020
39992
40043
40014
40041
2530.6
2533
2530.2
2535.3
2532.4
2535.1
144.4
144.5
144.8
144.7
145.1
144.9
25
25
25
25
25
25
41565
41565
41565
41565
41565
41565
2687.5
2687.5
2687.5
2687.5
2687.5
2687.5
50
100
100
39705
39750
39750
2501.5
2506
2506
100
50
100
39849
39894
39948
2515.9
2520.4
2525.8
100
100
50
40047
40038
40092
2535.7
2534.8
2540.2
139.3
140.2
139.8
25
25
25
41565
41565
41565
2687.5
2687.5
2687.5
75
75
100
39728
39728
39750
2503.8
2503.8
2506
75
100
75
39878
39899
39921
2518.8
2520.9
2523.1
100
75
75
40049
40070
40071
2535.9
2538
2538.1
139.1
139.5
139.4
25
25
25
41565
41565
41565
2687.5
2687.5
2687.5
75
100
100
39728
39750
39750
2503.8
2506
2506
100
75
100
39899
39921
39948
2520.9
2523.1
2525.8
100
100
75
40097
40092
40119
2540.7
2540.2
2542.9
134.3
134.8
134.6
25
25
25
41565
41565
41565
2687.5
2687.5
2687.5
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
25+100+
100+100
50+50+
75+100
50+50+
100+100
50+75+
75+100
50+75+
100+100
50+100+
100+100
105
ETSI TS 136 508 V15.5.0 (2019-07)
100
39750
2506
100
39948
2525.8
100
40146
2545.6
129.4
25
41565
2687.5
50
50
75
75
100
100
39705
39705
39728
39728
39750
39750
2501.5
2501.5
2503.8
2503.8
2506
2506
75
100
50
100
50
75
39825
39849
39848
39899
39894
39921
2513.5
2515.9
2515.8
2520.9
2520.4
2523.1
100
75
100
50
75
50
39996
40020
39992
40043
40014
40041
2530.6
2533
2530.2
2535.3
2532.4
2535.1
139.4
139.5
139.8
139.7
140.1
139.9
50
50
50
50
50
50
41540
41540
41540
41540
41540
41540
2685
2685
2685
2685
2685
2685
50
100
100
39705
39750
39750
2501.5
2506
2506
100
50
100
39849
39894
39948
2515.9
2520.4
2525.8
100
100
50
40047
40038
40092
2535.7
2534.8
2540.2
134.3
135.2
134.8
50
50
50
41540
41540
41540
2685
2685
2685
75
75
100
50
50
75
75
100
100
39728
39728
39750
39705
39705
39728
39728
39750
39750
2503.8
2503.8
2506
2501.5
2501.5
2503.8
2503.8
2506
2506
75
100
75
75
100
50
100
50
75
39878
39899
39921
39825
39849
39848
39899
39894
39921
2518.8
2520.9
2523.1
2513.5
2515.9
2515.8
2520.9
2520.4
2523.1
100
75
75
100
75
100
50
75
50
40049
40070
40071
39996
40020
39992
40043
40014
40041
2535.9
2538
2538.1
2530.6
2533
2530.2
2535.3
2532.4
2535.1
134.1
134.5
134.4
134.4
134.5
134.8
134.7
135.1
134.9
50
50
50
75
75
75
75
75
75
41540
41540
41540
41515
41515
41515
41515
41515
41515
2685
2685
2685
2682.5
2682.5
2682.5
2682.5
2682.5
2682.5
75
100
100
50
100
100
50
50
75
75
100
100
39728
39750
39750
39705
39750
39750
39705
39705
39728
39728
39750
39750
2503.8
2506
2506
2501.5
2506
2506
2501.5
2501.5
2503.8
2503.8
2506
2506
100
75
100
100
50
100
75
100
50
100
50
75
39899
39921
39948
39849
39894
39948
39825
39849
39848
39899
39894
39921
2520.9
2523.1
2525.8
2515.9
2520.4
2525.8
2513.5
2515.9
2515.8
2520.9
2520.4
2523.1
100
100
75
100
100
50
100
75
100
50
75
50
40097
40092
40119
40047
40038
40092
39996
40020
39992
40043
40014
40041
2540.7
2540.2
2542.9
2535.7
2534.8
2540.2
2530.6
2533
2530.2
2535.3
2532.4
2535.1
129.3
129.8
129.6
129.3
130.2
129.8
134.4
129.5
129.8
129.7
130.1
129.9
50
50
50
75
75
75
100
100
100
100
100
100
41540
41540
41540
41515
41515
41515
41490
41490
41490
41490
41490
41490
2685
2685
2685
2682.5
2682.5
2682.5
2680
2680
2680
2680
2680
2680
100
50
100
100
39750
39705
39750
39750
2506
2501.5
2506
2506
100
100
50
100
39948
39849
39894
39948
2525.8
2515.9
2520.4
2525.8
100
100
100
50
40146
40047
40038
40092
2545.6
2535.7
2534.8
2540.2
124.4
124.3
125.2
124.8
50
100
100
100
41540
41490
41490
41490
2685
2680
2680
2680
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
75+75+
75+100
75+75+
100+100
75+100+
100+100
Note 1:
106
ETSI TS 136 508 V15.5.0 (2019-07)
75
75
100
39728
39728
39750
2503.8
2503.8
2506
75
100
75
39878
39899
39921
2518.8
2520.9
2523.1
100
75
75
40049
40070
40071
2535.9
2538
2538.1
129.1
129.5
129.4
75
75
75
41515
41515
41515
2682.5
2682.5
2682.5
75
100
100
75
75
100
39728
39750
39750
39728
39728
39750
2503.8
2506
2506
2503.8
2503.8
2506
100
75
100
75
100
75
39899
39921
39948
39878
39899
39921
2520.9
2523.1
2525.8
2518.8
2520.9
2523.1
100
100
75
100
75
75
40097
40092
40119
40049
40070
40071
2540.7
2540.2
2542.9
2535.9
2538
2538.1
124.3
124.8
124.6
124.1
124.5
124.4
75
75
75
100
100
100
41515
41515
41515
41490
41490
41490
2682.5
2682.5
2682.5
2680
2680
2680
100
75
100
100
39750
39728
39750
39750
2506
2503.8
2506
2506
100
100
75
100
39948
39899
39921
39948
2525.8
2520.9
2523.1
2525.8
100
100
100
75
40146
40097
40092
40119
2545.6
2540.7
2540.2
2542.9
119.4
119.3
119.8
119.6
75
100
100
100
41515
41490
41490
41490
2682.5
2680
2680
2680
100
39948
2525.8
100
40146
2545.6
114.4
100
41490
2680
100+100+
100+100
100
39750
2506
Carriers in increasing frequency order.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
107
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.9A-9: Test frequencies for CA_41E
Range
Low
CC-Combo /
NRB_agg
[RB]
75+75+75+100
75+75+100+100
High
Note 1:
CC3
Note1
CC4
Note1
BW
[RB]
75
75
100
75
100
75
NUL/DL
39875
39725
39900
39925
39900
39925
fUL/DL
[MHz]
2518.5
2518.5
2521.0
2523.5
2521.0
2523.5
BW
[RB]
75
100
75
75
100
100
NUL/DL
40025
40050
40075
40075
40100
40100
fUL/DL
[MHz]
2533.5
2536.0
2538.5
2538.5
2541.0
2541.0
BW
[RB]
100
100
100
100
100
100
NUL/DL
40200
40250
40250
40250
40300
40300
fUL/DL
[MHz]
2551.0
2556.0
2556.0
2556.0
2561.0
2561.0
100 39750 2506.0
100 39750 2506.0
75
40370 2568.0
75
40345 2565.5
75
40345 2565.5
100 40370 2568.0
75+100+100+100
75
40320 2563.0
100 40345 2565.5
100 40345 2565.5
100+100+100+100 100 40320 2563.0
75+75+75+100
75
41015 2632.5
75+75+100+100
75
40965 2627.5
75
40965 2627.5
100 40990 2630.0
75+100+100+100
75
40915 2622.5
100 40940 2625.0
100 40940 2625.0
100+100+100+100 100 40890 2620.0
Carriers in increasing frequency order.
100
100
75
75
100
75
100
75
100
100
75
75
100
75
100
75
100
100
39950
39950
40520
40495
40520
40545
40495
40520
40545
40520
41165
41115
41140
41165
41090
41115
41140
41090
2526.0
2526.0
2583.0
2580.5
2583.0
2585.5
2580.5
2583.0
2585.5
2583.0
2647.5
2642.5
2645.0
2647.5
2640.0
2642.5
2645.0
2640.0
75
100
75
100
75
75
100
100
75
100
75
100
75
75
100
100
75
100
40125
40150
40670
40670
40695
40695
40695
40695
40720
40720
41315
41290
41315
41315
41290
41290
41315
41290
2543.5
2546.0
2598.0
2598.0
2600.5
2600.5
2600.5
2600.5
2603.0
2603.0
2662.5
2660.0
2662.5
2662.5
2660.0
2660.0
2662.5
2660.0
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
40300
40350
40845
40870
40870
40870
40895
40895
40895
40920
41490
41490
41490
41490
41490
41490
41490
41490
2561.0
2566.0
2615.5
2618.0
2618.0
2618.0
2620.5
2620.5
2620.5
2623.0
2680.0
2680.0
2680.0
2680.0
2680.0
2680.0
2680.0
2680.0
100+100+100+100
75+75+75+100
75+75+100+100
BW
[RB]
75
75
75
100
75
100
CC2
Note1
fUL/DL
[MHz]
2503.5
2503.5
2503.5
2506.0
2503.5
2506.0
75+100+100+100
Mid
CC1
Note1
NUL/DL
39725
39725
39725
39750
39725
39750
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
108
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.9A-10: Test frequencies for CA_41F
Range
Low
Mid
High
Note 1:
CC-Combo /
NRB_agg
[RB]
50+75+100+100+100
50+100+100+100+100
75+75+100+100+100
75+100+100+100+1100
CC1
Note1
BW
[RB] NUL/DL
50
39705
50
39705
75
39728
75
39728
100 39750
100+100+100+100+100 100 39750
50+75+100+100+100
50
40254
50+100+100+100+100
50
40229
75+75+100+100+100
75
40250
75+100+100+100+1100
75
40226
100 40251
100+100+100+100+100 100 40224
50+75+100+100+100
50
40803
50+100+100+100+100
50
40752
75+75+100+100+100
75
40773
75+100+100+100+1100
75
40725
100 40752
100+100+100+100+100 100 40698
Carriers in increasing frequency order.
CC2
Note1
fUL/DL
[MHz]
2501.5
2501.5
2503.8
2503.8
2506
2506
2556.4
2553.9
2556
2553.6
2556.1
2553.4
2611.3
2606.2
2608.3
2603.5
2606.2
2600.8
BW
[RB]
75
100
75
100
75
100
75
100
75
100
75
100
75
100
75
100
75
100
NUL/DL
39825
39849
39878
39899
39921
39948
40374
40373
40400
40397
40422
40422
40923
40896
40923
40896
40923
40896
CC3
Note1
fUL/DL
[MHz]
2513.5
2515.9
2518.8
2520.9
2523.1
2525.8
2568.4
2568.3
2571
2570.7
2573.2
2573.2
2623.3
2620.6
2623.3
2620.6
2623.3
2620.6
ETSI
BW
[RB]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
NUL/DL
39996
40047
40049
40097
40092
40146
40545
40571
40571
40595
40593
40620
41094
41094
41094
41094
41094
41094
CC4
Note1
fUL/DL
[MHz]
2530.6
2535.7
2535.9
2540.7
2540.2
2545.6
2585.5
2588.1
2588.1
2590.5
2590.3
2593
2640.4
2640.4
2640.4
2640.4
2640.4
2640.4
BW
[RB]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
NUL/DL
40194
40245
40247
40295
40290
40344
40743
40769
40769
40793
40791
40818
41292
41292
41292
41292
41292
41292
CC5
Note1
fUL/DL
[MHz]
2550.4
2555.5
2555.7
2560.5
2560
2565.4
2605.3
2607.9
2607.9
2610.3
2610.1
2612.8
2660.2
2660.2
2660.2
2660.2
2660.2
2660.2
BW
[RB]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
NUL/DL
40392
40443
40445
40493
40488
40542
40941
40967
40967
40991
40989
41016
41490
41490
41490
41490
41490
41490
fUL/DL
[MHz]
2570.2
2575.3
2575.5
2580.3
2579.8
2585.2
2625.1
2627.7
2627.7
2630.1
2629.9
2632.6
2680
2680
2680
2680
2680
2680
3GPP TS 36.508 version 15.5.0 Release 15
109
ETSI TS 136 508 V15.5.0 (2019-07)
4.3.1.2.10 TDD reference test frequencies for Operating Band 42
Table 4.3.1.2.10-1: Test frequencies for E-UTRA channel bandwidth for operating band 42
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
EARFCN
41615
41640
41665
41690
42590
43565
43540
43515
43490
Frequency (UL and DL)
[MHz]
3402.5
3405
3407.5
3410
3500
3597.5
3595
3592.5
3590
4.3.1.2.10ATDD reference test frequencies for CA in operating band 42
Table 4.3.1.2.10A-1: Test frequencies for CA_42C
Range
Low
Mid
High
Note 1:
CC-Combo
/
NRB_agg
[RB]
CC1
Note1
BW
[RB]
NUL/DL
25+100
25
41623
100
41690
50+100
50
41645
100
41690
75+100
75
41668
100
41690
100+100
100
41690
25+100
25
42498
100
42565
50+100
50
42496
100
42541
75+100
75
42493
100
42516
100+100
100
42491
25+100
25
43373
100
43440
50+100
50
43346
100
43391
75+100
75
43319
100
43341
100+100
100
43292
Carriers in increasing frequency order.
ETSI
CC2
Note1
fUL/DL
[MHz]
3403.3
3410
3405.5
3410
3407.8
3410
3410
3490.8
3497.5
3490.6
3495.1
3490.3
3492.6
3490.1
3578.3
3585
3575.6
3580.1
3572.9
3575.1
3570.2
BW
[RB]
100
25
100
50
100
75
100
100
25
100
50
100
75
100
100
25
100
50
100
75
100
NUL/DL
41740
41807
41789
41834
41839
41861
41888
42615
42682
42640
42685
42664
42687
42689
43490
43557
43490
43535
43490
43512
43490
fUL/DL
[MHz]
3415
3421.7
3419.9
3424.4
3424.9
3427.1
3429.8
3502.5
3509.2
3505
3509.5
3507.4
3509.7
3509.9
3590
3596.7
3590
3594.5
3590
3592.2
3590
3GPP TS 36.508 version 15.5.0 Release 15
110
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.10A-2: Test frequencies for CA_42A-42A
Test
Frequency
ID
CCCombo
/
NRB_agg
[RB]
CC1
Note1
CC2
Note1
Wgap
[MHz]
BW
fUL/DL
BW
[RB]
NUL/DL
[MHz]
[RB]
25+25
25
41615 3402.5
190
25
25
41615 3402.5
185
50
25+50
50
41640
3405
185
25
25+75
25
41615 3402.5
180
75
75
41665 3407.5
180
25
50
41640
3405
180
50
50+50
25
41615 3402.5
175
100
25+100
100
41690
3410
175
25
Max WGap
50+75
50
41640
3405
175
75
75
41665 3407.5
175
50
50
41640
3405
170
100
50+100
100
41690
3410
170
50
75
41665 3407.5
165
100
75+100
100
41690
3410
165
75
100
41690
3410
160
100
100+100
100
42590
3500
70
100
Refsens2
100+100
Note 1: Carriers in increasing frequency order.
Note 2: Test point derived with regard to REFSENS requirements.
NUL/DL
43565
43540
43565
43515
43565
43540
43490
43565
43515
43540
43490
43540
43490
43515
43490
43490
fUL/DL
[MHz]
3597.5
3595
3597.5
3592.5
3597.5
3595
3590
3597.5
3592.5
3595
3590
3595
3590
3592.5
3590
3590
Table 4.3.1.2.10A-3: Test frequencies for CA_42D
Range
Low
Mid
High
Note 1:
CC-Combo /
NRB_agg
[RB]
CC1
Note1
CC2
Note1
BW
fUL/DL
[RB]
NUL/DL
[MHz]
25+100+100
25
41623
3403.3
100
41690
3410
50+100+100
50
41645
3405.5
100
41690
3410
75+100+100
75
41668
3407.8
100
41690
3410
100+100+100
100
41690
3410
25+100+100
25
42399
3480.9
100
42466
3487.6
50+100+100
50
42397
3480.7
100
42442
3485.2
75+100+100
75
42394
3480.4
100
42417
3482.7
100+100+100
100
42392
3480.2
25+100+100
25
43175
3558.5
100
43242
3565.2
50+100+100
50
43148
3555.8
100
43193
3560.3
75+100+100
75
43121
3553.1
100
43143
3555.3
100+100+100
100
43094
3550.4
Carriers in increasing frequency order.
ETSI
BW
[RB]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
NUL/DL
41740
41888
41789
41888
41839
41888
41888
42516
42664
42541
42640
42565
42615
42590
43292
43440
43292
43391
43292
43341
43292
CC3
Note1
fUL/DL
[MHz]
3415
3429.8
3419.9
3429.8
3424.9
3429.8
3429.8
3492.6
3507.4
3495.1
3505
3497.5
3502.5
3500
3570.2
3585
3570.2
3580.1
3570.2
3575.1
3570.2
BW
[RB]
100
25
100
50
100
75
100
100
25
100
50
100
75
100
100
25
100
50
100
75
100
NUL/DL
41938
42005
41987
42032
42037
42059
42086
42714
42781
42739
42784
42763
42786
42788
43490
43557
43490
43535
43490
43512
43490
fUL/DL
[MHz]
3434.8
3441.5
3439.7
3444.2
3444.7
3446.9
3449.6
3512.4
3519.1
3514.9
3519.4
3517.3
3519.6
3519.8
3590
3596.7
3590
3594.5
3590
3592.2
3590
3GPP TS 36.508 version 15.5.0 Release 15
111
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.10A-4: Test frequencies for CA_42C-42A
Test
Frequency
ID
CC-Combo /
NRB_agg
[RB]
25+25+100
CC1
Note1
BW
[RB]
NUL/DL
25
41623
100
41690
25+50+100
25
41623
50
41645
100
41690
100
41690
25+75+100
25
41623
75
41668
100
41690
100
41690
50+50+100
50
41645
100
41690
25+100+100
25
41623
100
41690
Max WGap
100
41690
50+75+100
50
41645
75
41668
100
41690
100
41690
50+100+100
50
41645
100
41690
100
41690
75+75+100
75
41668
100
41690
75+100+100
75
41668
100
41690
100
41690
100+100+100
100
41690
Note 1: Carriers in increasing frequency order.
CC2
Note1
fUL/DL
[MHz]
3403.3
3410
3403.3
3405.5
3410
3410
3403.3
3407.8
3410
3410
3405.5
3410
3403.3
3410
3410
3405.5
3407.8
3410
3410
3405.5
3410
3410
3407.8
3410
3407.8
3410
3410
3410
ETSI
BW
[RB
100
25
100
100
25
50
100
100
25
75
100
50
100
25
100
100
100
50
75
100
50
100
100
75
100
75
100
100
NUL/DL
41740
41807
41740
41789
41807
41834
41740
41839
41807
41861
41789
41834
41740
41807
41888
41789
41839
41834
41861
41789
41834
41888
41839
41861
41839
41861
41888
41888
Wgap
[MHz]
fUL/DL
[MHz]
3415
3421.7
3415
3419.9
3421.7
3424.4
3415
3424.9
3421.7
3427.1
3419.9
3424.4
3415
3421.7
3429.8
3419.9
3424.9
3424.4
3427.1
3419.9
3424.4
3429.8
3424.9
3427.1
3424.9
3427.1
3429.8
3429.8
170
170.8
165
165.1
165.8
165.6
160
160.1
160.8
160.4
160.1
160.6
155
155.8
155.2
155.1
155.1
155.6
155.4
150.1
150.6
150.2
150.1
150.4
145.1
145.4
145.2
140.2
CC3
Note1
BW
[RB]
25
25
50
25
50
25
75
25
75
25
50
50
100
100
25
75
50
75
50
100
100
50
75
75
100
100
75
100
NUL/DL
43565
43565
43540
43565
43540
43565
43515
43565
43515
43565
43540
43540
43490
43490
43565
43515
43540
43515
43540
43490
43490
43540
43515
43515
43490
43490
43515
43490
fUL/DL
[MHz]
3597.5
3597.5
3595
3597.5
3595
3597.5
3592.5
3597.5
3592.5
3597.5
3595
3595
3590
3590
3597.5
3592.5
3595
3592.5
3595
3590
3590
3595
3592.5
3592.5
3590
3590
3592.5
3590
3GPP TS 36.508 version 15.5.0 Release 15
112
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.10A-5: Test frequencies for CA_42A-42C
Test
Frequency
ID
CC-Combo /
NRB_agg
[RB]
25+25+100
CC1
Note1
BW
[RB]
NUL/DL
25
41615
25
41615
25+50+100
25
41615
25
41615
50
41640
50
41640
25+75+100
25
41615
25
41615
75
41665
75
41665
50+50+100
50
41640
50
41640
25+100+100
25
41615
100
41690
Max WGap
100
41690
50+75+100
50
41640
50
41640
75
41665
75
41665
50+100+100
50
41640
100
41690
100
41690
75+75+100
75
41665
75
41665
75+100+100
75
41665
100
41690
100
41690
100+100+100
100
41690
Note 1: Carriers in increasing frequency order.
Wgap
[MHz]
fUL/DL
[MHz]
3402.5
3402.5
3402.5
3402.5
3405
3405
3402.5
3402.5
3407.5
3407.5
3405
3405
3402.5
3410
3410
3405
3405
3407.5
3407.5
3405
3410
3410
3407.5
3407.5
3407.5
3410
3410
3410
ETSI
170.8
170
165.6
165.1
165.8
165
160.4
160.1
160.8
160
160.6
160.1
155.2
155.8
155
155.4
155.1
155.6
155.1
150.2
150.6
150.1
150.4
150.1
145.2
145.4
145.1
140.2
CC2
Note1
BW
[RB
25
100
50
100
25
100
75
100
25
100
50
100
100
25
100
75
100
50
100
100
50
100
75
100
100
75
100
100
NUL/DL
43373
43440
43346
43391
43373
43440
43319
43341
43373
43440
43346
43391
43292
43373
43440
43319
43341
43346
43391
43292
43346
43391
43319
43341
43292
43319
43341
43292
CC3
Note1
fUL/DL
[MHz]
3578.3
3585
3575.6
3580.1
3578.3
3585
3572.9
3575.1
3578.3
3585
3575.6
3580.1
3570.2
3578.3
3585
3572.9
3575.1
3575.6
3580.1
3570.2
3575.6
3580.1
3572.9
3575.1
3570.2
3572.9
3575.1
3570.2
BW
[RB]
100
25
100
50
100
25
100
75
100
25
100
50
100
100
25
100
75
100
50
100
100
50
100
75
100
100
75
100
NUL/DL
43490
43557
43490
43535
43490
43557
43490
43512
43490
43557
43490
43535
43490
43490
43557
43490
43512
43490
43535
43490
43490
43535
43490
43512
43490
43490
43512
43490
fUL/DL
[MHz]
3590
3596.7
3590
3594.5
3590
3596.7
3590
3592.2
3590
3596.7
3590
3594.5
3590
3590
3596.7
3590
3592.2
3590
3594.5
3590
3590
3594.5
3590
3592.2
3590
3590
3592.2
3590
3GPP TS 36.508 version 15.5.0 Release 15
113
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.10A-6: Test frequencies for CA_42C-42C
Test
frequency
ID
CCCombo /
NRB_agg
[RB]
BW
[RB]
25+25+
100+100
25+50+
100+100
25+75+
100+100
25+100+
100+100
50+50+
100+100
Max Wgap
CC1
CC2
Wgap
CC3
CC4
Note1
Note1
[MHz]
Note1
Note1
NUL/DL
fUL/DL
BW
[MHz]
[RB]
NUL/DL
fUL/DL
BW
[MHz]
[RB]
NUL/DL
fUL/DL
BW
[MHz]
[RB]
NUL/DL
fUL/DL
[MHz]
25
100
25
100
41623
41690
41623
41690
3403.3
3410
3403.3
3410
100
25
100
25
41740
41807
41740
41807
3415
3421.7
3415
3421.7
150.8
150.8
150
151.6
25
100
100
25
43373
43440
43440
43373
3578.3
3585
3585
3578.3
100
25
25
100
43490
43557
43557
43490
3590
3596.7
3596.7
3590
25
100
25
100
50
100
50
100
41623
41690
41623
41690
41645
41690
41645
41690
3403.3
3410
3403.3
3410
3405.5
3410
3405.5
3410
100
25
100
25
100
50
100
50
41740
41807
41740
41807
41789
41834
41789
41834
3415
3421.7
3415
3421.7
3419.9
3424.4
3419.9
3424.4
145.6
145.9
145.1
146.4
145.9
145.6
145.1
146.4
50
100
100
50
25
100
100
25
43346
43391
43391
43346
43373
43440
43440
43373
3575.6
3580.1
3580.1
3575.6
3578.3
3585
3585
3578.3
100
50
50
100
100
25
25
100
43490
43535
43535
43490
43490
43557
43557
43490
3590
3594.5
3594.5
3590
3590
3596.7
3596.7
3590
25
100
25
100
75
100
75
100
41623
41690
41623
41690
41668
41690
41668
41690
3403.3
3410
3403.3
3410
3407.8
3410
3407.8
3410
100
25
100
25
100
75
100
75
41740
41807
41740
41807
41839
41861
41839
41861
3415
3421.7
3415
3421.7
3424.9
3427.1
3424.9
3427.1
140.4
140.9
140.1
141.2
140.9
140.4
140.1
141.2
75
100
100
75
25
100
100
25
43319
43341
43341
43319
43373
43440
43440
43373
3572.9
3575.1
3575.1
3572.9
3578.3
3585
3585
3578.3
100
75
75
100
100
25
25
100
43490
43512
43512
43490
43490
43557
43557
43490
3590
3592.2
3592.2
3590
3590
3596.7
3596.7
3590
25
100
100
100
41623
41690
41690
41690
3403.3
3410
3410
3410
100
25
100
100
41740
41807
41888
41888
3415
3421.7
3429.8
3429.8
135.2
136
136
135.2
100
100
25
100
43292
43292
43373
43440
3570.2
3570.2
3578.3
3585
100
100
100
25
43490
43490
43490
43557
3590
3590
3590
3596.7
50
100
50
100
41645
41690
41645
41690
3405.5
3410
3405.5
3410
100
50
100
50
41789
41834
41789
41834
3419.9
3424.4
3419.9
3424.4
140.7
140.7
140.2
141.2
50
100
100
50
43346
43391
43391
43346
3575.6
3580.1
3580.1
3575.6
100
50
50
100
43490
43535
43535
43490
3590
3594.5
3594.5
3590
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
50+75+
100+100
50+100+
100+100
75+75+
100+100
75+100+
100+100
100+100+
100+100
Note 1:
114
ETSI TS 136 508 V15.5.0 (2019-07)
50
100
50
100
75
100
75
100
41645
41690
41645
41690
41668
41690
41668
41690
3405.5
3410
3405.5
3410
3407.8
3410
3407.8
3410
100
50
100
50
100
75
100
75
41789
41834
41789
41834
41839
41861
41839
41861
3419.9
3424.4
3419.9
3424.4
3424.9
3427.1
3424.9
3427.1
135.5
135.7
135.2
136
135.7
135.5
135.2
136
75
100
100
75
50
100
100
50
43319
43341
43341
43319
43346
43391
43391
43346
3572.9
3575.1
3575.1
3572.9
3575.6
3580.1
3580.1
3575.6
100
75
75
100
100
50
50
100
43490
43512
43512
43490
43490
43535
43535
43490
3590
3592.2
3592.2
3590
3590
3594.5
3594.5
3590
50
100
100
100
41645
41690
41690
41690
3405.5
3410
3410
3410
100
50
100
100
41789
41834
41888
41888
3419.9
3424.4
3429.8
3429.8
130.3
130.8
130.8
130.3
100
100
50
100
43292
43292
43346
43391
3570.2
3570.2
3575.6
3580.1
100
100
100
50
43490
43490
43490
43535
3590
3590
3590
3594.5
75
100
75
100
41668
41690
41668
41690
3407.8
3410
3407.8
3410
100
75
100
75
41839
41861
41839
41861
3424.9
3427.1
3424.9
3427.1
130.5
130.5
130.2
130.8
75
100
100
75
43319
43341
43341
43319
3572.9
3575.1
3575.1
3572.9
100
75
75
100
43490
43512
43512
43490
3590
3592.2
3592.2
3590
75
100
100
100
41668
41690
41690
41690
3407.8
3410
3410
3410
100
75
100
100
41839
41861
41888
41888
3424.9
3427.1
3429.8
3429.8
125.3
125.6
125.6
125.3
100
100
75
100
43292
43292
43319
43341
3570.2
3570.2
3572.9
3575.1
100
100
100
75
43490
43490
43490
43512
3590
3590
3590
3592.2
100
41690
3410
100
41888
3429.8
120.4
100
43292
3570.2
100
43490
3590
Carriers in increasing frequency order.
Table 4.3.1.2.10A-7: Test frequencies for CA_42A-42D
Test
frequency
ID
CCCombo /
NRB_agg
[RB]
BW
[RB]
25+25+
100+100
Max Wgap
25+50+
100+100
25
25
25
25
CC1
Wgap
CC2
CC3
CC4
Note1
[MHz]
Note1
Note1
Note1
NUL/DL
41615
41615
41615
41615
fUL/DL
BW
[MHz]
[RB]
3402.5
3402.5
3402.5
3402.5
151
150.2
145.8
145.3
25
100
50
100
NUL/DL
43175
43242
43148
43193
ETSI
fUL/DL
BW
[MHz]
[RB]
3558.5
3565.2
3555.8
3560.3
100
100
100
100
NUL/DL
43292
43440
43292
43391
fUL/DL
BW
[MHz]
[RB]
3570.2
3585
3570.2
3580.1
100
25
100
50
NUL/DL
43490
43557
43490
43535
fUL/DL
[MHz]
3590
3596.7
3590
3594.5
3GPP TS 36.508 version 15.5.0 Release 15
25+75+
100+100
25+100+
100+100
50+50+
100+100
50+75+
100+100
50+100+
100+100
75+75+
100+100
75+100+
100+100
Note 1:
115
ETSI TS 136 508 V15.5.0 (2019-07)
50
50
41640
41640
3405
3405
146
145.2
25
100
43175
43242
3558.5
3565.2
100
100
43292
43440
3570.2
3585
100
25
43490
43557
3590
3596.7
25
25
75
75
41615
41615
41665
41665
3402.5
3402.5
3407.5
3407.5
140.6
140.3
141
140.2
75
100
25
100
43121
43143
43175
43242
3553.1
3555.3
3558.5
3565.2
100
100
100
100
43292
43341
43292
43440
3570.2
3575.1
3570.2
3585
100
75
100
25
43490
43512
43490
43557
3590
3592.2
3590
3596.7
25
100
100
41615
41690
41690
3402.5
3410
3410
135.4
136
135.2
100
25
100
43094
43175
43242
3550.4
3558.5
3565.2
100
100
100
43292
43292
43440
3570.2
3570.2
3585
100
100
25
43490
43490
43557
3590
3590
3596.7
50
50
41640
41640
3405
3405
140.8
140.3
50
100
43148
43193
3555.8
3560.3
100
100
43292
43391
3570.2
3580.1
100
50
43490
43535
3590
3594.5
50
50
75
75
41640
41640
41665
41665
3405
3405
3407.5
3407.5
135.6
135.3
135.8
135.3
75
100
50
100
43121
43143
43148
43193
3553.1
3555.3
3555.8
3560.3
100
100
100
100
43292
43341
43292
43391
3570.2
3575.1
3570.2
3580.1
100
75
100
50
43490
43512
43490
43535
3590
3592.2
3590
3594.5
50
100
100
41640
41690
41690
3405
3410
3410
130.4
130.8
130.3
100
50
100
43094
43148
43193
3550.4
3555.8
3560.3
100
100
100
43292
43292
43391
3570.2
3570.2
3580.1
100
100
50
43490
43490
43535
3590
3590
3594.5
75
75
41665
41665
3407.5
3407.5
130.6
130.3
75
100
43121
43143
3553.1
3555.3
100
100
43292
43341
3570.2
3575.1
100
75
43490
43512
3590
3592.2
75
100
100
41665
41690
41690
3407.5
3410
3410
125.4
125.6
125.3
100
75
100
43094
43121
43143
3550.4
3553.1
3555.3
100
100
100
43292
43292
43341
3570.2
3570.2
3575.1
100
100
75
43490
43490
43512
3590
3590
3592.2
120.4
100
43094
3550.4
100
43292
3570.2
100
43490
3590
100+100+
100+100
100
41690
3410
Carriers in increasing frequency order.
Table 4.3.1.2.10A-8: Test frequencies for CA_42D-42A
Test
frequency
ID
CCCombo /
NRB_agg
[RB]
BW
[RB]
CC1
CC2
CC3
Wgap
CC4
Note1
Note1
Note1
[MHz]
Note1
NUL/DL
fUL/DL
BW
[MHz]
[RB]
NUL/DL
fUL/DL
BW
[MHz]
[RB]
ETSI
NUL/DL
fUL/DL
BW
[MHz]
[RB]
NUL/DL
fUL/DL
[MHz]
3GPP TS 36.508 version 15.5.0 Release 15
25+25+
100+100
25+50+
100+100
25+75+
100+100
25+100+
100+100
50+50+
100+100
50+75+
100+100
50+100+
100+100
75+75+
100+100
75+100+
100+100
116
ETSI TS 136 508 V15.5.0 (2019-07)
25
100
41623
41690
3403.3
3410
100
100
41740
41888
3415
3429.8
100
25
41938
42005
3434.8
3441.5
150.2
151
25
25
43565
43565
3597.5
3597.5
50
100
25
100
41645
41690
41623
41690
3405.5
3410
3403.3
3410
100
100
100
100
41789
41888
41740
41888
3419.9
3429.8
3415
3429.8
100
50
100
25
41987
42032
41938
42005
3439.7
3444.2
3434.8
3441.5
145.3
145.8
145.2
146
25
25
50
50
43565
43565
43540
43540
3597.5
3597.5
3595
3595
75
100
25
100
41668
41690
41623
41690
3407.8
3410
3403.3
3410
100
100
100
100
41839
41888
41740
41888
3424.9
3429.8
3415
3429.8
100
75
100
25
42037
42059
41938
42005
3444.7
3446.9
3434.8
3441.5
140.3
140.6
140.2
141
25
25
75
75
43565
43565
43515
43515
3597.5
3597.5
3592.5
3592.5
100
25
100
41690
41623
41690
3410
3403.3
3410
100
100
100
41888
41740
41888
3429.8
3415
3429.8
100
100
25
42086
41938
42005
3449.6
3434.8
3441.5
135.4
135.2
136
25
100
100
43565
43490
43490
3597.5
3590
3590
50
100
41645
41690
3405.5
3410
100
100
41789
41888
3419.9
3429.8
100
50
41987
42032
3439.7
3444.2
140.3
140.8
50
50
43540
43540
3595
3595
75
100
50
100
41668
41690
41645
41690
3407.8
3410
3405.5
3410
100
100
100
100
41839
41888
41789
41888
3424.9
3429.8
3419.9
3429.8
100
75
100
50
42037
42059
41987
42032
3444.7
3446.9
3439.7
3444.2
135.3
135.6
135.3
135.8
50
50
75
75
43540
43540
43515
43515
3595
3595
3592.5
3592.5
100
50
100
41690
41645
41690
3410
3405.5
3410
100
100
100
41888
41789
41888
3429.8
3419.9
3429.8
100
100
50
42086
41987
42032
3449.6
3439.7
3444.2
130.4
130.3
130.8
50
100
100
43540
43490
43490
3595
3590
3590
75
100
41668
41690
3407.8
3410
100
100
41839
41888
3424.9
3429.8
100
75
42037
42059
3444.7
3446.9
130.3
130.6
75
75
43515
43515
3592.5
3592.5
100
75
100
41690
41668
41690
3410
3407.8
3410
100
100
100
41888
41839
41888
3429.8
3424.9
3429.8
100
100
75
42086
42037
42059
3449.6
3444.7
3446.9
125.4
125.3
125.6
75
100
100
43515
43490
43490
3592.5
3590
3590
100
41888
3429.8
100
42086
3449.6
120.4
100
43490
3590
100+100+
Max Wgap
100+100
100
41690
3410
Note 1: Carriers in increasing frequency order.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
117
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.10A-9: Test frequencies for CA_42E
Range
Low
Mid
High
Note 1:
CC-Combo /
NRB_agg
[RB]
CC1
Note1
BW
[RB]
NUL/DL
25+100+100+100
25
41623
100
41690
50+100+100+100
50
41645
100
41690
75+100+100+100
75
41668
100
41690
100+100+100+100
100
41690
25+100+100+100
25
42300
100
42367
50+100+100+100
50
42298
100
42343
75+100+100+100
75
42295
100
42318
100+100+100+100
100
42293
25+100+100+100
25
42977
100
43044
50+100+100+100
50
42950
100
42995
75+100+100+100
75
42923
100
42945
100+100+100+100
100
42896
Carriers in increasing frequency order.
CC2
Note1
fUL/DL
[MHz]
3403.3
3410
3405.5
3410
3407.8
3410
3410
3471
3477.7
3470.8
3475.3
3470.5
3472.8
3470.3
3538.7
3545.4
3536
3540.5
3533.3
3535.5
3530.6
BW
[RB]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
CC3
Note1
fUL/DL
[MHz]
3415
3429.8
3419.9
3429.8
3424.9
3429.8
3429.8
3482.7
3497.5
3485.2
3495.1
3487.6
3492.6
3490.1
3550.4
3565.2
3550.4
3560.3
3550.4
3555.3
3550.4
NUL/DL
41740
41888
41789
41888
41839
41888
41888
42417
42565
42442
42541
42466
42516
42491
43094
43242
43094
43193
43094
43143
43094
ETSI
BW
[RB]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
NUL/DL
41938
42086
41987
42086
42037
42086
42086
42615
42763
42640
42739
42664
42714
42689
43292
43440
43292
43391
43292
43341
43292
CC4
Note1
fUL/DL
[MHz]
3434.8
3449.6
3439.7
3449.6
3444.7
3449.6
3449.6
3502.5
3517.3
3505
3514.9
3507.4
3512.4
3509.9
3570.2
3585
3570.2
3580.1
3570.2
3575.1
3570.2
BW
[RB]
100
25
100
50
100
75
100
100
25
100
50
100
75
100
100
25
100
50
100
75
100
NUL/DL
42136
42203
42185
42230
42235
42257
42284
42813
42880
42838
42883
42862
42885
42887
43490
43557
43490
43535
43490
43512
43490
fUL/DL
[MHz]
3454.6
3461.3
3459.5
3464
3464.5
3466.7
3469.4
3522.3
3529
3524.8
3529.3
3527.2
3529.5
3529.7
3590
3596.7
3590
3594.5
3590
3592.2
3590
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.2.11
118
ETSI TS 136 508 V15.5.0 (2019-07)
TDD reference test frequencies for Operating Band 43
Table 4.3.1.2.11-1: Test frequencies for E-UTRA channel bandwidth for operating band 43
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.2.12
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
EARFCN
43615
43640
43665
43690
44590
45565
45540
45515
45490
Frequency (UL and DL)
[MHz]
3602.5
3605
3607.5
3610
3700
3797.5
3795
3792.5
3790
TDD reference test frequencies for Operating Band 44
Table 4.3.1.2.12-1: Test frequencies for E-UTRA channel bandwidth for operating band 44
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.2.13
Bandwidth
[MHz]
3
5
10
15
20
3/5/10/15/20
3
5
10
15
20
EARFCN
45605
45615
45640
45665
45690
46090
46575
46565
46540
46515
46490
Frequency (UL and DL)
[MHz]
704.5
705.5
708
710.5
713
753
801.5
800.5
798
795.5
793
TDD reference test frequencies for Operating Band 45
Table 4.3.1.2.13-1: Test frequencies for E-UTRA channel bandwidth for operating band 45
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
ETSI
EARFCN
46615
46640
46665
46690
46690
46765
46740
46715
46690
Frequency (UL and DL)
[MHz]
1449.5
1452
1454.5
1457
1457
1464.5
1462
1459.5
1457
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.2.14
119
ETSI TS 136 508 V15.5.0 (2019-07)
TDD reference test frequencies for Operating Band 46
Table 4.3.1.2.14-1: Test frequencies for E-UTRA channel bandwidth for operating band 46
Test Frequency ID
Bandwidth
EARFCN
Frequency (UL and DL)
[MHz]
[MHz]
Low Range
20
46890
5160
Mid Range
20
50690
5540
High Range
20
54340
5905
NOTE 1: In Rel-13, restricted to E-UTRA operation when carrier aggregation is
configured. The downlink operating band is paired with the uplink
operating band (external) of the carrier aggregation configuration that is
supporting the configured Pcell.
4.3.1.2.14A
TDD reference test frequencies for CA in operating Band 46
Table 4.3.1.2.14A-1: Test frequencies for CA_46C
Range
CC-Combo
/
NRB_agg
[RB]
CC1
Note1
CC2
Note1
BW
fUL/DL
BW
fUL/DL
[RB]
NUL/DL
[MHz]
[RB]
NUL/DL
[MHz]
Low
100+100
100
46890
5160.0
100
47088
5179.8
Mid
100+100
100
50692
5540.2
100
50890
5560
High
100+100
100
54142
5885.2
100
54340
5905
NOTE 1: Carriers in increasing frequency order.
NOTE 2: In Rel-13, restricted to E-UTRA operation when carrier aggregation is
configured. The downlink operating band is paired with the uplink operating band
(external) of the carrier aggregation configuration that is supporting the
configured Pcell.
Table 4.3.1.2.14A-2: Test frequencies for CA_46D
Range
CC-Combo /
NRB_agg
[RB]
CC1
Note1
CC2
Note1
CC3
Note1
BW
fUL/DL
BW
fUL/DL
BW
[RB]
NUL/DL
[MHz]
[RB]
NUL/DL
[MHz]
[RB]
NUL/DL
Low
100+100+100
100
46892
5160.2
100
47090
5180
100
47288
Mid
100+100+100
100
50492
5520.2
100
50690
5540
100
50888
High
100+100+100
100
53942
5865.2
100
54140
5885
100
54338
NOTE 1: Carriers in increasing frequency order.
NOTE 2: In Rel-13, restricted to E-UTRA operation when carrier aggregation is configured. The downlink
operating band is paired with the uplink operating band (external) of the carrier aggregation
configuration that is supporting the configured Pcell.
ETSI
fUL/DL
[MHz]
5199.8
5559.8
5904.8
3GPP TS 36.508 version 15.5.0 Release 15
120
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.14A-3: Test frequencies for CA_46E
Range
CC-Combo /
NRB_agg
[RB]
CC1
Note1
CC2
Note1
CC3
Note1
CC4
Note1
BW
fUL/DL
BW
fUL/DL
BW
fUL/DL
BW
fUL/DL
[RB] NUL/DL
[MHz] [RB] NUL/DL
[MHz]
[RB]
NUL/DL
[MHz]
[RB]
NUL/DL
[MHz]
Low
100+100+100+100 100
46890
5160
100
47088 5179.8
100
47289
5199.9
100
47490
5220
Mid
100+100+100+100 100
50490
5520
100
50688 5539.8
100
50889
5559.9
100
51090
5580
High
100+100+100+100 100
53740
5845
100
53941 5865.1
100
54142
5885.2
100
54340
5905
NOTE 1: Carriers in increasing frequency order.
NOTE 2: In Rel-13, restricted to E-UTRA operation when carrier aggregation is configured. The downlink operating band is paired with the
uplink operating band (external) of the carrier aggregation configuration that is supporting the configured Pcell.
Table 4.3.1.2.14A-4: Test frequencies for CA_46A-46A
Test
Frequency
ID
CCCombo
/
NRB_agg
[RB]
CC1
Note1
CC2
Note1
Wgap
[MHz]
BW
fUL/DL
BW
fUL/DL
[RB]
NUL/DL
[MHz]
[RB] NUL/DL [MHz]
100
46890
5160
745
100 54340
5905
Max WGap 100+100
NOTE 1: Carriers in increasing frequency order.
NOTE 2: In Rel-13, restricted to E-UTRA operation when carrier aggregation is
configured. The downlink operating band is paired with the uplink operating
band (external) of the carrier aggregation configuration that is supporting the
configured Pcell.
4.3.1.2.15
TDD reference test frequencies for Operating Band 47
Table 4.3.1.2.15-1: Test frequencies for E-UTRA channel bandwidth for operating band 47
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
10
20
10/20
10
20
EARFCN
54590
54640
54890
55190
55140
Frequency (UL and DL)
[MHz]
5860
5865
5890
5920
5915
Table 4.3.1.2.15-2: Test frequencies for V2X_47B
Range
Low
Mid
High
Note 1:
CC-Combo /
NRB_agg
[RB]
50+50
CC1
Note1
BW
[RB]
50
NUL/DL
54590
50+50
50
54841
50+50
50
55091
Carriers in increasing frequency order.
ETSI
CC2
Note1
fUL/DL
[MHz]
5860
BW
[RB]
50
NUL/DL
54689
fUL/DL
[MHz]
5869.9
5885.1
5910.1
50
50
54940
55190
5895
5920
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.2.16
121
ETSI TS 136 508 V15.5.0 (2019-07)
TDD reference test frequencies for Operating Band 48
Table 4.3.1.2.16-1: Test frequencies for E-UTRA channel bandwidth for operating band 48
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.2.16A
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
EARFCN
55265
55290
55315
55340
55990
56715
56690
56665
56640
Frequency (UL and DL)
[MHz]
3552.5
3555.0
3557.5
3560.0
3625.0
3697.5
3695.0
3692.5
3690.0
TDD reference test frequencies for CA in operating band 48
Table 4.3.1.2.16A-1: Test frequencies for CA_48C
Range
Low
Mid
High
Note 1:
CCCombo /
NRB_agg
[RB]
CC1
Note1
BW
[RB]
NUL/DL
25+100
25
55273
100
55340
50+100
50
55295
100
55340
75+100
75
55318
100
55340
100+100
100
55340
25+100
25
55898
100
55965
50+100
50
55896
100
55941
75+100
75
55893
100
55916
100+100
100
55891
25+100
25
56523
100
56590
50+100
50
56496
100
56541
75+100
75
56469
100
56491
100+100
100
56442
Carriers in increasing frequency order.
ETSI
CC2
Note1
fUL/DL
[MHz]
3553.3
3560
3555.5
3560
3557.8
3560
3560
3615.8
3622.5
3615.6
3620.1
3615.3
3617.6
3615.1
3678.3
3685
3675.6
3680.1
3672.9
3675.1
3670.2
BW
[RB]
100
25
100
50
100
75
100
100
25
100
50
100
75
100
100
25
100
50
100
75
100
NUL/DL
55390
55457
55439
55484
55489
55511
55538
56015
56082
56040
56085
56064
56087
56089
56640
56707
56640
56685
56640
56662
56640
fUL/DL
[MHz]
3565
3571.7
3569.9
3574.4
3574.9
3577.1
3579.8
3627.5
3634.2
3630
3634.5
3632.4
3634.7
3634.9
3690
3696.7
3690
3694.5
3690
3692.2
3690
3GPP TS 36.508 version 15.5.0 Release 15
122
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.1.2.16A-2: Test frequencies for CA_48A-48A
Test
Frequency
ID
CCCombo /
NRB_agg
[RB]
CC1
Note1
CC2
Note1
Wgap
[MHz]
BW
fUL/DL
[RB]
NUL/DL
[MHz]
25+25
25
55265 3552.5
25
55265
3552.5
25+50
50
55290
3555
25+75
25
55265 3552.5
75
55315 3557.5
50
55290
3555
50+50
25
55265 3552.5
25+100
100
55340
3560
Max WGap
50+75
50
55290
3555
75
55315 3557.5
50
55290
3555
50+100
100
55340
3560
75
55315 3557.5
75+100
100
55340
3560
100
55340
3560
100+100
Note 1: Carriers in increasing frequency order.
140
135
135
130
130
130
125
125
125
125
120
120
115
115
110
BW
[RB]
25
50
25
75
25
50
100
25
75
50
100
50
100
75
100
NUL/DL
56715
56690
56715
56665
56715
56690
56640
56715
56665
56690
56640
56690
56640
56665
56640
fUL/DL
[MHz]
3697.5
3695
3697.5
3692.5
3697.5
3695
3690
3697.5
3692.5
3695
3690
3695
3690
3692.5
3690
Table 4.3.1.2.16A-3: Test frequencies for CA_48D
Range
Low
Mid
High
Note 1:
CC-Combo /
NRB_agg
[RB]
CC1
Note1
CC2
Note1
BW
fUL/DL
[RB]
NUL/DL
[MHz]
25+100+100
25
55273
3553.3
100
55340
3560
50+100+100
50
55295
3555.5
100
55340
3560
75+100+100
75
55318
3557.8
100
55340
3560
100+100+100
100
55340
3560
25+100+100
25
55799
3605.9
100
55866
3612.6
50+100+100
50
55797
3605.7
100
55842
3610.2
75+100+100
75
55794
3605.4
100
55817
3607.7
100+100+100
100
55792
3605.2
25+100+100
25
56325
3658.5
100
56392
3665.2
50+100+100
50
56298
3655.8
100
56343
3660.3
75+100+100
75
56271
3653.1
100
56293
3655.3
100+100+100
100
56244
3650.4
Carriers in increasing frequency order.
ETSI
BW
[RB]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
NUL/DL
55390
55538
55439
55538
55489
55538
55538
55916
56064
55941
56040
55965
56015
55990
56442
56590
56442
56541
56442
56491
56442
CC3
Note1
fUL/DL
[MHz]
3565
3579.8
3569.9
3579.8
3574.9
3579.8
3579.8
3617.6
3632.4
3620.1
3630
3622.5
3627.5
3625
3670.2
3685
3670.2
3680.1
3670.2
3675.1
3670.2
BW
[RB]
100
25
100
50
100
75
100
100
25
100
50
100
75
100
100
25
100
50
100
75
100
NUL/DL
55588
55655
55637
55682
55687
55709
55736
56114
56181
56139
56184
56163
56186
56188
56640
56707
56640
56685
56640
56662
56640
fUL/DL
[MHz]
3584.8
3591.5
3589.7
3594.2
3594.7
3596.9
3599.6
3637.4
3644.1
3639.9
3644.4
3642.3
3644.6
3644.8
3690
3696.7
3690
3694.5
3690
3692.2
3690
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.3
4.3.1.3.1
123
ETSI TS 136 508 V15.5.0 (2019-07)
HRPD Test frequencies
HRPD test frequencies for Band Class 0
Table 4.3.1.3.1-1: Test frequencies for HRPD in Band Class 0
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.3.2
Bandwidth
[MHz]
1.23
1.23
1.23
Channel
Number
1013
356
779
Frequency of
Uplink [MHz]
824.70
835.68
848.37
Frequency of
Downlink [MHz]
869.70
880.68
893.37
HRPD test frequencies for Band Class 1
Table 4.3.1.3.2-1: Test frequencies for HRPD in Band Class 1
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.3.3
Bandwidth
[MHz]
1.25
1.25
1.25
Channel
Number
25
600
1175
Frequency of
Uplink [MHz]
1851.25
1880.00
1908.75
Frequency of
Downlink [MHz]
1931.25
1960.00
1988.75
HRPD test frequencies for Band Class 3
Table 4.3.1.3.3-1: Test frequencies for HRPD in Band Class 3
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.3.4
Bandwidth
[MHz]
1.25
1.25
1.25
Channel
Number
1120
872
76
Frequency of
Uplink [MHz]
888.00
898.90
915.95
Frequency of
Downlink [MHz]
833.00
843.90
860.95
HRPD test frequencies for Band Class 4
Table 4.3.1.3.4-1: Test frequencies for HRPD in Band Class 4
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.3.5
Bandwidth
[MHz]
1.25
1.25
1.25
Channel
Number
100
300
525
Frequency of
Uplink [MHz]
1755.00
1765.00
1776.25
Frequency of
Downlink [MHz]
1845.00
1855.00
1866.25
HRPD test frequencies for Band Class 6
Table 4.3.1.3.5-1: Test frequencies for HRPD in Band Class 6
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
1.25
1.25
1.25
Channel
Number
125
200
350
ETSI
Frequency of
Uplink [MHz]
1926.25
1930.00
1937.50
Frequency of
Downlink [MHz]
2116.25
2120.00
2127.50
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.3.6
124
ETSI TS 136 508 V15.5.0 (2019-07)
HRPD test frequencies for Band Class 10
Table 4.3.1.3.6-1: Test frequencies for HRPD in Band Class 10
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.3.7
Bandwidth
[MHz]
1.25
1.25
1.25
Channel
Number
100
500
820
Frequency of
Uplink [MHz]
808.50
821.00
898.50
Frequency of
Downlink [MHz]
853.50
866.00
937.50
HRPD test frequencies for Band Class 15
Table 4.3.1.3.7-1: Test frequencies for HRPD in Band Class 15
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.4
4.3.1.4.1
Bandwidth
[MHz]
1.25
1.25
1.25
Channel
Number
75
450
800
Frequency of
Uplink [MHz]
1713.75
1732.50
1750.00
Frequency of
Downlink [MHz]
2113.75
2132.50
2150.00
1xRTT Test frequencies
1xRTT test frequencies for Band Class 0
Table 4.3.1.4.1-1: Test frequencies for 1xRTT in Band Class 0
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.4.2
Bandwidth
[MHz]
1.23
1.23
1.23
Channel
Number
1013
356
779
Frequency of
Uplink [MHz]
824.70
835.68
848.37
Frequency of
Downlink [MHz]
869.70
880.68
893.37
1xRTT test frequencies for Band Class 1
Table 4.3.1.4.2-1: Test frequencies for 1xRTT in Band Class 1
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.4.3
Bandwidth
[MHz]
1.25
1.25
1.25
Channel
Number
25
600
1175
Frequency of
Uplink [MHz]
1851.25
1880.00
1908.75
Frequency of
Downlink [MHz]
1931.25
1960.00
1988.75
1xRTT test frequencies for Band Class 3
Table 4.3.1.4.3-1: Test frequencies for 1xRTT in Band Class 3
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
1.25
1.25
1.25
Channel
Number
1120
872
76
ETSI
Frequency of
Uplink [MHz]
888.00
898.90
915.95
Frequency of
Downlink [MHz]
833.00
843.90
860.95
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.4.4
125
ETSI TS 136 508 V15.5.0 (2019-07)
1xRTT test frequencies for Band Class 4
Table 4.3.1.4.4-1: Test frequencies for 1xRTT in Band Class 4
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.4.5
Bandwidth
[MHz]
1.25
1.25
1.25
Channel
Number
100
300
525
Frequency of
Uplink [MHz]
1755.00
1765.00
1776.25
Frequency of
Downlink [MHz]
1845.00
1855.00
1866.25
1xRTT test frequencies for Band Class 6
Table 4.3.1.4.5-1: Test frequencies for 1xRTT in Band Class 6
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.4.6
Bandwidth
[MHz]
1.25
1.25
1.25
Channel
Number
225
275
375
Frequency of
Uplink [MHz]
1931.25
1933.75
1938.75
Frequency of
Downlink [MHz]
2121.25
2123.75
2128.75
1xRTT test frequencies for Band Class 10
Table 4.3.1.4.6-1: Test frequencies for 1xRTT in Band Class 10
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.4.7
Bandwidth
[MHz]
1.25
1.25
1.25
Channel
Number
100
500
820
Frequency of
Uplink [MHz]
808.50
821.00
898.50
Frequency of
Downlink [MHz]
853.50
866.00
937.50
1xRTT test frequencies for Band Class 15
Table 4.3.1.4.7-1: Test frequencies for 1xRTT in Band Class 15
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.5
NOTE:
Bandwidth
[MHz]
1.25
1.25
1.25
Channel
Number
75
450
800
Frequency of
Uplink [MHz]
1713.75
1732.50
1750.00
Frequency of
Downlink [MHz]
2113.75
2132.50
2150.00
MFBI Test frequencies
MFBI test frequencies are not used for TS 36.521-1, TS 36.521-3 and TS 37.571-1.
4.3.1.5.1
MFBI Test frequencies for operation band 2 overlapping with band 25
- same as per Table 4.3.1.1.2-1
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.5.2
126
ETSI TS 136 508 V15.5.0 (2019-07)
MFBI Test frequencies for operation band 3 overlapping with band 9
Table 4.3.1.5.2-1: Test frequencies for E-UTRA channel bandwidth for operating band 3 overlapping
with band 9
Test Frequency
ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
1.4
3
5
10
15 [1]
20 [1]
1.4/3/5/10
15 [1]/20 [1]
1.4
3
5
10
15 [1]
20 [1]
NUL
19606
19614
19624
19649
19674
19699
Frequency of
Uplink [MHz]
1750.6
1751.4
1752.4
1754.9
1757.4
1759.9
NDL
1606
1614
1624
1649
1674
1699
Frequency of
Downlink [MHz]
1845.6
1846.4
1847.4
1849.9
1852.4
1854.9
19774
1767.4
1774
1862.4
19942
19934
19924
19899
19874
1784.2
1783.4
1782.4
1779.9
1777.4
1942
1934
1924
1899
1874
1879.2
1878.4
1877.4
1874.9
1872.4
19849
1774.9
1849
1869.9
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement (TS
36.101 [27] Clause 7.3) is allowed.
4.3.1.5.3
MFBI Test frequencies for operation band 4 overlapping with band 10
- same as per Table 4.3.1.1.4-1.
4.3.1.5.4
MFBI Test frequencies for operation band 5 overlapping with band 18
Table 4.3.1.5.4-1: Test frequencies for E-UTRA channel bandwidth for operating band 5 overlapping
with band 18
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
1.4
3
5
1.4/3/5
1.4
3
5
20407
20415
20425
20430
20453
20445
20435
824.7
825.5
826.5
827
829.3
828.5
827.5
2407
2415
2425
2430
2453
2445
2435
ETSI
Frequency of
Downlink
[MHz]
869.7
870.5
871.5
872
874.3
873.5
872.5
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.5.5
127
ETSI TS 136 508 V15.5.0 (2019-07)
MFBI Test frequencies for operation band 5 overlapping with band 19
Table 4.3.1.5.5-1: Test frequencies for E-UTRA channel bandwidth for operating band 5 overlapping
with band 19
Test Frequency ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
Frequency of
Downlink
[MHz]
875.7
876.5
877.5
880
882.5
1.4
20467
830.7
2467
3
20475
831.5
2475
Low Range
5
20485
832.5
2485
10 [1]
20510
835
2510
20535
837.5
2535
1.4/3/5
Mid Range
10 [1]
1.4
20603
844.3
2603
889.3
3
20595
843.5
2595
888.5
High Range
5
20585
842.5
2585
887.5
10 [1]
20560
840
2560
885
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement (TS
36.101 [27] Clause 7.3) is allowed.
4.3.1.5.6
MFBI Test frequencies for operation band 5 overlapping with band 26
- same as per Table 4.3.1.1.5-1
4.3.1.5.7
MFBI Test frequencies for operation band 9 overlapping with band 3
- same as per Table 4.3.1.1.9-1
4.3.1.5.8
MFBI Test frequencies for operation band 10 overlapping with band 4
Table 4.3.1.5.8-1: Test frequencies for E-UTRA channel bandwidth for operating band 10 overlapping
with band 4
Test Frequency
ID
Low Range
Mid Range
High Range
4.3.1.5.9
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
NUL
Frequency of
Uplink [MHz]
1712.5
1715
1717.5
1720
1732.5
1752.5
1750
1747.5
1745
22175
22200
22225
22250
22375
22575
22550
22525
22500
NDL
4175
4200
4225
4250
4375
4575
4550
4525
4500
Frequency of
Downlink [MHz]
2112.5
2115
2117.5
2120
2132.5
2152.5
2150
2147.5
2145
MFBI Test frequencies for operation band 12 overlapping with band 17
Table 4.3.1.5.9-1: Test frequencies for E-UTRA channel bandwidth for operating band 12 overlapping
with band 17
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
1.4
3
5 [1]
10 [1]
1.4/3
5 [1]/10 [1]
1.4
NUL
23067
23075
23085
23110
23120
Frequency of
Uplink [MHz]
704.7
705.5
706.5
709
710
5067
5075
5085
5110
5120
Frequency of
Downlink [MHz]
734.7
735.5
736.5
739
740
23173
715.3
5173
745.3
ETSI
NDL
3GPP TS 36.508 version 15.5.0 Release 15
128
ETSI TS 136 508 V15.5.0 (2019-07)
3
23165
714.5
5165
744.5
5 [1]
23155
713.5
5155
743.5
10 [1]
23130
711
5130
741
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement (TS 36.101
[27] Clause 7.3) is allowed.
4.3.1.5.10
MFBI Test frequencies for operation band 17 overlapping with band 12
- same as per Table 4.3.1.1.17-1
4.3.1.5.11
MFBI Test frequencies for operation band 18 overlapping with band 5
Table 4.3.1.5.11-1: Test frequencies for E-UTRA channel bandwidth for operating band 18
overlapping with band 5
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.5.12
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
1.4
3
5
1.4/3/5
1.4
3
5
23947
23955
23965
23970
23993
23985
23975
824.7
825.5
826.5
827
829.3
828.5
827.5
5947
5955
5965
5970
5993
5985
5975
Frequency of
Downlink
[MHz]
869.7
870.5
871.5
872
874.3
873.5
872.5
MFBI Test frequencies for operation band 18 overlapping with band 26
- same as per Table 4.3.1.1.18-1
4.3.1.5.13
MFBI Test frequencies for operation band 18 overlapping with band 27
Table 4.3.1.5.13-1: Test frequencies for E-UTRA channel bandwidth for operating band 18
overlapping with band 27
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.5.14
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
1.4
3
5
1.4/3/5
1.4
3
5
23857
23865
23875
23895
23933
23925
23915
815.7
816.5
817.5
819.5
823.3
822.5
821.5
5857
5865
5875
5895
5933
5925
5915
Frequency of
Downlink
[MHz]
860.7
861.5
862.5
864.5
868.3
867.5
866.5
MFBI Test frequencies for operation band 19 overlapping with band 5
- same as per Table 4.3.1.1.19-1
4.3.1.5.15
MFBI Test frequencies for operation band 19 overlapping with band 26
- same as per Table 4.3.1.1.19-1
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.5.16
129
ETSI TS 136 508 V15.5.0 (2019-07)
MFBI Test frequencies for operation band 25 overlapping with band 2
Table 4.3.1.5.16-1: Test frequencies for E-UTRA channel bandwidth for operating band 25
overlapping with band 2
Test Frequency
ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
Frequency of
Downlink
[MHz]
1930.7
1931.5
1932.5
1935
1937.5
1940
1960
1.4
26047
1850.7
8047
3
26055
1851.5
8055
5
26065
1852.5
8065
Low Range
10
26090
1855
8090
15 [1]
26115
1857.5
8115
20 [1]
26140
1860
8140
Mid Range
1.4/3/5/10
26340
1880
8340
15 [1]/20 [1]
1.4
26633
1909.3
8633
1989.3
3
26625
1908.5
8625
1988.5
5
26615
1907.5
8615
1987.5
High Range
10
26590
1905
8590
1985
15 [1]
26565
1902.5
8565
1982.5
20 [1]
26540
1900
8540
1980
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement (TS
36.101 [27] Clause 7.3) is allowed.
4.3.1.5.17
MFBI Test frequencies for operation band 26 overlapping with band 5
Table 4.3.1.5.17-1: Test frequencies for E-UTRA channel bandwidth for operating band 26
overlapping with band 5
Test Frequency
ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
Frequency of
Downlink
[MHz]
869.7
870.5
871.5
874
876.5
881.5
1.4
26797
824.7
8797
3
26805
825.5
8805
Low Range
5
26815
826.5
8815
10[1]
26840
829
8840
15 [1]
26865
831.5
8865
1.4/3/5/10[1]
Mid Range
26915
836.5
8915
15 [1]
1.4
27033
848.3
9033
893.3
3
27025
847.5
9025
892.5
High Range
5
27015
846.5
9015
891.5
10[1]
26990
844
8990
889
15 [1]
26965
841.5
8965
886.5
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement (TS
36.101 [27] Clause 7.3) is allowed.
4.3.1.5.18
MFBI Test frequencies for operation band 26 overlapping with band 18
Table 4.3.1.5.18-1: Test frequencies for E-UTRA channel bandwidth for operating band 26
overlapping with band 18
Test Frequency
ID
Low Range
Mid Range
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
1.4
3
5
10[1]
1.4/3/5/10[1]
26707
26715
26725
26750
26775
815.7
816.5
817.5
820
822.5
8707
8715
8725
8750
8775
ETSI
Frequency of
Downlink
[MHz]
860.7
861.5
862.5
865
867.5
3GPP TS 36.508 version 15.5.0 Release 15
130
ETSI TS 136 508 V15.5.0 (2019-07)
1.4
26843
829.3
8843
874.3
3
26835
828.5
8835
873.5
High Range
5
26825
827.5
8825
872.5
10[1]
26800
825
8800
870
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement (TS
36.101 [27] Clause 7.3) is allowed.
4.3.1.5.19
MFBI Test frequencies for operation band 26 overlapping with band 19
Table 4.3.1.5.19-1: Test frequencies for E-UTRA channel bandwidth for operating band 26
overlapping with band 19
Test Frequency
ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
Frequency of
Downlink
[MHz]
875.7
876.5
877.5
880
882.5
1.4
26857
830.7
8857
3
26865
831.5
8865
Low Range
5
26875
832.5
8875
10[1]
26900
835
8900
1.4/3/5/10[1]
Mid Range
26925
837.5
8925
15 [1]
1.4
26993
844.3
8993
889.3
3
26985
843.5
8985
888.5
High Range
5
26975
842.5
8975
887.5
10[1]
26950
840
8950
885
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement (TS
36.101 [27] Clause 7.3) is allowed.
4.3.1.5.20
MFBI Test frequencies for operation band 26 overlapping with band 27
Table 4.3.1.5.20-1: Test frequencies for E-UTRA channel bandwidth for operating band 26
overlapping with band 27
Test Frequency
ID
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
Frequency of
Downlink
[MHz]
1.4
26697
814.7
8697
859.7
Low Range
3
26705
815.5
8705
860.5
5
26715
816.5
8715
861.5
Mid Range
1.4/3/5
26740
819
8740
864
1.4
26783
823.3
8783
868.3
High Range
3
26775
822.5
8775
867.5
5
26765
821.5
8765
866.5
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement (TS
36.101 [27] Clause 7.3) is allowed.
ETSI
NDL
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.5.21
131
ETSI TS 136 508 V15.5.0 (2019-07)
MFBI Test frequencies for operation band 27 overlapping with band 18
Table 4.3.1.5.21-1: Test frequencies for E-UTRA channel bandwidth for operating band 27
overlapping with band 18
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.5.22
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
1.4
3
5
1.4/3/5
1.4
3
5
27127
27135
27145
27165
27203
27195
27185
815.7
816.5
817.5
819.5
823.3
822.5
821.5
9127
9135
9145
9165
9203
9195
9185
Frequency of
Downlink
[MHz]
860.7
861.5
862.5
864.5
868.3
867.5
866.5
MFBI Test frequencies for operation band 27 overlapping with band 26
Table 4.3.1.5.22-1: Test frequencies for E-UTRA channel bandwidth for operating band 27
overlapping with band 26
Test Frequency
ID
Frequency of
Downlink
[MHz]
1.4
27117
814.7
9117
859.7
Low Range
3
27125
815.5
9125
860.5
5
27135
816.5
9135
861.5
Mid Range
1.4/3/5
27160
819
9160
864
1.4
27203
823.3
9203
868.3
High Range
3
27195
822.5
9195
867.5
5
27185
821.5
9185
866.5
NOTE 1: Bandwidth for which a relaxation of the specified UE receiver sensitivity requirement (TS
36.101 [27] Clause 7.3) is allowed.
4.3.1.5.23
Bandwidth
[MHz]
NUL
Frequency of
Uplink [MHz]
NDL
MFBI Test frequencies for operation band 33 overlapping with band 39
- same as per Table 4.3.1.2.1-1
4.3.1.5.24
MFBI Test frequencies for operation band 38 overlapping with band 41
- same as per Table 4.3.1.2.6-1
4.3.1.5.25
MFBI Test frequencies for operation band 39 overlapping with band 33
Table 4.3.1.5.25-1: Test frequencies for E-UTRA channel bandwidth for operating band 39
overlapping with band 33
Test Frequency ID
Low Range
Mid Range
High Range
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
ETSI
EARFCN
38475
38500
38525
38550
38550
38625
38600
38575
38550
Frequency (UL and DL)
[MHz]
1902.5
1905
1907.5
1910
1910
1917.5
1915
1912.5
1910
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.5.26
132
ETSI TS 136 508 V15.5.0 (2019-07)
MFBI Test frequencies for operation band 41 overlapping with band 38
Table 4.3.1.5.26-1: Test frequencies for E-UTRA channel bandwidth for operating band 41
overlapping with band 38
Test Frequency ID
Low Range
Mid Range
High Range
4.3.1.5.27
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
EARFCN
40415
40440
40465
40490
40640
40865
40840
40815
40790
Frequency (UL and DL)
[MHz]
2572.5
2575
2577.5
2580
2595
2617.5
2615
2612.5
2610
MFBI Test frequencies for operation band 66 overlapping with band 4
Table 4.3.1.5.27-1: Test frequencies for E-UTRA channel bandwidth for operating band 66
overlapping with band 4
Test Frequency
ID
Low Range
Mid Range
High Range
4.3.1.5.28
Bandwidth
[MHz]
1.4
3
5
10
15
20
1.4/3/5/10/15/20
1.4
3
5
10
15
20
NUL
131979
131987
131997
132022
132047
132072
132197
132415
132407
132397
132372
132347
132322
Frequency of
Uplink [MHz]
1710.7
1711.5
1712.5
1715
1717.5
1720
1732.5
1754.3
1753.5
1752.5
1750
1747.5
1745
NDL
66443
66451
66461
66486
66511
66536
66661
66879
66871
66861
66836
66811
66786
Frequency of
Downlink [MHz]
2110.7
2111.5
2112.5
2115
2117.5
2120
2132.5
2154.3
2153.5
2152.5
2150
2147.5
2145
MFBI Test frequencies for operation band 66 overlapping with band 10
Table 4.3.1.5.28-1: Test frequencies for E-UTRA channel bandwidth for operating band 66
overlapping with band 10
Test Frequency
ID
Low Range
Mid Range
High Range
4.3.1.5.29
Bandwidth
[MHz]
5
10
15
20
5/10/15/20
5
10
15
20
NUL
131997
132022
132047
132072
132197
132547
132522
132447
132472
Frequency of
Uplink [MHz]
1712.5
1715
1717.5
1720
1732.5
1767.5
1765
1757.5
1760
NDL
66461
66486
66511
66536
66736
67011
66986
66961
66936
Frequency of
Downlink [MHz]
2112.5
2115
2117.5
2120
2140
2167.5
2165
2162.5
2160
MFBI Test frequencies for operation band 4 overlapping with band 66
- same as per Table 4.3.1.1.4-1.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.3.1.5.30
133
ETSI TS 136 508 V15.5.0 (2019-07)
MFBI Test frequencies for operation band 10 overlapping with band 66
- same as per Table 4.3.1.1.10-1.
4.3.1.6
4.3.1.6.1
WLAN Test frequencies
WLAN Test frequencies for 2.4 GHz ISM Band
Table 4.3.1.6.1-1: Test frequencies for WLAN for 2.4 GHz Band
4.3.1.6.2
Test Frequency ID
Bandwidth
[MHz]
Low Range (1)
Mid Range (2)
High Range (3)
20
20
20
WLAN
Channel
Number
1
6
11
Centre Frequency
(UL and DL)[MHz]
2412
2437
2462
WLAN Test frequencies for 5 GHz ISM Band
Table 4.3.1.6.1-1: Test frequencies for WLAN for 5 GHz Band
4.3.2
4.3.2.1
Test Frequency ID
Bandwidth
[MHz]
Low Range (1)
Mid Range (2)
High Range (3)
20
20
20
WLAN
Channel
Number
48
56
64
Centre Frequency
(UL and DL)[MHz]
5240
5280
5320
Radio conditions
Normal propagation condition
The downlink connection between the System Simulator and the UE is without Additive White Gaussian Noise, and has
no fading or multipath effects.
The uplink connection between the UE and System Simulator is without Additive White Gaussian Noise, and has no
fading or multipath effects.
4.3.3
4.3.3.1
Physical channel allocations
Antennas
If the UE has two Rx antennas, the same downlink signal is applied to each one. Both UE Rx antennas shall be
connected unless otherwise stated in the test case.
If the UE has one Rx antenna, the downlink signal is applied to it.
4.3.3.2
Downlink physical channels and physical signals
The Downlink Physical channels and Physical signals used and their relative powers are specified for single SS Tx
antenna in table 4.3.3.2-1 and for two SS Tx antennas in table 4.3.3.2-2. The details of downlink power allocation for
PDSCH channel are described in TS 36.213 [29] clause 5.2. For BL-UE testing, PHICH is not required and MPDCCH
is required.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
134
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.3.2-1: Power allocation for OFDM symbols and reference signals, single SS Tx antenna
Physical Channel
PBCH
PSS
SSS
PCFICH
PDCCH
MPDCCH
PDSCH
PHICH
PMCH
MBSFN RS
EPRE Ratio
PBCH_RA = 0 dB
PBCH_RB = 0 dB
PSS_RA = 0 dB
SSS_RA = 0 dB
PCFICH_RB = 0 dB
PDCCH_RA = 0 dB
PDCCH_RB = 0 dB
MPDCCH_RA = 0 dB
MPDCCH_RB = 0 dB
PDSCH_RA = 0 dB
PDSCH_RB = 0 dB
PHICH_RB = 0 dB
PMCH_RA = 0 dB
MBSFN RS_RA = 0dB
Table 4.3.3.2-2: Power allocation for OFDM symbols and reference signals, two SS Tx antennas
Physical Channel
PBCH
PSS
SSS
PCFICH
PDCCH
MPDCCH
PDSCH
PHICH
PMCH
MBSFN RS
NOTE:
4.3.3.3
EPRE Ratio
PBCH_RA = 0 dB
PBCH_RB = 0 dB
PSS_RA = 0 dB
SSS_RA = 0 dB
PCFICH_RB = 0 dB
PDCCH_RA = 0 dB
PDCCH_RB = 0 dB
MPDCCH_RA = 0 dB
MPDCCH_RB = 0 dB
PDSCH_RA = -3 dB
PDSCH_RB = -3 dB
PHICH_RB = 0 dB
PMCH_RA = 0 dB
MBSFN RS_RA = 0dB
MBSFN RS is not defined downlink physical channels in TS 36.211 [35].
Mapping of downlink physical channels and signals to physical resources
Parameters for mapping of downlink physical channels and signals are specified as follows.
Normal Cyclic Prefix
cell
N ID
, Physical layer cell identity = 0 is used as the default physical layer cell identity
CFI
= 3 for 1.4, 3 and 5 MHz system bandwidths
= 2 for 10, 15 and 20 MHz system bandwidths
= 2 if PMCH is configured (‘mbsfn-SubframeConfiguration’ is present in SIB2)
Ng
=1
PHICH duration
= Normal
For Signalling testing, the default system bandwidth is 5/10/20 MHz and single SS Tx antenna is used unless specified
otherwise in the test case. The mapping of downlink physical channels to physical resources for Single Tx Antenna is
described in table 4.3.3.3-1 for 5/10MHz system bandwidth FDD and table 4.3.3.3-2 for 5/20MHz system bandwidth
TDD.
For RF testing, the mapping of DL physical channels to resource element is defined TS 36.521-1 [21] Annex C.1.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
135
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.3.3-1: Mapping of DL Physical Channels to Resource Elements for Single SS Tx Antenna
and 5/10 MHz System Bandwidth (FDD)
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Physical
channel
PBCH
Time Domain Location
136
Frequency Domain Location
Symbols 0 to 3 of slot 1 of
subframe 0 of each radio frame
Occupies 72 subcarriers
centred on the DC subcarrier
PSS
Symbol 6 of slot 0 and 10 of
each radio frame
SSS
Symbol 5 of slots 0 and 10 of
each radio frame
PCFICH
Symbol 0 of each subframe
PHICH
Symbol 0 of each subframe
Occupies 62 subcarriers
centred on the DC subcarrier.
Additional 10 subcarriers (5 on
each side) adjacent to the
centred 62 subcarriers are
reserved.
Occupies 62 subcarriers
centred on the DC subcarrier.
Additional 10 subcarriers (5 on
each side) adjacent to the
centred 62 subcarriers are
reserved.
Maps into 4 REGs uniformly
spread in the frequency domain
over the whole system
bandwidth.
Each PHICH group maps into 3
REGs in the frequency domain
on the REGs not assigned to
PCFICH over the whole system
bandwidth,
PDCCH
Symbols 0, 1, 2 of each
subframe (BW=5MHz)
The remaining REGs not
allocated to both PCFICH and
PHICH are used for PDCCH
Symbols 0, 1 of each subframe
(BW=10MHz)
Symbols 0, 1 of each MBSFN
subframe
MPDCCH
Same as PDSCH
For Subframe 0, subcarriers
corresponding to resource
elements not allocated to RS,
PSS, SSS and PBCH (core set
and repetitions) and reserved
for PBCH antenna ports 3 and
4 on the 72 central subcarriers.
For Subframe 5, subcarriers
corresponding to resource
elements not allocated to RS,
PSS and SSS.
For Subframe 9, subcarriers
corresponding to resource
elements not allocated to RS,
PSS, SSS and PBCH
(repetitions).
For other subframes,
subcarriers corresponding to
resource elements not
allocated to RS.
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
Note
Mapping rule is specified in
TS36.211 [35] sub clause
6.6.4
Mapping rule is specified in
TS36.211 [35] sub clause
6.11.1.2
Mapping rule is specified in
TS36.211 [35] sub clause
6.11.2.2
Mapping rule is specified in
TS36.211 [35] sub clause
6.7.4
- CELL_ID = 0
Mapping rule is specified in
TS36.211 [35] sub clause
6.9.3
- CELL_ID = 0
- Number of PHICH groups =
4(BW=5 MHz)/7(BW=10MHz)
Mapping rule is specified in
TS36.211 [35] sub clause
6.8.5
- CFI = 3 (BW=5MHz)
Mapping rule is specified in
TS36.211 [35] sub clause
6.8.5
- CFI = 2(BW=10MHz)
Mapping rule is specified in
TS36.211 [35] sub clause
6.8.5
- CFI = 2
Mapping rule is specified in
TS36.211 [35] sub clause
6.8B.5
3GPP TS 36.508 version 15.5.0 Release 15
PDSCH
All remaining OFDM symbols of
each subframe not allocated to
PDCCH
137
ETSI TS 136 508 V15.5.0 (2019-07)
For Subframe 0,
REs not allocated to RS, PSS,
SSS and PBCH is allocated to
PDSCH
For Subframe 5,
REs not allocated to RS, PSS
and SSS is allocated to
PDSCH
PMCH
NOTE:
MBSFN region of MBSFN
subframes
For other subframes,
REs not allocated to RS is
allocated to PDSCH
REs not allocated to MBSFN
RS is allocated to PMCH
In case a single cell-specific RS is configured, cell-specific RS shall be assume to be present on antenna
ports 0 and 1 for the purpose of mapping a symbol-quadruplet to a REG (resource element group).
(See TS 36.211 [35] sub clause 6.2.4).
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
138
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.3.3-2: Mapping of DL Physical Channels to Resource Elements for Single SS Tx Antenna
and 5/20 MHz System Bandwidth (TDD)
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Physical
channel
PBCH
PSS
Time Domain Location
Symbols 0 to 3 of slot 1 of
subframe 0 of each radio
frame
Symbol 2 of slot 2 and 12 of
each radio frame
139
Frequency Domain
Location
Occupies 72 subcarriers
centred on the DC subcarrier
Occupies 62 subcarriers
centred on the DC subcarrier.
Additional 10 subcarriers (5
on each side) adjacent to the
centred 62 subcarriers are
reserved.
Occupies 62 subcarriers
centred on the DC subcarrier.
Additional 10 subcarriers (5
on each side) adjacent to the
centred 62 subcarriers are
reserved.
Maps into 4 REGs uniformly
spread in the frequency
domain over the whole
system bandwidth.
Each PHICH group maps into
3 REGs in the frequency
domain on the REGs not
assigned to PCFICH over the
whole system bandwidth.
SSS
Symbol 6 of slots 1 and 11 of
each radio frame
PCFICH
Symbol 0 of each downlink
subframe and Special
subframe
PHICH
Symbol 0 of each downlink
subframe and Special
subframe
PDCCH
Symbols 0, 1 of subframe 1, 6
and Symbols 0, 1, 2 of other
downlink subframes
(BW=5MHz)
Symbols 0, 1 of subframe 1, 6
and Symbols 0, 1 of other
downlink subframes
(BW=20MHz)
Symbols 0, 1 of each MBSFN
subframe
The remaining REGs not
allocated to both PCFICH and
PHICH are used for PDCCH
MPDCCH
Same as PDSCH
For Subframe 0, subcarriers
corresponding to resource
elements not allocated to RS,
SSS and PBCH (core set and
repetitions) and reserved for
PBCH antenna ports 3 and 4
on the 72 central subcarriers.
For Subframe 5, subcarriers
corresponding to resource
elements not allocated to RS,
SSS and PBCH (repetitions).
For Subframe 1 and 6,
resource elements not
allocated to RS, PSS, GP and
UpPTS.
For other subframes,
subcarriers corresponding to
resource elements not
allocated to RS.
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
Note
Mapping rule is specified in
TS36.211 [35] subclause
6.6.4
Mapping rule is specified in
TS36.211 [35] subclause
6.11.1.2
Mapping rule is specified in
TS36.211 [35] subclause
6.11.2.2
Mapping rule is specified in
TS36.211 [35] subclause
6.7.4
- CELL_ID = 0
Mapping rule is specified in
TS36.211 [35] subclause
6.9.3
- CELL_ID = 0
- Number of PHICH groups =
4(BW=5MHz)/13(BW=20MHz)
Mapping rule is specified in
TS36.211 [35] subclause
6.8.5
- CFI = 3 (BW=5MHz)
Mapping rule is specified in
TS36.211 [35] subclause
6.8.5
- CFI = 2 (BW=20MHz)
Mapping rule is specified in
TS36.211 [35] sub clause
6.8.5
- CFI = 2
Mapping rule is specified in
TS36.211 [35] sub clause
6.8B.5
3GPP TS 36.508 version 15.5.0 Release 15
PDSCH
All remaining OFDM symbols
of each downlink subframe
and DwPTS not allocated to
PDCCH
140
ETSI TS 136 508 V15.5.0 (2019-07)
For Subframe 0,
REs not allocated to RS, SSS
and PBCH is allocated to
PDSCH
For Subframe 5,
REs not allocated to RS and
SSS is allocated to PDSCH
For Subframe 1 and 6,
REs not allocated to RS,
PSS, GP and UpPTS is
allocated to PDSCH
PMCH
MBSFN region of MBSFN
subframes
For other downlink
subframes,
REs not allocated to RS is
allocated to PDSCH
REs not allocated to MBSFN
RS is allocated to PMCH
NOTE 1: In case a single cell-specific RS is configured, cell-specific RS shall be assume to be present on antenna
ports 0 and 1 for the purpose of mapping a symbol-quadruplet to a REG (resource element group). (See
TS 36.211 [35] subclause 6.2.4)
NOTE 2: In case the default TDD configuration for subframe assignment and special subframe patterns (see
subclause 4.6.3)
4.3.3.4
Uplink physical channels and physical signals
[FFS].
4.3.3.5
Mapping of uplink physical channels and signals to physical resources
[FFS].
4.3.4
Signal levels
4.3.4.1
Downlink signal levels
The downlink power settings in table 4.3.4.1-1 are used unless otherwise specified in a test case.
Table 4.3.4.1-1: Default Downlink power levels
Unit
Channel bandwidth
1.4 MHz
3 MHz
5 MHz
10 MHz
15 MHz
20 MHz
Number of RBs
6
15
25
50
75
100
Channel BW Power
dBm
-66
-62
-60
-57
-55
-54
RS EPRE
dBm/15kHz
-85
-85
-85
-85
-85
-85
Note 1: The channel bandwidth powers are informative, based on -85dBm/15kHz RS_EPRE, then
scaled according to the number of RBs and rounded to the nearest integer dBm value. Full
RE allocation with no boost or deboost is assumed.
Note 2: The power level is specified at each UE Rx antenna.
It is [FFS] whether there is a requirement to specify constant power throughout all OFDM symbols, and if so how
unallocated Resource elements should be treated.
The default signal level uncertainty is +/-3dB at each test port, for any level specified. If the uncertainty value is critical
for the test purpose a tighter uncertainty is specified for the related test case in TS 36.521-1 [21] Annex F or in TS
36.521-3 [34] Annex F
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
141
ETSI TS 136 508 V15.5.0 (2019-07)
4.3.4.2 Uplink signal levels
[FFS]
4.3.5
4.3.5.1
Standard test signals
Downlink test signals
[FFS]
4.3.5.2
Uplink test signals
[FFS]
4.3.6
4.3.6.1
Physical layer parameters
Downlink physical layer parameters
4.3.6.1.1
Physical layer parameters for DCI format 0
Default physical layer parameters for DCI format 0 are specified in table 4.3.6.1.1-1.
Table 4.3.6.1.1-1: Physical layer parameters for DCI format 0
Parameter
Flag for format 0/format 1A differentiation
Hopping flag
Resource block assignment and hopping resource allocation
Modulation and coding scheme and redundancy version
New data indicator
TPC command for scheduled PUSCH
Cyclic shift for DM RS
UL index (TDD only)
Downlink Assignment Index (TDD only)
CQI request
ETSI
Value
format 0
w/o Hopping
Depending on test parameters
Depending on test parameters
Set for every data
transmission/retransmission
according to the rules specified
in TS 36.321
0 dB (accumulated TPC)
0
2 bits as defined in sections
5.1.1.1 and 8 of TS 36.213. This
field is present only for TDD
configuration 0
2 bits as defined in Table 7.3-X
in TS 36.213. It represents the
total number of PDSCH
subframes with and without
PDCCH and PDCCH indicating
downlink SPS release in the
window. This field is present only
for TDD configuration 1-6
w/o aperiodic CQI
Value in binary
"0"
"0"
"01"
"000"
-
-
"0"
3GPP TS 36.508 version 15.5.0 Release 15
4.3.6.1.1A
142
ETSI TS 136 508 V15.5.0 (2019-07)
Physical layer parameters for DCI format 0C
Default physical layer parameters for DCI format 0C are specified in table 4.3.6.1.1A-1.
Table 4.3.6.1.1A-1: Physical layer parameters for DCI format 0C
Parameter
Flag for format 0C/format 1A differentiation
Value
format 0
This field is only present if
UL
DL
N RB
≤ N RB
. The interpretation
Resource allocation type
of this field is provided in section
8.1 of TS 36.213.
w/o Hopping
Depending on test parameters
5 bits as defined in 8.6 of TS
36.213.
No repetitions
3 bits as defined in section 8.0 of
36.213
Depending on test parameters,
3bits for FDD, 4 bits for TDD.
1 bit.
2 bits.
0 dB (accumulated TPC)
3 bits as defined in 5.5.2.1.1 of
TS 36.211.
2 bits as defined in 5.1.1.1,
7.2.1, 8 and 8.4 of TS 36.213.
(this field is present only for TDD
operation with uplink-downlink
configuration 0)
2 bits as defined in section 7.3 of
TS 36.213 (This field is present
only for cases with TDD primary
cell and either TDD operation
with uplink-downlink
configurations 1-6 or FDD
operation.)
1, 2 or 3 bits as defined in
section 7.2.1 of TS 36.213.
1 bit as defined in section x.x of
TS 36.213.
Number of bits as specified in
Table 5.3.3.1.8-1 of TS 36.212
Frequency Hopping flag
Resource block assignment
Modulation and coding scheme
Repetition number
HARQ process number
New data indicator
Redundancy version
TPC command for scheduled PUSCH
Cyclic shift for DM RS and OCC index
UL index
Downlink Assignment Index (DAI)
CSI request
Modulation order override
Precoding information
ETSI
Value in binary
"0"
"0"
“000”
"00"
"01"
-
-
-
-
3GPP TS 36.508 version 15.5.0 Release 15
4.3.6.1.1B
143
ETSI TS 136 508 V15.5.0 (2019-07)
Physical layer parameters for DCI format 0A
Default physical layer parameters for DCI format 0A are specified in table 4.3.6.1.1B-1.
Table 4.3.6.1.1B-1: Physical layer parameters for DCI format 0A
Parameter
Carrier indicator
Flag for format 0A/format 1A differentiation
PUSCH trigger A
Timing offset
Resource block assignment
Modulation and coding scheme
HARQ process number
New data indicator
Redundancy version
TPC command for scheduled PUSCH
Cyclic shift for DM RS and OCC index
CSI request
SRS request
PUSCH starting position
PUSCH ending symbol
Channel Access type
Channel Access Priority Class
4.3.6.1.1C
Value
0 or 3 bits. This field is present according
to the definitions in TS 36.213.
format 0A
non-triggered scheduling
0
Depending on test parameters
Depending on test parameters
Depending on test parameters
Set for every data
transmission/retransmission according to
the rules specified in TS 36.321
2 bits.
0 dB (accumulated TPC)
3 bits as defined in 5.5.2.1.1 of TS
36.211
w/o aperiodic CQI
w/o SRS
25us in symbol 0
the last symbol of the subframe
channel access Type 2
1
Value in binary
not present
"0"
“0”
“0000”
-
"00"
"01"
“0”
“0”
“01”
“0”
“1”
“01”
Physical layer parameters for DCI format 0B
Default physical layer parameters for DCI format 0B are specified in table 4.3.6.1.1C-1.
Table 4.3.6.1.1C-1: Physical layer parameters for DCI format 0B
Parameter
Carrier indicator
PUSCH trigger A
Timing offset
Number of scheduled subframes
Resource block assignment
Modulation and coding scheme
HARQ process number
New data indicator
Redundancy version
TPC command for scheduled PUSCH
Cyclic shift for DM RS and OCC index
CSI request
SRS request
PUSCH starting position
PUSCH ending symbol
Channel Access type
Channel Access Priority Class
Value
0 or 3 bits. This field is present according
to the definitions in TS 36.213.
non-triggered scheduling
0
4
Depending on test parameters
Depending on test parameters
Depending on test parameters
Set for every data
transmission/retransmission according to
the rules specified in TS 36.321
2 bits.
0 dB (accumulated TPC)
3 bits as defined in 5.5.2.1.1 of TS
36.211
w/o aperiodic CQI
w/o SRS
25us in symbol 0
the last symbol of the subframe
channel access Type 2
1
ETSI
Value in binary
not present
“0”
“0000”
“11”
"00"
"01"
“0”
“0”
“01”
“0”
“1”
“01”
3GPP TS 36.508 version 15.5.0 Release 15
4.3.6.1.2
144
ETSI TS 136 508 V15.5.0 (2019-07)
Physical layer parameters for DCI format 1
Default physical layer parameters for DCI format 1 are specified in table 4.3.6.1.2-1.
Table 4.3.6.1.2-1: Physical layer parameters for DCI format 1
Parameter
Resource allocation header
Resource block assignment
Modulation and coding scheme
Value
Resource allocation type 0
Depending on test parameters
Depending on test parameters
Depending on test parameters,
3bits for FDD, 4 bits for TDD.
Set for every data
transmission/retransmission
according to the rules specified
in TS 36.321
Depending on test parameters
0 dB (accumulated TPC)
2 bits as defined in Table 7.3-X
in TS 36.213. It represents the
number of PDSCH with PDCCH
and PDCCH indicating downlink
SPS release in the window up to
the present subframe. This is
present for all the uplinkdownlink configurations and only
applies to uplink -downlink
configuration 1-6
HARQ process number
New data indicator
Redundancy version
TPC command for PUCCH
Downlink Assignment Index (TDD only)
4.3.6.1.3
Value in binary
"0"
-
"00"
"01"
-
Physical layer parameters for DCI format 1A
Default physical layer parameters for DCI format 1A are specified in table 4.3.6.1.3-1.
Table 4.3.6.1.3-1: Physical layer parameters for DCI format 1A
Parameter
Flag for format 0/format 1A differentiation
Localized/Distributed VRB assignment flag
Resource block assignment
Modulation and coding scheme
Value
format 1A
Localized VRB assignment
Depending on test parameters
Depending on test parameters
Depending on test parameters,
3bits for FDD, 4 bits for TDD.
Set for every data
transmission/retransmission
according to the rules specified
in TS 36.321
Depending on test parameters
0 dB (accumulated TPC)
2 bits as defined in Table 7.3-X
in TS 36.213. It represents the
number of PDSCH with PDCCH
and PDCCH indicating downlink
SPS release in the window up to
the present subframe. This is
present for all the uplinkdownlink configurations and only
applies to uplink -downlink
configuration 1-6
HARQ process number
New data indicator
Redundancy version
TPC command for PUCCH
Downlink Assignment Index (TDD only)
ETSI
Value in binary
"1"
"0"
-
"00"
"01"
-
3GPP TS 36.508 version 15.5.0 Release 15
4.3.6.1.3A
145
ETSI TS 136 508 V15.5.0 (2019-07)
Physical layer parameters for DCI format 1B
Default physical layer parameters for DCI format 1B are specified in table 4.3.6.1.3A-1.
Table 4.3.6.1.3A-1: Physical layer parameters for DCI format 1B
Parameter
Localized/Distributed VRB assignment flag
Resource block assignment
Modulation and coding scheme
Value
Localized VRB assignment
Depending on test parameters
Depending on test parameters
Depending on test parameters,
3bits for FDD, 4 bits for TDD.
Set for every data
transmission/retransmission
according to the rules specified
in TS 36.321
Depending on test parameters
0 dB (accumulated TPC)
2 bits as defined in Table 7.3-X
in TS 36.213. It represents the
number of PDSCH with PDCCH
and PDCCH indicating downlink
SPS release in the window up to
the present subframe. This is
present for all the uplinkdownlink configurations and only
applies to uplink -downlink
configuration 1-6
Set for codebook index
according to TS 36.211 Table
6.3.4.2.3-1 for 2 Tx antenna
ports and Table 6.3.4.2.3-2 for 4
Tx antenna ports corresponding
to the single layer transmission
Set for every transmission, 1 for
precoding according to the latest
reported PMI on PUSCH,0 for
precoding according to the
indicated TPMI in the TPMI
information field
HARQ process number
New data indicator
Redundancy version
TPC command for PUCCH
Downlink Assignment Index (TDD only)
TPMI information for precoding
PMI confirmation for precoding
4.3.6.1.4
Value in binary
"0"
-
"00"
"01"
-
-
-
Physical layer parameters for DCI format 1C
Default physical layer parameters for DCI format 1C are specified in table 4.3.6.1.4-1.
Table 4.3.6.1.4-1: Physical layer parameters for DCI format 1C
Parameter
gap value (N_RB >= 50)
Resource block assignment
Transport block size index
Value
gap1
depending on test parameters
depending on test parameters
ETSI
Value in binary
"0"
-
3GPP TS 36.508 version 15.5.0 Release 15
4.3.6.1.5
146
ETSI TS 136 508 V15.5.0 (2019-07)
Physical layer parameters for DCI format 2
Default physical layer parameters for DCI format 2 are specified in table 4.3.6.1.5-1.
Table 4.3.6.1.5-1: Physical layer parameters for DCI format 2
Parameter
Resource allocation header
Resource block assignment
TPC command for PUCCH
Value
Resource allocation type 0
Depending on test parameters
0 dB (accumulated TPC)
2 bits as defined in Table 7.3-X
in TS 36.213. It represents the
number of PDSCH with PDCCH
and PDCCH indicating downlink
SPS release in the window up to
the present subframe. This is
present for all the uplinkdownlink configurations and only
applies to uplink -downlink
configuration 1-6
Depending on test parameters,
3bits for FDD, 4 bits for TDD.
No swap
Depending on test parameters
Set for every data
transmission/retransmission
according to the rules specified
in TS 36.321
Depending on test parameters
Depending on test parameters
Set for every data
transmission/retransmission
according to the rules specified
in TS 36.321
Depending on test parameters
Set for every transmission
according to 36.212 Table
5.3.3.1.5-4 for 2 Tx antenna
ports and Table 5.3.3.1.5-5 for 4
Tx antenna ports
Downlink Assignment Index (TDD only)
HARQ process number
Transport block to codeword swap flag
Modulation and coding scheme (transport block 1)
New data indicator (transport block 1)
Redundancy version (transport block 1)
Modulation and coding scheme (transport block 2)
New data indicator (transport block 2)
Redundancy version (transport block 2)
Precoding information
ETSI
Value in binary
"0"
"01"
-
"0"
-
-
3GPP TS 36.508 version 15.5.0 Release 15
4.3.6.1.6
147
ETSI TS 136 508 V15.5.0 (2019-07)
Physical layer parameters for DCI format 2A
Default physical layer parameters for DCI format 2A are specified in table 4.3.6.1.6-1.
Table 4.3.6.1.6-1: Physical layer parameters for DCI format 2A
Parameter
Resource allocation header
Resource block assignment
TPC command for PUCCH
Value
Resource allocation type 0
depending on test parameters
0 dB (accumulated TPC)
2 bits as defined in Table 7.3-X
in TS 36.213. It represents the
number of PDSCH with PDCCH
and PDCCH indicating downlink
SPS release in the window up to
the present subframe. This is
present for all the uplinkdownlink configurations and only
applies to uplink -downlink
configuration 1-6
depending on test parameters,
3bits for FDD, and 4 bits for
TDD.
No swap
depending on test parameters
Set for every data
transmission/retransmission
according to the rules specified
in TS 36.321
depending on test parameters
depending on test parameters
Set for every data
transmission/retransmission
according to the rules specified
in TS 36.321
depending on test parameters
N/A for 2 Tx antenna ports. For 4
Tx antenna ports, set for every
transmission according to
36.212 Table 5.3.3.1.5A-2
Downlink Assignment Index (TDD only)
HARQ process number
Transport block to codeword swap flag
Modulation and coding scheme (transport block 1)
New data indicator (transport block 1)
Redundancy version (transport block 1)
Modulation and coding scheme (transport block 2)
New data indicator (transport block 2)
Redundancy version (transport block 2)
Precoding information
4.3.6.1.6A
Value in binary
"0"
"01"
-
"0"
-
Physical layer parameters for DCI format 3B
Default physical layer parameters for DCI format 3B are specified in table 4.3.6.1.6A-1 for up to 5 TDD SCells
configured without PUCCH/PUSCH.
Table 4.3.6.1.6A-1: Physical layer parameters for DCI format 3B for up to 5 TDD SCells configured
without PUCCH/PUSCH
Parameter
Value
1 bit. The interpretation of this
field is provided in section 8.2 of
TS 36.213.
0 dB (accumulated TPC)
SRS request (block number 1)
TPC command (block number 1)
ETSI
Value in binary
“1”
"01"
3GPP TS 36.508 version 15.5.0 Release 15
4.3.6.1.6B
148
ETSI TS 136 508 V15.5.0 (2019-07)
Physical layer parameters for DCI format 4A
Default physical layer parameters for DCI format 4A are specified in table 4.3.6.1.6B-1.
Table 4.3.6.1.6B-1: Physical layer parameters for DCI format 4A for eLAA
Parameter
Carrier indicator
PUSCH trigger A
Timing offset
Resource block assignment
HARQ process number
Redundancy version
TPC command for scheduled PUSCH
Cyclic shift for DM RS and OCC index
CSI request
SRS request
PUSCH starting position
PUSCH ending symbol
Channel Access type
Channel Access Priority Class
Modulation and coding scheme and
redundancy version for transport block 1
New data indicator for transport block 1
Modulation and coding scheme and
redundancy version for transport block 2
New data indicator for transport block 2
Precoding information and number of layers
4.3.6.1.6C
Value
0 or 3 bits. This field is present according to
the definitions in TS 36.213.
non-triggered scheduling
0
Depending on test parameters
2 bits.
Depending on test parameters
0 dB (accumulated TPC)
3 bits as defined in 5.5.2.1.1 of TS 36.211
w/o aperiodic CQI
w/o SRS
25us in symbol 0
the last symbol of the subframe
channel access Type 2
1
Depending on test parameters
Value in binary
not present
“0”
“0000”
"00"
"01"
“0”
“0”
“01”
“0”
“1”
“01”
-
Depending on test parameters
Depending on test parameters
-
Depending on test parameters
Depending on test parameters
-
-
Physical layer parameters for DCI format 4B
Default physical layer parameters for DCI format 4B are specified in table 4.3.6.1.6C-1.
Table 4.3.6.1.6C-1: Physical layer parameters for DCI format 4B for eLAA
Parameter
Carrier indicator
PUSCH trigger A
Timing offset
Number of scheduled subframes
Resource block assignment
HARQ process number
Redundancy version
TPC command for scheduled PUSCH
Cyclic shift for DM RS and OCC index
CSI request
SRS request
PUSCH starting position
PUSCH ending symbol
Channel Access type
Channel Access Priority Class
Modulation and coding scheme and
redundancy version for transport block 1
New data indicator for transport block 1
Modulation and coding scheme and
redundancy version for transport block 2
New data indicator for transport block 2
Precoding information and number of layers
Value
0 or 3 bits. This field is present according to
the definitions in TS 36.213.
non-triggered scheduling
0
4
Depending on test parameters
Depending on test parameters
2 bits.
0 dB (accumulated TPC)
3 bits as defined in 5.5.2.1.1 of TS 36.211
w/o aperiodic CQI
w/o SRS
25us in symbol 0
the last symbol of the subframe
channel access Type 2
1
Depending on test parameters
Value in binary
not present
“0”
“0000”
“11”
"00"
"01"
“0”
“0”
“01”
“0”
“1”
“01”
-
Depending on test parameters
Depending on test parameters
-
Depending on test parameters
Depending on test parameters
-
ETSI
-
3GPP TS 36.508 version 15.5.0 Release 15
4.3.6.1.7
149
ETSI TS 136 508 V15.5.0 (2019-07)
Physical layer parameters for DCI format 5
Default physical layer parameters for DCI format 5 are specified in table 4.3.6.1.7-1.
Table 4.3.6.1.7-1: Physical layer parameters for DCI format 5
Parameter
Resource for PSCCH
TPC command for PSCCH and PSSCH
Frequency hopping flag
Resource block assignment and hopping resource allocation
Time resource pattern
4.3.6.1.7A
Value
Depending on test parameters
w/o hopping
Value in binary
“0”
“0”
Depending on test parameters
Physical layer parameters for DCI format 5A
Default physical layer parameters for DCI format 5A are specified in table 4.3.6.1.7A-1.
Table 4.3.6.1.7A-1: Physical layer parameters for DCI format 5A
Parameter
Carrier indicator
Lowest index of the subchannel allocation
Frequency resource location
Time gap between initial transmission and retransmission
4.3.6.1.8
Value
Pcell’s frequency
Depending on test parameters
Depending on test parameters
Depending on test parameters
Value in binary
“0”
Physical layer parameters for DCI format 6-0A
Default physical layer parameters for DCI format 6-0A for scheduling of PUSCH are specified in table 4.3.6.1.8-1.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
150
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.3.6.1.8-1: Physical layer parameters for DCI format 6-0A
Parameter
Flag format 6-0A/format 6-1A differentiation
Frequency hopping flag
Resource block assignment - narrowband index
Value
format 0A
w/o Hopping
nNB = 0 according to section
5.2.4 in TS 36.211
Value in binary
"0"
"0"
Condition
“0”
RF
See TS 36.523-3 clause 7.3.3.9
Depending on test parameters
Resource block assignment – UL resource allocation
Modulation and coding scheme
Repetition number
HARQ process number
New data indicator
Redundancy version
TPC command for scheduled PUSCH
UL index (TDD only)
Downlink Assignment Index (TDD only)
CSI request
SRS request
DCI subframe repetition number
Condition
RF
SIG
5 bits provide the resource
allocation using UL resource
allocation type 0 within the
indicated narrowband
Depending on test parameters
No repetitions
2 bits as defined in section 8.0 of
36.213
Depending on test parameters, 3
bits
Set for every data
transmission/retransmission
according to the rules specified
in TS 36.321
Depending on test parameters
0 dB (accumulated TPC)
2 bits as defined in sections
5.1.1.1 and 8 of TS 36.213. This
field is present only for TDD
configuration 0
2 bits as defined in Table 7.3 in
TS 36.213. It represents the total
number of PDSCH subframes
with and without PDCCH and
PDCCH indicating downlink SPS
release in the window. This field
is present only for TDD
configuration 1-6
w/o aperiodic CQI
1 bit. The interpretation of this
field is provided in section 8.2 of
TS 36.213.
0
Explanation
For RF, performance and RRM testing
For protocol testing
ETSI
SIG
-
“00”
-
"01"
-
-
"0"
“0”
”00”
3GPP TS 36.508 version 15.5.0 Release 15
4.3.6.1.9
151
ETSI TS 136 508 V15.5.0 (2019-07)
Physical layer parameters for DCI format 6-0B
Default physical layer parameters for DCI format 6-0B are specified in table 4.3.6.1.9-1.
Table 4.3.6.1.9-1: Physical layer parameters for DCI format 6-0B
Parameter
Flag for format 6-0B/format 6-1B differentiation
Resource block assignment - narrowband index
Resource block assignment – UL resource allocation
Modulation and coding scheme
Repetition number
HARQ process number
New data indicator
DCI subframe repetition number
Condition
RF
SIG
Value
format 0B
nNB = 0 according to section
5.2.4 in TS 36.211= 0 according
to section 5.2.4 in TS 36.211
See TS 36.523-3 clause 7.3.3.9
Depending on test parameters.
3 bits provide the resource
allocation within the indicated
narrowband as specified in
section 8.1.3 of 36.213.
Depending on test parameters
No repetitions
3 bits as defined in section 8.0 of
36.213
Depending on test parameters, 1
bit
Set for every data
transmission/retransmission
according to the rules specified
in TS 36.321
0
Explanation
For RF, performance and RRM testing
For protocol testing
ETSI
Value in binary
"0"
Condition
RF
“0”
SIG
-
“000”
-
”00”
3GPP TS 36.508 version 15.5.0 Release 15
4.3.6.1.10
152
ETSI TS 136 508 V15.5.0 (2019-07)
Physical layer parameters for DCI format 6-1A
Default physical layer parameters for DCI format 6-1A for scheduling of PDSCH are specified in table 4.3.6.1.10-1.
Default physical layer parameters for DCI format 6-1A for scheduling of random access procedure are specified in table
4.3.6.1.10-2
Table 4.3.6.1.10-1: Physical layer parameters for DCI format 6-1A (PDSCH)
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Parameter
Flag format 6-0A/format 6-1A differentiation
Frequency hopping flag
Resource block assignment - narrowband
index
Resource block assignment – DL resource
allocation
Modulation and coding scheme
Repetition number
HARQ process number
New data indicator
Redundancy version
TPC command for PUCCH
Downlink Assignment Index
Antenna port(s) and scrambling identity
SRS request
TPMI information for precoding
PMI confirmation for precoding
HARQ-ACK resource offset
DCI subframe repetition number
153
ETSI TS 136 508 V15.5.0 (2019-07)
Value
format 6-1A
w/o Hopping
nNB = 0 according to clause 6.2.7
in TS 36.211
See TS 36.523-3 clause 7.3.3.9
Depending on test parameters
5 bits provide the resource
allocation using DL resource
allocation type 2 within the
indicated narrowband
Depending on test parameters
No repetitions
2 bits as defined in section
7.1.11 of 36.213
Depending on test parameters,
3bits for FDD, 4 bits for TDD.
Set for every data
transmission/retransmission
according to the rules specified
in TS 36.321
Depending on test parameters
0 dB (accumulated TPC)
Number of bits as specified in
TS 36.212, Table 5.3.3.1.2-2.
This field is reserved when the
configured maximum repetition
number is larger than 1 for either
PDSCH or MPDCCH.
2 bits indicating the values 0 to
3, as specified in TS 36.212,
Table 5.3.3.1.5C-1. This field is
present only if PDSCH
transmission is configured with
TM9.
1 bit. The interpretation of this
field is provided in section 8.2 of
TS 36.213.
Number of bits as specified in
TS 36.212, Table 5.3.3.1.3A-1.
Set for codebook index
according to TS 36.211 Table
6.3.4.2.3-1 or Table 6.3.4.2.3-2
corresponding to the single-layer
transmission. This field is
present only if PDSCH
transmission is configured with
TM6.
Set for every transmission, 1 for
precoding according to the latest
reported PMI on PUSCH,0 for
precoding according to the
indicated TPMI in the TPMI
information field
No offset
2 bits as defined in TS 36.213,
Table 10.1.2.1-1
0
2 bits as defined in sub-clause
9.1.5 of TS 36.213
Condition
Explanation
ETSI
Value in binary
"1"
"0"
“0”
Condition
RF
SIG
-
“00”
-
"01"
-
-
“0”
-
-
“0”
”00”
3GPP TS 36.508 version 15.5.0 Release 15
RF
SIG
154
ETSI TS 136 508 V15.5.0 (2019-07)
For RF, performance and RRM testing
For protocol testing
Table 4.3.6.1.10-2: Physical layer parameters for DCI format 6-1A (random access)
Parameter
Flag format 6-0A/format 6-1A differentiation
Frequency hopping flag
Resource block assignment - narrowband
index
Value
format 6-1A
w/o Hopping
nNB = 0 according to clause 6.2.7
in TS 36.211
See TS 36.523-3 clause 7.3.3.9
Value in binary
"1"
"0"
“0”
Condition
RF
SIG
Resource block assignment – DL resource
All 5 bits set to 1
“11111”
allocation
Preamble Index
0
“000000”
PRACH Mask Index
All
“0000”
Starting CE level
Level 0
“00”
NOTE:
All the remaining bits in format 6-1A for compact scheduling assignment of one PDSCH
codeword are set to zero
Condition
Explanation
For RF, performance and RRM testing
For protocol testing
RF
SIG
4.3.6.1.11
Physical layer parameters for DCI format 6-1B
Default physical layer parameters for DCI format 6-1B are specified in table 4.3.6.1.11-1.
Table 4.3.6.1.11-1: Physical layer parameters for DCI format 6-1B
Parameter
Flag for format 6-0B/format 6-1B differentiation
Resource block assignment - narrowband index
Resource block assignment - DL resource
allocation
Modulation and coding scheme
Repetition number
HARQ process number
New data indicator
HARQ-ACK resource offset
DCI subframe repetition number
Condition
RF
SIG
Value
format 6-1B
nNB = 0 according to clause 6.2.7
in TS 36.211
See TS 36.523-3 clause 7.3.3.9
6 PRBs
Depending on test parameters
No repetitions
3 bits as defined in section 8.0 of
36.213
Depending on test parameters, 1
bit
Set for every data
transmission/retransmission
according to the rules specified
in TS 36.321
No offset
2 bits as defined in TS 36.213,
Table 10.1.2.1-1
0–
2 bits as defined in sub-clause
9.1.5 of TS 36.213
Explanation
For RF, performance and RRM testing
For protocol testing
ETSI
Value in binary
"1"
”0”
Condition
RF
SIG
“1”
“000”
-
-
“0”
”00”
3GPP TS 36.508 version 15.5.0 Release 15
4.3.6.1.12
155
ETSI TS 136 508 V15.5.0 (2019-07)
Physical layer parameters for DCI format 6-2
Default physical layer parameters for DCI format 6-2 are specified in table 4.3.6.1.12-1 for direct indication and in
Table 4.3.6.1.12-2 for paging.
Table 4.3.6.1.12-1: Physical layer parameters for DCI format 6-2 for direct Indication (Flag=0)
Parameter
Flag for paging/direct indication differentiation
Value
Direct indication
8 bits provide direct indication of
system information update and
other fields, as defined in TS
36.331.
Reserved information bits are
added until the size is equal to
that of format 6-2 with Flag=1
Direct Indication information
Reserved
Value in binary
“0”
-
-
Table 4.3.6.1.12-2: Physical layer parameters for DCI format 6-2 for paging (Flag=1)
Parameter
Flag for paging/direct indication differentiation
Resource block assignment
Modulation and coding scheme
Repetition number
Value
Paging
Depending on test parameters
Depending on test parameters
{1,2,4,8}
0
2 bits as defined in sub-clause
9.1.5 of TS 36.213
DCI subframe repetition number
4.4
Value in binary
“1”
Not configured
”00”
Reference system configurations
The reference system configurations specified in this sub clause apply to all test cases unless otherwise specified.
4.4.1
Simulated network scenarios
The UE will eventually have to operate in either single mode networks (FDD or TDD), dual mode networks
(FDD+TDD), or inter-RAT networks ((FDD or TDD) + (UTRA FDD, UTRA TDD, GSM, HRPD or 1xRTT)).
For
Simulated network scenarios to be tested are listed in this sub clause.
NOTE 1: The number of cells specified does not necessarily correspond to the maximum number of resources to be
configured simultaneously in test equipment. Please refer to Table 6.1-1 for such information.
NOTE 2: For NAS test cases see sub clause 6.3.2.
4.4.1.1
Single cell network scenarios
For FDD and TDD basic single cell environment, Cell 1 is used.
4.4.1.2
E-UTRA single mode multi cell network scenarios
For FDD or TDD basic intra-frequency multi cell environment, Cell 1, Cell 2 and Cell 4 are used.
For FDD or TDD basic inter-frequency multi cell environment, Cell 1, Cell 3 and Cell 6 are used.
For FDD or TDD basic inter-band cell environment, Cell 1 and Cell 10 are used.
For FDD or TDD multi tracking area intra-frequency multi cell environment, Cell 1 and Cell 11 are used.
For FDD or TDD multi tracking area inter-frequency multi cell environment, Cell 1 and Cell 23 are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
156
ETSI TS 136 508 V15.5.0 (2019-07)
For FDD or TDD multi PLMN inter-frequency multi cell environment, Cell 1, Cell 12, Cell 13 and Cell 14 are used.
4.4.1.3
E-UTRA dual mode multi cell network scenarios
For FDD and TDD basic multi cell environment, Cell 1, Cell 10 and Cell 31 are used.
For FDD and TDD multi PLMN multi cell environment, Cell 1, Cell 28, Cell 29 and Cell 30 are used.
In addition, E-UTRA single mode multi cell network scenarios defined in clause 4.4.1.2 are combined with the dual
mode scenarios defined in this clause when additional intra or inter-frequency cells are used.
4.4.1.4
3GPP Inter-RAT network scenarios
For FDD and TDD basic inter-RAT cell environment with UTRA FDD or UTRA TDD, Cell 1 and Cell 5 are used.
For FDD and TDD inter-RAT cell environment with multi UTRA FDD or UTRA TDD cells, Cell 1 and Cell 7, Cell 8
and Cell 9 is used.
For FDD and TDD inter-RAT cell environment with GERAN, Cell 1 and Cell 24 are used.
For FDD and TDD inter-RAT cell environment with multi GERAN cells, Cell 1 and Cell 25, Cell 26 are used.
For FDD and TDD inter-RAT cell environment with (UTRA FDD or UTRA TDD) and GERAN, Cell 1, Cell 5 and Cell
24 are used.
4.4.1.5
3GPP2 Inter-RAT network scenarios
For FDD and TDD inter-RAT cell environment with HRPD, Cell 1 and Cell 15 are used.
For FDD and TDD inter-RAT cell environment with multi HRPD cells, Cell 1 and Cell 15, Cell 16 and Cell 17 are
used.
For FDD and TDD inter-RAT cell environment with 1xRTT, Cell 1 and Cell 19 are used.
For FDD and TDD inter-RAT cell environment with multi 1xRTT cells, Cell 1 and Cell 19, Cell 20 and Cell 21 are
used.
4.4.1.6
WLAN Inter-RAT network scenarios
For FDD and TDD inter-RAT cell environment with WLAN, Cell 1 and Cell 27 are used.
4.4.2
Simulated cells
NOTE: For NAS test cases see subclause 6.3.2.
NOTE: Test frequency and range defined in table 4.4.2-1 do not apply to 36.521-1 test cases.
Test frequencies and simulated cells are defined in table 4.4.2-1. For E-UTRA cells, f1 is the default test frequency. For
UTRA cells, f8 is the default test frequency. For GERAN cells, f11 is the default test frequency. For CDMA2000
HRPD cells, f14 is the default test frequency. For CDMA 2000 1xRTT cells, f17 is the default test frequency. For
WLAN cells, f20 is the default test frequency.
Default parameters for simulated cells are specified in table 4.4.2-1A and table 4.4.2-2.
Common parameters for simulated cells are specified in subclauses 4.4.3 to 4.4.6A.
Other cell specific parameters are specified in subclause 4.4.7.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
157
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.2-1: Definition of test frequencies and simulated cells
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Test
frequency
f1
ETSI TS 136 508 V15.5.0 (2019-07)
Operating band
Range
E-UTRA
Operating band under test
Cell 1, Cell 1a, Cell 2, Cell 4,
Cell 11 (Note 4)
f2
E-UTRA
Operating band under test
f3
E-UTRA
Operating band under test
f4
f5
E-UTRA
E-UTRA
Operating band under test
Operating band for inter-band cells
f6
E-UTRA
Operating band for inter-band cells
f7
E-UTRA
Operating band for inter-band cells
f8
UTRA
Operating band for UTRA cells
f9
UTRA
Operating band for UTRA cells
f10
UTRA
Operating band for UTRA cells
f11
GERAN
Operating band for GERAN cells
f12
GERAN
Operating band for GERAN cells
f13
GERAN
Operating band for GERAN cells
f14
Low
(Note 9)
Mid
Cell 18
High
Cell 21
Low
Cell 22
f20
f21
CDMA2000
HRPD
CDMA2000
HRPD
CDMA2000
HRPD
CDMA2000
1xRTT
CDMA2000
1xRTT
CDMA2000
1xRTT
WLAN
E-UTRA
Mid
(Note 1,
Note 5,
Note 8)
High
(Note 1,
Note 6,
Note 8)
Low
(Note 1,
Note 7,
Note 8)
(Note 1)
Mid
(Note 1)
High
(Note 1)
Low
(Note 1)
Mid
(Note 2)
High
(Note 2)
Low
(Note 2)
Mid
(Note 3)
High
(Note 3)
Low
(Note 3)
Mid
(Note 9)
High
f22
E-UTRA
f23
E-UTRA
f24
UTRA
f25
UTRA
f26
UTRA
f15
f16
f17
f18
f19
RAT
158
Operating band for CDMA2000
HRPD cells
Operating band for CDMA2000
HRPD cells
Operating band for CDMA2000
HRPD cells
Operating band for CDMA2000
1xRTT cells
Operating band for CDMA2000
1xRTT cells
Operating band for CDMA2000
1xRTT cells
Operating band for WLAN AP's
Operating band for Inter-band cells
(third band)
Operating band for Inter-band cells
(third band)
Operating band for Inter-band cells
(third band)
Operating band for Inter-RATcells
(third band)
Operating band for Inter-RATcells
(third band)
Operating band for Inter-RATcells
(third band)
ETSI
Mid
Low
(Note 10)
Mid
(Note 10)
High
(Note 10)
Low
(Note 10)
Mid
(Note 10)
High
(Note 10)
Simulated cells
Cell 3, Cell 12, Cell 23
Cell 6, Cell 13
Cell 14
Cell 10, Cell 30, Cell 31
Cell 28, Cell 29, Cell 36 (Note
10)
Cell 35 (Note 10)
Cell 5, Cell 7
Cell 8
Cell 9
Cell 24
Cell 25
Cell 26
Cell 15, Cell 16
Cell 17
Cell 19, Cell 20
Cell 27, Cell 27a
Cell 32
Cell 33
Cell 34
Cell 37
Cell 38
Cell 39
3GPP TS 36.508 version 15.5.0 Release 15
159
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
ETSI TS 136 508 V15.5.0 (2019-07)
For signalling test, see clause 6.2.3.
See TS 34.108 [5] clause 5.1.
For signalling test, see clause 6.3.1.4. For RRM test, see clause 7.2.2.1.
For signalling test, simultaneous co-existence of Cell 2 with Cell 11 is not allowed.
For RRM test with intra-band contiguous CA, the set of contiguous component carriers are “Mid”, with
the test frequencies specified in clauses 4.3.1.1.xA for FDD and 4.3.1.2.xA for TDD
Note 6: For RRM test with intra-band contiguous CA, the set of contiguous component carriers are “High”,
with the test frequencies specified in clauses 4.3.1.1.xA for FDD and 4.3.1.2.xA for TDD
Note 7: For RRM test with intra-band contiguous CA, the set of contiguous component carriers are “Low”, with
the test frequencies specified in clauses 4.3.1.1.xA for FDD and 4.3.1.2.xA for TDD.
Note 8: For RRM test with intra-band non-contiguous CA, the test frequencies for the set of non-contiguous
component carriers are specified in clauses 4.3.1.1.xA for FDD and 4.3.1.2.xA for TDD without any
regard to range. Thus “Low”, “Mid” and “High” information in this table does not apply. Unless
otherwise stated, test point with maximum Wgap is chosen.
Note 9: For signalling test with band combination E-UTRA band 25 or EUTRA band 2 and HRPD/1xRTT band
Class 1, F14 is ‘low' and F16 is ‘Mid’.
Note 10: For RRM IncMon Test Cases.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
160
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.2-1A: Default E-UTRA parameters for simulated cells
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
cell
ID
E-UTRAN Cell Identifier
eNB Identifier
Cell 1
Cell
1a
Cell 2
Cell 3
Cell 4
Cell 6
Cell
10
Cell
11
Cell
12
Cell
13
Cell
14
Cell
23
Cell
28
Cell
29
Cell
30
Cell
31
Cell
32
Cell
33
Cell
34
Cell
35
'0000 0000
0000 0000
0001'B
'0000 0000
0000 0000
0001'B
'0000 0000
0000 0000
0001'B
'0000 0000
0000 0000
0010'B
'0000 0000
0000 0000
0011'B
'0000 0000
0000 0000
0100'B
'0000 0000
0000 0000
0101'B
'0000 0000
0000 0000
0110'B
'0000 0000
0000 0000
0010'B
'0000 0000
0000 0000
0100'B
'0000 0000
0000 0000
0111'B
'0000 0000
0000 0000
0110'B
'0000 0000
0000 0000
0010'B
'0000 0000
0000 0000
0100'B
'0000 0000
0000 0000
0111'B
'0000 0000
0000 0000
0110'B
'0000 0000
0000 0000
0001'B
'0000 0000
0000 0000
0001'B
'0000 0000
0000 0000
0001'B
'0000 0000
0000 0000
0001'B
161
ETSI TS 136 508 V15.5.0 (2019-07)
Physical
layer cell
identity
rootSequenceIndex or
rootSequenceIndexHighSpeed
FDD
rootSequenceIndex or
rootSequenceIndexHighSpeed
TDD
0
22
0
'0000
0001'B
1
22
0
'0000
0010'B
2
86
8
'0000
0011'B
3
22
0
'0000
0100'B
4
150
16
'0000
0110'B
6
22
0
'0000
1010'B
10
22
0
'0000
1011'B
11
214
24
'0000
1100'B
12
86
8
'0000
1101'B
13
86
8
'0000
1110'B
14
22
0
'0001
0111'B
23
150
16
'0001
1100'B
28
86
8
'0001
1101'B
29
86
8
'0001
1110'B
30
86
8
'0001
1111'B
31
214
24
'0010
0000'B
32
22
0
'0010
0001'B
33
22
0
'0010
0010'B
34
22
0
'0010
0011'B
35
22
0
Cell
Identity
'0000
0000'B
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Cell
36
'0000 0000
0000 0000
0001'B
'0010
0100'B
162
36
ETSI TS 136 508 V15.5.0 (2019-07)
22
0
Table 4.4.2-2: Default NAS parameters for simulated cells
cell ID
TA#
Tracking Area
PLMN
MCC MNC
(Note 3)
(Note 3)
(Note 3)
(Note 3)
(Note 3)
(Note 3)
(Note 3)
(Note 3)
(Note 3)
002
11
TAC
TA# list
(Note 1)
GUTI (Note 2)
MME Identifier
MME Group ID
MME Code
32769
1
32769
1
32769
1
32769
1
32769
1
32769
1
32769
1
32769
1
32769
1
32769
1
M-TMSI
Cell 1
TAI-1
1
TAI-1
Arbitrarily
selected
Cell 1a
TAI-1
1
TAI-1
according to
Cell 2
TAI-1
1
TAI-1
TS 23.003
Cell 3
TAI-1
1
TAI-1
subclause 2.8
Cell 4
TAI-1
1
TAI-1
[2].
Cell 6
TAI-1
1
TAI-1
Cell 10
TAI-1
1
TAI-1
Cell 11
TAI-2
2
TAI-2
Cell 23
TAI-2
2
TAI-2
Cell 12,
TAI-3
1
TAI-3
Cell 28
Cell 13,
TAI-4
003
21
1
TAI-4
32769
1
Cell 29
Cell 14,
TAI-5
004
31
1
TAI-5
32769
1
Cell 30
Cell 31
TAI-2
(Note 3)
2
TAI-2
32769
1
Cell 32
TAI-1
(Note 3)
1
TAI-1
32769
1
Cell 33
TAI-1
(Note 3)
1
TAI-1
32769
1
Cell 34
TAI-1
(Note 3)
1
TAI-1
32769
1
Cell 35
TAI-1
(Note 3)
1
TAI-1
32769
1
Cell 36
TAI-1
(Note 3)
1
TAI-1
32769
1
Note 1: The value(s) in the column TA# list indicates TAI(s) included in the response messages of the
registration procedure (ATTACH ACCEPT or TRACKING AREA UPDATE ACCEPT) when the UE
performs the registration procedure on a corresponding cell.
Note 2: The value in the column GUTI indicates GUTI included in the response messages of the registration
procedure (ATTACH ACCEPT or TRACKING AREA UPDATE ACCEPT) when the UE performs the
registration procedure on a corresponding cell.
Note 3: Set to the same Mobile Country Code and Mobile Network Code stored in EFIMSI on the test USIM card
(subclause 4.9.3).
Table 4.4.2-3: Default HRPD parameters for simulated cells
Cell ID
Cell 15
Cell 16
Cell 17
Cell 18
Note 1:
SectorID
ColorCode
Pilot PN Offset
CountryCode
Set according to PIXIT
Set according to PIXIT
50
(Note 1)
parameter
parameter
Set according to PIXIT
Set according to PIXIT
100
(Note 1)
parameter
parameter
Set according to PIXIT
Set according to PIXIT
150
(Note 1)
parameter
parameter
Set according to PIXIT
Set according to PIXIT
200
(Note 1)
parameter
parameter
Set to the same Mobile Country Code stored in EFIMSI on the test USIM card (subclause 4.9.3).
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
163
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.2-4: Default 1XRTT parameters for simulated cells
Cell ID
Cell 19
Cell 20
Cell 21
Cell 22
Note 1:
Note 2:
SID
NID
BASE_ID
Pilot PN Offset
REG_ZONE
MCC
IMSI_11_12
Set
Set according
50
1
Note
Note 2
according
to PIXIT
1
to PIXIT
parameter
parameter
200
Set
Set according
100
1
Note
Note 2
according
to PIXIT
1
to PIXIT
parameter
parameter
200
Set
Set according
150
2
Note
Note 2
according
to PIXIT
1
to PIXIT
parameter
parameter
200
Set
Set according
200
3
Note
Note 2
according
to PIXIT
1
to PIXIT
parameter
parameter
Set to the same Mobile Country Code stored in EFIMSI on the test USIM card (subclause 4.9.3).
Set to the same Mobile Network Code stored in EFIMSI on the test USIM card (subclause 4.9.3).
200
Table 4.4.2-5: Neighbouring cell list for 1XRTT cells
Cell ID
Cell 19
Cell 20
Cell 21
Cell 22
4.4.3
Intra Frequency
cell 20
cell 19
X
X
Inter Frequency Cells
cell 22
cell 22
cell 20
cell 20
Cell 21
Cell 21
cell 19
cell 19
X
X
cell 22
cell 21
Common parameters for simulated E-UTRA cells
The parameters specified in this sub clause apply to all simulated E-UTRA cells unless otherwise specified.
4.4.3.1
Common configurations of system information blocks
For BL/CE testing the same content of system information blocks SIB2 to SIB20 are used for broadcasting on BCCH
and/or BCCH-BR.
4.4.3.1.1
Combinations of system information blocks
The combination of system information blocks required by a test case depends on the test case scenario. In this clause,
the following combinations of system information blocks are defined.
Combination 1 is the default combination which applies to the following test case scenarios:
- E-UTRA FDD single cell scenario
- E-UTRA TDD single cell scenario
- E-UTRA FDD intra-frequency multi cell scenario
- E-UTRA TDD intra-frequency multi cell scenario
- E-UTRA FDD and E-UTRA TDD dual mode multi cell roaming scenario
Combination 2 applies to the following test case scenarios:
- E-UTRA FDD intra-frequency multi cell scenario with neighbouring cell related information
- E-UTRA TDD intra-frequency multi cell scenario with neighbouring cell related information
Combination 3 applies to the following test case scenarios:
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
164
ETSI TS 136 508 V15.5.0 (2019-07)
- E-UTRA FDD inter-frequency multi cell scenario
- E-UTRA TDD inter-frequency multi cell scenario
- E-UTRA FDD inter-band multi cell scenario
- E-UTRA TDD inter-band multi cell scenario
- E-UTRA FDD and E-UTRA TDD dual mode multi cell non-roaming scenario
- E-UTRA FDD intra-band carrier aggregation component carriers cell scenario
- E-UTRA FDD inter-band carrier aggregation component carriers cell scenario
- E-UTRA TDD intra-band carrier aggregation component carriers cell scenario
- E-UTRA FDD and E-UTRA TDD inter-band carrier aggregation component carriers cell scenario
- E-UTRA FDD dual connectivity cell scenario
- E-UTRA TDD dual connectivity cell scenario
Combination 4 applies to the following test case scenarios:
- 3GPP inter-RAT E-UTRA FDD + UTRA FDD multi cell scenario
- 3GPP inter-RAT E-UTRA TDD + UTRA LCR TDD multi cell scenario
- 3GPP inter-RAT E-UTRA TDD + UTRA FDD multi cell scenario
Combination 5 applies to the following test case scenarios:
- 3GPP inter-RAT E-UTRA FDD + GERAN multi cell scenario
- 3GPP inter-RAT E-UTRA TDD + GERAN multi cell scenario
Combination 6 applies to the following test case scenarios:
- 3GPP2 inter-RAT E-UTRA FDD + HRPD multi cell scenario
- 3GPP2 inter-RAT E-UTRA TDD + HRPD multi cell scenario
- 3GPP2 inter-RAT E-UTRA FDD + 1xRTT multi cell scenario
- 3GPP2 inter-RAT E-UTRA TDD + 1xRTT multi cell scenario
Combination 7 applies to the following test case scenarios:
- E-UTRA FDD + home eNB multi cell scenario
- E-UTRA TDD + home eNB multi cell scenario
Combination 8 applies to the following test case scenarios:
- E-UTRA FDD ETWS single cell scenario
- E-UTRA TDD ETWS single cell scenario
Combination 9 applies to the following test case scenarios:
- E-UTRA FDD inter-frequency + 3GPP inter-RAT UTRA multi-cell scenario
- E-UTRA TDD inter-frequency + 3GPP inter-RAT UTRA multi-cell scenario
Combination 10 applies to the following test case scenarios:
- 3GPP inter-RAT E-UTRA FDD + UTRA FDD + GERAN multi cell scenario
- 3GPP inter-RAT E-UTRA TDD + UTRA LCR TDD + GERAN multi cell scenario.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
165
ETSI TS 136 508 V15.5.0 (2019-07)
Combination 10a applies to the following test case scenarios:
- E-UTRA FDD inter-frequency + 3GPP inter-RAT E-UTRA FDD + UTRA FDD + GERAN multi cell scenario
- E-UTRA TDD inter-frequency + 3GPP inter-RAT E-UTRA TDD + UTRA LCR TDD + GERAN multi cell
scenario
Combination 11 applies to the following test case scenarios:
- 3GPP inter-RAT E-UTRA FDD + UTRA FDD + home eNB multi cell scenario
- 3GPP inter-RAT E-UTRA TDD + UTRA LCR TDD + home eNB multi cell scenario
Combination 12 applies to the following test case scenarios:
- E-UTRA FDD inter-frequency + GERAN cell scenario
- E-UTRA TDD inter-frequency + GERAN cell scenario
Combination 13 applies to the following test case scenarios:
- E-UTRA FDD inter-frequency + home eNB
- E-UTRA TDD inter-frequency + home eNB
Combination 14 applies to the following test case scenarios:
- 3GPP inter-RAT E-UTRA FDD + GERAN + home eNB multi cell scenario
- 3GPP inter-RAT E-UTRA TDD + GERAN + home eNB multi cell scenario
Combination 15 applies to the following test case scenarios:
- 3GPP E-UTRA FDD single cell scenario + MBMS
- 3GPP E-UTRA TDD single cell scenario + MBMS
- 3GPP E-UTRA FDD intra-frequency multi cell scenario + MBMS
- 3GPP E-UTRA TDD intra-frequency multi cell scenario + MBMS
Combination 16 applies to the following test case scenarios:
- 3GPP E-UTRA FDD inter-frequency multi cell scenario + MBMS
- 3GPP E-UTRA TDD inter-frequency multi cell scenario + MBMS
Combination 17 applies to the following test case scenarios:
- 3GPP E-UTRA FDD + CMAS single cell scenario
- 3GPP E-UTRA TDD + CMAS single cell scenario
Combination 18 applies to the following test case scenarios:
- 3GPP E-UTRA FDD + MBMS inter-frequency multi cell scenario (non-MBMS cell broadcasting SIB15)
- 3GPP E-UTRA TDD + MBMS inter-frequency multi cell scenario (non-MBMS cell broadcasting SIB15)
- 3GPP E-UTRA FDD + SC-PTM inter-frequency multi cell scenario (non- SC-PTM cell broadcasting SIB15)
- 3GPP E-UTRA TDD + SC-PTM inter-frequency multi cell scenario (non- SC-PTM cell broadcasting SIB15)
Combination 19 applies to the following test case scenarios:
- 3GPP E-UTRA FDD + MBMS intra-frequency multi cell scenario (MBMS cell broadcasting SIB15)
- 3GPP E-UTRA TDD + MBMS intra-frequency multi cell scenario (MBMS cell broadcasting SIB15)
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
166
ETSI TS 136 508 V15.5.0 (2019-07)
Combination 20 applies to the following test case scenarios:
- 3GPP E-UTRA FDD + MBMS inter-frequency multi cell scenario (MBMS cell broadcasting SIB15)
- 3GPP E-UTRA TDD + MBMS inter-frequency multi cell scenario (MBMS cell broadcasting SIB15)
- 3GPP E-UTRA FDD + MBMS inter-band multi cell scenario (MBMS cell broadcasting SIB15)
- 3GPP E-UTRA TDD + MBMS inter-band multi cell scenario (MBMS cell broadcasting SIB15)
Combination 21 applies to the following test case scenarios:
- E-UTRA FDD SIMTC single cell scenario
- E-UTRA TDD SIMTC single cell scenario
Combination 22 applies to the following test case scenarios:
- RAN assisted WLAN offload: E-UTRA FDD + WLAN AP scenarios
- RAN assisted WLAN offload: E-UTRA TDD + WLAN AP scenarios
Combination 23 is the default combination which applies to the following test case scenarios:
- E-UTRA FDD single cell scenario + sidelink direct communication
- E-UTRA TDD single cell scenario + sidelink direct communication
- E-UTRA FDD intra-frequency multi cell scenario + sidelink direct communication
- E-UTRA TDD intra-frequency multi cell scenario + sidelink direct communication
Combination 24 is the default combination which applies to the following test case scenarios:
- E-UTRA FDD single cell scenario + sidelink direct discovery
- E-UTRA TDD single cell scenario + sidelink direct discovery
- E-UTRA FDD intra-frequency multi cell scenario + sidelink direct discovery
- E-UTRA TDD intra-frequency multi cell scenario + sidelink direct discovery
Combination 25 applies to the following test case scenarios:
- 3GPP E-UTRA FDD single cell scenario + SC-PTM
- 3GPP E-UTRA TDD single cell scenario + SC-PTM
- 3GPP E-UTRA FDD intra-frequency multi cell scenario + SC-PTM
- 3GPP E-UTRA TDD intra-frequency multi cell scenario + SC-PTM
Combination 26 applies to the following test case scenarios:
- 3GPP E-UTRA FDD inter-frequency multi cell scenario + SC-PTM
- 3GPP E-UTRA TDD inter-frequency multi cell scenario + SC-PTM
Combination 27 applies to the following test case scenarios:
- 3GPP E-UTRA FDD + SC-PTM intra-frequency multi cell scenario (SC-PTM cell broadcasting SIB15)
- 3GPP E-UTRA TDD + SC-PTM intra-frequency multi cell scenario (SC-PTM cell broadcasting SIB15)
Combination 28 applies to the following test case scenarios:
- 3GPP E-UTRA FDD + SC-PTM inter-frequency multi cell scenario (SC-PTM cell broadcasting SIB15)
- 3GPP E-UTRA TDD + SC-PTM inter-frequency multi cell scenario (SC-PTM cell broadcasting SIB15)
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
167
ETSI TS 136 508 V15.5.0 (2019-07)
- 3GPP E-UTRA FDD + SC-PTM inter-band multi cell scenario (SC-PTM cell broadcasting SIB15)
- 3GPP E-UTRA TDD + SC-PTM inter-band multi cell scenario (SC-PTM cell broadcasting SIB15)
Combination 29 is the default combination which applies to the following test case scenarios:
- E-UTRA FDD single cell scenario + V2X sidelink communication.
- E-UTRA TDD single cell scenario + V2X sidelink communication.
- E-UTRA FDD intra-frequency multi cell scenario + V2X sidelink communication.
- E-UTRA TDD intra-frequency multi cell scenario + V2X sidelink communication.
- E-UTRA FDD inter-frequency + V2X sidelink communication with inter-frequency scheduling
- E-UTRA TDD inter-frequency + V2X sidelink communication with inter-frequency scheduling
- E-UTRA FDD inter-band + V2X sidelink communication with inter-frequency scheduling
- E-UTRA TDD inter-band + V2X sidelink communication with inter-frequency scheduling
Combination 30 applies to the following test case scenarios:
- E-UTRA FDD intra-band carrier aggregation component carriers cell scenario + E-UTRA FDD intra-frequency
neighbour.
- E-UTRA FDD inter-band carrier aggregation component carriers cell scenario+ E-UTRA FDD intra-frequency
neighbour.
- E-UTRA TDD intra-band carrier aggregation component carriers cell scenario+ E-UTRA FDD intra-frequency
neighbour.
- E-UTRA FDD and E-UTRA TDD inter-band carrier aggregation component carriers cell scenario+ E-UTRA FDD
intra-frequency neighbour.
Combination 31 applies to the following test case scenarios:
-
3GPP inter-RAT E-UTRA FDD + NR FDD multi cell scenario
-
3GPP inter-RAT E-UTRA FDD + NR TDD multi cell scenario
-
3GPP inter-RAT E-UTRA TDD + NR FDD multi cell scenario
-
3GPP inter-RAT E-UTRA TDD + NR TDD multi cell scenario
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
168
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.1.1-1: Combinations of system information blocks
Combination
No.
1
2
3
4
5
6
7
8
9
10
10a
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
4.4.3.1.2
SI
B2
SI
B3
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
SI
B4
SI
B5
SI
B6
SI
B7
SI
B8
System information block type
SI
SI
SI
SI
SI
SI
B9 B1 B1 B1 B1
B
0
1
2
3
14
SI
B
15
SI
B
17
SI
B
18
SI
B
19
SI
B
20
SI
B2
1
SI
B
24
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Scheduling of system information blocks
The scheduling configurations for combinations of system information blocks are defined in the following tables.
Table 4.4.3.1.2-1: Scheduling for combination 1
Scheduling
Information No.
1
2
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
Table 4.4.3.1.2-2: Scheduling for combination 2
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
ETSI
Mapping of system information
blocks
SIB2
SIB3
SIB4
3GPP TS 36.508 version 15.5.0 Release 15
169
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.1.2-3: Scheduling for combination 3
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB5
Table 4.4.3.1.2-4: Scheduling for combination 4
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB6
Table 4.4.3.1.2-5: Scheduling for combination 5
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB7
Table 4.4.3.1.2-6: Scheduling for combination 6
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB8
Table 4.4.3.1.2-7: Scheduling for combination 7
Scheduling
Information No.
1
2
3
4
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB4
SIB9
Table 4.4.3.1.2-8: Scheduling for combination 8
Scheduling
Information No.
1
2
3
4
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB11
SIB10
Table 4.4.3.1.2-9: Scheduling for combination 9
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
ETSI
Mapping of system information
blocks
SIB2
SIB3
SIB5, SIB6
3GPP TS 36.508 version 15.5.0 Release 15
170
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.1.2-10: Scheduling for combination 10
Scheduling
Information No.
1
2
3
4
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB6
SIB7
Table 4.4.3.1.2-10a: Scheduling for combination 10a
Scheduling
Information No.
1
2
3
4
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB5, SIB6
SIB7
Table 4.4.3.1.2-11: Scheduling for combination 11
Scheduling
Information No.
1
2
3
4
5
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB4
SIB6
SIB9
Table 4.4.3.1.2-12: Scheduling for combination 12
Scheduling
Information No.
1
2
3
4
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB5
SIB7
Table 4.4.3.1.2-13: Scheduling for combination 13
Scheduling
Information No.
1
2
3
4
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB4
SIB5
Table 4.4.3.1.2-14: Scheduling for combination 14
Scheduling
Information No.
1
2
3
4
5
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
ETSI
Mapping of system information
blocks
SIB2
SIB3
SIB4
SIB7
SIB9
3GPP TS 36.508 version 15.5.0 Release 15
171
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.1.2-15: Scheduling for combination 15
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB13
Table 4.4.3.1.2-16: Scheduling for combination 16
Scheduling
Information No.
1
2
3
4
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB5
SIB13
Table 4.4.3.1.2-17: Scheduling for combination 17
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB12
Table 4.4.3.1.2-18: Scheduling for combination 18
Scheduling
Information No.
1
2
3
4
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB5
SIB15
Table 4.4.3.1.2-19: Scheduling for combination 19
Scheduling
Information No.
1
2
3
4
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB13
SIB15
Table 4.4.3.1.2-20: Scheduling for combination 20
Scheduling
Information No.
1
2
3
4
5
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
ETSI
Mapping of system information
blocks
SIB2
SIB3
SIB5
SIB13
SIB15
3GPP TS 36.508 version 15.5.0 Release 15
172
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.1.2-21: Scheduling for combination 21
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB14
Table 4.4.3.1.2-22: Scheduling for combination 22
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB17
Table 4.4.3.1.2-23: Scheduling for combination 23
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB18
Table 4.4.3.1.2-24: Scheduling for combination 24
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB19
Table 4.4.3.1.2-25: Scheduling for combination 25
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB20
Table 4.4.3.1.2-26: Scheduling for combination 26
Scheduling
Information No.
1
2
3
4
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB5
SIB20
Table 4.4.3.1.2-27: Scheduling for combination 27
Scheduling
Information No.
1
2
3
4
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
ETSI
Mapping of system information
blocks
SIB2
SIB3
SIB15
SIB20
3GPP TS 36.508 version 15.5.0 Release 15
173
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.1.2-28: Scheduling for combination 28
Scheduling
Information No.
1
2
3
4
5
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB5
SIB15
SIB20
Table 4.4.3.1.2-29: Scheduling for combination 29
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB21
Table 4.4.3.1.2-30: Scheduling for combination 30
Scheduling
Information No.
1
2
3
4
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB4
SIB5
Table 4.4.3.1.2-31: Scheduling for combination 31
Scheduling
Information No.
1
2
3
Periodicity
[radio frames]
16
See sub clause 4.4.3.4
See sub clause 4.4.3.4
Mapping of system information
blocks
SIB2
SIB3
SIB24
4.4.3.2
Common contents of system information messages
-
MasterInformationBlock
The MasterInformationBlock includes the system information transmitted on BCH.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
174
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.2-1: MasterInformationBlock
Derivation Path: 36.331 clause 6.2.2
Information Element
MasterInformationBlock ::= SEQUENCE {
dl-Bandwidth
phich-Config SEQUENCE {}
systemFrameNumber
Value/remark
Downlink system
bandwidth under test.
PHICH-Config-DEFAULT
schedulingInfoSIB1-BR-r13
A valid value as defined
in TS 36.331 [17]
0
schedulingInfoSIB1-BR-r13
10
spare
spare
'0000 0000 00'B
'0000 0'B
Comment
Condition
See subclause
4.6.3
Value 0 means
that
SystemInformatio
nBlockType1-BR
is not scheduled.
4 PDSCH
repetitions and
504 bits TBS
carrying for
PDSCH carrying
SystemInformatio
nBlockType1-BR
(TS 36.213 [23]
Table 7.1.6.1 and
Table 7.1.7.2.7-1)
CEmodeA,
CEmodeB
CEmodeA,
CEmodeB
}
Condition
CEmodeA
CEmodeB
-
Explanation
CE mode A test environment
CE mode B test environment
SystemInformation
The SystemInformation message is used to convey one or more System Information Blocks. All the SIBs included are
transmitted with the same periodicity.
Table 4.4.3.2-2: SystemInformation
Derivation Path: 36.331 clause 6.2.2
Information Element
SystemInformation ::= SEQUENCE {
criticalExtensions CHOICE {
systemInformation-r8 SEQUENCE {
sib-TypeAndInfo SEQUENCE (SIZE
(1..maxSIB)) OF CHOICE {}
criticalExtensionsFuture SEQUENCE {}
}
}
}
-
Value/remark
Comment
Condition
See subclause 4.4.3.1
Not present
SystemInformation-BR-r13
The SystemInformation-BR-r13 message is used to convey one or more System Information Blocks for Bandwith
Redused cell envirionment . All the SIBs included are transmitted with the same periodicity.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
175
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.2-2A: SystemInformation-BR-r13
Derivation Path: 36.331 clause 6.2.2
Information Element
SystemInformation-BR-r13 ::= SEQUENCE {
criticalExtensions CHOICE {
systemInformation-r8 SEQUENCE {
sib-TypeAndInfo SEQUENCE (SIZE
(1..maxSIB)) OF CHOICE {}
criticalExtensionsFuture SEQUENCE {}
}
}
}
Value/remark
See subclause 4.4.3.1
Not present
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
176
ETSI TS 136 508 V15.5.0 (2019-07)
SystemInformationBlockType1
SystemInformationBlockType1 contains information relevant when evaluating if a UE is allowed to access a cell and
defines the scheduling of other system information.
Table 4.4.3.2-3: SystemInformationBlockType1
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.2.2
Information Element
SystemInformationBlockType1 ::=
SEQUENCE {
cellAccessRelatedInfo SEQUENCE {
plmn-IdentityList SEQUENCE (SIZE (1..6))
OF SEQUENCE {
plmn-Identity[1] SEQUENCE {
mcc SEQUENCE (SIZE (3)) OF MCCNMC-Digit
mnc SEQUENCE (SIZE (2..3)) OF MCCNMC-Digit
}
cellReservedForOperatorUse[1]
}
trackingAreaCode
cellIdentity
cellBarred
intraFreqReselection
csg-Indication
csg-Identity
}
cellSelectionInfo SEQUENCE {
q-RxLevMin
177
Value/remark
freqBandIndicator
schedulingInfoList SEQUENCE (SIZE
(1..maxSI-Message)) OF SEQUENCE {}
tdd-Config SEQUENCE {}
tdd-Config SEQUENCE {}
si-WindowLength
systemInfoValueTag
nonCriticalExtension SEQUENCE {
lateNonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
freqBandIndicator-v9e0
}
}
nonCriticalExtension SEQUENCE {
ims-EmergencySupport-r9
cellSelectionInfo-v920 SEQUENCE {}
cellSelectionInfo-v920 SEQUENCE {
q-QualMin-r9
q-QualMinOffset-r9
Comment
Condition
1 entry
See table 4.4.2-2
See table 4.4.2-2
For NAS test cases, see table
6.3.2.2-1.
For NAS test cases, see table
6.3.2.2-1.
notReserved
See table 4.4.2-2
For NAS test cases, see table
6.3.2.2-1.
Cell ID for the
simulated cell
notBarred
notAllowed
FALSE
Not present
-70 (-140 dBm)
-53 (-106 dBm)
-27 (-54dBm)
q-RxLevMinOffset
}
p-Max
freqBandIndicator
ETSI TS 136 508 V15.5.0 (2019-07)
For RF/RRM test cases
For signalling test cases in
normal coverage
For signalling test cases in
enhanced coverage
The value has been selected
such that the UE at signal
levels for ”Serving cell” and
“Suitable neighbour intrafrequency cell” are applied
then the cell selection criterion
for normal coverage is not
fullfilled.
RF
maxFBI
Band > 64
See subclause 4.6.3
FDD
TDD
SIG AND (
CEmodeA
OR
CEmodeB)
Not present
Not present
Operating band
under test.
64
See subclause
4.4.3.1
Not present
TDD-ConfigDEFAULT
ms20
To allow sufficient number of
retransmissions.
0
Not present
Band > 64
Operating band
under test.
True
Support IMS emergency call in
limited service mode.
Not present
QBASED
-20 (-20dB)
Not present
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
}
nonCriticalExtension SEQUENCE {
tdd-Config-v1130
cellSelectionInfo-v1130
nonCriticalExtension
nonCriticalExtension SEQUENCE {
cellAccessRelatedInfo-v1250
SEQUENCE {
category0Allowed-r12
}
cellSelectionInfo-v1250
freqBandIndicatorPriority-r12
nonCriticalExtension SEQUENCE{
hyperSFN-r13
eDRXAllowed-r13
cellSelectionInfoCE-r13
bandwidthReducedAccessRelatedInfor13
nonCriticalExtension SEQUENCE {
eCallOverIMS-Support-r14
tdd-Config-v1430
cellAccessRelatedInfoList-r14
SEQUENCE { }
nonCriticalExtension
}
}
}
}
}
}
}
Condition
FDD
TDD
QBASED
UECAT0
RF
SIG
CEmodeA
CEmodeB
Band > 64
eCalloverIMS
178
ETSI TS 136 508 V15.5.0 (2019-07)
Not present
Not present
Not present
Not present
UECAT0
True
Cat 0 Allowed
Not present
Not present
Not present
Not present
Not present
Not present
eCalloverIM
S
True
Support eCall over IMS
services.
Not present
Not present
Not present
Explanation
FDD cell environment
TDD cell environment
This condition applies to Quality based cell (re)selection signalling test cases.
This condition applies when UE under test is a UE of Category 0.
For RF, performance and RRM testing
For protocol testing
CE mode A test environment
CE mode B test environment
If band > 64 is selected
eCall over IMS test environment
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
179
ETSI TS 136 508 V15.5.0 (2019-07)
SystemInformationBlockType1-BR-r13
SystemInformationBlockType1-BR-r13 contains information relevant when evaluating if a UE in a Bandwith Reduced
cell environment is allowed to access a cell and defines the scheduling of other system information.
Table 4.4.3.2-3A: SystemInformationBlockType1-BR-r13
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.2.2
Information Element
SystemInformationBlockType1-BR-r13 ::=
SEQUENCE {
cellAccessRelatedInfo SEQUENCE {
plmn-IdentityList SEQUENCE (SIZE (1..6)) OF
SEQUENCE {
plmn-Identity[1] SEQUENCE {
mcc SEQUENCE (SIZE (3)) OF MCC-NMCDigit
mnc SEQUENCE (SIZE (2..3)) OF MCC-NMCDigit
}
cellReservedForOperatorUse[1]
}
trackingAreaCode
cellIdentity
cellBarred
intraFreqReselection
csg-Indication
csg-Identity
}
cellSelectionInfo SEQUENCE {
q-RxLevMin
q-RxLevMinOffset
}
p-Max
freqBandIndicator
freqBandIndicator
schedulingInfoList SEQUENCE (SIZE (1..maxSIMessage)) OF SEQUENCE {}
tdd-Config SEQUENCE {}
tdd-Config SEQUENCE {}
si-WindowLength
systemInfoValueTag
nonCriticalExtension SEQUENCE {
lateNonCriticalExtension
nonCriticalExtension SEQUENCE {
freqBandIndicator-v9e0
}
}
nonCriticalExtension SEQUENCE {
ims-EmergencySupport-r9
cellSelectionInfo-v920 SEQUENCE {}
cellSelectionInfo-v920 SEQUENCE {
q-QualMin-r9
q-QualMinOffset-r9
}
nonCriticalExtension SEQUENCE {
tdd-Config-v1130
180
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
Condition
1 entry
See table
4.4.2-2
See table
4.4.2-2
For NAS test cases, see
table 6.3.2.2-1.
For NAS test cases, see
table 6.3.2.2-1.
notReserved
See table
4.4.2-2
Cell ID for the
simulated cell
notBarred
notAllowed
FALSE
Not present
For NAS test cases, see
table 6.3.2.2-1.
-70 (-140
dBm)
-27 (-54 dBm)
For RF/RRM test cases
RF
For signalling test cases
-53 (-106
dBm)
For signalling test cases
SIG and
ENHANCED
COVERAGE
SIG and
NORMAL
COVERAGE
Not present
Not present
Operating
band under
test.
64
See subclause
4.4.3.1
Not present
TDD-ConfigDEFAULT
ms20
maxFBI
Band > 64
See subclause 4.6.3
FDD
TDD
To allow sufficient number of
retransmissions.
0
Not present
Band > 64
Operating
band under
test.
True
Support IMS emergency call
in limited service mode.
Not present
QBASED
-20 (-20dB)
Not present
Not present
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
cellSelectionInfo-v1130
nonCriticalExtension SEQUENCE {
cellAccessRelatedInfo-v1250 SEQUENCE {
category0Allowed-r12
category0Allowed-r12
}
cellSelectionInfo-v1250
freqBandIndicatorPriority-r12
nonCriticalExtension SEQUENCE {
hyperSFN-r13
eDRX-Allowed-r13
eDRX-Allowed-r13
cellSelectionInfoCE-r13
bandwidthReducedAccessRelatedInfo-r13
SEQUENCE {
si-WindowLength-BR-r13
si-RepetitionPattern-r13
schedulingInfoList-BR-r13 SEQUENCE
(SIZE (1..maxSI-Message)) OF SEQUENCE {
si-Narrowband-r13[1]
si-Narrowband-r13[1]
si-TBS-r13[1]
….
si-Narrowband-r13[n]
si-Narrowband-r13[n]
si-TBS-r13[n]
181
Not present
Not Present
True
Not present
Not present
True
CellSelectionIn
foCE-r13DEFAULT
To allow sufficient number of
retransmissions.
every2ndRF
ENUMERATED {everyRF,
every2ndRF, every4thRF,
every8thRF}
n is the same number of
entries, and listed in the
same order, as in
SchedulingInfoList (without
suffix)
n entries
1
2
b712
20MHz BW
1
2
b712
20MHz BW
fdd-UplinkSubframeBitmapBR-r13
Not present
startSymbolBR-r13
3
2
off
True
n entries
}
nonCriticalExtension
nonCriticalExtension SEQUENCE {
freqHoppingParametersDL-r13
SEQUENCE {
mpdcch-pdsch-HoppingNB-r13
intervalDLHoppingConfigCommonModeA-r13 CHOICE {
interval-FDD-r13
interval-TDD-r13
UECAT0
eDRX
ms20
Not present
SystemInfoValueTagSI-r13[1]
….
SystemInfoValueTagSI-r13[n]
Cat 0 Allowed
Not present
Not present
}
fdd-DownlinkOrTddSubframeBitmapBR-r13
si-HoppingConfigCommon-r13
si-ValidityTime-r13
systemInfoValueTagList-r13 SEQUENCE
(SIZE (1..maxSI-Message)) OF
ETSI TS 136 508 V15.5.0 (2019-07)
All non-MBSFN subframes
are considered as valid
subframes for FDD downlink
or TDD transmissions
All FDD uplink subframes
are considered as valid
subframes
FDD
TDD
n is the same number of
entries, and listed in the
same order, as in
SchedulingInfoList (without
suffix)
0
0
Not present
FREQ
HOPPING
nb4
int4
Int5
ETSI
4 narrowbands
FDD
TDD
3GPP TS 36.508 version 15.5.0 Release 15
}
intervalDLHoppingConfigCommonModeB-r13 CHOICE {
interval-FDD-r13
interval-TDD-r13
}
mpdcch-pdsch-HoppingOffset-r13
}
nonCriticalExtension
182
ETSI TS 136 508 V15.5.0 (2019-07)
int16
int20
2
FDD
TDD
INTEGER (1..16
(maxAvailNarrowBands-r13))
Not present
}
}
}
}
}
}
}
Condition
FDD
TDD
QBASED
UECAT0
eDRX
RF
SIG
FREQ HOPPING
NORMAL
COVERAGE
ENHANCED
COVERAGE
20MHz BW
Band > 64
Explanation
FDD cell environment
TDD cell environment
This condition applies to Quality based cell (re)selection signalling test cases.
This condition applies when UE under test is a UE of Category 0.
This condition applies when UE under test is in enhanced coverage and eDRX is
allowed.
For RF, performance and RRM testing
For Signalling tests
This condition applies when MPDCCH/PDSCH frequency hopping is used
Normal coverage testing
This condition applies for enhanced coverage testing
Used for cells with 20MHz bandwidth
If band > 64 is selected
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
183
4.4.3.3
Common contents of system information blocks
-
SystemInformationBlockType2
ETSI TS 136 508 V15.5.0 (2019-07)
The IE SystemInformationBlockType2 contains radio resource configuration information that is common for all UEs.
Table 4.4.3.3-1: SystemInformationBlockType2
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType2 ::=
SEQUENCE {
ac-BarringInfo SEQUENCE {}
radioResourceConfigCommon SEQUENCE {}
ue-TimersAndConstants SEQUENCE {
t300
t301
t310
n310
t311
n311
}
freqInfo SEQUENCE {
ul-CarrierFreq
ul-Bandwidth
additionalSpectrumEmission
additionalSpectrumEmission
}
mbsfn-SubframeConfigList
mbsfn-SubframeConfigList SEQUENCE
(SIZE (1..maxMBSFN-Allocations)) OF
SEQUENCE {
radioframeAllocationPeriod
radioframeAllocationOffset
subframeAllocation CHOICE{
oneFrame
}
}
timeAlignmentTimerCommon
184
Value/remark
Not present
RadioResourceCo
nfigCommonSIBDEFAULT
Not present
Not Present
1 (NS_01)
Default UL EARFCN applies
32
Condition
See subclause 4.6.3
Typical value in real network
Typical value in real network
Typical value in real network
Typical value in real network
A-MPR doesn’t apply by
default.
See TS 36.101 table 6.2.4-1.
When IE
AdditionalSpectrumEmission v10l0 is used, 32 should be set
to IE
AdditionalSpectrumEmission.
NS value >
32
Not present
MBMS
n4
1
0
FDD
TDD
‘100000’ B
‘000010’ B
FDD
TDD
sf750
Not present
multiBandInfoList
nonCriticalExtension SEQUENCE {
ul-CarrierFreq-v9e0
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
Not present
multiBandInfoList-v10l0
nonCriticalExtension SEQUENCE {}
Comment
ms1000
ms1000
ms1000
n1
ms10000
n1
lateNonCriticalExtension SEQUENCE {
lateNonCriticalExtension SEQUENCE {
freqInfo-v10l0 SEQUENCE {
additionalSpectrumEmission-v10l0
ETSI TS 136 508 V15.5.0 (2019-07)
‘sf750’ is applicable to the
widest range of mobility (up to
about 360km/h).
OCTET STRING
(CONTAINING
SystemInformationBlockType2
-v8h0-IEs)
Not present
OCTET STRING
(CONTAINING
SystemInformationBlockType2
-v10m0-IEs)
Specify the
network signaling
value
corresponding to
the E-UTRA Band
defined in TS
36.101 table
6.2.4-1
Not present
Not present
ETSI
NS value >
32
3GPP TS 36.508 version 15.5.0 Release 15
}
Dummy
185
ETSI TS 136 508 V15.5.0 (2019-07)
Not present
This field is not used in the
specification. If received it
shall be ignored by the UE.
true
Enabled only for CE Mode test
cases requiring frequency
hopping.
}
}
}
}
}
unicastFreqHoppingInd-r13
cIoT-EPS-OptimisationInfo-r13 SEQUENCE
(SIZE (1.. maxPLMN-r11)) OF SEQUENCE {
up-CIoT-EPS-Optimisation-r13
cp-CIoT-EPS-Optimisation-r13
attachWithoutPDN-Connectivity-r13
}
useFullResumeID-r13
plmn-InfoList-r15 SEQUENCE (SIZE
(1..maxPLMN-r11)) OF SEQUENCE {
upperLayerIndication-r15[1]
}
}
Condition
MBMS
FDD
TDD
CEfreqHopp
CIoT-test
NS value > 32
CEfreqHopp
CIoT-test
true
true
false
Not present
1 entry
true
Explanation
MBMS cell environment
FDD cell environment
TDD cell environment
Used when frequency hopping is used in CE test cases
CIoT test environment
When A-MPR applies with Network Signaling value > 32
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
186
ETSI TS 136 508 V15.5.0 (2019-07)
SystemInformationBlockType3
The IE SystemInformationBlockType3 contains cell re-selection information common for intra-frequency, interfrequency and/or inter-RAT cell re-selection (i.e. applicable for more than one type of cell re-selection but not
necessarily all) as well as intra-frequency cell re-selection information other than neighbouring cell related.
Table 4.4.3.3-2: SystemInformationBlockType3
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType3 ::= SEQUENCE {
cellReselectionInfoCommon SEQUENCE {
q-Hyst
speedStateReselectionPars SEQUENCE {}
}
cellReselectionServingFreqInfo SEQUENCE {
s-NonIntraSearch
threshServingLow
cellReselectionPriority
}
intraFreqCellReselectionInfo SEQUENCE {
q-RxLevMin
Value/remark
dB0
Not present
0 (0 dB)
4
-70 (-140 dBm)
p-Max
s-IntraSearch
allowedMeasBandwidth
Not present
Not present
Not present
presenceAntennaPort1
FALSE
TRUE
t-ReselectionEUTRA
t-ReselectionEUTRA-SF
}
lateNonCriticalExtension {
s-IntraSearch-v920 SEQUENCE {}
s-NonIntraSearch-v920 SEQUENCE {}
q-QualMin-r9
threshServingLowQ-r9
cellSelectionInfoCE-r13
t-ReselectionEUTRA-CE-r13
Condition
To reduce
interference
between intrafrequency multiple
cells
Not present
-106 dBm
neighCellConfig
Comment
'01'B (No MBSFN
subframes are present in
all neighbour cells)
0
Typical value in
real network
A middle value in
the range has
been selected.
For RF/RRM test
cases
For signalling test
cases
The downlink
bandwidth of the
serving cell
applies.
At least two cellspecific antenna
ports are used in
all neighbouring
cells.
MBSFN doesn’t
apply by default.
All
neighCells
with port1
Typical value in
real network
Not present
Not present
Not present
Not present
-20 (-20dB)
Not present
3 (3dB)
CellSelectionInfoCE-r13DEFAULT
Not present
0
Not present
}
}
ETSI
QBASED
QBASED
CEmodeA,
CEmodeB
CEmodeA,
CEmodeB
3GPP TS 36.508 version 15.5.0 Release 15
Condition
QBASED
All neighCells with
port1
CEmodeA
CEmodeB
-
187
ETSI TS 136 508 V15.5.0 (2019-07)
Explanation
See the definition below table 4.4.3.2-3.
Used for all neighbouring cells with at least two cell-specific antenna ports
CE mode A test environment
CE mode B test environment
SystemInformationBlockType4
The IE SystemInformationBlockType4 contains neighbouring cell related information relevant only for intra-frequency
cell re-selection. The IE includes cells with specific re-selection parameters as well as blacklisted cells.
Table 4.4.3.3-3: SystemInformationBlockType4
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType4 ::= SEQUENCE {
intraFreqNeighCellList SEQUENCE (SIZE
(1..maxCellIntra)) OF SEQUENCE {}
intraFreqBlackCellList SEQUENCE (SIZE
(1..maxCellBlack)) OF SEQUENCE {}
csg-PhysCellIdRange SEQUENCE {}
csg-PhysCellIdRange SEQUENCE {
start
range
Value/remark
Not present
Not present
Comment
Not required
unless Qoffset
configuration is
tested. When
Qoffset
configuration is
tested, see table
6.3.1.1-1.
Not required
unless Blacklisted
cell list
configuration is
tested. When
Blacklisted cell list
configuration is
tested, see table
6.3.1.1-1.
Not present
Physical Cell ID of the
cell on which this SIB is
transmitted
Not present
Condition
NonCSG
CSG
The UE shall
apply value 1 in
case the field is
absent, in which
case only the
physical cell
identity value
indicated by start
applies.
}
}
Condition
NonCSG
CSG
-
Explanation
SIB4 transmitted on a non-CSG cell
SIB4 transmitted on a CSG cell
SystemInformationBlockType5
The IE SystemInformationBlockType5 contains information relevant only for inter-frequency cell re-selection i.e.
information about other E-UTRA frequencies and inter-frequency neighbouring cells relevant for cell re-selection. The
IE includes cell re-selection parameters common for a frequency as well as cell specific re-selection parameters.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
188
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.3-4: SystemInformationBlockType5
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType5 ::= SEQUENCE {
interFreqCarrierFreqList SEQUENCE (SIZE
(1..maxFreq)) OF SEQUENCE {
dl-CarrierFreq[n]
dl-CarrierFreq[n]
q-RxLevMin[n]
189
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
The same number of
entries as the configured
inter-freq carriers. For
Signalling test cases
except NAS, see table
6.3.1.2-1.
For NAS test cases when
cells are on same PLMN,
see table 6.3.2.3.2-1.
Downlink EARFCN under
test
For Signalling test cases
except NAS, see table
6.3.1.2-1.
For NAS test cases when
cells are on same PLMN,
see table 6.3.2.3.2-1.
65535
-65 (-130 dBm)
n denotes the
index of the entry
-106 dBm
p-Max[n]
t-ReselectionEUTRA[n]
Not present
0
t-ReselectionEUTRA-SF[n]
Not present
threshX-High[n]
2 (4 dB)
threshX-Low[n]
allowedMeasBandwidth[n]
1 (2 dB)
See subclause 4.4.3.4
presenceAntennaPort1[n]
FALSE
TRUE
cellReselectionPriority[n]
4
neighCellConfig[n]
'01'B (No MBSFN
subframes are present in
all neighbour cells)
dB0
q-OffsetFreq[n]
interFreqNeighCellList[n] SEQUENCE (SIZE
(1..maxCellInter)) OF SEQUENCE {}
Not present
ETSI
maxEARFCN
For RF/RRM test
cases
For signalling test
cases
Condition
Band > 64
Typical value in
real network
Not required
unless speeddependent cell reselection is tested.
This value should
be higher than
threshServingLow
of the serving cell
to avoid ping-pong
with lower priority
cells.
Channelbandwidthdependent
parameter
At least two cellspecific antenna
ports are used in
all neighbouring
cells.
The same priority
as the one used
for serving cell in
SIB 3.
MBSFN doesn’t
apply by default.
Qoffset doesn’t
apply by default.
Not required
unless Qoffset
configuration is
tested.
All
neighCells
with port1
3GPP TS 36.508 version 15.5.0 Release 15
interFreqBlackCellList[n] SEQUENCE (SIZE
(1..maxCellBlack)) OF SEQUENCE {}
q-QualMin-r9[n]
threshX-Q-r9[n] SEQUENCE {}
threshX-Q-r9[n] SEQUENCE {
threshX-HighQ-r9
threshX-LowQ-r9
}
}
SystemInformationBlockType5-v8h0-IEs
SEQUENCE {
nonCriticalExtension SEQUENCE {
interFreqCarrierFreqList-v9e0 SEQUENCE
{ (SIZE (1..maxFreq)) OF SEQUENCE {
dl-CarrierFreq-v9e0[n]
190
Not present
ETSI TS 136 508 V15.5.0 (2019-07)
Not required
unless Blacklisted
cell list
configuration is
tested.
Not present
-20 (-20dB)
Not present
QBASED
5 (5dB)
5 (5dB)
Band > 64
Downlink EARFCN under
test
For Signalling test cases
except NAS, see table
6.3.1.2-1.
For NAS test cases when
cells are on same PLMN,
see table 6.3.2.3.2-1
}
}
}
interFreqCarrierFreqList-v1250[n] SEQUENCE {}
interFreqCarrierFreqListExt-r12[n] SEQUENCE {}
interFreqCarrierFreqListExt-v1280[n] SEQUENCE
{}
interFreqCarrierFreqList-v1310[n] SEQUENCE {}
interFreqCarrierFreqListExt-v1310[n] SEQUENCE
{}
}
Condition
QBASED
All neighCells with
port1
Band > 64
QBASED
Not present
Not present
Not present
Not present
Not present
Explanation
See the definition below table 4.4.3.2-3.
Used for all neighbouring cells with at least two cell-specific antenna ports
If band > 64 is selected
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
191
ETSI TS 136 508 V15.5.0 (2019-07)
SystemInformationBlockType6
The IE SystemInformationBlockType6 contains information relevant only for inter-RAT cell re-selection i.e.
information about UTRA frequencies and UTRA neighbouring cells relevant for cell re-selection. The IE includes cell
re-selection parameters common for a frequency.
Table 4.4.3.3-5: SystemInformationBlockType6
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType6 ::= SEQUENCE {
carrierFreqListUTRA-FDD SEQUENCE (SIZE
(1..maxUTRA-FDD-Carrier)) OF SEQUENCE {}
carrierFreqListUTRA-FDD SEQUENCE (SIZE
(1..maxUTRA-FDD-Carrier)) OF SEQUENCE {
192
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Not present
cellReselectionPriority[n]
threshX-High[n]
threshX-Low[n]
q-RxLevMin[n]
The same number of
entries as the configured
UTRA FDD carriers
For Signalling test cases,
see table 6.3.1.3-1
Downlink UARFCN under
test
For Signalling test cases,
see table 6.3.1.3-1
3
2 (4 dB)
1 (2 dB)
-40 (-79 dBm)
p-MaxUTRA[n]
21 (21 dBm)
q-QualMin[n]
-24 (-24 dB)
threshX-Q-r9[n] SEQUENCE {}
threshX-Q-r9[n] SEQUENCE {
Not present
carrierFreq[n]
threshX-HighQ-r9
threshX-LowQ-r9
}
}
carrierFreqListUTRA-TDD SEQUENCE (SIZE
(1..maxUTRA-TDD-Carrier)) OF SEQUENCE {}
carrierFreqListUTRA-TDD SEQUENCE (SIZE
(1..maxUTRA-TDD-Carrier)) OF SEQUENCE {
Condition
UTRA-TDD
n denotes the
index of the entry
UTRA-FDD
The same value
as defined in TS
34.108 [5], table
6.1.1.
The same value
as defined in TS
34.108 [5], table
6.1.1.
The same value
as defined in TS
34.108 [5], table
6.1.1.
QBASED
9 (9dB)
9 (9dB)
Not present
cellReselectionPriority[n]
threshX-High[n]
threshX-Low[n]
q-RxLevMin[n]
The same number of
entries as the configured
UTRA TDD carriers
For Signalling test cases,
see table 6.3.1.3-1
Downlink UARFCN under
test
For Signalling test cases,
see table 6.3.1.3-1
3
2 (4 dB)
1 (2 dB)
-41 (-81 dBm)
p-MaxUTRA[n]
21 (21 dBm)
carrierFreq[n]
Comment
}
t-ReselectionUTRA
0
t-ReselectionUTRA-SF
Not present
Explanation
ETSI
n denotes the
index of the entry
The same value
as defined in TS
34.108 [5], table
6.1.6a
The same value
as defined in TS
34.108 [5], table
6.1.6a
Typical value in
real network
}
Condition
UTRA-FDD
UTRA-TDD
3GPP TS 36.508 version 15.5.0 Release 15
UTRA-FDD
UTRA-TDD
QBASED
-
193
ETSI TS 136 508 V15.5.0 (2019-07)
UTRA FDD cell environment
UTRA TDD cell environment
See the definition below table 4.4.3.2-3.
SystemInformationBlockType7
The IE SystemInformationBlockType7 contains information relevant only for inter-RAT cell re-selection i.e.
information about GERAN frequencies relevant for cell re-selection. The IE includes cell re-selection parameters for
each frequency.
Table 4.4.3.3-6: SystemInformationBlockType7
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType7 ::= SEQUENCE {
t-ReselectionGERAN
t-ReselectionGERAN-SF
carrierFreqsInfoListSEQUENCE (SIZE
(1..maxGNFG)) OF SEQUENCE {
carrierFreqs [n] SEQUENCE {
startingARFCN[n]
bandIndicator[n]
followingARFCNs[n] CHOICE {
explicitListOfARFCNs[n]
}
}
commonInfo[n] SEQUENCE {
cellReselectionPriority[n]
ncc-Permitted[n]
q-RxLevMin[n]
p-MaxGERAN[n]
threshX-High[n]
threshX-Low[n]
}
Value/remark
0
Not present
The same number of
entries as the configured
GERAN carriers
For RRM test cases, see
table 7.2.2.1-1
For Signalling test cases,
see table 6.3.1.4-1
Comment
n denotes the
index of the entry
Set the corresponding
starting ARFCN of the
GERAN cells under test.
For RRM test cases, see
table 7.2.2.1-1
For Signalling test cases,
see table 6.3.1.4-1
Set according to the
band used for GERAN
cells under test
Set the corresponding
ARFCN of GERAN cells
under test
For RRM test cases, see
table 7.2.2.1-1
For Signalling test cases,
see table 6.3.1.4-1
2
‘01000000'B
2
0
2
2
}
}
ETSI
NCC=1 permitted
Condition
3GPP TS 36.508 version 15.5.0 Release 15
194
ETSI TS 136 508 V15.5.0 (2019-07)
- SystemInformationBlockType8
The IE SystemInformationBlockType8 contains information relevant only for inter-RAT cell re-selection i.e.
information about CDMA2000 frequencies and CDMA2000 neighbouring cells relevant for cell re-selection. The IE
includes cell re-selection parameters common for a frequency as well as cell specific re-selection parameters.
Table 4.4.3.3-7: SystemInformationBlockType8
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType8 ::= SEQUENCE {
systemTimeInfo SEQUENCE {
cdma-EUTRA-Synchronisation
cdma-SystemTime CHOICE {
synchronousSystemTime
}
}
searchWindowSize
parametersHRPD SEQUENCE {}
parametersHRPD SEQUENCE {
preRegistrationInfoHRPD SEQUENCE {
preRegistrationAllowed
preRegistrationZoneId
secondaryPreRegistrationZoneIdList
}
cellReselectionParametersHRPD SEQUENCE {
bandClassList SEQUENCE (SIZE (1..maxCDMA
-BandClass)) OF SEQUENCE {
bandClass
cellReselectionPriority
threshX-High
threshX-Low
}
neighCellList SEQUENCE (SIZE (1..16)) OF
SEQUENCE {
bandClass
neighCellsPerFreqList SEQUENCE (SIZE
(1..16)) OF SEQUENCE {
195
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
Condition
TRUE
A valid value as per TS
36.331 and calculated by
the SS
5
Not present
1XRTT
HRPD
FALSE
Not present
Not present
1 entry
Operating band class
under test.
1
30(-30)
32(-32)
ENUMERATED
{bc0, bc1, bc2,
bc3, bc4, bc5,
bc6, bc7, bc8,
bc9, bc10, bc11,
bc12, bc13, bc14,
bc15, bc16, bc17,
spare14, spare13,
spare12, spare11,
spare10, spare9,
spare8, spare7,
spare6, spare5,
spare4, spare3,
spare2, spare1,
...}
INTEGER (0..63)
INTEGER (0..63)
1 entry
Operating band class
under test
The same number of
entries as the configured
CDMA2000 HRPD
frequencies
For Signalling test cases,
see table 6.3.1.5-1
ETSI
ENUMERATED
{bc0, bc1, bc2,
bc3, bc4, bc5,
bc6, bc7, bc8,
bc9, bc10, bc11,
bc12, bc13, bc14,
bc15, bc16, bc17,
spare14, spare13,
spare12, spare11,
spare10, spare9,
spare8, spare7,
spare6, spare5,
spare4, spare3,
spare2, spare1,
...}
n denotes the
index of the entry
3GPP TS 36.508 version 15.5.0 Release 15
arfcn[n]
physCellIdList[n] SEQUENCE (SIZE (1..16))
OF {INTEGER (0..maxPNOffset) }
}
}
t-ReselectionCDMA2000
t-ReselectionCDMA2000-SF
}
}
parameters1XRTT SEQUENCE {}
parameters1XRTT SEQUENCE {
csfb-RegistrationParam1XRTT SEQUENCE {
longCodeState1XRTT
cellReselectionParameters1XRTT SEQUENCE {
bandClassList SEQUENCE (SIZE (1..maxCDMA
-BandClass)) OF SEQUENCE {
bandClass
cellReselectionPriority
threshX-High
threshX-Low
}
neighCellList SEQUENCE (SIZE (1..16)) OF
SEQUENCE {
bandClass
neighCellsPerFreqList SEQUENCE (SIZE
(1..16)) OF SEQUENCE {
196
ETSI TS 136 508 V15.5.0 (2019-07)
ARFCN of the
CDMA2000 HRPD
frequency
For Signalling test cases,
see table 6.3.1.5-1
Physical Cell ID List of
the CDMA2000 HRPD
frequency
For Signalling test cases,
see table 6.3.1.5-1
INTEGER
(0..2047)
0
Not Present
INTEGER (0..7)
INTEGER
(0..maxPNOffset)
Not present
A valid value, calculated
and updated by the SS
HRPD
1XRTT
BIT STRING
(SIZE (42))
OPTIONAL
1 entry
Operating band class
under test
0
30(-30)
32(-32)
ENUMERATED
{bc0, bc1, bc2,
bc3, bc4, bc5,
bc6, bc7, bc8,
bc9, bc10, bc11,
bc12, bc13, bc14,
bc15, bc16, bc17,
spare14, spare13,
spare12, spare11,
spare10, spare9,
spare8, spare7,
spare6, spare5,
spare4, spare3,
spare2, spare1,
...}
INTEGER (0..63)
INTEGER (0..63)
1 entry
Operating band class
under test
The same number of
entries as the configured
CDMA2000 1xRTT
frequencies
For Signalling test cases,
see table 6.3.1.6-1
ETSI
ENUMERATED
{bc0, bc1, bc2,
bc3, bc4, bc5,
bc6, bc7, bc8,
bc9, bc10, bc11,
bc12, bc13, bc14,
bc15, bc16, bc17,
spare14, spare13,
spare12, spare11,
spare10, spare9,
spare8, spare7,
spare6, spare5,
spare4, spare3,
spare2, spare1,
...}
n denotes the
index of the entry
3GPP TS 36.508 version 15.5.0 Release 15
arfcn[n]
physCellIdList[n] SEQUENCE (SIZE (1..16))
OF {INTEGER (0..maxPNOffset) }
}
}
t-ReselectionCDMA2000
t-ReselectionCDMA2000-SF
197
ETSI TS 136 508 V15.5.0 (2019-07)
ARFCN of the
CDMA2000 1xRTT
frequency
For Signalling test cases,
see table 6.3.1.6-1
Physical Cell ID List of
the CDMA2000 1xRTT
frequency
For Signalling test cases,
see table 6.3.1.6-1
INTEGER
(0..2047)
0
Not Present
INTEGER (0..7)
INTEGER
(0..maxPNOffset)
}
}
}
Condition
HRPD
1XRTT
-
Explanation
CDMA2000 HRPD cell environment
CDMA2000 1XRTT cell environment
SystemInformationBlockType9
The IE SystemInformationBlockType9 contains a home eNB name (HNB Name).
Table 4.4.3.3-8: SystemInformationBlockType9
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType9 ::= SEQUENCE {
hnb-Name
}
-
Value/remark
“3gppTest”
SystemInformationBlockType10
The IE SystemInformationBlockType10 contains an ETWS primary notification.
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
198
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.3-9: SystemInformationBlockType10
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType10 ::= SEQUENCE {
messageIdentifier
'0001 0001 0000 0010'B
serialNumber
- Geographical Scope (2 bit)
'0011 0000 0000 0000'B
Octet 1 bit 7 ~ 6
- Message Code (10 bit)
- Emergency User Alert (1 bit)
Octet 1 bit 5 ~ Octet 2 bit
4
Octet 1 bit 5
- Popup (1 bit)
Octet 1 bit 4
Value/remark
- Update Number (4 bit)
Octet 2 bit 3 ~ 0
warningType
- Warning Type Value (7 bit)
'0000 0101 1000 0000'B
Octet 1 bit 7 ~ 1
- Emergency User Alert (1 bit)
Octet 1 bit 0
- Popup (1 bit)
Octet 2 bit 7
- Padding (7 bit)
warningSecurityInfo
}
Octet 2 bit 6 ~ bit 0
Not present
ETSI
Comment
ETWS message
identifier for
earthquake and
tsunami message
[see TS 23.041]
Cell wide;
'11 0000 0000'B
Activate
emergency user
alert;
Activate popup;
For each update,
incremented by
one.
[see TS 23.041]
Earthquake and
Tsunami;
Activate
emergency user
alert;
Activate Popup.
[see TS 23.041]
'000 0000'B
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
199
ETSI TS 136 508 V15.5.0 (2019-07)
SystemInformationBlockType11
The IE SystemInformationBlockType11 contains an ETWS secondary notification.
Table 4.4.3.3-10: SystemInformationBlockType11 (1st Segment)
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType11 ::= SEQUENCE {
messageIdentifier
'0001 0001 0000 0010'B
serialNumber
- Geographical Scope (2 bit)
'0011 0000 0000 0000'B
Octet 1 bit 7 ~ 6
- Message Code (10 bit)
- Emergency User Alert (1 bit)
Octet 1 bit 5 ~ Octet 2 bit
4
Octet 1 bit 5
- Popup (1 bit)
Octet 1 bit 4
- Update Number (4 bit)
Octet 2 bit 3 ~ 0
warningMessageSegmentType
warningMessageSegmentNumber
warningMessageSegment
notLastSegment
0
Octetstring of N
dataCodingScheme
Bitstring (8) ID of the
alphabet/coding and the
applied language [see TS
23.041]
Value/remark
}
ETSI
Comment
ETWS message
identifier for
earthquake and
tsunami message
[see TS 23.041]
Cell wide;
'11 0000 0000'B
Activate
emergency user
alert;
Activate popup;
For each update,
incremented by
one.
[see TS 23.041]
where N ≥ 1 and
less than 1246.
[see TS 23.041]
Condition
3GPP TS 36.508 version 15.5.0 Release 15
200
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.3-11: SystemInformationBlockType11 (2nd Segment)
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType11 ::= SEQUENCE {
messageIdentifier
'0001 0001 0000 0010'B
serialNumber
- Geographical Scope (2 bit)
'0011 0000 0000 0000'B
Octet 1 bit 7 ~ 6
- Message Code (10 bit)
- Emergency User Alert (1 bit)
Octet 1 bit 5 ~ Octet 2 bit
4
Octet 1 bit 5
- Popup (1 bit)
Octet 1 bit 4
- Update Number (4 bit)
Octet 2 bit 3 ~ 0
warningMessageSegmentType
warningMessageSegmentNumber
warningMessageSegment
notLastSegment
1
Octetstring of N
dataCodingScheme
Not present
Value/remark
Comment
Condition
ETWS message
identifier for
earthquake and
tsunami message
[see TS 23.041]
Cell wide;
'11 0000 0000'B
Activate
emergency user
alert;
Activate popup;
For each update,
incremented by
one.
[see TS 23.041]
where N ≥ 1 and
less than 1246.
[see TS 23.041]
}
Table 4.4.3.3-12: SystemInformationBlockType11 (3rd Segment)
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType11 ::= SEQUENCE {
messageIdentifier
'0001 0001 0000 0010'B
serialNumber
- Geographical Scope (2 bit)
'0011 0000 0000 0000'B
Octet 1 bit 7 ~ 6
- Message Code (10 bit)
- Emergency User Alert (1 bit)
Octet 1 bit 5 ~ Octet 2 bit
4
Octet 1 bit 5
- Popup (1 bit)
Octet 1 bit 4
- Update Number (4 bit)
Octet 2 bit 3 ~ 0
warningMessageSegmentType
warningMessageSegmentNumber
warningMessageSegment
lastSegment
2
Octetstring of N
dataCodingScheme
Not present
Value/remark
}
ETSI
Comment
ETWS message
identifier for
earthquake and
tsunami message
[see TS 23.041]
Cell wide;
'11 0000 0000'B
Activate
emergency user
alert;
Activate popup;
For each update,
incremented by
one.
[see TS 23.041]
where N ≥ 1 and
less than 1246.
[see TS 23.041]
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
201
ETSI TS 136 508 V15.5.0 (2019-07)
SystemInformationBlockType12
The IE SystemInformationBlockType12contains an CMAS notification.
Table 4.4.3.3-12a: SystemInformationBlockType12 (1st Segment)
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType11 ::= SEQUENCE {
messageIdentifier-r9
'0001 0001 0001 0010'B
serialNumber-r9
warningMessageSegmentType
warningMessageSegmentNumber
warningMessageSegment
'0011 0000 0000 0000'B
notLastSegment
0
Octetstring of N
dataCodingScheme
-Bitstring (8) ID of the
alphabet/coding and the
applied language [see TS
23.041]
Not present
lateNonCriticalExtension
Value/remark
Comment
Condition
CMAS CBS
Message Identifier
for CMAS
Presidential Level
Alerts (see TS
23.041])
where N ≥ 1 and
less than 1246.
(see TS 23.041)
Provided as
PIXITs [see TS
36.523-3 [20] cl.
9]
}
Table 4.4.3.3-12b: SystemInformationBlockType12 (2nd Segment)
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType11 ::= SEQUENCE {
messageIdentifier-r9
'0001 0001 0001 0010'B
serialNumber-r9
warningMessageSegmentType
warningMessageSegmentNumber
warningMessageSegment
'0011 0000 0000 0000'B
notLastSegment
1
Octetstring of N
dataCodingScheme
lateNonCriticalExtension
Value/remark
Not present
Not present
}
ETSI
Comment
CMAS CBS
Message Identifier
for CMAS
Presidential Level
Alerts (see TS
23.041)
where N ≥ 1 and
less than 1246.
(see TS 23.041)
Condition
3GPP TS 36.508 version 15.5.0 Release 15
202
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.3-12c: SystemInformationBlockType12 (3rd Segment)
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType11 ::= SEQUENCE {
messageIdentifier-r9
'0001 0001 0001 0010'B
serialNumber-r9
warningMessageSegmentType
warningMessageSegmentNumber
warningMessageSegment
'0011 0000 0000 0000'B
lastSegment
2
Octetstring of N
dataCodingScheme
lateNonCriticalExtension
Not present
Not present
Value/remark
Comment
Condition
CMAS CBS
Message Identifier
for CMAS
Presidential Level
Alerts (see TS
23.041)
where N ≥ 1 and
less than 1246.
(see TS 23.041)
}
-
SystemInformationBlockType13
The IE SystemInformationBlockType13 contains the information required to acquire the MBMS control information
associated with one or more MBSFN areas.
Table 4.4.3.3-13: SystemInformationBlockType13
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType13 ::= SEQUENCE {
mbsfn-AreaInfoList-r9 SEQUENCE
(SIZE(1..maxMBSFN-Area)) OF SEQUENCE {
mbsfn-AreaId-r9
non-MBSFNregionLength
notificationIndicator-r9
mcch-Config-r9 SEQUENCE {
mcch-RepetitionPeriod-r9
mcch-Offset-r9
mcch-ModificationPeriod-r9
sf-AllocInfo-r9
signallingMCS-r9
Value/remark
Comment
Condition
0
2
0
rf32
1
0
rf512
‘100000’B
‘000010’B
n2
FDD
TDD
FDD
TDD
}
}
notificationConfig-r9 SEQUENCE {
notificationRepetitionCoeff-r9
notificationOffset-r9
notificationSF-Index-r9
n4
1
0
1
5
Subframe #1
Subframe #9
}
}
Condition
FDD
TDD
-
Explanation
FDD cell environment
TDD cell environment
SystemInformationBlockType14
The IE SystemInformationBlockType14 contains the EAB parameters.
ETSI
FDD
TDD
FDD
TDD
3GPP TS 36.508 version 15.5.0 Release 15
203
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.3-13A: SystemInformationBlockType14
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType14-r11 ::= SEQUENCE
{
eab-Param-r11 CHOICE {
EAB-Config-r11 ::= SEQUENCE {
eab-Category-r11
eab-BarringBitmap-r11
Value/remark
a
'1111111111'B
}
}
lateNonCriticalExtension
Comment
Condition
EAB applies to all
UEs in the PLMN
ENUMERATED
{a, b, c}
All UE classes 0-9
BIT STRING
(SIZE (10))
Not Present
}
-
SystemInformationBlockType15
The IE SystemInformationBlockType15 contains the MBMS Service Area Identities (SAI) of the current and/ or
neighbouring carrier frequencies.
Table 4.4.3.3-14: SystemInformationBlockType15
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType15 ::= SEQUENCE {
mbms-SAI-IntraFreq-r11[1] SEQUENCE (SIZE
(1..maxSAI-MBMS-r11)) OF { INTEGER (0..65535) }
mbms-SAI-InterFreqList-r11
mbms-SAI-InterFreqList-r11[n] SEQUENCE (SIZE
(1..maxFreq)) OF SEQUENCE {
dl-CarrierFreq-r11
mbms-SAI-List-r11[n] SEQUENCE (SIZE
(1..maxSAI-MBMS-r11)) OF { INTEGER (0..65535) }
lateNonCriticalExtension
Value/remark
1
Comment
1 entry
INTEGER
(0..65535)
Not present
The same number of
entries as the configured
inter-freq carriers
providing the MBMS
service in the test case
(including additional
bands, if any)
Downlink EARFCN under
test, see table 6.3.1.2-1.
The same number of
entries as the configured
MBMS SAIs providing the
MBMS service in the test
case for the specific
frequency
Not present
}
Condition
Explanation
ETSI
Condition
n denotes the
index of the entry
MBMS_intra
Freq,
SCPTM_intr
aFreq
MBMS_inter
Freq,
SCPTM_inte
rFreq
n denotes the
index of the entry
INTEGER
(0..65535)
MBMS_intra
Freq,
MBMS_inter
Freq,
SCPTM_intr
aFreq,
SCPTM_inte
rFreq
3GPP TS 36.508 version 15.5.0 Release 15
MBMS_intraFreq
MBMS_interFreq
SCPTM_intraFreq
SCPTM_interFreq
-
204
ETSI TS 136 508 V15.5.0 (2019-07)
SIB15 transmitted for a MBMS intra-band cell environment (MBMS service only provided
for intra-frequency cells).
SIB15 transmitted for a MBMS inter-frequency cell environment (MBMS service provided
on multiple frequencies within a band).
SIB15 transmitted for a SC-PTM intra-band cell environment (SC-PTM service only
provided for intra-frequency cells).
SIB15 transmitted for a SC-PTM inter-frequency cell environment (SC-PTM service
provided on multiple frequencies within a band).
SystemInformationBlockType17
The IE SystemInformationBlockType17 contains information relevant for RAN Assisted WLAN interworking
Table 4.4.3.3-15: SystemInformationBlockType17
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType17-r12 ::= SEQUENCE
{
wlan-OffloadInfoPerPLMN-List-r12 [1] SEQUENCE
(SIZE (1..maxPLMN-r11)) OF {
wlan-OffloadConfigCommon-r12
wlan-Id-List-r12 [1] SEQUENCE (SIZE
(1..maxWLAN-Id-r12)) OF {
wlan-Identifiers SEQUENCE{
ssid-r12
bssid-r12
hessid-r12
}
}
}
lateNonCriticalExtension
Value/remark
Comment
Condition
1 Entry
WLAN-OffloadConfigDEFAULT
1 Entry
Set as per Table 4.4.8-1
OCTET STRING
(SIZE (1..32))
Service Set
Identifier (SSID)
defined in IEEE
802.11-2012
Not present
Not present
Not present
}
-
SystemInformationBlockType18
The IE SystemInformationBlockType18 contains the resource pool information for sidelink direct communication.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
205
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.3-16: SystemInformationBlockType18
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
206
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType18-r12 ::= SEQUENCE {
commConfig-r12 SEQUENCE {
commRxPool-r12 SEQUENCE (SIZE (1..maxSLRxPool-r12)) OF SL-CommResourcePool-r12 {
SL-CommResourcePool-r12[1] SEQUENCE {
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
Condition
3 Rx pools
RxPool 1
A monitoring UE
can receive on the
resources of this
pool when a
transmitting UE
uses the
TxPoolNormal 1
sc-CP-Len-r12
sc-Period-r12
sc-TF-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
data-CP-Len-r12
dataHoppingConfig-r12 SEQUENCE {
hoppingParameter-r12
numSubbands-r12
rb-Offset-r12
}
ue-SelectedResourceConfig-r12 SEQUENCE {
data-TF-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
trpt-Subset-r12
}
rxParametersNCell-r12
txParameters-r12
normal
sf40
13
25
0
24
49
0
11000000
00000000
00000000
00000000
00000000
BW5
BW10
BW5
BW10
small-r12
bs40-r12
normal
0
ns1
0
13
25
0
24
49
0
00000000
00000000
11110000
00000000
00000000
BW5
BW10
BW5
BW10
small-r12
bs40-r12
001
Not present
Not present
}
SL-CommResourcePool-r12[2] SEQUENCE {
RxPool 2
A monitoring UE
can receive on the
resources of this
pool when a
transmitting UE
uses the
TxPoolNormal 2
sc-CP-Len-r12
sc-Period-r12
FDD
normal
sf40
ETSI
FDD
3GPP TS 36.508 version 15.5.0 Release 15
sc-TF-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
data-CP-Len-r12
dataHoppingConfig-r12 SEQUENCE {
hoppingParameter-r12
numSubbands-r12
rb-Offset-r12
}
ue-SelectedResourceConfig-r12 SEQUENCE {
data-TF-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
trpt-Subset-r12
207
13
25
0
24
49
0
00110000
00000000
00000000
00000000
00000000
ETSI TS 136 508 V15.5.0 (2019-07)
BW5
BW10
BW5
BW10
small-r12
bs40-r12
FDD
normal
0
ns1
0
13
25
0
24
49
0
00000000
00000000
00111100
00000000
00000000
BW5
BW10
BW5
BW10
small-r12
bs40-r12
FDD
001
}
rxParametersNCell-r12 SEQUENCE {
tdd-Config-r12 SEQUENCE {}
syncConfigIndex-r12
Not present
1
}
txParameters-r12
Not present
}
SL-CommResourcePool-r12[3] SEQUENCE {
Entry 2 in
discSyncConfigr12 (SLSyncConfigr12[2])
RxPool 3
A monitoring UE
can receive on the
resources of this
pool when a
transmitting UE
uses the
TxPoolExceptiona
l1
sc-CP-Len-r12
sc-Period-r12
sc-TF-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
normal
sf40
13
25
0
24
49
0
ETSI
BW5
BW10
BW5
BW10
small-r12
3GPP TS 36.508 version 15.5.0 Release 15
subframeBitmap-r12
}
data-CP-Len-r12
dataHoppingConfig-r12 SEQUENCE {
hoppingParameter-r12
numSubbands-r12
rb-Offset-r12
}
ue-SelectedResourceConfig-r12 SEQUENCE {
data-TF-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
trpt-Subset-r12
}
rxParametersNCell-r12
txParameters-r12
}
}
commTxPoolNormalCommon-r12 SEQUENCE
(SIZE (1..maxSL-TxPool-r12)) OF SLCommResourcePool-r12 {
SL-CommResourcePool-r12[1] SEQUENCE {
sc-CP-Len-r12
sc-Period-r12
sc-TF-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
data-CP-Len-r12
dataHoppingConfig-r12 SEQUENCE {
hoppingParameter-r12
numSubbands-r12
rb-Offset-r12
}
ue-SelectedResourceConfig-r12 SEQUENCE {
data-TF-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
208
00001100
00000000
00000000
00000000
00000000
ETSI TS 136 508 V15.5.0 (2019-07)
bs40-r12
FDD
normal
0
ns1
0
13
25
0
24
49
0
00000000
00000000
00001111
00000000
00000000
BW5
BW10
BW5
BW10
small-r12
bs40-r12
FDD
001
Not present
Not present
2 Tx pools Normal
TxPool 1
normal
sf40
13
25
0
24
49
0
11000000
00000000
00000000
00000000
00000000
BW5
BW10
BW5
BW10
small-r12
bs40-r12
FDD
normal
0
ns1
0
13
25
0
24
49
0
ETSI
BW5
BW10
BW5
BW10
small-r12
3GPP TS 36.508 version 15.5.0 Release 15
subframeBitmap-r12
}
trpt-Subset-r12
}
rxParametersNCell-r12
txParameters-r12 SEQUENCE {
sc-TxParameters-r12 SEQUENCE {
alpha-r12
p0-r12
}
dataTxParameters-r12 SEQUENCE {
alpha-r12
p0-r12
}
}
}
SL-CommResourcePool-r12[2] SEQUENCE {
sc-CP-Len-r12
sc-Period-r12
sc-TF-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
data-CP-Len-r12
dataHoppingConfig-r12 SEQUENCE {
hoppingParameter-r12
numSubbands-r12
rb-Offset-r12
}
ue-SelectedResourceConfig-r12 SEQUENCE {
data-TF-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
trpt-Subset-r12
}
rxParametersNCell-r12
txParameters-r12 SEQUENCE {
sc-TxParameters-r12 SEQUENCE {
alpha-r12
p0-r12
}
dataTxParameters-r12 SEQUENCE {
alpha-r12
209
00000000
00000000
11110000
00000000
00000000
ETSI TS 136 508 V15.5.0 (2019-07)
bs40-r12
FDD
001
Not present
al0
31
al0
0
TxPool 2
normal
sf40
13
25
0
24
49
0
00110000
00000000
00000000
00000000
00000000
BW5
BW10
BW5
BW10
small-r12
bs40-r12
FDD
normal
0
ns1
0
13
25
0
24
49
0
00000000
00000000
00111100
00000000
00000000
001
Not present
al0
31
al0
ETSI
BW5
BW10
BW5
BW10
small-r12
bs40-r12
FDD
3GPP TS 36.508 version 15.5.0 Release 15
p0-r12
210
ETSI TS 136 508 V15.5.0 (2019-07)
0
}
}
}
}
commTxPoolExceptional-r12 SEQUENCE (SIZE
(1..maxSL-TxPool-r12)) OF SL-CommResourcePoolr12 {
SL-CommResourcePool-r12[1] SEQUENCE {
sc-CP-Len-r12
sc-Period-r12
sc-TF-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
data-CP-Len-r12
dataHoppingConfig-r12 SEQUENCE {
hoppingParameter-r12
numSubbands-r12
rb-Offset-r12
}
ue-SelectedResourceConfig-r12 SEQUENCE {
data-TF-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
trpt-Subset-r12
}
rxParametersNCell-r12
txParameters-r12 SEQUENCE {
sc-TxParameters-r12 SEQUENCE {
alpha-r12
p0-r12
}
dataTxParameters-r12 SEQUENCE {
alpha-r12
p0-r12
}
}
1 Tx pool
Exceptional
TxExceptionalPoo
l1
normal
sf40
13
25
0
24
49
0
00001100
00000000
00000000
00000000
00000000
BW5
BW10
BW5
BW10
small-r12
bs40-r12
FDD
normal
0
ns1
0
13
25
0
24
49
0
00000000
00000000
00001111
00000000
00000000
BW5
BW10
BW5
BW10
small-r12
bs40-r12
001
Not present
al0
31
al0
0
}
}
commSyncConfig-r12 SEQUENCE (SIZE
(1..maxSL-SyncConfig-r12)) OF SL-SyncConfig-r12 {
2 configuration
reception/transmis
sion of
synchronisation
signals
ETSI
FDD
3GPP TS 36.508 version 15.5.0 Release 15
211
SL-SyncConfig-r12[1] SEQUENCE {
ETSI TS 136 508 V15.5.0 (2019-07)
SyncConfig 1
To be used for
transmission
syncCP-Len-r12
syncOffsetIndicator-r12
slssid-r12
txParameters-r12 SEQUENCE {
syncTxParameters-r12 SEQUENCE {
alpha-r12
p0-r12
}
syncTxThreshIC-r12
normal
2
30
7
}
rxParamsNCell-r12
Not present
al0
31
}
SL-SyncConfig-r12[2] SEQUENCE {
-85dBm
The threshold for
starting
transmission of
SLSS
SyncConfig 2
To be used for
reception.
RxPool Pool 2 is
refering to this
SyncConfig 2
syncCP-Len-r12
syncOffsetIndicator-r12
slssid-r12
txParameters-r12
rxParamsNCell-r12 SEQUENCE {
physCellId-r12
discSyncWindow-r12
normal
25
40
Not Present
Set to the physical cell
identity of the PCell
w1
}
}
}
}
lateNonCriticalExtension
}
Note 1:
Note 2:
For convenience the difference between the different pools is only in the relevant setting of the
subframeBitmap.
Note that the resources defined by the first entry in preconfigComm defined in clause 6.8.1.1 (used for
transmission by an out of coverage UE) should not overlap (see TS 36.331 [17], clause 9.3.2) with those of
the pool(s) covering scheduled transmissions by in coverage UEs which are defined here for SIB18.
Condition
BW5
BW10
FDD
-
Not present
Explanation
5 MHz channel bandwidth cell environment
10 MHz channel bandwidth cell environment
FDD cell environment
SystemInformationBlockType19
The IE SystemInformationBlockType19 contains the resource pool information for sidelink direct discovery.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
212
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.3-17: SystemInformationBlockType19
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
213
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType19-r12 ::= SEQUENCE {
discConfig-r12 SEQUENCE {
discRxPool-r12 SEQUENCE SIZE (1..maxSLTxPool-r12) OF SL-DiscResourcePool-r12 {
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
Condition
2 RxPools
For convenience
the difference
between the pools
is only in
subframeBitmap.
RxPool 1
SL-DiscResourcePool-r12[1] SEQUENCE {
A monitoring UE
can receive on the
resources of this
pool when a
transmitting UE
uses the
TxPoolCommon 1
cp-Len-r12
discPeriod-r12
numRetx-r12
numRepetition-r12
tf-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
txParameters-r12
rxParameters-r12
normal
rf128
0
1
SL-TFResourceConfigr12
12
24
0
23
48
160
163
11000000
00000000
00000000
00000000
00000000
11000000
00000000
BW5
BW10
bs40-r12
BW5
BW10
FDD
TDD
FDD
bs16-r12
TDD
small-r12
Not present
Not present
}
SL-DiscResourcePool-r12[2] SEQUENCE {
RxPool 2
A monitoring UE
can receive on the
resources of this
pool when a
transmitting UE
uses the
TxPoolCommon 2
cp-Len-r12
discPeriod-r12
numRetx-r12
numRepetition-r12
tf-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
normal
rf128
0
1
SL-TFResourceConfigr12
12
24
0
23
48
160
ETSI
BW5
BW10
small-r12
BW5
BW10
FDD
3GPP TS 36.508 version 15.5.0 Release 15
subframeBitmap-r12
}
txParameters-r12
rxParameters-r12
214
163
00110000
00000000
00000000
00000000
00000000
00110000
00000000
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
bs42-r12
}
ue-SelectedResourceConfig-r12 SEQUENCE {
poolSelection-r12
txProbability-r12
}
}
rxParameters-r12
}
SL-DiscResourcePool-r12[2] SEQUENCE {
cp-Len-r12
discPeriod-r12
numRetx-r12
numRepetition-r12
tf-ResourceConfig-r12 SEQUENCE {
prb-Num-r12
TDD
FDD
bs16-r12
TDD
2 TxPools
For convenience
the difference
between the pools
is only in
subframeBitmap.
TxPool 1
normal
rf128
0
1
SL-TFResourceConfigr12
12
24
0
23
48
160
163
11000000
00000000
00000000
00000000
00000000
11000000
00000000
}
txParameters-r12 SEQUENCE {
txParametersGeneral-r12 SEQUENCE {
alpha-r12
p0-r12
bs40-r12
Not present
Not present
}
}
discTxPoolCommon-r12 SEQUENCE SIZE
(1..maxSL-TxPool-r12) OF SL-DiscResourcePool-r12
{
SL-DiscResourcePool-r12[1] SEQUENCE {
cp-Len-r12
discPeriod-r12
numRetx-r12
numRepetition-r12
tf-ResourceConfig-r12 SEQUENCE {
ETSI TS 136 508 V15.5.0 (2019-07)
BW5
BW10
bs40-r12
BW5
BW10
FDD
TDD
FDD
bs16-r12
TDD
small-r12
SL-TxParametersr12
al0
31
NULL
p100
P0-SL-r12
random-r12
Not present
TxPool 2
normal
rf128
0
1
SL-TFResourceConfigr12
12
24
ETSI
BW5
BW10
3GPP TS 36.508 version 15.5.0 Release 15
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
215
ETSI TS 136 508 V15.5.0 (2019-07)
0
23
48
160
163
00110000
00000000
00000000
00000000
00000000
00110000
00000000
}
txParameters-r12 SEQUENCE {
txParametersGeneral-r12 SEQUENCE {
alpha-r12
p0-r12
}
ue-SelectedResourceConfig-r12 SEQUENCE {
poolSelection-r12
txProbability-r12
}
}
rxParameters-r12
bs40-r12
BW5
BW10
FDD
TDD
FDD
bs16-r12
TDD
small-r12
SL-TxParametersr12
al0
31
NULL
p100
P0-SL-r12
random-r12
Not Present
}
}
discTxPowerInfo-r12 SEQUENCE (SIZE (maxSLDiscPowerClass-r12)) OF SL-DiscTxPowerInfo-r12 {
SL-DiscTxPowerInfo-r12[1] SEQUENCE {
UE range class
‘short’
discMaxTxPower-r12
}
SL-DiscTxPowerInfo-r12[2] SEQUENCE {
23
discMaxTxPower-r12
}
SL-DiscTxPowerInfo-r12[3] SEQUENCE {
16
discMaxTxPower-r12
UE range class
‘medium’
UE range class
‘long’
10
}
}
discSyncConfig-r12 SEQUENCE (SIZE (1..maxSLSyncConfig-r12)) OF SL-SyncConfig-r12 {
SL-SyncConfig-r12[1] SEQUENCE {
syncCP-Len-r12
syncOffsetIndicator-r12
slssid-r12
txParameters-r12 SEQUENCE {
syncTxParameters-r12 SEQUENCE {
alpha-r12
p0-r12
}
syncTxThreshIC-r12
syncInfoReserved-r12
}
rxParamsNCell-r12 SEQUENCE {}
}
SL-SyncConfig-r12[2] SEQUENCE {
syncCP-Len-r12
syncOffsetIndicator-r12
2 configurations
reception/transmission of
synchronisation signals
SyncConfig 1
To be used for
transmission
normal
35
30
SL-TxParametersr12
al0
31
0
Not Present
Not present
SyncConfig 2
normal
25
ETSI
(-infinity)
SLSS will not be
transmitted
3GPP TS 36.508 version 15.5.0 Release 15
slssid-r12
txParameters-r12 SEQUENCE {
syncTxParameters-r12 SEQUENCE {
alpha-r12
p0-r12
216
ETSI TS 136 508 V15.5.0 (2019-07)
40
SL-TxParametersr12
al0
4
}
syncTxThreshIC-r12
7
syncInfoReserved-r12
}
rxParamsNCell-r12 SEQUENCE {
physCellId-r12
discSyncWindow-r12
-85dBm
The threshold for
starting
transmission of
SLSS
Not Present
Set to the physical cell
identity of the PCell
w1
}
}
}
}
discInterFreqList-r12
lateNonCriticalExtension
...
Not present
}
Condition
FDD
TDD
BW5
BW10
-
Explanation
FDD cell environment
TDD cell environment (TDD config 1)
5 MHz channel bandwidth cell environment
10 MHz channel bandwidth cell environment
SystemInformationBlockType20
The IE SystemInformationBlockType20 contains the information required to acquire the SC-PTM control information.
Table 4.4.3.3-18: SystemInformationBlockType20
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType20-r13 ::= SEQUENCE
{
sc-mcch-RepetionPeriod-r13
sc-mcch-Offset-r13
sc-mcch-FirstSubframe-r13
sc-mcch-duration-r13
sc-mcch-ModificationPeriod-r13
lateNonCriticalExtension
}
-
Value/remark
Comment
Condition
Rf32
1
0
Not present
Rf512
SystemInformationBlockType21
The IE SystemInformationBlockType21 contains the resource pool information for V2X sidelink communication.
Table 4.4.3.3-19: SystemInformationBlockType21
Derivation Path: 36.331 clause 6.3.1
Information Element
SystemInformationBlockType21-r14 ::= SEQUENCE {
sl-V2X-ConfigCommon-r14 SEQUENCE {
Value/remark
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
v2x-CommRxPool-r14
v2x-CommTxPoolNormalCommon-r14
p2x-CommTxPoolNormalCommon-r14
v2x-CommTxPoolExceptional-r14
v2x-SyncConfig-r14
v2x-InterFreqInfoList-r14 SEQUENCE (SIZE
(0..maxFreqV2X-1-r14)) OF SL-InterFreqInfoV2X-r14
{
SL-InterFreqInfoV2X-r14[1]
217
Not present
Not present
Not present
Not present
Not present
1 entry
SL-InterFreqInfoV2X-r14DEFAULT using
condition SIB
}
v2x-ResourceSelectionConfig-r14
zoneConfig-r14 SEQUENCE {}
typeTxSync-r14
Not present
Not present
enb
thresSL-TxPrioritization-r14
anchorCarrierFreqList-r14
offsetDFN-r14
cbr-CommonTxConfigList-r14
Not present
Not present
Not present
Not present
}
lateNonCriticalExtension
ETSI TS 136 508 V15.5.0 (2019-07)
ENUMERATED
{gnss, enb, ue,
spare1}
Not present
}
-
SystemInformationBlockType24
The IE SystemInformationBlockType24 contains information relevant only for inter-RAT cell re-selection i.e.
information about NR frequencies and NR neighbouring cells relevant for cell re-selection. The IE includes cell reselection parameters common for a frequency.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
218
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.3.3-20: SystemInformationBlockType24
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: TS 36.331 [17], clause 6.3.1
Information Element
SystemInformationBlockType24-r15 ::= SEQUENCE {
carrierFreqListNR-r15 SEQUENCE (SIZE
(1..maxFreq)) OF SEQUENCE {
carrierFreq-r15[n]
multiBandInfoList-r15 [n] SEQUENCE (SIZE
(1..maxMultiBandsNR-r15)) OF SEQUENCE {}
multiBandInfoListSUL-r15[n] SEQUENCE (SIZE
(1..maxMultiBandsNR-r15)) OF SEQUENCE {}
measTimingConfig-r15[n] SEQUENCE {
periodicityAndOffset-r15 CHOICE {
sf20
sf160
}
ssb-Duration-r15
}
subcarrierSpacingSSB-r15[n]
ss-RSSI-Measurement-r15[n]
cellReselectionPriority-r15[n]
cellReselectionSubPriority-r15[n]
threshX-High-r15[n]
threshX-Low-r15[n]
threshX-Q-r15[n]
threshX-Q-r15[n] SEQUENCE {
threshX-HighQ-r15
threshX-LowQ-r15
}
q-RxLevMin-r15[n]
219
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
The same number of
entries as the configured
NR carriers
For Signalling test cases,
see Table 6.3.1.8-1.
Downlink NR ARFCN of
SSB under test
n denotes the
index of the entry
Not present
0
0
FR1
FR2
sf2
sf3
FR1
FR2
kHz15
kHz30
kHz120
SCS_15kHz
SCS_30kHz
SCS_120kH
z
Not present
5
Not present
2 (4 dB)
1 (2 dB)
Not present
QBASED
5 (5 dB)
5 (5 dB)
-70 (-140 dBm)
-70 (-140 dBm)
-53 (-106 dBm)
p-MaxNR-r15[n]
23
26
ns-PmaxListNR-r15[n]
q-QualMin-r15[n]
Not present
Not present
-20 (-20dB)
False
Not present
Not present
deriveSSB-IndexFromCell-r15[n]
maxRS-IndexCellQual-r15[n]
threshRS-Index-r15[n]
For signalling test
cases see TS
38.508-1 [67]
subclause 6.2.3.
Otherwise, see TS
38.508-1 [67]
subclause 4.3.1.
Not present
-53 (-106 dBm)
q-RxLevMinSUL-r15[n]
Condition
}
t-ReselectionNR-r15
t-ReselectionNR-SF-r15
0
Not present
lateNonCriticalExtension
Not present
ETSI
For RF/RRM test
cases
For signalling test
cases
For RF/RRM test
cases
For signalling test
cases
SUL
FR1
FR2
FR1_RF_P
C2
QBASED
Not required
unless speeddependent cell reselection is tested.
3GPP TS 36.508 version 15.5.0 Release 15
220
ETSI TS 136 508 V15.5.0 (2019-07)
}
Condition
Explanation
SCS=15kHz for frequency of the cell according to TS 38.508-1 [67]
clause 6.2.3 for signalling test cases and clause 4.3.1 otherwise
SCS=30kHz for frequency of the cell according to TS 38.508-1 [67]
clause 6.2.3 for signalling test cases and clause 4.3.1 otherwise
SCS=120kHz for frequency of the cell according to TS 38.508-1 [67]
clause 6.2.3 for signalling test cases and clause 4.3.1 otherwise
This condition applies to Quality based cell (re)selection signalling test
cases.
FR1 RF testing with Power Class 2
SCS_15kHz
SCS_30kHz
SCS_120kHz
QBASED
FR1_RF_PC2
4.4.3.4
Channel-bandwidth-dependent parameters in system information blocks
The default values of parameters in system information blocks which depend on the channel bandwidth are defined in
table 4.4.3.4-1.
Table 4.4.3.4-1: Channel-bandwidth-dependent parameters
Information
Element
SIB3
periodicity
SIB4
periodicity
SIB5
periodicity
SIB6
periodicity
SIB7
periodicity
SIB8
periodicity
measurement
Bandwidth in
SIB5
SIB9
periodicity
SIB10
periodicity
SIB11
periodicity
SIB12
periodicity
SIB13
periodicity
SIB15
periodicity
SIB17
periodicity
SIB18
periodicity
SIB19
periodicity
SIB20
periodicity
SIB21
periodicity
SIB24
periodicity
Channel bandwidth
5 MHz
10 MHz
32
32
1.4 MHz
64
3 MHz
64
128
128
64
128
128
128
Comment
15 MHz
32
20MHz
32
64
64
64
64
64
64
64
128
64
64
64
64
128
128
64
64
64
64
128
128
64
64
64
64
mbw6
mbw15
mbw25
mbw50
mbw75
mbw100
128
128
64
64
64
64
64
64
32
32
32
32
64
64
32
32
32
32
64
64
32
32
32
32
64
64
32
32
32
32
64
64
32
32
32
32
128
128
64
64
64
64
32
32
-
32
64
64
64
64
32
32
32
32
64
64
32
128
128
64
64
ETSI
32
64
64
3GPP TS 36.508 version 15.5.0 Release 15
4.4.4
221
ETSI TS 136 508 V15.5.0 (2019-07)
Common parameters for simulated UTRA cells
The parameters specified in this subclause apply to all simulated UTRA cells unless otherwise specified.
Default UTRA parameters for simulated cells are specified in table 4.4.4-1 and table 4.4.4-2.
Other parameters are specified in TS 34.108 [5].
Table 4.4.4-1: Default parameters for simulated UTRA cells
cell ID
Cell 5
Cell 7
Cell 8
Cell 9
Cell 37
Cell 38
Cell 39
Primary scrambling
code for FDD
100
150
200
250
300
350
400
Cell parameters ID
for TDD
0
4
8
12
16
20
24
Table 4.4.4-2: Default NAS parameters for simulated UTRA cells
PLMN
Cell 5
Cell 7
Cell 8
Cell 9
Cell 37
Cell 38
Cell 39
Note 1:
Location Area
Routing Area
TMSI
P-TMSI signature
Identification
Identification
MCC
MNC
LA#
LAC
RA#
RAC
(Note 1)
LAI-1
1
RAI-1
1
Arbitrarily selected Arbitrarily selected
according to
according to
(Note 1)
LAI-1
1
RAI-1
1
TS 23.003
TS 23.003
(Note 1)
LAI-1
1
RAI-1
1
subclause 2.4 [2]
subclause 2.7 [2]
(Note 1)
LAI-1
1
RAI-1
1
(Note 1)
LAI-1
1
RAI-1
1
(Note 1)
LAI-1
1
RAI-1
1
(Note 1)
LAI-1
1
RAI-1
1
Set to the same Mobile Country Code and Mobile Network Code stored in EFIMSI on the test USIM card
(subclause 4.9.3).
4.4.4.1
Common contents of system information blocks for UTRA cells
-
System Information Block type 19
The system information block type 19 contains Inter-RAT frequency and priority information to be used in the cell.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
222
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.4.1-1: System Information Block type 19
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 25.331 clause 11.3
Information Element
SysInfoType19 ::= SEQUENCE {
utra-PriorityInfoList SEQUENCE {
utra-ServingCell SEQUENCE {
priority
s-PrioritySearch1
s-PrioritySearch2
threshServingLow
}
utran-FDD-FrequencyList SEQUENCE
(SIZE(1..maxNumFDDFreqs)) OF SEQUENCE {}
utran-TDD-FrequencyList SEQUENCE
(SIZE(1..maxNumTDDFreqs)) OF SEQUENCE {}
gsm-PriorityInfoList SEQUENCE (SIZE
(1..maxNumGSMCellGroup)) OF SEQUENCE {}
eutra-FrequencyAndPriorityInfoList SEQUENCE
(SIZE (1..maxNumEUTRAFreqs)) OF SEQUENCE {
earfcn[n]
measurementBandwidth[n]
priority[n]
qRxLevMinEUTRA[n]
223
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
3
0 (0dB)
Not present
0 (0dB)
}
eutra-FrequencyAndPriorityInfoList
v920NonCriticalExtensions SEQUENCE {
va80NonCriticalExtensions SEQUENCE {
vb30NonCriticalExtensions SEQUENCE {
vb50NonCriticalExtensions SEQUENCE {
sysInfoType19-vb50ext SEQUENCE {
numberOfApplicableEARFCN
eutraFrequencyAndPriorityInfoExtensionList SEQUENCE
(SIZE (1..maxNumEUTRAFreqs)) OF SEQUENCE {
earfcn
measurementBandwidth
priority
qRxLevMinEUTRA
default value is 0
Not present
Not present
The same number of
entries as the configured
eutra carriers
For Signalling test cases,
see table 6.3.1.7-1
Downlink EARFCN under
test
For Signalling test cases,
see table 6.3.1.7-1
Set according to EUTRA
band ChBw in Table 5.61 of TS36.104.
4
-53 (-106 dBm)
n denotes the
index of the entry
For signalling test
cases
For RF/RRM test
cases
2 (4 dB)
1 (2 dB)
Not present
TRUE
Not present
Band > 64
QBASED
Band > 64
0
Downlink EARFCN under
test
For Signalling test cases,
see table 6.3.1.7-1
Set according to EUTRA
band ChBw in Table 5.61 of TS 36.104.
4
-53 (-106 dBm)
-70 (-140 dBm)
threshXhigh
threshXlow
qqualMinEUTRA
threshXhigh2
threshXlow2
eutra-blackListedCellList
Condition
Not present
-70 (-140 dBm)
threshXhigh[n]
threshXlow[n]
eutra-blackListedCellList[n]
eutraDetection[n]
Comment
2 (4 dB)
1 (2 dB)
Not present
Not present
Not present
Not present
ETSI
For signalling test
cases
For RF/RRM test
cases
3GPP TS 36.508 version 15.5.0 Release 15
eutraDetection
224
ETSI TS 136 508 V15.5.0 (2019-07)
TRUE
}
}
vb80NonCriticalExtensions SEQUENCE {}
}
}
}
sysInfoType19-v920ext SEQUENCE {
utra-PriorityInfoList-v920ext SEQUENCE {
threshServingLow2
}
eutra-FrequencyAndPriorityInfoList-v920ext
(SIZE (1..maxNumEUTRAFreqs)) OF SEQUENCE {
qQualMinEUTRA[n]
threshXhigh2[n]
threshXlow2[n]
}
v920NonCriticalExtensions SEQUENCE {
va80NonCriticalExtensions SEQUENCE {
vb30NonCriticalExtensions SEQUENCE {
vb50NonCriticalExtensions SEQUENCE {
sysInfoType19-vb50ext SEQUENCE {
numberOfApplicableEARFCN
eutraFrequencyAndPriorityInfoExtensionList SEQUENCE
(SIZE (1..maxNumEUTRAFreqs)) OF SEQUENCE {
earfcn
measurementBandwidth
priority
qRxLevMinEUTRA
7 (7dB)
-20 (-20dB)
5 (5dB)
5 (5dB)
Band > 64
0
Downlink EARFCN under
test
For Signalling test cases,
see table 6.3.1.7-1
Set according to EUTRA
band ChBw in Table 5.61 of TS 36.104.
4
-53 (-106 dBm)
-70 (-140 dBm)
threshXhigh
threshXlow
qqualMinEUTRA
threshXhigh2
threshXlow2
eutra-blackListedCellList
eutraDetection
}
2 (4 dB)
1 (2 dB)
Not present
Not present
Not present
Not present
TRUE
}
vb80NonCriticalExtensions SEQUENCE {}
}
}
}
}
}
nonCriticalExtensions SEQUENCE {}
Not present
}
}
Condition
QBASED
Band > 64
default value is 0
Explanation
See the definition below table 4.4.3.2-3.
If band > 64 is selected
ETSI
For signalling test
cases
For RF/RRM test
cases
3GPP TS 36.508 version 15.5.0 Release 15
225
ETSI TS 136 508 V15.5.0 (2019-07)
4.4.4.2 UTRA SIB scheduling for inter EUTRA - UTRA test
Table 4.4.4.2-1: UTRA SIB schedule
Block
MIB
Type
SIB_REP
8
SEG_
1
COUNT
SB1
SIB1
SIB2
SIB3
16
1
64
1
64
1
64
1
SIB4 SIB5/SIB5bis SIB6
64
1
64
4
64
4
SIB7
SIB11
SIB12
SIB18
SIB19
16
1
64
3
64
1
64
1
64
2
Table 4.4.4.2-2: UTRA SIB-repeat period
Frame No / SIB_POS
Block Type
0
MIB
2
SB1
4
SIB7
6
SIB6
8
MIB
10
SIB6
12
SIB6
14
SIB6
Frame No / SIB_POS
Block Type
16
MIB
18
SB1
20
SIB7/SIB3
22
SIB1/SIB2
24
MIB
26
SIB12
28
SIB19
30
SIB19
Frame No / SIB_POS
Block Type
32
MIB
34
SB1
36
SIB7/SIB18
38
SIB5/
SIB5bis
40
MIB
42
SIB5/
SIB5bis
44
SIB5/
SIB5bis
46
SIB5/
SIB5bis
Frame No / SIB_POS
Block Type
48
MIB
50
SB1
52
SIB7/SIB4
54
56
MIB
58
SIB11
60
SIB11
62
SIB11
4.4.4.3
-
UTRA SIB scheduling for inter EUTRA – UTRA - GERAN test
Table 4.4.4.3-1: UTRA SIB schedule
Block
Type
SIB Rep
Max. No of
seg.
MIB
SB1
SIB1
SIB2
SIB3
SIB4
8
16
128
128
64
64
SIB5/
SIB5bis
128
1
2
1
1
1
1
4
ETSI
SIB7
SIB11
SIB16
SIB18
SIB19
32
128
128
128
128
1
3
8
1
3
3GPP TS 36.508 version 15.5.0 Release 15
226
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.4.3-2: UTRA SIB-repeat period
Frame No /
SIB_POS
Block Type
Frame No /
SIB_POS
Block Type
Frame No /
SIB_POS
Block Type
Frame No /
SIB_POS
Block Type
Frame No /
SIB_POS
Block Type
Frame No /
SIB_POS
Block Type
Frame No /
SIB_POS
Block Type
Frame No /
SIB_POS
Block Type
4.4.5
0
2
4
6
8
10
12
14
MIB
SB1
SB1
-
MIB
SIB1
SIB18
SIB2
16
18
20
22
24
26
28
30
MIB
SB1
SB1
SIB7
MIB
SIB3
-
SIB4
32
34
36
38
40
42
44
46
MIB
SB1
SB1
SIB5/
SIB5bis
MIB
SIB5/
SIB5bis
SIB5/
SIB5bis
SIB5/
SIB5bis
48
50
52
54
56
58
60
62
MIB
SB1
SB1
SIB7
MIB
SIB11
SIB11
SIB11
64
66
68
70
72
74
76
78
MIB
SB1
SB1
SIB16
MIB
SIB16
SIB16
SIB16
80
82
84
86
88
90
92
94
MIB
SB1
SB1
SIB7
MIB
SIB3
SIB19
SIB4
96
98
100
102
104
106
108
110
MIB
SB1
SB1
SIB16
MIB
SIB16
SIB16
SIB16
112
114
116
118
120
122
124
126
MIB
SB1
SB1
SIB7
MIB
SIB19
SIB19
-
Common parameters for simulated GERAN cells
The parameters specified in this subclause apply to all simulated GERAN cells unless otherwise specified.
See TS 51.010 [25].
The contents of SYSTEM INFORMATION TYPE 2 Quarter message specified below are identical for all GERAN
cells.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
227
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.5-1: System Information 2 Quater
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
228
Derivation Path: 44.018 Table 10.5.2.33b.1
Information Element
System information 2Quater
L2 pseudo length
PROTOCOL DISCRIMINATOR
SKIP INDICATOR
MESSAGE TYPE
SI 2QUATER REST OCTETS
BA Indicator
3G BA Indicator
MP Change Mark
SI2Q Index
SI2Q Count
Measurement_Parameters Description
GPRS_Real Time Difference Description
GPRS_BSIC Description
GPRS_REPORT PRIORITY Description
GPRS_MEASUREMENT_Parameters Description
NC Measurement Parameters
extension length
3G Neighbour Cell Description
3G Measurement Parameters Description
GPRS_3G_MEASUREMENT Parameters
Description
Additions in release 5
3G Additional Measurement Parameters
Description
3G ADDITIONAL MEASUREMENT Parameters
Description 2
Additions in release 6
3G_CCN_ACTIVE
Additions in release 7
700_REPORTING_OFFSET
810_REPORTING_OFFSET
Additions in release 8
Priority and E-UTRAN Parameters Description
Serving Cell Priority Parameters Description
GERAN_PRIORITY
THRESH_Priority_Search
THRESH_GSM_low
H_PRIO
T_Reselection
3G Priority Parameters Description
E-UTRAN Parameters Description
E-UTRAN_CCN_ACTIVE
E-UTRAN_Start
E-UTRAN_Stop
E-UTRAN Measurement Parameters Description
GPRS E-UTRAN Measurement Parameters
Description
Repeated E-UTRAN Neighbour Cells {
EARFCN
EARFCN
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
1
‘0110’B
Comment
Condit
ion
RR management
Protocol
‘0000’B
‘00000111’B
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
H
0
Not Present
0
Not Present
H
0
H
0
0
H
1
1
Not Present
Not Present
2
15 (always)
0
0
0
0
1
0
1
1
0
0
1
Same as cell 1
65535
ETSI
Present
Present
Note: Values as
defined from TS
45.008, section 10.4
Table 3
Not Present
Present
CCN not supported
Not Present
Not Present
Present
This field specifies the
E-UTRA Absolute
Radio Frequency
Channel Number as
defined in
3GPP TS 36.104.
Band >
64
3GPP TS 36.508 version 15.5.0 Release 15
Measurement Bandwidth
229
ETSI TS 136 508 V15.5.0 (2019-07)
E-UTRAN_PRIORITY
Set according to EUTRA
band under test
‘100’B
THRESH_E-UTRAN_high
THRESH_E-UTRAN_low
E-UTRAN_QRXLEVMIN
‘00010’B
‘00010’B
17 (-106 dBm)
0 (-140 dBm)
} ** 0
Repeated E-UTRAN Not Allowed Cells
Repeated E-UTRAN PCID to TA mapping
3G CSG Description
E-UTRAN CSG Description
Additions in release 9
Additions in release 9
0
0
0
0
L
H
Enhanced Cell Reselection Parameters
CSG Cells Reporting Description
Additions in release 10
INIT_PWR_RED
NC2_CSG_PCCN_permitted
Additions in release 11
Extended EARFCNs Description
Repeated EARFCN_extended {
EARFCN_extended
0
0
H
0
0
H
1
1
Same as cell 1
Band >
64
} ** 0
Extended EARFCNs Description for CSG Cells
spare padding
Condition
Band > 64
4.4.6
Same as cell 1 as
defined in
3GPP TS 36.104.
Actual value =4 dB
Actual value =4 dB
For signalling test
cases
For RF/RRM test
cases
End of Repeated EUTRAN Neighbour
cells structure.
Note: When this
message is used in
Tics where more than
one E-UTRA cells are
active, this structure
needs to be specified
for each cell.
EARFCN and
EUTRAN_PRIORITY
will then need to be
configured to the
corresponding
EUTRAN cell
Not Present
Not Present
Present
This field specifies the
E-UTRA Absolute
Radio Frequency
Channel Number as
defined in
3GPP TS 36.104.
End of Repeated
EARFCN_extended
0
spare padding
Explanation
If band > 64 is selected
Common parameters for simulated CDMA2000 cells
The parameters specified in this subclause apply to all simulated HRPD or 1xRTT cells unless otherwise specified.
See C.S0038-B [36] for HRPD cells and C.S0043-A [37] for 1xRTT cells.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.4.7
230
ETSI TS 136 508 V15.5.0 (2019-07)
Default parameters specific for simulated cells
Default parameters specific for simulated cells are specified in this subclause.
4.4.7.1
-
Common contents of HRPD Overhead messages
QuickConfig
The QuickConfig message is used to indicate a change in the overhead messages’ contents and to provide frequently
changing information.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
231
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.7.1-1: QuickConfig
Derivation Path: C.S0024-B clause 7.11.6.2.1
Information Element
MessageID
ColorCode
SectorID24
SectorSignature
AccessSignature
Redirect
RPCCount63To0
ForwardTrafficValid63To0
RPCCount127To64Included
RPCCount127To64
ForwardTrafficValid127To64
RPCCount130To383Included
RPCCount130To383
ForwardTrafficValid130To383
Reserved
-
Value/remark
0x0
See table 4.4.2-3
Least significant
24 bits of Sector
ID given in table
4.4.2-3
A valid value and
same as used for
SectorParameters
A valid value and
same as used for
AccessParameter
s
0X0
A valid value
corresponding to
the value of
px_MACIndex
A valid value
corresponding to
the value of
px_MACIndex
A valid value
corresponding to
the value of
px_MACIndex
A valid value
corresponding to
the value of
px_MACIndex
A valid value
corresponding to
the value of
px_MACIndex
Not Present or a
valid value
corresponding to
the value of
px_MACIndex
Not Present or a
valid value
corresponding to
the value of
px_MACIndex
Not Present or a
valid value
corresponding to
the value of
px_MACIndex
0X0
Comment
0-255;
0 – 255
24 bits
16 bits
16 bits
0-1
0-63
0-1; RPCCount63To0
occurrences
0 or 1 bits
0 or 6 bits
0 or 1 bits;RPCCount127To64
occurrences
0 or 1 bits
0 or 8 bits
0 or 1 bits
0 – 7 bits as needed all set to
zero
SectorParameters
The SectorParameters message is used to convey sector specific information to the access terminals.
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
232
Table 4.4.7.1-2: SectorParameters
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: C.S0024-B clause 7.11.6.2.2
Information Element
MessageID
CountryCode
SectorID
SubnetMask
SectorSignature
Latitude
Longitude
RouteUpdateRadiusOverhead
LeapSeconds
LocalTimeOffset
ReverseLinkSilenceDuration
ReverseLinkSilencePeriod
ChannelCount
Channel
SystemType
BandClass
ChannelNumber
NeighborCount
233
Value/remark
0x01
See table 4.4.2-3
See table 4.4.2-3
0x40
Any valid value
Any valid value
Any valid value
0x0
'A valid value,
calculated and
updated by the
SS'
Any valid value
0x1 or 0x0
0x1 or 0x0
0x1 or 0x0
0x00
Set according to
PIXIT parameter
Set according to
PIXIT parameter
0x0
NeighborPilotPN
16
Not Present
NeighborChannelIncluded
Pilots PN's of
configured cells
[FFS]
0x0
ETSI TS 136 508 V15.5.0 (2019-07)
Comment
0-255
0 – 999;Depends on test case
128 bit value
8 bits
16 bits
22 bits
23 bits
11 bits
8 bits
11 bits
2 bits
2 bits
5 bits
24 bits; ChannelCount
occurrences;
Sub-clause 13.1 in 3GPP2
C.S0024-B v3.0
8 bits
5 bits; Depends on test case
11 bits; Depends on
BandClass
5 bits
1 bit; NeighbourCount
occurrences
Not Present
NeighborChannel
Not Present
NeighborSearchWindowSizeIncluded
NeighborSearchWindowSize
0x0
Not Present
NeighborSearchWindowOffsetIncluded
NeighborSearchWindowOffset
0x0
Not Present
ExtendedChannelIncluded
0x0 or Not
Present
ExtendedChannelCount
ExtendedChannel
Not Present
Not Present
AccessHashingChannelMaskIncluded
0x0 or Not
Present
ETSI
Condition
No_NeighPN
Inc
NeighPNInc
No_NeighPN
Inc
NeighPNInc
NeighPNInc
No_NeighPN
Inc
0 or 24 bits; NeighbourCount
occurrences
1 bit
0 or 4 bits; NeighbourCount
occurrences
1 bit
0 or 3 bits; NeighbourCount
occurrences
0 or 1 bits;
The number of cdma2000 high
rate packet data extended
channels available to the
access terminal on this sector;
Note 1;
0 or 5 bits
24 bits; 0 or
ExtendedChannelCount
occurrences
0 or 1 bits;
AccessHashingChannelMaskL
ength occurrences of this field
and
AccessHashingChannelMask
if set as
AccessHashingChannelMask;
Note 1;
3GPP TS 36.508 version 15.5.0 Release 15
ETSI TS 136 508 V15.5.0 (2019-07)
AccessHashingMaskLength
Not Present
AccessHashingChannelMaskSameAsPrevious
Not Present
AccessHashingChannelMask
Not Present
RouteUpdateTriggerCodeIncluded
0x0 or Not
Present
Not Present
Not Present
0x0 or Not
Present
0x0 or Not
Present
Not Present
0x0 or Not
Present
Not Present
Not Present
0x0 or Not
Present
Not Present
Not Present
0x0 or Not
Present
Not Present
Not Present
0X0
RouteUpdateTriggerCode
RouteUpdateTriggerMaxAge
PriorSessionGAUP
FPDCHSupportedInclude
FPDCHSupported
SecondaryColorCodeIncluded
SecondaryColorCodeCount
SecondaryColorCode
PilotGroupIDLoopIncluded
PilotGroupIDIncluded
PilotGroupID
IsSectorMultiCarrierCapable
ReverseBandClass
ReverseChannelNumber
Reserved
Note 1:
0 or 4 bits;
0<=AccessHashingChannelMa
skLength<=(ChannelCount +
ExtendedChannelCount),
1 bit;
AccessHashingChannelMaskL
ength occurrences of this field
and
AccessHashingChannelMask
if set as
AccessHashingChannelMask
0 or
AccessHashingMaskLength+1
0 or 1 bits; Note 1;
0 or 12 bits
0 or 4 bits
0 or 1 bits; Note 1;
0 or 1 bits; Note 1;
0 or 1 bits
0 or 1 bits; Note 1;
0 or 3 bits
8 bits
0 or 1 bits; Note 1;
0 or 1 bits
0 or 3 bits
0 or 1 bits; Note 1;
0 or 5 bits
0 or 11 bits
0 – 7 bits as needed all set to
zero
As no Non reserved fields following this are included, it can be Not Present; If not present, AT assumes as
0x0.
Condition
No_NeighPNInc
NeighPNInc
-
234
Explanation
No neighbour Pilot PN included
Neighbor Pilot PN's included
AccessParameters
The AccessParameters message is used to convey Access Channel information to the access terminals.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
235
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.4.7.1-3: AccessParameters
Derivation Path: C.S0024-B clause 9.4.6.2.6
Information Element
MessageID
Access Cycle Duration
Access Signature
OpenLoopAdjust
Value/remark
0x1
16 slots or 64
slots
Any valid value
Set according to
PIXIT parameter
for default open
loop adjust
0x0(0 dB)
0x5
0x8(4 dB)
0x2
0x2 or 0x4
0x0 or 0x1
ProbeInitialAdjust
ProbeNumStep
PowerStep
PreambleLength
CapsuleLengthMax
APersistence
Comment
0-255
16,12,64,128 slots
Condition
16 bits
Note1.
8bits(-84 – 115 dB); Actual
value is -1 times
5 bits(-16 – 15 db)
4bits(1 – 15)
4 bits(0 – 7.5 dB)
3bits(1 – 7)
4 bits
6 bits; 'NACMPAPersist = 4'
occurrences
APersistence
0x0 or 0x1
6 bits
APersistence
0x0 or 0x1
6 bits
APersistence
0x0 or 0x1
6 bits
Reserved
0X0
0 – 7 bits as needed all set to
zero
Note 1: The value specified is the value to be used when the AccessParameters is being sent first time. At every
change of content of AccessParameters message it is incremented by 1.
-
Sync
The access network broadcasts the Sync message to convey basic network and timing information
Table 4.4.7.1-4: Sync
Derivation Path: C.S0024-B clause 7.3.6.2.1
Information Element
MessageID
MaximumRevision
Value/remark
0x0
0x1
MinimumRevision
0x1
Pilot PN Offset
CDMA System Time
See table 4.4.2-3
A valid value,
calculated and
updated by the SS
4.4.7.2
4.4.7.2.1
Comment
0-255
8 bits ; Clause 1.15 of 3GPP2
C.S0024-B v3.0
8 bits; Clause 1.15 of 3GPP2
C.S0024-B v3.0
0 – 511
37 bits
Condition
Common contents of 1XRTT Overhead messages
Configuration sequence number
In general, a base station maintains a configuration sequence number CONFIG_SEQ for configuration messages
transmitted on the Paging channel and increments by 1 modulo 64 whenever any of the following messages being
transmitted are modified:
System Parameters Message
Neighbor List Message (Band Class 0 only)
CDMA Channel List Message
Extended System Parameters Message
Extended Neighbor List Message (band classes other than Band Class 0).
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
236
ETSI TS 136 508 V15.5.0 (2019-07)
For simplicity resaons the System Simulator may use any value for this configuration sequence number CONFIG_SEQ.
4.4.7.2.2
-
Over Head messages
CDMA Channel List Message
Table 4.4.7.2.2-1: CDMA Channel List Message
Derivation Path: C.S0005 clause 3.7.2.3.2.4
Information Element
PILOT_PN
CONFIG_MSG_SEQ
CDMA_FREQ
Value/remark
See table 4.4.2-4
Set to '
CONFIG_SEQ' of
base station as
per clause
4.4.7.2.1
Set according to
PIXIT parameter
or as per clause
4.3.1.4
ETSI
Comment
9 bits;
6 bits;
11 bits
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
237
ETSI TS 136 508 V15.5.0 (2019-07)
System Parameters Message
Table 4.4.7.2.2-2: System Parameters Message
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: C.S0005 clause 3.7.2.3.2.1
Information Element
PILOT_PN
CONFIG_MSG_SEQ
238
SID
NID
REG_ZONE
TOTAL_ZONES
ZONE_TIMER
MULT_SIDS
Value/remark
See table 4.4.2-4
Set to '
CONFIG_SEQ' of
base station as
per clause
4.4.7.2.1
See table 4.4.2-4
See table 4.4.2-4
See table 4.4.2-4
1
0 or 1
0 or 1
MULT_NIDS
0 or 1
BASE_ID
BASE_CLASS
See table 4.4.2-4
1
ETSI TS 136 508 V15.5.0 (2019-07)
Comment
15 bits
16 bits
12 bits
3 bits
3 bits; 1 or 2 minutes
1 bits; Mobile shall not or shall
store SID_NID_List containing
different SID's
1 bits; Mobile shall not or shall
store SID_NID_List containing
different NID's
16 bits
4 bits
0
PAGE_CHAN
1
MAX_SLOT_CYCLE_INDEX
1 or 0
HOME_REG
1
FOR_SID_REG
1
FOR_NID_REG
1
POWER_UP_REG
1
POWER_DOWN_REG
PARAMETER_REG
Set according to
PIXIT parameter
0 or 1
REG_PRD
0
BASE_LAT
BASE_LONG
Any valid value
Any valid value
REG_DIST
0
SRCH_WIN_A
8
SRCH_WIN_N
8
SRCH_WIN_R
8
NGHBR_MAX_AGE
0
PWR_REP_THRESH
PWR_REP_FRAMES
PWR_THRESH_ENABLE
PWR_PERIOD_ENABLE
0, 1 or 5
0, 4 or 7
0
0
ETSI
Condition
9 bits
6 bits
3 bits; Number of Paging
Channels
3 bits; Maximum Slot Cycle
index
1 bits; Home registration
enabled
1 bits; SID roamer registration
enabled
1 bits; NID roamer registration
enabled
1 bits; power-up registration
enabled
1 bits; power-down registration
enabled as per PIXIT
1 bits; parameter change
registration disabled or
enabled
7 bits; registration period; No
timer Based Registration
22 bits; Base Station Latitude
23 bits; Base Station
Longitude
11 bits;
Distance based registration
disabled
4 bits; Search Window size for
Active Set; 60 PN Chips
4 bits; Search Window Size for
the neighbor set; 60 PN Chips
4 bits; Search window size for
the remaining set; 60 PN
Chips
4 bits; Minimum Neighbour set
age
5 bits; Power control reporting
threshold
4 bits; power control reporting
frame count; 5 or 28 frames
1 bits; threshold report mode
disabled
1 bits; periodic report mode
disabled
BandClass1
_4
Not
BandClass1
_4
3GPP TS 36.508 version 15.5.0 Release 15
PWR_REP_DELAY
RESCAN
239
ETSI TS 136 508 V15.5.0 (2019-07)
0 or 14
0
T_ADD
28 (-14 dB Ec/Io)
T_DROP
32
T_COMP
T_TDROP
EXT_SYS_PARAMETER
EXT_NGHBR_LST
5
3
1
1
5 bits; 0 or 56 frames
1 bit; re-initialize and reacquire the system
6bits; Pilot detection threshold
(-14 dB Ec/Io)
6 bits; Pilot drop threshold (-16
dB Ec/Io)
4; Active set versus candidate
set comparison threshold (2.5
dB)
4 bits; Drop timer value (4 sec)
1 bit; Extended System
Parameters message present
1 bit; Extended neighbor list
not present
0
GEN_NGHBR_LST
0
GLOBAL_REDIRECT
0
PRI_NGHBR_LST
0
USER_ZONE_ID
0
EXT_GLOBAL_REDIRECT
0
EXT_CHAN_LST
0
Condition
BandClass1_4
BandClass1_3_4
1 bit; General neighbor list not
sent
1 bit; Global service redirection
message not transmitted
1 bit; Private neighbor list
message not transmitted
1 bit; User zone Identification
not transmitted
1 bit; Extended global
redirection not transmitted
1 bit; Extended channel list not
sent
Explanation
If Band Class is 1 or 4
If Band Class is 1 or 3 or 4
ETSI
BandClass1
_3_4
Not
BandClass1
_3_4
3GPP TS 36.508 version 15.5.0 Release 15
-
240
ETSI TS 136 508 V15.5.0 (2019-07)
Access Parameters Message
Table 4.4.7.2.2-3: Access Parameters message
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: C.S0005 clause 3.7.2.3.2.2
Information Element
PILOT_PN
ACC_MSG_SEQ
241
Value/remark
See table 4.4.2-4
0,1,2..63
ACC_CHAN
0
NOM_PWR
INIT_PWR
PWR_STEP
NUM_STEP
0
0
1 or 3
MAX_CAP_SZ
Any valid value
2 or 7
PAM_SZ
Any valid value
PSIST(0-9)
0
PSIST(10)
0
PSIST(11)
0
PSIST(12)
0
PSIST(13)
0
PSIST(14)
0
PSIST(15)
0
MSG_PSIST
0
REG_PSIST
0
PROBE_PN_RAN
4 or 0
ACC_TMO
3, 4 or 5
PROBE_BKOFF
1 or 0
BKOFF
1 or 0
MAX_REQ_SEQ
Any valid value
MAX_RSP_SEQ
Any valid value
AUTH
0
RAND
NOM_PWR_EXT
Not present
0
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
Comment
9 bits;
6 bits; Access Message
Sequence; 0 is used in initial
transmission and incremented
by 1 modulo 64 every time
Access Parameters message
is modified;
for simplicity reasons any
value may be used
5 bits; Number of access
channels -1
4 bits; Nominal transmit power
offset in dB
5 bits; Initial power offset in dB
3 bits; Power increment
4 bits; 5 access probes/
sequence
3 bits; Maximum Access
channel message capsule size
=2 or 7 +3 frames
4 bits; Access Channel
preamble length = 2+1 frames
6 bits; Persistence value for
access overload classes 0-9
3 bits; Persistence value for
access overload classes 10
3 bits; Persistence value for
access overload classes 11
(emergency)
3 bits; Persistence value for
access overload classes 12
3 bits; Persistence value for
access overload classes 13
3 bits; Persistence value for
access overload classes 14
3 bits; Persistence value for
access overload classes 15
3 bits; Persistence modifier for
access channel attempts for
message transmissions
3 bits; Persistence modifier for
Access Channel attempts for
registrations
4 bits; Time Randomization for
Access Channel probes= 0 to
15 PN chips
4 bits; Acknowledgement
timeout = (value +2) * 80 ms
4 bits; Access Channel probe
back off = no back off
4 bits; Access channel probe
sequence backoff range =no
back off
4 bits; Max number of access
probe sequences for an
access channel request
4 bits; Max number of access
probe sequences for an
access channel response
2 bits; No authentication data
in access channel messages
0 or 32 bits
1 bits; Extended nominal
transmit power
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
242
ETSI TS 136 508 V15.5.0 (2019-07)
Extended System Parameters Message
Table 4.4.7.2.2-4: Extended System Parameters Message
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: C.S0005 clause 3.7.2.3.2.13
Information Element
PILOT_PN
CONFIG_MSG_SEQ
DELETE_FOR_TMSI
USE_TMSI
PREF_MSID_TYPE
243
Value/remark
See table 4.4.2-4
Set to '
CONFIG_SEQ' of
base station as
per clause
4.4.7.2.1
0
0 or 1
3
MCC
IMSI_11_12
See table 4.4.2-4
See table 4.4.2-4
TMSI_ZONE_LEN
TMSI_ZONE
BCAST_INDEX
IMSI_T_SUPPORTED
P_REV
MIN_P_REV
SOFT_SLOPE
ADD_INTERCEPT
DROP_INTERCEPT
PACKET_ZONE_ID
1 or 0
1 or Not present
0
0
6
6
0
0
0
0
MAX_NUM_ALT_SO
RESELECT_INCLUDED
0
0
EC_THRESH
EC_I0_THRESH
PILOT_REPORT
Not present
Not present
1 or 0
NGHBR_SET_ENTRY_INFO
ACC_ENT_HO_ORDER
NGHBR_SET_ACCESS_INFO
ACCESS_HO
ACCESS_HO_MSG_RSP
ACCESS_PROBE_HO
ACC_HO_LIST_UPD
ACC_PROBE_HO_OTHER_MSG
MAX_NUM_PROBE_HO
NGHBR_SET_SIZE
ACCESS_ENTRY_HO
0
Not present
0
Not present
Not present
Not present
Not present
Not present
Not present
Not present
ACCESS_HO_ALLOWED
BROADCAST_GPS_ASST
Not present
Not present
0
QPCH_SUPPORTED
NUM_QPCH
QPCH_RATE
QPCH_POWER_LEVEL_PAGE
QPCH_CCI_SUPPORTED
QPCH_POWER_LEVEL_CONFIG
SDB_SUPPORTED
0
Not present
Not present
Not present
Not present
Not present
0
RLGAIN_TRAFFIC_PILOT
0
REV_PWR_CNTL_DELAY_INCL
REV_PWR_CNTL_DELAY
0
Not present
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
Comment
9 bits
6 bits
1 bits; Delete foreign TMSI
1 bits; Use TMSI indicator
2 bits; Preferred Access
Channel MSID Type
10 bits
7 bits; 11th and 12th digits of
the IMSI
4 bits
8 bits if present
3 bits
1 bits
8 bits
8 bits
6 bits
6 bits; 0 dB
6 bits; 0 dB
8 bits; Packet data service
zone not supported
3 bits
1 bits; System reselection
parameters not included
0 or 5 bits
0 or 5 bits
1 bits; Pilot Report indicator;
the MS reports or does not
report additional pilots which
have strengths exceeding
T_ADD
1 bits
0 or 1 bits
1 bits
0 or 1 bits
0 or 1 bits
0 or 1 bits
0 or 1 bits
0 or 1 bits
0 or 3 bits
0 or 6 bits
1 bits; Access Entry Handoff
not permitted
1 bits
1 bits; Broad cast GPS not
supported
1 bits; Quick PCH not
supported
0 or 2 bits
0 or 1 bits
0 or 3 bits
0 or 1 bits
0 or 3 bits
1 bits; Short Data burst not
supported
6 bits; 0 dB Gain adjustment of
Reverse traffic channel
1 bits
0 or 2 bits
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
244
ETSI TS 136 508 V15.5.0 (2019-07)
Neighbor List Message
This message is sent when EXT_NGHBR_LST in Systems parameter message is set as '0'B i.e. the band class is 0;
Table 4.4.7.2.2-6: Neighbor List Message
Derivation Path: C.S0005 clause 3.7.2.3.2.3
Information Element
PILOT_PN
CONFIG_MSG_SEQ
PILOT_INC
Value/remark
See table 4.4.2-4
Set to '
CONFIG_SEQ' of
base station as
per clause
4.4.7.2.1
10 or 1
NGHBR_CONFIG(n)
NGHBR_PN(n)
0 or Not present
See table 4.4.2-4
or Not Present
Note 1: the elements with index n are repeated as per table 4.4.2-5
-
Comment
Condition
9 bits
6 bits
4 bits; Pilot PN Sequence
offset index increment = n * 50
9 bits if present
Extended Neighbor List Message
This message is sent when EXT_NGHBR_LST in Systems parameter message is set as '1'B i.e. the band class is not 0;
Table 4.4.7.2.2-7: Extended Neighbor List Message
Derivation Path: C.S0005 clause 3.7.2.3.2.14
Information Element
PILOT_PN
CONFIG_MSG_SEQ
PILOT_INC
Value/remark
See table 4.4.2-4
Set to '
CONFIG_SEQ' of
base station as
per clause
4.4.7.2.1
10 or 1
NGHBR_CONFIG(n)
0 or Not present
NGHBR_PN(n)
Comment
Condition
9 bits
6 bits
4 bits; Pilot PN Sequence
offset index increment = n * 50
3 bits if present;
Neighbor configuration where
neighbor base station has
same number of frequencies
having paging channels as the
current base station;
9 bits if present
See table 4.4.2-4
or Not present
SEARCH_PRIORITY(n)
1, 2 or Not
2 bits if present; Medium
present
search priority
FREQ_INCL(n)
1
1 bit
InterFreqCell
0 or Not present
NGHBR_BAND(n)
Set according to
0 or 5 bits
InterFreqCell
PIXIT parameter
Not present
NGHBR_FREQ(n)
Set according to
0 or 11 bits
InterFreqCell
PIXIT parameter
Not Present
Note 1: The elements with index n are repeated as per table 4.4.2-5. The SS can transmit up to 7 neighbour intra
frequency cell information. The parameters for the first cell should be set as per table 4.4.2-4.
Condition
InterFreqCell
Explanation
If the configured neighbour cell is on a different frequency compared to the cell in which
Extended Neighbour list message is being transmitted
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
245
ETSI TS 136 508 V15.5.0 (2019-07)
Sync channel Messages
Table 4.4.7.2.2-8: Sync Channel Message
Derivation Path: C.S0005 clause 3.7.2.3.2.26
Information Element
P_REV
MIN_P_REV
SID
NID
PILOT_PN
LC_STATE
See table 4.4.2-4
See table 4.4.2-4
See table 4.4.2-4
A valid value,
calculated and
updated by the SS
A valid value,
calculated and
updated by the SS
A valid value,
calculated and
updated by the SS
A valid value,
calculated and
updated by the SS
A valid value,
calculated and
updated by the SS
0
SYS_TIME
LP_SEC
LTM_OFF
DAYLT
PRAT
CDMA_FREQ
Set according to
PIXIT parameter
or as per clause
4.3.1.4
Set according to
PIXIT parameter
or as per clause
4.3.1.4
EXT_CDMA_FREQ
4.4.8
Value/remark
6
6
Comment
8 bits; Protocol revision level
8 bits; Minimum protocol
revision level
15 bits
16 bits
9 bits
42 bits; Long code State
36 bits; System time
8 bits; The number of leap
seconds
6 bits; Offset of local time from
System time
1 bits; Daylight savings
indicator
2 bits; Paging Channel Data
rate=9600 bps
11 bits; Frequency assignment
11 bits; Extended frequency
assignment
Common parameters for simulated WLAN AP’s
The parameters specified in this subclause apply to all simulated WLAN APs unless otherwise specified.
Default WLAN parameters for simulated APs are specified in table 4.4.8-1.
Table 4.4.8-1: Default parameters for simulated WLAN APs
Parameter
SSID
Security
Hot Spot 2.0 Support
Trusted/Un-Trusted non
3GPP Access
EAP-AKA Procedure
Beacon RSSI
Beacon RSSI
Value
Condition
3GPP WLAN
InterWorking
[WPA2]
Yes
Un-Trusted
CHAP
42 (-86 dBm), NOTE 1
OFFLOAD
Configured at the SS
IMSoWLAN
according to PIXIT
parameter
NOTE 1: The power level is specified at each UE Rx antenna.
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
246
Condition
ETSI TS 136 508 V15.5.0 (2019-07)
Explanation
OFFLOAD
WLAN offload scenarios
IMSoWLAN
IMS over WLAN scenarios
Table 4.4.8-2: Default parameters for simulated WLAN APs (2nd WLAN)
Parameter
Value
SSID
Security
Hot Spot 2.0 Support
Trusted/Un-Trusted non
3GPP Access
EAP-AKA Procedure
Beacon RSSI
Beacon RSSI
Condition
3GPP WLAN
InterWorking 2
[WPA2]
Yes
Un-Trusted
CHAP
42 (-86 dBm), NOTE 1
OFFLOAD
Configured at the SS
IMSoWLAN
according to PIXIT
parameter
NOTE 1: The power level is specified at each UE Rx antenna.
Condition
4.5
Explanation
OFFLOAD
WLAN offload scenarios
IMSoWLAN
IMS over WLAN scenarios
Generic procedures
This clause describes UE test states which can be used in the initial condition of many test cases defined in TS 36.521-1
[21], TS 36.523-1 [18] and TS 36.523-3 [34] or other procedures defined in this specification. This section also defines
a set of procedures to bring the UE into these states.
4.5.1
NOTE:
UE test states
The need to have a procedure for the transition from State 4/State 3 to State 2 is for further study and it
can added if the technical motivation for this procedure can be justified.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
247
ETSI TS 136 508 V15.5.0 (2019-07)
State 1
Switched OFF
State 2
Registered,
Idle Mode
State 2A
Registered, Idle Mode,
UE Test Mode
Activated
State 2B
Registered, Idle Mode,
pre-registered on HRPD
State 2C
Registered, Idle Mode,
pre-registered on 1xRTT
State 3
Generic RB
Established
State 3A
Generic RB Established,
UE Test Mode Activated
State 3B
Generic RB
Established, preregistered on HRPD
State 3C
Generic RB Established,
pre-registered on 1xRTT
State 5
Out of
Coverage
State 4
Loopback
Activated
State 2-CE
Registered,
Idle Mode
State 2A-CE
Registered, UE Test
Mode Activated
State 5-V2X
Out of
Coverage, V2X
Setup
State 3-CE
Generic RB
Established
State 3A-CE
Generic RB
Established, UE Test
Mode Activated
State 5A-V2X
Out of Coverage, Test
Loopback Activated,
V2X Setup
State 4-CE
Loopback
Activated
Figure 4.5.1-1: E-UTRAN UE Test States for Basic Generic Procedures
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
248
ETSI TS 136 508 V15.5.0 (2019-07)
State 1
Switched OFF
State 2-CE
Registered,
Idle Mode
State 2
Registered,
Idle Mode
State 2A-CE Registered,
Idle Mode, UE Test
Mode Activated
State 2A Registered,
Idle Mode, UE Test
Mode Activated
State 3-CP
CIoT CP
Connection
Established
State 3-UP
CIoT UP
Connection
Established
State 3A-CP CIoT CP
Connection Established,
UE Test Mode Activated
State 3A-UP CIoT UP
Connection Established,
UE Test Mode Activated
State 4A-UP
Loopback Activation
User Plane
Figure 4.5.1-2: E-UTRAN UE Test States for CIoT
NOTE:
Transition to state 5 is performed only when Test Loop Mode E is required to be performed when UE is
out of coverage.
In order that the UE can set up a call or session in E-UTRAN, there are a number of procedures to be undertaken in a
hierachical sequence to move between known states. The sequences are shown in figure 4.5.1-1 and the status of the
relevant protocols in the UE in the different states are given in table 4.5.1-1.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
249
Table 4.5.1-1: The E-UTRAN UE states
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
RRC
250
ECM
ETSI TS 136 508 V15.5.0 (2019-07)
EMM
ESM
State 1 Switched OFF ----State 2 Registered,
RRC_IDLE
Idle Mode
----ECM-IDLE
----EMM-REGISTERED
State
2-CE
RRC_IDLE
ECM-IDLE
EMM-REGISTERED
RRC_IDLE
ECM-IDLE
EMM-REGISTERED
1 default EPS
bearer context
active.
Active
RRC_IDLE
ECM-IDLE
EMM-REGISTERED
1 default EPS
bearer context
active.
Active
RRC_IDLE
ECM-IDLE
EMM-REGISTERED
1 default EPS
bearer context
active.
Active
RRC_IDLE
ECM-IDLE
EMM-REGISTERED
1 default EPS
bearer context
active.
Active
RRC_CONNECT
ED
1 + N (0 ≤ N ≤ 7)
data radio bearers
configured as
specified in the
test cases.
2 + N (0 ≤ N ≤ 7)
data radio bearers
configured as
specified in the
test cases (only
for for RAN
Assisted WLAN
interworking)
ECM-CONNECTED
EMM-REGISTERED
RRC_CONNECT
ED
ECM-CONNECTED
EMM-REGISTERED
1 default EPS
Not
bearer context
active
active and N (0 ≤
N ≤ 7) dedicated
EPS bearers
active as
specified in the
test cases.
2 default EPS
bearer contexts
active and N (0 ≤
N ≤ 7) dedicated
EPS bearers
active as
specified in the
test cases (only
for RAN Assisted
WLAN
interworking)
Not
active
RRC_CONNECT
ED
ECM-CONNECTED
EMM-REGISTERED
-
Active
RRC_CONNECT
ED
ECM-CONNECTED
EMM-REGISTERED
1 default EPS
bearer context
active.
Not
active
Registered,
Idle Mode,
Cell
supporting
BL/CE UE
State
Registered,
2A
Idle Mode, UE
Test Mode
Activated
State
Registered,
2A-CE Idle Mode,
Cell
supporting
BL/CE UE,
UE Test Mode
Activated
State
Registered,
2B
Idle Mode,
pre-registered
on HRPD
State
Registered,
2C
Idle Mode,
pre-registered
on 1xRTT
State 3 Generic RB
Established
State
3-CP
State
3A-CP
State
3-UP
CIoT CP
Connection
Established
CIoT CP
Connection
Established,
UE Test Mode
Activated
CIoT UP
Connection
Established
ETSI
----1 default EPS
bearer context
active.
2 default EPS
bearer contexts
active (only for
RAN Assisted
WLAN
interworking)
1 default EPS
bearer context
active.
UE
Test
Mode
----Not
active
Not
active
3GPP TS 36.508 version 15.5.0 Release 15
State
3A-UP
State
4A-UP
State
3-CE
CIoT UP
Connection
Established,
UE Test Mode
Activated
Loopback
Activation
User Plane
Generic RB
Established,
Cell
supporting
BL/CE UE
251
ETSI TS 136 508 V15.5.0 (2019-07)
RRC_CONNECT
ED
ECM-CONNECTED
EMM-REGISTERED
1 default EPS
bearer context
active.
Active
RRC_CONNECT
ED
ECM-CONNECTED
EMM-REGISTERED
Active
RRC_CONNECT
ED
1 + N (0 ≤ N ≤ 7)
data radio bearers
configured as
specified in the
test cases.
ECM-CONNECTED
EMM-REGISTERED
1 default EPS
bearer context
active.
1 default EPS
bearer context
active and N (0 ≤
N ≤ 7) dedicated
EPS bearers
active as
specified in the
test cases.
1 default EPS
bearer context
active and N (0 ≤
N ≤ 7) dedicated
EPS bearers
active as
specified in the
test cases
1 default EPS
bearer context
active and N (0 ≤
N ≤ 7) dedicated
EPS bearers
active as
specified in the
test cases
1 default EPS
bearer context
active and N (0 ≤
N ≤ 7) dedicated
EPS bearers
active as
specified in the
test cases
1 default EPS
bearer context
active and N (0 ≤
N ≤ 7) dedicated
EPS bearers
active as
specified in the
test cases
1 default EPS
bearer context
active and N (0 ≤
N ≤ 7) dedicated
EPS bearers
active as
specified in the
test cases
1 default EPS
bearer context
active
Not
active
State
3A
Generic RB
Established,
UE Test Mode
Activated
RRC_CONNECT
ED
1 + N (0 ≤ N ≤ 7)
data radio bearers
configured as
specified in the
test cases
ECM-CONNECTED
EMM-REGISTERED
State
3A-CE
Generic RB
Established,
UE Test Mode
Activated, Cell
supporting
BL/CE UE,
UE Test Mode
Activated
Generic RB
Established,
pre-registered
on HRPD
RRC_CONNECT
ED
1 + N (0 ≤ N ≤ 7)
data radio bearers
configured as
specified in the
test cases
ECM-CONNECTED
EMM-REGISTERED
RRC_CONNECT
ED
1 + N (0 ≤ N ≤ 7)
data radio bearers
configured as
specified in the
test cases
ECM-CONNECTED
EMM-REGISTERED
Generic RB
Established,
pre-registered
on 1xRTT
RRC_CONNECT
ED
1 + N (0 ≤ N ≤ 7)
data radio bearers
configured as
specified in the
test cases
ECM-CONNECTED
EMM-REGISTERED
State 4 Loopback
Activated
RRC_CONNECT
ED
1 + N (0 ≤ N ≤ 7)
data radio bearers
configured as
specified in the
test cases
ECM-CONNECTED
EMM-REGISTERED
State
4-CE
RRC_CONNECT
ED
1 data radio
bearer configured
Any Cell Selection
state
Any Cell Selection
state
ECM-CONNECTED
EMM-REGISTERED
-----
-----
-----
Active
-----
-----
-----
Not
active
State
3B
State
3C
Loopback
Activated, Cell
supporting
BL/CE UE
State 5 Out of
Coverage
State
Out of
5-V2X Coverage,
V2X setup
ETSI
Active
Active
Active
Active
Active
Active
3GPP TS 36.508 version 15.5.0 Release 15
State
5AV2X
Out of
Coverage,
Loopback
Activated,
V2X setup
Any Cell Selection
state
252
-----
ETSI TS 136 508 V15.5.0 (2019-07)
-----
-----
Active
NOTE: Refer to TS 24.301 [28] subclause 5.5.1.1 for more details on the ESM state.
NOTE: Refer to TS 36.509 [38] for details regarding UE test mode and UE Loopback.
State 1
Switched OFF
State H2
HRPD Registered,
Dormant Mode
State H2A
HRPD Registered,
Dormant Mode,
pre-registered on E-UTRAN
State H3
QoS Flow Established,
Connected Mode
State H3A
QoS Flow Established,
Connected Mode
pre-registered on E-UTRAN
Figure 4.5.1-2: HRPD UE Test States for Basic Generic Procedures
In order for the UE to set up a session in an HRPD RAN, there are a number of procedures that need to be performed in
a certain sequence to move between known UE states. These states and sequences are shown in figure 4.5.1-2. HRPD
UE states are described in table 4.5.1-2.
Table 4.5.1-2: Description of HRPD UE states
State
H2
H3
H2A
H3A
4.5.2
Description
The UE is registered on the HRPD network, but has no active connection to the network. The InterRAT Idle State Protocol (IR-ISP) is in Monitor State. The UE should be ready to perform a nonoptimised cell reselection to E-UTRAN (as per [41] cl. 8 and [42] cl. 14.1).
The UE is registered on the HRPD network, and has an active network connection. The UE should
be ready to perform a non-optimised handover to E-UTRAN (as per [41] cl. 8).
Same state as State H2, but the UE is also pre-registered in E-UTRAN. The UE should be ready to
perform an optimised cell reselection to E-UTRAN (as per [41] cl. 9.6).
Same state as State H3, but the UE is also pre-registered in E-UTRAN. The UE should be ready to
perform an optimised handover to E-UTRAN (as per [41] cl. 9.5).
UE Registration (State 2)
IF pc_ue_CategoryDL_M1 THEN use the procedure for State 2-CE according to clause 4.5.2AA ELSE use the
procedure defined in the present clause.
NOTE:
The statement to use alternate procedure for CAT M1 UE (pc_ue_CategoryDL_M1 is set) is to enable
LTE legacy protocol test cases to be used for CAT M1 UE testing. Any CAT M1 or CE specific test cases
should not rely on this statement, but refer directly to the relevant CE specific state.
UE Registration depends on the specific configuration of a UE, which is expressed by PICS according to TS 36.523-2
[19]. In order to reduce complexity and to achieve testability several assumptions and definitions are made:
-
An IMS capable UE is compliant to GSMA PRD IR.92 [52];
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
253
ETSI TS 136 508 V15.5.0 (2019-07)
-
During initial UE registration the UE requests for one or two PDN connectivities;
-
When the UE requests for two PDN connectivities:
-
it re-uses the existing RRC connection for signalling regarding the 2nd PDN connectivity;
-
one of the PDN connectivities is for IMS;
-
If the UE is configured with an APN for XCAP only usage (pc_XCAP_only_APN==true), connectivity to this
PDN is not established during the initial UE registration;
-
As for any 2nd PDN connectivity request security protection is already established the UE provides a valid APN
in the PDN CONNECTIVITY REQUEST.
In detail the following UE configurations are supported:
Configuration
IMS_Only
Condition
pc_IMS AND NOT
pc_Provide_Internet_as_second_APN
AND NOT
pc_Provide_IMS_as_second_APN
NOT pc_IMS
pc_IMS AND
pc_Provide_Internet_as_second_APN
pc_IMS AND
pc_Provide_IMS_as_second_APN
Internet_Only
IMS_Internet
Explanation
UE is configured to request for IMS PDN connectivity only
UE does not support IMS
UE is configured to request for IMS PDN connectivity first
and then to request for an internet PDN connectivity
Internet_IMS
UE is configured to request for an internet PDN
connectivity first and then to request for the IMS PDN
connectivity
NOTE 1: pc_Provide_Internet_as_second_APN and pc_Provide_IMS_as_second_APN are mutually exclusive i.e.
shall not be true at the same time.
NOTE 2: IMS_Only configuration is not considered for EN-DC test cases defined in TS 38.523-1 [71]
Further auxiliary definitions:
Configuration
PDN1_IMS
PDN2_IMS
PDN1_INTERNET_ONLY
MULTI_PDN
XCAP_SIGNALLING
EN-DC
4.5.2.1
Condition
IMS_Only OR IMS_Internet
Internet_IMS
Internet_Only
IMS_Internet OR Internet_IMS
test case requires XCAP signalling
Applicable to EN-DC test cases defined in TS 38.523-1 [71]
Initial conditions
System Simulator:
-
1 cell, default parameters.
-
The procedure shall be performed under ideal radio conditions as defined in clause 5
User Equipment:
-
The Test UICC shall be inserted. This shall contain either ISIM and USIM applications or only a USIM
application on UICC.
-
If RAN Assisted WLAN interworking test cases are being performed for ANDSF rules using RAN provided
thresholds, ANDSF rules to match the RAN rules defined in TS 36.304 shall be available in the UE.
4.5.2.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.2.3
254
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5.2.3-1: UE registration procedure (state 1 to state 2)
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Step
1
2
3
4
5
6
7
8
-
9a1
9a2
10
11
12
13
-
13Aa
1
13Aa
2
255
Procedure
UE transmits an RRCConnectionRequest
message.
SS transmits an RRCConnectionSetup
message.
The UE transmits an
RRCConnectionSetupComplete message to
confirm the successful completion of the
connection establishment and to initiate the
Attach procedure by including the ATTACH
REQUEST message. The PDN
CONNECTIVITY REQUEST message is
piggybacked in ATTACH REQUEST
The SS transmits an AUTHENTICATION
REQUEST message to initiate the EPS
authentication and AKA procedure.
The UE transmits an AUTHENTICATION
RESPONSE message and establishes mutual
authentication.
The SS transmits a NAS SECURITY MODE
COMMAND message to activate NAS
security.
The UE transmits a NAS SECURITY MODE
COMPLETE message and establishes the
initial security configuration.
EXCEPTION: Steps 9a1 to 9a2 describe
behaviour that depends on UE configuration;
the "lower case letter" identifies a step
sequence that take place if the UE has ESM
information which needs to be transferred.
IF the UE sets the ESM information transfer
flag in the last PDN CONNECTIVITY
REQUEST message THEN the SS transmits
an ESM INFORMATION REQUEST message
to initiate exchange of protocol configuration
options and/or APN.
The UE transmits an ESM INFORMATION
RESPONSE message to transfer protocol
configuration options and/or APN.
The SS transmits a SecurityModeCommand
message to activate AS security.
The UE transmits a SecurityModeComplete
message and establishes the initial security
configuration.
The SS transmits a UECapabilityEnquiry
message including RAT-Type eutra to initiate
the UE radio access capability transfer
procedure.
The UE transmits a UECapabilityInformation
message to transfer UE radio access
capability.
EXCEPTION: Steps 13Aa1 to 13Aa2 describe
behaviour that depends on the UE
implementation; the "lower case letter"
identifies a step sequence that take place
depending on the UE implementation.
IF EN-DC, then, the SS transmits a
UECapabilityEnquiry message including RATType eutra-nr and nr to initiate the UE radio
access capability transfer procedure.
The UE transmits a UECapabilityInformation
message to transfer UE radio access
capability.
U-S
<--->
<--->
<--->
<--->
-
ETSI TS 136 508 V15.5.0 (2019-07)
Message Sequence
Message
RRC: SYSTEM INFORMATION (BCCH)
RRC: RRCConnectionRequest
RRC: RRCConnectionSetup
RRC: RRCConnectionSetupComplete
NAS: ATTACH REQUEST
NAS: PDN CONNECTIVITY REQUEST
RRC: DLInformationTransfer
NAS: AUTHENTICATION REQUEST
RRC: ULInformationTransfer
NAS: AUTHENTICATION RESPONSE
RRC: DLInformationTransfer
NAS: SECURITY MODE COMMAND
RRC: ULInformationTransfer
NAS: SECURITY MODE COMPLETE
-
<--
RRC: DLInformationTransfer
NAS: ESM INFORMATION REQUEST
-->
RRC: ULInformationTransfer
NAS: ESM INFORMATION RESPONSE
<--
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: UECapabilityEnquiry
-->
RRC: UECapabilityInformation
-
-
<--
RRC: UECapabilityEnquiry
-->
RRC: UECapabilityInformation
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
14
15
-
-
16
-
16a1
16a2
16b6
16c1
17
-
18a1
18b1
256
ETSI TS 136 508 V15.5.0 (2019-07)
The SS transmits an
RRCConnectionReconfiguration message to
establish the default bearer with condition
SRB2-DRB(1, 0) according to 4.8.2.2.1.1.
This message includes the ATTACH ACCEPT
message. The ACTIVATE DEFAULT EPS
BEARER CONTEXT REQUEST message is
piggybacked in ATTACH ACCEPT.
The UE transmits an
RRCConnectionReconfigurationComplete
message to confirm the establishment of
default bearer.
EXCEPTION: In parallel to the event
described in step 16 below, if initiated by the
UE the generic procedure for IP address
allocation in the U-plane specified in TS
36.508 subclause 4.5A.1 takes place
performing IP address allocation in the Uplane.
EXCEPTION: IF PDN1_IMS THEN in parallel
to the event described in step 16 below the
generic procedure for IMS signalling in the Uplane specified in TS 36.508 subclause
4.5A.3 takes place if requested by the UE
This message includes the ATTACH
COMPLETE message. The ACTIVATE
DEFAULT EPS BEARER CONTEXT
ACCEPT message is piggybacked in
ATTACH COMPLETE.
EXCEPTION: Steps 16a1 to 16c1 describe
behaviour that depends on test case
requirements and UE behaviour; the "lower
case letter" identifies the different branches.
IF IMS VoPS is set to ‘0’ in ATTACH ACCEPT
at step 14 THEN the procedure according to
Table 4.5.2.3-2 takes place
Void.
<--
RRC: RRCConnectionReconfiguration
NAS: ATTACH ACCEPT
NAS: ACTIVATE DEFAULT EPS
BEARER CONTEXT REQUEST
-->
RRC:
RRCConnectionReconfigurationComplete
ELSE IF MULTI_PDN = TRUE THEN
The generic procedure for UE establishing
additional PDN connectivity as specified in TS
36.508 subclause 4.5A.16 takes place
The SS transmits an RRCConnectionRelease
message to release RRC connection and
move to RRC_IDLE (State 2).
EXCEPTION: Steps18a1 to 18b1 describe
behaviour that depends on UE
capabilities/configuration and test
requirements; the "lower case letter" identifies
a step sequence that takes place if one of
those is supported/configured.
IF additional PDN has been established AND
(pc_XCAP_only_APN OR NOT
XCAP_SIGNALLING)
AND
pc_UE_supports_user_initiated_PDN_discon
nect THEN
the non-IMS PDN shall be released as
specified in TS 36.508 subclause 4.5A.17
IF additional PDN has been established AND
(pc_XCAP_only_APN OR NOT
XCAP_SIGNALLING)
AND NOT
pc_UE_supports_user_initiated_PDN_discon
nect THEN
the non-IMS PDN shall be released as
specified in TS 36.508 subclause 4.5A.18
-
-
-
-
-->
RRC: ULInformationTransfer
NAS: ATTACH COMPLETE
NAS: ACTIVATE DEFAULT EPS
BEARER CONTEXT ACCEPT
-
-
-
-
-
-
-
-
<--
RRC: RRCConnectionRelease
-
-
-
-
-
-
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
257
ETSI TS 136 508 V15.5.0 (2019-07)
NOTE 1: Void
NOTE 2: Void
Table 4.5.2.3-2: Specific behaviour when IMS voice is not supported by the network
Step
Procedure
Message Sequence
Message
U-S
-
1a1
EXCEPTION: Steps 1a1 to 1b6 describe
behaviour that depends on UE configuration;
the "lower case letter" identifies the different
branches
IF pc_voice_PS_1_CS_2, pc_attach and
pc_TAU_connected_in_IMS are set to TRUE
(Note 1) THEN
The UE transmits a TRACKING AREA
UPDATE REQUEST message.
The SS transmits a TRACKING AREA
UPDATE ACCEPT message.
-
-
-->
RRC: ULInformationTransfer
NAS: TRACKING AREA UPDATE
REQUEST
<--
1a3
The UE transmits a TRACKING AREA
UPDATE COMPLETE message.
-->
1b1
ELSE IF pc_voice_PS_1_CS_2, pc_attach
and pc_TAU_idle_in_IMS are set to TRUE
(Note 2) THEN
The SS transmits an RRCConnectionRelease
message to release the RRC connection.
The UE transmits an RRCConnectionRequest
message.
The SS transmit an RRCConnectionSetup
message.
The UE transmits an
RRCConnectionSetupComplete message
including a TRACKING AREA UPDATE
REQUEST message.
The SS transmits a TRACKING AREA
UPDATE ACCEPT message.
<--
RRC: DLInformationTransfer
NAS: TRACKING AREA UPDATE
ACCEPT
RRC: ULInformationTransfer
NAS: TRACKING AREA UPDATE
COMPLETE
RRC: RRCConnectionRelease
-->
RRC: RRCConnectionRequest
<--
RRC: RRCConnectionSetup
-->
RRC: RRCConnectionSetupComplete
NAS: TRACKING AREA UPDATE
REQUEST
<--
The UE transmits a TRACKING AREA
UPDATE COMPLETE message.
-->
RRC: DLInformationTransfer
NAS: TRACKING AREA UPDATE
ACCEPT
RRC: ULInformationTransfer
NAS: TRACKING AREA UPDATE
COMPLETE
-
1a2
1b2
1b3
1b4
1b5
1b6
2
-
start timer Timer_1 = 5 s
EXCEPTION: Steps 3a1 to 3b1 describe
behaviour that depends on UE behaviour; the
"lower case letter" identifies the different
branches
3a1
The generic procedure for UE establishing
additional PDN connectivity as specified in TS
36.508 subclause 4.5A.16 takes place
3a2
Stop Timer_1
3b1
Timer_1 expires
NOTE 1: The procedure is used with specific message with no IMS voice network support. The UE is
configured for voice domain preference IMS PS voice preferred, CS Voice as secondary and to
initiate EPS attach. The UE implementation supports TAU in connected mode,
NOTE 2: The procedure is used with specific message with no IMS voice network support. The UE is
configured for voice domain preference IMS PS voice preferred, CS Voice as secondary and to
initiate EPS attach. The UE implementation supports TAU in idle mode,
4.5.2.4
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7 with the exceptions below.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
258
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2.4-1: RRCConnectionRequest (Step 2)
Derivation Path: Table 4.6.1-16
Information Element
RRCConnectionRequest ::= SEQUENCE {
criticalExtensions CHOICE {
rrcConnectionRequest-r8 SEQUENCE {
ue-Identity
}
}
}
Value/remark
Comment
Condition
Any allowed value
Table 4.5.2.4-2: UECapabilityInformation (Steps 13 and 13Aa2)
Derivation Path: Table 4.6.1-23
Information Element
UECapabilityInformation ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE{
ueCapabilityInformation-r8
}
}
}
Value/remark
Any allowed value
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
259
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2.4-3: ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST (Step 14)
Derivation Path: Table 4.7.3-6 with condition IMS_PDN_ConnEstab for PDN1_IMS and NOT IMS_PDN_ConnEstab
Information Element
Value/remark
Comment
Condition
EPS bearer identity
'0101'B
arbitrary value
PDN1_IMS
used for PDN
OR
connectivity being (PDN2_IMS
maintained during AND
the test case
ImsVoPS0_
NoImsPDN)
OR NOT
MULTI_PDN
EPS bearer identity
‘1100’B
arbitrary value
MULTI_PDN
used for additional AND NOT
PDN connectivity
PDN1_IMS
which may be
AND NOT
released before
(PDN2_IMS
entering the test
AND
procedure of the
ImsVoPS0_
test case
NoImsPDN)
EPS bearer identity
‘0101’B
arbitrary value
EN-DC AND
used for IMS PDN PDN1_IMS
connectivity being
maintained during
EN-DC test case
EPS bearer identity
‘1100’B
arbitrary value
EN-DC AND
used for non-IMS
(PDN1_INT
PDN connectivity
ERNET_ON
being maintained
LY OR
during EN-DC test PDN2_IMS)
case
PDN address
IPv4_addres
s_only
Length of PDN address contents
5 octets
PDN type value
‘001’B
IPv4
PDN address information
IPv4 address
The SS provides a NOT IPv4valid IPv4 address DHCP
0.0.0.0
DHCPv4 is to be
IPv4-DHCP
used to allocate
the IPv4 address
ESM cause
IF “PDN type” IE in step 4 “PDN type IPv4
is ‘IPv4v6’ THEN
only allowed”
‘00110010’B ELSE Not
present
NOTE:
The default message contents specified in table 4.7.3-6 apply unless the condition IPv4_address_only in
table 4.5.2.4-3 is true.
Condition
IPv4_address_only
IPv4-DHCP
Explanation
This condition applies if the test case preamble description indicates that the UE is
allocated an IPv4 address only.
If in the last PDN CONNECTIVITY REQUEST or ESM INFORMATION RESPONSE sent
prior to this message, the IE Protocol configuration options contains a configuration
protocol option = ‘000B00H’ (“IPv4 address allocation via DHCPv4”, length of contents = 0).
Note 1:
This condition is used in conjunction with IPv4 or IPv4v6 as indicated in the
“PDN address row” just above.
Note 2:
ImsVoPS0_NoImsPDN
If both messages, PDN CONNECTIVITY REQUEST and ESM INFORMATION
RESPONSE, are received and contain a Protocol configuration options IE then
the IE from the message which is received later shall be used.
If the test case sets IMS VoPS to 0 AND (pc_UE_NoReqIMS_IMSVoPS_0 == TRUE)
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
260
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2.4-4: TRACKING AREA UPDATE REQUEST (Steps 16a1 and 16b4)
Derivation Path: 36.508 Table 4.7.2-27 with condition combined_TA_LA
Table 4.5.2.4-5: TRACKING AREA UPDATE ACCEPT (Steps 16a2 and 16b5)
Derivation Path: 36.508 Table 4.7.2-24 with condition combined_TA_LA
4.5.2A
UE Registration, UE Test Mode Activated (State 2A)
IF pc_ue_CategoryDL_M1 THEN use the procedure for State 2A-CE according to clause 4.5.2AB ELSE use the
procedure defined in the present clause.
NOTE:
The statement to use alternate procedure for CAT M1 UE (pc_ue_CategoryDL_M1 is set) is to enable
LTE legacy protocol test cases to be used for CAT M1 UE testing. Any CAT M1 or CE specific test cases
should not rely on this statement, but refer directly to the relevant CE specific state.
The same assumptions and definitions apply as in clause 4.5.2.
4.5.2A.1
Initial conditions
System Simulator:
-
1 cell, default parameters.
-
The procedure shall be performed under ideal radio conditions as defined in clause 5
User Equipment:
-
The Test USIM shall be inserted.
4.5.2A.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.2A.3
261
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5.2A.3-1: UE registration with test mode activation procedure (state 1 to state 2A)
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Step
1 to
9a2
10
11
12
13
14
15
-
15Aa
1
15Aa
2
16
17
-
18
-
18a1
262
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Same procedure for steps 1 to 9a2 as
specified in the procedure in clause 4.5.2.3
The SS transmits an ACTIVATE TEST MODE
message to activate UE radio bearer test
mode procedure.
The UE transmits an ACTIVATE TEST MODE
COMPLETE message.
The SS transmits a SecurityModeCommand
message to activate AS security.
The UE transmits a SecurityModeComplete
message and establishes the initial security
configuration.
The SS transmits a UECapabilityEnquiry
message including RAT-Type eutra to initiate
the UE radio access capability transfer
procedure.
The UE transmits a UECapabilityInformation
message to transfer UE radio access
capability.
EXCEPTION: Steps 15Aa1 to 15Aa2 describe
behaviour that depends on the UE
implementation; the "lower case letter"
identifies a step sequence that take place
depending on the UE implementation.
IF EN-DC, then, the SS transmits a
UECapabilityEnquiry message including RATType eutra-nr and nr to initiate the UE radio
access capability transfer procedure.
The UE transmits a UECapabilityInformation
message to transfer UE radio access
capability.
The SS transmits an
RRCConnectionReconfiguration message to
establish the default bearer with condition
SRB2-DRB(1, 0) according to 4.8.2.2.1.1.
This message includes the ATTACH ACCEPT
message. The ACTIVATE DEFAULT EPS
BEARER CONTEXT REQUEST message is
piggybacked in ATTACH ACCEPT.
The UE transmits an
RRCConnectionReconfigurationComplete
message to confirm the establishment of
default bearer.
EXCEPTION: In parallel to the event
described in step 18 below the generic
procedure for IP address allocation in the Uplane specified in TS 36.508 subclause
4.5A.1 takes place performing IP address
allocation in the U-plane if requested by the
UE.
This message includes the ATTACH
COMPLETE message. The ACTIVATE
DEFAULT EPS BEARER CONTEXT
ACCEPT message is piggybacked in
ATTACH COMPLETE.
EXCEPTION: Steps18a1 to 18c1 describe
behaviour that depends on UE configuration;
the "lower case letter" identifies a step
sequence that takes place when the UE is
configured in a certain way.
IF IMS voice not supported and
pc_voice_PS_1_CS_2, pc_attach and
pc_TAU_connected_in_IMS are set to TRUE
(Note 1) THEN
The UE transmits a TRACKING AREA
UPDATE REQUEST message.
U-S
-
Message Sequence
Message
-
<--
RRC: DLInformationTransfer
TC: ACTIVATE TEST MODE
-->
<--
RRC: ULInformationTransfer
TC: ACTIVATE TEST MODE COMPLETE
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: UECapabilityEnquiry
-->
RRC: UECapabilityInformation
-
-
<--
RRC: UECapabilityEnquiry
-->
RRC: UECapabilityInformation
<--
RRC: RRCConnectionReconfiguration
NAS: ATTACH ACCEPT
NAS: ACTIVATE DEFAULT EPS
BEARER CONTEXT REQUEST
-->
RRC:
RRCConnectionReconfigurationComplete
-
-->
-
-->
ETSI
-
RRC: ULInformationTransfer
NAS: ATTACH COMPLETE
NAS: ACTIVATE DEFAULT EPS
BEARER CONTEXT ACCEPT
-
RRC: ULInformationTransfer
NAS: TRACKING AREA UPDATE
REQUEST
3GPP TS 36.508 version 15.5.0 Release 15
263
ETSI TS 136 508 V15.5.0 (2019-07)
18a2
The SS transmits a TRACKING AREA
UPDATE ACCEPT message.
<--
18a3
The UE transmits a TRACKING AREA
UPDATE COMPLETE message.
-->
18b1
ELSE IF IMS voice not supported and
pc_voice_PS_1_CS_2, pc_attach and
pc_TAU_idle_in_IMS are set to TRUE (Note
2) THEN
The SS transmits an RRCConnectionRelease
message to release the RRC connection.
The UE transmits an RRCConnectionRequest
message.
The SS transmit an RRCConnectionSetup
message.
The UE transmits an
RRCConnectionSetupComplete message
including a TRACKING AREA UPDATE
REQUEST message.
The SS transmits a TRACKING AREA
UPDATE ACCEPT message.
<--
RRC: DLInformationTransfer
NAS: TRACKING AREA UPDATE
ACCEPT
RRC: ULInformationTransfer
NAS: TRACKING AREA UPDATE
COMPLETE
RRC: RRCConnectionRelease
-->
RRC: RRCConnectionRequest
<--
RRC: RRCConnectionSetup
-->
RRC: RRCConnectionSetupComplete
NAS: TRACKING AREA UPDATE
REQUEST
<--
18b6
The UE transmits a TRACKING AREA
UPDATE COMPLETE message.
-->
18c118c3
ELSE IF MULTI_PDN = TRUE THEN
Steps from 1 to 3 from the generic procedure
for UE establishing additional PDN
connectivity as specified in TS 36.508
subclause 4.5A.16 takes place
EXCEPTION: In parallel to the event
described in step 18c4 below the generic
procedure for IP address allocation in the Uplane specified in TS 36.508 subclause
4.5A.1 takes place performing IP address
allocation in the U-plane if requested by the
UE.
The UE transmits an ACTIVATE DEFAULT
EPS BEARER CONTEXT ACCEPT message
-
RRC: DLInformationTransfer
NAS: TRACKING AREA UPDATE
ACCEPT
RRC: ULInformationTransfer
NAS: TRACKING AREA UPDATE
COMPLETE
-
-
-
18b2
18b3
18b4
18b5
-
18c4
-->
RRC: ULInformationTransfer
NAS:ACTIVATE DEFAULT EPS BEARER
CONTEXT ACCEPT
RRC: RRCConnectionRelease
The SS transmits an RRCConnectionRelease
<-message to release RRC connection and
move to RRC_IDLE (State 2A).
EXCEPTION: Steps 20a1 to 20b1 describe
behaviour that depends on UE
capabilities/configuration; the "lower case
letter" identifies a step sequence that takes
place if one of those is supported/configured.
20a1 IF MULTI_PDN
AND
pc_UE_supports_user_initiated_PDN_discon
nect THEN
the non-IMS PDN shall be released as
specified in TS 36.508 subclause 4.5A.17
20b1 IF MULTI_PDN
AND NOT
pc_UE_supports_user_initiated_PDN_discon
nect THEN
the non-IMS PDN shall be released as
specified in TS 36.508 subclause 4.5A.18
NOTE 1: The procedure is used with specific message with no IMS voice network support. The UE is
configured for voice domain preference IMS PS voice preferred, CS Voice as secondary and to
initiate EPS attach. The UE implementation supports TAU in connected mode.
NOTE 2: The procedure is used with specific message with no IMS voice network support. The UE is
configured for voice domain preference IMS PS voice preferred, CS Voice as secondary and to
initiate EPS attach. The UE implementation supports TAU in idle mode.
19
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.2A.4
264
ETSI TS 136 508 V15.5.0 (2019-07)
Specific message contents
All specific message contents shall be referred to clause 4.6, 4.7 and 4.7A with the exceptions below.
Table 4.5.2A.4-1: RRCConnectionRequest (Step 2)
Derivation Path: Table 4.6.1-16
Information Element
RRCConnectionRequest ::= SEQUENCE {
criticalExtensions CHOICE {
rrcConnectionRequest-r8 SEQUENCE {
ue-Identity
}
}
}
Value/remark
Comment
Condition
Any allowed value
Table 4.5.2A.4-2: UECapabilityInformation (Steps 15 and 15Aa2)
Derivation Path: Table 4.6.1-23
Information Element
UECapabilityInformation ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE{
ueCapabilityInformation-r8
}
}
}
Value/remark
Comment
Any allowed value
Table 4.5.2A.4-3: TRACKING AREA UPDATE REQUEST (Steps 18a1 and 18b4)
Derivation Path: 36.508 Table 4.7.2-27 with condition combined_TA_LA
Table 4.5.2A.4-4: TRACKING AREA UPDATE ACCEPT (Steps 18a2 and 18b5)
Derivation Path: 36.508 Table 4.7.2-24 with condition combined_TA_LA
4.5.2AA UE Registration in cell supporting BL/CE UE (State 2-CE)
The same assumptions and definitions apply as in clause 4.5.2.
4.5.2AA.1
Initial conditions
System Simulator:
-
1 cell, default parameters.
-
The procedure shall be performed under ideal radio conditions as defined in clause 5
User Equipment:
-
The Test USIM shall be inserted.
4.5.2AA.2
Definition of system information messages
The default system information messages are used with the exceptions below.
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
265
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2AA.2-1: MasterInformationBlock
Derivation Path: 36.508 Table 4.4.3.2-1 using condition CEmodeB if the test case specifically tests CE mode B else
use condition CEmodeA.
Table 4.5.2AA.2-2: SystemInformation-BR-r13
Derivation Path: 36.508 Table 4.4.3.2-2A.
Table 4.5.2AA.2-3: SystemInformationBlockType1-BR-r13
Derivation Path: 36.508 Table 4.4.3.2-3A using condition ENHANCED COVERAGE if the BL/CE UE initial condition is
intended to be in enhanced coverage; else use condition NORMAL COVERAGE.
4.5.2AA.3
Procedure
Table 4.5.2AA.3-1: UE registration procedure (state 1 to state 2-CE)
Step
1
2 to
18b1
Procedure
In addition to the system information
broadcasted on BCCH the SS broadcasts
SystemInformation-BR-r13,
SystemInformationBlockType1-BR-r13 and
other relevant system information blocks as
required by the specified combinations of
system information blocks specified for the
test case on BCCH-BR.
Same procedure for steps 2 to 18b1 as
specified in the procedure in clause 4.5.2.3
4.5.2AA.4
U-S
<--
-
Message Sequence
Message
RRC: SYSTEM INFORMATION (BCCH
and BCCH-BR)
-
Specific message contents
Same specific message content as in clause 4.5.2.4 with the exception below:
-
In addition to any other conditions use the condition CEmodeB if the test case specifically tests CE mode B else
use condition CEmodeA.
4.5.2AB UE Registration, UE Test Mode Activated in cell supporting BL/CE
UE (State 2A-CE)
The same assumptions and definitions apply as in clause 4.5.2.
4.5.2AB.1
Initial conditions
System Simulator:
-
1 cell, default parameters.
-
The procedure shall be performed under ideal radio conditions as defined in clause 5
User Equipment:
-
The Test USIM shall be inserted.
4.5.2AB.2
Definition of system information messages
Same system information message content as in clause 4.5.2AA.2.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.2AB.3
266
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5.2AB.3-1: UE registration procedure (state 1 to state 2A-CE)
Step
1
2 to
9a2
10 to
20b1
Procedure
In addition to the system information
broadcasted on BCCH the SS broadcasts
SystemInformation-BR-r13,
SystemInformationBlockType1-BR-r13 and
other relevant system information blocks as
required by the specified combinations of
system information blocks specified for the
test case on BCCH-BR.
Same procedure for steps 2 to 9a2 as
specified in the procedure in clause 4.5.2.3
Same procedure for steps 10 to 20b1 as
specified in the procedure in clause 4.5.2A.3
4.5.2AB.4
U-S
<--
Message Sequence
Message
RRC: SYSTEM INFORMATION (BCCH
and BCCH-BR)
-
-
-
-
Specific message contents
Same specific message content as in clause 4.5.2A.4 with the exception below:
-
In addition to any other conditions use the condition CEmodeB if the test case specifically tests CE mode B else
use condition CEmodeA.
4.5.2B
UE Registration, pre-registration on HRPD (State 2B)
The same assumptions and definitions apply as in clause 4.5.2.
4.5.2B.1
Initial conditions
System Simulator:
-
Cell 1
-
Cell 1 is transmitting SystemInformationBlockType8
User Equipment:
-
The Test USIM shall be inserted.
4.5.2B.2
Definition of system information messages
Table 4.5.2B.2-1: SystemInformationBlockType1 for cell 1 (Steps 1-41, Table 4.5.2B.3-2)
Derivation Path: 36.508 Table 4.4.3.2-3
Information Element
SystemInformationBlockType1 ::= SEQUENCE {
schedulingInformation ::= SEQUENCE (SIZE
(1..maxSI-Message)) OF SEQUENCE {}
Value/remark
Combination 6 in TS
36.508 section 4.4.3.1
}
ETSI
Comment
SIB2, SIB3 and
SIB 8 are
transmitted
Condition
3GPP TS 36.508 version 15.5.0 Release 15
267
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2B.2-2: SystemInformationBlockType8 for cell 1 (Steps 1-41, Table 4.5.2B.3-2)
Derivation Path: 36.508 Table 4.4.3.3-7, condition HRPD
Information Element
Value/remark
SystemInformationBlockType8 ::= SEQUENCE {
parametersHRPD SEQUENCE {
preRegistrationInfoHRPD SEQUENCE {
preRegistrationAllowed
TRUE
preRegistrationZoneId
ColorCode
secondaryPreRegistrationZoneIdList
Not present
SEQUENCE (SIZE (1..2)) OF SEQUENCE {
PreRegistrationZoneIdHRPD
Not present
}
}
cellReselectionParametersHRPD SEQUENCE {
bandClassList SEQUENCE (SIZE (1..maxCDMA 1 entry
-BandClass)) OF SEQUENCE {
bandClass
Band Class of frequency
under test
cellReselectionPriority
threshX-High
threshX-Low
}
neighCellList SEQUENCE (SIZE (1..16)) OF
SEQUENCE {
bandClass
}
}
t-ReselectionCDMA2000
3
30(-30)
32(-32)
ENUMERATED
{bc0, bc1, bc2,
bc3, bc4, bc5,
bc6, bc7, bc8,
bc9, bc10, bc11,
bc12, bc13, bc14,
bc15, bc16, bc17,
spare14, spare13,
spare12, spare11,
spare10, spare9,
spare8, spare7,
spare6, spare5,
spare4, spare3,
spare2, spare1,
...}
INTEGER (0..63)
INTEGER (0..63)
1 entry
Band Class of frequency
under test
ENUMERATED
{bc0, bc1, bc2,
bc3, bc4, bc5,
bc6, bc7, bc8,
bc9, bc10, bc11,
bc12, bc13, bc14,
bc15, bc16, bc17,
spare14, spare13,
spare12, spare11,
spare10, spare9,
spare8, spare7,
spare6, spare5,
spare4, spare3,
spare2, spare1,
...}
3
INTEGER (0..7)
}
}
}
4.5.2B.3
Comment
Procedure
Table 4.5.2B.3-1 shows the cell power levels during the procedure.
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
268
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2B.3-1: Time instances of cell power level and parameter changes
T0
Parameter
Cell-specific RS EPRE
Unit
dBm/15kHz
Cell 1
-75
ETSI
Remark
-
3GPP TS 36.508 version 15.5.0 Release 15
269
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2B.3-2: UE registration with HRPD pre-registration procedure (state 1 to state 2B)
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Step
1 to
16
-
17
18
19
20
21
22
23
24
25
26
27
28
29
30
30A
30B
30C
270
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Same procedure for steps 1 to 16 as specified
in the procedure in clause 4.5.2.3
EXCEPTION: IF MULTI_PDN = TRUE THEN
in parallel to the events described in steps 17
to 40 below, the generic procedure for UE
establishing additional PDN connectivity as
specified in TS 36.508 subclause 4.5A.16
takes place
The UE transmits an ULInformationTransfer
containing a tunneled UATIRequest message
Cell 1.
The SS transmits a DLInformationTransfer
containing a tunneled UATIAssignment
message on Cell 1.
The UE transmits an ULInformationTransfer
containing a tunneled UATIComplete
message on Cell 1.
The UE transmits an ULInformationTransfer
containing a tunneled
AlternateLinkOpenReqmessage on Cell 1.
The SS transmits a DLInformationTransfer
containing a tunneled
AlternateLinkOpenConfmessage on Cell 1.
The UE transmits an ULInformationTransfer
containing a tunneled
AlternateLinkOpenCompleteon Cell 1.
The UE transmits an ULInformationTransfer
containing a tunneled ConfigurationRequest
message for SCP configuration on Cell 1.
The SS transmits a DLInformationTransfer
containing a tunneled ConfigurationResponse
message for SCP configuration on Cell 1.
The UE transmits an ULInformationTransfer
containing a tunneled ConfigurationRequest
message for Stream protocol on Cell 1.
The SS transmits a DLInformationTransfer
containing a tunneled ConfigurationResponse
message for Stream protocol accepting
EMPA bound to service network on Cell 1.
The UE transmits an ULInformationTransfer
containing a tunneled EMPA
ConfigurationRequest message or MMPA
ConfigurationRequest message on Cell 1.
The SS transmits a DLInformationTransfer
containing a tunneled EMPA
ConfigurationResponse message or MMPA
ConfigurationResponse message on Cell 1.
The UE transmits an ULInformationTransfer
containing a tunneled ConfigurationComplete
message on Cell 1.
The SS transmits a DLInformationTransfer
containing a tunneled EMPA
ConfigurationRequest message or MMPA
ConfigurationRequest message on Cell 1.
The UE transmits an ULInformationTransfer
containing a tunneled EMPA
ConfigurationResponse message or MMPA
ConfigurationResponse message on Cell 1.
The SS transmits an DLInformationTransfer
containing a tunneled
SoftConfigurationComplete message on Cell
1.
The UE transmits an ULInformationTransfer
containing a tunneled AlternateLinkCloseReq
message on Cell 1.
U-S
-
Message Sequence
Message
-
-->
ULInformationTransfer
<--
DLInformationTransfer
-->
ULInformationTransfer
-->
ULInformationTransfer
<--
DLInformationTransfer
-->
ULInformationTransfer
-->
ULInformationTransfer
<--
DLInformationTransfer
-->
ULInformationTransfer
<--
DLInformationTransfer
-->
ULInformationTransfer
<--
DLInformationTransfer
-->
ULInformationTransfer
<--
DLInformationTransfer
-->
ULInformationTransfer
<--
DLInformationTransfer
-->
ULInformationTransfer
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
30D
31
32
32A
32B
32C
33
33A
34
35
36
37
38
39
39A
39B
40
41
-
The SS transmits a DLInformationTransfer
containing a tunneled AlternateLinkCloseConf
message on Cell 1.
Optionally tunneled device level
authentication may take place on Cell 1.
Optionally tunneled Location Update
procedure may take place if the SS is
configured to support it.
The UE transmits an ULInformationTransfer
containing a tunneled AlternateLinkOpenReq
message on Cell 1.
The SS transmits a DLInformationTransfer
containing a tunneled AlternateLinkOpenConf
message on Cell 1.
The UE transmits an ULInformationTransfer
containing a tunneled
AlternateLinkOpenComplete message on Cell
1.
Tunneled PPP LCP negotiation is performed
between the UE and the SS. EAP-AKA’ is
selected as the authentication protocol.
After entering PPP LCP Open State,
optionally tunneled PPP Version Capability
Indicaiton and/or Max PPP Inactivity Timer
negotiation may take place.
Tunneled EAP-AKA’ is performed between
the UE and the SS.
The UE transmits an ULInformationTransfer
containing a tunneled VSNCP ConfigureRequest message, including a PDN-ID, PDN
Type, APN, PDN Address, Protocol
Configuration Options, and Attach Type =
“handover”.
The Address Allocation Preference option
contained in the Protocol Configuration
Options indicates whether the UE wants to
perform the IP address allocation during the
attach procedure or deferred IP address
allocation. PDN Type indicates the UE’s IP
capability (IPv4, IPv6 or IPv4/v6)
The SS transmits a DLInformationTransfer
containing a tunneled VSNCP Configure-Ack
message.
The SS transmits a DLInformationTransfer
containing a tunneled VSNCP ConfigureRequest message including the PDN-ID
configuration option.
The UE transmits an ULInformationTransfer
containing a tunneled VSNCP Configure-Ack
message.
Optionally deferred IP address allocation
using tunnelled IETF messages can take
place depending on the Address Allocation
Preference indicated by the UE at Step 35.
The UE transmits an ULInformationTransfer
containing a tunneled AlternateLinkCloseReq
message on Cell 1.
The SS transmits a DLInformationTransfer
containing a tunneled AlternateLinkCloseConf
message on Cell 1.
Void
The SS transmits an RRCConnectionRelease
message on Cell 1.
EXCEPTION: Steps 42a1 to 42b1 describe
behaviour that depends on UE
capabilities/configuration; the "lower case
letter" identifies a step sequence that takes
place if one of those is supported/configured.
271
ETSI TS 136 508 V15.5.0 (2019-07)
<--
DLInformationTransfer
<-->
-
<-->
-
-->
ULInformationTransfer
<--
DLInformationTransfer
-->
ULInformationTransfer
<-->
-
<->
-
<-->
-
-->
ULInformationTransfer
<--
DLInformationTransfer
<--
DLInformationTransfer
-->
ULInformationTransfer
<-->
-->
ULInformationTransfer
<--
DLInformationTransfer
<--
RRCConnectionRelease
-
ETSI
-
3GPP TS 36.508 version 15.5.0 Release 15
272
ETSI TS 136 508 V15.5.0 (2019-07)
42a1
IF MULTI_PDN
AND
pc_UE_supports_user_initiated_PDN_discon
nect THEN
the non-IMS PDN shall be released as
specified in TS 36.508 subclause 4.5A.17
42b1 IF MULTI_PDN
AND NOT
pc_UE_supports_user_initiated_PDN_discon
nect THEN
the non-IMS PDN shall be released as
specified in TS 36.508 subclause 4.5A.18
Note 1: The sequence in steps 17-40 lists important eHRPD procedures. More protocol negotiations can
happen based on UE capability and SS emulation.
Note 2: Message contents of tunnelled CDMA2000 messages (steps 17-40) are not checked in terms of
conformance testing.
NOTE: If step 31 is performed, an alternative link establishement procedure is also performed.
4.5.2B.4
Specific message contents
All specific message contents shall be referred to clause 4.6, 4.7 and 4.7A with the exceptions below.
Table 4.5.2B.4-1: RRCConnectionRequest (Step 2, Table 4.5.2B.3-2)
Derivation Path: Table 4.6.1-16
Information Element
RRCConnectionRequest ::= SEQUENCE {
criticalExtensions CHOICE {
rrcConnectionRequest-r8 SEQUENCE {
ue-Identity
}
}
}
Value/remark
Comment
Condition
Any allowed value
Table 4.5.2B.4-2: UECapabilityInformation (Step13, Table 4.5.2B.3-2)
Derivation Path: Table 4.6.1-23
Information Element
UECapabilityInformation ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE{
ueCapabilityInformation-r8
}
}
}
Value/remark
Comment
Condition
Any allowed value
Table 4.5.2B.4-3: UATI Request message (Step 17, Table 4.5.2B.3-2)
Field
SAPState
SessionConfigurationToken
ConnectionLayerFormat
ATI Record
Reserved
MessageID
TransactionID
Value/remark
‘0’B
16 bits, Set by UE
1 bit, Set by UE
34 bits, RATI set by UE
‘0000’B
‘00000000’B
8 bits, Set by UE
ETSI
Comment
SAP Header
UATI Request
Condition
3GPP TS 36.508 version 15.5.0 Release 15
273
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2B.4-4: UATI Assignment message (Step 18, Table 4.5.2B.3-2)
Field
SAPState
SessionConfigurationToken
ConnectionLayerFormat
ATI Record
Reserved
MessageID
MessageSequence
Reserved1
SubnetIncluded
UATISubnetMask
UATI104
UATIColorCode
UATI024
UpperOldUATILength
Reserved2
4.5.2C
Value/remark
‘1’B
‘0’
1 bit, Set by SS
34 bits, RATI set in UATI
Request
‘0000’B
‘00000001’B
8 bits, Set by SS
‘0000000’B
‘1’B
‘1101000’B
104 bits, Set by SS
8 bits, Set to ColorCode
24 bits, Set by SS
‘0000’B
‘0000’B
Comment
SAP Header
Condition
UATI Assignment
UE Registration, pre-registration on 1xRTT (State 2C)
The same assumptions and definitions apply as in clause 4.5.2.
4.5.2C.1
Initial conditions
System Simulator:
-
Cell 1
-
Cell 1 is transmitting SystemInformationBlockType8
User Equipment:
-
The Test USIM shall be inserted.
-
The UE is switched OFF.
4.5.2C.2
Definition of system information messages
Table 4.5.2C.2-1: SystemInformationBlockType1 for cell 1 (Steps 1-19, Table 4.5.2C.3-2)
Derivation Path: 36.508 Table 4.4.3.2-3
Information Element
SystemInformationBlockType1 ::= SEQUENCE {
schedulingInformation ::= SEQUENCE (SIZE
(1..maxSI-Message)) OF SEQUENCE {}
Value/remark
Combination 6 in TS
36.508 section 4.4.3.1
}
ETSI
Comment
SIB2, SIB3 and
SIB 8 are
transmitted
Condition
3GPP TS 36.508 version 15.5.0 Release 15
274
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2C.2-2: SystemInformationBlockType8 for cell 1 (Steps 1-19, Table 4.5.2C.3-2)
Derivation Path: 36.508 Table 4.4.3.3-7, condition 1XRTT
Information Element
Value/remark
SystemInformationBlockType8 ::= SEQUENCE {
parameters1XRTT SEQUENCE {
csfb-RegistrationParam1XRTT SEQUENCE {
Sid
SID under test
For Signalling test cases,
see table 4.4.2-4
Nid
NID under test
For Signalling test cases,
see table 4.4.2-4
multipleSID
TRUE
multipleNID
TRUE
homeReg
TRUE
foreignSIDReg
TRUE
foreignNIDReg
TRUE
parameterReg
TRUE
powerUpReg
TRUE
registrationPeriod
’0000000’
registrationZone
totalZone
Registration zone under
test
For Signalling test cases,
see table 4.4.2-4
'001'B
zoneTimer
'000'B or '001'B
}
longCodeState1XRTT
cellReselectionParameters1XRTT SEQUENCE {
bandClassList SEQUENCE (SIZE (1..maxCDMA
-BandClass)) OF SEQUENCE {
bandClass
cellReselectionPriority
threshX-High
threshX-Low
}
}
csfb-RegistrationParam1XRTT-v920{
powerDownReg-r9
}
}
A valid value, calculated
and updated by the SS
Comment
BIT STRING
(SIZE (15))
BIT STRING
(SIZE (16))
BOOLEAN
BOOLEAN
BOOLEAN
BOOLEAN
BOOLEAN
BOOLEAN
BOOLEAN
BIT STRING
(SIZE (7))
BIT STRING
(SIZE (12))
BIT STRING
(SIZE (3))
BIT STRING
(SIZE (3))
BIT STRING
(SIZE (42))
OPTIONAL
1 entry
Band Class of frequency
under test
3
30(-30)
32(-32)
TRUE
}
ETSI
ENUMERATED
{bc0, bc1, bc2,
bc3, bc4, bc5,
bc6, bc7, bc8,
bc9, bc10, bc11,
bc12, bc13, bc14,
bc15, bc16, bc17,
spare14, spare13,
spare12, spare11,
spare10, spare9,
spare8, spare7,
spare6, spare5,
spare4, spare3,
spare2, spare1,
...}
INTEGER (0..63)
INTEGER (0..63)
Condition
3GPP TS 36.508 version 15.5.0 Release 15
4.5.2C.3
275
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5.2C.3-1 shows the cell power levels after the preamble.
Table 4.5.2C.3-1: Time instances of cell power level and parameter changes
Parameter
Cell-specific RS EPRE
T0
Unit
dBm/15kHz
Cell 1
-60
Remark
-
Table 4.5.2C.3-2: UE registration with 1xRTT pre-registration procedure (state 1 to state 2C)
Step
Procedure
U-S
-
1 to
16
-
Message Sequence
Message
Same procedure for steps 1 to 16 as specified
in the procedure in clause 4.5.2.3
EXCEPTION: IF MULTI_PDN = TRUE THEN
in parallel to the events described in steps
16A to 18 below, the generic procedure for
UE establishing additional PDN connectivity
as specified in TS 36.508 subclause 4.5A.16
takes place
CSFBParametersRequestCDMA2000
16A
The UE transmits a
-->
CSFBParametersRequestCDMA2000 on Cell
1?
CSFBParametersResponseCDMA2000
16B
The SS transmits a
<-CSFBParametersResponseCDMA2000 on
Cell 1.
The UE transmits an ULInformationTransfer
ULInformationTransfer
17
-->
containing a 1xRTT GCSNA Encapsulated
Registration message on Cell 1.
DLInformationTransfer
17A
The SS transmits a DLInformationTransfer
<-containing a GCSNA Ack message on Cell 1.
The SS transmits a DLInformationTransfer
DLInformationTransfer
18
<-containing a 1x RTT GCSNA Encapsulated
Registration Accept Order on Cell 1.
The SS transmits an RRCConnectionRelease
RRCConnectionRelease
19
<-message on Cell 1.
EXCEPTION: Steps 20a1 to 20b1 describe
behaviour that depends on UE
capabilities/configuration; the "lower case
letter" identifies a step sequence that takes
place if one of those is supported/configured.
20a1 IF MULTI_PDN
AND
pc_UE_supports_user_initiated_PDN_discon
nect THEN
the non-IMS PDN shall be released as
specified in TS 36.508 subclause 4.5A.17
20b1 IF MULTI_PDN
AND NOT
pc_UE_supports_user_initiated_PDN_discon
nect THEN
the non-IMS PDN shall be released as
specified in TS 36.508 subclause 4.5A.18
Note: Message contents of tunnelled CDMA2000 messages (steps 17-18) are not checked in terms of
conformance testing.
Table 4.5.2C.3-3: Void
4.5.2C.4
Specific message contents
All specific message contents shall be referred to clause 4.6, 4.7 and 4.7A with the exceptions below.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
276
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2C.4-1: RRCConnectionRequest (Step 2, Table 4.5.2C.3-2)
Derivation Path: Table 4.6.1-16
Information Element
RRCConnectionRequest ::= SEQUENCE {
criticalExtensions CHOICE {
rrcConnectionRequest-r8 SEQUENCE {
ue-Identity
}
}
}
Value/remark
Comment
Condition
Any allowed value
Table 4.5.2C.4-2: UECapabilityInformation (Step 13, Table 4.5.2C.3-2)
Derivation Path: Table 4.6.1-23
Information Element
UECapabilityInformation ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE{
ueCapabilityInformation-r8
}
}
}
Value/remark
Comment
Condition
Any allowed value
Table 4.5.2C.4-3: Void
Table 4.5.2C.4-4: Void
Table 4.5.2C.4-5: CSFBParametersResponseCDMA2000 (Step 16B, Table 4.5.2C.3-2)
Derivation Path: 36.508 Table 4.6.1-2
Information Element
CSFBParametersResponseCDMA2000 ::=
SEQUENCE {
criticalExtensions CHOICE {
csfbParametersResponseCDMA2000-r8
SEQUENCE {
Rand
mobilityParameters
Value/remark
Random Challenge Data
set by SS
Set according to Table
4.5.2C.4-6
}
}
}
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
277
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2C.4-6: mobilityParameters (CDMA2000Parameters) (Step 16B, Table 4.5.2C.3-2)
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Information Element
RecordType
SIDIncluded
SID
NIDIncluded
NID
REG_ZONEIncluded
REG_ZONE
TOTAL_ZONESIncluded
TOTAL_ZONES
ZONE_TIMERIncluded
ZONE_TIMER
PACKET_ZONE_IDIncluded
PACKET_ZONE_ID
PZIDHystParametersIncluded
PZ_HYST_ENABLED
PZ_HYST_INFO_INCL
PZ_HYST_LIST_LEN
PZ_HYST_ACT_TIMER
PZ_HYST_TIMER_MUL
PZ_HYST_TIMER_EXP
P_REVIncluded
P_REV
MIN_P_REVIncluded
MIN_P_REV
‘0’B NEG_SLOT_CYCLE_INDEX_SUPIncluded
NEG_SLOT_CYCLE_INDEX_SUP
ENCRYPT_MODEIncluded
ENCRYPT_MODE
ENC_SUPPORTEDIncluded
ENC_SUPPORTED
SIG_ENCRYPT_SUPIncluded
SIG_ENCRYPT_SUP
MSG_INTEGRITY_SUPIncluded
MSG_INTEGRITY_SUP
SIG_INTEGRITY_SUP_INCLIncluded
SIG_INTEGRITY_SUP_INCL
SIG_INTEGRITY_SUPIncluded
SIG_INTEGRITY_SUP
AUTHIncluded
AUTH
MAX_NUM_ALT_SOIncluded
MAX_NUM_ALT_SO
USE_SYNC_IDIncluded
USE_SYNC_ID
MS_INIT_POS_LOC_SUP_INDIncluded
MS_INIT_POS_LOC_SUP_IND
MOB_QOSIncluded
MOB_QOS
BAND_CLASS_INFO_REQIncluded
BAND_CLASS_INFO_REQ
BAND_CLASSIncluded
BAND_CLASS
BYPASS_REG_INDIncluded
BYPASS_REG_IND
‘0’B ALT_BAND_CLASSIncluded
ALT_BAND_CLASS
MAX_ADD_SERV_INSTANCEIncluded
MAX_ADD_SERV_INSTANCE
HOME_REGIncluded
HOME_REG
FOR_SID_REGIncluded
FOR_SID_REG
FOR_NID_REGIncluded
FOR_NID_REG
278
Value/remark
‘00000000’B
‘1’B
The same as SIB8
‘1’B
The same as SIB8
‘1’B
The same as SIB8
‘1’B
The same as SIB8
‘1’B
The same as SIB8
‘0’B
Not present
‘0’B
Not present
Not present
Not present
Not present
Not present
Not present
‘1’B
’00000110’B
‘1’B
’00000110’B
Not present
‘0’B
Not present
‘0’B
Not present
‘0’B
Not present
‘0’B
Not present
‘0’B
Not present
‘0’B
Not present
‘1’B
‘00’B
‘1’B
‘000’B
‘0’B
Not present
‘0’B
Not present
‘0’B
Not present
‘0’B
Not present
‘1’B
‘00000’B
‘0’B
Not present
Not present
‘0’B
Not present
‘1’B
The same as SIB8
‘1’B
The same as SIB8
‘1’B
The same as SIB8
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
POWER_UP_REGIncluded
POWER_UP_REG
POWER_DOWN_REGIncluded
POWER_DOWN_REG
PARAMETER_REGIncluded
PARAMETER_REG
REG_PRDIncluded
REG_PRD
REG_DISTIncluded
REG_DIST
PREF_MSID_TYPEIncluded
PREF_MSID_TYPE
EXT_PREF_MSID_TYPEIncluded
EXT_PREF_MSID_TYPE
MEID_REQDIncluded
MEID_REQD
MCCIncluded
MCC
IMSI_11_12Included
IMSI_11_12
IMSI_T_SUPPORTEDIncluded
IMSI_T_SUPPORTED
RECONNECT_MSG_INDIncluded
RECONNECT_MSG_IND
RER_MODE_SUPPORTEDIncluded
RER_MODE_SUPPORTED
TKZ_MODE_SUPPORTEDIncluded
TKZ_MODE_SUPPORTED
TKZ_IDIncluded
TKZ_ID
PILOT_REPORTIncluded PILOT_REPORT
PILOT_REPORT
SDB_SUPPORTEDIncluded
SDB_SUPPORTED
AUTO_FCSO_ALLOWEDIncluded
AUTO_FCSO_ALLOWED
SDB_IN_RCNM_INDIncluded
SDB_IN_RCNM_IND
FPC_FCH_Included
FPC_FCH_INIT_SETPT_RC3
FPC_FCH_INIT_SETPT_RC4
FPC_FCH_INIT_SETPT_RC5
FPC_FCH_INIT_SETPT_RC11
FPC_FCH_INIT_SETPT_RC12
T_ADD_Included
T_ADD
PILOT_INC_Included
PILOT_INC
RAND_Included
RAND
LP_SEC_Included
LP_SEC
LTM_OFF_Included
LTM_OFF
DAYLT_Included
DAYLT
GCSNAL2AckTimer_Included
GCSNAL2AckTimer
GCSNASequenceContextTimer_Incl
uded
GCSNASequenceContextTimer
279
‘1’B
The same as SIB8
‘1’B
The same as SIB8
‘1’B
The same as SIB8
‘1’B
The same as SIB8
‘0’B
Not present
‘1’B
’11’B
‘0’B
Not present
‘0’B
Not present
‘1’B
See the Table 4.4.2-4
Note 1, Note 2
‘1’B
See the Table 4.4.2-4
Note 1, Note 2
‘1’B
’0’B
‘0’B
Not present
‘0’B
Not present
‘0’B
Not present
‘0’B
Not present
‘0’B
Not present
‘0’B
Not present
‘0’B
Not present
‘0’B
Not present
‘1’B
’00011000’B
’00011000’B
’00011000’B
’00000000’B
’00000000’B
‘0’B
Not present
‘1’B
’0010’B
‘0’B
Not present
‘1’B
‘00000000’B
‘1’B
‘000000’B
‘1’B
‘0’B
‘1’B
‘00000001’B
‘1’B
‘00000101’B
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
280
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2C.4-7: ULInformationTransfer (Step 17, Table 4.5.2C.3-2)
Derivation Path: 36.508 Table 4.6.1-25
Information Element
ULInformationTransfer ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE {
ulInformationTransfer-r8 SEQUENCE {
dedicatedInformationType CHOICE {
dedicatedInfoCDMA2000-1XRTT
Value/remark
Comment
Condition
Set according to Table
4.5.2C.4-8
}
}
}
}
}
Table 4.5.2C.4-8: 1xRTT GCSNA Encapsulated Registration message (Step 17, Table 4.5.2C.3-2)
MessageID
Information Element
Value/remark
‘00000001’B
GCSNAOption
AlternativeGCSNAOption_INCL
IWSIDIncl
AckRequired
StopDupDetect
MessageSequence
NumTLACEncapsulated1xL3PDU
Reserved
1xLogicalChannel
1xProtocolRevision
MsgType
‘00000001’B
‘0’B
‘0’B
‘1’B
‘0’B
Set by UE
‘00’B
‘0000’B
‘0’B
’00000110’B
‘00000001’B
NumTLACHeaderRecords
TLACHeaderRecordType
TLACHeaderRecordLength
MSID_TYPE
MSID_LEN
MSID
Reserved
1xL3PDULength
REG_TYPE
‘0001’B
‘0000’B
8 bits, Set by UE
‘011’B
4 bits, Set by UE
Variable, Set by UE
‘0000000’B
16 bits, Set by UE
‘0001’B
SLOT_CYCLE_INDEX
MOB_P_REV
SCM
MOB_TERM
RETURN_CAUSE
QPCH_SUPPORTED
ENHANCED_RC
UZID_INCL
‘010’B
8 bits, Set by UE
8 bits, Set by UE
‘1’B
‘1’B
‘1’B
‘1’B
‘0’B
ETSI
Comment
GCSNA1xCircuitS
ervice message
Registration
message
Power up
registration
Condition
3GPP TS 36.508 version 15.5.0 Release 15
281
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2C.4-9: 1xRTT CS Registration Accept Order (Step 18, Table 4.5.2C.3-2)
Information Element
MessageID
GCSNAOption
AlternativeGCSNAOption_INCL
IWSIDIncl
AckRequired
StopDupDetect
MessageSequence
NumTLACEncapsulated1xL3PDU
Reserved
1xLogicalChannel
1xProtocolRevision
MsgType
NumTLACHeaderRecords
Reserved
1xL3PDULength
ORDER
Value/remark
‘00000001’B
‘00000001’B
‘0’B
‘0’B
‘0’B
‘0’B
6 bits, Set by SS
‘00’B
‘0000’B
‘0’B
’00000110’B
‘00000111’B
‘0000’B
‘000’B
16 bits, Set by SS
‘011011’B
ADD_RECORD_LEN
ORDQ
‘001’B
‘00000000’B
Comment
Condition
Order message
Registration
Accept Order
Table 4.5.2C.4-10: ATTACH ACCEPT (Step 14, Table 4.5.2C.3-2)
Derivation Path: 36.508 clause 4.7.2
Information Element
EPS attach result
EMM cause
4.5.2D
Value/remark
'0001'B
'0001 0010'B
Comment
EPS only
#18 “CS domain
not available”
Condition
combined_E
PS_IMSI
UE Registration, 2 PDN for RAN Assisted WLAN Interworking (State
2)
The same assumptions and definitions apply as in clause 4.5.2.
4.5.2D.1
Initial conditions
System Simulator:
-
1 cell, default parameters.
-
The procedure shall be performed under ideal radio conditions as defined in clause 5
User Equipment:
-
The Test UICC shall be inserted. This shall contain either ISIM and USIM applications or only a USIM
application on UICC.
4.5.2D.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.2D.3
282
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5.2D.3-1: UE registration procedure (state 1 to state 2)
Step
Procedure
U-S
-
1-16
Message Sequence
Message
Steps 1 to 16 of the generic test procedure for
UE registration sub clause 4.5.2.3.
EXCEPTION: Step17 depends on UE
configuration, executed if UE does not
automatically trigger additional PDN
Connection.
17
Cause the UE to request connectivity to an
additional PDN (see Note 1)
18The generic procedure for UE establishing
21
additional PDN connectivity as specified in TS
36.508 subclause 4.5A.16 takes place
The SS transmits an RRCConnectionRelease
RRC: RRCConnectionRelease
22
<-message to release RRC connection and
move to RRC_IDLE (State 2).
NOTE 1: The request of connectivity to an additional PDN may be performed by MMI or AT command.
4.5.2D.4
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7 with the exceptions below.
Table 4.5.2D.4-1: RRCConnectionRequest (Step 2)
Derivation Path: Table 4.6.1-16
Information Element
RRCConnectionRequest ::= SEQUENCE {
criticalExtensions CHOICE {
rrcConnectionRequest-r8 SEQUENCE {
ue-Identity
}
}
}
Value/remark
Comment
Condition
Any allowed value
Table 4.5.2D.4-2: UECapabilityInformation (Step 13)
Derivation Path: Table 4.6.1-23
Information Element
UECapabilityInformation ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE{
ueCapabilityInformation-r8
}
}
}
Value/remark
Any allowed value
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
283
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2D.4-3: ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST (Step 14 a)
Derivation Path: Table 4.7.3-6 with condition IMS_PDN_ConnEstab for PDN1_IMS and NOT IMS_PDN_ConnEstab
else
Information Element
Value/remark
Comment
Condition
EPS bearer identity
'0101'B
arbitrary value
PDN1_IMS
used for PDN
OR NOT
connectivity being MULTI_PDN
maintained during
the test case
EPS bearer identity
'1100'B
arbitrary value
MULTI_PDN
used for additional AND NOT
PDN connectivity
PDN1_IMS
which may be
released before
entering the test
procedure of the
test case
PDN address
IPv4_addres
s_only
Length of PDN address contents
5 octets
PDN type value
‘001’B
IPv4
PDN address information
IPv4 address
The SS provides a NOT IPv4valid IPv4 address DHCP
0.0.0.0
DHCPv4 is to be
IPv4-DHCP
used to allocate
the IPv4 address
ESM cause
IF "PDN type" IE in step
"PDN type IPv4
4 is 'IPv4v6' THEN
only allowed"
'00110010'B ELSE Not
present
WLAN offload indication
Not present
NOT
PDN1_Offlo
ad
WLAN offload indication
PDN1_Offlo
ad
WLAN offload acceptability
‘0001’B
Offloading the
traffic of the PDN
connection via a
WLAN when in S1
mode is
acceptable
NOTE:
The default message contents specified in table 4.7.3-6 apply unless the condition IPv4_address_only in
table 4.5.2D.4-3 is true.
Condition
IPv4_address_only
IPv4-DHCP
Explanation
This condition applies if the test case preamble description indicates that the UE is
allocated an IPv4 address.
If in the last PDN CONNECTIVITY REQUEST or ESM INFORMATION RESPONSE sent
prior to this message, the IE Protocol configuration options contains a configuration
protocol option = '000B00H' ("IPv4 address allocation via DHCPv4", length of contents = 0).
Note 1:
This condition is used in conjunction with IPv4 or IPv4v6 as indicated in the
"PDN address row" just above.
Note 2:
PDN1_Offload
If both messages, PDN CONNECTIVITY REQUEST and ESM INFORMATION
RESPONSE, are received and contain a Protocol configuration options IE then
the IE from the message which is received later shall be used.
This condition applies if the test execution requests the first PDN connection PDN1 to be
offloaded to WLAN
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
284
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.2D.4-4: Message ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST (step 19)
Derivation path:
Table 4.7.3-6 with condition IMS_PDN_ConnEstab for ADD_IMS and NOT IMS_PDN_ConnEstab else and
table 4.6.1-8 with condition AM-DRB-ADD(1) for ADD_IMS or with condition AM-DRB-ADD(8) else
Information Element
Value/Remark
Comment
Condition
EPS bearer identity
'0101'B
arbitrary value
PDN2_IMS
used for PDN
connectivity being
maintained during
the test case
EPS bearer identity
'1100'B
arbitrary value
NOT
used for additional PDN2_IMS
non-IMS PDN
connectivity
Procedure transaction identity
PTI-1
SS re-uses the
particular PTI
defined by UE for
this present
additional PDN
connectivity
request procedure
WLAN offload indication
Not present
PDN1_Offl
oad
WLAN offload indication
NOT
PDN1_Offl
oad
WLAN offload acceptability
‘0001’B
Offloading the
traffic of the PDN
connection via a
WLAN when in S1
mode is
acceptable
Condition
PDN1_Offload
4.5.3
Explanation
This condition applies if the test execution requests the first PDN connection PDN1 to be
offloaded to WLAN
Generic Radio Bearer Establishment (State 3)
IF pc_ue_CategoryDL_M1 THEN use the procedure for State 3-CE according to clause 4.5.3AA ELSE use the
procedure defined in the present clause.
NOTE:
The statement to use alternate procedure for CAT M1 UE (pc_ue_CategoryDL_M1 is set) is to enable
LTE legacy protocol test cases to be used for CAT M1 UE testing. Any CAT M1 or CE specific test cases
should not rely on this statement, but refer directly to the relevant CE specific state.
4.5.3.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2).
4.5.3.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.3.3
285
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
The establishment of generic radio bearer connection is assumed to always be mobile terminated.
Table 4.5.3.3-1: Generic Radio Bearer establishment procedure (state 2 to state 3)
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Step
286
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Message Sequence
Message
U-S
1
2
3
4
5
6
7
8
9
10a1
10a2
10a3
Void
SS sends a Paging message to the UE on the
appropriate paging block, and including the
UE identity in one entry of the IE
pagingRecordLists.
UE transmits an RRCConnectionRequest
message.
SS transmit an RRCConnectionSetup
message.
The UE transmits an
RRCConnectionSetupComplete message to
confirm the successful completion of the
connection establishment and to initiate the
session management procedure by including
the SERVICE REQUEST message. (State3)
The SS transmits a SecurityModeCommand
message to activate AS security.
The UE transmits a SecurityModeComplete
message and establishes the initial security
configuration.
The SS configures a new data radio bearer,
associated with the default EPS bearer
context.
IF the test case using state 3 as an initial
state is using N additional data radio bearers
(0 ≤ N ≤ 7), the
RRCConnectionReconfiguration message
contains the configuration of these additional
data radio bearers in the drb-ToAddModify IE
and one ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message per
additional data radio bearer.
The RRCConnectionReconfiguration
message is using condition SRB2-DRB(1+n,
m) where n and m are the number of DRBs
associated with dedicated EPS bearer
contexts and configured respectively with
RLC-AM and RLC-UM (n+m = N).
EXCEPTION: the steps 9 and 10a1 to 10a3 (if
present) happen in any order.
The UE transmits an
RRCConnectionReconfigurationComplete
message to confirm the establishment of the
new data radio bearer, associated with the
default EPS bearer context.
IF N ≥ 1 (see step 8), the UE transmits an
ACTIVATE DEDICATED EPS BEARER
CONTEXT ACCEPT message matching with
the 1st ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message
included in step 8.
IF N ≥ 2 (see step 8), the UE transmits an
ACTIVATE DEDICATED EPS BEARER
CONTEXT ACCEPT message matching with
the 2nd ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message
included in step 8.
IF N ≥ 3 (see step 8), the UE transmits an
ACTIVATE DEDICATED EPS BEARER
CONTEXT ACCEPT message matching with
the 3rd ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message
included in step 8.
<--
RRC: Paging (PCCH)
-->
RRC: RRCConnectionRequest
<--
RRC: RRCConnectionSetup
-->
RRC: RRCConnectionSetupComplete
NAS: SERVICE REQUEST
<--
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
...
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
-
-
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
RRC: ULInformationTransfer
NAS: ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
-->
RRC: ULInformationTransfer
NAS: ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
-->
RRC: ULInformationTransfer
NAS: ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
IF N ≥ 4 (see step 8), the UE transmits an
ACTIVATE DEDICATED EPS BEARER
CONTEXT ACCEPT message matching with
the 4th ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message
included in step 8.
IF N ≥ 5 (see step 8), the UE transmits an
ACTIVATE DEDICATED EPS BEARER
CONTEXT ACCEPT message matching with
the 5th ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message
included in step 8.
IF N ≥ 6 (see step 8), the UE transmits an
ACTIVATE DEDICATED EPS BEARER
CONTEXT ACCEPT message matching with
the 6th ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message
included in step 8.
IF N = 7 (see step 8), the UE transmits an
ACTIVATE DEDICATED EPS BEARER
CONTEXT ACCEPT message matching with
the 7th ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message
included in step 8.
10a4
10a5
10a6
10a7
4.5.3.4
287
ETSI TS 136 508 V15.5.0 (2019-07)
-->
RRC: ULInformationTransfer
NAS: ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
-->
RRC: ULInformationTransfer
NAS: ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
-->
RRC: ULInformationTransfer
NAS: ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
-->
RRC: ULInformationTransfer
NAS: ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7.
4.5.3A
Generic Radio Bearer Establishment, UE Test Mode Activated
(State 3A)
IF pc_ue_CategoryDL_M1 THEN use the procedure for State 3A-CE according to clause 4.5.3AB ELSE use the
procedure defined in the present clause.
NOTE:
The statement to use alternate procedure for CAT M1 UE (pc_ue_CategoryDL_M1 is set) is to enable
LTE legacy protocol test cases to be used for CAT M1 UE testing. Any CAT M1 or CE specific test cases
should not rely on this statement, but refer directly to the relevant CE specific state.
4.5.3A.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state, UE Test Mode Activated (State 2A for Signalling testing).
-
The UE shall be in Registered, Idle Mode state, UE Test Mode Activated (State 2A-RF for RF and RRM
testing).
-
The UE shall be in Registered, Idle Mode state, UE Test Mode Activated (State 2A or State 2A-RF for UE
positioning testing).
4.5.3A.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.3A.3
288
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Same procedure as specified in the procedure in clause 4.5.3.3.
4.5.3A.4
Specific message contents
All specific message contents shall be referred to clause 4.6, 4.7 and 4.7A.
4.5.3AA Generic Radio Bearer Establishment (State 3-CE)
4.5.3AA.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2-CE).
4.5.3AA.2
Definition of system information messages
The default system information messages as specified in clause 4.5.2AA.2.
4.5.3AA.3
Procedure
Table 4.5.3AA.3-1: UE registration procedure (state 2-CE to state 3-CE)
Step
Procedure
Message Sequence
Message
U-S
1
2 to
10a7
Void
Same procedure for steps 2 to 10a7 as
specified in the procedure in clause 4.5.3.3.
4.5.3AA.4
-
-
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7 with the exception below:
-
In addition to any other conditions use the condition CEmodeB if the test case specifically tests CE mode B else
use condition CEmodeA.
4.5.3AB Generic Radio Bearer Establishment, UE Test Mode Activated
(State 3A-CE)
4.5.3AB.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state, UE Test Mode Activated (State 2A-CE for Signalling testing).
-
The UE shall be in Registered, Idle Mode state, UE Test Mode Activated (State 2A-RF-CE for RF and RRM
testing).
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.3AB.2
289
ETSI TS 136 508 V15.5.0 (2019-07)
Definition of system information messages
The default system information messages are used as specified in clause 4.5.2AA.2.
4.5.3AB.3
Procedure
Table 4.5.3AB.3-1: UE registration procedure (State 2A-CE/2A-RF-CE to state 3A-CE)
Step
Procedure
Message Sequence
Message
U-S
1
2 to
10a7
Void
Same procedure for steps 2 to 10a7 as
specified in the procedure in clause 4.5.3.3
4.5.3AB.4
-
-
Specific message contents
All specific message contents shall be referred to clause 4.6, 4.7 and 4.7A with the exception below:
-
In addition to any other conditions use the condition CEmodeB if the test case specifically tests CE mode B else
use condition CEmodeA.
4.5.3B
Generic Radio Bearer Establishment, pre-registered on HRPD
(State 3B)
4.5.3B.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state, pre-registered on HRPD (State 2B).
4.5.3B.2
Definition of system information messages
The default system information messages are used.
4.5.3B.3
Procedure
Same procedure as specified in the procedure in clause 4.5.3.3.
4.5.3B.4
Specific message contents
All specific message contents shall be referred to clause 4.6, 4.7 and 4.7A.
4.5.3C
Generic Radio Bearer Establishment, pre-registered on 1xRTT
(State 3C)
4.5.3C.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
290
ETSI TS 136 508 V15.5.0 (2019-07)
The UE shall be in Registered, Idle Mode state, pre-registered on 1xRTT (State 2C).
4.5.3C.2
Definition of system information messages
The default system information messages are used.
4.5.3C.3
Procedure
Same procedure as specified in the procedure in clause 4.5.3.3.
4.5.3C.4
Specific message contents
All specific message contents shall be referred to clause 4.6, 4.7 and 4.7A.
4.5.3D
Generic Radio Bearer Establishment for RAN Assisted WLAN
Interworking (State 3)
4.5.3D.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2) as per 4.5.2D establishing 2 PDN connections.
4.5.3D.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.3D.3
291
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
The establishment of generic radio bearer connection is assumed to always be mobile terminated.
Table 4.5.3D.3-1: Generic Radio Bearer establishment procedure (state 2 to state 3)
Step
1-7
8
910a7
Procedure
Steps 1 to 16 of the generic test procedure for
Radio Bearer Establishment sub clause
4.5.3.3
The SS configures a 2 new data radio bearer,
associated with the 2 default EPS bearer
contexts.
IF the test case using state 3 as an initial
state is using N additional data radio bearers
(0 ≤ N ≤ 7), the
RRCConnectionReconfiguration message
contains the configuration of these additional
data radio bearers in the drb-ToAddModify IE
and one ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message per
additional data radio bearer.
The RRCConnectionReconfiguration
message is using condition SRB2-DRB(1+n,
m) where n and m are the number of DRBs
associated with dedicated EPS bearer
contexts and configured respectively with
RLC-AM and RLC-UM (n+m = N).
Steps 9 to 10a7 of the generic test procedure
for Radio Bearer Establishment sub clause
4.5.3.3
4.5.3D.4
U-S
-
<--
-
Message Sequence
Message
-
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
...
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
-
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7.
4.5.3E
Control plane CIoT connection request (State 3-CP)
4.5.3E.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
-
TS 36.508 condition CIoT-test apply.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2 or 2-CE).
4.5.3E.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.3E.3
292
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
The establishment of generic radio bearer connection is assumed to always be mobile terminated.
Table 4.5.3E.3-1: Generic control plane CIoT connection request procedure (state 3-CP)
Step
Procedure
Message Sequence
Message
U-S
1
2
3
4
5
6
Void
SS sends a Paging message to the UE on the
appropriate paging block, and including the
UE identity in one entry of the IE
pagingRecordLists.
UE transmits an RRCConnectionRequest
message.
SS transmit an RRCConnectionSetup
message.
The UE transmits an
RRCConnectionSetupComplete message to
confirm the successful completion of the
connection establishment and to initiate the
session management procedure by including
the CONTROL PLANE SERVICE REQUEST
message.
The SS transmits a SERVICE ACCEPT
message.
4.5.3E.4
<--
RRC: Paging (PCCH)
-->
RRC: RRCConnectionRequest
<--
RRC: RRCConnectionSetup
-->
RRC: RRCConnectionSetupComplete
NAS: CONTROL PLANE SERVICE
REQUEST
<--
RRC: DLInformationTransfer
NAS: SERVICE ACCEPT
Specific message contents
All specific message contents shall be referred to clauses 4.6 and 4.7.
4.5.3EA Control plane CIoT connection request, UE Test Mode Activated
(State 3A-CP)
4.5.3EA.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
-
TS 36.508 condition CIoT-test apply.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2A or 2A-CE).
4.5.3EA.2
Definition of system information messages
The default system information messages are used.
4.5.3EA.3
Procedure
Same procedure as specified in the procedure in clause 4.5.3E.3.
4.5.3EA.4
Specific message contents
All specific message contents shall be referred to clauses 4.6 and 4.7.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.3F
293
ETSI TS 136 508 V15.5.0 (2019-07)
User plane CIoT connection request (State 3-UP)
4.5.3F.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
-
TS 36.508 conditions CIoT-test and UP-CIoT applies.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2 or 2-CE).
4.5.3F.2
Definition of system information messages
The default system information messages are used.
4.5.3F.3
Procedure
The establishment of generic radio bearer connection is assumed to always be mobile terminated.
Table 4.5.3F.3-1: Generic user plane CIoT connection request procedure (state 3-UP)
Step
Procedure
Message Sequence
Message
U-S
1
2
3
4
5
Void
SS sends a Paging message to the UE on the
appropriate paging block, and including the
UE identity in one entry of the IE
pagingRecordLists.
UE transmits an
RRCConnectionResumeRequest message.
SS transmit an RRCConnectionResume
message.
The UE transmits an
RRCConnectionResumeComplete message.
4.5.3F.4
<--
RRC: Paging (PCCH)
-->
RRC: RRCConnectionResumeRequest
<--->
RRC: RRCConnectionResume
RRC: RRCConnectionResumeComplete
Specific message contents
All specific message contents shall be referred to clauses 4.6 and 4.7.
4.5.3FA User plane CIoT connection request, UE Test Mode Activated (State
3A-UP)
4.5.3FA.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
-
TS 36.508 conditions CIoT-test and UP-CIoT applies.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2 or 2-CE).
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.3FA.2
294
ETSI TS 136 508 V15.5.0 (2019-07)
Definition of system information messages
The default system information messages are used.
4.5.3FA.3
Procedure
Same procedure as specified in the procedure in clause 4.5.3F.3.
4.5.3FA.4
Specific message contents
All specific message contents shall be referred to clauses 4.6 and 4.7.
4.5.4
Loopback Activation (State 4)
IF pc_ue_CategoryDL_M1 THEN use the procedure for State 4-CE according to clause 4.5.4A ELSE use the procedure
defined in the present clause.
NOTE:
The statement to use alternate procedure for CAT M1 UE (pc_ue_CategoryDL_M1 is set) is to enable
LTE legacy protocol test cases to be used for CAT M1 UE testing. Any CAT M1 or CE specific test cases
should not rely on this statement, but refer directly to the relevant CE specific state.
4.5.4.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Generic RB Establishment state, UE Test Mode Activated (State 3A).
4.5.4.2
Definition of system information messages
The default system information messages are used.
4.5.4.3
Procedure
Table 4.5: 4.3-1: Loopback activation procedure (state 3A to state 4)
Step
Procedure
1
The SS transmits a CLOSE UE TEST LOOP
message to enter the UE test loop mode.
The UE transmits a CLOSE UE TEST LOOP
COMPLETE message to confirm that loopback
entities for the radio bearer(s) have been
created and loop back is activated (State 4).
2
4.5.4.4
Direction
UE - SS
<--->
Message Sequence
Message
RRC: DLInformationTransfer
TC: CLOSE UE TEST LOOP
RRC: ULInformationTransfer
TC: CLOSE UE TEST LOOP
COMPLETE
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7A.
4.5.4A
4.5.4A.1
Loopback Activation in cell supporting BL/CE UE (State 4-CE)
Initial conditions
System Simulator:
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
295
ETSI TS 136 508 V15.5.0 (2019-07)
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Generic RB Established, UE Test Mode Activated, Cell supporting BL/CE UE, UE Test
Mode Activated (State 3A-CE).
4.5.4A.2
Definition of system information messages
Same system information message content as in clause 4.5.2AA.2.
4.5.4A.3
Procedure
Table 4.5.4A.3-1: Loopback activation procedure (state 2A-CE to state 4-CE)
Step
Procedure
1
The SS transmits a CLOSE UE TEST LOOP
message to enter the UE test loop mode.
The UE transmits a CLOSE UE TEST LOOP
COMPLETE message to confirm that loopback
entities for the radio bearer(s) have been
created and loop back is activated (State 4).
2
4.5.4A.4
Direction
UE - SS
<--->
Message Sequence
Message
RRC: DLInformationTransfer
TC: CLOSE UE TEST LOOP
RRC: ULInformationTransfer
TC: CLOSE UE TEST LOOP
COMPLETE
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7A.
4.5.4B
Loopback Activation user plane (State 4A-UP)
4.5.4B.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
-
TS 36.508 conditions CIoT-test and UP-CIoT applies.
User Equipment:
-
User plane CIoT connection request, UE Test Mode Activated (State 3A-UP).
4.5.4B.2
Definition of system information messages
The default system information messages are used.
4.5.4B.3
Procedure
Same procedure as specified in the procedure in clause 4.5.4A.3.
4.5.4B.4
Specific message contents
All specific message contents shall be referred to clauses 4.6 and 4.7.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.5
296
ETSI TS 136 508 V15.5.0 (2019-07)
HRPD registration (State H2)
Editor's note: The default parameter and system information will depend on progress in Clause 4.4, once it is
finalised RAN5 can refer to them accordingly.
4.5.5.1
Initial conditions
System Simulator:
-
Cell 1 and Cell 15.
-
Cell 1 has a lower reselection priority than Cell 15.
-
Cell 15 is transmitting default overhead messages.
User Equipment:
-
The Test USIM shall be inserted (State 1).
4.5.5.2
Definition of system information messages
The default overhead messages as specified in clause 4.4 are used.
4.5.5.3
Procedure
Editor note: procedure needs to be specified.
4.5.5.4
Specific message contents
Editor's note: message contents need to be specified where necessary.
4.5.5A
HRPD registration, pre-registration on E-UTRAN (State H2A)
Editor's note: The default parameter and system information will depend on progress in Clause 4.4, once it is
finalised RAN5 can refer to them accordingly.
4.5.5A.1
Initial conditions
System Simulator:
-
Cell 1 and Cell 15.
-
Cell 1 has a lower reselection priority than Cell 15.
-
Cell 15 is transmitting default overhead messages.
User Equipment:
-
The Test USIM shall be inserted (State 1).
4.5.5A.2
Definition of system information messages
The default overhead messages as specified in clause 4.4 are used.
4.5.5A.3
Procedure
Editor's note: procedure needs to be specified.
4.5.5A.4
Specific message contents
Editor's note: message contents need to be specified where necessary.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.6
297
ETSI TS 136 508 V15.5.0 (2019-07)
HRPD session establishment (State H3)
Editor's note: The default parameter and system information will depend on progress in Clause 4.4, once it is
finalised RAN5 can refer to them accordingly.
4.5.6.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in HRPD Registered, Dormant Mode state (State H2).
4.5.6.2
Definition of system information messages
The default overhead messages as specified in clause 4.4 are used.
4.5.6.3
Procedure
Editor's note: procedure needs to be specified.
4.5.6.4
Specific message contents
Editor's note: message contents need to be specified where necessary.
4.5.6A
HRPD session establishment, pre-registered on E-UTRAN (State
H3A)
Editor's note: The default parameter and system information will depend on progress in Clause 4.4, once it is
finalised RAN5 can refer to them accordingly.
4.5.6A.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in HRPD Registered, Dormant Mode, pre-registered on E-UTRAN state (State H2A).
4.5.6A.2
Definition of system information messages
The default overhead messages as specified in clause 4.4 are used.
4.5.6A.3
Procedure
Same procedure as specified in the procedure in clause 4.5.6.3
4.5.6A.4
Specific message contents
Editor's note: message contents need to be specified where necessary.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5.7
298
ETSI TS 136 508 V15.5.0 (2019-07)
Out of Coverage (State 5)
Out of coverage UE operation is applicable only for sidelink direct communication. In this case UE uses preconfigured
radio parameters for transmission and reception of side link direct communication. UE remains in any cell selection
state.
4.5.7.1
Initial conditions
System Simulator:
-
1 cell, default parameters.
-
The procedure shall be performed under the condition that there is no reference signal and SIB transmission by
the cell.
User Equipment:
-
The Test UICC shall be inserted. This shall contain either ISIM and USIM applications or only a USIM
application on UICC.
4.5.7.2
Definition of system information messages
MIB and SIBs are not transmitted.
4.5.7.3
Procedure
UE remains in any cell selection state and search for any available cell.
4.5.8
Out of Coverage, V2X setup (State 5-V2X)
4.5.8.1
Initial conditions
System Simulator:
-
No E-UTRA cell configured
-
1 GNSS simulator
-
1 simulated V2V UE (transmitter or receiver according to specific test case configuration)
User Equipment:
-
If supported by the UE, the Test UICC shall be inserted. This shall contain either ISIM and USIM applications or
only a USIM application on UICC.
4.5.8.2
Definition of system information messages
None.
4.5.8.3
Procedure
UE remains in any cell selection state and search for any available cell.
4.5.9
Out of Coverage, Test Loopback Activation, V2X setup (State 5AV2X)
The same assumptions and definitions apply as in clause 4.5.8. State 5A-V2X shall be invoked either in Receive Mode
or in Transmit Mode, depending on the test purpose.
4.5.9.1
Initial conditions
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
299
ETSI TS 136 508 V15.5.0 (2019-07)
System Simulator:
-
No E-UTRA cell configured
-
1 GNSS simulator
-
1 simulated V2X UE (transmitter or receiver according to specific test case configuration)
User Equipment:
-
The UE shall be in Out of Coverage, V2X setup state (State 5-V2X)
4.5.9.2
Definition of system information messages
None.
4.5.9.3
Procedure
Table 4.5.9.3-1: Out of Coverage, Test Loopback Activation, V2X setup procedure (state 5-V2X to
state 5A-V2X)
Step
1
2A
2B
3
Procedure
Trigger UE to activate UE test loop mode.
NOTE: The activation of UE test loop mode
may be performed by MMI or AT command
(+CATM).
Trigger UE to close UE test loop back mode E
(Receive Mode).
NOTE: Closing of UE test loop mode E may
be performed by MMI or AT command
(+CCUTLE)
Trigger UE to close UE test loop back mode E
(Transmit Mode).
NOTE: Closing of UE test loop mode E may
be performed by MMI or AT command
(+CCUTLE)
Trigger UE to reset or clear the current UTC
time that has been calculated from GNSS.
Message Sequence
Message
U-S
-
-
-
-
-
-
-
-
NOTE: The UTC time can be reset or clear on
the UE using AT command (+CUTCR).
Note 1: If State 5A-V2X was invoked in Receive Mode use Step 2A; if State 5A-V2X was invoked in
Transmit Mode use Step 2B.
4.5.9.4
Specific message contents
All specific message contents shall be referred to clause 4.7I with the exceptions below.
Table 4.5.9.4-1: AT COMMAND: +CATM (Step 1)
Derivation Path: Table 4.7I-1: +CATM with condition Activation
Table 4.5.9.4-2A: AT COMMAND: +CCUTLE (Step 2A)
Derivation Path: Table 4.7I-2: +CCUTLE with condition Close and Receive.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
300
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5.9.4-2B: AT COMMAND: +CCUTLE (Step 2B)
Derivation Path: Table 4.7I-2: +CCUTLE with condition Close and Transmit.
Table 4.5.9.4-3: AT COMMAND: +CUTCR (Step 3)
Derivation Path: Table 4.7I-3: +CUTCR
4.5A
Other generic procedures
4.5A.1
Procedure for IP address allocation in the U-plane
The purpose of this procedure is to allow the successful completion of IP address allocation if it is initiated by the UE
therefore the result from the execution of the Procedure for IP address allocation in the U-plane shall not lead to
assignment of a verdict.
Depending on the UE configuration there may be unpredictable delay in the start of the procedure. A guarding time of
1.2 sec is suggested within which the procedure is expected to start. If the timer expires then the test procedure, from
which the Procedure for IP address allocation in the U-plane is called, shall advance to the next specified step.
Table 4.5A.1-1: Procedure for IP address allocation in the U-plane
Step
-
-
1
Procedure
EXCEPTION: Step 1 below and Step 1 in
Table 4.5A.1-2 describe behaviour that
depends on the contents of the latest PDN
CONNECTIVITY REQUEST message sent by
the UE prior to this procedure.
EXCEPTION: In parallel to the event
described in step 1 below the step specified in
Table 4.5A.1-2 may take place.
If the "PDN type" in the latest PDN
CONNECTIVITY REQUEST message prior to
this procedure was 'IPv4' or 'IPv4v6' then,
IPv4 address allocation by DHCPv4 may
occur on the user plane bearer established for
the default EPS bearer context activated with
the latest ACTIVATE DEFAULT EPS
BEARER CONTEXT message prior to this
procedure.
Message Sequence
Message
U-S
-
-
-
-
-
-
Table 4.5A.1-2: Procedure for IP address allocation in the U-plane, parallel behaviour
Step
1
Procedure
If the "PDN type" in the latest PDN
CONNECTIVITY REQUEST message prior to
this procedure was 'IPv6' or 'IPv4v6' then
stateless address auto configuration occurs
on the user plane bearer established for the
default EPS bearer context activated with the
latest ACTIVATE DEFAULT EPS BEARER
CONTEXT message prior to this procedure.
4.5A.2
U-S
-
Tracking area updating procedure
The procedure is defined in table 4.5A.2.1-1.
ETSI
Message Sequence
Message
-
3GPP TS 36.508 version 15.5.0 Release 15
301
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.2.1-1: Tracking area updating procedure
Step
1
2
3
4
5
Procedure
Message Sequence
Message
RRC: SYSTEM INFORMATION (BCCH)
U-S
<--
The SS transmits system information on the
cell specified in the test case.
The UE transmits an RRCConnectionRequest
message on the cell specified in the test case.
SS transmits an RRCConnectionSetup
message.
The UE transmits an
RRCConnectionSetupComplete message to
confirm the successful completion of the
connection establishment and a TRACKING
AREA UPDATE REQUEST message is sent to
update the registration of the actual tracking
area.
SS responds with TRACKING AREA UPDATE
ACCEPT message.
RRC: RRCConnectionRequest
-->
RRC: RRCConnectionSetup
<--->
RRC: RRCConnectionSetupComplete
NAS: TRACKING AREA UPDATE
REQUEST
<--
RRC: DLInformationTransfer
NAS: TRACKING AREA UPDATE
ACCEPT
RRC: ULInformationTransfer
NAS: TRACKING AREA UPDATE
COMPLETE
RRC: RRCConnectionRelease
6
The UE transmits a TRACKING AREA
UPDATE COMPLETE
-->
7
The SS transmits an RRCConnectionRelease
message to release RRC connection and
move to RRC_IDLE.
<--
NOTE 1: The periodic tracking area updating timer T3412 is deactivated by default during the attach procedure (TS
36.508 clause 4.7.2).
NOTE 2: The SS does not initiate authentication and NAS SECURITY MODE COMMAND are not performed
(reuse of keys allocated during the attach procedure).
4.5A.3
Procedure for IMS signalling
The purpose of this procedure is to allow the successful completion of IMS signalling if it is initiated by the UE.
The UE may initiate IMS registration according TS 24.229 [40] clause 5.1. The procedure is applicable for UEs with
IMS support (TS 36.523-2 A.4.4-1/25).
Table 4.5A.3-1: Procedure for IMS signalling in the U-plane
Step
1-9
-
10a1
-
10a2
a110a2
a9
10a2
b1
Note 1:
Procedure
Void
EXCEPTION: Steps 10a1 to 10a2b1 describe
a transaction that depends on the UE
capability
IF pc_IMS then the SS starts timer Timer_1 =
10 s (Note 1)
EXCEPTION: Steps 10a2a1 to 10a2b1
describe a transaction that depends on the
UE implementation
Registration procedure according TS 34.2291 [43] subclause C.2 (steps 3-11)
Note: SS cancels timer Timer_1 at step
10a2a1.
The SS waits for Timer_1 expiry
Message Sequence
Message
U-S
-
-
-
-
-
-
-
-
-
-
Depending on the UE configuration there may be unpredictable delay in the start of the
procedure. A guarding time of [10] sec is suggested within which the procedure is expected to
start. If the timer expires then the test procedure, from which the Procedure for IMS signalling Uplane is called, shall advance to the next specified step
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
302
ETSI TS 136 508 V15.5.0 (2019-07)
4.5A.3A Procedure for IMS Signalling over UTRA
The purpose of this procedure is to allow the successful completion of IMS signalling if it is initiated by the UE.
The UE may initiate IMS registration according TS 24.229 [40] clause 5.1. The procedure is applicable for UEs with
IMS support (TS 36.523-2 A.4.4-1/25).
4.5A.3A.1
Initial conditions
System Simulator:
-
1 UTRA cell, default parameters.
-
The procedure shall be performed under ideal radio conditions as defined in clause 5
User Equipment:
-
The Test UICC shall be inserted. This shall contain either ISIM and USIM applications or only a USIM
application on UICC.
-
The UE is in state Registered, Idle Mode (state 3 or 7) according to TS 34.108 [5]
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.3A.2
303
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5A.3A.2-1: Procedure for IMS Signalling over UTRA
Step
-
1a1
1a2a1
1a2a2
1a2a3
1a2a4
1a2a5
1a2a6
1a2a7
1a2a8
1a2a9
1a2a10
1a2a11
1a2a13
1a2a13
A1a
1a2a13
A21a2a13
A10
1a2a14
1a2a15
1a2b1
Procedure
EXCEPTION: Steps 1a1 to 1a2b1
describe a transaction that depends on
UE capability.
IF pc_IMS then the SS starts timer
Timer_1 = 10 s
EXCEPTION: Steps 1a2a1 to 1a2a15
describe a transaction that depends on
the UE supporting IMS over UTRA.
UE transmits a RRC CONNECTION
REQUEST message.
SS transmits a RRC CONNECTION
SETUP message.
The UE transmits a RRC CONNECTION
SETUP COMPLETE message
The UE transmits a SERVICE REQUEST
message
SS transmits a GMM AUTHENTICATION
AND CIPHERING REQUEST message
The UE transmits a GMM
AUTHENTICATION AND CIPHERING
RESPONSE
SS transmits a SECURITY MODE
COMMAND message
UE transmits a SECURITY MODE
COMPLETE message
The UE transmits a ACTIVATE PDP
CONTEXT REQUEST message
The SS transmits a RADIO BEARER
SETUP message
The UE transmits a RADIO BEARER
SETUP COMPLETE message
The SS transmits a ACTIVATE PDP
CONTEXT ACCEPT message
IF initiated by the UE for IP address
allocation
IP address allocation in the U-plane
specified in TS 34.108 [5] subclause 7.2.6
takes place performing IP address
allocation in the U-plane.
Registration procedure according TS
34.229-1 [43] subclause C.2 (steps 3-11)
whereby the UE is allowed to retransmit
the requests in steps 4, 6, and 8 when
using UDP.
Note: SS cancels timer Timer_1 at step
1a2a13a1.
Upon completion of the U-plane signalling,
the SS transmits a RRC CONNECTION
RELEASE message
The UE transmits a RRC CONNECTION
RELEASE COMPLETE message
The SS waits for Timer_1 expiry
Message Sequence
Message
U-S
-
-
-
-
-
-
-->
<--->
RRC CONNECTION REQUEST
RRC CONNECTION SETUP
RRC CONNECTION SETUP COMPLETE
-->
INITIAL DIRECT TRANSFER
<--
GMM AUTHENTICATION AND
CIPHERING REQUEST
GMM AUTHENTICATION AND
CIPHERING RESPONSE
-->
<--
SECURITY MODE COMMAND
-->
SECURITY MODE COMPLETE
-->
ACTIVATE PDP CONTEXT REQUEST
<--
RADIO BEARER SETUP
-->
RADIO BEARER SETUP COMPLETE
<--
ACTIVATE PDP CONTEXT ACCEPT
-
-
-
-
-
-
<--
RRC CONNECTION RELEASE
-->
RRC CONNECTION RELEASE
COMPLETE
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.3A.3
304
ETSI TS 136 508 V15.5.0 (2019-07)
Specific message contents
Table 4.5A.3A.3-1: ACTIVATE PDP CONTEXT REQUEST (Step 1a2a9)
Derivation Path: 24.008 Table 9.5.1
Information Element
Requested NSAPI
NSAPI value
Requested LLC SAPI
LLC SAPI value
Requested PDP address
PDP type organisation
Value/remark
‘0101’B
NSAPI 5
‘0011’B
LLC SAPI 3
‘0001’
IETF allocated
address
The allowed
values are
respectively IPv4,
IPv6, IPv4v6 and
"unused but
interpreted as
Ipv4 by the
network"
PDP type number
Any value between
‘00100001’B,
‘01010111’B,
‘10001101’B
Address information
Access point name
Not present
Not present or any
allowed value
Any allowed Value
Protocol configuration options
Comment
ETSI
The SS shall
remember this IE
and its contents
because this
affects
subsequent SS
behaviour, e.g.
coding of
ACTIVATE PDP
CONTEXT
ACCEPT
Condition
3GPP TS 36.508 version 15.5.0 Release 15
305
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.3A.3-2: ACTIVATE PDP CONTEXT ACCEPT (Step 1a2a13)
Derivation Path: 24.008 Table 9.5.2
Information Element
Negotiated LLC SAPI
LLC SAPI value
PDP address
PDP type number
PDN address information
Value/remark
‘00100001’B
IPv4 address
PDP type number
PDN address information
‘01010111’B
IPv6 address
PDP type number
PDN address information (Octets 5 to 8)
‘10001101’B
IPv4 address
0.0.0.0
PDN address information (Octets 9 to 24)
IPv6 address
Protocol configuration options
Configuration protocol
Container ID 1
‘000’B
‘0001’H
Length of container ID 1 contents
Container ID 2
IPv6 address
Container ID n
IPv4 address
‘0003’H
Length of container ID n contents
Container ID n contents
Container ID n+1
IPv6 address
‘000D’H
Length of container ID n+1 contents
Container ID n+1 contents
IPv4
The SS provides a
valid IPv4 address
DHCPv4 is to be
used to allocate
the IPv4 address
IPv6
The SS provides a
valid IPv6 address
IPv4v6
The SS provides a
valid IPv4 address
DHCPv4 is to be
used to allocate
the IPv4 address
The SS provides a
valid IPv6 address
IPv4
NOT IPv4DHCP
IPv4-DHCP
IPv4 address
ETSI
IPv6
IPv4v6
NOT IPv4DHCP
IPv4-DHCP
IPv6
P-CSCF
IPv6
Length value
determined by the
TTCN
implementation
P-CSCF IPv6
Address
‘000C’H
Length of container ID 2 contents
Container ID 2 contents
Condition
Same as requested in
ACTIVATE PDP
CONTEXT REQUEST
0.0.0.0
Container ID 1 contents
Comment
P-CSCF
IPv4
Length value
determined by the
TTCN
implementation
P-CSCF IPv4
Address
n assigned to next
available number
Length value
determined by the
TTCN
implementation
DNS IPv6
Address
n assigned to next
available number
Length value
determined by the
TTCN
implementation
DNS IPv4
Address
DNS IPv6
DNS IPv4
3GPP TS 36.508 version 15.5.0 Release 15
Condition
IPv4
IPv6
IPv4v6
IPv4-DHCP
P-CSCF IPv6
P-CSCF IPv4
DNS IPv6
DNS IPv4
306
ETSI TS 136 508 V15.5.0 (2019-07)
Explanation
If the ACTIVATE PDP CONTEXT REQUEST message, contains the PDN type as Ipv4
If the ACTIVATE PDP CONTEXT REQUEST message, contains the PDN type as Ipv6
If the ACTIVATE PDP CONTEXT REQUEST message, contains the PDN type as Ipv4v6
If the ACTIVATE PDP CONTEXT REQUEST message sent prior to this message, the IE
Protocol configuration options contains a configuration protocol option "IPv4 address
allocation via DHCPv4", length of contents = 0).
Note 1: This condition is used in conjunction with IPv4 or IPv4v6 as indicated in the "PDN
address row" just above.
If the ACTIVATE PDP CONTEXT REQUEST sent prior to this message, the Protocol
configuration options and the additional parameter list was included with a “P-CSCF IPv6
Address Request”.
Note 1: This condition is only applicable for UEs with IMS support (TS 36.523-2 A.4.41/25).
If in the ACTIVATE PDP CONTEXT REQUEST message sent prior to this message, the
Protocol configuration options and the additional parameter list was included with a “PCSCF IPv4 Address Request”
Note 1: This condition is only applicable for UEs with IMS support (TS 36.523-2 A.4.41/25).
If the ACTIVATE PDP CONTEXT REQUEST message sent prior to this message, the
Protocol configuration options and the additional parameter list was included with a “DNS
IPv6 Address Request”.
If the ACTIVATE PDP CONTEXT REQUEST message sent prior to this message, the
Protocol configuration options and the additional parameter list was included with a “DNS
IPv4 Address Request”.
4.5A.3B Procedure for preventing IMS Signalling over GERAN
The purpose of this procedure is to prevent IMS signalling if it is initiated by the UE.
The UE may initiate IMS registration according TS 24.229 [40] clause 5.1. The procedure is applicable for UEs with
IMS support (TS 36.523-2 A.4.4-1/25).
4.5A.3B.1
Initial conditions
System Simulator:
-
1 GERAN cell, default parameters.
-
The procedure shall be performed under ideal radio conditions as defined in clause 5
User Equipment:
-
The Test UICC shall be inserted. This shall contain either ISIM and USIM applications or only a USIM
application on UICC.
-
The UE is GPRS attached according to TS 51.010 [25]
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.3B.2
307
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5A.3B.2-1: Procedure for IMS Signalling over GERAN
Step
-
1a1
1a2a1
1a2a2
1a2a3
1a2a4
1a2a5
1a2b1
4.5A.3B.3
Procedure
EXCEPTION: Steps 1a1 to 1a2b1
describe a transaction that depends on
UE capability.
IF pc_IMS then the SS starts timer
Timer_1 = 10 s
EXCEPTION: Steps 1a2a1 to 1a2a4
describe a transaction that depends on
the UE supporting IMS over GERAN
UE transmits CHANNEL REQUEST
SS sends IMMEDIATE ASSIGNMENT
The UE transmits a ACTIVATE PDP
CONTEXT REQUEST message
The SS transmits a ACTIVATE PDP
CONTEXT REJECT message
The SS waits for 5 seconds
The SS waits for Timer_1 expiry
Message Sequence
Message
U-S
-
-
-
-
-
-
-->
<--->
CHANNEL REQUEST
IMMEDIATE ASSIGNMENT
ACTIVATE PDP CONTEXT REQUEST
<--
ACTIVATE PDP CONTEXT REJECT
-
-
Specific message contents
Table 4.5A.3B.3-1: ACTIVATE PDP CONTEXT REQUEST (Step 1a2a3)
Derivation Path: 24.008 Table 9.5.1
Information Element
Requested NSAPI
NSAPI value
Requested LLC SAPI
LLC SAPI value
Requested PDP address
PDP type organisation
Value/remark
‘0101’B
NSAPI 5
‘0011’B
LLC SAPI 3
‘0001’
IETF allocated
address
The allowed
values are
respectively IPv4,
IPv6, IPv4v6 and
"unused but
interpreted as
Ipv4 by the
network"
PDP type number
Any allowed value
Address information
Access point name
Not present
Not present or any
allowed value
Any allowed Value
Protocol configuration options
Comment
ETSI
The SS shall
remember this IE
and its contents
because this
affects
subsequent SS
behaviour, e.g.
coding of
ACTIVATE PDP
CONTEXT
ACCEPT
Condition
3GPP TS 36.508 version 15.5.0 Release 15
308
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.3B.3-2: ACTIVATE PDP CONTEXT REJECT (Step 1a2a4)
Derivation Path: 24.008 Table 9.5.3
Information Element
Protocol discriminator
Transaction identifier
Activate PDP context reject message identity
SM cause
Value/remark
'1010'B
Same as requested in
ACTIVATE PDP
CONTEXT REQUEST
‘01000011’B
'42'O
Protocol configuration options
Back-off timer value
Re-attempt indicator
omit
omit
omit
4.5A.4
Comment
Condition
#66 Requested
APN not
supported in
current RAT and
PLMN
combination
Generic Test Procedure for IMS Emergency call establishment in
EUTRA: Normal Service
4.5A.4.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2).
4.5A.4.2
Definition of system information messages
The default system information messages are used.
4.5A.4.3
Procedure
The establishment of IMS emergency call is assumed to always be mobile originated.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
309
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.4.3-1: EUTRA/EPS signalling for IMS Emergency Call
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
St
1
2
3
4
5
6
7
8
9
10
-
11
12
13
14
310
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Make the UE attempt an IMS emergency call
The UE transmits an RRCConnectionRequest message
with 'establishmentCause' set to 'emergency'.
SS transmit an RRCConnectionSetup message.
The UE transmits an RRCConnectionSetupComplete
message to confirm the successful completion of the
connection establishment and to initiate the session
management procedure by including the SERVICE
REQUEST message.
The SS transmits a SecurityModeCommand message
to activate AS security.
The UE transmits a SecurityModeComplete message
and establishes the initial security configuration.
The SS configures a new data radio bearer, associated
with the default EPS bearer context.
The RRCConnectionReconfiguration message is using
condition SRB2-DRB(1, 0). The DRB associated with
default EPS bearer context obtained during the attach
procedure is established
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer context.
The UE transmits a PDN CONNECTIVITY REQUEST
message to request an additional PDN, with 'Request
type' set to 'emergency ('0100'B )'.
The SS configures a new data radio bearer, associated
with the default EPS bearer context.
RRCConnectionReconfiguration message contains the
ACTIVATE DEFAULT EPS BEARER CONTEXT
REQUEST message. EPS bearer context #2 (QCI 5)
according to table 6.6.1-1: Reference default EPS
bearer context is used.
Note: The APN is set to the test APN defined for
emergency bearer services.
EXCEPTION: In parallel to the events described in
steps 11 to 15 below, the behaviour in table 4.5A.4.3-2
occurs. (Optional IP address allocation followed by IMS
emergency registration and IMS emergency speech call
establishment)
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer for emergency
call.
The UE transmits an ACTIVATE DEFAULT EPS
BEARER CONTEXT ACCEPT message.
The SS configures a new RLC-UM data radio bearer,
associated with the dedicated EPS bearer context.
RRCConnectionReconfiguration message contains the
ACTIVATE DEDICATED EPS BEARER CONTEXT
REQUEST message. EPS bearer context #4 (QCI 1)
according to table 6.6.2-1: Reference dedicated EPS
bearer contexts is used.
Note: the same PDN address is applicable because the
linked EPS bearer ID refers to the default EBC
allocated in step 10
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer for emergency
IMS signalling.
ETSI
U-S
-->
Message Sequence
Message
RRCConnectionRequest
<--->
RRC: RRCConnectionSetup
RRC: RRCConnectionSetupComplete
NAS: SERVICE REQUEST
<--
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: RRCConnectionReconfiguration
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
PDN CONNECTIVITY REQUEST
<--
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEFAULT EPS BEARER
CONTEXT REQUEST
-
-
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
RRC: ULInformationTransfer
NAS:ACTIVATE DEFAULT EPS
BEARER CONTEXT ACCEPT
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
<--
-->
RRC:
RRCConnectionReconfigurationComplet
e
3GPP TS 36.508 version 15.5.0 Release 15
15
311
ETSI TS 136 508 V15.5.0 (2019-07)
The UE transmits an ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT message.
-->
RRC: ULInformationTransfer
NAS:ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
Table 4.5A.4.3-2: Parallel behaviour
St
1
2-5
610
Procedure
EXCEPTION: Step 1 describes behaviour that
depends on the UE behaviour.
If initiated by the UE the generic procedure for
IP address allocation in the U-plane specified
in TS 36.508 subclause 4.5A.1 takes place
performing IP address allocation in the Uplane.
Steps 1-4 expected sequence defined in
annex C.20 of TS 34.229-1 [35]. Emergency
registration procedure is performed.
Steps 1-5 defined in annex C.22 of TS 34.2291 [35]. IMS Emergency call for EPS is
established.
4.5A.4.4
Message Sequence
Message
U-S
-
-
-
-
-
-
-
-
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7 with the exceptions below.
Table 4.5A.4.4-1: Message ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST (step 10, Table
4.5A.4.3-1)
Derivation path: Table 4.7.3-6 and table 4.6.1-8 with condition AM-DRB-ADD(2)
Information Element
Value/Remark
Access point name
sos
EPS QoS
According to reference
default EPS bearer
context #2 – in table
6.6.1-1
Comment
APN value as
recommended by
IR.88 clause 6.4
[56]
SS defines an
additional
dedicated EPS
QoS
Condition
Table 4.5A.4.4-3: Message ACTIVATE DEDICATED EPS BEARER CONTEXT REQUEST (step 13, Table
4.5A.4.3-1)
Derivation path: Table 4.7.3-3 and table 4.6.1-8 with condition UM-DRB-ADD(3)
Information Element
Value/Remark
Linked EPS bearer identity
Default EBId-2 (same
value like in table
4.5A.4.4-1)
EPS QoS
According to reference
dedicated EPS bearer
context #1 - in table
6.6.2-1
TFT
According to reference
dedicated EPS bearer
context #1 - in table
6.6.2-1
ETSI
Comment
SS defines an
additional
dedicated EPS
QoS
Condition
3GPP TS 36.508 version 15.5.0 Release 15
312
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.4.4-4: PDN CONNECTIVITY REQUEST (step 9)
Derivation Path: Table 4.7.3-20
Information Element
Access point name
4.5A.5
Value/remark
Not present or any value
Comment
Condition
Generic Test Procedure for IMS Emergency call establishment in
EUTRA: Limited Service
4.5A.5.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE is switched on and camped on the cell in EMM-DEREGISTERED.LIMITED-SERVICE state.
4.5A.5.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.5.3
313
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
The establishment of IMS emergency call is assumed to always be mobile originated.
Table 4.5A.5.3-1: EUTRA/EPS signalling for IMS Emergency Call in limited service
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
St
1
2
3
4
-
5a1
-
5a2
a1
5a2
b1
6a1
6b1
7
8
-
9a1
9a2
314
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Make the UE attempt an IMS emergency call
The UE transmits an RRCConnectionRequest
message with 'establishmentCause' set to
'emergency'.
SS transmits an RRCConnectionSetup
message.
The UE transmits an
RRCConnectionSetupComplete message to
confirm the successful completion of the
connection establishment and to initiate the
Attach procedure by including the ATTACH
REQUEST message, EPS attach type set to
“EPS emergency attach" ('0110'B). The PDN
CONNECTIVITY REQUEST message is
piggybacked in ATTACH REQUEST, with
'Request type' set to 'emergency ('0100'B)'.
EXCEPTION: Steps 5a1 to 5a2b1 describe
behaviour that depends on the UE ID sent in
the ATTACH REQUEST message in step 4
and take place only if the UE does not send
IMEI.
The SS transmits an AUTHENTICATION
REQUEST message to initiate the EPS
authentication and AKA procedure.
EXCEPTION: Steps 5a2a1 to 5a2b1 describe
behaviour that depends on the UE state; the
"lower case letter" identifies a step sequence
that takes place if the UE is in a particular
state.
UE transmits an AUTHENTICATION
RESPONSE message and establishes mutual
authentication.
UE transmits an AUTHENTICATION FAILURE
message with EMM cause #20 "MAC failure"
or EMM cause #21 "synch failure". (Note 2)
Void
Void
The SS transmits a NAS SECURITY MODE
COMMAND message to activate NAS security
selecting.
Note: If UE has sent Authentication Failure in
step 5a2b16b1 or the behaviour described in
steps 5a1 to 5a2b1 does not take place, KSI
value is set to "000" and EIA0 (NULL integrity),
and EEA0 (NULL ciphering) algorithms are
used.
The UE transmits a NAS SECURITY MODE
COMPLETE message and establishes the
initial security configuration.
EXCEPTION: Steps 9a1 to 9a2 describe
behaviour that depends on UE configuration;
the "lower case letter" identifies a step
sequence that take place if the UE has ESM
information which needs to be transferred.
IF the UE sets the ESM information transfer
flag in the last PDN CONNECTIVITY
REQUEST message THEN the SS transmits
an ESM INFORMATION REQUEST message
to initiate exchange of protocol configuration
options and/or APN.
The UE transmits an ESM INFORMATION
RESPONSE message to transfer protocol
configuration options and/or APN.
U-S
-->
<--->
-
<--
Message Sequence
Message
RRCConnectionRequest
RRC: RRCConnectionSetup
RRC: RRCConnectionSetupComplete
NAS: ATTACH REQUEST
NAS: PDN CONNECTIVITY REQUEST
-
RRC: DLInformationTransfer
NAS: AUTHENTICATION REQUEST
-
-
-->
RRC: ULInformationTransfer
NAS: AUTHENTICATION RESPONSE
-->
RRC: ULInformationTransfer
NAS: AUTHENTICATION FAILURE
-
RRC: DLInformationTransfer
NAS: SECURITY MODE COMMAND
<--
-->
-
RRC: ULInformationTransfer
NAS: SECURITY MODE COMPLETE
-
<--
RRC: DLInformationTransfer
NAS: ESM INFORMATION REQUEST
-->
RRC: ULInformationTransfer
NAS: ESM INFORMATION RESPONSE
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
10
11
12
13
14
-
15
16
17
315
ETSI TS 136 508 V15.5.0 (2019-07)
The SS transmits a SecurityModeCommand
message to activate AS security.
Note: If UE has sent Authentication Failure in
step 5a2b1, or the behaviour described in
steps 5a1 to 5a2b1 does not take place, then,
eia0 (NULL integrity), and eea0 (NULL
ciphering) algorithms are used.
The UE transmits a SecurityModeComplete
message and establishes the initial security
configuration.
The SS transmits a UECapabilityEnquiry
message to initiate the UE radio access
capability transfer procedure.
The UE transmits a UECapabilityInformation
message to transfer UE radio access
capability.
The SS transmits an
RRCConnectionReconfiguration message to
establish the default bearer with condition
SRB2-DRB(1, 0). The DRB associated with
default EPS bearer context #2 (QCI 5)
according to table 6.6.1-1: Reference default
EPS bearer contexts, obtained during the
attach procedure, is established.
This message includes the ATTACH ACCEPT
message with EPS attach result set to “EPS
only" ('001'B). The ACTIVATE DEFAULT EPS
BEARER CONTEXT REQUEST message is
piggybacked in ATTACH ACCEPT.
Note: The APN is set to the test APN defined
for emergency bearer services
EXCEPTION: In parallel to the events
described in steps 15 to 19 below, the
behaviour in table 4.5A.5.3-2 occurs. (Optional
IP address allocation followed by IMS
emergency speech call establishment)
The UE transmits an
RRCConnectionReconfigurationComplete
message to confirm the establishment of
default bearer.
This message includes the ATTACH
COMPLETE message. The ACTIVATE
DEFAULT EPS BEARER CONTEXT ACCEPT
message is piggybacked in ATTACH
COMPLETE.
<--
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: UECapabilityEnquiry
-->
RRC: UECapabilityInformation
<--
RRC: RRCConnectionReconfiguration
NAS: ATTACH ACCEPT
NAS: ACTIVATE DEFAULT EPS BEARER
CONTEXT REQUEST
The SS configures a new RLC-UM data radio
bearer, associated with the dedicated EPS
bearer context.
RRCConnectionReconfiguration message
contains the ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message.
-
-
-->
RRC: RRCConnectionReconfigurationComplete
-->
RRC: ULInformationTransfer
NAS: ATTACH COMPLETE
NAS: ACTIVATE DEFAULT EPS BEARER
CONTEXT ACCEPT
<--
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER CONTEXT
REQUEST
-->
RRC: RRCConnectionReconfigurationComplete
-->
RRC: ULInformationTransfer
NAS:ACTIVATE DEDICATED EPS BEARER
CONTEXT ACCEPT
EPS bearer context #4 (QCI 1) according to
table 6.6.2-1: Reference dedicated EPS bearer
contexts is used.
18
19
Note: the same PDN address is applicable
because the linked EPS bearer ID refers to the
default EBC allocated in step 10
The UE transmits an
RRCConnectionReconfigurationComplete
message to confirm the establishment of the
new data radio bearer, associated with the
default EPS bearer for emergency IMS
signalling.
The UE transmits an ACTIVATE DEDICATED
EPS BEARER CONTEXT ACCEPT message.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Note 1:
Note 2:
316
ETSI TS 136 508 V15.5.0 (2019-07)
Void
EMM cause #26 "non-EPS authentication unacceptable" is not expected to happen as SS will not set the
"separation bit" in the AMF field of AUTN as 0
Table 4.5A.5.3-2: Parallel behaviour
St
Procedure
1
2-6
EXCEPTION: Step 1 describes behaviour that
depends on the UE behaviour.
If initiated by the UE the generic procedure for
IP address allocation in the U-plane specified
in TS 36.508 subclause 4.5A.1 takes place
performing IP address allocation in the Uplane.
Steps 1-5 defined in annex C.22 of TS 34.2291 [35]. IMS Emergency call for EPS is
established.
4.5A.5.4
Message Sequence
Message
U-S
-
-
-
-
-
-
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7 with the exceptions below.
Table 4.5A.5.4-1: SECURITY MODE COMMAND (step 7, Table 4.5A.5.3-1)
Derivation Path: Table 4.7.2-19
Information Element
Type of integrity protection algorithm
Type of ciphering algorithm
NAS key set identifier
NAS key set identifier
Value/remark
Set according to PIXIT
parameter for default
integrity protection
algorithm
EIA0
Comment
NullAlgorith
mUsed
NOT
NullAlgorith
mUsed
NullAlgorith
mUsed
Set according to PIXIT
parameter for default
ciphering algorithm
EEA0
The valid NAS key set
identifier.
NOT
NullAlgorith
mUsed
NullAlgorith
mUsed
'000'B
TSC
Spare half octet
Condition
NullAlgorithmUsed
'0'B
Condition
NOT
NullAlgorith
mUsed
native security
context (for
KSIASME)
'0000'B
Explanation
UE has sent Authentication Failure in step 5ab1 (Table 4.5A.5.3-1), or the behaviour
described in steps 5a1 to 5a2b1 does not take place (Table 4.5A.5.3-1).
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
317
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.5.4-2: SecurityModeCommand (step 10, Table 4.5A.5.3-1)
Derivation Path: Table 4.6.1-19
Information Element
SecurityModeCommand ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE{
securityModeCommand-r8 SEQUENCE {
securityConfigSMC
nonCriticalExtension SEQUENCE {}
Value/remark
Comment
Condition
RRCTransactionIdentifier-DL
SecurityConfigSMCLimitedService
Not present
Table 4.5A.5.4-3
}
}
}
}
Table 4.5A.5.4-3: SecurityConfigSMC-LimitedService (Table 4.5A.5.4-2)
Derivation Path: Table 4.6.4-2
Information Element
SecurityConfigSMC- LimitedService ::= SEQUENCE {
securityAlgorithmConfig SEQUENCE {
Value/remark
cipheringAlgorithm
Set according to PIXIT
parameter for default
ciphering algorithm
eea0
integrityProtAlgorithm
Set according to PIXIT
parameter for default
integrity protection
algorithm
eia0
Comment
Condition
NOT
NullAlgorith
mUsed
NullAlgorith
mUsed
NOT
NullAlgorith
mUsed
NullAlgorith
mUsed
}
Condition
NullAlgorithmUsed
Explanation
UE has sent Authentication Failure in step 5a2b1 (Table 4.5A.5.3-1), or the behaviour
described in steps 5a1 to 5a2b1 (Table 4.5A.5.3-1) does not take place.
Table 4.5A.5.4-4: Message ACTIVATE DEDICATED EPS BEARER CONTEXT REQUEST (step 17, Table
4.5A.5.3-1)
Derivation path: Table 4.7.3-3 and table 4.6.1-8 with condition UM-DRB-ADD(3)
Information Element
Value/Remark
Linked EPS bearer identity
Default EBId-2 (same
value as in table
4.5A.5.4-4)
EPS QoS
See Reference dedicated
EPS bearer context #4 in
table 6.6.2-1
TFT
See Reference dedicated
EPS bearer context #4 in
table 6.6.2-1
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
318
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.5.4-5: Message ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST (step 14, Table
4.5A.5.3-1)
Derivation path: Table 4.7.3-6 and table 4.6.1-8 with condition AM-DRB-ADD(2)
Information Element
Value/Remark
Access point name
sos
EPS QoS
According to reference
default EPS bearer
context #2 – in table
6.6.1-1
Comment
Condition
APN value as
recommended by
IR.88 clause 6.4
[56]
SS defines an
additional
dedicated EPS
bearer
Table 4.5A.5.4-6: Message ESM INFORMATION RESPONSE (step 9a2, Table 4.5A.5.3-1)
Derivation Path: Table 4.7.3-14
Information Element
Access point name
4.5A.6
Value/remark
Not present or any value
Comment
Condition
Generic Test Procedure for IMS MO speech call establishment in EUTRA
4.5A.6.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2).
4.5A.6.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.6.3
319
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5A.6.3-1: EUTRA/EPS signalling for IMS MO speech call
St
1
2
3
4
5
6
7
-
8
9a111a1
9b111b1
12
-
Procedure
Make the UE attempt an IMS speech call
The UE transmits an RRCConnectionRequest message
with ' establishmentCause' set to ' mo-Data '.
SS transmit an RRCConnectionSetup message.
The UE transmits an RRCConnectionSetupComplete
message to confirm the successful completion of the
connection establishment and to initiate the session
management procedure by including the SERVICE
REQUEST message.
The SS transmits a SecurityModeCommand message
to activate AS security.
The UE transmits a SecurityModeComplete message
and establishes the initial security configuration.
The SS configures a new data radio bearer, associated
with the default EPS bearer context.
The RRCConnectionReconfiguration message is using
condition SRB2-DRB(1, 0). The DRB associated with
default EPS bearer context obtained during the attach
procedure is established
EXCEPTION: In parallel to the events described in
steps 8 below, the behaviour in table 4.5A.6.3-2 occurs.
(IMS MTSI MO speech call establishment)
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer context.
EXCEPTION: Steps 9a1 to 11b1 describe behaviour
that depends on the UE category.
IF not pc_ue_CategoryDL_M1 THEN steps 3-4 from the
expected sequence defined in annex C.21of TS 34.2291 [35]. MTSI MO speech call for EPS take place.
IF pc_ue_CategoryDL_M1 THEN steps 3-4 from the
expected sequence defined in annex C.21d of TS
34.229-1 [35]. MTSI MO speech call for EPS / UE
category M1 take place.
The SS configures a new RLC-UM data radio bearer
with condition DRB (0,1), associated with the dedicated
EPS bearer context. RRCConnectionReconfiguration
message contains the ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message. EPS bearer
context #4 (QCI 1) according to table 6.6.2-1:
Reference dedicated EPS bearer contexts.
EXCEPTION: In parallel to the events described in
steps 13-14 below, the behaviour in table 4.5A.6.3-3
occurs. (IMS MTSI MO speech call establishment)
U-S
-->
Message Sequence
Message
RRCConnectionRequest
<--->
RRC: RRCConnectionSetup
RRC: RRCConnectionSetupComplete
NAS: SERVICE REQUEST
<--
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: RRCConnectionReconfiguration
-
-->
-
RRC:
RRCConnectionReconfigurationComplet
e
-
-
-
-
-
-
<--
-
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
-
13
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the dedicated EPS bearer.
-->
RRC:
RRCConnectionReconfigurationComplet
e
14
The UE transmits an ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT message.
-->
RRC: ULInformationTransfer
NAS:ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
320
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.6.3-2: Parallel behaviour
St
Procedure
Message Sequence
Message
U-S
1a1
1b1
. EXCEPTION: Steps 1a1 to 1b1 describe
behaviour that depends on the UE category.
IF not pc_ue_CategoryDL_M1 THEN THEN
the step 2 expected sequence defined in
annex C.21 of TS 34.229-1 [35]. UE sends
INVITE take place.
IF pc_ue_CategoryDL_M1 THEN THEN Step
2 from the expected sequence defined in
annex C.21d of TS 34.229-1 [35]. UE sends
INVITE take place.
-
-
-
-
Table 4.5A.6.3-3: Parallel behaviour
St
Procedure
Message Sequence
Message
U-S
1a1
8a1
1b1
8b1
. EXCEPTION: Steps 1a1 to 8b1 describe
behaviour that depends on the UE category.
IF not pc_ue_CategoryDL_M1 THEN HEN the
steps from the 5-13 expected sequence
defined in annex C.21 of TS 34.229-1 [35].
MTSI MO speech call for EPS take place.
IF pc_ue_CategoryDL_M1 THEN the steps 513 from the expected sequence defined in
annex C.21d of TS 34.229-1 [35]. MTSI MO
speech call for EPS / UE category M1 take
place.
4.5A.6.4
-
-
-
-
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7.
4.5A.7
Generic Test Procedure for IMS MT Speech call establishment in EUTRA
4.5A.7.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2).
4.5A.7.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.7.3
321
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5A.7.3-1: EUTRA/EPS signalling for IMS MT speech call
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
St
1
2
3
4
5
6
7
8
9a112a3
9b112b3
13
14
15
-
322
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
SS sends a Paging message to the UE on the
appropriate paging block, and including the UE identity
in one entry of the IE pagingRecordLists.
The UE transmits an RRCConnectionRequest message
with ' establishmentCause' set to 'mt-Access'.
SS transmit an RRCConnectionSetup message.
The UE transmits an RRCConnectionSetupComplete
message to confirm the successful completion of the
connection establishment and to initiate the session
management procedure by including the SERVICE
REQUEST message.
The SS transmits a SecurityModeCommand message
to activate AS security.
The UE transmits a SecurityModeComplete message
and establishes the initial security configuration.
The SS configures a new data radio bearer, associated
with the default EPS bearer context.
The RRCConnectionReconfiguration message is using
condition SRB2-DRB(1, 0). The DRB associated with
default EPS bearer context obtained during the attach
procedure is established
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer context.
EXCEPTION: Steps 9a1 to 12b3 describe behaviour
that depends on the UE category.
IF not pc_ue_CategoryDL_M1 THEN THEN the steps
1-6 from the expected sequence defined in annex C.11
of TS 34.229-1 [35]. MTSI MT speech call take place.
IF pc_ue_CategoryDL_M1 THEN steps 1-6 from the
expected sequence defined in annex C.11d of TS
34.229-1 [35]. MTSI MT speech call / UE category M1
take place.
The SS configures a new RLC-UM data radio bearer
with condition DRB (0,1), associated with the dedicated
EPS bearer context. RRCConnectionReconfiguration
message contains the ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message.
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the dedicated EPS bearer.
The UE transmits an ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT message.
U-S
<--
Message Sequence
Message
RRC: Paging (PCCH)
-->
RRCConnectionRequest
<--->
RRC: RRCConnectionSetup
RRC: RRCConnectionSetupComplete
NAS: SERVICE REQUEST
<--
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: RRCConnectionReconfiguration
-->
RRC:
RRCConnectionReconfigurationComplet
e
-
-
-
-
<--
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
RRC: ULInformationTransfer
NAS:ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
EXCEPTION: Steps 18a1 to 22b1 describe behaviour
that depends on the UE category.
16a1
-17
Void
-
-
18a1
22a1
18b1
22b1
IF not pc_ue_CategoryDL_M1 THEN steps 7-11 from
the expected sequence defined in annex C.11 of TS
34.229-1 [35] MTSI MT speech call take place.
IF pc_ue_CategoryDL_M1 THEN the steps 7-11 from
the expected sequence defined in annex C.11d of TS
34.229-1 [35] MTSI MT speech call / UE category M1
take place.
EXCEPTION: Steps 23Aa1 to 23Ab1 describe
behaviour that depends on the UE category.
-
-
-
-
-
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
23A
a1
23A
b1
-
23a1
24a1
23b1
24b1
-
25a1
26a2
25b1
26b1
323
ETSI TS 136 508 V15.5.0 (2019-07)
IF not pc_ue_CategoryDL_M1 THEN step 11A from the
expected sequence defined in annex C.11 of TS
34.229-1 [35] MTSI MT speech call take place.
IF pc_ue_CategoryDL_M1 THEN step 11A from the
expected sequence defined in annex C.11d of TS
34.229-1 [35] MTSI MT speech call / UE category M1
take place.
EXCEPTION: Steps 23a1 to 24b1 describe behaviour
that depends on the UE category.
-
-
-
-
IF not pc_ue_CategoryDL_M1 THEN steps 12-13
expected sequence defined in annex C.11 of TS
34.229-1 [35] MTSI MT speech call take place.
IF pc_ue_CategoryDL_M1 THEN steps 12-13 from the
expected sequence defined in annex C.11d of TS
34.229-1 [35] MTSI MT speech call / UE category M1
take place.
EXCEPTION: Steps 25a1 to 26b1 describe behaviour
that depends on the UE category.
-
-
-
-
IF not pc_ue_CategoryDL_M1 THEN steps 14-15 from
the expected sequence defined in annex C.11 of TS
34.229-1 [35] MTSI MT speech call take place.
IF pc_ue_CategoryDL_M1 THEN steps 14-15 from the
expected sequence defined in annex C.11d of TS
34.229-1 [35] MTSI MT speech call / UE category M1
take place.
-
-
-
-
4.5A.7.4
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7.
4.5A.8
Generic Test Procedure for IMS MO video call establishment in EUTRA
4.5A.8.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2).
4.5A.8.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.8.3
324
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5A.8.3-1: EUTRA/EPS signalling for IMS MO video call
St
1
2
3
4
5
6
7
-
8
9-11
12
-
13
14
15
Procedure
U-S
-->
Make the UE attempt an IMS video call
The UE transmits an RRCConnectionRequest message
with ' establishmentCause' set to ' mo-Data '.
SS transmit an RRCConnectionSetup message.
The UE transmits an RRCConnectionSetupComplete
message to confirm the successful completion of the
connection establishment and to initiate the session
management procedure by including the SERVICE
REQUEST message.
The SS transmits a SecurityModeCommand message
to activate AS security.
The UE transmits a SecurityModeComplete message
and establishes the initial security configuration.
The SS configures a new data radio bearer, associated
with the default EPS bearer context.
The RRCConnectionReconfiguration message is using
condition SRB2-DRB(1, 0). The DRB associated with
default EPS bearer context obtained during the attach
procedure is established
EXCEPTION: In parallel to the events described in
steps 8 below, the behaviour in table 4.5A.8.3-2 occurs.
(IMS MTSI MO video call establishment)
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer context.
Steps 3-4 expected sequence defined in annex C.25 of
TS 34.229-1 [35]. MTSI MO video call for EPS.
The SS configures two new RLC-UM data radio bearers
with condition DRB (0,2), associated with the dedicated
EPS bearer context. RRCConnectionReconfiguration
message contains one ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message per
additional data radio bearer. One EPS bearer context
#4 (QCI 1) and one EPS bearer context #3 (QCI 2)
according table 6.6.2-1: Reference dedicated EPS
bearer contexts.
EXCEPTION: In parallel to the events described in
steps 13-14 below, the behaviour in table 4.5A.8.3-3
occurs. (IMS MTSI MO video call establishment).
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the dedicated EPS bearer. EPS bearer
context #4 (QCI 1) according table to 6.6.2-1:
Reference dedicated EPS bearer contexts.
The UE transmits an ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT message for the first
bearer.
The UE transmits an ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT message for the second
bearer.
Message Sequence
Message
RRCConnectionRequest
<--->
RRC: RRCConnectionSetup
RRC: RRCConnectionSetupComplete
NAS: SERVICE REQUEST
<--
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: RRCConnectionReconfiguration
-
-->
<--
-
-
RRC:
RRCConnectionReconfigurationComplet
e
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
-
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
RRC: ULInformationTransfer
NAS:ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
RRC: ULInformationTransfer
NAS:ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
-->
Table 4.5A.8.3-2: Parallel behaviour
St
1
Procedure
Step 2 expected sequence defined in annex
C.25 of TS 34.229-1 [35]. UE sends INVITE.
U-S
-
ETSI
Message Sequence
Message
-
3GPP TS 36.508 version 15.5.0 Release 15
325
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.8.3-3: Parallel behaviour
St
1-8
Procedure
Steps 5-13 expected sequence defined in
annex C.25 of TS 34.229-1 [35]. MTSI MO
video call for EPS.
4.5A.8.4
U-S
-
Message Sequence
Message
-
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7.
4.5A.9
Generic Test Procedure for IMS MT video call establishment in EUTRA
4.5A.9.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2).
4.5A.9.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.9.3
326
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5A.9.3-1: EUTRA/EPS signalling for IMS MT video call
St
1
2
3
4
5
6
7
8
912b
13
14
15
16
1718
1927
Procedure
SS sends a Paging message to the UE on the
appropriate paging block, and including the UE identity
in one entry of the IE pagingRecordLists.
The UE transmits an RRCConnectionRequest message
with ' establishmentCause' set to 'mt-Access'.
SS transmit an RRCConnectionSetup message.
The UE transmits an RRCConnectionSetupComplete
message to confirm the successful completion of the
connection establishment and to initiate the session
management procedure by including the SERVICE
REQUEST message.
The SS transmits a SecurityModeCommand message
to activate AS security.
The UE transmits a SecurityModeComplete message
and establishes the initial security configuration.
The SS configures a new data radio bearer, associated
with the default EPS bearer context.
The RRCConnectionReconfiguration message is using
condition SRB2-DRB(1, 0). The DRB associated with
default EPS bearer context obtained during the attach
procedure is established
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer context.
Steps 1-6 expected sequence defined in annex C.26 of
TS 34.229-1 [35]. MTSI MT video call.
The SS configures a new RLC-UM data radio bearer
with condition DRB (0,2), associated with the dedicated
EPS bearer context. RRCConnectionReconfiguration
message contains one ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message per
additional data radio bearer. One EPS bearer context
#4 (QCI 1) and one EPS bearer context #3 (QCI 2)
according table 6.6.2-1: Reference dedicated EPS
bearer contexts.
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the dedicated EPS bearer.
The UE transmits an ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT message for the first
bearer.
The UE transmits an ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT message for the second
bearer.
Void
Steps 7-15 expected sequence defined in annex C.26
of TS 34.229-1 [35]. MTSI MT video call for EPS.
4.5A.9.4
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7.
ETSI
U-S
<--
Message Sequence
Message
RRC: Paging (PCCH)
-->
RRCConnectionRequest
<--->
RRC: RRCConnectionSetup
RRC: RRCConnectionSetupComplete
NAS: SERVICE REQUEST
<--
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: RRCConnectionReconfiguration
-->
RRC:
RRCConnectionReconfigurationComplet
e
-
-
<--
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
-
RRC: ULInformationTransfer
NAS:ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
RRC: ULInformationTransfer
NAS:ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
-
-
-
-->
3GPP TS 36.508 version 15.5.0 Release 15
327
ETSI TS 136 508 V15.5.0 (2019-07)
4.5A.10 Generic Test Procedure for IMS MO speech and aSRVCC in EUTRA
4.5A.10.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2).
4.5A.10.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.10.3
328
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5A.10.3-1: EUTRA/EPS signalling for IMS MO speech to alerting state
St
1
2
3
4
5
6
7
-
8
9-11
12
13
14
Procedure
U-S
-->
Make the UE attempt an IMS speech call
The UE transmits an RRCConnectionRequest message
with ' establishmentCause' set to ' mo-Data '.
SS transmit an RRCConnectionSetup message.
The UE transmits an RRCConnectionSetupComplete
message to confirm the successful completion of the
connection establishment and to initiate the session
management procedure by including the SERVICE
REQUEST message.
The SS transmits a SecurityModeCommand message
to activate AS security.
The UE transmits a SecurityModeComplete message
and establishes the initial security configuration.
The SS configures a new data radio bearer, associated
with the default EPS bearer context.
The RRCConnectionReconfiguration message is using
condition SRB2-DRB(1, 0). The DRB associated with
default EPS bearer context obtained during the attach
procedure is established
EXCEPTION: In parallel to the events described in
steps 8 below, the behaviour in table 4.5A.10.3-2
occurs. Initiate MTSI MO speech.
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer context.
Steps 3-4 expected sequence defined in annex C.21 of
TS 34.229-1 [35]. MTSI MO speech call for EPS.
The SS configures a new RLC-UM data radio bearer
with condition DRB (0,1), associated with the dedicated
EPS bearer context. RRCConnectionReconfiguration
message contains the ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message. EPS bearer
context #4 (QCI 1) according to table 6.6.2-1:
Reference dedicated EPS bearer contexts.
EXCEPTION: In parallel to the events described in
steps 13-14 below, the behaviour in table 4.5A.10.3-3
occurs. MTSI MO speech call to alerting state.
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the dedicated EPS bearer.
RRCConnectionRequest
<--->
RRC: RRCConnectionSetup
RRC: RRCConnectionSetupComplete
NAS: SERVICE REQUEST
<--
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: RRCConnectionReconfiguration
-
-->
<--
-
The UE transmits an ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT message.
Message Sequence
Message
-
RRC:
RRCConnectionReconfigurationComplet
e
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
-
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
RRC: ULInformationTransfer
NAS:ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
Table 4.5A.10.3-2: Parallel behaviour
St
1
Procedure
Step 2 expected sequence defined in annex
C.21 of TS 34.229-1 [35]. UE sends INVITE.
U-S
-
ETSI
Message Sequence
Message
-
3GPP TS 36.508 version 15.5.0 Release 15
329
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.10.3-3: Parallel behaviour
St
1-7
Procedure
Steps 5-11 expected sequence defined in
annex C.21 of TS 34.229-1 [35]. MTSI MO
speech call to alerting state for EPS.
4.5A.10.4
U-S
-
Message Sequence
Message
-
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7.
4.5A.11 Generic Test Procedure for IMS MO add video establishment in EUTRA
4.5A.11.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall execute 4.5A.6.
4.5A.11.2
Definition of system information messages
The default system information messages are used.
4.5A.11.3
Procedure
Table 4.5A.11.3-1: EUTRA/EPS signalling for IMS MO add video
St
1
2-4
5
-
6
7
Procedure
Make the UE attempt add IMS video to the voice call.
Steps 2-4 expected sequence defined in expected
sequence test case 17.1.4 of TS 34.229-1 [35]. MO
Speech, add video remove video.
The SS configures a new RLC-UM data radio bearer
with condition DRB (0,1), associated with the dedicated
EPS bearer context. RRCConnectionReconfiguration
message contains the ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message. EPS bearer
context #3 (QCI 2) according to table 6.6.2-1:
Reference dedicated EPS bearer contexts.
EXCEPTION: In parallel to the events described in
steps 6-7 below, the behaviour in table 4.5A.11.3-2
occurs. (IMS MTSI MO video call establishment).
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the dedicated EPS bearer. EPS bearer
context #3 (QCI 2) according table to 6.6.2-1:
Reference dedicated EPS bearer contexts.
The UE transmits an ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT message for the first
bearer.
ETSI
U-S
-
<--
-
Message Sequence
Message
-
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
-
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
RRC: ULInformationTransfer
NAS:ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
3GPP TS 36.508 version 15.5.0 Release 15
330
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.11.3-2: Parallel behaviour
St
1-6
Procedure
Steps 5-10 expected sequence defined in test
case 17.1.4 of TS 34.229-1 [35]. MO Speech,
add video remove video.
4.5A.11.4
U-S
-
Message Sequence
Message
-
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7.
4.5A.12 Generic Test Procedure for IMS MT add video establishment in EUTRA
4.5A.12.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall execute 4.5A.7.
4.5A.12.2
Definition of system information messages
The default system information messages are used.
4.5A.12.3
Procedure
Table 4.5A.12.3-1: EUTRA/EPS signalling for IMS MT add video
St
1-3b
4
5
6
7-8
9-12
Procedure
Steps 1-5 expected sequence defined in expected
sequence test case 17.2.4 of TS 34.229-1 [35]. MT
Speech, add video remove video.
The SS configures a new RLC-UM data radio bearer
with condition DRB (0,1), associated with the dedicated
EPS bearer context. RRCConnectionReconfiguration
message contains the ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message. EPS bearer
context #3 (QCI 2) according to table 6.6.2-1:
Reference dedicated EPS bearer contexts.
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the dedicated EPS bearer. EPS bearer
context #3 (QCI 2) according table to 6.6.2-1:
Reference dedicated EPS bearer contexts.
The UE transmits an ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT message for the first
bearer.
Void
Steps 6-9 expected sequence defined in test case
17.2.4 of TS 34.229-1 [35], MT Speech, add video
remove video.
ETSI
U-S
-
Message Sequence
Message
-
<--
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
-
RRC: ULInformationTransfer
NAS:ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
-
-
-
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.12.4
331
ETSI TS 136 508 V15.5.0 (2019-07)
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7.
4.5A.13 Void
4.5A.14 Generic Test Procedure for IMS XCAP establishment in EUTRA
4.5A.14.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2).
-
If pc_XCAP_only_APN==true then the UE is connected to the IMS PDN only
-
else the UE is connected to the IMS PDN and the Internet PDN which is used for XCAP signalling.
4.5A.14.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.14.3
332
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5A.14.3-1: EUTRA/EPS signalling for XCAP
St
1
2
3
4
5
6
7
8
Procedure
Make the UE attempt XCAP signalling.
The UE transmits an RRCConnectionRequest message
with ' establishmentCause' set to 'mo-Data '.
SS transmit an RRCConnectionSetup message.
The UE transmits an RRCConnectionSetupComplete
message to confirm the successful completion of the
connection establishment and to initiate the session
management procedure by including the SERVICE
REQUEST message.
The SS transmits a SecurityModeCommand message
to activate AS security.
The UE transmits a SecurityModeComplete message
and establishes the initial security configuration.
The SS configures a new data radio bearer, associated
with the default EPS bearer context.
The RRCConnectionReconfiguration message is using
condition SRB2-DRB(1, 0) in case of
pc_XCAP_only_APN==true or using condition SRB2DRB(2, 0) in case of
pc_XCAP_over_Internet_APN==true. The DRBs
associated with the respective default EPS bearer
context obtained during the attach procedure are
established
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer context.
EXCEPTION:
IF pc_XCAP_only_APN THEN
additional PDN connectivity shall be established as
specified in TS 36.508 subclause 4.5A.16 (condition:
NOT ADD_IMS)
4.5A.14.4
U-S
-->
Message Sequence
Message
RRCConnectionRequest
<--->
RRC: RRCConnectionSetup
RRC: RRCConnectionSetupComplete
NAS: SERVICE REQUEST
<--
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: RRCConnectionReconfiguration
-->
RRC:
RRCConnectionReconfigurationComplet
e
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7.
4.5A.15 Generic Test Procedure for EPS Bearer Deactivation
4.5A.15.1
Initial conditions
The EPS bearer to be deactivated has been established before. The EPS bearer has to be specified.
4.5A.15.2
Definition of system information messages
The system information messages applicable in the test case are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.15.3
333
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5A.15.3-1: Procedure for EPS Bearer Deactivation
Step
1
-
2
3
Procedure
The SS transmits an
RRCConnectionReconfiguration message to
deactivate an EPS bearer.
EXCEPTION: In parallel to the event
described in step2 the step specified in Table
4.5A.15.3-2 should take place.
The UE transmits an
RRCConnectionReconfigurationComplete
message to confirm the deactivation of EPS
bearer.
Void
U-S
<--
-
-->
-
Message Sequence
Message
RRC: RRCConnectionReconfiguration
NAS: DEACTIVATE EPS BEARER CONTEXT
REQUEST
-
RRC: RRCConnectionReconfigurationComplete
-
Table 4.5A.15.3-2: Procedure for EPS Bearer Deactivation (parallel behaviour)
Step
1
Procedure
The UE transmits an ULInformationTransfer
message to accept deactivation of the EPS
bearer.
4.5A.15.4
U-S
-->
Message Sequence
Message
RRC: ULInformationTransfer
NAS: DEACTIVATE EPS BEARER CONTEXT
ACCEPT
Specific message contents
Table 4.5A.15.4-1: Message DEACTIVATE EPS BEARER CONTEXT REQUEST (step 1, Table 4.5A.15.31)
Derivation path: Table 4.7.3-12 and table 4.6.1-8 with condition and condition NETWORK-INITIATED
Information Element
Value/Remark
Comment
EPS bearer identity
EPS bearer identity
Same value as in
the activation
message.
ESM cause
00100100
regular
deactivation
Condition
Table 4.5A.15.4-2: Message DEACTIVATE EPS BEARER CONTEXT ACCEPT (step 2, Table 4.5A.15.31)
Derivation Path:Table 4.7.3-11
Information Element
EPS bearer identity
Value/remark
EPS bearer identity
Procedure transaction identity
0
ETSI
Comment
The same value
as the value set in
DEACTIVATE
EPS BEARER
CONTEXT
REQUEST
message.
No procedure
transaction
identity assigned
Condition
3GPP TS 36.508 version 15.5.0 Release 15
334
ETSI TS 136 508 V15.5.0 (2019-07)
4.5A.15A Generic Test Procedure for User or Network Initiated EPS Bearer
Deactivation
4.5A.15A.1 Initial conditions
The EPS bearer to be deactivated has been established before. The EPS bearer has to be specified.
4.5A.15A.2 Definition of system information messages
The system information messages applicable in the test case are used.
4.5A.15A.3 Procedure
Table 4.5A.15A.3-1: Procedure for EPS Bearer Deactivation
Step
Procedure
Message Sequence
Message
U-S
-
1Aa
1
-
2
EXCEPTION: Step 1Aa describes behaviour
that depends on UE
capabilities/configuration; the "lower case
letter" identifies a step sequence that takes
place if one of those is supported/configured.
The SS shall wait up to 5s for the UE to
trigger the PDN Disconnect procedure.
NOTE: The specified wait period of 5s is a
working assumption to facilitate test case
implementation.
The UE transmits a PDN DISCONNECT
REQUEST
The SS transmits an
RRCConnectionReconfiguration message to
deactivate an EPS bearer.
EXCEPTION: In parallel to the event
described in step2 the step specified in Table
4.5A.15A.3-2 should take place.
The UE transmits an
RRCConnectionReconfigurationComplete
message to confirm the deactivation of EPS
bearer.
-
-->
<--
-
-->
-
RRC: ULInformationTransfer
PDN DISCONNECT REQUEST
RRC: RRCConnectionReconfiguration
NAS: DEACTIVATE EPS BEARER CONTEXT
REQUEST
-
RRC: RRCConnectionReconfigurationComplete
Table 4.5A.15A.3-2: Procedure for EPS Bearer Deactivation (parallel behaviour)
Step
1
Procedure
The UE transmits an ULInformationTransfer
message to accept deactivation of the EPS
bearer.
U-S
-->
ETSI
Message Sequence
Message
RRC: ULInformationTransfer
NAS: DEACTIVATE EPS BEARER CONTEXT
ACCEPT
3GPP TS 36.508 version 15.5.0 Release 15
335
ETSI TS 136 508 V15.5.0 (2019-07)
4.5A.15A.4 Specific message contents
Table 4.5A.15A.4-1: Message DEACTIVATE EPS BEARER CONTEXT REQUEST (step 1, Table
4.5A.15.3-1)
Derivation path: Table 4.7.3-12 and table 4.6.1-8 with condition and condition NETWORK-INITIATED
Information Element
Value/Remark
Comment
EPS bearer identity
EPS bearer identity
Same value as in
the activation
message.
ESM cause
00100100
regular
deactivation
Condition
Table 4.5A.15A.4-2: Message DEACTIVATE EPS BEARER CONTEXT ACCEPT (step 2, Table 4.5A.15.31)
Derivation Path: Table 4.7.3-11
Information Element
EPS bearer identity
Value/remark
EPS bearer identity
Procedure transaction identity
0
Comment
The same value
as the value set in
DEACTIVATE
EPS BEARER
CONTEXT
REQUEST
message.
No procedure
transaction
identity assigned
Condition
4.5A.16 Generic Test Procedure to establish additional PDN connectivity
The same assumptions and definitions apply as in clause 4.5.2and in addition:
Condition
ADD_IMS
4.5A.16.1
Explanation
true if this procedure is part of the initial registration (PDN2_IMS==true according to definitions in
clause 4.5.2);
false for all other cases
Initial conditions
System Simulator:
-
1 cell, default parameters.
-
The procedure shall be performed under ideal radio conditions as defined in clause 5
User Equipment:
-
The UE is in Registered, RRC_CONNECTED state (State 2).
4.5A.16.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.16.3
336
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5A.16.3-1: Establishment of additional PDN connectivity
St
1
2
3
-
-
4
Procedure
The UE transmits a PDN CONNECTIVITY REQUEST
message to request an additional PDN.
The SS configures a new data radio bearer, associated
with the additional default EPS bearer context.
RRCConnectionReconfiguration message contains the
ACTIVATE DEFAULT EPS BEARER CONTEXT
REQUEST message.
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of additional default bearer.
EXCEPTION: In parallel to the event described in step
4 below, if initiated by the UE the generic procedure for
IP address allocation in the U-plane specified in TS
36.508 subclause 4.5A.1 takes place performing IP
address allocation in the U-plane.
EXCEPTION: IF ADD_IMS THEN in parallel to the
event described in step 4 below the generic procedure
for IMS signalling in the U-plane specified in TS 36.508
subclause 4.5A.3 takes place if requested by the UE
The UE transmits an ACTIVATE DEFAULT EPS
BEARER CONTEXT ACCEPT message.
4.5A.16.4
U-S
-->
<--
Message Sequence
Message
RRC: ULInformationTransfer
NAS: PDN CONNECTIVITY REQUEST
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEFAULT EPS BEARER
CONTEXT REQUEST
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
RRC: ULInformationTransfer
NAS:ACTIVATE DEFAULT EPS
BEARER CONTEXT ACCEPT
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7 with the exceptions below.
Table 4.5A.16.4-1: PDN CONNECTIVITY REQUEST (step 1)
Derivation Path: Table 4.7.3-20
Information Element
Access point name
Value/remark
Any allowed value
Comment
The UE includes a
new APN.
Condition
Table 4.5A.16.4-2: Message ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST (step 2)
Derivation path:
Table 4.7.3-6 with condition IMS_PDN_ConnEstab for ADD_IMS and NOT IMS_PDN_ConnEstab else and
table 4.6.1-8 with condition AM-DRB-ADD(1) for ADD_IMS or with condition AM-DRB-ADD(8) else
Information Element
Value/Remark
Comment
Condition
EPS bearer identity
'0101'B
arbitrary value
ADD_IMS
used for PDN
connectivity being
maintained during
the test case
EPS bearer identity
'1100'B
arbitrary value
NOT
used for additional ADD_IMS
non-IMS PDN
connectivity
Procedure transaction identity
PTI-1
SS re-uses the
particular PTI
defined by UE for
this present
additional PDN
connectivity
request procedure
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
337
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.16.4-3: Message ACTIVATE DEFAULT EPS BEARER CONTEXT ACCEPT (step 4)
Derivation path: Table 4.7.3-4
Information Element
EPS bearer identity
Procedure transaction identity
Value/Remark
(same value as used in
step 2)
0
Comment
Condition
No procedure
transaction
identity assigned
4.5A.17 Generic Test Procedure for user initiated release of additional PDN
connectivity
4.5A.17.1
Initial conditions
System Simulator:
-
1 cell, default parameters.
-
The procedure shall be performed under ideal radio conditions as defined in clause 5
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2) with connectivity at least to two PDNs
4.5A.17.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.17.3
338
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5A.17.3-1: Release of additional PDN connectivity
St
1
2
3
-
4a1
4b1
5
6
7
8
9
10
11
12
Procedure
Cause the UE to request disconnection from the
additional PDN (see Note 1)
The UE transmits an RRCConnectionRequest
SS transmit an RRCConnectionSetup message.
EXCEPTION: Steps 4a1 to 4b1 describe behaviour
which depends on earlier network indication of
supported features.
IF the network indicated support of EXTENDED
SERVICE REQUEST for packet services in the
preceding ATTACH ACCEPT message, THEN the UE
transmits an RRCConnectionSetupComplete message
to confirm the successful completion of the connection
establishment and to initiate the session management
procedure by including the EXTENDED SERVICE
REQUEST message
ELSE, the UE transmits an
RRCConnectionSetupComplete message to confirm
the successful completion of the connection
establishment and to initiate the session management
procedure by including the SERVICE REQUEST
message.
The SS transmits a SecurityModeCommand message
to activate AS security.
The UE transmits a SecurityModeComplete message
and establishes the initial security configuration.
The SS transmits a RRCConnectionReconfiguration
message to establish SRB2 and DRBs associated with
all default EPS bearer contexts
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of SRB2 and DRBs
associated with all default EPS bearer contexts.
The UE transmits a PDN DISCONNECT REQUEST
U-S
-
The SS transmits a DEACTIVATE EPS BEARER
CONTEXT REQUEST message included in an
RRCConnectionReconfiguration message.
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the release of the bearer.
The UE transmits a DEACTIVATE EPS BEARER
CONTEXT ACCEPT message.
Message Sequence
Message
-
-->
<--
RRCConnectionRequest
RRC: RRCConnectionSetup
-
-->
RRC: RRCConnectionSetupComplete
NAS: EXTENDED SERVICE REQUEST
-->
RRC: RRCConnectionSetupComplete
NAS: SERVICE REQUEST
<--
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: RRCConnectionReconfiguration
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
RRC: ULInformationTransfer
PDN DISCONNECT REQUEST
RRC: RRCConnectionReconfiguration
NAS: DEACTIVATE EPS BEARER
CONTEXT REQUEST
RRC:
RRCConnectionReconfigurationComplet
e
RRC: ULInformationTransfer
DEACTIVATE EPS BEARER CONTEXT
ACCEPT
RRC: RRCConnectionRelease
<--
-->
-->
The SS transmits an RRCConnectionRelease message
<-to release RRC connection
NOTE 1: The request to disconnect from a PDN may be performed by MMI or AT command; in any case the EPS
bearer identity of the Default EPS Bearer of the PDN to be released needs to be handed over to the UE
13
4.5A.17.4
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7 with the exceptions below.
Table 4.5A.17.4-1: RRCConnectionReconfiguration (step 7)
Derivation path: 36.508 table 4.6.1-8 using condition SRB2-DRB(2, 0)
NOTE: The bid for the AM DRBs shall be 1 and 8 instead of 1 and 2.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
339
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.17.4-2: PDN DISCONNECT REQUEST (step 9)
Derivation Path: TS 36.508 Table 4.7.3-22
Information Element
EPS bearer identity
Value/remark
‘0000’
Procedure transaction identity
PTI-1
Linked EPS bearer identity
(bearer identity as
handed over at step 1)
Comment
"no EPS bearer
identity assigned"
UE assigns a
particular PTI not
yet used between
1 and 254
Condition
Table 4.5A.17.4-3: RRCConnectionReconfiguration (step 10)
Derivation path: 36.508 table 4.6.1-8 using condition DRB-REL(8)
Table 4.5A.17.4-4: DEACTIVATE EPS BEARER CONTEXT REQUEST (step 10)
Derivation Path: TS 36.508 Table 4.7.3-12
Information Element
EPS bearer identity
Procedure transaction identity
Value/remark
(same as in Linked EPS
bearer identity of step 9)
PTI-1
ESM cause
00100100
Comment
Condition
SS re-uses the
particular PTI
defined by UE for
this present PDN
disconnection
procedure.
regular
deactivation
UEINITIATED
Table 4.5A.17.4-5: DEACTIVATE EPS BEARER CONTEXT ACCEPT (step 12)
Derivation Path: TS 36.508 Table 4.7.3-11
Information Element
EPS bearer identity
Procedure transaction identity
Value/remark
(same as in
DEACTIVATE EPS
BEARER CONTEXT
REQUEST of step 10)
0
Comment
The same value
as the value set in
DEACTIVATE
EPS BEARER
CONTEXT
REQUEST
message.
No procedure
transaction
identity assigned
Condition
4.5A.18 Generic Test Procedure for network initiated release of additional
PDN connectivity
4.5A.18.1
Initial conditions
System Simulator:
-
1 cell, default parameters.
-
The procedure shall be performed under ideal radio conditions as defined in clause 5
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2) with connectivity at least to two PDNs
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.18.2
340
ETSI TS 136 508 V15.5.0 (2019-07)
Definition of system information messages
The default system information messages are used.
4.5A.18.3
Procedure
Table 4.5A.18.3-1: Release of additional PDN connectivity
St
Procedure
Message Sequence
Message
U-S
1-7
8
9
10
11
12
13
Steps 1 to 7 of the generic radio bearer establishment
procedure (TS 36.508 4.5.3.3-1)
The SS transmits a RRCConnectionReconfiguration
message to establish SRB2 and DRBs associated with
all default EPS bearer contexts
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of SRB2 and DRBs
associated with all default EPS bearer contexts.
SS releases the PDN connectivity by transmitting a
RRCConnectionReconfiguration containing a
DEACTIVATE EPS BEARER CONTEXT REQUEST
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the release of the bearer.
The UE transmits a DEACTIVATE EPS BEARER
CONTEXT ACCEPT message.
The SS transmits an RRCConnectionRelease message
to release RRC connection
4.5A.18.4
<--
RRC: RRCConnectionReconfiguration
-->
RRC:
RRCConnectionReconfigurationComplet
e
<--
RRC: RRCConnectionReconfiguration
NAS: DEACTIVATE EPS BEARER
CONTEXT REQUEST
RRC:
RRCConnectionReconfigurationComplet
e
DEACTIVATE EPS BEARER CONTEXT
ACCEPT
RRC: RRCConnectionRelease
-->
-->
<--
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7 with the exceptions below.
Table 4.5A.18.4-1: RRCConnectionReconfiguration (step 8)
Derivation path: 36.508 table 4.6.1-8 using condition SRB2-DRB(2, 0)
NOTE: The bid for the AM DRBs shall be 1 and 8 instead of 1 and 2.
Table 4.5A.18.4-2: RRCConnectionReconfiguration (step 10)
Derivation path: 36.508 table 4.6.1-8 using condition DRB-REL(8)
Table 4.5A.18.4-3: DEACTIVATE EPS BEARER CONTEXT REQUEST (step 10)
Derivation Path: TS 36.508 Table 4.7.3-12
Information Element
EPS bearer identity
ESM cause
Value/remark
(identity of default EPS
bearer associated with
the PDN to be released)
00011010
ETSI
Comment
Insufficient
resources
Condition
3GPP TS 36.508 version 15.5.0 Release 15
341
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.18.4-4: DEACTIVATE EPS BEARER CONTEXT ACCEPT (step 12)
Derivation Path: TS 36.508 Table 4.7.3-11
Information Element
EPS bearer identity
Procedure transaction identity
Value/remark
(same as in
DEACTIVATE EPS
BEARER CONTEXT
REQUEST of step 10)
0
Comment
The same value
as the value set in
DEACTIVATE
EPS BEARER
CONTEXT
REQUEST
message.
No procedure
transaction
identity assigned
Condition
4.5A.19 Generic Test Procedure for IMS MO speech call establishment in EUTRA / EVS
4.5A.19.1
Initial conditions
See clause 4.5A.6.1.
4.5A.19.2
Definition of system information messages
The default system information messages are used.
4.5A.19.3
Procedure
Table 4.5A.19.3-1: EUTRA/EPS signalling for IMS MO speech call / EVS
St
Procedure
Message Sequence
Message
U–S
1-7
-
8
9-11
12
-
13
14
Same as table 4.5A.6.3-1, steps 1-7.
EXCEPTION: In parallel to the events described in
steps 8 below, the behaviour in table 4.5A.19.3-2
occurs. (IMS MTSI MO speech call establishment)
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer context.
Steps 3-4 expected sequence defined in annex C.44 of
TS 34.229-1 [35]. MTSI MO speech call for EPS / EVS.
The SS configures a new RLC-UM data radio bearer
with condition DRB (0,1), associated with the dedicated
EPS bearer context. RRCConnectionReconfiguration
message contains the ACTIVATE DEDICATED EPS
BEARER CONTEXT REQUEST message. EPS bearer
context #4 (QCI 1) according to table 6.6.2-1:
Reference dedicated EPS bearer contexts.
EXCEPTION: In parallel to the events described in
steps 13-14 below, the behaviour in table 4.5A.19.3-3
occurs. (IMS MTSI MO speech call establishment)
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the dedicated EPS bearer.
The UE transmits an ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT message.
ETSI
-
-->
<--
-
-
RRC:
RRCConnectionReconfigurationComplet
e
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
-
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
RRC: ULInformationTransfer
NAS:ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
3GPP TS 36.508 version 15.5.0 Release 15
342
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.19.3-2: Parallel behaviour
St
1
Procedure
Step 2 expected sequence defined in annex
C.44 of TS 34.229-1 [35]. UE sends INVITE.
U-S
-
Message Sequence
Message
-
Table 4.5A.19.3-3: Parallel behaviour
St
1-9
Procedure
Steps 5-13 expected sequence defined in
annex C.44 of TS 34.229-1 [35]. MTSI MO
speech call for EPS / EVS.
4.5A.19.4
U-S
-
Message Sequence
Message
-
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7.
4.5A.20 Generic Test Procedure for IMS MT speech call establishment in EUTRA / EVS
4.5A.20.1
Initial conditions
See clause 4.5A.6.1.
4.5A.20.2
Definition of system information messages
The default system information messages are used.
4.5A.20.3
Procedure
Table 4.5A.20.3-1: EUTRA/EPS signalling for IMS MT speech call / EVS
St
Procedure
Message Sequence
Message
U–S
1-8
911b
1214
Same as table 4.5A.7.3-1, steps 1-8.
Steps 1-6 expected sequence defined in annex C.45 of
TS 34.229-1 [35], MTSI MT speech call for EPS / EVS.
Same as table 4.5A.7.3-1, steps 13-15.
1516
1725
26
-
-
Void
-
-
Steps 7-15 expected sequence defined in annex C.45
of TS 34.229-1 [35], MTSI MT speech call for EPS /
EVS.
Void
-
-
-
-
4.5A.20.4
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
343
ETSI TS 136 508 V15.5.0 (2019-07)
4.5A.21 Generic Test Procedure for IMS MO Customized Alerting Tones and
speech establishment in E-UTRA
4.5A.21.1
Initial conditions
See clause 4.5A.6.1
4.5A.21.2
Definition of system information messages
The default system information messages are used.
4.5A.21.3
Procedure
Table 4.5A.21.3-1: EUTRA/EPS signalling for IMS MO CAT and speech call
St
Procedure
1-12
-
See table 4.5A.6.3-1, steps 1-12
EXCEPTION: In parallel to the events described in
steps 13-14 below, the behaviour in table 4.5A.21.3-2
occurs. (IMS MTSI MO CAT and speech call
establishment)
13-14
See table 4.5A.6.3-1, steps 13-14
Message Sequence
Message
U-S
-
-
-
-
Table 4.5A.21.3-2: Parallel behaviour
St
114
Procedure
Steps 5-18 expected sequence defined in
20.1.4 of TS 34.229-1 [35]. MTSI MO CAT and
speech call for EPS.
4.5A.21.4
U-S
-
Message Sequence
Message
-
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7.
4.5A.22 Communication with the ProSe Function: Initial Access
4.5A.22.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered, Idle Mode state (State 2).
4.5A.22.2
Definition of system information messages
The default system information messages are used.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.22.3
344
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
The procedure is only applicable for pc_Provide_ProSe == true.
The HTTP signalling between the UE and the ProSe function is done over TLS i.e. the UE connects to TCP port 443
(HTTPS) and starts TLS handshake.
Table 4.5A.22.3-1: Communication with the ProSe Function
St
Procedure
U-S
1
2
3
4
5
6
7
810
-
11
Message Sequence
Message
RRCConnectionRequest
The UE transmits an RRCConnectionRequest message
with ' establishmentCause' set to 'mo-Data '.
SS transmit an RRCConnectionSetup message.
The UE transmits an RRCConnectionSetupComplete
message to confirm the successful completion of the
connection establishment and to initiate the session
management procedure by including the SERVICE
REQUEST message.
The SS transmits a SecurityModeCommand message
to activate AS security.
The UE transmits a SecurityModeComplete message
and establishes the initial security configuration.
The SS configures a new data radio bearer, associated
with the default EPS bearer context.
The RRCConnectionReconfiguration message is using
condition SRB2-DRB(1, 0). The DRB associated with
default EPS bearer context obtained during the attach
procedure is established
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer context.
Steps 1-3 of procedure 4.5A.16.3.
-->
-
-
EXCEPTION: In parallel to the event described in step
11 below, the behaviour described in Table 4.5A.22.3-2
takes place.
The UE transmits an ACTIVATE DEFAULT EPS
BEARER CONTEXT ACCEPT message.
-
-
ETSI
-->
RRC: RRCConnectionSetup
RRC: RRCConnectionSetupComplete
NAS: SERVICE REQUEST
<--
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: RRCConnectionReconfiguration
-->
RRC:
RRCConnectionReconfigurationComplet
e
<--
-->
RRC: ULInformationTransfer
NAS:ACTIVATE DEFAULT EPS
BEARER CONTEXT ACCEPT
3GPP TS 36.508 version 15.5.0 Release 15
345
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.22.3-2: Parallel behaviour
St
-
1a1
2
3
4-7
8
9
-
10a
1
10a
2
10a
3
10b
1
10b
2
10c
1
10c
2
10d
1
10d
2
Procedure
EXCEPTION: Step 1a1 describes behaviour
that depends on UE configuration; the "lower
case letter" identifies a step sequence that
take place if the UE does not have a
preconfigured IP address.
If initiated by the UE the generic procedure
for IP address allocation in the U-plane
specified in TS 36.508 subclause 4.5A.1
takes place performing IP address allocation
in the U-plane.
The UE transmits a ClientHello message
including PSK-based ciphersuites.
The SS transmits the ServerHello,
ServerKeyExchange and ServerHelloDone
messages indicating GBA as required.
The generic procedure for GBA
authentication according TS 34.229-1 [43]
subclause C.29.2 (steps 1-4) takes place.
The UE transmits the ClientKeyExchange
including a PSK identity, ChangeCipherSpec
and Finished messages.
The SS transmits the ChangeCipherSpec
and Finished messages.
EXCEPTION: Steps 10a1 to 10d2 describe
behaviour which depends on the ProSe
Procedure being applied
IF ANNOUNCE/MONITOR REQUEST THEN
The UE transmits a
DISCOVERY_REQUEST message over the
PC3 (UE to ProSe Function) interface.
The SS transmits a
DISCOVERY_RESPONSE message over
the PC3 (UE to ProSe Function) interface.
The UE transmits a SidelinkUEInformation
message.
IF MATCH REPORT THEN
The UE transmits a MATCH_REPORT
message over the PC3 (UE to ProSe
Function) interface.
The SS transmits a MATCH_REPORT_ACK
message over the PC3 (UE to ProSe
Function) interface.
IF UEREGISTRATION THEN
The UE transmits an
UE_REGISTRATION_REQUEST message
over the PC3 (UE to ProSe Function)
interface.
The SS transmits an
APPLICATION_REGISTRATION_RESPON
SE message with a response-register.
IF USAGEINFOREPORT THEN
The UE transmits an
USAGE_INFORMATION_REPORT_LIST
message over the PC3ch (UE to ProSe
Function) interface.
SS sends
USAGE_INFORMATION_REPORT_LIST_R
ESPONSE message.
Message Sequence
Message
U-S
-
-
-
-
-->
TLS: ClientHello
<--
TLS: ServerHello
TLS: ServerKeyExchange
TLS: ServerHelloDone
-
-
-->
<--
TLS: ClientKeyExchange
TLS: ChangeCipherSpec
TLS: Finished
TLS: ChangeCipherSpec
TLS: Finished
-
-->
HTTP Request containing
DISCOVERY_REQUEST
<--
HTTP Response containing
DISCOVERY_RESPONSE
-->
SidelinkUEInformation
-->
HTTP Request containing
MATCH_REPORT
<--
HTTP Response containing
MATCH_REPORT_ACK
-->
HTTP Request containing
UE_REGISTRATION_REQUEST
<--
HTTP Response containing
UE_REGISTRATION_RESPONSE
-->
HTTP Request containing
USAGE_INFORMATION_REPORT_LIST
<--
HTTP Response containing
USAGE_INFORMATION_REPORT_LIST_RESPON
SE
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Condition
ANNOUNCE/MONITOR REQUEST
MATCH REPORT
UEREGISTRATION
USAGEINFOREPORT
4.5A.22.4
346
ETSI TS 136 508 V15.5.0 (2019-07)
Explanation
Steps applicable to Announce request procedure OR Monitor request
procedure
Steps applicable to Match report procedure
Steps applicable to EPC-level ProSe discovery / UE registration procedure
Steps applicable to usage information report list sending procedure.
Specific message contents
HTTP specific message contents shall be referred to clause 4.7E.
ProSe specific message contents shall be referred to clause 4.7F.
TLS specific message contents shall be referred to clause 4.7H.
Further specific message contents shall be referred to clause 4.6 and 4.7.
4.5A.22A Communication with the ProSe Function: Subsequent Access
4.5A.22A.1 Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE shall be in Registered Idle Mode state (State 2), or in state Generic RB Established (State 3).
-
The Communication with the ProSe Function: Initial Access in subclause 4.5A22 has taken place since the UE
was switched on.
4.5A.22A.2 Definition of system information messages
The default system information messages are used.
4.5A.22A.3 Procedure
The procedure is only applicable for pc_Provide_ProSe == true.
The HTTP signalling between the UE and the ProSe function is done over an already established TLS connection.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
347
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.22A.3-1: Communication with the ProSe Function
St
Procedure
Message Sequence
Message
U-S
-
1a1
1a
2
1a
3
1a
4
1a
5
1a
6
1a
7
210
10a
110d
2
EXCEPTION: Steps 1a1 to 1a7 describe behaviour that
depends on UE configuration; the "lower case letter"
identifies a step sequence that takes place if the UE is
in RRC_IDLE state.
The UE transmits an RRCConnectionRequest message
with ' establishmentCause' set to 'mo-Data '.
SS transmit an RRCConnectionSetup message.
-
-
-->
RRCConnectionRequest
<--
RRC: RRCConnectionSetup
The UE transmits an RRCConnectionSetupComplete
message to confirm the successful completion of the
connection establishment and to initiate the session
management procedure by including the SERVICE
REQUEST message.
The SS transmits a SecurityModeCommand message
to activate AS security.
The UE transmits a SecurityModeComplete message
and establishes the initial security configuration.
The SS configures two new data radio bearers,
associated with the two default EPS bearer contexts.
The RRCConnectionReconfiguration message is using
condition SRB2-DRB(2, 0).
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio
bearers, associated with the default EPS bearer
contexts.
Void
-->
RRC: RRCConnectionSetupComplete
NAS: SERVICE REQUEST
<--
RRC: SecurityModeCommand
-->
RRC: SecurityModeComplete
<--
RRC: RRCConnectionReconfiguration
-->
RRC:
RRCConnectionReconfigurationComplet
e
EXCEPTION: Steps 10a1 to 10d2 describe behaviour
which depends on the ProSe Procedure being applied
Steps 10a1-10d2 of Table 4.5A.22.3-2.
-
-
-
-
4.5A.22A.4 Specific message contents
HTTP specific message contents shall be referred to clause 4.7E.
ProSe specific message contents shall be referred to clause 4.7F.
Further specific message contents shall be referred to clause 4.6 and 4.7.
4.5A.23 Generic Test Procedure for IMS registration in EPC / WLAN
4.5A.23.1
Initial conditions
System Simulator:
-
WLAN Cell 27 according to Table 4.4.8-1 with condition IMSoWLAN.
User Equipment:
-
The UE is in state Switched OFF (state 1).
4.5A.23.2
Definition of system information messages
N/A
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.23.3
348
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5A.23.3-1: IMS registration in EPC / WLAN
St
Procedure
1
2
3
4
5-13
The UE is switched on
The UE associates with the WLAN AP and obtains the
local IP address
The UE performs a dynamic selection of ePDG using
DNS query
The UE establishes an IPsec tunnel using the IKEv2
protocol as defined in 3GPP TS 33.402 [55] clause
8.2.2, Figure 8.2.2-1.
The UE performs the IMS registration procedure
according TS 34.229-1 [43] subclause C.2c (steps 2-9).
4.5A.23.4
Message Sequence
Message
U-S
-
-
-
-
-
-
-
-
Specific message contents
None
4.5A.23A Generic Test Procedure for IPsec Tunnel Disconnection in EPC /
WLAN
4.5A.23A.1 Initial conditions
System Simulator:
-
WLAN Cell 27 according to Table 4.4.8-1 with condition IMSoWLAN.
User Equipment:
-
The UE has established an ePDG Tunnel.
4.5A.23A.2 Definition of system information messages
N/A
4.5A.23A.3 Procedure
Table 4.5A.23A.3-1: Generic Test Procedure for IPsec Tunnel Disconnection in EPC / WLAN
St
Procedure
U-S
1
Message Sequence
Message
The UE initiates a disconnection from the existing IPsec
tunnel as defined in 3GPP TS 24.302 [53] clause
7.2.4.1, which is acknowledged by the SS.
NOTE:
It is assumed that the WLAN AP association remains throughout the procedure.
4.5A.23A.4 Specific message contents
None
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
349
ETSI TS 136 508 V15.5.0 (2019-07)
4.5A.24 Generic Test Procedure for IMS emergency call establishment in
EPC / WLAN
4.5A.24.1
Initial conditions
System Simulator:
-
WLAN Cell 27 according to Table 4.4.8-1 with condition IMSoWLAN.
User Equipment:
-
The UE has selected an ePDG and is registered onto the IMS network according to clause 4.5A.23.
4.5A.24.2
Definition of system information messages
N/A
4.5A.24.3
Procedure
Table 4.5A.24.3-1: IMS emergency call establishment in EPC / WLAN
St
Procedure
U-S
-
1
2
3
Message Sequence
Message
The UE is triggered to initiate an emergency call
Void
The UE performs a dynamic selection of an ePDG that
supports emergency services using DNS query
4
The UE establishes an additional IPsec tunnel using the
IKEv2 protocol as defined in 3GPP TS 33.402 [55]
clause 8.2.2, Figure 8.2.2-1.
NOTE 1: It is assumed that the WLAN AP association remains throughout the procedure.
NOTE 2: This procedure is based on 3GPP Release 14.
4.5A.24.4
Specific message contents
None
4.5A.25 Generic Test Procedure for XCAP establishment in EPC / WLAN
This procedure is applicable only for the case when pc_WLAN_XCAP_without_PDN is set to false.
4.5A.25.1
Initial conditions
System Simulator:
-
WLAN Cell 27 according to Table 4.4.8-1 with condition IMSoWLAN.
User Equipment:
-
The UE has selected an ePDG and is registered onto the IMS network according to clause 4.5A.23.
4.5A.25.2
Definition of system information messages
N/A
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.5A.25.3
350
ETSI TS 136 508 V15.5.0 (2019-07)
Procedure
Table 4.5A.25.3-1: IMS XCAP establishment in EPC / WLAN
St
Procedure
Message Sequence
Message
U-S
1
2
Make the UE attempt XCAP signalling.
The UE establishes an additional PDN and IPsec tunnel
using the IKEv2 protocol as defined in 3GPP TS 33.402
[55] clause 8.2.2, Figure 8.2.2-1.
4.5A.25.4
-->
-
-
Specific message contents
N/A
4.5A.26 Generic Test Procedure for eCall over IMS establishment in EUTRA:
Normal Service
4.5A.26.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE is in state Registered, Idle Mode (State 2)
4.5A.26.2
Definition of system information messages
The default system information messages are used.
4.5A.26.3
Procedure
The establishment of eCall over IMS is assumed to always be mobile originated.
Note: The trigger to initiate MO call will be part of test case from where the generic procedure is called.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
351
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.26.3-1: EUTRA/EPS signalling for eCall over IMS
St
18a7
9
10
-
11
12
13
14
15
Procedure
Steps 3 to 10a7 of the generic radio bearer
establishment procedure from TS 36.508 subclause
4.5.3.3-3 are executed
The UE transmits a PDN CONNECTIVITY REQUEST
message to request an additional PDN, with 'Request
type' set to 'emergency ('0100'B)'.
The SS configures a new data radio bearer, associated
with the default EPS bearer context.
RRCConnectionReconfiguration message contains the
ACTIVATE DEFAULT EPS BEARER CONTEXT
REQUEST message. EPS bearer context #2 (QCI 5)
according to table 6.6.1-1: Reference default EPS
bearer context is used.
Note: The APN is set to the test APN defined for
emergency bearer services.
EXCEPTION: In parallel to the events described in
steps 11 to 15 below, the behaviour in table 4.5A.26.3-2
occurs. (Optional IP address allocation followed by IMS
emergency registration and eCall over IMS
establishment)
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer for emergency
call.
The UE transmits an ACTIVATE DEFAULT EPS
BEARER CONTEXT ACCEPT message.
Message Sequence
Message
-
U-S
-
-->
NAS: PDN CONNECTIVITY REQUEST
<--
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEFAULT EPS BEARER
CONTEXT REQUEST
-
-
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
RRC: ULInformationTransfer
NAS: ACTIVATE DEFAULT EPS
BEARER CONTEXT ACCEPT
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
The SS configures a new RLC-UM data radio bearer,
associated with the dedicated EPS bearer context.
RRCConnectionReconfiguration message contains the
ACTIVATE DEDICATED EPS BEARER CONTEXT
REQUEST message. EPS bearer context #4 (QCI 1)
according to table 6.6.2-1: Reference dedicated EPS
bearer contexts is used.
Note: the same PDN address is applicable because the
linked EPS bearer ID refers to the default EBC
allocated in step 2
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer for emergency
IMS signalling.
<--
-->
RRC:
RRCConnectionReconfigurationComplet
e
The UE transmits an ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT message.
-->
RRC: ULInformationTransfer
NAS: ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
352
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.26.3-2: Parallel behaviour
St
1
2-5
6-8
Procedure
EXCEPTION: Step 1 describes behaviour that
depends on the UE behaviour.
If initiated by the UE the generic procedure for
IP address allocation in the U-plane specified
in TS 36.508 subclause 4.5A.1 takes place
performing IP address allocation in the Uplane.
Steps 1-4 expected sequence defined in
annex C.20 of TS 34.229-1 [35]. Emergency
registration procedure is performed.
Steps 1-3 defined in annex C.47 of TS 34.2291 [35] Generic Test Procedure for NG eCall
setup.
4.5A.26.4
Message Sequence
Message
U-S
-
-
-
-
-
-
-
-
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7 with the exceptions below.
Table 4.5A.26.4-1: PDN CONNECTIVITY REQUEST (step 9, Table 4.5A.26.3-1)
Derivation Path: Table 4.7.3-20
Information Element
Request type
Access point name
Value/remark
‘0100’B
Not present or any value
Comment
Emergency
Condition
Table 4.5A.26.4-2: Message ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST (step 10, Table
4.5A.26.3-1)
Derivation path: Table 4.7.3-6 and table 4.6.1-8 with condition AM-DRB-ADD(2)
Information Element
Value/Remark
Access point name
sos
EPS QoS
According to reference
default EPS bearer
context #2 – in table
6.6.1-1
Comment
APN value as
recommended by
IR.88 clause 6.4
[56]
SS defines an
additional
dedicated EPS
QoS
Condition
Table 4.5A.26.4-3: Message ACTIVATE DEDICATED EPS BEARER CONTEXT REQUEST (step 13,
Table 4.5A.26.3-1)
Derivation path: Table 4.7.3-3 and table 4.6.1-8 with condition UM-DRB-ADD(3)
Information Element
Value/Remark
Linked EPS bearer identity
Default EBId-2 (same
value like in table
4.5A.4.4-1)
EPS QoS
According to reference
dedicated EPS bearer
context #1 - in table
6.6.2-1
TFT
According to reference
dedicated EPS bearer
context #1 - in table
6.6.2-1
ETSI
Comment
SS defines an
additional
dedicated EPS
QoS
Condition
3GPP TS 36.508 version 15.5.0 Release 15
353
ETSI TS 136 508 V15.5.0 (2019-07)
4.5A.27 Generic Test Procedure for eCall over IMS establishment in EUTRA:
eCall Only Support
4.5A.27.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4,
unless otherwise specified in the test case.
User Equipment:
-
The UE is in state Switched OFF (State 1).
4.5A.27.2
Definition of system information messages
The default system information messages are used.
4.5A.27.3
Procedure
The establishment of eCall over IMS is assumed to always be mobile originated.
Note: The generic procedure is defined as per TS 23.401 [24] clause 4.3.12.1.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
354
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.27.3-1: EUTRA/EPS signalling for eCall over IMS (eCall only Support)
St
1
2
3-18
19
20
-
21
22
23
24
25
Procedure
The UE is switched on and SS waits 15 sec to allow the
UE to camp on the serving cell and enter and remain in
substate EMM-DEREGISTERED.eCALL-INACTIVE.
Make the UE attempt an eCall (See Note 1)
Steps 1 to 16 of the generic test procedure for UE
registration sub clause 4.5.2.3.
The UE transmits a PDN CONNECTIVITY REQUEST
message to request an additional PDN, with 'Request
type' set to 'emergency ('0100'B)'.
The SS configures a new data radio bearer, associated
with the default EPS bearer context.
RRCConnectionReconfiguration message contains the
ACTIVATE DEFAULT EPS BEARER CONTEXT
REQUEST message. EPS bearer context #2 (QCI 5)
according to table 6.6.1-1: Reference default EPS
bearer context is used.
Note: The APN is set to the test APN defined for
emergency bearer services.
EXCEPTION: In parallel to the events described in
steps 21 to 25 below, the behaviour in table 4.5A.27.3-2
occurs. (Optional IP address allocation followed by IMS
emergency registration and eCall over IMS
establishment)
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer for emergency
call.
The UE transmits an ACTIVATE DEFAULT EPS
BEARER CONTEXT ACCEPT message.
Message Sequence
Message
U-S
-
-
-
-
-->
NAS: PDN CONNECTIVITY REQUEST
<--
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEFAULT EPS BEARER
CONTEXT REQUEST
-
-
-->
RRC:
RRCConnectionReconfigurationComplet
e
-->
RRC: ULInformationTransfer
NAS: ACTIVATE DEFAULT EPS
BEARER CONTEXT ACCEPT
RRC: RRCConnectionReconfiguration
NAS:
ACTIVATE DEDICATED EPS BEARER
CONTEXT REQUEST
The SS configures a new RLC-UM data radio bearer,
associated with the dedicated EPS bearer context.
RRCConnectionReconfiguration message contains the
ACTIVATE DEDICATED EPS BEARER CONTEXT
REQUEST message. EPS bearer context #4 (QCI 1)
according to table 6.6.2-1: Reference dedicated EPS
bearer contexts is used.
Note: the same PDN address is applicable because the
linked EPS bearer ID refers to the default EBC
allocated in step 2
The UE transmits an
RRCConnectionReconfigurationComplete message to
confirm the establishment of the new data radio bearer,
associated with the default EPS bearer for emergency
IMS signalling.
<--
-->
RRC:
RRCConnectionReconfigurationComplet
e
The UE transmits an ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT message.
-->
RRC: ULInformationTransfer
NAS: ACTIVATE DEDICATED EPS
BEARER CONTEXT ACCEPT
Note 1: The request to originate a manual or Automatic eCall may be performed by MMI or AT command.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
355
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.27.3-2: Parallel behaviour
St
1
2-5
6-8
Procedure
EXCEPTION: Step 1 describes behaviour that
depends on the UE behaviour.
If initiated by the UE the generic procedure for
IP address allocation in the U-plane specified
in TS 36.508 subclause 4.5A.1 takes place
performing IP address allocation in the Uplane.
Steps 1-4 expected sequence defined in
annex C.20 of TS 34.229-1 [35]. Emergency
registration procedure is performed.
Steps 1-3 defined in annex C47 of TS 34.2291 [35] Generic procedure for NG eCall Setup.
4.5A.27.4
Message Sequence
Message
U-S
-
-
-
-
-
-
-
-
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7 with the exceptions below.
Table 4.5A.27.4-1: PDN CONNECTIVITY REQUEST (step 19)
Derivation Path: Table 4.7.3-20
Information Element
Request type
Access point name
Value/remark
‘0100’B
Not present or any value
Comment
Emergency
Condition
Table 4.5A.27.4-2: Message ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST (step 20, Table
4.5A.27.3-1)
Derivation path: Table 4.7.3-6 and table 4.6.1-8 with condition AM-DRB-ADD(2)
Information Element
Value/Remark
Access point name
sos
EPS QoS
According to reference
default EPS bearer
context #2 – in table
6.6.1-1
Comment
APN value as
recommended by
IR.88 clause 6.4
[56]
SS defines an
additional
dedicated EPS
QoS
Condition
Table 4.5A.27.4-3: Message ACTIVATE DEDICATED EPS BEARER CONTEXT REQUEST (step 23,
Table 4.5A.27.3-1)
Derivation path: Table 4.7.3-3 and table 4.6.1-8 with condition UM-DRB-ADD(3)
Information Element
Value/Remark
Linked EPS bearer identity
Default EBId-2 (same
value like in table
4.5A.4.4-1)
EPS QoS
According to reference
dedicated EPS bearer
context #1 - in table
6.6.2-1
TFT
According to reference
dedicated EPS bearer
context #1 - in table
6.6.2-1
ETSI
Comment
SS defines an
additional
dedicated EPS
QoS
Condition
3GPP TS 36.508 version 15.5.0 Release 15
356
ETSI TS 136 508 V15.5.0 (2019-07)
4.5A.28 Generic Test Procedure for Converged IP Communications
establishment in EUTRA
4.5A.28.1
Initial conditions
System Simulator:
-
Parameters are set to the default parameters for the basic single cell environment, as defined in subclause 4.4.
User Equipment:
-
The UE is in state Switched OFF (state 1) according to [18].
4.5A.28.2
Definition of system information messages
N/A
4.5A.28.3
Procedure
Table 4.5A.28.3-1: Converged IP Communications service establishment in E-UTRA
St
Procedure
Message Sequence
Message
U-S
1
2-16
1720
The UE is switched on
Steps 2-16 of the generic procedure for UE registration
specified in TS 36.508 subclause 4.5.2.3 are
performed.
Steps 1-4 of the generic procedure to establish an
additional PDN Connection specified in TS 36.508
subclause 4.5A.16.
4.5A.28.4
-
-
Specific message contents
All specific message contents shall be referred to clause 4.6 and 4.7 with the exceptions below.
Table 4.5A.26.4-1: PDN CONNECTIVITY REQUEST (step 17)
Derivation Path: Table 4.7.3-20
Information Element
Access point name
Value/remark
Any allowed value
ETSI
Comment
The UE includes a
new APN.
Condition
3GPP TS 36.508 version 15.5.0 Release 15
357
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.5A.28.4-2: Message ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST (step 18)
Derivation path:
Table 4.6.1-8 with condition AM-DRB-ADD(1) for ADD_IMS or with condition AM-DRB-ADD(8) else
Information Element
Value/Remark
Comment
EPS bearer identity
'0101'B
arbitrary value
used for PDN
connectivity being
maintained during
the test case
EPS bearer identity
'1100'B
arbitrary value
used for additional
non-IMS PDN
connectivity
Procedure transaction identity
PTI-1
SS re-uses the
particular PTI
defined by UE for
this present
additional PDN
connectivity
request procedure
EPS QoS
See Reference default
EPS bearer context #2 in
table 6.6.1-1
Access point name
APN as provided in ESM
INFORMATION
RESPONSE or PDN
CONNECTIVITY
REQUEST
Condition
ADD_IMS_MultiMedia and SMS
Expression
pc_IMS AND
pc_Provide_IMS_as_second_APN
ADD_IMS_Advanced_Messaging pc_IMS AND
NOT pc_Provide_IMS_as_second_APN
Condition
ADD_IMS_
MultiMedia
and SMS
ADD_IMS_
Advanced_
Messaging
Explanation
UE performs IMS registration for
multi-media telephony and SMSoIP
first, and IMS registration for
advanced messaging services
second.
UE performs IMS registration for
advanced messaging services first,
and IMS registration for multi-media
telephony and SMSoIP second.
Table 4.5A.28.4-3: Message ACTIVATE DEFAULT EPS BEARER CONTEXT ACCEPT (step 20)
Derivation path: Table 4.7.3-4
Information Element
EPS bearer identity
Procedure transaction identity
Value/Remark
(same value as used in
step 2)
0
Comment
No procedure
transaction
identity assigned
4.5A.29 Generic Test Procedure for Converged IP Communications
establishment in EPC / WLAN
4.5A.29.1
Initial conditions
System Simulator:
-
WLAN Cell 27 according to Table 4.4.8-1 in [18].
User Equipment:
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
358
ETSI TS 136 508 V15.5.0 (2019-07)
The UE has selected an ePDG and is registered onto the IMS network according to 4.5A.23.
4.5A.29.2
Definition of system information messages
N/A
4.5A.29.3
Procedure
Table 4.5A.29.3-1: Converged IP Communications service establishment in EPC / WLAN
St
Procedure
U-S
-
1
Message Sequence
Message
The UE establishes an IPsec tunnel using the IKEv2
protocol as defined in 3GPP TS 33.402 [55] clause
8.2.2, Figure 8.2.2-1.
2-9
The UE performs the IMS registration procedure
according TS 34.229-1 [43] subclause C.2c (steps 2-9).
NOTE:
It is assumed that the WLAN AP association remains throughout the procedure.
4.5A.29.4
Specific message contents
FFS
4.6 Default RRC message and information elements contents
This clause contains the default values of common RRC messages and information elements, which unless indicated
otherwise in specific clauses of TS 36.521-1 [21], TS 36.521-3 [34], TS 36.523-1 [18] and other clauses in this
specification. All the messages and information elements are listed in alphabetical order.
4.6.1
–
Contents of RRC messages
CounterCheck
Table 4.6.1-0a: CounterCheck
Derivation Path: 36.331 clause 6.2.2
Information Element
CounterCheck ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE {
counterCheck-r8 SEQUENCE {
drb-CountMSB-InfoList
nonCriticalExtension SEQUENCE {}
Value/remark
RRCTransactionIdentifier-DL
Set according to specific
message content
Not present
}
}
}
}
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
359
ETSI TS 136 508 V15.5.0 (2019-07)
CounterCheckResponse
Table 4.6.1-0b: CounterCheckResponse
Derivation Path: 36.331 clause 6.2.2
Information Element
CounterCheckResponse ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
counterCheckResponse-r8 SEQUENCE {
drb-CountInfoList
nonCriticalExtension SEQUENCE {}
Value/remark
Comment
Condition
Comment
Condition
RRCTransactionIdentifier-UL
Set according to specific
message content
Not checked
}
}
}
–
CSFBParametersRequestCDMA2000
Table 4.6.1-1: CSFBParametersRequestCDMA2000
Derivation Path: 36.331 clause 6.2.2
Information Element
CSFBParametersRequestCDMA2000 ::=
SEQUENCE {
criticalExtensions CHOICE {
csfbParametersRequestCDMA2000-r8
SEQUENCE {
nonCriticalExtension SEQUENCE {}
}
}
}
–
Value/remark
Not checked
CSFBParametersResponseCDMA2000
Table 4.6.1-2: CSFBParametersResponseCDMA2000
Derivation Path: 36.331 clause 6.2.2
Information Element
CSFBParametersResponseCDMA2000 ::=
SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
csfbParametersResponseCDMA2000-r8
SEQUENCE {
rand
mobilityParameters
nonCriticalExtension SEQUENCE {}
Value/remark
RRCTransactionIdentifier-DL
Set according to specific
message content
Set according to specific
message content
Not present
}
}
}
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
360
ETSI TS 136 508 V15.5.0 (2019-07)
DLInformationTransfer
Table 4.6.1-3: DLInformationTransfer
Derivation Path: 36.331 clause 6.2.2
Information Element
DLInformationTransfer ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE {
dlInformationTransfer-r8 SEQUENCE {
dedicatedInfoType CHOICE {
dedicatedInfoNAS
}
nonCriticalExtension SEQUENCE {}
Value/remark
Comment
Condition
RRCTransactionIdentifier-DL
Set according to specific
message content
Not present
}
}
}
}
–
HandoverFromEUTRAPreparationRequest
Table 4.6.1-4: HandoverFromEUTRAPreparationRequest
Derivation Path: 36.331 clause 6.2.2
Information Element
HandoverFromEUTRAPreparationRequest ::=
SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE {
handoverFromEUTRAPreparationRequest-r8
SEQUENCE {
cdma2000-Type
rand
mobilityParameters
nonCriticalExtension SEQUENCE {}
Value/remark
RRCTransactionIdentifier-DL
type1XRTT
A random value,
generated by the SS
Set according to specific
message content
Not present
}
}
}
}
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
361
ETSI TS 136 508 V15.5.0 (2019-07)
LoggedMeasurementConfiguration
Table 4.6.1-4.0A: LoggedMeasurementConfiguration
Derivation Path: 36.331 clause 6.2.2
Information Element
LoggedMeasurementConfiguration-r10 ::=
SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE {
loggedMeasurementConfiguration-r10
SEQUENCE {
traceReference-r10 SEQUENCE {
plmn-Identity-r10 SEQUENCE {
mcc SEQUENCE (SIZE (3)) OF MCCNMC-Digit
mnc SEQUENCE (SIZE (2..3)) OF MCCNMC-Digit
}
traceId-r10
Value/remark
Comment
See table 4.4.2-2
See table 4.4.2-2
‘0EF’H
OCTET STRING
(SIZE (3))
}
traceRecordingSessionRef-r10
‘1A’H
tce-Id-r10
‘5’H
absoluteTimeInfo-r10
areaConfiguration-r10
loggingDuration-r10
Set to value
corresponding to the
absolute time when the
message is sent
Not present
min120
OCTET STRING
(SIZE (2))
OCTET STRING
(SIZE (1))
BIT STRING
(SIZE (48)), see
TS 36.331 clause
6.3.6 for format.
loggingInterval-r10
ms10240
nonCriticalExtension SEQUENCE {}
Not present
}
}
}
}
ETSI
ENUMERATED {
min10, min20,
min40, min60,
min90, min120,
spare2, spare1}
ENUMERATED {
ms1280, ms2560,
ms5120,
ms10240,
ms20480,
ms30720,
ms40960,
ms61440}
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
362
ETSI TS 136 508 V15.5.0 (2019-07)
MasterInformationBlock-SL
Table 4.6.1-4A0: MasterInformationBlock-SL
Derivation Path: 36.331 clause 6.5.2
Information Element
MasterInformationBlock-SL ::= SEQUENCE {
sl-Bandwidth-r12
tdd-ConfigSL-r12 SEQUENCE {
subframeAssignmentSL-r12
}
directFrameNumber-r12
Value/remark
=the value of the
corresponding field
included in the
preconfigured sidelink
parameters (i.e.
preconfigGeneral in SLPreconfiguration), Table
6.8.1.1-1
=the value of the
corresponding field
included in the
preconfigured sidelink
parameters (i.e.
preconfigGeneral in SLPreconfiguration, Table
6.8.1.1-1)
inCoverage-r12
according to the
subframe used to
transmit the SLSS
according to the
subframe used to
transmit the SLSS
TRUE
reserved-r12
0000000000000000000
directSubframeNumber-r12
Comment
}
ETSI
UE is in E-UTRAN
coverage
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
363
ETSI TS 136 508 V15.5.0 (2019-07)
MasterInformationBlock-SL-V2X
Table 4.6.1-4A1: MasterInformationBlock-SL-V2X
Derivation Path: 36.331 clause 6.5.2
Information Element
MasterInformationBlock-SL-V2X-r14 ::= SEQUENCE {
sl-Bandwidth-r14
tdd-ConfigSL-r14 SEQUENCE {
subframeAssignmentSL-r12
Value/remark
Comment
Condition
=the value of the
corresponding field
included in the
preconfigured sidelink
parameters (i.e. SL-V2XPreconfigFreqInfo-r14 in
SL-V2X-Preconfiguration,
Table 4.10.1.1-1)
=the value of the
corresponding field
included in the
preconfigured sidelink
parameters (i.e. SL-V2XPreconfigFreqInfo-r14 in
SL-V2X-Preconfiguration,
Table 4.10.1.1-1)
}
directFrameNumber-r14
according to the
subframe used to
transmit the SLSS
according to the
subframe used to
transmit the SLSS
TRUE
directSubframeNumber-r14
inCoverage-r14
reserved-r14
UE is in E-UTRAN
coverage
00000000000000000000
0000000
}
–
MBMSCountingRequest
Table 4.6.1-4AA: MBMSCountingRequest
Derivation Path: 36.331 clause 6.2.2
Information Element
MBMSCountingRequest-r10 ::= SEQUENCE {
countingRequestList-r10 SEQUENCE (SIZE (1..
maxServiceCount)) OF SEQUENCE {
tmgi-r10 SEQUENCE {
plmn-Id-r9 CHOICE{
plmn-Index-r9
}
serviceId-r9
}
}
lateNonCriticalExtension
nonCriticalExtension SEQUENCE {}
Value/remark
Comment
1
‘000000’O
Not present
Not present
}
ETSI
MBMS service ID
(TS 24.008 clause
10.5.6.13),
OCTET STRING
(SIZE (3))
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
364
ETSI TS 136 508 V15.5.0 (2019-07)
MBMSCountingResponse
Table 4.6.1-4AB: MBMSCountingResponse
Derivation Path: 36.331 clause 6.2.2
Information Element
MBMSCountingResponse-r10 ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE{
countingResponse-r10 OF SEQUENCE {
mbsfn-AreaIndex-r10
countingResponseList-r10 SEQUENCE (SIZE
(1... maxServiceCount)) OF SEQUENCE {
countingResponseService-r10
}
lateNonCriticalExtension
nonCriticalExtension SEQUENCE {}
}
}
}
}
–
Value/remark
Comment
Condition
Comment
Condition
Not present
0
Not present
Not present
MBMSInterestIndication
Table 4.6.1-4AC: MBMSInterestIndication
Derivation Path: 36.331 clause 6.2.2
Information Element
criticalExtensions CHOICE {
c1 CHOICE{
interestIndication-r11 OF SEQUENCE {
mbms-FreqList-r11[n] SEQUENCE (SIZE
(1..maxFreqMBMS-r11)) OF { INTEGER
(0..maxEARFCN2) }
mbms-Priority-r11
lateNonCriticalExtension
nonCriticalExtension SEQUENCE {}
nonCriticalExtension SEQUENCE {
mbms-Services-r13 SEQUENCE (SIZE
(0..maxMBMS-ServiceListPerUE-r13)) OF
SEQUENCE {
tmgi-r13 SEQUENCE {
plmn-Id-r9 CHOICE {
plmn-Index-r9
}
serviceId-r9
}
}
nonCriticalExtension SEQUENCE {}
Value/remark
The number of entries is
set according to specific
message content.
Not checked
Not present
Not present
MBMS
SC-PTM
1
‘000001’H
Not present
}
}
}
}
Condition
MBMS
SC-PTM
INTEGER
(0..maxEARFCN2
)
ENUMERATED
{true}
Explanation
MBMS cell environment
SC-PTM cell environment
ETSI
OCTET STRING
(SIZE (3))
3GPP TS 36.508 version 15.5.0 Release 15
–
365
ETSI TS 136 508 V15.5.0 (2019-07)
MBSFNAreaConfiguration
Table 4.6.1-4A: MBSFNAreaConfiguration
Derivation Path: 36.331 clause 6.2.2
Information Element
MBSFNAreaConfiguration-r9 ::= SEQUENCE {
commonSF-Alloc-r9 SEQUENCE (SIZE
(1..maxMBSFN-Allocations)) OF SEQUENCE {
radioframeAllocationPeriod
radioframeAllocationOffset
subframeAllocation CHOICE {
oneFrame
}
}
commonSF-AllocPeriod-r9
pmch-InfoList-r9 SEQUENCE (SIZE (0..maxPMCHPerMBSFN)) OF SEQUENCE {
pmch-Config-r9 SEQUENCE {
sf-AllocEnd-r9
dataMCS-r9
mch-SchedulingPeriod-r9
}
mbms-SessionInfoList-r9 SEQUENCE (SIZE
(0..maxSessionPerPMCH)) OF SEQUENCE {
MBMS-SessionInfo-r9 SEQUENCE {
tmgi-r9 SEQUENCE {
plmn-Id-r9 CHOICE{
plmn-Index-r9
}
serviceId-r9
}
sessionId-r9
logicalChannelIdentity-r9
Value/remark
Comment
Condition
n4
1
0
FDD
TDD
‘100000’B
‘000010’B
FDD
TDD
rf8
1
0
rf8
1
‘000000’O
OCTET STRING
(SIZE (3))
Not present
1
}
}
}
–
MeasurementReport
Table 4.6.1-5: MeasurementReport
Derivation Path: 36.331 clause 6.2.2
Information Element
MeasurementReport ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE {
measurementReport-r8 SEQUENCE {
measResults
nonCriticalExtension SEQUENCE {}
Value/remark
Set according to specific
message content
Not checked
}
}
}
}
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
366
ETSI TS 136 508 V15.5.0 (2019-07)
MobilityFromEUTRACommand
Table 4.6.1-6: MobilityFromEUTRACommand
Derivation Path: 36.331 clause 6.2.2
Information Element
MobilityFromEUTRACommand ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE {
mobilityFromEUTRACommand-r8 SEQUENCE {
csFallbackIndicator
purpose CHOICE {
Value/remark
Comment
Condition
Comment
Condition
RRCTransactionIdentifier-DL
Set according to specific
message content
Set according to specific
message content
handover
cellChangeOrder
}
nonCriticalExtension SEQUENCE {}
Not present
}
}
}
}
–
Paging
Table 4.6.1-7: Paging
Derivation Path: 36.331 clause 6.2.2
Information Element
Paging ::= SEQUENCE {
pagingRecordList SEQUENCE (SIZE
(1..maxPageRec)) OF SEQUENCE {
ue-Identity[1] CHOICE {
s-TMSI
}
cn-Domain[1]
}
systemInfoModification
etws-Indication
nonCriticalExtension SEQUENCE {}
Value/remark
1 entry
Set to the value of the STMSI of the UE
ps
Not present
Not present
Not present
}
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
367
ETSI TS 136 508 V15.5.0 (2019-07)
RRCConnectionReconfiguration
Table 4.6.1-8: RRCConnectionReconfiguration
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionReconfiguration ::= SEQUENCE {
rrc-TransactionIdentifier
368
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
Condition
RRCTransactionIdentifier-DL
criticalExtensions CHOICE {
c1 CHOICE{
rrcConnectionReconfiguration-r8 ::= SEQUENCE
{
measConfig
mobilityControlInfo
dedicatedInfoNASList
radioResourceConfigDedicated
Not present
MeasConfig-DEFAULT
Not present
MobilityControlInfo-HO
Not present
Set according to specific
message content
Not present
RadioResourceConfigDe
dicated-SRB2-DRB(n, m)
RadioResourceConfigDe
dicated-DRB(n, m)
RadioResourceConfigDe
dicated-AM-DRBADD(bid)
RadioResourceConfigDe
dicated-UM-DRBADD(bid)
RadioResourceConfigDe
dicated-DRB-REL(bid)
RadioResourceConfigDe
dicated-HO
RadioResourceConfigDe
dicated-HO-TOEUTRA(n, m)
RadioResourceConfigDe
dicated-DRB-Mod
RadioResourceConfigDe
dicated-SCell_AddMod
RadioResourceConfigDe
dicated-PCell-PATTERN
RadioResourceConfigDe
dicated-EN-DC-Split
RadioResourceConfigDe
dicated-ENDC_Split_DRB_Rel(bid)
RadioResourceConfigDe
dicated-SRB4
RadioResourceConfigDe
dicated-EN-DC-SRB2DRB
ETSI
MEAS
HO, HO-TOEUTRA
SRB2DRB(n, m)
DRB(n, m)
SRB1SRB2DRB(n,m)
AM-DRBADD(bid)
UM-DRBADD(bid)
DRBREL(bid)
DRB-Mod
MCG_and_s
plit
ENDC_SRB2DRB
SRB2DRB(n, m)
DRB(n, m)
AM-DRBADD(bid)
UM-DRBADD(bid)
DRBREL(bid)
HO
HO-TOEUTRA(n,m
)
DRB-Mod
SCell_AddM
od
PCellPATTERN
MCG_and_s
plit
ENDC_Split_R
el(bid)
SRB4
ENDC_SRB2DRB
3GPP TS 36.508 version 15.5.0 Release 15
securityConfigHO
nonCriticalExtension ::= SEQUENCE {
lateNonCriticalExtension ::= SEQUENCE {
lateNonCriticalExtension
nonCriticalExtension ::= SEQUENCE {
antennaInfoDedicatedPCell-v10i0 ::=
SEQUENCE {
maxLayersMIMO-r10
}
nonCriticalExtension SEQUENCE {}
}
}
nonCriticalExtension ::= SEQUENCE {
otherConfig-r9
fullConfig-r9
nonCriticalExtension ::= SEQUENCE {
sCellToReleaseList-r10
sCellToAddModList-r10 ::= SEQUENCE
(SIZE (1..maxSCell-r10)) OF
sCellToAddMod-r10[n]
}
nonCriticalExtension ::= SEQUENCE {
systemInfomationBlockType1Dedicated-r11
nonCriticalExtension ::= SEQUENCE {
wlan-OffloadInfo-r12 CHOICE {}
wlan-OffloadInfo-r12 CHOICE {
release
369
Not present
SecurityConfigHODEFAULT
t350-r12
HO, HO-TOEUTRA
4Rx_PCC
Not present
fourLayers
Not present
OtherConfig-r9
Not present
Not present
The same number of
entries as the configured
SCell(s)
SCellToAddMod-r10DEFAULT
OtherConfig
n denotes the
index of the entry
SCell_AddM
od
Not present
Not present
NULL
setup ::= SEQUENCE {
wlan-OffloadConfigDedicated-r12
ETSI TS 136 508 V15.5.0 (2019-07)
WLANOffloadRelea
se
WLANOffloadSetup
WLAN-OffloadConfigDEFAULT
min10
}
}
scg-Configuration-r12
scg-Configuration-r12
sl-SyncTxControl-r12
sl-DiscConfig-r12
sl-CommConfig-r12
nonCriticalExtension ::= SEQUENCE {}
Not present
SCG-Configuration-r12DEFAULT
Not present
Not present
Not present
Not present
LWA
nonCriticalExtension ::= SEQUENCE
{
lwa-configuration-r13
PSCell_Rele
ase,
PSCell_Mod,
PSCell_Add_
Split_DRB,
PSCell_Add_
SCG_DRB
Set as specified in test
case
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
}
nonCriticalExtension ::= SEQUENCE {
lwip-configuration-r13
370
LWIP
Set as specified in test
case
}
nonCriticalExtension ::= SEQUENCE {
MCG_and_S
CG,
MCG_and
_split, SCGDRB(n,m),
MCG_NR_P
DCP, ENDC_PSCell_
Rel,
SRB_NR_P
DCP,
ENDC_EmbedN
R_RRCReco
n,
ENDC_Embed_
RBConfig
nonCriticalExtension ::= SEQUENCE {
nonCriticalExtension ::= SEQUENCE {
nr-Config-r15 CHOICE {
release
ENDC_PSCell_
Rel
MCG_and_S
CG,
MCG_and_s
plit, SCGDRB(n,m),
MCG_NR_P
DCP,
ENDC_EmbedN
R_RRCReco
n,
ENDC_Embed_
RBConfig
setup SEQUENCE {
endc-ReleaseAndAdd-r15
nr-SecondaryCellGroupConfig-r15
ETSI TS 136 508 V15.5.0 (2019-07)
false
OCTET STRING
including the
RRCReconfiguration
message and the IE
secondaryCellGroup
according TS 38.508-1
[67], table 4.6.1-3 with
condition EN-DC.
OCTET STRING
including the
RRCReconfiguration
message, the IE
secondaryCellGroup
according TS 38.508-1
[67], table 4.6.1-3 with
condition EN-DC and the
IE PDCP-Config
according TS 38.508-1
[67], table 4.6.3-74 with
condition Split.
ETSI
MCG_and_S
CG,
MCG_and_s
plit
3GPP TS 36.508 version 15.5.0 Release 15
p-MaxEUTRA-r15
}
}
sk-Counter-r15
nr-RadioBearerConfig1-r15
nr-RadioBearerConfig2-r15
tdm-PatternConfig-r15
371
ETSI TS 136 508 V15.5.0 (2019-07)
OCTET STRING
including the
RRCReconfiguration
message and the IE
secondaryCellGroup
according TS 38.508-1
[67], table [4.8.1-2].
OCTET STRING
including the test case
specific
RRCReconfiguration
Not present
20
SCGDRB(n,m)
ENDC_EmbedN
R_RRCReco
n
p-MaxEUTRA-r15
value when
pc_dynamicPower
Sharing is set to
FALSE
0
OCTET STRING
including
RadioBearerConfig
according TS 38.508-1
[67], [table 4.6.3-100]
with condition ENDC_DRB.
OCTET STRING
including
RadioBearerConfig
according TS 38.508-1
[67], table [4.8.1-3].
OCTET STRING
including
RadioBearerConfig
according TS 38.508-1
[67], table [4.6.3-100]
with condition
MCG_NR_PDCP
OCTET STRING
including
RadioBearerConfig
according TS 38.508-1
[67], table 4.6.3-100 with
condition
SRB_NR_PDCP
OCTET STRING
including the test case
specific
RadioBearerConfig
Not present
Not present
}
}
}
}
}
}
}
}
}
}
}
}
Condition
Explanation
ETSI
NOT
pc_dynamic
PowerSharin
g
MCG_and_S
CG,
MCG_and_s
plit
SCGDRB(n,m)
MCG_NR_P
DCP
SRB_NR_P
DCP
ENDC_Embed_
RBConfig
3GPP TS 36.508 version 15.5.0 Release 15
SRB2-DRB(n,m)
DRB(n,m)
AM-DRB-ADD(bid)
UM-DRB-ADD(bid)
DRB-REL(bid)
HO
MEAS
HO-TO-EUTRA(n,m)
nonFullConfig
DRB-Mod
SCell_AddMod
PCell-PATTERN
OtherConfig
WLAN-OffloadSetup
WLAN-OffloadRelease
PSCell_Mod
PSCell_Release
PSCell_Add_Split_DRB
PSCell_Add_SCG_DRB
4Rx_PCC
MCG_and_SCG
MCG_and_split
SCG-DRB(n,m)
EN-DC_PSCell_Rel
EN-DC_Split_Rel(bid)
MCG_NR_PDCP
SRB_NR_PDCP
EN-DC_SRB2-DRB
EN-DC_EmbedNR_RRCRecon
EN-DC_EmbedNR_RBConfig
SRB4
LWA
LWIP
372
ETSI TS 136 508 V15.5.0 (2019-07)
Establishment of a SRB and DRB combination with n x AM DRB and
m x UM DRB (including establishment of SRB2)
Establishment of additional n x AM DRB:s and m x UM DRB:s (SRB2
should already be established)
Establishment of a single additional AM DRB with bearer identity bid
(SRB2 should already be established)
Establishment of a single additional UM DRB with bearer identity bid
(SRB2 should already be established)
Release of the DRB with bearer identity bid
Intra LTE handover
A measurement is configured
Inter-RAT handover to E-UTRA including the establishment of a
SRB1, SRB2 and n x AM DRB plus m x UM DRB
The field is not present in case of handover within E-UTRA when the
fullConfig is included or in case of handover of handover to E-UTRA;
otherwise it is optional present, need ON.
Modification of already established DRB ID 2 and is used for sending
Modify EPS Bearer Context Request message (SRB2 should already
be established)
Addition or modification of SCell(s)
eICIC Serving Cell Pattern
Other Configuration is configured
When Dedicated WLAN Offload parameters need to be configured in
UE
When Dedicated WLAN Offload parameters need to be released in UE
Modification of PSCell(s)
Release of PSCell
Add PSCell(s) and setup of Split DRB
Add PSCell(s) and setup of SCG DRB
For 4Rx testcases with more than 2 Layers on PCC
EN-DC with MCG and SCG.
EN-DC with MCG and split.
EN-DC establishment of additional n x AM DRB:s and m x UM DRB:s
in SCG.
Release of EN-DC PSCell
Release of E-UTRA leg of EN-DC Split DRB with bearer identity bid
EN-DC configuration of MCG DRB with NR PDCP.
EN-DC configuration of SRB1 and SRB2 with NR PDCP.
Establishment of SRB2 and DRB combination for EN-DC
To modify NR Cell Configuration in EN-DC by including
RRCReconfiguration
To modify NR RB Configuration in EN-DC by including
RadioBearerConfig
Establishment of SRB4
LWA is being configured
LWIP is being configured
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
373
ETSI TS 136 508 V15.5.0 (2019-07)
RRCConnectionReconfiguration (SideLink)
Table 4.6.1-8A: RRCConnectionReconfiguration (SideLink)
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.508 table 4.6.1-8
Information Element
RRCConnectionReconfiguration ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE {
rrcConnectionReconfiguration-r8 SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
sl-SyncTxControl-r12 SEQUENCE {
networkControlledSyncTx-r12
}
sl-DiscConfig-r12 SEQUENCE {
discTxResources-r12 CHOICE {
release
setup CHOICE {
scheduled-r12 SEQUENCE {
discTxConfig-r12 SEQUENCE {
cp-Len-r12
discPeriod-r12
numRetx-r12
numRepetition-r12
tf-ResourceConfig-r12 SEQUENCE
374
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
off
Comment
Condition
This field indicates
whether the UE
shall transmit
synchronisation
information (i.e.
become
synchronisation
source). Value On
indicates the UE
to transmit
synchronisation
information while
value Off indicates
the UE to not
transmit such
information.
DISC
NULL
RELEASE
SETUP
SCHEDULE
D
normal
rf32
0
1
{
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
12
24
0
23
48
160
163
00000000
11000000
00000000
00000000
00000000
00000000
11000000
}
txParameters-r12 SEQUENCE {
txParametersGeneral-r12
SEQUENCE {
alpha-r12
p0-r12
}
ue-SelectedResourceConfig-r12
}
rxParameters-r12
al0
31
Not present
Not present
ETSI
BW5
BW10
bs40-r12
BW5
BW10
FDD
TDD
FDD
bs16-r12
TDD
small-r12
3GPP TS 36.508 version 15.5.0 Release 15
}
discTF-IndexList-r12 SEQUENCE
(SIZE (1..maxSL-TF-IndexPair-r12)) OF SL-TFIndexPair-r12 {
SL-TF-IndexPair-r12[1] SEQUENCE
{
discSF-Index-r12
discPRB-Index-r12
375
1
1
ETSI TS 136 508 V15.5.0 (2019-07)
INTEGER (1..
200)
INTEGER (1.. 50)
}
}
discHoppingConfig-r12 SEQUENCE {
a-r12
1
INTEGER (1..200)
Per cell
parameter:
(1)
N PSDCH
b-r12
1
see TS
36.213 [29,
14.3.1].
INTEGER (1..10)
Per UE
parameter:
( 2)
N PSDCH
c-r12
n1
see TS
36.213 [29,
14.3.1].
ENUMERATED
{n1, n5}
Per cell
parameter:
( 3)
N PSDCH
see
TS36.213 [29,
14.3.1]
}
}
ue-Selected-r12 SEQUENCE {
UESELECTED
discTxPoolDedicated-r12
SEQUENCE {
poolToReleaseList-r12 SEQUENCE
(SIZE (1..maxSL-TxPool-r12)) OF SL-TxPoolIdentityr12 {
SL-TxPoolIdentity-r12[1]
}
poolToAddModList-r12 SEQUENCE
(SIZE (1..maxSL-TxPool-r12)) OF SLDiscTxPoolToAddMod-r12
SL-DiscTxPoolToAddMod-r12[1]
::= SEQUENCE {
poolIdentity-r12
pool-r12 SEQUENCE {
cp-Len-r12
discPeriod-r12
numRetx-r12
numRepetition-r12
tf-ResourceConfig-r12
SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
RELEASE
1
2 TxPools
SETUP
TxPool 1
1
normal
rf32
0
1
12
24
0
23
48
160
163
ETSI
BW5
BW10
small-r12
BW5
BW10
FDD
TDD
3GPP TS 36.508 version 15.5.0 Release 15
subframeBitmap-r12
376
00000000
00110000
00000000
00000000
00000000
00000000
00110000
ETSI TS 136 508 V15.5.0 (2019-07)
bs40-r12
FDD
bs16-r12
TDD
}
txParameters-r12 SEQUENCE {
txParametersGeneral-r12
SEQUENCE {
alpha-r12
p0-r12
al0
31
}
ue-SelectedResourceConfigr12 SEQUENCE {
rsrpBased-r12
poolSelection-r12
SEQUENCE {
threshLow-r12
threshHigh-r12
}
txProbability-r12
}
}
rxParameters-r12
3
4
-90dBm
-80dBm
p100
100% the
probability of
transmitting
announcement in
a discovery period
when configured
with a pool of
resources
Not present
}
}
SL-DiscTxPoolToAddMod-r12[2]
TxPool 2
::= SEQUENCE {
poolIdentity-r12
pool-r12 SEQUENCE {
cp-Len-r12
discPeriod-r12
numRetx-r12
numRepetition-r12
tf-ResourceConfig-r12
2
normal
rf32
0
1
SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
12
24
0
23
48
160
163
00000000
00000011
00000000
00000000
00000000
00000000
00000011
}
txParameters-r12 SEQUENCE {
txParametersGeneral-r12
SEQUENCE {
alpha-r12
p0-r12
al0
31
}
ETSI
BW5
BW10
bs40-r12
BW5
BW10
FDD
TDD
FDD
bs16-r12
TDD
small-r12
3GPP TS 36.508 version 15.5.0 Release 15
377
ETSI TS 136 508 V15.5.0 (2019-07)
ue-SelectedResourceConfigr12 SEQUENCE {
rsrpBased-r12
poolSelection-r12
SEQUENCE {
threshLow-r12
threshHigh-r12
}
txProbability-r12
}
}
rxParameters-r12
4
5
-80dBm
-70dBm
p100
100% the
probability of
transmitting
announcement in
a discovery period
when configured
with a pool of
resources
Not present
}
}
}
}
}
}
}
discTF-IndexList-v1260 CHOICE {
release
setup SEQUENCE {
discTF-IndexList-r12b SEQUENCE
(SIZE (1..maxSL-TF-IndexPair-r12)) OF SL-TFIndexPair-r12b
SL-TF-IndexPair-r12b[1] SEQUENCE
{
discSF-Index-r12b
1
discPRB-Index-r12b
1
NULL
INTEGER (1..
209)
INTEGER (1.. 49)
}
}
}
}
}
sl-DiscConfig-r12
sl-CommConfig-r12
sl-CommConfig-r12 SEQUENCE {
commTxResources-r12 CHOICE {
release
setup CHOICE {
scheduled-r12 SEQUENCE {
sl-RNTI-r12
mac-MainConfig-r12 SEQUENCE {
periodic-BSR-TimerSL
retx-BSR-TimerSL
}
Not Present
Not Present
COMM
DISC
COMM
NULL
RELEASE
SETUP
SCHEDULE
D
'1FF1'H
sf20
sf320
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
378
sc-CommTxConfig-r12 SEQUENCE {
sc-CP-Len-r12
sc-Period-r12
sc-TF-ResourceConfig-r12
ETSI TS 136 508 V15.5.0 (2019-07)
SLCommResourceP
ool-r12
Indicates a pool of
resources for SC
when E-UTRAN
schedules Tx
resources (i.e.
when indices
included in DCI
format 5 indicate
the actual data
resources to be
used as specified
in TS 36.212 [61,
5.3.3.1.9]).
normal
sf40
SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
data-CP-Len-r12
dataHoppingConfig-r12
13
25
0
24
49
0
00000000
11000000
00000000
00000000
00000000
BW5
BW10
BW5
BW10
small-r12
bs40-r12
FDD
normal
SEQUENCE {
hoppingParameter-r12
numSubbands-r12
rb-Offset-r12
}
ue-SelectedResourceConfig-r12
rxParametersNCell-r12
txParameters-r12
}
mcs-r12
}
ue-Selected-r12 SEQUENCE {
0
ns1
0
Not present
Not present
Not present
0
UESELECTED
commTxPoolNormalDedicated-r12
SEQUENCE {
poolToReleaseList-r12 SEQUENCE
(SIZE (1..maxSL-TxPool-r12)) OF SL-TxPoolIdentityr12 {
SL-TxPoolIdentity-r12[1]
}
poolToAddModList-r12 SEQUENCE
(SIZE (1..maxSL-TxPool-r12)) OF SLCommTxPoolToAddMod-r12
SL-CommTxPoolToAddMod-r12[1]
::= SEQUENCE {
poolIdentity-r12
pool-r12 SEQUENCE {
sc-CP-Len-r12
RELEASE
1
INTEGER (1..
maxSL-TxPoolr12)
1 TxPool
TxPool 1
1
normal
ETSI
INTEGER (1..
maxSL-TxPoolr12)
SETUP
3GPP TS 36.508 version 15.5.0 Release 15
sc-Period-r12
sc-TF-ResourceConfig-r12
379
ETSI TS 136 508 V15.5.0 (2019-07)
sf40
SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
data-CP-Len-r12
dataHoppingConfig-r12
13
25
0
24
49
0
00000011
00000000
00000000
00000000
00000000
BW5
BW10
BW5
BW10
small-r12
bs40-r12
FDD
normal
SEQUENCE {
hoppingParameter-r12
numSubbands-r12
rb-Offset-r12
0
ns1
0
}
ue-SelectedResourceConfig-r12
SEQUENCE {
data-TF-ResourceConfig-r12
SEQUENCE {
prb-Num-r12
prb-Start-r12
prb-End-r12
offsetIndicator-r12
subframeBitmap-r12
}
trpt-Subset-r12
}
rxParametersNCell-r12
txParameters-r12
13
25
0
24
49
0
00000000
00000000
00000011
11000000
00000000
001
Not present
Not present
}
}
}
}
}
}
}
nonCriticalExtension SEQUENCE {}
}
}
}
}
}
}
}
}
}
Condition
Explanation
ETSI
BW5
BW10
BW5
BW10
small-r12
bs40-r12
FDD
3GPP TS 36.508 version 15.5.0 Release 15
DISC
COMM
RELEASE
SETUP
SCHEDULED
UE-SELECTED
FDD
TDD
–
380
ETSI TS 136 508 V15.5.0 (2019-07)
Only SideLink Discovery configuration provided
Only SideLink Communication configuration provided
Release Discovery/Communication Respurces
Setup Discovery/Communication Respurces
The resources the UE can use are scheduled by the NW.
The resources the UE can use are to be selected by the UE from set of resources
provided by the NW.
FDD cell environment
TDD cell environment (TDD config 1)
RRCConnectionReconfiguration (V2X)
Table 4.6.1-8B: RRCConnectionReconfiguration (V2X)
Derivation Path: 36.508 table 4.6.1-8
Information Element
RRCConnectionReconfiguration ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE {
rrcConnectionReconfiguration-r8 SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
sl-V2X-ConfigDedicated-r14
sCellToAddModListExt-v14xy
perCC-GapIndicationRequest-r14
systemInformationBlockType2Dedicated-r14
nonCriticalExtension SEQUENCE {}
}
}
}
}
}
}
}
}
}
}
}
Value/remark
SL-V2XConfigDedicated-r14DEFAULT condition
SCHEDULED and
SETUP
Not present
Not present
Not present
Not present
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
381
ETSI TS 136 508 V15.5.0 (2019-07)
RRCConnectionReconfigurationComplete
Table 4.6.1-9: RRCConnectionReconfigurationComplete
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionReconfigurationComplete ::=
SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
rrcConnectionReconfigurationComplete-r8
SEQUENCE {
nonCriticalExtension SEQUENCE {}
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
scg-ConfigResponseNR-r15
Value/remark
Comment
Condition
RRCTransactionIdentifier-UL
Not checked
MCG_and_
SCG,
MCG_and_s
pli, SCGDRB(n,m)
OCTET STRING
including the
RRCReconfigurationCom
plete message according
TS 38.508-1 [67], table
4.6.1-4.
}
}
}
}
}
}
}
}
}
Condition
MCG_and_SCG
MCG_and_split
SCG-DRB(n,m)
Explanation
EN-DC with MCG and SCG.
EN-DC with MCG and split.
EN-DC establishment of additional n x AM DRB:s and m x UM DRB:s
in SCG.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
382
ETSI TS 136 508 V15.5.0 (2019-07)
RRCConnectionReestablishment
Table 4.6.1-10: RRCConnectionReestablishment
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionReestablishment ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE{
rrcConnectionReestablishment-r8 SEQUENCE {
radioResourceConfigDedicated
nextHopChainingCount
nonCriticalExtension SEQUENCE {}
Value/remark
Comment
Condition
RRCTransactionIdentifier-DL
RadioResourceConfigDe
dicated-SRB1
0
Not present
}
}
}
}
–
RRCConnectionReestablishmentComplete
Table 4.6.1-11: RRCConnectionReestablishmentComplete
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionReestablishmentComplete ::=
SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
rrcConnectionReestablishmentComplete-r8
SEQUENCE {
nonCriticalExtension SEQUENCE {}
}
}
}
–
Value/remark
Comment
Condition
RRCTransactionIdentifier-UL
Not checked
RRCConnectionReestablishmentReject
Table 4.6.1-12: RRCConnectionReestablishmentReject
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionReestablishmentReject ::=
SEQUENCE {
criticalExtensions CHOICE {
rrcConnectionReestablishmentReject-r8
SEQUENCE {
nonCriticalExtension SEQUENCE {}
}
}
}
Value/remark
Not present
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
383
ETSI TS 136 508 V15.5.0 (2019-07)
RRCConnectionReestablishmentRequest
Table 4.6.1-13: RRCConnectionReestablishmentRequest
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionReestablishmentRequest ::=
SEQUENCE {
criticalExtensions CHOICE {
rrcConnectionReestablishmentRequest-r8
SEQUENCE {
ue-Identity
reestablishmentCause
spare
Value/remark
Comment
Condition
Comment
Condition
Set according to specific
message content
Set according to specific
message content
Present but contents not
checked
}
}
}
–
RRCConnectionReject
Table 4.6.1-14: RRCConnectionReject
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionReject ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE {
rrcConnectionReject-r8 SEQUENCE {
waitTime
nonCriticalExtension SEQUENCE {}
}
}
}
}
Value/remark
3(seconds)
Not present
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
384
ETSI TS 136 508 V15.5.0 (2019-07)
RRCConnectionRelease
Table 4.6.1-15: RRCConnectionRelease
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionRelease ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE {
rrcConnectionRelease-r8 SEQUENCE {
releaseCause
redirectedCarrierInfo
idleModeMobilityControlInfo
nonCriticalExtension SEQUENCE {}
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
resumeIdentity-r13
Value/remark
Comment
Condition
RRCTransactionIdentifier-DL
other
rrc-Suspend
Not present
Not present
Not present
UP-CIoT
UP-CIoT
A valid value, calculated
by the SS
BIT STRING
(SIZE(40))
}
}
}
}
}
}
}
}
Condition
UP-CIoT
–
Explanation
User plane CIoT
RRCConnectionRequest
Table 4.6.1-16: RRCConnectionRequest
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionRequest ::= SEQUENCE {
criticalExtensions CHOICE {
rrcConnectionRequest-r8 SEQUENCE {
ue-Identity CHOICE {
s-TMSI
}
establishmentCause
spare
Value/remark
Any allowed value
Present but contents not
checked
Present but contents not
checked
}
}
}
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
385
ETSI TS 136 508 V15.5.0 (2019-07)
RRCConnectionResume
Table 4.6.1-16A: RRCConnectionResume
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionResume-r13 ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE {
rrcConnectionResume-r13 SEQUENCE {
radioResourceConfigDedicated-r13
nextHopChainingCount-r13
measConfig-r13
antennaInfoDedicatedPCell-r13
drb-ContinueROHC-r13
lateNonCriticalExtension
nonCriticalExtension SEQUENCE {}
Value/remark
Comment
Condition
Comment
Condition
RRCTransactionIdentifier-DL
RadioResourceConfigDe
dicated-SRB2-DRB(1, 0)
0
Not present
Not present
Not present
Not present
Not present
}
}
}
}
–
RRCConnectionResumeComplete
Table 4.6.1-16B: RRCConnectionResumeComplete
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionResumeComplete-r13 ::=
SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
rrcConnectionResumeComplete-r13 SEQUENCE {
selectedPLMN-Identity-r13
dedicatedInfoNAS-r13
rlf-InfoAvailable-r13
logMeasAvailable-r13
connEstFailInfoAvailable-r13
mobilityState-r13
mobilityHistoryAvail-r13
logMeasAvailableMBSFN-r13
lateNonCriticalExtension
nonCriticalExtension SEQUENCE {}
}
}
Value/remark
RRCTransactionIdentifier-UL
Not checked
Not checked
Not checked
Not checked
Not checked
Normal
Not checked
Not checked
Not checked
Not checked
}
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
386
ETSI TS 136 508 V15.5.0 (2019-07)
RRCConnectionResumeRequest
Table 4.6.1-16C: RRCConnectionResumeRequest
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionResumeRequest-r13 ::= SEQUENCE
{
criticalExtensions CHOICE {
rrcConnectionResumeRequest-r13 SEQUENCE {
resumeIdentity-r13 CHOICE {
truncatedResumeID-r13
}
shortResumeMAC-I-r13
Value/remark
Comment
Condition
Comment
Condition
Present but contents not
checked
Present but contents not
checked
mt-Access
Present but contents not
checked
resumeCause-r13
spare
}
}
}
–
RRCConnectionSetup
Table 4.6.1-17: RRCConnectionSetup
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionSetup ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE {
rrcConnectionSetup-r8 SEQUENCE {
radioResourceConfigDedicated
nonCriticalExtension SEQUENCE {}
Value/remark
RRCTransactionIdentifier-DL
RadioResourceConfigDe
dicated-SRB1
Not present
}
}
}
}
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
387
ETSI TS 136 508 V15.5.0 (2019-07)
RRCConnectionSetupComplete
Table 4.6.1-18: RRCConnectionSetupComplete
Derivation Path: 36.331 clause 6.2.2
Information Element
RRCConnectionSetupComplete ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE {
rrcConnectionSetupComplete-r8 SEQUENCE {
selectedPLMN-Identity
registeredMME
dedicatedInfoNAS
nonCriticalExtension SEQUENCE {}
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
up-CIoT-EPS-Optimisation-r13
cp-CIoT-EPS-Optimisation-r13
}
}
}
Value/remark
Comment
Condition
RRCTransactionIdentifier-UL
1
Not checked
Present but contents not
checked
Not checked
UP-CIoT or
CP-CIoT
true
true
}
}
}
}
}
}
Condition
UP-CIoT
Explanation
If user plane CIoT supported (TS 36.523-2, A.4.4-1/132).
CP-CIoT
Note 1: This condition is only applicable if also condition CIoT-test apply.
If control plane CIoT supported (TS 36.523-2, A.4.4-1/nnn).
Note 1: This condition is only applicable if also condition CIoT-test apply.
ETSI
UP-CIoT
CP-CIoT
3GPP TS 36.508 version 15.5.0 Release 15
–
388
ETSI TS 136 508 V15.5.0 (2019-07)
SCGFailureInformationNR
Table 4.6.1-18AA: SCGFailureInformationNR
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.2.2
Information Element
SCGFailureInformationNR-r15 ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE {
sgsFailureInformationNR-r15-IEs SEQUENCE {
failureReportSCG-NR-r15 SEQUENCE {
failureType-r15
measResultFreqListFailNR-r15 SEQUENCE
(SIZE (1..maxFreqNR-r15)) OF SEQUENCE {
MeasResultFreqFailNR-r15 SEQUENCE {
carrierFreq-r15
measResultCellListNR-r15 SEQUENCE
(SIZE (1..maxCellReport)) OF SEQUENCE {
MeasResultCellNR-r15 SEQUENCE {
PhysCellIdNR-r15
MeasResultNR-r15 SEQUENCE {
RSRP-RangeNR-r15
RSRQ-RangeNR-r15
RS-SINR-RangeNR-r15
}
MeasResultSSB-IndexList-r15
SEQUENCE (SIZE (1..maxRS-IndexReport-r15)) OF
SEQUENCE {
MeasResultSSB-Index-r15 SEQUENCE {
RS-IndexNR-r15
MeasResultNR-r15 SEQUENCE {
RSRP-RangeNR-r15
RSRQ-RangeNR-r15
RS-SINR-RangeNR-r15
389
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Any allowed value
n entries of
MeasResultFreqFailNRr15
entry [1]
Downlink ARFCN of
ssbFrequency
n entries of
MeasResultCellNR-r15
entry [1]
INTEGER (0.. 1007)
Comment
t310-Expiry, OR
randomAccessPro
blem, OR
rlc-MaxNumRetx,
OR
scgChangeFailure,
OR
scgreconfigFailure,
OR
srb3IntegrityFailure
n denotes the
number of NR
frequencies the
UE is configured
to measure by
measConfig
ARFCN-ValueNRr15
n denotes the
number of
reported
cells/CSI-RS
resources
the physical layer
identity (PCI) of
an NR cell
as specified in TS
38.508-1 [67], Table
4.6.3-114
as specified in TS
38.508-1 [67], Table
4.6.3-115
as specified in TS
38.508-1 [67], Table
4.6.3-130
Integer value for
RSRP
measurements
Integer value for
RSRQ
measurements
Integer value for
SINR
measurements
n entries of
MeasResultSSB-Indexr15
entry [1]
INTEGER (0.. maxRSIndex-1-r15)
n denotes the
number of RS
indices for RRM
as specified in TS
38.508-1 [67], Table
4.6.3-114
as specified in TS
38.508-1 [67], Table
4.6.3-115
as specified in TS
38.508-1 [67], Table
4.6.3-130
Integer value for
RSRP
measurements
Integer value for
RSRQ
measurements
Integer value for
SINR
measurements
}
}
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
390
ETSI TS 136 508 V15.5.0 (2019-07)
MeasResultSSBIndex-r15 entry [x]
if any
...
}
}
...
MeasResultCellN
R-r15 entry [x] if
any
}
}
...
}
measResultSCG-r15
containing the NR
MeasResultSCG-Failure
IE as specified in TS
38.508-1 [67], Table
4.6.3-59
}
nonCriticalExtension SEQUENCE {}
}
}
criticalExtensionsFuture SEQUENCE {}
}
}
–
SCPTMConfiguration
Table 4.6.1-18a: SCPTMConfiguration
Derivation Path: 36.331 clause 6.2.2
Information Element
SCPTMConfiguration-r13 ::= SEQUENCE {
sc-mtch-InfoList-r13 SEQUENCE (SIZE (0..maxSCMTCH-r13)) OF SEQUENCE {
mbmsSessionInfo-r13 SEQUENCE {
tmgi-r13 SEQUENCE {
plmn-Id-r9 CHOICE {
plmn-Index-r9
}
}
serviceId-r9
}
sessionId-r13
}
g-RNTI-r13
sc-mtch-schedulingInfo-r13 SEQUENCE {
on-DurationTimerSCPTM-r13
drx-InactivityTimerSCPTM-r13
schedulingPeriodStartOffsetSCPTM-r13 CHOICE{
sf20
}
}
sc-mtch-neighbourCell-r13
}
scptm-NeighbourCellList-r13 SEQUENCE (SIZE
(1..maxNeighCell-SCPTM-r13)) OF SEQUENCE {
physCellId-r13
carrierFreq-r13
}
lateNonCriticalExtension
nonCriticalExtension SEQUENCE {}
}
Value/remark
Comment
1
‘000001’H
Not present
‘0100’H
Not present
Not present
Not present
Not present
Not present
Not present
Not present
Not present
ETSI
OCTET STRING
(SIZE (3))
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
391
ETSI TS 136 508 V15.5.0 (2019-07)
SCPTMConfiguration-BR
Table 4.6.1-18b: SCPTMConfiguration-BR
Derivation Path: 36.331 clause 6.2.2
Information Element
SCPTMConfiguration-BR-r14 ::=
sc-mtch-InfoList-r14 SEQUENCE (SIZE (0..maxSCMTCH-BR-r14)) OF SEQUENCE {
sc-mtch-CarrierFreq-r14
mbmsSessionInfo-r14 SEQUENCE {
tmgi-r13 SEQUENCE {
plmn-Id-r9 CHOICE {
plmn-Index-r9
}
serviceId-r9
}
sessionId-r13
Comment
Condition
FFS
1
‘000001’H
OCTET STRING
(SIZE (3))
Not present
}
g-RNTI-r14
sc-mtch-schedulingInfo-r14
sc-mtch-neighbourCell-r14
mpdcch-Narrowband-SC-MTCH-r14
mpdcch-NumRepetition-SC-MTCH-r14
mpdcch-StartSF-SC-MTCH-r14 CHOICE {
fdd-r14
tdd-r14
}
mpdcch-PDSCH-HoppingConfig-SC-MTCH-r14
mpdcch-PDSCH-CEmodeConfig-SC-MTCH-r14
mpdcch-PDSCH-MaxBandwidth-SC-MTCH-r14
mpdcch-Offset-SC-MTCH-r14
p-a-r14
}
scptm-NeighbourCellList-r13 SEQUENCE (SIZE
(1..maxNeighCell-SCPTM-r13)) OF SEQUENCE {
physCellId-r13
carrierFreq-r13
}
p-b-r14
lateNonCriticalExtension
nonCriticalExtension SEQUENCE {}
}
Condition
FDD
TDD
CEmodeA
CEmodeB
Value/remark
SEQUENCE {
‘0100’H
Not present
Not present
1
r1
v1
v1
FDD
TDD
off
ce-ModeA
ce-ModeB
bw1dot4
zero
Not present
Not present
Not present
Not present
Not present
Not present
Explanation
FDD cell environment
TDD cell environment
Used for CE mode A testing
Used for CE mode B testing
ETSI
CEmodeA
CEmodeB
3GPP TS 36.508 version 15.5.0 Release 15
–
392
ETSI TS 136 508 V15.5.0 (2019-07)
SecurityModeCommand
Table 4.6.1-19: SecurityModeCommand
Derivation Path: 36.331 clause 6.2.2
Information Element
SecurityModeCommand ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE{
securityModeCommand-r8 SEQUENCE {
securityConfigSMC
nonCriticalExtension SEQUENCE {}
Value/remark
Comment
Condition
Comment
Condition
Comment
Condition
RRCTransactionIdentifier-DL
SecurityConfigSMCDEFAULT
Not present
}
}
}
}
–
SecurityModeComplete
Table 4.6.1-20: SecurityModeComplete
Derivation Path: 36.331 clause 6.2.2
Information Element
SecurityModeComplete ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
securityModeComplete-r8 SEQUENCE {
nonCriticalExtension SEQUENCE {}
}
}
Value/remark
RRCTransactionIdentifier-UL
Not checked
}
–
SecurityModeFailure
Table 4.6.1-21: SecurityModeFailure
Derivation Path: 36.331 clause 6.2.2
Information Element
SecurityModeFailure ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
securityModeFailure-r8 SEQUENCE {
nonCriticalExtension SEQUENCE {}
}
}
Value/remark
RRCTransactionIdentifier-UL
Not checked
}
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
393
ETSI TS 136 508 V15.5.0 (2019-07)
SidelinkUEInformation
Table 4.6.1-21A: SidelinkUEInformation
Derivation Path: 36.331 clause 6.2.2
Information Element
SidelinkUEInformation-r12 ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE {
sidelinkUEInformation-r12 SEQUENCE {
commRxInterestedFreq-r12
commTxResourceReq-r12 SEQUENCE {
carrierFreq-r12
destinationInfoList-r12 SEQUENCE (SIZE (1..
maxSL-Dest-r12) OF SEQUENCE {
SL-DestinationIdentity-r12
}
}
discRxInterest-r12
discTxResourceReq-r12
lateNonCriticalExtension
nonCriticalExtension SEQUENCE {}
Value/remark
Comment
set according to specific
message content.
INTEGER
(0..maxEARFCN2
)
set according to specific
message content.
INTEGER
(0..maxEARFCN2
)
The number of entries is
set according to specific
message content.
set according to specific
message content
set according to specific
message content.
set according to specific
message content.
Not Present
Not Present
}
}
}
}
ETSI
BIT STRING
(SIZE (24))
ENUMERATED
{true}
INTEGER (1..63)
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
394
ETSI TS 136 508 V15.5.0 (2019-07)
SidelinkUEInformation (V2X)
Table 4.6.1-21B: SidelinkUEInformation (V2X)
Derivation Path: 36.331 clause 6.2.2
Information Element
SidelinkUEInformation-r12 ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE {
sidelinkUEInformation-r12 SEQUENCE {
commRxInterestedFreq-r12
commTxResourceReq-r12
discRxInterest-r12
discTxResourceReq-r12
lateNonCriticalExtension
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
v2x-CommRxInterestedFreqList-r14
v2x-CommRxInterestedFreqList-r14
SEQUENCE (SIZE (1..maxFreqV2X-r14)) OF
INTEGER (0..maxFreqV2X-1-r14)
p2x-CommTxType-r14
v2x-CommTxResourceReq-r14
v2x-CommTxResourceReq-r14 SEQUENCE
(SIZE (1..maxFreqV2X-r14)) OF SEQUENCE {
carrierFreqCommTx-r14
v2x-TypeTxSync-r14
v2x-DestinationInfoList-r14 SEQUENCE
(SIZE (1..maxSL-Dest-r12)) OF SEQUENCE {
SL-DestinationIdentity-r12
}
}
nonCriticalExtension
Value/remark
Condition
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
set according to specific
message content
INTEGER
(0..maxFreq)
COND_RX
Not Present
Not Present
COND_TX
set according to specific
message content
set according to specific
message content
The number of entries is
set according to specific
message content.
set according to specific
message content
Not Present
}
}
}
}
}
}
Condition
COND_RX
COND_TX
Comment
Explanation
UE intends to receive V2X sidelink communication
UE intends to transmit V2X sidelink communication
ETSI
BIT STRING
(SIZE (24))
3GPP TS 36.508 version 15.5.0 Release 15
–
395
ETSI TS 136 508 V15.5.0 (2019-07)
UECapabilityEnquiry
Table 4.6.1-22: UECapabilityEnquiry
Derivation Path: 36.331 clause 6.2.2
Information Element
UECapabilityEnquiry ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE {
ueCapabilityEnquiry-r8 SEQUENCE {
ue-CapabilityRequest SEQUENCE (SIZE
(1..maxRAT-Capabilities)) OF RAT-Type {
RAT-Type[1]
RAT-Type[2]
RAT-Type[3]
}
nonCriticalExtension SEQUENCE {}
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
nonCriticalExtension SEQUENCE {
requestedFreqBandsNR-MRDC-r15
nonCriticalExtension SEQUENCE {}
Value/remark
Condition
RRCTransactionIdentifier-DL
1,2 or 3 entries
eutra
eutra-nr
nr
EN-DC
NR, EN_DC
Not present
EN-DC, NR
OCTET STRING
including the
FreqBandList IE
according TS 38.508-1
[67], table 4.6.4-9.
Not present
}
}
}
}
}
}
}
}
}
Condition
EN-DC
NR
Comment
Explanation
Used in E-UTRA-NR dual connectivity test cases
Used in NR test cases
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
396
UECapabilityInformation
Table 4.6.1-23: UECapabilityInformation
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.2.2
Information Element
UECapabilityInformation ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE{
ueCapabilityInformation-r8 SEQUENCE {
ue-CapabilityRAT-ContainerList SEQUENCE
(SIZE (1..maxRAT-Capabilities)) OF SEQUENCE {
rat-Type
ueCapabilityRAT-Container
ue-EUTRA-Capability SEQUENCE {
accessStratumRelease
ue-Category
pdcp-Parameters SEQUENCE {
supportedROHC-Profiles SEQUENCE {
profile0x0001
profile0x0001
profile0x0002
profile0x0002
profile0x0003
profile0x0004
profile0x0006
profile0x0101
profile0x0102
profile0x0103
profile0x0104
}
maxNumberROHC-ContextSessions
}
phyLayerParameters
rf-Parameters
measParameters
featureGroupIndicators
-- FGI 1
-- FGI 2
-- FGI 3
-- FGI 4
-- FGI 5
-- FGI 6
-- FGI 7
-- FGI 8
-- FGI 9
-- FGI 10
-- FGI 11
-- FGI 12
-- FGI 13
-- FGI 14
-- FGI 15
-- FGI 16
-- FGI 17
-- FGI 18
-- FGI 19
-- FGI 20
-- FGI 21
-- FGI 22
-- FGI 23
-- FGI 24
-- FGI 25
-- FGI 26
-- FGI 27
-- FGI 28
397
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
Condition
RRCTransactionIdentifier-UL
1 entry
Set according to specific
message content
Same as indicated in TC
applicability in TS
36.523-2 [19]
Not checked
Not checked
true
Not checked
true
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
ETSI
ROHC
ROHC
3GPP TS 36.508 version 15.5.0 Release 15
-- FGI 29
-- FGI 30
-- FGI 31
-- FGI 32
interRAT-Parameters SEQUENCE {
utraFDD
utraTDD128
utraTDD384
utraTDD768
geran
cdma2000-HRPD
cdma2000-1xRTT
cdma2000-1xRTT
}
nonCriticalExtension SEQUENCE {
phyLayerParameters-v920
interRAT-ParametersGERAN-v920
interRAT-ParametersUTRA-v920
interRAT-ParametersCDMA2000-v920
deviceType-r9
csg-ProximityIndicationParameters-r9
neighCellSI-AcquisitionParameters-r9
son-Parameters-r9
nonCriticalExtension SEQUENCE {
lateNonCriticalExtension SEQUENCE {
featureGroupIndRel9Add-r9
-- FGI 33
-- FGI 34
-- FGI 35
-- FGI 36
-- FGI 37
-- FGI 38
-- FGI 39
-- FGI 40
-- FGI 41
-- FGI 42-64
fdd-Add-UE-EUTRA-Capabilities-r9
SEQUENCE {
phyLayerParameters-r9
featureGroupIndicators-r9
-- FGI 1F
-- FGI 2F
-- FGI 3F
-- FGI 4F
-- FGI 5F
-- FGI 6F
-- FGI 7F
-- FGI 8F
-- FGI 9F
-- FGI 10F
-- FGI 11F
-- FGI 12F
-- FGI 13F
-- FGI 14F
-- FGI 15F
-- FGI 16F
-- FGI 17F
-- FGI 18F
-- FGI 19F
-- FGI 20F
-- FGI 21F
-- FGI 22F
-- FGI 23F
-- FGI 24F
-- FGI 25F
398
ETSI TS 136 508 V15.5.0 (2019-07)
Not checked
Not checked
Not checked
‘0’B (Undefined)
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
‘0’B (Undefined)
Not checked
BITSTRING 32
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
ETSI
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
3GPP TS 36.508 version 15.5.0 Release 15
-- FGI 26F
-- FGI 27F
-- FGI 28F
-- FGI 29F
-- FGI 30F
-- FGI 31F
-- FGI 32F
featureGroupIndRel9Add-r9
-- FGI 33F
-- FGI 34F
-- FGI 35F
-- FGI 36F
-- FGI 37F
-- FGI 38F
-- FGI 39F
-- FGI 40F
-- FGI 41F
-- FGI 42F-64F
interRAT-ParametersGERAN-r9
interRAT-ParametersUTRA-r9
interRAT-ParametersGERAN-r9
interRAT-ParametersCDMA2000-r9
neighCellSI-AcquisitionParameters-r9
}
tdd-Add-UE-EUTRA-Capabilities-r9
SEQUENCE {
phyLayerParameters-r9
featureGroupIndicators-r9
-- FGI 1T
-- FGI 2T
-- FGI 3T
-- FGI 4T
-- FGI 5T
-- FGI 6T
-- FGI 7T
-- FGI 8T
-- FGI 9T
-- FGI 10T
-- FGI 11T
-- FGI 12T
-- FGI 13T
-- FGI 14T
-- FGI 15T
-- FGI 16T
-- FGI 17T
-- FGI 18T
-- FGI 19T
-- FGI 20T
-- FGI 21T
-- FGI 22T
-- FGI 23T
-- FGI 24T
-- FGI 25T
-- FGI 26T
-- FGI 27T
-- FGI 28T
-- FGI 29T
-- FGI 30T
-- FGI 31T
-- FGI 32T
featureGroupIndRel9Add-r9
-- FGI 33T
399
ETSI TS 136 508 V15.5.0 (2019-07)
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
‘0’B (Undefined) if
present
FDD = TDD
FDD = TDD
BITSTRING 32
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
‘0’B (Undefined) if
present
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
BITSTRING 32
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
‘0’B (Undefined) if
present
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
FDD = TDD
BITSTRING 32
Not checked
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-- FGI 34T
-- FGI 35T
-- FGI 36T
-- FGI 37T
-- FGI 38T
-- FGI 39T
-- FGI 40T
-- FGI 41T
-- FGI 42T-64T
interRAT-ParametersGERAN-r9
interRAT-ParametersUTRA-r9
interRAT-ParametersGERAN-r9
interRAT-ParametersCDMA2000-r9
neighCellSI-AcquisitionParameters-r9
}
nonCriticalExtension SEQUENCE {
interRAT-ParametersUTRA-v9c0
nonCriticalExtension SEQUENCE {
phyLayerParameters-v9d0
nonCriticalExtension SEQUENCE {
rf-Parameters-v9e0
nonCriticalExtension SEQUENCE {}
}
}
}
400
ETSI TS 136 508 V15.5.0 (2019-07)
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
‘0’B (Undefined) if
present
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
}
nonCriticalExtension SEQUENCE {
ue-Category-v1020
Not checked
phyLayerParameters-v1020
Not checked
rf-Parameters-v1020
Not checked
measParameters-v1020
Not checked
featureGroupIndRel10-r10
-- FGI 101
-- FGI 102
-- FGI 103
-- FGI 104
-- FGI 105
-- FGI 106
-- FGI 107
-- FGI 108
-- FGI 109
-- FGI 110
-- FGI 111
-- FGI 112
-- FGI 113
-- FGI 114
-- FGI 115
-- FGI 116
-- FGI 117-132
interRAT-ParametersCDMA2000-v1020
ue-BasedNetwPerfMeasParameters-r10
interRAT-ParametersUTRA-TDD-v1020
nonCriticalExtension SEQUENCE {
fdd-Add-UE-EUTRA-Capabilities-v1060
tdd-Add-UE-EUTRA-Capabilities-v1060
rf-Parameters-v1060
nonCriticalExtension SEQUENCE {
rf-Parameters-v1090
nonCriticalExtension SEQUENCE {
BITSTRING 32
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
‘0’B (Undefined) if
present
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
401
pdcp-Parameters-v1130
phyLayerParameters-v1130
rf-Parameters-v1130
measParameters-v1130
interRAT-ParametersCDMA2000-
Not checked
Not checked
Not checked
Not checked
Not checked
otherParameters-r11
fdd-Add-UE-EUTRA-Capabilities-
Not checked
Not checked
tdd-Add-UE-EUTRA-Capabilities-
Not checked
nonCriticalExtension SEQUENCE {
phyLayerParameters-v1170
ue-Category-v1170
nonCriticalExtension SEQUENCE {
rf-Parameters-v1180
mbms-Parameters-r11
fdd-Add-UE-EUTRA-Capabilities-
Not checked
Not checked
Not checked
tdd-Add-UE-EUTRA-Capabilities-
Not checked
v1130
v1130
v1130
Not checked
Not checked
Not checked
v1180
v1180
nonCriticalExtension SEQUENCE {
ue-Category-v11a0
measParameters-v11a0
nonCriticalExtension SEQUENCE {
phyLayerParameters-v1250
rf-Parameters-v1250
rlc-Parameters-r12
ue-BasedNetwPerfMeasParameters-
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
v1250
ue-Category-v1250
wlan-IW-Parameters-r12
measParameters-v1250
dc-Parameters-r12
mbms-Parameters-v1250
mac-Parameters-r12
fdd-Add-UE-EUTRA-Capabilities-v1250
tdd-Add-UE-EUTRA-Capabilities-v1250
sl-Parameters-r12
nonCriticalExtension SEQUENCE {}
ue-CategoryDL-v1260
nonCriticalExtension {
rf-Parameters-v1270
nonCriticalExtension {
phyLayerParameters-v1280
nonCriticalExtension {
phyLayerParameters-
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
v1280
nonCriticalExtension {
ue-CategoryDL-v1310
ue-CategoryUL-v1310
pdcp-Parameters-v1310
rlc-Parameters-v1310
mac-Parameters-v1310
phyLayerParameters-
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
rf-Parameters-v1310
measParameters-v1310
dc-Parameters-v1310
sl-Parameters-v1310
scptm-Parameters-r13
ce-Parameters-r13
interRAT-
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
Not checked
laa-Parameters-r13
lwa-Parameters-r13
Not checked
Not checked
v1310
ParametersWLAN-r13
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
402
wlan-IW-Parameters-
Not checked
lwip-Parameters-r13
fdd-Add-UE-EUTRA-
Not checked
Not checked
tdd-Add-UE-EUTRA-
Not checked
ETSI TS 136 508 V15.5.0 (2019-07)
v1310
Capabilities-v1310
Capabilities-v1310
nonCriticalExtension {
ce-Parameters-v1320
rf-Parameters-v1320
nonCriticalExtension {}
}
Not checked
Not checked
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
nonCriticalExtension SEQUENCE {}
Not checked
}
}
}
}
Condition
ROHC
FDD = TDD
Explanation
Support of ROHC profile0x0001 and ROHC profile0x0002 (TS 36.523-2 table A.4.41/40 and A.4.4-1/41).
UE is not allowed to signal different values for FDD and TDD, is not checked per
default
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
403
ETSI TS 136 508 V15.5.0 (2019-07)
UEInformationRequest
Table 4.6.1-23A: UEInformationRequest
Derivation Path: 36.331 clause 6.2.2
Information Element
UEInformationRequest-r9 ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE{
ueInformationRequest-r9 SEQUENCE {
rach-ReportReq-r9
rlf-ReportReq-r9
nonCriticalExtension SEQUENCE {
lateNonCriticalExtension
nonCriticalExtension SEQUENCE {}
nonCriticalExtension SEQUENCE {
logMeasReportReq-r10
nonCriticalExtension SEQUENCE {}
nonCriticalExtension SEQUENCE {
connEstFailReportReq-r11
nonCriticalExtension SEQUENCE {}
Value/remark
Comment
RRCTransactionIdentifier-DL
FALSE
FALSE
TRUE
RLF report
Not present
Not present
true
Logged
MDT,
ConEstFail
Logged
MDT
Not present
Not present
true
Not present
Not present
}
}
}
}
}
}
}
Condition
Logged MDT
ConEstFail
RLF report
Condition
Explanation
Used for Logged MDT test cases
Used for RRC connection establishment failure report related test cases
Used for Radio Link Failure Logging test cases
ETSI
ConEstFail
3GPP TS 36.508 version 15.5.0 Release 15
–
404
ETSI TS 136 508 V15.5.0 (2019-07)
UEInformationResponse
Table 4.6.1-23B: UEInformationResponse
Derivation Path: 36.331 clause 6.2.2
Information Element
UEInformationResponse-r9 ::= SEQUENCE {
rrc-TransactionIdentifier
criticalExtensions CHOICE {
c1 CHOICE{
ueInformationResponse-r9 SEQUENCE {
rach-Report-r9 SEQUENCE {}
rlf-Report-r9 SEQUENCE {}
nonCriticalExtension SEQUENCE {
lateNonCriticalExtension
nonCriticalExtension SEQUENCE {
logMeasReport-r10 SEQUENCE {}
nonCriticalExtension SEQUENCE {
}
}
}
}
}
Value/remark
Comment
Condition
Comment
Condition
RRCTransactionIdentifier-UL
Not checked
Not checked
Not checked
Not checked
Not checked
}
-
ULHandoverPreparationTransfer
Table 4.6.1-24: ULHandoverPreparationTransfer
Derivation Path: 36.331 clause 6.2.2
Information Element
ULHandoverPreparationTransfer ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE {
ulHandoverPreparationTransfer-r8 SEQUENCE {
cdma2000-Type
meid
dedicatedInfo
nonCriticalExtension SEQUENCE {}
Value/remark
type1XRTT
Set to the 56 bit
CDMA2000 mobile
identification number of
the UE
Set according to specific
message content
Not checked
}
}
}
}
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
405
ETSI TS 136 508 V15.5.0 (2019-07)
ULInformationTransfer
Table 4.6.1-25: ULInformationTransfer
Derivation Path: 36.331 clause 6.2.2
Information Element
ULInformationTransfer ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE {
ulInformationTransfer-r8 SEQUENCE {
dedicatedInfoType CHOICE {
dedicatedInfoNAS
}
nonCriticalExtension SEQUENCE {}
Value/remark
Comment
Condition
Comment
Condition
Present but contents not
checked
Not checked
}
}
}
}
–
UEAssistanceInformation
Table 4.6.1-26: UEAssistanceInformation
Derivation Path: 36.331, Clause 6.2.2
Information Element
UEAssistanceInformation-r11 ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE{
UEAssistanceInformation-r11-IEs SEQUENCE {
powerPreferenceIndication-r11
powerPreferenceIndication-r11
laterNonCriticalExtension
nonCriticalExtension SEQUENCE {
sps-AssistanceInformation-r14 SEQUENCE {
trafficPatternInfoListSL-r14 SEQUENCE
(SIZE (1..maxTrafficPattern-r14)) OF SEQUENCE{
trafficPeriodicity-r14
timingOffset-r14
priorityInfoSL-r14
logicalChannelIdentityUL-r14
messageSize-r14
}
trafficPatternInfoListUL-r14
}
DelayBudgetReport-r14::= CHOICE {
type1
type2
}
nonCriticalExtension
}
}
}
}
}
Value/remark
lowPowerConsumption
normal
Not Present
Low_Powe
r
Normal
V2X
SL_SPS
Any allowed value
Any allowed value Any allowed value
Any allowed value
Any allowed value
Not Present
eVoLTE
DRX_Cycle
Coverage
ms0
ms0
Condition
Explanation
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Low_Power
Normal
V2X
SL_SPS
eVoLTE
DRX_Cycle
Coverage
–
406
ETSI TS 136 508 V15.5.0 (2019-07)
The UE indicates that it prefers a configuration primarily optimised for power saving
The UE indicates that it does not prefer a configuration primarily optimised for power saving
V2X Sidelink Communication
Sidelink SPS configuration
The UE Indicates it preferrs adjustment to connected mode DRX or coverage enhancement
configuration
The UE indicates that it prefers an adjustment in the connected mode DRX cycle length
The UE indicates that it prefers coverage enhancement configuration change
ULInformationTransferMRDC
Table 4.6.1-27: ULInformationTransferMRDC
Derivation Path: 36.331 clause 6.2.2
Information Element
ULInformationTransferMRDC-r15 ::= SEQUENCE {
criticalExtensions CHOICE {
c1 CHOICE {
ulInformationTransferMRDC-r15 SEQUENCE {
ul-DCCH-MessageNR-r15
lateNonCriticalExtension
nonCriticalExtension SEQUENCE {}
Value/remark
Comment
Condition
Comment
Condition
OCTET STRING
including the
MeasurementReport
message according TS
38.508-1 [67], table
4.6.1-2.
Not checked
Not checked
}
}
}
}
4.6.2
System information blocks
See subclause 4.4.3.3 in this document.
4.6.3
Radio resource control information elements
Table 4.6.3-0A: Void
Table 4.6.3-0B: Void
–
BCCH-Config-DEFAULT
Table 4.6.3-1: BCCH-Config-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
BCCH-Config-DEFAULT::= SEQUENCE {
modificationPeriodCoeff
Value/remark
n4
}
ETSI
To provide reliable
delivery of SI
change
notifications.
3GPP TS 36.508 version 15.5.0 Release 15
–
407
ETSI TS 136 508 V15.5.0 (2019-07)
CellSelectionInfoCE-r13-DEFAULT
Table 4.6.3-1AB: CellSelectionInfoCE-r13-DEFAULT
Derivation Path: 36.331 clause 6.3.4
Information Element
CellSelectionInfoCE-r13::= SEQUENCE {
q-RxLevMinCE-r13
q-QualMinRSRQ-CE-r13
Value/remark
-70 (-140 dBm)
-53 (-106 dBm)
Not present
Comment
Condition
For RF/RRM test cases
For signalling test cases
}
–
CQI-ReportAperiodic-r10-DEFAULT
Table 4.6.3-1A: CQI-ReportAperiodic-r10-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
CQI-ReportAperiodic-r10 ::=CHOICE {
setup SEQUENCE {
cqi-ReportModeAperiodic-r10
aperiodicCSI-Trigger-r10
Value/remark
rm30
rm20
FFS
Not present
}
}
Condition
CEmodeA
CEmodeB
Explanation
CE mode A test environment
CE mode B test environment
ETSI
Comment
Condition
CEmodeA
CEmodeB
3GPP TS 36.508 version 15.5.0 Release 15
–
408
ETSI TS 136 508 V15.5.0 (2019-07)
CQI-ReportConfig-DEFAULT
Table 4.6.3-2: CQI-ReportConfig-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
CQI-ReportConfig-DEFAULT ::= SEQUENCE {
cqi-ReportModeAperiodic
nomPDSCH-RS-EPRE-Offset
cqi-ReportPeriodic
cqi-ReportPeriodic CHOICE {
setup SEQUENCE {
cqi-PUCCH-ResourceIndex
cqi-pmi-ConfigIndex
Value/remark
rm30
rm20
FFS
0
Not present
0
25
CEmodeA
CEmodeB
(see Table 7.2.21A in TS 36.213)
(see Table 7.2.21C in TS 36.213)
FDD
(see Table 7.2.21B in TS 36.213)
(see Table 7.2.21B in TS 36.213)
This value for
TDD is selected
together with cqipmi-ConfigIndex
based on TDD
configuration 1.
FDD
TDD
NULL
483
484
simultaneousAckNackAndCQI
Condition
CQI_PERIO
DIC
24
cqi-FormatIndicatorPeriodic CHOICE {
widebandCQI
}
ri-ConfigIndex
Comment
TDD
FALSE
}
}
}
Condition
CQI_PERIODIC
FDD
TDD
CEmodeA
CEmodeB
–
Explanation
When periodic CQI reporting should be enabled
FDD cell environment
TDD cell environment
CE mode A test environment
CE mode B test environment
CQI-ReportConfig-r10-DEFAULT
Table 4.6.3-2AA: CQI-ReportConfig-r10-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
CQI-ReportConfig-r10 ::= SEQUENCE {
cqi-ReportAperiodic-r10
nomPDSCH-RS-EPRE-Offset
cqi-ReportPeriodic-r10
pmi-RI-Report-r9
csi-SubframePatternConfig-r10
Value/remark
CQI-ReportAperiodic-r10DEFAULT
0
Not present
CQI-ReportPeriodic-r10DEFAULT
Not present
Not present
}
ETSI
Comment
Condition
CQI_PERI
ODIC
3GPP TS 36.508 version 15.5.0 Release 15
Condition
CQI_PERIODIC
409
Explanation
When periodic CQI reporting should be enabled
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
–
410
ETSI TS 136 508 V15.5.0 (2019-07)
CQI-ReportConfig-v1130-DEFAULT
Table 4.6.3-2ABA: CQI-ReportConfig-v1130-DEFAULT
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.2
Information Element
CQI-ReportConfig-v1130 ::= SEQUENCE {
cqi-ReportPeriodic-v1130 SEQUENCE {
simultaneousAckNackAndCQI-Format3-r11
cqi-ReportPeriodicProcExtToReleaseList-r11
cqi-ReportPeriodicProcExtToAddModList-r11
SEQUENCE (SIZE (1..maxCQI-ProcExt-r11)) OF
SEQUENCE {
cqi-ReportPeriodicProcExtId-r11[1] SEQUENCE {
cqi-ReportPeriodicProcExtId-r11
cqi-pmi-ConfigIndex-r11
cqi-FormatIndicatorPeriodic-r11 CHOICE {
widebandCQI-r11 SEQUENCE {
csi-ReportMode-r11
}
subbandCQI-r11 SEQUENCE {
k
periodicityFactor-r11
}
}
ri-ConfigIndex-r11
csi-ConfigIndex-r11 CHOICE {
release
setup SEQUENCE {
cqi-pmi-ConfigIndex2-r11
ri-ConfigIndex2-r11
}
}
}
}
}
cqi-ReportBoth-r11 SEQUENCE {
csi-IM-ConfigToReleaseList-r11
csi-IM-ConfigToAddModList-r11 SEQUENCE (SIZE
(1..maxCSI-IM-r11)) OF SEQUENCE {
csi-IM-ConfigId-r11[1]
resourceConfig-r11[1]
subframeConfig-r11[1]
}
csi-ProcessToReleaseList-r11
csi-ProcessToAddModList-r11SEQUENCE (SIZE
(1..maxCSI-Proc-r11)) OF SEQUENCE {
csi-ProcessId-r11[1]
csi-RS-ConfigNZPId-r11[1]
csi-IM-ConfigId-r11[1]
p-C-AndCBSRList-r11[1] SEQUENCE (SIZE
(1..2)) OF SEQUENCE {
p-C-r11[1]
codebookSubsetRestriction-r11[1]
}
cqi-ReportBothProc-r11[1] SEQUENCE {
ri-Ref-CSI-ProcessId-r11
pmi-RI-Report-r11
}
cqi-ReportPeriodicProcId-r11[1]
cqi-ReportAperiodicProc-r11[1] SEQUENCE {
cqi-ReportModeAperiodic-r11
trigger01-r11
trigger10-r11
trigger11-r11
}
}
}
411
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
Condition
Not present
Not present
1 entry
1
Not present
Not present
Not present
Not present
Not present
NULL
Not present
Not present
Not present
1 entry
1
2
2
1
3
Not present
1 entry
1
1
1
1 entry
-6
1111111
1
Not present
1
Not present
Not present
Not present
Not present
ETSI
FDD
TDD
FDD
TDD
3GPP TS 36.508 version 15.5.0 Release 15
412
ETSI TS 136 508 V15.5.0 (2019-07)
}
Condition
FDD
TDD
Explanation
FDD cell environment
TDD cell environment
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
413
ETSI TS 136 508 V15.5.0 (2019-07)
CQI-ReportConfig-v1130-eIMTA
Table 4.6.3-2ABB: CQI-ReportConfig-v1130-eIMTA
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.2
Information Element
CQI-ReportConfig-v1130-eIMTA ::= SEQUENCE {
cqi-ReportPeriodic-v1130 SEQUENCE {
simultaneousAckNackAndCQI-Format3-r11
cqi-ReportPeriodicProcExtToReleaseList-r11
cqi-ReportPeriodicProcExtToAddModList-r11
SEQUENCE (SIZE (1..maxCQI-ProcExt-r11)) OF
SEQUENCE {
cqi-ReportPeriodicProcExtId-r11[1] SEQUENCE {
cqi-ReportPeriodicProcExtId-r11
cqi-pmi-ConfigIndex-r11
cqi-FormatIndicatorPeriodic-r11 CHOICE {
widebandCQI-r11 SEQUENCE {
csi-ReportMode-r11
}
subbandCQI-r11 SEQUENCE {
k
periodicityFactor-r11
}
}
ri-ConfigIndex-r11
csi-ConfigIndex-r11 CHOICE {
release
setup SEQUENCE {
cqi-pmi-ConfigIndex2-r11
ri-ConfigIndex2-r11
}
}
}
}
}
cqi-ReportBoth-r11 SEQUENCE {
csi-IM-ConfigToReleaseList-r11
csi-IM-ConfigToAddModList-r11 SEQUENCE (SIZE
(1..maxCSI-IM-r11)) OF SEQUENCE {
csi-IM-ConfigId-r11[1]
resourceConfig-r11[1]
subframeConfig-r11[1]
}
csi-ProcessToReleaseList-r11
csi-ProcessToAddModList-r11SEQUENCE (SIZE
(1..maxCSI-Proc-r11)) OF SEQUENCE {
csi-ProcessId-r11[1]
csi-RS-ConfigNZPId-r11[1]
csi-IM-ConfigId-r11[1]
p-C-AndCBSRList-r11[1] SEQUENCE (SIZE
(1..2)) OF SEQUENCE {
p-C-r11[1]
codebookSubsetRestriction-r11[1]
}
cqi-ReportBothProc-r11[1] SEQUENCE {
ri-Ref-CSI-ProcessId-r11
pmi-RI-Report-r11
}
cqi-ReportPeriodicProcId-r11[1]
cqi-ReportAperiodicProc-r11[1] SEQUENCE {
cqi-ReportModeAperiodic-r11
trigger01-r11
trigger10-r11
trigger11-r11
}
alternativeCodebookEnabledFor4TXProc-r12
csi-IM-ConfigIdList-r12[1] CHOICE {
414
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
Condition
Not present
Not present
1 entry
1
Not present
Not present
Not present
Not present
Not present
NULL
Not present
Not present
Not present
1 entry
1
2
2
1
3
Not present
1 entry
1
1
1
1 entry
-6
1111111
1
Not present
1
Not present
Not present
Not present
Not present
Not present
ETSI
FDD
TDD
FDD
TDD
3GPP TS 36.508 version 15.5.0 Release 15
Setup SEQUENCE (SIZE (1..2)) OF{
CSI-IM-ConfigId-r12[1]
}
}
cqi-ReportAperiodicProc2-r12[1] CHOICE {
setup SEQUENCE {
cqi-ReportModeAperiodic-r11
trigger01-r11
trigger10-r11
trigger11-r11
}
}
}
}
415
ETSI TS 136 508 V15.5.0 (2019-07)
1 entry
Not present
Not present
Not present
Not present
Not present
}
Condition
FDD
TDD
–
Explanation
FDD cell environment
TDD cell environment
CQI-ReportConfig-v1250-DEFAULT
Table 4.6.3-2ACA: CQI-ReportConfig-v1250-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
CQI-ReportConfig-v1250
CQI-ReportConfig-v1250 ::= SEQUENCE {
csi-SubframePatternConfig-r12 CHOICE {
setup SEQUENCE {
csi-MeasSubframeSets-r12
}
}
cqiCQI-ReportBoth-v1250
cqiCQI-ReportBoth-v1250 SEQUENCE {
csi-IM-ConfigToReleaseListExt-r12
csi-IM-ConfigToAddModListExt-r12 SEQUENCE {
csi-IM-ConfigId-v1250[1]
resourceConfig-r12[1]
subframeConfig-r12[1]
}
}
cqi-ReportAperiodic-v1250
altCQI-Table-r12
Value/remark
Not present
Condition
DL
256QAM
0001100111
Not present
Not present
1 entry
1
2
2
1
3
Not present
Not present
allSubframes
}
Condition
FDD
TDD
TM10
DL 256QAM
Comment
Explanation
FDD cell environment
TDD cell environment
Transmission mode 10
When DL 256QAM is used
ETSI
DL
256QAM
FDD
TDD
FDD
TDD
DL
256QAM
3GPP TS 36.508 version 15.5.0 Release 15
–
416
ETSI TS 136 508 V15.5.0 (2019-07)
CQI-ReportConfigSCell-r10-DEFAULT
Table 4.6.3-2AB: CQI-ReportConfigSCell-r10-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
CQI-ReportConfigSCell-r10 ::= SEQUENCE {
cqi-ReportModeAperiodic-r10
nomPDSCH-RS-EPRE-Offset-r10
cqi-ReportPeriodicSCell-r10
pmi-RI-Report-r10
Value/remark
Comment
rm30
0
Not present
CQI-ReportPeriodic-r10DEFAULT
Not present
Condition
CQI_PERI
ODIC
}
Condition
CQI_PERIODIC
–
Explanation
When periodic CQI reporting should be enabled
CQI-ReportPeriodic-r10-DEFAULT
Table 4.6.3-2AC: CQI-ReportPeriodic-r10-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
CQI-ReportPeriodic-r10 ::= CHOICE {
setup SEQUENCE {
cqi-PUCCH-ResourceIndex-r10
cqi-PUCCH-ResourceIndexP1-r10
cqi-pmi-ConfigIndex
cqi-FormatIndicatorPeriodic-r10 CHOICE {
widebandCQI-r10 SEQUENCE {
csi-ReportMode-r10
}
}
ri-ConfigIndex
Value/remark
0
Not present
25
24
Not present
484
FALSE
Not present
Not present
}
}
Condition
FDD
TDD
SCell_Config
Condition
FDD
TDD
Not present
483
simultaneousAckNackAndCQI
cqi-Mask-r9
csi-ConfigIndex-r10
Comment
Explanation
FDD cell environment
TDD cell environment
CQI-ReportPeriodic configuration for SCell.
ETSI
SCell_Conf
ig
FDD and
NOT
SCell_Conf
ig
TDD and
NOT
SCell_Conf
ig
3GPP TS 36.508 version 15.5.0 Release 15
417
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.6.3-2AD: Void
Table 4.6.3-2AE: Void
–
CSI-RS-ConfigNZP-r11-DEFAULT
Table 4.6.3-2AF: CSI-RS-ConfigNZP-r11-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
CSI-RS-ConfigNZP-r11 ::= SEQUENCE {
csi-RS-ConfigNZPId-r11
antennaPortsCount-r11
resourceConfig-r11
subframeConfig-r11
scramblingIdentity-r11
qcl-CRS-Info-r11 SEQUENCE {
qcl-ScramblingIdentity-r11
crs-PortsCount-r11
mbsfn-SubframeConfigList-r11 CHOICE {
release
setup SEQUENCE {
subframeConfigList
}
}
}
Value/remark
Comment
1
an2
0
0
1
3
0
Condition
FDD
TDD
FDD
TDD
0
n2
NULL
Not present
}
Condition
FDD
TDD
–
Explanation
FDD cell environment
TDD cell environment
CSI-RS-ConfigZP-r11-DEFAULT
Table 4.6.3-2AG: CSI-RS-ConfigZP-r11-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
CSI-RS-ConfigZP-r11 ::= SEQUENCE {
csi-RS-ConfigZPId-r11
resourceConfigList-r11
subframeConfig-r11
Value/remark
1
0010000000000000
1
3
}
Condition
FDD
TDD
Explanation
FDD cell environment
TDD cell environment
ETSI
Comment
Condition
FDD
TDD
3GPP TS 36.508 version 15.5.0 Release 15
–
418
ETSI TS 136 508 V15.5.0 (2019-07)
DMRS-Config-r11-DEFAULT
Table 4.6.3-2AH: DMRS-Config-r11-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
DMRS-Config-r11 ::= CHOICE {
release
setup SEQUENCE {
scramblingIdentity-r11
scramblingIdentity2-r11
}
}
–
Value/remark
Comment
Condition
Comment
Condition
Comment
Condition
NULL
0
1
DRB-ToAddModList-RECONFIG
Table 4.6.3-2A: DRB-ToAddModList-RECONFIG
Derivation Path: 36.331 clause 6.3.2
Information Element
DRB-ToAddModList ::= SEQUENCE (SIZE
(1..maxDRB)) OF SEQUENCE {
eps-BearerIdentity[1]
drb-Identity[1]
pdcp-Config[1]
rlc-Config[1]
logicalChannelIdentity[1]
logicalChannelConfig[1]
eps-BearerIdentity[2]
drb-Identity[2]
pdcp-Config[2]
rlc-Config[2]
logicalChannelIdentity[2]
logicalChannelConfig[2]
Value/remark
2 Entries
Not present
1
Not present
RLC-Config-DRB-AMRECONFIG
Not present
Not present
Not present
2
Not present
RLC-Config-DRB-AMRECONFIG
Not present
Not present
}
–
EPDCCH-Config-r11-DEFAULT
Table 4.6.3-2B: EPDCCH-Config-r11-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
EPDCCH-Config-r11 ::= SEQUENCE{
config-r11{
setup SEQUENCE {
subframePatternConfig-r11{ }
subframePatternConfig-r11{
setup SEQUENCE {
subframePattern-r11 CHOICE {
subframePatternFDD-r10
subframePatternTDD-r10{
subframeConfig1-5-r10
Value/remark
Not present
CEmodeA,
CEmodeB
00000000000000000000
00000000000000000000
1111111110
1111111101
1111111011 1111110111
FDD
FDD AND
TM9
TDD
0000000000 0000000000
1100111001 1100111001
ETSI
TM9
3GPP TS 36.508 version 15.5.0 Release 15
419
ETSI TS 136 508 V15.5.0 (2019-07)
}
}
}
}
startSymbol-r11
setConfigToReleaseList-r11
setConfigToAddModList-r11 SEQUENCE {
setConfigId-r11[1]
transmissionType-r11[1]
resourceBlockAssignment-r11[1] SEQUENCE{
numberPRB-Pairs-r11
resourceBlockAssignment-r11
}
dmrs-ScramblingSequenceInt-r11[1]
pucch-ResourceStartOffset-r11[1]
re-MappingQCL-ConfigListId-r11[1]
setConfigId-r11[2]
transmissionType-r11[2]
resourceBlockAssignment-r11[2] SEQUENCE{
numberPRB-Pairs-r11
resourceBlockAssignment-r11
}
dmrs-ScramblingSequenceInt-r11[2]
pucch-ResourceStartOffset-r11[2]
re-MappingQCL-ConfigListId-r11[2]
}
setConfigToAddModList-r11 SEQUENCE {
setConfigId-r11[1]
transmissionType-r11[1]
resourceBlockAssignment-r11[1] SEQUENCE{
numberPRB-Pairs-r11
resourceBlockAssignment-r11
Not present
2
Not present
2 entry
0
distributed
localized
n4
n2
n8
101001000101101110
10010011000
11100100101110110011
001101100
0
0
Not present
0
1
distributed
localized
TM9
TM10
TM9
TM10
TM9
TM10
TM10
TM9,
TM10
n8
11100100101110110011
001101100
0
0
Not present
0
1 entry
TM10
CEmodeA,
CEmodeB
0
distributed
n2
1110
0000
ETSI
SIG
RF
3GPP TS 36.508 version 15.5.0 Release 15
}
dmrs-ScramblingSequenceInt-r11[1]
pucch-ResourceStartOffset-r11[1]
re-MappingQCL-ConfigListId-r11[1]
numberPRB-Pairs-v1310 CHOICE[1] {
Setup
}
mpdcch-config-r13 CHOICE[1] {
setup SEQUENCE {
csi-NumRepetitionCE-r13
mpdcch-pdsch-HoppingConfig-r13
mpdcch-StartSF-UESS-r13 CHOICE {
fdd-r13
tdd-r13
}
mpdcch-NumRepetition-r13
mpdcch-Narrowband-r13
420
0
0
Not present
n6
sf1
off
v1
v1
r1
5
4
7
2
1
Value as specified in TS
36.523-3 clause 7.3.3.9
}
}
}
}
}
}
Condition
FDD
TDD
TM9
TM10
CEmodeA
CEmodeB
RF
SIG
20 MHz BW
15 MHz BW
10 MHz BW
5 MHz BW
3 MHz BW
1.4 MHz BW
ETSI TS 136 508 V15.5.0 (2019-07)
Explanation
FDD cell environment
TDD cell environment
Transmission mode 9
Transmission mode 10
CE mode A test environment
CE mode B test environment
Used for RF, performance and RRM testing
Used for protocol testing
Used for cells with 20 MHz bandwidth
Used for cells with 15 MHz bandwidth
Used for cells with 10 MHz bandwidth
Used for cells with 5 MHz bandwidth
Used for cells with 3 MHz bandwidth
Used for cells with 1.4 MHz bandwidth
ETSI
FDD
TDD
No repetitions to
reduce impact on
legacy E-UTRA
test cases for
category M1 UEs.
Narrowband index
4
Narrowband index
3
Narrowband index
6
Narrowband index
1
Narrowband index
0
RF and 20
MHz BW
RF and
(15 MHz
BW or 5
MHz BW)
RF and 10
MHz BW
RF and 3
MHz BW
RF and 1.4
MHz BW
SIG
3GPP TS 36.508 version 15.5.0 Release 15
–
421
ETSI TS 136 508 V15.5.0 (2019-07)
EPDCCH-Config-r11-eIMTA
Table 4.6.3-2C: EPDCCH-Config-r11-eIMTA
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.2
Information Element
EPDCCH-Config-r11-eIMTA ::= SEQUENCE{
config-r11{
setup SEQUENCE {
subframePatternConfig-r11{
setup SEQUENCE {
subframePattern-r11 CHOICE {
subframePatternFDD-r10
subframePatternTDD-r10{
subframeConfig1-5-r10
422
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
00000000000000000000
00000000000000000000
1111111110 1111111101
1111111011 1111110111
Comment
Condition
FDD
FDD, TM9
TDD
0000000000 0000000000
1100111001 1100111001
TM9
}
}
}
}
startSymbol-r11
setConfigToReleaseList-r11
setConfigToAddModList-r11 SEQUENCE {
setConfigId-r11[1]
transmissionType-r11[1]
resourceBlockAssignment-r11[1] SEQUENCE{
numberPRB-Pairs-r11
resourceBlockAssignment-r11
}
dmrs-ScramblingSequenceInt-r11[1]
pucch-ResourceStartOffset-r11[1]
re-MappingQCL-ConfigListId-r11[1]
csi-RS-ConfigZPId2-r12[1]
csi-RS-ConfigZPId2-r12[1] CHOICE {
Setup {
CSI-RS-ConfigZPId-r11[1]
}
}
setConfigId-r11[2]
transmissionType-r11[2]
resourceBlockAssignment-r11[2] SEQUENCE{
numberPRB-Pairs-r11
resourceBlockAssignment-r11
}
dmrs-ScramblingSequenceInt-r11[2]
pucch-ResourceStartOffset-r11[2]
re-MappingQCL-ConfigListId-r11[2]
csi-RS-ConfigZPId2-r12[2]
csi-RS-ConfigZPId2-r12[2] CHOICE {
Setup {
CSI-RS-ConfigZPId-r11[2]
}
Not present
2
Not present
2 entry
0
distributed
localized
n4
n2
n8
101001000101101110
10010011000
11100100101110110011
001101100
0
0
Not present
0
Not present
TM9
TM10
TM9
TM10
TM9
TM10
TM10
1
TM10
1
distributed
localized
TM9, TM10
n8
11100100101110110011
001101100
0
0
Not present
0
Not present
1
}
}
}
ETSI
TM10
TM10
3GPP TS 36.508 version 15.5.0 Release 15
423
ETSI TS 136 508 V15.5.0 (2019-07)
}
Condition
FDD
TDD
TM9
TM10
–
Explanation
FDD cell environment
TDD cell environment
Transmission mode 9
Transmission mode 10
FreqHoppingParameters-r13-DEFAULT
Table 4.6.3-2D: FreqHoppingParameters-r13-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
FreqHoppingParameters-r13-DEFAULT::=
SEQUENCE {
mpdcch-pdsch-HoppingNB-r13
interval-DLHoppingConfigCommonModeA-r13
CHOICE {}
interval-DLHoppingConfigCommonModeB-r13
CHOICE {
interval-ULHoppingConfigCommonModeA-r13
CHOICE {
interval-FDD-r13
interval-TDD-r13
}
interval-ULHoppingConfigCommonModeB-r13
CHOICE {
interval-FDD-r13
interval-TDD-r13
}
mpdcch-pdsch-HoppingOffset-r13
}
Condition
FDD
TDD
–
Value/remark
Comment
Condition
Not present
Not present
Not present
int4
int5
FDD
TDD
int16
int20
FDD
TDD
Not present
Explanation
FDD cell environment
TDD cell environment
HighSpeedConfig-r14-DEFAULT
Table 4.6.3-2E: HighSpeedConfig-r14-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
HighSpeedConfig-r14-DEFAULT::= SEQUENCE {
highSpeedEnhancedMeasFlag-r14
highSpeedEnhancedDemodulationFlag-r14
}
Value/remark
true
true
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
424
ETSI TS 136 508 V15.5.0 (2019-07)
HighSpeedConfigSCell-r14-DEFAULT
Table 4.6.3-2F: HighSpeedConfigSCell-r14-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
HighSpeedConfig-r14-DEFAULT::= SEQUENCE {
highSpeedEnhancedDemodulationFlag-r14
}
–
Value/remark
Comment
Condition
Comment
Condition
true
PCCH-Config-DEFAULT
Table 4.6.3-3: PCCH-Config-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PCCH-Config-DEFAULT::= SEQUENCE {
defaultPagingCycle
nB
Value/remark
rf128
Typical value in
real network.
oneT
}
–
PCCH-Config-v1310-DEFAULT
Table 4.6.3-3A: PCCH-Config-v1310-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PCCH-Config-v1310DEFAULT::= SEQUENCE {
paging-narrowBands-r13
mpdcch-NumRepetition-Paging-r13
nB-v1310
Value/remark
1
r16
Not present
Comment
Condition
Not present
means that nB
value in PDCCHConfig applies.
}
Condition
RF
SIG
–
Explanation
Used for RF, performance and RRM testing
Used for protocol testing
PHICH-Config-DEFAULT
Table 4.6.3-4: PHICH-Config-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PHICH-Config-DEFAULT ::= SEQUENCE {
phich-Duration
phich-Resource
Value/remark
normal
one
}
ETSI
Comment
Ng=1 has been
selected to ensure
enough PHICH
resources from
the real network
point of view.
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
425
ETSI TS 136 508 V15.5.0 (2019-07)
PDSCH-ConfigCommon-DEFAULT
Table 4.6.3-5: PDSCH-ConfigCommon-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PDSCH-ConfigCommon-DEFAULT ::= SEQUENCE {
referenceSignalPower
p-b
Value/remark
Comment
Condition
18 (dBm)
0 ( ρB
/ ρA
1 ( ρB / ρ A
= 1)
1TX
= 1)
2TX, 4TX
}
Condition
1TX
2TX
4TX
–
Explanation
1 SS Tx antenna environment
2 SS Tx antenna environment
4 SS Tx antenna environment
PDSCH-ConfigCommon-v1310-DEFAULT
Table 4.6.3-5A: PDSCH-ConfigCommon-v1310-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PDSCH-ConfigCommon-v1310-DEFAULT ::=
SEQUENCE {
pdsch-maxNumRepetitionCEmodeA-r13
pdsch-maxNumRepetitionCEmodeB-r13
Value/remark
Comment
r16
Minimum value
[r32]
Maximium value
r192
Minimum value
[2048]
Maximium value
Condition
CEmodeA
AND SIG
CEmodeA
AND RF
CEmodeB
AND SIG
CEmodeB
AND RF
}
Condition
CEmodeA
CEmodeB
RF
SIG
–
Explanation
CE mode A test environment
CE mode B test environment
Value used for RF, performance and RRM testing
Value used for protocol testing
PDSCH-ConfigDedicated-DEFAULT
Table 4.6.3-6: PDSCH-ConfigDedicated-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PDSCH-ConfigDedicated-DEFAULT ::= SEQUENCE
{
p-a
Value/remark
dB-3 for signalling test
cases;
dB0 for others
dB-3
}
ETSI
Comment
dB-3 for signalling
test cases to
reduce
interference from
PDSCH of intrafrequency
neighbour cells
Condition
1TX
2TX, 4TX
3GPP TS 36.508 version 15.5.0 Release 15
–
426
ETSI TS 136 508 V15.5.0 (2019-07)
PDSCH-ConfigDedicated-v1130-DEFAULT
Table 4.6.3-6AA: PDSCH-ConfigDedicated-v1130-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PDSCH-ConfigDedicated-v1130 ::= SEQUENCE {
dmrs-ConfigPDSCH-r11
qcl-Operation
re-MappingQCLConfigToReleaseList-r11
re-MappingQCLConfigToAddModList-r11
SEQUENCE (SIZE (1..maxRE-MapQCL-r11)) OF
SEQUENCE {
pdsch-RE-MappingQCL-ConfigId-r11[1]
optionalSetOfFields-r11[1] SEQUENCE {
crs-PortsCount-r11
crs-FreqShift-r11
mbsfn-SubframeConfigList-r11{
setup SEQUENCE {
subframeConfigList
}
}
pdsch-Start-r11
}
csi-RS-ConfigZPId-r11[1]
qcl-CSI-RS-ConfigNZPId-r11[1]
Value/remark
Condition
DMRS-Config-r11DEFAULT
typeB
Not present
1 entry
1
0
TM10
Not present
Not present
Not present
Not present
2
1
1
}
}
Condition
TM10
Comment
Explanation
Transmission mode 10
ETSI
[TM10
3GPP TS 36.508 version 15.5.0 Release 15
–
427
ETSI TS 136 508 V15.5.0 (2019-07)
PhysicalConfigDedicatedSCell-r10-DEFAULT
Table 4.6.3-6A: PhysicalConfigDedicatedSCell-r10-DEFAULT
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.2
Information Element
PhysicalConfigDedicatedSCell-r10-DEFAULT ::=
SEQUENCE {
nonUL-Configuration-r10 SEQUENCE {
antennaInfo-r10 SEQUENCE {
transmissionMode-r10
codebookSubsetRestriction-r10
ue-TransmitAntennaSelection
428
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
tm1
tm2
Not present
release
Comment
Condition
1TX
2TX
}
crossCarrierSchedulingConfig-r10
csi-RS-Config-r10
pdsch-ConfigDedicated-r10
}
ul-Configuration-r10
ul-Configuration-r10 SEQUENCE {
antennaInfoUL-r10
pusch-ConfigDedicatedSCell-r10
uplinkPowerControlDedicatedSCell-r10
cqi-ReportConfigSCell-r10
soundingRS-UL-ConfigDedicated-r10
soundingRS-UL-ConfigDedicated-v1020
soundingRS-UL-ConfigDedicatedAperiodic-r10
}
cqi-ReportConfigSCell-v1250
pucch-Cell-r13
pucch-SCell
pucch-SCell CHOICE {
setup SEQUENCE {
pucch-ConfigDedicated-r13
schedulingRequestConfig-r13
tpc-PDCCH-ConfigPUCCH-SCell-r13
pusch-ConfigDedicated-r13
uplinkPowerControlDedicated-r13
}
}
crossCarrierSchedulingConfig-r13
pdcch-ConfigSCell-r13
cqi-ReportConfig-v1310
pdsch-ConfigDedicated-v1310
soundingRS-UL-ConfigDedicated-v1310
soundingRS-UL-ConfigDedicatedUpPTsExt-r13
soundingRS-UL-ConfigDedicatedAperiodic-v1310
soundingRS-ULConfigDedicatedAperiodicUpPTsExt-r13
csi-RS-Config-v1310
Laa-ScellConfiguration-r13
Laa-ScellConfiguration-r13 SEQUENCE {
subframeStartPosition
Not present
Not present
PDSCHConfigDedicatedDEFAULT
Not present
UL CA
Not present
Not present
UplinkPowerControlDedic
atedSCell-r10-DEFAULT
CQI-ReportConfigSCellr10-DEFAULT
Not present
Not present
Not present
Not present
CQI-ReportConfig-v1250DEFAULT
Not present
true
DL
256QAM
PUCCHSCell1
Not present
PUCCHSCell
PUCCHConfigDedicated-r13DEFAULT
SchedulingRequestConfi
gSCell-r13-DEFAULT
TPC-PDCCHConfigSCell-r13DEFAULT
Not present
UplinkPowerControlDedic
atedSCell-v1310DEFAULT
Not present
Not present
Not present
Not present
Not present
Not present
Not present
Not present
Not present
Not present
LAA
‘s0’
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Laa-SCellSubframeConfig
}
csi-RS-ConfigNZPToAddModListExt-r13
csi-RS-ConfigNZPToReleaseListExt-r13
laa-SCellConfiguration-v1430 SEQUENCE {
pdcch-ConfigLAA-r14 SEQUENCE {
maxNumberOfSchedSubframes-Format0B-r14
maxNumberOfSchedSubframes-Format4B-r14
}
}
typeB-SRS-TPC-PDCCH-Config-r14
uplinkPUSCH-LessPowerControlDedicated-v14xy
SEQUENCE {
p0-UE-PeriodicSRS
p0-UE-AperiodicSRS
accumulationEnabled
}
soundingRS-UL-PeriodicConfigDedicatedList-r14
SEQUENCE (SIZE (1..2)) OF SEQUENCE {
soundingRS-UL-ConfigDedicated
}
soundingRS-ULPeriodicConfigDedicatedUpPTsExtList-r14
soundingRS-UL-AperiodicConfigDedicatedList-r14
soundingRS-UL-ConfigDedicatedApUpPTsExtListr14
}
Condition
UL CA
1TX
2TX
DL 256QAM
LAA
SRS-Switching
PUCCH-SCell1
PUCCH-SCell
eLAA
429
ETSI TS 136 508 V15.5.0 (2019-07)
‘00000000’
Not present
Not present
eLAA
sf4
sf4
SRS-TPC-PDCCHConfig-r14-DEFAULT
condition SETUP
SRSSwitching
SRSSwitching
0
0
true
SRSSwitching
SoundingRS-UlConfigDedicatedDEFAULT
Not Present
Not Present
Not Present
Explanation
When UL Carrier Aggregation is used
1 SS Tx antenna environment
2 SS Tx antenna environment
When DL 256QAM is used
For LAA test cases
SRS transmission is switched to a PUSCH-less TDD SCell
When PUCCH feedback of this SCell is sent on the PUCCH SCell
When this SCell is configured as PUCCH SCell
When this SCell is configured as uplink LAA SCell
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
430
ETSI TS 136 508 V15.5.0 (2019-07)
PhysicalConfigDedicatedSCell-r10-eIMTA
Table 4.6.3-6B: PhysicalConfigDedicatedSCell-r10-eIMTA
Derivation Path: 36.331 clause 6.3.2
Information Element
PhysicalConfigDedicatedSCell-r10-eIMTA ::=
SEQUENCE {
nonUL-Configuration-r10 SEQUENCE {
antennaInfo-r10 SEQUENCE {
transmissionMode-r10
codebookSubsetRestriction-r10
ue-TransmitAntennaSelection
Value/remark
tm1
tm2
Not present
release
Comment
Condition
1TX
2TX
}
crossCarrierSchedulingConfig-r10
csi-RS-Config-r10
pdsch-ConfigDedicated-r10
}
ul-Configuration-r10
ul-Configuration-r10 SEQUENCE {
antennaInfoUL-r10
pusch-ConfigDedicatedSCell-r10
uplinkPowerControlDedicatedSCell-r10
cqi-ReportConfigSCell-r10
soundingRS-UL-ConfigDedicated-r10
soundingRS-UL-ConfigDedicated-v1020
soundingRS-UL-ConfigDedicatedAperiodic-r10
Not present
Not present
PDSCHConfigDedicatedDEFAULT
Not present
UL CA
Not present
Not present
UplinkPowerControlDedic
atedSCell-r10-DEFAULT
CQI-ReportConfigSCellr10-DEFAULT
Not present
Not present
Not present
}
antennaInfo-v1250
eimta-MainConfigSCell-r12
cqi-ReportConfigSCell-v1250
uplinkPowerControlDedicatedSCell-v1250
csi-RS-Config-v1250
Not present
EIMTAMainConfigServCell-r12DEFAULT
Not present
CQI-ReportConfig-v1250DEFAULT
Not present
UplinkPowerControlDedic
ated-v1250-DEFAULT
Not present
Not present
}
Condition
UL CA
1TX
2TX
eIMTA
Explanation
When UL Carrier Aggregation is used.
1 SS Tx antenna environment
2 SS Tx antenna environment
eIMTA cell environment
ETSI
eIMTA
eIMTA
eIMTA
eIMTA
eIMTA
3GPP TS 36.508 version 15.5.0 Release 15
–
431
ETSI TS 136 508 V15.5.0 (2019-07)
PRACH-Config-DEFAULT
Table 4.6.3-7: PRACH-Config-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PRACH-Config-DEFAULT ::= SEQUENCE {
rootSequenceIndex
Value/remark
See clause 4.4.2, Table
4.4.2-1A and clause
6.3.2.2 Table 6.3.2.2-2
See clause 4.4.2, Table
4.4.2-1A and clause
6.3.2.2 Table 6.3.2.2-2
prach-ConfigInfo SEQUENCE {
prach-ConfigIndex
3
51
highSpeedFlag
FALSE (Unrestricted set)
zeroCorrelationZoneConfig
5 (Ncs configuration = 5)
4 (Ncs configuration = 4)
prach-FreqOffset
See subclause 4.6.8
Comment
Condition
See table 5.7.2-4
in TS 36.211for
PRACH format 03
See table 5.7.2-5
in TS 36.211 for
PRACH format 4
FDD
Typical value in
real network for
FDD (see table
5.7.1-1 and 5.7.12 in TS 36.211)
Typical value in
real network for
TDD (see table
5.7.1-3 and 5.7.14 in TS 36.211)
High speed train
configuration
doesn’t apply by
default.
Assuming cell
radius is up to
approximately 3
km.
Assuming cell
radius is up to
approximately 1
km.
Channelbandwidthdependent
parameter
FDD
TDD
TDD
FDD
TDD
}
}
Note: Although PRACH format 0-3 is applicable for both FDD and TDD, the PRACH format 4 is used as default for
testing for TDD.
Condition
FDD
TDD
Explanation
FDD cell environment
TDD cell environment
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
432
ETSI TS 136 508 V15.5.0 (2019-07)
PRACH-Config-v1310-DEFAULT
Table 4.6.3-7A: PRACH-Config-v1310-DEFAULT
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.2
Information Element
PRACH-Config-v1310-DEFAULT ::= SEQUENCE {
rsrp-ThresholdsPrachInfoList-r13 SEQUENCE
(SIZE(1..3)) OF {}
rsrp-ThresholdsPrachInfoList-r13 SEQUENCE
(SIZE(1..3)) OF {
RSRP-Range[1]
}
mpdcch-startSF-CSS-RA-r13 CHOICE {
fdd-r13
tdd-r13
}
prach-HoppingOffset-r13
prach-ParametersListCE-r13 SEQUENCE
(SIZE(1..maxCE-Level-r13)) OF SEQUENCE {
PRACH-ParametersCE-r13[1] SEQUENCE {
prach-ConfigIndex-r13[1]
433
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
Not present
1 entry
42
v1
v1
Not present
2 entries
Threshold values
to determine the
CE level for
PRACH
-99dBm
ENUMERATED {
v1, v2, v4, v5, v8,
v10, v20, spare }
1: CE level 0
2: CE level 1
3
4
prach-StartingSubframe-r13[1]
maxNumPreambleAttemptCE-r13[1]
numRepetitionPerPreambleAttempt-r13[1]
mpdcch-NarrowbandsToMonitor-r13 SEQUENCE
(SIZE(1..2)) OF INTEGER (1..maxAvailNarrowBandsr13)[1] {
mpdcch-NarrowbandsToMonitor-r13[1]
See subclause 4.6.8
CEmodeA
FDD
TDD
CEmodeA
RF
SIG_FDD
OR
RRM_FDD
SIG_TDD
OR
RRM_TDD
53
prach-FreqOffset-r13[1]
Condition
Same as prachFrequencyOffset
sf2
n5
n1
1 entry
1
Value as specified in TS
36.523-3 clause 7.3.3.9
RF OR RRM
SIG
}
mpdcch-NumRepetition-RA-r13[1]
prach-HoppingConfig-r13[1]
}
PRACH-ParametersCE-r13[2] SEQUENCE {
prach-ConfigIndex-r13[2]
r1
off
3
4
53
prach-FreqOffset-r13[2]
prach-StartingSubframe-r13[2]
maxNumPreambleAttemptCE-r13[2]
numRepetitionPerPreambleAttempt-r13[2]
mpdcch-NarrowbandsToMonitor-r13 SEQUENCE
(SIZE(1..2)) OF INTEGER (1..maxAvailNarrowBandsr13)[2] {
mpdcch-NarrowbandsToMonitor-r13[1]
}
mpdcch-NumRepetition-RA-r13[2]
prach-HoppingConfig-r13[2]
RF
SIG_FDD
OR
RRM_FDD
SIG_TDD
OR
RRM_TDD
See subclause 4.6.8
sf128
n5
n128
1 entry
1
Value as specified in TS
36.523-3 clause 7.3.3.9
r4
off
}
}
ETSI
RF OR RRM
SIG
3GPP TS 36.508 version 15.5.0 Release 15
434
initial-CE-level-r13
ETSI TS 136 508 V15.5.0 (2019-07)
0
}
Condition
FDD
TDD
RF
RRM
RRM_FDD
RRM_TDD
SIG
SIG_FDD
SIG_TDD
CEmodeA
–
Explanation
FDD cell environment
TDD cell environment
Used for RF, performance and RRM testing
Used for RRM testing
Used for RRM testing in FDD cell environment
Used for RRM testing in TDD cell environment
Used for protocol testing
Used for protocol testing in FDD cell environment
Used for protocol testing in TDD cell environment
Used for CE mode A testing
PRACH-Config-v1430-DEFAULT
Table 4.6.3-7B: PRACH-Config-v1430-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PRACH-Config-v1430-DEFAULT ::= SEQUENCE {
rootSequenceIndexHighSpeed-r14
Value/remark
See clause 4.4.2, Table
4.4.2-1A and clause
6.3.2.2 Table 6.3.2.2-2
See clause 4.4.2, Table
4.4.2-1A and clause
6.3.2.2 Table 6.3.2.2-2
prach-ConfigIndexHighSpeed-r14
3
33
zeroCorrelationZoneConfigHighSpeed-r14
prach-FreqOffsetHighSpeed-r14
11 (Ncs configuration =
118)
11 (Ncs configuration =
118)
See subclause 4.6.8
Comment
See table 5.7.2-4
in TS 36.211for
PRACH format 03
See table 5.7.2-4
in TS 36.211 for
PRACH format 03
Typical value in
real network for
FDD (see table
5.7.1-1 and 5.7.12 in TS 36.211)
Typical value in
real network for
TDD (see table
5.7.1-3 and 5.7.14 in TS 36.211)
Restricted set
type B is used
Restricted set
type B is used
Channelbandwidthdependent
parameter
}
Condition
FDD
TDD
-
Explanation
FDD cell environment
TDD cell environment
PRACH-ConfigSIB-DEFAULT
Table 4.6.3-7a: PRACH-ConfigSIB-DEFAULT
Derivation Path: 36.508 clause 4.6.3 Table 4.6.3-7 PRACH-Config-DEFAULT
ETSI
Condition
FDD
TDD
FDD
TDD
FDD
TDD
3GPP TS 36.508 version 15.5.0 Release 15
-
435
ETSI TS 136 508 V15.5.0 (2019-07)
PRACH-ConfigSIB-v1310-DEFAULT
Table 4.6.3-7b: PRACH-ConfigSIB-v1310-DEFAULT
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.2
Information Element
PRACH-ConfigSIB-v1310-DEFAULT ::= SEQUENCE
{
rsrp-ThresholdsPrachInfoList-r13 SEQUENCE
(SIZE(1..3)) OF {
RSRP-Range[1]
}
rsrp-ThresholdsPrachInfoList-r13 SEQUENCE
(SIZE(1..3)) OF {
RSRP-Range[1]
RSRP-Range[2]
}
rsrp-ThresholdsPrachInfoList-r13 SEQUENCE
(SIZE(1..3)) OF {
RSRP-Range[1]
RSRP-Range[2]
RSRP-Range[3]
}
mpdcch-startSF-CSS-RA-r13 CHOICE {
fdd-r13
tdd-r13
}
prach-HoppingOffset-r13
prach-ParametersListCE-r13 SEQUENCE
(SIZE(1..maxCE-Level-r13)) OF SEQUENCE {
prach-ConfigIndex-r13[1]
436
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
1 entry
40
2 entries
42
34
3 entries
49
42
34
Comment
Threshold values
to determine the
CE level 1 for
PRACH.
RSRP-Range
values according
to mapping table
in TS 36.133
Table 9.1.14.3.31.
-101dBm
CEmodeA
PRACH_2C
E
Threshold values
to determine the
CE level 1, 2 and
3 for PRACH.
RSRP-Range
values according
to mapping table
in TS 36.133
Table 9.1.14.3.31.
-99 dBm
-107 dBm
CEmodeB
PRACH_3C
E
Threshold values
to determine the
CE level 1, 2 and
3 for PRACH.
RSRP-Range
values according
to mapping table
in TS 36.133
Table 9.1.14.3.31.
-92 dBm
-99 dBm
-107 dBm
CEmodeB
PRACH_4C
E
v1
v2
Not present
2 entries
FDD
TDD
1: CE level 0
2: CE level 1
3
4
53
prach-FreqOffset-r13[1]
prach-StartingSubframe-r13[1]
maxNumPreambleAttemptCE-r13[1]
numRepetitionPerPreambleAttempt-r13[1]
mpdcch-NarrowbandsToMonitor-r13 SEQUENCE
(SIZE(1..2)) OF INTEGER (1..maxAvailNarrowBandsr13)[1]
See subclause 4.6.8
sf2
n5
n1
1 entry
ETSI
Condition
Same as prachFrequencyOffset
CEmodeA
PRACH_2C
E
RF
SIG_FDD
OR
RRM_FDD
SIG_TDD
OR
RRM_TDD
3GPP TS 36.508 version 15.5.0 Release 15
mpdcch-NarrowbandsToMonitor-r13[1]
mpdcch-NumRepetition-RA-r13[1]
prach-HoppingConfig-r13[1]
prach-ConfigIndex-r13[2]
437
ETSI TS 136 508 V15.5.0 (2019-07)
1
Value as specified in TS
36.523-3 clause 7.3.3.9
r1
off
3
4
RF
SIG
RF
SIG_FDD
OR
RRM_FDD
SIG_TDD
OR
RRM_TDD
53
prach-FreqOffset-r13[2]
prach-StartingSubframe-r13[2]
maxNumPreambleAttemptCE-r13[2]
numRepetitionPerPreambleAttempt-r13[2]
mpdcch-NarrowbandsToMonitor-r13 SEQUENCE
(SIZE(1..2)) OF INTEGER (1..maxAvailNarrowBandsr13)[2]
mpdcch-NarrowbandsToMonitor-r13[1]
mpdcch-NumRepetition-RA-r13[2]
prach-HoppingConfig-r13[2]
}
prach-ParametersListCE-r13 SEQUENCE
(SIZE(1..maxCE-Level-r13)) OF SEQUENCE {
prach-ConfigIndex-r13[1]
See subclause 4.6.8
sf128
n5
n128
1 entry
1
Value as specified in TS
36.523-3 clause 7.3.3.9
r4
off
3 entries
3
4
53
prach-FreqOffset-r13[1]
prach-StartingSubframe-r13[1]
maxNumPreambleAttemptCE-r13[1]
numRepetitionPerPreambleAttempt-r13[1]
mpdcch-NarrowbandsToMonitor-r13 SEQUENCE
(SIZE(1..2)) OF INTEGER (1..maxAvailNarrowBandsr13)[1]
mpdcch-NarrowbandsToMonitor-r13[1]
mpdcch-NumRepetition-RA-r13[1]
prach-HoppingConfig-r13[1]
prach-ConfigIndex-r13[2]
mpdcch-NumRepetition-RA-r13[2]
prach-HoppingConfig-r13[2]
1: CE level 0
2: CE level 1
3: CE level 2
PRACH_3C
E
RF
SIG_FDD
OR
RRM_FDD
SIG_TDD
OR
RRM_TDD
See subclause 4.6.8
sf2
n5
n1
1 entry
1
Value as specified in TS
36.523-3 clause 7.3.3.9
r1
Off
3
4
53
prach-FreqOffset-r13[2]
prach-StartingSubframe-r13[2]
maxNumPreambleAttemptCE-r13[2]
numRepetitionPerPreambleAttempt-r13[2]
mpdcch-NarrowbandsToMonitor-r13 SEQUENCE
(SIZE(1..2)) OF INTEGER (1..maxAvailNarrowBandsr13)[2]
mpdcch-NarrowbandsToMonitor-r13[1]
RF
SIG
RF
SIG
RF
SIG_FDD
OR
RRM_FDD
SIG_TDD
OR
RRM_TDD
See subclause 4.6.8
Sf64
n5
n64
1 entry
1
Value as specified in TS
36.523-3 clause 7.3.3.9
r16
Off
ETSI
RF
SIG
3GPP TS 36.508 version 15.5.0 Release 15
prach-ConfigIndex-r13[3]
438
ETSI TS 136 508 V15.5.0 (2019-07)
3
4
RF
SIG_FDD
OR
RRM_FDD
SIG_TDD
OR
RRM_TDD
53
prach-FreqOffset-r13[3]
prach-StartingSubframe-r13[3]
maxNumPreambleAttemptCE-r13[3]
numRepetitionPerPreambleAttempt-r13[3]
mpdcch-NarrowbandsToMonitor-r13 SEQUENCE
(SIZE(1..2)) OF INTEGER (1..maxAvailNarrowBandsr13)[3]
mpdcch-NarrowbandsToMonitor-r13[1]
mpdcch-NumRepetition-RA-r13[3]
prach-HoppingConfig-r13[3]
}
prach-ParametersListCE-r13 SEQUENCE
(SIZE(1..maxCE-Level-r13)) OF SEQUENCE {
prach-ConfigIndex-r13[1]
See subclause 4.6.8
sf128
n5
n128
1 entry
1
Value as specified in TS
36.523-3 clause 7.3.3.9
r64
Off
4 entries
3
4
53
prach-FreqOffset-r13[1]
prach-StartingSubframe-r13[1]
maxNumPreambleAttemptCE-r13[1]
numRepetitionPerPreambleAttempt-r13[1]
mpdcch-NarrowbandsToMonitor-r13 SEQUENCE
(SIZE(1..2)) OF INTEGER (1..maxAvailNarrowBandsr13)[1]
mpdcch-NarrowbandsToMonitor-r13[1]
mpdcch-NumRepetition-RA-r13[1]
prach-HoppingConfig-r13[1]
prach-ConfigIndex-r13[2]
mpdcch-NumRepetition-RA-r13[2]
prach-HoppingConfig-r13[2]
prach-ConfigIndex-r13[3]
1: CE level 0
2: CE level 1
3: CE level 2
4: CE level 3
CEmodeB
PRACH_4C
E
RF
SIG_FDD
OR
RRM_FDD
SIG_TDD
OR
RRM_TDD
See subclause 4.6.8
sf2
n5
n1
1 entry
1
Value as specified in TS
36.523-3 clause 7.3.3.9
r1
Off
3
4
53
prach-FreqOffset-r13[2]
prach-StartingSubframe-r13[2]
maxNumPreambleAttemptCE-r13[2]
numRepetitionPerPreambleAttempt-r13[2]
mpdcch-NarrowbandsToMonitor-r13 SEQUENCE
(SIZE(1..2)) OF INTEGER (1..maxAvailNarrowBandsr13)[2]
mpdcch-NarrowbandsToMonitor-r13[1]
RF
SIG
RF
SIG
RF
SIG_FDD
OR
RRM_FDD
SIG_TDD
OR
RRM_TDD
See subclause 4.6.8
sf32
n5
n32
1 entry
1
Value as specified in TS
36.523-3 clause 7.3.3.9
r4
Off
3
4
ETSI
RF
SIG
RF
SIG_FDD
OR
RRM_FDD
3GPP TS 36.508 version 15.5.0 Release 15
prach-FreqOffset-r13[3]
prach-StartingSubframe-r13[3]
maxNumPreambleAttemptCE-r13[3]
numRepetitionPerPreambleAttempt-r13[3]
mpdcch-NarrowbandsToMonitor-r13 SEQUENCE
(SIZE(1..2)) OF INTEGER (1..maxAvailNarrowBandsr13)[3]
mpdcch-NarrowbandsToMonitor-r13[1]
mpdcch-NumRepetition-RA-r13[3]
prach-HoppingConfig-r13[3]
prach-ConfigIndex-r13[4]
439
ETSI TS 136 508 V15.5.0 (2019-07)
53
SIG_TDD
OR
RRM_TDD
See subclause 4.6.8
sf64
n5
n64
1 entry
1
Value as specified in TS
36.523-3 clause 7.3.3.9
r16
Off
3
4
53
prach-FreqOffset-r13[4]
prach-StartingSubframe-r13[4]
maxNumPreambleAttemptCE-r13[4]
numRepetitionPerPreambleAttempt-r13[4]
mpdcch-NarrowbandsToMonitor-r13 SEQUENCE
(SIZE(1..2)) OF INTEGER (1..maxAvailNarrowBandsr13)[4]
mpdcch-NarrowbandsToMonitor-r13[1]
mpdcch-NumRepetition-RA-r13[4]
prach-HoppingConfig-r13[4]
1
Value as specified in TS
36.523-3 clause 7.3.3.9
r64
Off
}
PRACH_3CE
PRACH_4CE
RF
SIG_FDD
OR
RRM_FDD
SIG_TDD
OR
RRM_TDD
See subclause 4.6.8
sf128
n5
n128
1 entry
}
Condition
FDD
TDD
RF
RRM
RRM_FDD
RRM_TDD
SIG
SIG_FDD
SIG_TDD
CEmodeA
CEmodeB
PRACH_2CE
RF
SIG
Explanation
FDD cell environment
TDD cell environment
Used for RF, performance and RRM testing
Used for RRM testing
Used for RRM testing in FDD cell environment
Used for RRM testing in TDD cell environment
Used for protocol testing
Used for protocol testing in FDD cell environment
Used for protocol testing in TDD cell environment
Used for CE mode A testing using 2 CE levels
Used for CE mode B testing using 4 CE levels
Used for RRM testing using reference PRACH Configurations PRACH_2CE in TS
36.521-3 clause A.9
Used for RRM testing using reference PRACH Configurations PRACH_3CE in TS
36.521-3 clause A.9
Used for RRM testing using reference PRACH Configurations PRACH_4CE in TS
36.521-3 clause A.9
ETSI
RF
SIG
3GPP TS 36.508 version 15.5.0 Release 15
–
440
ETSI TS 136 508 V15.5.0 (2019-07)
PUCCH-ConfigCommon-DEFAULT
Table 4.6.3-8: PUCCH-ConfigCommon-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUCCH-ConfigCommon-DEFAULT ::= SEQUENCE {
deltaPUCCH-Shift
Value/remark
ds2
nRB-CQI
See subclause 4.6.8
nCS-AN
n1PUCCH-AN
6
0
Comment
Condition
Assuming typical
values of the
maximum delay
spread
Channelbandwidthdependent
parameter
}
-
PUCCH-ConfigCommon-v1310-DEFAULT
Table 4.6.3-8A: PUCCH-ConfigCommon-v1310-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUCCH-ConfigCommon-v1310-DEFAULT ::=
SEQUENCE {
n1PUCCH-AN-InfoList-r13 SEQUENCE
(SIZE(1..maxCE-Level-r13)) OF INTEGER (0..2047)
n1PUCCH-AN-InfoList-r13[1]
n1PUCCH-AN-InfoList-r13[2]
n1PUCCH-AN-InfoList-r13 SEQUENCE
(SIZE(1..maxCE-Level-r13)) OF INTEGER (0..2047)
n1PUCCH-AN-InfoList-r13[1]
Value/remark
CEmodeA
2
2
4 entries
CEmodeB
0
0
n1PUCCH-AN-InfoList-r13[3]
0
n1PUCCH-AN-InfoList-r13[4]
0
INTEGER
(0..2047)
INTEGER
(0..2047)
INTEGER
(0..2047)
INTEGER
(0..2047)
n4
n4
n16
n16
CEmodeB
CEmodeB
}
Condition
CEmodeA
CEmodeB
Condition
2 entries
n1PUCCH-AN-InfoList-r13[2]
pucch-NumRepetitionCE-Msg4-Level0-r13
pucch-NumRepetitionCE-Msg4-Level1-r13
pucch-NumRepetitionCE-Msg4-Level2-r13
pucch-NumRepetitionCE-Msg4-Level3-r13
Comment
Explanation
Used for CE mode A testing
Used for CE mode B testing
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
441
ETSI TS 136 508 V15.5.0 (2019-07)
PUCCH-ConfigDedicated-DEFAULT
Table 4.6.3-9: PUCCH-ConfigDedicated-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUCCH-ConfigDedicated-DEFAULT ::= SEQUENCE
{
ackNackRepetition CHOICE {
release
}
tddAckNackFeedbackMode
Value/remark
Condition
NULL
Not present
multiplexing
}
Condition
FDD
TDD
Comment
Explanation
FDD cell environment
TDD cell environment
ETSI
Multiplexing is
selected as
default to align
with RAN4’s
assumptions in
RF tests.
FDD
TDD
3GPP TS 36.508 version 15.5.0 Release 15
–
442
ETSI TS 136 508 V15.5.0 (2019-07)
PUCCH-ConfigDedicated-v1020-DEFAULT
Table 4.6.3-9A: PUCCH-ConfigDedicated-v1020-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUCCH-ConfigDedicated-v1020 ::= SEQUENCE {
pucch-Format-r10 CHOICE {
channelSelection-r10 SEQUENCE {
n1PUCCH-AN-CS-r10 CHOICE {
setup SEQUENCE {
n1PUCCH-AN-CS-List-r10 SEQUENCE{
N1PUCCH-AN-CS-r10
}
n1PUCCH-AN-CS-List-r10 SEQUENCE{
N1PUCCH-AN-CS-r10
N1PUCCH-AN-CS-r10
Value/remark
Comment
Condition
Single SCC
1
4
101
102
103
104
FDD
2
2TX AND
FDD,
TDD
4
101
102
103
104
4
105
106
107
108
}
}
}
}
}
pucch-Format-r10 CHOICE {
format3-r10 SEQUENCE {
n3PUCCH-AN-List-r10 SEQUENCE {
2 SCCs or
more, TDD
FDD CA
4
101
102
103
104
}
twoAntennaPortActivatedPUCCH-Format3-r10
Not present
}
}
twoAntennaPortActivatedPUCCH-Format1a1b-r10
simultaneousPUCCH-PUSCH-r10
n1PUCCH-AN-RepP1-r10
Not present
Not present
Not present
}
Condition
Single SCC
2 SCCs or more
TDD FDD CA
Explanation
Addition or modification of single SCell
Addition or modification of SCells
CA cells configured with PCell on TDD band and SCell on FDD band
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
443
ETSI TS 136 508 V15.5.0 (2019-07)
PUCCH-ConfigDedicated-v1130-DEFAULT
Table 4.6.3-9AA: PUCCH-ConfigDedicated-v1130-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUCCH-ConfigDedicated-v1130-DEFAULT ::=
SEQUENCE {
n1PUCCH-AN-CS-v1130 CHOICE {
release
setup SEQUENCE {
n1PUCCH-AN-CS-ListP1-r11[1]
n1PUCCH-AN-CS-ListP1-r11[2]
}
}
nPUCCH-Param-r11 CHOICE {
release
setup SEQUENCE {
nPUCCH-Identity-r11
n1PUCCH-AN-r11
}
}
}
Value/remark
Comment
Condition
NULL
2 entries
FFS
FFS
NULL
FFS
FFS
– PUCCH-ConfigDedicated-v1250-DEFAULT
Table 4.6.3-9AB: PUCCH-ConfigDedicated-v1250-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUCCH-ConfigDedicated-v1250-DEFAULT ::=
SEQUENCE {
nkaPUCCH-Param-r12 CHOICE {
setup SEQUENCE {
nkaPUCCH-AN-r12
}
}
}
Value/remark
FFS
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
444
ETSI TS 136 508 V15.5.0 (2019-07)
– PUCCH-ConfigDedicated-r13-DEFAULT
Table 4.6.3-9AC: PUCCH-ConfigDedicated-r13-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUCCH-ConfigDedicated- r13-DEFAULT ::=
SEQUENCE {
ackNackRepetition-R13 CHOICE {
release
}
tddAckNackFeedbackMode
pucch-Format-r13 CHOICE {}
twoAntennaPortActivatedPUCCH-Format1a1b-r13
simultaneousPUCCH-PUSCH-r13
n1PUCCH-AN-RepP1-r13
nPUCCH-Param-r13 CHOICE {}
nkaPUCCH-Param-r13 CHOICE {}
spatialBundlingPUCCH
spatialBundlingPUSCH
harq-TimingTDD
codebooksizeDetermination-r13
maximumPayloadCoderate-r13
pucch-NumRepetitionCE-r13 CHOICE {}
pucch-NumRepetitionCE-r13 CHOICE {
setup CHOICE {
modeA SEQUENCE {
pucch-NumRepetitionCE-format1-r13
pucch-NumRepetitionCE-format2-r13
}
modeB SEQUENCE {
pucch-NumRepetitionCE-format1-r13
pucch-NumRepetitionCE-format2-r13
}
Value/remark
Condition
NULL
Not present
multiplexing
Multiplexing is
selected as default
to align with
RAN4’s
assumptions in RF
tests.
FDD
TDD
Not present
Not present
Not present
Not present
Not present
Not present
FALSE
FALSE
FALSE
Not present
0
Not present
CEmodeA,
CEmodeB
CEmodeA
r1
No repetitions
used for protocol
and performance
testing to reduce
the round trip time
for large signaling
messages.
r1
CEmodeB
r4
r4
}
}
}
Condition
CEmodeA
CEmodeB
Comment
Explanation
Used for CE mode A testing
Used for CE mode B testing
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
445
ETSI TS 136 508 V15.5.0 (2019-07)
PUSCH-ConfigCommon-DEFAULT
Table 4.6.3-10: PUSCH-ConfigCommon-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUSCH-ConfigCommon-DEFAULT ::= SEQUENCE {
pusch-ConfigBasic SEQUENCE {
n-SB
Value/remark
1
hoppingMode
interSubFrame
pusch-HoppingOffset
See subclause 4.6.8
enable64QAM
FALSE
TRUE
}
ul-ReferenceSignalsPUSCH SEQUENCE {
groupHoppingEnabled
TRUE
groupAssignmentPUSCH
0
sequenceHoppingEnabled
FALSE
cyclicShift
0
Comment
Condition
Typical
configuration in
real network
Typical
configuration in
real network
Channelbandwidthdependent
parameter
UL64QAM
In accordance
with “the RAN5
LTE UE Feature
list”.
Typical value in
real network
In accordance
with “the RAN5
LTE UE Feature
list”.
}
}
Condition
UL64QAM
–
Explanation
Used for UL 64QAM testing
PUSCH-ConfigCommon-v1310DEFAULT
Table 4.6.3-10A: PUSCH-ConfigCommon-v1310-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUSCH-ConfigCommon-v1310-DEFAULT ::=
SEQUENCE {
pusch-maxNumRepetitionCEmodeA-r13
Value/remark
Not present
pusch-maxNumRepetitionCEmodeB-r13
r192
pusch-HoppingOffset-v13xy
Not present
}
Condition
Explanation
ETSI
Comment
Default value (r8)
as defined in TS
36.213 [29, clause
8.0] apply
(minimum value
for CE Mode A)
Set to minimum
value for CE
Mode B
No PUSCH
frequency hopping
Condition
CEmodeA
CEmodeB
3GPP TS 36.508 version 15.5.0 Release 15
CEmodeA
CEmodeB
–
446
ETSI TS 136 508 V15.5.0 (2019-07)
Used for CE mode A testing
Used for CE mode B testing
PUSCH-ConfigDedicated-r13DEFAULT
Table 4.6.3-11: PUSCH-ConfigDedicated-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUSCH-ConfigDedicated-DEFAULT ::= SEQUENCE
{
betaOffset-ACK-Index
betaOffset-RI-Index
betaOffset-CQI-Index
}
Value/remark
Comment
Condition
9
6
6
Table 4.6.3-11A: Void
–
PUSCH-ConfigDedicated-v1130-DEFAULT
Table 4.6.3-11AA: PUSCH-ConfigDedicated-v1130-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUSCH-ConfigDedicated-v1130-DEFAULT ::=
SEQUENCE {
pusch-DMRS-r11 CHOICE {
release
setup SEQUENCE {
nPUSCH-Identity-r11
nDMRS-CSH-Identity-r11
}
}
}
–
Value/remark
Comment
Condition
NULL
FFS
FFS
PUSCH-ConfigDedicated-v1250-DEFAULT
Table 4.6.3-11AB: PUSCH-ConfigDedicated-v1250-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUSCH-ConfigDedicated-v1250-DEFAULT ::=
SEQUENCE {
UciOnPUSCH CHOICE {
setup SEQUENCE {
betaOffset-ACK-Index-SubframeSet2-r12
betaOffset-RI-Index-SubframeSet2-r12
betaOffset-CQI-Index-SubframeSet2-r12
betaOffsetMC-r12 SEQUENCE {
betaOffset-ACK-Index-MC-SubframeSet2-r12
betaOffset-RI-Index-MC-SubframeSet2-r12
betaOffset-CQI-Index-MC-SubframeSet2-r12
}
}
}
}
Value/remark
9
6
6
Not present
Not present
Not present
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
447
ETSI TS 136 508 V15.5.0 (2019-07)
PUSCH-ConfigDedicated--DEFAULT
Table 4.6.3-11AC: PUSCH-ConfigDedicated-r13-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUSCH-ConfigDedicated-r13-DEFAULT ::=
SEQUENCE {
betaOffset-ACK-Index-r13
betaOffset2-ACK-Index-r13
betaOffset-RI-Index-r13
betaOffset-CQI-Index-r13
betaOffsetMC-r13 SEQUENCE {}
groupHoppingDisabled-r13
dmrs-WithOCC-Activated-r13
pusch-DMRS-r11
uciOnPUSCH
pusch-HoppingConfig-r13
Value/remark
9
Not present
6
6
Not present
Not present
Not present
Not present
Not present
Not Present
Comment
Condition
No PUSCH
frequency hopping
for BL UEs and
UEs in CE
}
–
PUSCH-EnhancementsConfig-r14-DEFAULT
Table 4.6.3-11AD: PUSCH-EnhancementsConfig-r14-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
PUSCH-EnhancementsConfig-r14-DEFAULT ::=
CHOICE {
Release
Setup
Value/remark
Comment
NULL
PuschEnhanceme
nt_Release
PuschEnhanceme
nt _Setup
SEQUENCE {
pusch-HoppingOffsetPUSCH-Enh-r14
interval-ULHoppingPUSCH-Enh-r14 CHOICE{
interval-FDD-PUSCH-Enh-r14
interval-TDD-PUSCH-Enh-r14
}
1
int1
int1
}
}
Condition
Explanation
PuschEnhancement_Release UE is not allowed to apply PUSCH enhancement
PuschEnhancement _Setup
UE is allowed to apply PUSCH enhancement.
ETSI
Condition
FDD
TDD
3GPP TS 36.508 version 15.5.0 Release 15
–
448
ETSI TS 136 508 V15.5.0 (2019-07)
RACH-ConfigCommon-DEFAULT
Table 4.6.3-12: RACH-ConfigCommon-DEFAULT
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
449
Derivation Path: 36.331 clause 6.3.2
Information Element
RACH-ConfigCommon-DEFAULT ::= SEQUENCE {
preambleInfo SEQUENCE {
numberOfRA-Preambles
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
n52
preamblesGroupAConfig SEQUENCE {}
}
powerRampingParameters SEQUENCE {
powerRampingStep
preambleInitialReceivedTargetPower
dB2
dBm-104 (default)
}
ra-SupervisionInfo SEQUENCE {
preambleTransMax
n6
Condition
Assuming the
number of
dedicated
preambles is 12.
Not present
ra-ResponseWindowSize
sf10
mac-ContentionResolutionTimer
sf48
}
maxHARQ-Msg3Tx
4
preambleTransMax-CE-r13
preambleTransMax-CE-r13
Not present
n6
RACH-CE-LevelInfoList-r13
RACH-CE-LevelInfoList-r13 SEQUENCE (SIZE
(1..maxCE-Level-r13)) OF RACH-CE-LevelInfo-r13
Comment
Not present
2 entries
ETSI
Thermal noise = 113 dBm
NF = 5 dB
IoT = 6 dB
Required SNR = 8 dB (See table
8.4.2-1 in TS
36.104 [30])
-> -110 dB
(default value is
acceptable)
Under the
condition of Case
1 in RAN1
simulation
assumptions, an
UE with pathloss
of CDF = 90%
reaches the
maximum transmit
power in 4
successive
retransmissions.
6 has been
selected
considering the
margin of 2.
The maximum
value is
preferable.
Allows for a
sufficient number
of msg3
retransmissions.
Under the
condition of Target
SIR = 2 dB, the
probability of 2
transmissions is
less than 1%. 4
has been selected
considering the
margin of 2.
Same as
preambleTransMa
x
CEmodeA or
CEmodeB
first two 2 entries
[1] and [2] of list to
be used
CEmodeA
3GPP TS 36.508 version 15.5.0 Release 15
450
RACH-CE-LevelInfoList-r13 SEQUENCE (SIZE
(1..maxCE-Level-r13)) OF RACH-CE-LevelInfo-r13
RACH-CE-LevelInfo-r13[1] SEQUENCE {
preambleMappingInfo-r13 SEQUENCE {
firstPreamble-r13
lastPreamble-r13
}
ra-ResponseWindowSize-r13
mac-ContentionResolutionTimer-r13
ETSI TS 136 508 V15.5.0 (2019-07)
4 entries
CEmodeB
0
14
sf20
sf80
rar-HoppingConfig-r13
}
RACH-CE-LevelInfo-r13[2] SEQUENCE {
preambleMappingInfo-r13 SEQUENCE {
firstPreamble-r13
lastPreamble-r13
}
ra-ResponseWindowSize-r13
mac-ContentionResolutionTimer-r13
rar-HoppingConfig-r13
}
RACH-CE-LevelInfo-r13[3] SEQUENCE {
PreambleMappingInfo-r13[3] SEQUENCE {
firstPreamble-r13
lastPreamble-r13
}
ra-ResponseWindowSize-r13
mac-ContentionResolutionTimer-r13
rar-HoppingConfig-r13
}
RACH-CE-LevelInfo-r13[4] SEQUENCE {
preambleMappingInfo-r13 SEQUENCE {
firstPreamble-r13
lastPreamble-r13
}
ra-ResponseWindowSize-r13
mac-ContentionResolutionTimer-r13
rar-HoppingConfig-r13
}
Allows for a
sufficient number
of msg3
retransmissions.
Longer time for
increasing CE
levels.
off
15
29
sf80
sf120
off
30
44
sf180
sf200
off
45
60
sf320
sf480
off
}
}
Condition
CEmodeA
CEmodeB
–
Explanation
Used for CE mode A testing
Used for CE mode B testing
Rach-ConfigDedicated-DEFAULT
Table 4.6.3-12A: Rach-ConfigDedicated-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
Rach-ConfigDedicated-DEFAULT ::= SEQUENCE {
ra-PreambleIndex
ra-PRACH-MaskIndex
}
Value/remark
52
0
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
451
ETSI TS 136 508 V15.5.0 (2019-07)
RadioResourceConfigCommon-DEFAULT
Table 4.6.3-13: RadioResourceConfigCommon-DEFAULT
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigCommon-DEFAULT ::=
SEQUENCE {
rach-ConfigCommon
prach-Config
pdsch-ConfigCommon
pusch-ConfigCommon
phich-Config
452
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
RACH-ConfigCommonDEFAULT
PRACH-ConfigDEFAULT
Not present
PDSCH-ConfigCommonDEFAULT
PUSCH-ConfigCommonDEFAULT
Not present
PHICH-Config-DEFAULT
pucch-ConfigCommon
Not present
PUCCH-ConfigCommonDEFAULT
soundingRSUL-ConfigCommon
SoundingRS-ULConfigCommonDEFAULT
Not present
UplinkPowerControlCom
mon-DEFAULT
uplinkPowerControlCommon
antennaInfoCommon
antennaInfoCommon SEQUENCE {
antennaPortsCount
}
antennaInfoCommon SEQUENCE {
antennaPortsCount
}
antennaInfoCommon SEQUENCE {
Not present
antennaPortsCount
}
p-Max
tdd-Config
an1
ul-CyclicPrefixLength
uplinkPowerControlCommon-v1020
tdd-Config-v1130
pusch-ConfigCommon-v1270
prach-Config-v1310
freqHoppingParameters-r13
pdsch-ConfigCommon-v1310
pucch-ConfigCommon-v1310
Comment
Condition
FullConfig,
HO-toEUTRA
FullConfig,
HO-toEUTRA
SAME-BW
DIFF-BW,
FullConfig,
HO-toEUTRA
FullConfig,
HO-toEUTRA
2TX
an2
4TX
an4
FullConfig,
HO-toEUTRA
Not present
Not present
TDD-Config-DEFAULT
len1
UplinkPowerControlCom
mon-v1020-DEFAULT
Not present
Not present
Not present
Not present
PRACH-Config-v1310DEFAULT
Not present
FreqHoppingParametersr13-DEFAULT
Not present
PDSCH-ConfigCommonv1310-DEFAULT
Not present
PUCCH-ConfigCommonv1310-DEFAULT
ETSI
FDD or LAA
SCell
TDD
CA
CEmodeA,
CEmodeB
(CEmodeA
OR
CEmodeB)
AND SIG
CEmodeA,
CEmodeB
CEmodeA,
CEmodeB
3GPP TS 36.508 version 15.5.0 Release 15
pusch-ConfigCommon-v1310
uplinkPowerControlCommon-v1310
highSpeedConfig-r14
prach-Config-v1430
453
ETSI TS 136 508 V15.5.0 (2019-07)
Not present
PUSCH-ConfigCommonv1310-DEFAULT
Not present
Not present
HighSpeedConfig-r14DEFAULT
Not present
PRACH-Config-v1430DEFAULT
}
Condition
FDD
TDD
2TX
4TX
SAME-BW
DIFF-BW
UL CA
FullConfig
HO-to-EUTRA
CA
CEmodeA
CEmodeB
LAA SCell
SIG
HighSpeedEnhance
Explanation
FDD cell environment
TDD cell environment
Used for cells with two antenna ports
Used for cells with four antenna ports
Source and target cell are configured with same bandwidth
Source and target cell are configured with different bandwidth
When UL Carrier Aggregation is used.
Handover with full configuration option (Rel-9 or later)
Inter-RAT handover to E-UTRA
For Carrier Aggregation Test cases
Used for CE mode A testing
Used for CE mode B testing
For LAA SCell environment
For Signalling test cases
High speed test environment
ETSI
CEmodeA,
CEmodeB
HighSpeedE
nhance
HighSpeedE
nhance
3GPP TS 36.508 version 15.5.0 Release 15
–
454
ETSI TS 136 508 V15.5.0 (2019-07)
RadioResourceConfigCommonSCell-r10-DEFAULT
Table 4.6.3-13A: RadioResourceConfigCommonSCell-r10-DEFAULT
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigCommonSCell-r10-DEFAULT
::= SEQUENCE {
nonUL-Configuration-r10 SEQUENCE {
dl-Bandwidth-r10
antennaInfoCommon-r10 SEQUENCE {
antennaPortsCount
antennaPortsCount
antennaPortsCount
455
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
Condition
Same downlink
bandwidth as used for
target SCell
an1
an2
an4
1TX
2TX
4TX
Not present
PHICH-Config-DEFAULT
PDSCH-ConfigCommonDEFAULT
Not present
TDD-Config-DEFAULT
FDD
TDD
}
mbsfn-SubframeConfigList-r10
phich-Config-r10
pdsch-ConfigCommon-r10
tdd-Config-r10
}
ul-Configuration-r10
ul-Configuration-r10 SEQUENCE {
ul-FreqInfo-r10 SEQUENCE {
ul-CarrierFreq-r10
ul-Bandwidth-r10
additionalSpectrumEmissionSCell-r10
}
p-Max-r10
uplinkPowerControlCommonSCell-r10
soundingRS-UL-ConfigCommon-r10
ul-CyclicPrefixLength-r10
prach-ConfigSCell-r10
pusch-ConfigCommon-r10
}
pusch-ConfigCommon-v1270
pusch-ConfigCommon-v1270 SEQUENCE {
enable64QAM-v1270
}
pucch-ConfigCommon-r13
uplinkPowerControlCommonSCell-v1310
Not present
UL CA
Not present
Not present
1 (CA_NS_01)
Not present
UplinkPowerControlCom
monSCell-r10-DEFAULT
SoundingRS-ULConfigCommonDEFAULT
len1
Not present
FFS
PUSCH-ConfigCommonDEFAULT
Not present
UL64QAM
true
Not present
PUCCH-ConfigCommonDEFAULT
Not present
UplinkPowerControlCom
monSCell-v1310
ul-Configuration-r14 SEQUENCE {
ul-FreqInfo-r14 SEQUENCE {
ul-CarrierFreq-r14
ul-Bandwidth-r14
additionalSpectrumEmissionSCell-r14
}
p-Max-r14
soundingRS-UL-ConfigCommon-r14
ul-CyclicPrefixLength-r14
prach-ConfigSCell-r14
uplinkPowerControlCommonPUSCH-LessCellv14xy SEQUENCE {
FDD
TDD
Not present
Not present
1 (CA_NS_01)
Not present
SoundingRS-ULConfigCommonDEFAULT
len1
Not Present
ETSI
PUCCH
SCell
PUCCH
SCell
SRSSwitching
3GPP TS 36.508 version 15.5.0 Release 15
456
p0-Nominal-PeriodicSRS-r14
-85
p0-Nominal-AperiodicSRS-r14
-85
alpha-SRS-r14
}
harq-ReferenceConfig-r14
soundingRS-FlexibleTiming-r14
al08
}
highSpeedConfigSCell-r14
prach-Config-v1430
ETSI TS 136 508 V15.5.0 (2019-07)
Same as default
PUSCH p0Norminal
Same as default
PUSCH p0Norminal
Not Present
Not Present
Not Present
HighSpeedConfigSCellr14-DEFAULT
Not present
PRACH-Config-v1430DEFAULT
}
Condition
FDD
TDD
UL CA
1TX
2TX
4TX
SRS-Switching
HighSpeedEnhance
PUCCH-SCell
Explanation
FDD cell environment
TDD cell environment
When UL Carrier Aggregation is used.
Used for SCell with one antenna port
Used for SCell with two antenna ports
Used for SCell with four antenna ports
SRS transmission is switched to a PUSCH-less TDD SCell.
High speed test environment
When this SCell is configured as PUCCH SCell
UL64QAM
Used for UL 64QAM testing for SCell
ETSI
HighSpeed
Enhance
HighSpeed
Enhance
3GPP TS 36.508 version 15.5.0 Release 15
–
457
ETSI TS 136 508 V15.5.0 (2019-07)
RadioResourceConfigCommonSIB-DEFAULT
Table 4.6.3-14: RadioResourceConfigCommonSIB-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigCommonSIB-DEFAULT ::=
SEQUENCE {
rach-ConfigCommon
bcch-Config
pcch-Config
prach-Config
pdsch-ConfigCommon
pusch-ConfigCommon
pucch-ConfigCommon
soundingRS-UL-ConfigCommon
uplinkPowerControlCommon
ul-CyclicPrefixLength
uplinkPowerControlCommon-v1020
rach-ConfigCommon-v1250
pusch-ConfigCommon-v1270
pusch-ConfigCommon-v1270 SEQUENCE {
enable64QAM-v1270
}
bcch-Config-v1310
pcch-Config-v1310
freqHoppingParameters-r13
pdsch-ConfigCommon-v1310
pusch-ConfigCommon-v1310
prach-ConfigCommon-v1310
pucch-ConfigCommon-v1310
highSpeedConfig-r14
prach-Config-v1430
Value/remark
RACH-ConfigCommonDEFAULT
BCCH-Config-DEFAULT
PCCH-Config-DEFAULT
PRACH-ConfigSIBDEFAULT
PDSCH-ConfigCommonDEFAULT
PUSCH-ConfigCommonDEFAULT
PUCCH-ConfigCommonDEFAULT
SoundingRS-ULConfigCommonDEFAULT
UplinkPowerControlCom
mon-DEFAULT
len1
Not present
UplinkPowerControlCom
mon-v1020-DEFAULT
Not present
Not present
Comment
Condition
CA
UL64QAM
true
Not present
Not present
PCCH-Config-v1310DEFAULT
Not Present
FreqHoppingParametersr13-DEFAULT
Not present
PDSCH-ConfigCommonv1310-DEFAULT
Not present
PUSCH-ConfigCommonv1310-DEFAULT
Not present
PRACH-ConfigSIBv1310-DEFAULT
Not present
PUCCH-ConfigCommonv1310-DEFAULT
Not present
HighSpeedConfig-r14DEFAULT
Not present
PRACH-Config-v1430DEFAULT
}
Condition
Explanation
ETSI
CEmodeA,
CEmodeB
CEmodeA,
CEmodeB
CEmodeA,
CEmodeB
CEmodeA,
CEmodeB
CEmodeA,
CEmodeB
CEmodeA,
CEmodeB
HighSpeedE
nhance
HighSpeedE
nhance
3GPP TS 36.508 version 15.5.0 Release 15
CA
CEmodeA
CEmodeB
HighSpeedEnhance
UL64QAM
–
458
ETSI TS 136 508 V15.5.0 (2019-07)
For Carrier Aggregation test cases
Used for CE mode A testing
Used for CE mode B testing
High speed test environment
Used for UL 64QAM testing
RadioResourceConfigDedicated-SRB1
Table 4.6.3-15: RadioResourceConfigDedicated-SRB1
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-SRB1 ::=
SEQUENCE {
srb-ToAddModList SEQUENCE (SIZE (1..2)) OF
SEQUENCE {}
drb-ToAddModList
drb-ToReleaseList
mac-MainConfig CHOICE {
explicitValue
}
sps-Config
physicalConfigDedicated
Value/remark
Comment
1 entry, with value SRBToAddMod-DEFAULT
using condition SRB1
Not present
Not present
MAC-MainConfig-SRB
Not present
PhysicalConfigDedicated
-DEFAULT using
condition SRB1
}
ETSI
See subclause
4.8.2
For signalling test
cases see
subclause
6.6B.1.1.1.
Otherwise, see
subclause 4.8.2
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
459
ETSI TS 136 508 V15.5.0 (2019-07)
RadioResourceConfigDedicated-SRB2-DRB(n,m)
Table 4.6.3-16: RadioResourceConfigDedicated-SRB2-DRB(n,m)
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-SRB2-DRB(n, m) ::=
SEQUENCE {
srb-ToAddModList SEQUENCE (SIZE (1..2)) OF
SEQUENCE {
srb-ToAddMod[1]
}
drb-ToAddModList SEQUENCE (SIZE (1..maxDRB))
OF SEQUENCE {
drb-ToAddMod[k, k=1..n]
drb-ToAddMod[k, k=n+1..n+m]
}
drb-ToReleaseList
mac-MainConfig CHOICE {
explicitValue
}
sps-Config
physicalConfigDedicated
Value/remark
Comment
n is the number of
AM RLC DRBs
(1..N)
m is the number
of UM RLC DRBs
(0..M)
Condition
1 entry
SRB-ToAddModDEFAULT using
condition SRB2
See subclause
4.8.2
n+m entries
DRB-ToAddModDEFAULT (k) using
condition AM
DRB-ToAddModDEFAULT (k) using
condition UM
n AM RLC DRBs
See subclause
4.8.2
m UM RLC DRBs
See subclause
4.8.2
m>0
Not present
MAC-MainConfig-RBC
using condition DRX_L
(note)
MAC-MainConfig-RBC
using condition DRX_S
(note)
Not present
PhysicalConfigDedicated
-DEFAULT using
condition RBC
See subclause
4.8.2
m=0
See subclause
4.8.2
m>0
For signalling test
cases see
subclause
6.6B.1.1.1.
Otherwise, see
subclause 4.8.2
}
NOTE: In cases where no RLC-UM bearer is configured, large DRX Cycle length is used. In cases where at least one
RLC-UM bearer is configured, small DRX Cycle length is used.
Condition
m=0
m>0
Explanation
m is equal to zero
m is greater than zero
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
460
ETSI TS 136 508 V15.5.0 (2019-07)
RadioResourceConfigDedicated-DRB(n,m)
Table 4.6.3-17: RadioResourceConfigDedicated-DRB(n,m)
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-DRB(n, m) ::=
SEQUENCE {
srb-ToAddModList
drb-ToAddModList SEQUENCE (SIZE (1..maxDRB))
OF SEQUENCE {
drb-ToAddMod[k, k=BID+1..BID+n]
drb-ToAddMod[k, k= BID+1+n.. BID+n+m]
}
drb-ToReleaseList
mac-MainConfig
mac-MainConfig CHOICE {
explicitValue
}
sps-Config
physicalConfigDedicated
}
NOTE:
Value/remark
Not present
n+m entries
DRB-ToAddModDEFAULT (k) using
condition AM
DRB-ToAddModDEFAULT (k) using
condition UM
–
BID is the total
number of
established DRBs
in the UE, before
applying the
contents of this IE
n AM RLC DRBs
See subclause
4.8.2
m UM RLC DRBs
See subclause
4.8.2
Not present
Not present (note)
MAC-MainConfig-RBC
using condition DRX_S
(note)
Condition
n>0
m>0
m=0
m>0
See subclause
4.8.2
Not present
Not present
In cases where no RLC-UM bearer is added, existing DRX configuration is used without modification. In
cases where at least one RLC-UM bearer is added, small DRX Cycle length is used.
Condition
n>0
m=0
m>0
Comment
n is the number of
AM RLC DRBs
(0..N)
m is the number
of UM RLC DRBs
(0..M)
Explanation
n is greater than zero
m is equal to zero
m is greater than zero
RadioResourceConfigDedicated-SRB4
Table 4.6.3-17A: RadioResourceConfigDedicated-SRB4
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-SRB4 ::=
SEQUENCE {
srb-ToAddModExtList-r15 SEQUENCE (SIZE (1))
OF SEQUENCE {
srb-ToAddMod
Value/remark
Comment
1 entry
SRB4-ToAddModDEFAULT
}
}
ETSI
See subclause
4.8.2
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
461
ETSI TS 136 508 V15.5.0 (2019-07)
RadioResourceConfigDedicated-HO-TO-EUTRA(n,m)
Table 4.6.3-18: RadioResourceConfigDedicated-HO-TO-EUTRA(n,m)
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-HO-TO-EUTRA(n,
m) ::= SEQUENCE {
srb-ToAddModList SEQUENCE (SIZE (1..2)) OF
SEQUENCE {
srb-ToAddMod[1]
srb-ToAddMod[2]
}
drb-ToAddModList SEQUENCE (SIZE (1..maxDRB))
OF SEQUENCE {
drb-ToAddMod[k, k=1..n]
drb-ToAddMod[k, k=n+1..n+m]
}
drb-ToReleaseList
mac-MainConfig CHOICE {
explicitValue
}
sps-Config
physicalConfigDedicated
Value/remark
Comment
n is the number of
AM RLC DRBs
(1..N)
m is the number
of UM RLC DRBs
(0..M)
Condition
2 entries
SRB-ToAddModDEFAULT using
condition SRB1
SRB-ToAddModDEFAULT using
condition SRB2
See subclause
4.8.2
See subclause
4.8.2
n+m entries
DRB-ToAddModDEFAULT (k) using
condition AM
DRB-ToAddModDEFAULT (k) using
condition UM
n AM RLC DRBs
See subclause
4.8.2
m UM RLC DRBs
See subclause
4.8.2
m>0
Not present
MAC-MainConfig-RBC
using condition DRX_L
(note)
MAC-MainConfig-RBC
using condition DRX_S
(note)
Not present
PhysicalConfigDedicated
-DEFAULT using
condition RBC
See subclause
4.8.2
m=0
See subclause
4.8.2
m>0
For signalling test
cases see
subclause
6.6B.1.1.1.
Otherwise, see
subclause 4.8.2
}
NOTE: In cases where no RLC-UM bearer is configured, large DRX Cycle length is used. In cases where at least one
RLC-UM bearer is configured, small DRX Cycle length is used.
Condition
m=0
m>0
Explanation
m is equal to zero
m is greater than zero
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
462
ETSI TS 136 508 V15.5.0 (2019-07)
RadioResourceConfigDedicated-AM-DRB-ADD(bid)
Table 4.6.3-18A: RadioResourceConfigDedicated-AM-DRB-ADD(bid)
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-AM-DRB-ADD(bid)
::= SEQUENCE {
srb-ToAddModList
drb-ToAddModList SEQUENCE (SIZE (1..maxDRB))
OF SEQUENCE {
drb-ToAddMod[1]
}
drb-ToReleaseList
mac-MainConfig
sps-Config
physicalConfigDedicated
Value/remark
Comment
bid is the bearer
identity
Condition
Not present
one entry
DRB-ToAddModDEFAULT (bid) using
condition AM
See subclause
4.8.2
Not present
Not present
Not present
Not present
}
-
RadioResourceConfigDedicated-UM-DRB-ADD(bid)
Table 4.6.3-18B: RadioResourceConfigDedicated-UM-DRB-ADD(bid)
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-UM-DRB-ADD(bid)
::= SEQUENCE {
srb-ToAddModList
drb-ToAddModList SEQUENCE (SIZE (1..maxDRB))
OF SEQUENCE {
drb-ToAddMod[1]
}
drb-ToReleaseList
mac-MainConfig CHOICE {
explicitValue
}
sps-Config
physicalConfigDedicated
Value/remark
Comment
bid is the bearer
identity
Not present
one entry
DRB-ToAddModDEFAULT (bid) using
condition UM
See subclause
4.8.2
Not present
MAC-MainConfig-RBC
using condition DRX_S
(note)
Not present
Not present
}
NOTE: Since one RLC-UM bearer is added, small DRX Cycle length is used.
ETSI
See subclause
4.8.2
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
463
ETSI TS 136 508 V15.5.0 (2019-07)
RadioResourceConfigDedicated- DRB-REL(bid)
Table 4.6.3-18C: RadioResourceConfigDedicated-DRB-REL(bid)
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-DRB-REL(bid) ::=
SEQUENCE {
srb-ToAddModList
drb-ToAddModList
drb-ToReleaseList SEQUENCE (SIZE (1..maxDRB))
OF
drb-Identity[1]
mac-MainConfig
sps-Config
physicalConfigDedicated
}
–
Value/remark
Comment
bid is the bearer
identity
Condition
Not present
Not present
one entry
bid
Not present
Not present
Not present
RadioResourceConfigDedicated-HO
Table 4.6.3-19: RadioResourceConfigDedicated-HO
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-HO ::= SEQUENCE
{
srb-ToAddModList
drb-ToAddModList
drb-ToReleaseList
mac-MainConfig
sps-Config
physicalConfigDedicated
Value/remark
Not present
Not present
Not present
Not present
Not present
PhysicalConfigDedicatedDEFAULT using
condition RBC-HO
Comment
Condition
For signalling test
cases see
subclause
6.6B.1.1.1.
Otherwise, see
subclause 4.8.2
}
–
RadioResourceConfigDedicatedSCell-r10-DEFAULT
Table 4.6.3-19AA: RadioResourceConfigDedicatedSCell-r10-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicatedSCell-r10 ::=
SEQUENCE {
physicalConfigDedicatedSCell-r10
Value/remark
PhysicalConfigDedicated
SCell-r10-DEFAULT
}
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
464
ETSI TS 136 508 V15.5.0 (2019-07)
RadioResourceConfigDedicated-SCell_AddMod
Table 4.6.3-19AAA: RadioResourceConfigDedicated-SCell_AddMod
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-SCell_AddMod ::=
SEQUENCE {
srb-ToAddModList
drb-ToAddModList
drb-ToReleaseList
mac-MainConfig
sps-Config
physicalConfigDedicated
Value/remark
Not present
Not present
Not present
MAC-MainConfig-RBC
using condition
SCell_AddMod
Not present
PhysicalConfigDedicatedDEFAULT using
condition SCell_AddMod
Comment
Condition
See subclause
4.8.2
For signalling test
cases see
subclause
6.6B.1.1.1.
Otherwise, see
subclause 4.8.2
}
Table 4.6.3-19AAAA: Void
–
RadioResourceConfigDedicated-V2X
Table 4.6.3-19AAAAA: RadioResourceConfigDedicated-V2X-SPS
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-V2X-SPS::=
SEQUENCE {
sps-Config-v1430 SEQUENCE {
ul-SPS-V-RNTI-r14
sl-SPS-V-RNTI-r14
sps-ConfigUL-ToAddModList-r14
sps-ConfigUL-ToReleaseList-r14
sps-ConfigSL-ToAddModList-r14 SEQUENCE
(SIZE (1..maxConfigSPS-r14)) OF SEQUENCE {
sps-ConfigIndex-r14
semiPersistSchedIntervalSL-r14
}
sps-ConfigSL-ToReleaseList-r14 SEQUENCE
(SIZE (1..maxConfigSPS-r14)) OF SEQUENCE {
SPS-ConfigIndex-r14
}
}
}
Condition
SL_ADD
SL_RELEASE
Value/remark
Comment
Condition
Not Present
'1034'H
Not Present
Not Present
SL_ADD
1
sf20
INTEGER
(1..maxConfigSPSr14)
ENUMERATED {
sf20 }
SL_RELEAS
E
1
Explanation
Add SPS configuration for V2X communication over Sidelink
Release SPS configuration for V2X communication over Sidelink
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
465
ETSI TS 136 508 V15.5.0 (2019-07)
RadioResourceConfigDedicated-EN-DC-Split
Table 4.6.3-19AAAAAB: RadioResourceConfigDedicated-EN-DC-Split
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-EN-DC-Split ::=
SEQUENCE {
srb-ToAddModList SEQUENCE (SIZE (1..2)) OF
SEQUENCE {
srb-ToAddMod[1]
}
drb-ToAddModList SEQUENCE (SIZE (1..maxDRB))
OF SEQUENCE {
drb-ToAddMod[1]
drb-ToAddMod[2]
}
drb-ToAddModList SEQUENCE (SIZE (1..maxDRB))
OF SEQUENCE {
drb-ToAddMod[1]
drb-ToAddMod[2]
drb-ToAddMod[3]
}
drb-ToReleaseList
mac-MainConfig CHOICE {
explicitValue
}
sps-Config
physicalConfigDedicated
Value/remark
Comment
Condition
1 entry
SRB-ToAddModDEFAULT using
condition SRB2
See subclause
4.8.2
2 entries
DRB-ToAddModDEFAULT (8) using
condition AM
DRB-ToAddMod-EN-DCSplit
See subclause
4.8.2
See subclause
4.8.2
3 entries
DRB-ToAddModDEFAULT (1) using
condition AM
DRB-ToAddModDEFAULT (8) using
condition AM
DRB-ToAddMod-EN-DCSplit
MULTI_PDN
See subclause
4.8.2
See subclause
4.8.2
See subclause
4.8.2
Not present
MAC-MainConfig-RBC
using condition DRX_L
Not present
PhysicalConfigDedicated
-DEFAULT using
condition RBC
}
ETSI
See subclause
4.8.2
For signalling test
cases see
subclause
6.6B.1.1.1.
Otherwise, see
subclause 4.8.2
3GPP TS 36.508 version 15.5.0 Release 15
-
466
ETSI TS 136 508 V15.5.0 (2019-07)
RadioResourceConfigDedicated-EN-DC_Split_DRB_Rel(bid)
Table 4.6.3-19AAAAAC: RadioResourceConfigDedicated-DRB-REL(bid)
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-ENDC_Split_DRB_Rel(bid) ::= SEQUENCE {
srb-ToAddModList
drb-ToAddModList
drb-ToReleaseList SEQUENCE (SIZE (1..maxDRB))
OF
drb-Identity[1]
mac-MainConfig
sps-Config
physicalConfigDedicated
}
–
Value/remark
Comment
bid is the bearer
identity of EN-DC
Split DRB
Condition
Not present
Not present
one entry
bid
Not present
Not present
Not present
RadioResourceConfigDedicated-EN-DC-SRB2-DRB
Table 4.6.3-19AAAAAD: RadioResourceConfigDedicated-EN-DC-SRB2-DRB
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-SRB2-DRB ::=
SEQUENCE {
srb-ToAddModList SEQUENCE (SIZE (1..2)) OF
SEQUENCE {
srb-ToAddMod[1]
}
drb-ToAddModList SEQUENCE (SIZE (1..maxDRB))
OF SEQUENCE {
drb-ToAddMod[1]
}
drb-ToAddModList SEQUENCE (SIZE (1..maxDRB))
OF SEQUENCE {
drb-ToAddMod[1]
drb-ToAddMod[2]
}
drb-ToReleaseList
mac-MainConfig CHOICE {
explicitValue
}
sps-Config
physicalConfigDedicated
Value/remark
Comment
Condition
1 entry
SRB-ToAddModDEFAULT using
condition SRB2
See subclause
4.8.2
1 entry
DRB-ToAddModDEFAULT (8) using
condition AM
See subclause
4.8.2
MULTI_PDN
2 entries
DRB-ToAddModDEFAULT (1) using
condition AM
DRB-ToAddModDEFAULT (8) using
condition AM
See subclause
4.8.2
See subclause
4.8.2
Not present
MAC-MainConfig-RBC
using condition DRX_L
Not present
PhysicalConfigDedicated
-DEFAULT using
condition RBC
}
ETSI
See subclause
4.8.2
For signalling test
cases see
subclause
6.6B.1.1.1.
Otherwise, see
subclause 4.8.2
3GPP TS 36.508 version 15.5.0 Release 15
–
467
ETSI TS 136 508 V15.5.0 (2019-07)
RLC-Config-DRB-AM-RECONFIG
Table 4.6.3-19A: RLC-Config-DRB-AM-RECONFIG
Derivation Path: 36.508 table 4.8.2.1.3.2-1: RLC-Config-DRB-AM
Information Element
Value/remark
RLC-Config-DRB-AM-RECONFIG ::= CHOICE {
am SEQUENCE {
ul-AM-RLC SEQUENCE {
t-PollRetransmit
ms85
pollPDU
p64
pollByte
kB250
maxRetxThreshold
t8
}
dl-AM-RLC SEQUENCE {
t-Reordering
ms85
t-StatusProhibit
ms50
}
}
}
–
Comment
Condition
Comment
Condition
Comment
Condition
RLC-Config-DRB-UM-RECONFIG
Table 4.6.3-19B: RLC-Config-DRB-UM-RECONFIG
Derivation Path: 36.508 table 4.8.2.1.3.1-1: RLC-Config-DRB-UM
Information Element
Value/remark
RLC-Config-DRB-UM-RECONFIG ::= CHOICE {
um-Bi-Directional SEQUENCE {
ul-UM-RLC SEQUENCE {
sn-FieldLength
Size10
}
dl-UM-RLC SEQUENCE {
sn-FieldLength
Size10
t-Reordering
ms55
}
}
}
–
RLC-Config-SRB-AM-RECONFIG
Table 4.6.3-19C: RLC-Config-SRB-AM-RECONFIG
Derivation Path: 36.331 clause 6.3.2, 9.2.1
Information Element
RLC-Config-SRB-AM-RECONFIG ::= CHOICE {
am SEQUENCE {
ul-AM-RLC SEQUENCE {
t-PollRetransmit
pollPDU
pollByte
maxRetxThreshold
}
dl-AM-RLC SEQUENCE {
t-Reordering
t –StatusProhibit
}
}
}
Value/remark
ms50
pInfinity
kBinfinity
t6
ms40
ms0
ETSI
Default
Default
Default
3GPP TS 36.508 version 15.5.0 Release 15
–
468
ETSI TS 136 508 V15.5.0 (2019-07)
SCellToAddMod-r10-DEFAULT
Table 4.6.3-19D: SCellToAddMod-r10-DEFAULT
Derivation Path: 36.331 clause 6.2.2
Information Element
SCellToAddMod-r10 ::= SEQUENCE {
sCellIndex-r10
cellIdentification-r10 SEQUENCE {
physCellId-r10
dl-CarrierFreq-r10
dl-CarrierFreq-r10
}
radioResourceConfigCommonSCell-r10
radioResourceConfigDedicatedSCell-r10
dl-CarrierFreq-v1090
antennaInfoDedicatedSCell-v10i0 ::= SEQUENCE {
maxLayersMIMO-r10
}
srs-SwitchFromServCellIndex-r14
Value/remark
Comment
Condition
Set according to specific
message content
Set according to specific
message content
Set according to specific
message content
65535
maxEARFCN
RadioResourceConfigCo
mmonSCell-r10DEFAULT
RadioResourceConfigDe
dicatedSCell-r10DEFAULT
Set according to specific
message content
Band > 64
Band > 64
4Rx_SCC
fourLayers
0
SRSSwitching
}
Condition
Band > 64
4Rx_SCC
SRS-Switching
–
Explanation
If band > 64 is selected
For 4Rx testcases with more than 2 Layers on SCC
SRS transmission is switched to a PUSCH-less TDD SCell.
SCellToRelease-r10-DEFAULT
Table 4.6.3-19E: SCellToRelease-r10-DEFAULT
Derivation Path: 36.331 clause 6.2.2
Information Element
sCellToReleaseList-r10 SEQUENCE (SIZE
(1..maxSCell-r10) OF SEQUENCE {
sCellIndex-r10[1]
}
Value/remark
1
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
469
ETSI TS 136 508 V15.5.0 (2019-07)
SCG-Configuration-r12-DEFAULT
Table 4.6.3-19F: SCG-Configuration-r12-DEFAULT
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.2
Information Element
scg-Configuration-r12 CHOICE {
release
470
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
NULL
PSCell_Rele
ase
PSCell_Mod,
PSCell_Add
_Split_DRB,
PSCell_Add
_SCG_DRB
setup SEQUENCE {
scg-ConfigPartMCG-r12 SEQUENCE {
scg-Counter-r12
powerCoordinationInfo-r12 SEQUENCE {
p-MeNB-r12
0
INTEGER (0..
65535)
6 (30%)
INTEGER (1..16)
mapped to 0..15 in
Table 5.1.4.2-1 in
TS 36.213 for
power allocation
for DC (0% 100%)
INTEGER (1..16)
mapped to 0..15 in
Table 5.1.4.2-1 in
TS 36.213 for
power allocation
for DC (0% 100%)
DC power control
mode 1
p-SeNB-r12
6 (30%)
powerControlMode-r12
1
}
}
scg-ConfigPartSCG-r12 SEQUENCE {
radioResourceConfigDedicatedSCG-r12
SEQUENCE {
drb-ToAddModListSCG-r12 SEQUENCE (SIZE
(1..maxDRB)) OF SEQUENCE {
DRB-ToAddModSCG-r12[1] SEQUENCE {
drb-Identity-r12
PSCell_Add
_Split_DRB,
PSCell_Add
_SCG_DRB
1 entry
drb-Identity-r12
Same DRB ID as used
for the MCG
BID+1
drb-Type-r12 CHOICE {
split-r12
NULL
BID is the total
number of
established DRBs
in the UE, before
applying the
contents of this IE
}
}
rlc-ConfigSCG-r12
rlc-Config-v1250
logicalChannelIdentitySCG-r12
logicalChannelConfigSCG-r12
}
}
mac-MainConfigSCG-r12
rlf-TimersAndConstantsSCG-r12
BID+5
PDCP-Config-DRB-AM
RLC-Config-DRB-AM
Not present
2
LogicalChannelConfigDRB using condition LO
Not present
Not present
ETSI
PSCell_Add
_Split_DRB
PSCell_Add
_SCG_DRB
PSCell_Add
_Split_DRB
PSCell_Add
_SCG_DRB
scg-r12 SEQUENCE {
eps-BearerIdentity-r12
pdcp-Config-r12
Condition
drb-Identity-r12+4
drb-Identity-r12+2
3GPP TS 36.508 version 15.5.0 Release 15
}
sCellToReleaseListSCG-r12
pSCellToAddMod-r12 SEQUENCE {
sCellIndex-r12
cellIdentification-r12 SEQUENCE {
physCellId-r12
dl-CarrierFreq-r12
}
}
radioResourceConfigCommonPSCell-r12
SEQUENCE {
basicFields-r12
pucch-ConfigCommon-r12
rach-ConfigCommon-r12
uplinkPowerControlCommonPSCell-r12
SEQUENCE {
deltaF-PUCCH-Format3-r12
471
ETSI TS 136 508 V15.5.0 (2019-07)
Not Present
Set according to specific
message content
Set according to specific
message content
Set according to specific
message content
RadioResourceConfigCo
mmonSCell-r10DEFAULT
PUCCH-ConfigCommonDEFAULT
RACH-ConfigCommonDEFAULT
deltaF0
Same value as in
UplinkPowerContr
olCommon-v1020DEFAULT used
for the PCell
deltaF4
deltaF-PUCCH-Format1bCS-r12
deltaF1
p0-NominalPUCCH-r12
-117 (-117 dBm)
deltaFList-PUCCH-r12 SEQUENCE {
deltaF-PUCCH-Format1
deltaF0
deltaF-PUCCH-Format1b
deltaF3
deltaF-PUCCH-Format2
deltaF0
deltaF-PUCCH-Format2a
deltaF0
deltaF-PUCCH-Format2b
deltaF0
}
ETSI
RM coding
Dual RM
coding
Same value as in
UplinkPowerContr
olCommon-v1020DEFAULT used
for the PCell
Same value as in
UplinkPowerContr
olCommon-DEFAULT used
for the PCell
Same value as in
UplinkPowerContr
olCommonDEFAULT used
for the PCell
Same value as in
UplinkPowerContr
olCommonDEFAULT used
for the PCell
Same value as in
UplinkPowerContr
olCommonDEFAULT used
for the PCell
Same value as in
UplinkPowerContr
olCommonDEFAULT used
for the PCell
Same value as in
UplinkPowerContr
olCommonDEFAULT used
for the PCell
3GPP TS 36.508 version 15.5.0 Release 15
}
}
radioResourceConfigDedicatedPSCell-r12
SEQUENCE {
physicalConfigDedicatedPSCell-r12
sps-Config-r12
naics-Info-r12
ue-IdentitySCG-r12
rach-ConfigDedicated-r12
cipheringAlgorithmSCG-r12
PhysicalConfigDedicated
-DEFAULT
For signalling test
cases see
subclause
6.6B.1.1.1.
Otherwise, see
subclause 4.8.2
Not present
Not Present
ms2000
Any allowed value
Rach-ConfigDedicatedDEFAULT
Set according to PIXIT
parameter for default
ciphering algorithm
eea0
}
}
Condition
PSCell_Mod
PSCell_Release
PSCell_Add_Split_DRB
PSCell_Add_SCG_DRB
RM coding
Dual RM coding
For SIG
For RF
ETSI TS 136 508 V15.5.0 (2019-07)
Not present
Not present
}
antennaInfoDedicatedPSCell-v1280
}
sCellToAddModListSCG-r12
mobilityControlInfoSCG-r12
t307-r12
472
Explanation
Modification of PSCell(s)
Release of PSCell
Add PSCell(s) and setup of Split DRB
Add PSCell(s) and setup of SCG DRB
Used for Reed-Muller coding
Used for Dual Reed-Muller coding
Used for signalling test cases
Used for RF/RRM test cases
ETSI
ENUMERATED
{ms50, ms100,
ms150, ms200,
ms500,ms1000,
ms2000}
For SIG
For RF
3GPP TS 36.508 version 15.5.0 Release 15
–
473
ETSI TS 136 508 V15.5.0 (2019-07)
SchedulingRequest-Config-DEFAULT
Table 4.6.3-20: SchedulingRequest-Config-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
SchedulingRequest-Config-DEFAULT ::= CHOICE {
setup SEQUENCE {
sr-PUCCH-ResourceIndex
sr-ConfigIndex
Value/remark
See subclause 4.6.8
Comment
Channelbandwidthdependent
parameter
30
32
FDD
FDD and
(CEmodeA
or
CEmodeB)
and 3 MHz
BW
TDD
27
n4
dsr-TransMax
Condition
}
}
Condition
FDD
TDD
CEmodeA
CEmodeB
3 MHz BW
Explanation
FDD cell environment
TDD cell environment
Used for CE mode A testing
Used for CE mode B testing
Used for cells with 3 MHz bandwidth
Table 4.6.3-20A: Void
–
SchedulingRequestConfigSCell-r13-DEFAULT
Table 4.6.3-20B: SchedulingRequestConfigSCell-r13-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
SchedulingRequestConfigSCell-r13 ::= CHOICE {
setup SEQUENCE {
sr-PUCCH-ResourceIndex-r13
sr-PUCCH-ResourceIndexP1-r13
sr-ConfigIndex-r13
dsr-TransMax-13
Value/remark
See subclause 4.6.8
Not present
30
27
n4
}
}
Condition
FDD
TDD
Explanation
FDD cell environment
TDD cell environment
ETSI
Comment
Condition
Channelbandwidthdependent
parameter
FDD
TDD
3GPP TS 36.508 version 15.5.0 Release 15
474
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.6.3-20B: Void
–
SL-CommResourcePoolV2X-r14-DEFAULT
Table 4.6.3-20C: SL-CommResourcePoolV2X-r14-DEFAULT
Derivation Path: 36.331 clause 6.3.8
Information Element
SL-CommResourcePoolV2X-r14-DEFAULT ::=
SEQUENCE {
sl-OffsetIndicator-r14
sl-Subframe-r14 CHOICE {
bs20-r14
}
adjacencyPSCCH-PSSCH-r14
sizeSubchannel-r14
numSubchannel-r14
startRB-Subchannel-r14
startRB-PSCCH-Pool-r14
rxParametersNCell-r14
dataTxParameters-r14 {}
dataTxParameters-r14 SEQUENCE {
alpha-r12
p0-r12
}
zoneID-r14
threshS-RSSI-CBR-r14
poolReportId-r14
cbr-pssch-TxConfigList-r14
resourceSelectionConfigP2X-r14
syncAllowed-r14
restrictResourceReservationPeriod-r14
Value/remark
Condition
Not present
11110000000000000000
00001111000000000000
00000000111100000000
00000000000011110000
00000000000000001111
11111111111111111111
true
n5
n10
n10
0
Not present
Not present
Not present
BITMAP_1
BITMAP_2
BITMAP_3
BITMAP_4
BITMAP_5
BITMAP_6
BOOLEAN
BW10
BW20
COND_TX
al0
31
Not present
Not present
Not present
Not present
Not present
Not present
Not present
}
Condition
BW10
BW20
Comment
Explanation
10 MHz channel bandwidth for V2X communication
20 MHz channel bandwidth for V2X communication
ETSI
INTEGER (0..7)
INTEGER (0..45)
3GPP TS 36.508 version 15.5.0 Release 15
–
475
ETSI TS 136 508 V15.5.0 (2019-07)
SL-CommTxPoolSensingConfig-r14-DEFAULT
Table 4.6.3-20D: SL-CommTxPoolSensingConfig-r14-DEFAULT
Derivation Path: 36.331 clause 6.3.8
Information Element
SL-CommTxPoolSensingConfig-r14-DEFAULT ::=
SEQUENCE {
pssch-TxConfigList-r14
thresPSSCH-RSRP-List-r14 SEQUENCE (SIZE
(64)) OF SL-ThresPSSCH-RSRP-r14 {
SL-ThresPSSCH-RSRP-r14[n]
}
restrictResourceReservationPeriod-r14 SEQUENCE
(SIZE (1..maxReservationPeriod-r14)) OF SLRestrictResourceReservationPeriod-r14 {
SL-RestrictResourceReservationPeriod-r14[1]
SL-RestrictResourceReservationPeriod-r14[2]
SL-RestrictResourceReservationPeriod-r14[3]
SL-RestrictResourceReservationPeriod-r14[4]
SL-RestrictResourceReservationPeriod-r14[5]
SL-RestrictResourceReservationPeriod-r14[6]
SL-RestrictResourceReservationPeriod-r14[7]
SL-RestrictResourceReservationPeriod-r14[8]
SL-RestrictResourceReservationPeriod-r14[9]
SL-RestrictResourceReservationPeriod-r14[10]
SL-RestrictResourceReservationPeriod-r14[11]
SL-RestrictResourceReservationPeriod-r14[12]
}
probResourceKeep-r14
p2x-SensingConfig-r14
sl-ReselectAfter-r14
}
Value/remark
Comment
SL-PSSCH-TxConfigr14-DEFAULT
1
v0dot2
v0dot5
v1
v2
v3
v4
v5
v6
v7
v8
v9
v10
v0
Not present
Not present
ETSI
For n=1,2,…,64,
where n denotes
the index for the
threshold used for
sensing based UE
autonomous
resource selection
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
476
ETSI TS 136 508 V15.5.0 (2019-07)
SL-InterFreqInfoV2X-r14-DEFAULT
Table 4.6.3-20E: SL-InterFreqInfoV2X-r14-DEFAULT
Derivation Path: 36.331 clause 6.3.8
Information Element
SL-InterFreqInfoV2X-r14-DEFAULT ::= SEQUENCE {
plmn-IdentityList-r14
v2x-CommCarrierFreq-r14
Value/remark
sl-MaxTxPower-r14
Not present
set according to the
specific test configuration
Not present
sl-Bandwidth-r14
n50
v2x-SchedulingPool-r14
v2x-UE-ConfigList-r14
additionalSpectrumEmissionV2X-r14
Comment
INTEGER (30..33)
ENUMERATED
{n6, n15, n25,
n50, n75, n100}
n100
SLCommResourcePoolV2X
-r14-DEFAULT using
conditions BITMAP_4
and COND_TX
Not present
SL-V2X-InterFreqUEConfig-r14-DEFAULT
using condition SIB
SL-V2X-InterFreqUEConfig-r14-DEFAULT
using condition RRC
Not present
}
Condition
SIB
RRC
BW10
BW20
SCHEDULED
Explanation
Inter-frequency V2X configuration for SIB21
Inter-frequency V2X configuration for RRCConnectionReconfiguration
10 MHz channel bandwidth for V2X communication
20 MHz channel bandwidth for V2X communication
The resources the UE can use are scheduled by the NW.
ETSI
Condition
BW10
BW20
SCHEDULE
D
SIB
SIB
RRC
3GPP TS 36.508 version 15.5.0 Release 15
–
477
ETSI TS 136 508 V15.5.0 (2019-07)
SL-PSSCH-TxConfig-r14-DEFAULT
Table 4.6.3-20F: SL-PSSCH-TxConfig-r14-DEFAULT
Derivation Path: 36.331 clause 6.3.8
Information Element
SL-PSSCH-TxConfig-r14-DEFAULT ::= SEQUENCE {
typeTxSync-r14
thresUE-Speed-r14
parametersAboveThres-r14 SEQUENCE {
minMCS-PSSCH-r14
maxMCS-PSSCH-r14
minSubChannel-NumberPSSCH-r14
maxSubchannel-NumberPSSCH-r14
Value/remark
Condition
enb
kmph200
allowedRetxNumberPSSCH-r14
0
15
1
50
100
both
maxTxPower-r14
n0
Not present
}
parametersBelowThres-r14 SEQUENCE {
minMCS-PSSCH-r14
maxMCS-PSSCH-r14
minSubChannel-NumberPSSCH-r14
maxSubchannel-NumberPSSCH-r14
Comment
ENUMERATED
{n0, n1, both,
spare1}
allowedRetxNumberPSSCH-r14
4
25
1
50
100
n1
maxTxPower-r14
n0
Not present
BW10
BW20
RF
SIG
ENUMERATED
{n0, n1, both,
spare1}
BW10
BW20
RF
SIG
}
}
Condition
BW10
BW20
RF
SIG
–
Explanation
10 MHz channel bandwidth for V2X communication
20 MHz channel bandwidth for V2X communication
For RF, performance and RRM testing
For protocol testing
SL-TxPoolToAddMod-r14-DEFAULT
Table 4.6.3-20G: SL-TxPoolToAddMod-r14-DEFAULT
Derivation Path: 36.331 clause 6.3.8
Information Element
SL-TxPoolToAddMod-r14-DEFAULT ::= SEQUENCE
{
poolIdentity-r14
pool-r14
Value/remark
1
SLCommResourcePoolV2X
-r14-DEFAULT using
conditions BITMAP_5
and COND_TX
}
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
478
ETSI TS 136 508 V15.5.0 (2019-07)
SL-TxPoolToReleaseListV2X-r14-DEFAULT
Table 4.6.3-20H: SL-TxPoolToReleaseListV2X-r14-DEFAULT
Derivation Path: 36.331 clause 6.3.8
Information Element
SL-TxPoolToReleaseListV2X-r14-DEFAULT ::=
SEQUENCE (SIZE (1..maxSL-V2X-TxPool-r14)) OF
SL-V2X-TxPoolIdentity-r14 {
SL-V2X-TxPoolIdentity-r14[1]
}
Value/remark
1
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
479
ETSI TS 136 508 V15.5.0 (2019-07)
SL-V2X-ConfigDedicated-r14-DEFAULT
Table 4.6.3-20HA: SL-V2X-ConfigDedicated-r14-DEFAULT
Derivation Path: 36.331 clause 6.3.8
Information Element
SL-V2X-ConfigDedicated-r14-DEFAULT ::=
SEQUENCE {
commTxResources-r14 CHOICE {
commTxResources-r14 CHOICE {
release
setup CHOICE {
scheduled-r14 SEQUENCE {
sl-V-RNTI-r14
mac-MainConfig-r14 SEQUENCE {
periodic-BSR-TimerSL
retx-BSR-TimerSL
}
v2x-SchedulingPool-r14
mcs-r14
logicalChGroupInfoList-r14 SEQUENCE (SIZE
(1.. maxLCG-r13)) OF SL-PriorityList-r13
SL-PriorityList-r13[1] ::= SEQUENCE (SIZE
(1..maxSL-Prio-r13)) OF SL-Priority-r13 {
SL-Priority-r13[1]
SL-Priority-r13[2]
}
SL-PriorityList-r13[2] ::= SEQUENCE (SIZE
(1..maxSL-Prio-r13)) OF SL-Priority-r13 {
SL-Priority-r13[1]
SL-Priority-r13[2]
}
SL-PriorityList-r13[3] ::= SEQUENCE (SIZE
(1..maxSL-Prio-r13)) OF SL-Priority-r13 {
SL-Priority-r13[1]
SL-Priority-r13[2]
}
SL-PriorityList-r13[4] ::= SEQUENCE (SIZE
(1..maxSL-Prio-r13)) OF SL-Priority-r13 {
SL-Priority-r13[1]
SL-Priority-r13[2]
}
}
}
ue-Selected-r14
}
}
v2x-InterFreqInfoList-r14 SEQUENCE (SIZE
(0..maxFreqV2X-1-r14)) OF SL-InterFreqInfoV2X-r14
{
SL-InterFreqInfoV2X-r14[1]
SL-InterFreqInfoV2X-r14[1]
}
thresSL-TxPrioritization-r14
typeTxSync-r14
cbr-DedicatedTxConfigList-r14
Value/remark
Comment
Condition
Not present
SCHEDULE
D
RELEASE
SETUP
NULL
'1111'H
BIT STRING
(SIZE (16))
sf20
sf20
Not present
Not present
INTEGER (0..31)
4 entries
1
2
3
4
5
6
7
8
Not present
SL-InterFreqInfoV2X-r14DEFAULT using
condition RRC
SL-InterFreqInfoV2X-r14DEFAULT using
condition RRC and
SCHEDULED
Not present
enb
Not present
}
ETSI
UESELECTED
SCHEDULE
D
3GPP TS 36.508 version 15.5.0 Release 15
Condition
SCHEDULED
UE-SELECTED
RELEASE
SETUP
480
ETSI TS 136 508 V15.5.0 (2019-07)
Explanation
The resources the UE can use are scheduled by the NW.
The resources the UE can use are to be selected by the UE from set of resources
provided by the NW.
Release Communication Resources for V2X Sidelink communication
Setup Communication Resources for V2X Sidelink communication
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
481
ETSI TS 136 508 V15.5.0 (2019-07)
SL-V2X-InterFreqUE-Config-r14-DEFAULT
Table 4.6.3-20I: SL-V2X-InterFreqUE-Config-r14-DEFAULT
Derivation Path: 36.331 clause 6.3.8
Information Element
SL-V2X-InterFreqUE-Config-r14-DEFAULT ::=
SEQUENCE {
physCellIdList-r14
typeTxSync-r14
v2x-SyncConfig-r14
v2x-CommRxPool-r14 SEQUENCE (SIZE
(1..maxSL-V2X-RxPool-r14)) OF SLCommResourcePoolV2X-r14 {
SL-CommResourcePoolV2X-r14[1]
SL-CommResourcePoolV2X-r14[2]
SL-CommResourcePoolV2X-r14[3]
SL-CommResourcePoolV2X-r14[4]
SL-CommResourcePoolV2X-r14[5]
}
v2x-CommTxPoolNormal-r14 SEQUENCE (SIZE
(1..maxSL-V2X-TxPool-r14)) OF SLCommResourcePoolV2X-r14 {
SL-CommResourcePoolV2X-r14[1]
}
p2x-CommTxPoolNormal-r14
v2x-CommTxPoolExceptional-r14
v2x-ResourceSelectionConfig-r14
zoneConfig-r14
offsetDFN-r14
Value/remark
Comment
Condition
Not present
enb
Not present
SLCommResourcePoolV2X
-r14-DEFAULT using
conditions BITMAP_1
SLCommResourcePoolV2X
-r14-DEFAULT using
conditions BITMAP_2
SLCommResourcePoolV2X
-r14-DEFAULT using
conditions BITMAP_3
SLCommResourcePoolV2X
-r14-DEFAULT using
conditions BITMAP_4
SLCommResourcePoolV2X
-r14-DEFAULT using
conditions BITMAP_5
SLCommResourcePoolV2X
-r14-DEFAULT using
conditions BITMAP_1
and COND_TX
SLCommResourcePoolV2X
-r14-DEFAULT using
conditions BITMAP_5
and COND_TX
SIB
RRC
Not present
SLCommResourcePoolV2X
-r14-DEFAULT using
conditions BITMAP_3
and COND_TX
SLCommTxPoolSensingCo
nfig-r14-DEFAULT
Not present
Not present
}
Condition
SIB
RRC
Explanation
UE configuration for Sidelink communication mode 4 for SIB21
UE configuration for Sidelink communication mode 4 for RRCConnectionReconfiguration
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
482
ETSI TS 136 508 V15.5.0 (2019-07)
SL-V2X-PreconfigCommPool-r14-DEFAULT
Table 4.6.3-20J: SL-V2X-PreconfigCommPool-r14-DEFAULT
Derivation Path: 36.331 clause 9.3.2
Information Element
SL-V2X-PreconfigCommPool-r14-DEFAULT ::=
SEQUENCE {
sl-OffsetIndicator-r14
sl-Subframe-r14 CHOICE {
bs20-r14
}
adjacencyPSCCH-PSSCH-r14
sizeSubchannel-r14
numSubchannel-r14
startRB-Subchannel-r14
startRB-PSCCH-Pool-r14
dataTxParameters-r14
zoneID-r14
threshS-RSSI-CBR-r14
cbr-pssch-TxConfigList-r14
resourceSelectionConfigP2X-r14
syncAllowed-r14
restrictResourceReservationPeriod-r14
Value/remark
Condition
Not present
11110000000000000000
00001111000000000000
00000000111100000000
00000000000011110000
00000000000000001111
11111111111111111111
true
n5
n10
n10
0
Not present
31
Not present
Not present
Not present
Not present
Not present
Not present
}
Condition
BW10
BW20
Comment
Explanation
10 MHz channel bandwidth cell environment
20 MHz channel bandwidth cell environment
ETSI
BITMAP_1
BITMAP_2
BITMAP_3
BITMAP_4
BITMAP_5
BITMAP_6
BOOLEAN
BW10
BW20
p0-r12
INTEGER (0..7)
INTEGER (0..45)
3GPP TS 36.508 version 15.5.0 Release 15
–
483
ETSI TS 136 508 V15.5.0 (2019-07)
SL-V2X-PreconfigFreqInfo-r14-DEFAULT
Table 4.6.3-20K: SL-V2X-PreconfigFreqInfo-r14-DEFAULT
Derivation Path: 36.331 clause 9.3.2
Information Element
SL-V2X-PreconfigFreqInfo-r14-DEFAULT ::=
SEQUENCE {
v2x-CommPreconfigGeneral-r14 SEQUENCE {
Value/remark
SLPreconfigGeneralr12
-- PDCP
configuration
rohc-Profiles-r12 SEQUENCE {
profile0x0001-r12
profile0x0002-r12
profile0x0004-r12
profile0x0006-r12
profile0x0101-r12
profile0x0102-r12
profile0x0104-r12
false
false
false
false
false
false
false
}
carrierFreq-r12
f1 as per table 6.2.3.5-1
maxTxPower-r12
additionalSpectrumEmission-r12
26
1(NS_01)
sl-bandwidth-r12
Set according to specific
message content
tdd-ConfigSL-r12 SEQUENCE {
subframeAssignment
reserved-r12
additionalSpectrumEmission-v1440
}
}
v2x-CommPreconfigSync-r14
v2x-CommRxPoolList-r14 SEQUENCE (SIZE
(1..maxSL-V2X-RxPoolPreconf-r14)) OF SL-V2XPreconfigCommPool-r14 {
SL-V2X-PreconfigCommPool-r14[1]
}
v2x-CommTxPoolList-r14 SEQUENCE (SIZE
(1..maxSL-V2X-TxPoolPreconf-r14)) OF SL-V2XPreconfigCommPool-r14 {
SL-V2X-PreconfigCommPool-r14[1]
}
p2x-CommTxPoolList-r14
v2x-ResourceSelectionConfig-r14
zoneConfig-r14
syncPriority-r14
thresSL-TxPrioritization-r14
offsetDFN-r14
Comment
ARFCNValueEUTRA-r9
A-MPR doesn’t
apply by default.
See TS 36.101
table 6.2.4-1
TDD-ConfigSLr12
none
‘0000000000000000000’
B
Not present
Not present
1 entry
SL-V2XPreconfigCommPool-r14DEFAULT using
condition BITMAP_6
SL-V2XPreconfigCommPool-r14DEFAULT using
conditions BITMAP_6
and COND_TX
Not present
SLCommTxPoolSensingCo
nfig-r14-DEFAULT
Not present
gnss
Not present
Not present
}
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
484
ETSI TS 136 508 V15.5.0 (2019-07)
SoundingRS-UL-ConfigCommon-DEFAULT
Table 4.6.3-21: SoundingRS-UL-ConfigCommon-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
SoundingRS-UL-ConfigCommon-DEFAULT ::=
SEQUENCE {
setup SEQUENCE {
-srs-BandwidthConfig
srs-SubframeConfig
Value/remark
See subclause 4.6.8
sc0
sc4
ackNackSRS-SimultaneousTransmission
srs-MaxUpPts
}
TRUE
Comment
Channelbandwidthdependent
parameter
Assuming SRS
density is high
(see Table
5.5.3.3-1 in TS
36.211)
Assuming SRS
density is high
(see Table
5.5.3.3-2 in TS
36.211)
Typical value in
real network
Condition
FDD
TDD
Not Present
}
Condition
FDD
TDD
–
Explanation
FDD cell environment
TDD cell environment
SoundingRS-UL-ConfigDedicated-DEFAULT
Table 4.6.3-22: SoundingRS-UL-ConfigDedicated-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
SoundingRS-UL-ConfigDedicated-DEFAULT ::=
CHOICE {
setup SEQUENCE {
srs-Bandwidth
srs-HoppingBandwidth
freqDomainPosition
duration
srs-ConfigIndex
Value/remark
bw0
bw3
hbw0
0
TRUE
20
0
cs0
}
}
Condition
Explanation
ETSI
Condition
SRSFreqHo
pp
31
transmissionComb
cyclicShift
Comment
See Table 8.2-1 in
TS 36.213
INTEGER
(0..1023) See
Table 8.2-2 in TS
36.213
FDD
TDD
3GPP TS 36.508 version 15.5.0 Release 15
FDD
TDD
SRSFreqHopp
485
ETSI TS 136 508 V15.5.0 (2019-07)
FDD cell environment
TDD cell environment
Used for SRS frequency hopping.
Table 4.6.3-22AA: Void
–
SoundingRS-UL-ConfigDedicatedAperiodic-r10-DEFAULT
Table 4.6.3-22AB: SoundingRS-UL-ConfigDedicatedAperiodic-r10-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
SoundingRS-UL-ConfigDedicatedAperiodic-r10 ::=
CHOICE {
setup SEQUENCE {
srs-ConfigIndexAp-r10
srs-ConfigApDCI-Format4-r10
srs-ActivateAp-r10
}
}
–
Value/remark
Comment
Condition
Comment
Condition
10
Not present
Not present
SRB-ToAddModList-RECONFIG
Table 4.6.3-22A: SRB-ToAddModList-RECONFIG
Derivation Path: 36.331 clause 6.3.2
Information Element
SRB-ToAddModList ::= SEQUENCE (SIZE (1..2)) OF
SEQUENCE {
srb-Identity[1]
rlc-Config[1] CHOICE {
explicitValue
logicalChannelConfig[1] CHOICE {
defaultValue
}
srb-Identity[2]
rlc-Config[2] CHOICE {
explicitValue
}
logicalChannelConfig[2] CHOICE {
defaultValue
}
Value/remark
2 Entries
1
RLC-Config-SRB-AMRECONFIG
NULL
2
RLC-Config-SRB-AMRECONFIG
NULL
}
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
–
486
ETSI TS 136 508 V15.5.0 (2019-07)
SRS-TPC-PDCCH-Config-r14-DEFAULT
Table 4.6.3-22B: SRS-TPC-PDCCH-Config-r14-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
SRS-TPC-PDCCH-Config-r14-DEFAULT ::=
SEQUENCE {
release
setup SEQUENCE {
srs-TPC-RNTI-r14
startingBitOfFormat3B-r14
fieldTypeFormat3B-r14
srs-CC-SetIndexlist-
Value/remark
Comment
NULL
Condition
RELEASE
SETUP
'1100'H
0
4
1 bit SRS request,
2 bit TPC
command
Not present
}
}
Condition
RELEASE
SETUP
–
Explanation
Release PDCCH configuration for SRS TPC
Setup PDCCH configuration for SRS TPC
TDD-Config-DEFAULT
Table 4.6.3-23: TDD-Config-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
TDD-Config-DEFAULT ::= SEQUENCE {
subframeAssignment
specialSubframePatterns
}
–
Value/remark
Comment
Condition
Comment
Condition
sa1
Ssp6
TPC-PDCCH-Config-DEFAULT
Table 4.6.3-24: TPC-PDCCH-Config-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
TPC-PDCCH-Config-DEFAULT ::= CHOICE {
setup SEQUENCE {
tpc-RNTI
tpc-Index CHOICE {
indexOfFormat3
}
Value/remark
‘03FF’H
‘01FA’H
1
}
}
Condition
PUCCH
PUSCH
Explanation
For PUCCH
For PUSCH
ETSI
PUCCH
PUSCH
3GPP TS 36.508 version 15.5.0 Release 15
–
487
ETSI TS 136 508 V15.5.0 (2019-07)
TPC-PDCCH-ConfigSCell-r13-DEFAULT
Table 4.6.3-24A: TPC-PDCCH-ConfigSCell-r13-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
TPC-PDCCH-ConfigSCell-r13-DEFAULT ::= CHOICE
{
setup SEQUENCE {
tpc-Index-PUCCH-SCell-r13 CHOICE {
indexOfFormat3
}
}
}
–
Value/remark
Comment
Condition
1
UplinkPowerControlCommon-DEFAULT
Table 4.6.3-25: UplinkPowerControlCommon-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
UplinkPowerControlCommon-DEFAULT ::=
SEQUENCE {
p0-NominalPUSCH
Value/remark
-85 (-85 dBm)
alpha
al08 (0.8)
p0-NominalPUCCH
-117 (-117 dBm)
deltaFList-PUCCH SEQUENCE {
deltaF-PUCCH-Format1
deltaF0
deltaF-PUCCH-Format1b
deltaF3
deltaF-PUCCH-Format2
deltaF0
deltaF-PUCCH-Format2a
deltaF0
deltaF-PUCCH-Format2b
deltaF0
}
deltaPreambleMsg3
4
}
ETSI
Comment
Typical value in
real network
Typical value in
real network
Thermal noise = 121 dBm
NF = 5 dB
IoT = 6 dB
Required SNR = 7.5 dB (1-bit A/N)
-> -117 dB
In accordance
with RAN1
simulation results
In accordance
with RAN1
simulation results
In accordance
with RAN1
simulation results
In accordance
with RAN1
simulation results
In accordance
with RAN1
simulation results
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
488
ETSI TS 136 508 V15.5.0 (2019-07)
UplinkPowerControlCommonSCell-r10-DEFAULT
Table 4.6.3-25A: UplinkPowerControlCommonSCell-r10-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
UplinkPowerControlCommonSCell-r10 ::=
SEQUENCE {
p0-NominalPUSCH-r10
alpha-r10
}
–
Value/remark
Comment
Condition
-85 (-85 dBm)
al08 (0.8)
UplinkPowerControlCommon-v1020-DEFAULT
Table 4.6.3-25AA: UplinkPowerControlCommon-v1020-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
UplinkPowerControlCommon-v1020-DEFAULT ::=
SEQUENCE {
deltaF-PUCCH-Format3-r10
deltaF-PUCCH-Format1bCS-r10
Value/remark
deltaF0
deltaF4
deltaF1
}
Condition
RM coding
Dual RM coding
Explanation
Used for Reed-Muller coding
Used for Dual Reed-Muller coding
ETSI
Comment
Condition
RM coding
Dual RM
coding
3GPP TS 36.508 version 15.5.0 Release 15
–
489
ETSI TS 136 508 V15.5.0 (2019-07)
UplinkPowerControlCommonSCell-v1310-DEFAULT
Table 4.6.3-25AB: UplinkPowerControlCommonSCell-v1310-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
UplinkPowerControlCommonSCell-v1310-DEFAULT
::= SEQUENCE {
p0-NominalPUCCH
deltaFList-PUCCH SEQUENCE {
deltaF-PUCCH-Format1
Value/remark
-117 (-117 dBm)
Same value as in
UplinkPowerContr
olCommon-DEFAULT used
for the PCell
deltaF0
Same value as in
UplinkPowerContr
olCommonDEFAULT used
for the PCell
Same value as in
UplinkPowerContr
olCommonDEFAULT used
for the PCell
Same value as in
UplinkPowerContr
olCommonDEFAULT used
for the PCell
Same value as in
UplinkPowerContr
olCommonDEFAULT used
for the PCell
Same value as in
UplinkPowerContr
olCommonDEFAULT used
for the PCell
deltaF-PUCCH-Format1b
deltaF3
deltaF-PUCCH-Format2
deltaF0
deltaF-PUCCH-Format2a
deltaF0
deltaF-PUCCH-Format2b
deltaF0
}
deltaF-PUCCH-Format3-r12
deltaF-PUCCH-Format1bCS-r12
deltaF-PUCCH-Format4-r13
deltaF-PUCCH-Format5-13
Comment
Condition
Not present
Not present
Not present
Not present
}
–
UplinkPowerControlDedicated-DEFAULT
Table 4.6.3-26: UplinkPowerControlDedicated-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
UplinkPowerControlDedicated-DEFAULT ::=
SEQUENCE {
p0-UE-PUSCH
deltaMCS-Enabled
accumulationEnabled
p0-UE-PUCCH
pSRS-Offset
filterCoefficient
}
Value/remark
0
en0
TRUE
0
3 (-6 dB)
fc4
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
490
ETSI TS 136 508 V15.5.0 (2019-07)
UplinkPowerControlDedicated-v1020-DEFAULT
Table 4.6.3-26A: UplinkPowerControlDedicated-v1020-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
UplinkPowerControlDedicated-v1020 ::= SEQUENCE
{
deltaTxD-OffsetListPUCCH-r10
deltaTxD-OffsetListPUCCH-r10 SEQUENCE {
deltaTxD-OffsetPUCCH-Format1-r10
deltaTxD-OffsetPUCCH-Format1a1b-r10
deltaTxD-OffsetPUCCH-Format22a2b-r10
deltaTxD-OffsetPUCCH-Format3-r10
}
pSRS-OffsetAp-r10
Value/remark
Comment
Condition
Not Present
TxD
dB0
dB0
dB0
dB0
0
SRSAp
Not present
}
Condition
TxD
SRSAp
–
Explanation
When PUCCH Transmission Diversity is performed.
Aperiodic SRS configured
UplinkPowerControlDedicated-v1130-DEFAULT
Table 4.6.3-26BA: UplinkPowerControlDedicated-v1130-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
UplinkPowerControlDedicated-v1130 -DEFAULT ::=
SEQUENCE {
pSRS-Offset-v1130
pSRS-OffsetAp-v1130
deltaTxD-OffsetListPUCCH-v1130 = SEQUENCE {
deltaTxD-OffsetPUCCH-Format1bCS-r11
}
}
–
Value/remark
Comment
Condition
FFS
FFS
FFS
UplinkPowerControlDedicated-v1250-DEFAULT
Table 4.6.3-26BB: UplinkPowerControlDedicated-v1250-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
UplinkPowerControlDedicated-v1250 ::= SEQUENCE
{
set2PowerControlParameter CHOICE {
setup SEQUENCE {
tpc-SubframeSet-r12
p0-NominalPUSCH-SubframeSet2-r12
alpha-SubframeSet2-r12
p0-UE-PUSCH-SubframeSet2-r12
}
}
}
Value/remark
0001100111
-85 (-85 dBm)
al08 (0.8)
0
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
491
ETSI TS 136 508 V15.5.0 (2019-07)
UplinkPowerControlDedicatedSCell-r10-DEFAULT
Table 4.6.3-26B: UplinkPowerControlDedicatedSCell-r10-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
UplinkPowerControlDedicatedSCell-r10 ::=
SEQUENCE {
p0-UE-PUSCH-r10
deltaMCS-Enabled-r10
accumulationEnabled-r10
pSRS-Offset-r10
pSRS-OffsetAp-r10
filterCoefficient-r10
pathlossReferenceLinking-r10
}
–
Value/remark
Comment
Condition
0
en0
TRUE
7
7
fc4
sCell
UplinkPowerControlDedicatedSCell-v1310-DEFAULT
Table 4.6.3-26C: UplinkPowerControlDedicatedSCell-v1310-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
UplinkPowerControlDedicatedSCell-v1310 ::=
SEQUENCE {
p0-UE-PUCCH
deltaTxD-OffsetListPUCCH-r10
}
-
Value/remark
Comment
Condition
0
Not present
RadioResourceConfigDedicated-DRB-Mod
Table 4.6.3-27: RadioResourceConfigDedicated-DRB-Mod
Derivation Path: 36.331 clause 6.3.2
Information Element
RadioResourceConfigDedicated-DRB ::=
SEQUENCE {
srb-ToAddModList
drb-ToAddModList
}
drb-ToReleaseList
mac-MainConfig
sps-Config
physicalConfigDedicated
Value/remark
Not present
DRB-ToAddModListRECONFIG
Not present
Not present
Not present
Not present
}
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
492
ETSI TS 136 508 V15.5.0 (2019-07)
RadioResourceConfigDedicated-PCell-PATTERN
Table 4.6.3-28: RadioResourceConfigDedicated-PCell-PATTERN
Derivation Path: 36.331 clause 6.3.2
Information Element
measSubframePatternPCell ::= CHOICE {
MeasSubframePattern-r10 ::= CHOICE {
subframePatternFDD-r10
subframePatternTDD-r10
Value/remark
Comment
Condition
Comment
Condition
‘00110011001100110011
00110011001100110011’
B
FFS
}
}
-
OtherConfig-r9
Table 4.6.3-29: OtherConfig-r9
Derivation Path: 36.331 clause 6.3.6
Information Element
OtherConfig-r9 ::= SEQUENCE {
reportProximityConfig-r9 ::= SEQUENCE {
proximityIndicationEUTRA-r9
proximityIndicationUTRA-r9
}
IDC-Config-r11 SEQUENCE {
idc-Indication-r11
autonomouseDenialParameters-r11 ::=
SEQUENCE {
autonomousDenialSubframes-r11
autonomousDenialValidity-r11
}
}
PowerPrefIndicationConfig-r11 CHOICE {
Release
setup SEQUENCE {
powerPrefIndicationTimer-r11
}
}
delayBudgetReportingConfig-r14 CHOICE{
Release
setup SEQUENCE{
delayBudgetReportingProhibitTimer-r14
}
}
ObtainLocationConfig-r11 ::= SEQUENCE {
obtainLocation-r11
}
sps-AssistanceInfoReport-r14
measConfigAppLayer-r15
measConfigAppLayer-r15 :: = CHOICE {
Release
setup SEQUENCE {
measConfigAppLayerContainer-r15
serviceType
}
}
}
Value/remark
Not Present
Not Present
Not Present
Not Present
Not Present
NULL
Release
Setup
s30
NULL
eVoLTE
Release
Setup
s0
Not present
Not present
Not present
QMC
NULL
Octets string (1…1000)
qoe
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Condition
eVoLTE
QMC
Setup
Release
493
ETSI TS 136 508 V15.5.0 (2019-07)
Explanation
The UE is configured to setup or release delayBudgetReport in case of VoLTE
enhancement
The UE is configured to setup or release application layer QoE measurement report
The UE is allowed to send power preference indications or send delaybudgetreport.
The UE is not allowed to send power preference indications or send delay budgetreport.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
494
ETSI TS 136 508 V15.5.0 (2019-07)
WLAN-OffloadConfig-r12
Table 4.6.3-30: WLAN-OffloadConfig-DEFAULT
Derivation Path: 36.331 clause 6.3.6
Information Element
WLAN-OffloadConfig-r12::= SEQUENCE {
thresholdRSRP-r12
thresholdRSRP-r12::= SEQUENCE {
thresholdRSRP-Low-r12
thresholdRSRP-High-r12
}
thresholdRSRQ-r12
thresholdRSRQ-r12::= SEQUENCE {
thresholdRSRQ-Low-r12
thresholdRSRQ-High-r12
}
thresholdRSRQ-OnAllSymbolsWithWB-r12
thresholdRSRQ-OnAllSymbols-r12
thresholdRSRQ-WB-r12
thresholdChannelUtilization-r12
thresholdChannelUtilization-r12::= SEQUENCE {
thresholdChannelUtilizationLow-r12
thresholdChannelUtilizationHigh-r12
}
thresholdBackhaul-Bandwidth-r12
thresholdBackhaul-Bandwidth-r12::= SEQUENCE {
thresholdBackhaulDL-BandwidthLow-r12
thresholdBackhaulDL-BandwidthHigh-r12
thresholdBackhaulUL-BandwidthLow-r12
thresholdBackhaulUL-BandwidthHigh-r12
}
thresholdBeaconRSSI-r12
thresholdBeaconRSSI-r12::= SEQUENCE {
thresholdBeaconRSSI-Low-r12
thresholdBeaconRSSI-High-r12
Value/remark
Condition
Not Present
RSRP
Set according to specific
message content
Set according to specific
message content
Not Present
RSRQ
Set according to specific
message content
Set according to specific
message content
Not Present
Not Present
Not Present
Not Present
ChanUtiliza
tion
Set according to specific
message content
Set according to specific
message content
Not Present
BackhaulB
W
Set according to specific
message content
Set according to specific
message content
Set according to specific
message content
Set according to specific
message content
Not Present
BeaconRS
SI
Set according to specific
message content
Set according to specific
message content
}
offloadPreferenceIndicator-r12
‘1111 1111 1111 1111’B
t-SteeringWLAN-r12
0
}
Condition
RSRP
RSRQ
ChanUtilization
BackhaulBW
BeaconRSSI
Comment
Explanation
If RSRP based thresholds are to be used
If RSRQ based thresholds are to be used
If Channel Utilization based thresholds are to be used
If Backhaul bandwidth thresholds are to be used
If Beacon RSSI Thresholds are to be used
ETSI
All IP flows
enabled
Typical value in
real networks
3GPP TS 36.508 version 15.5.0 Release 15
–
495
ETSI TS 136 508 V15.5.0 (2019-07)
EIMTA-MainConfig-r12-DEFAULT
Table 4.6.3-31: EIMTA-MainConfig-r12-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
EIMTA-MainConfig-r12 ::= CHOICE {
setup SEQUENCE {
eimta-RNTI-r12
eimta-CommandPeriodicity-r12
eimta-CommandSubframeSet-r12
Value/remark
Comment
Set to the value of the CRNTI of the UE
sf10
1111111111
1100011000
Condition
FDD
TDD
}
}
Condition
FDD
TDD
–
Explanation
FDD cell environment
TDD cell environment
EIMTA-MainConfigServCell-r12-DEFAULT
Table 4.6.3-32: EIMTA-MainConfigServCell-r12-DEFAULT
Derivation Path: 36.331 clause 6.3.2
Information Element
EIMTA-MainConfigServCell-r12 ::= CHOICE {
setup SEQUENCE {
eimta-UL-DL-ConfigIndex-r12
eimta-HARQ-ReferenceConfig-r12
mbsfn-SubframeConfigList-v1250
mbsfn-SubframeConfigList-v1250 ::= CHOICE {
setup SEQUENCE {
mbsfn-SubframeConfigList
mbsfn-SubframeConfigList SEQUENCE (SIZE
(1..maxMBSFN-Allocations)) OF SEQUENCE {
radioframeAllocationPeriod
radioframeAllocationOffset
subframeAllocation CHOICE{
oneFrame
fourFrames
}
}
}
}
}
}
Condition
MBMS
FDD
TDD
Value/remark
Comment
Condition
1
Sa2
Not present
MBMS
Not present
MBMS
n4
1
0
FDD
TDD
‘100000’ B
‘000010’ B
Not present
Explanation
MBMS cell environment
FDD cell environment
TDD cell environment
ETSI
FDD
TDD
3GPP TS 36.508 version 15.5.0 Release 15
–
496
ETSI TS 136 508 V15.5.0 (2019-07)
LWIP-Configuration-GENERIC
Table 4.6.3-33: LWIP-Configuration-GENERIC (SSID)
Derivation Path: 36.331 clause 6.3.2
Information Element
LWIP-Configuration-r13 CHOICE {
setup SEQUENCE {
lwip-MobilityConfig-r13 SEQUENCE {
wlan-ToReleaseList-r13 OF SEQUENCE {
ssid-r12[1]
bssid-r12
hessid-r12
}
wlan-ToAddList-r13 OF SEQUENCE {
ssid-r12[1]
bssid-r12
hessid-r12
}
associationTimer-r13
successReportRequested-r13
}
TunnelConfigLWIP-r13 SEQUENCE {
ip-Address-r13 CHOICE {
ipv4-r13
ipv6-r13
}
ike-Identity-r13 SEQUENCE {
idI-r13
}
lwip-Counter-r13
}
Value/Remark
Comment
1 entry
SSID
Not Present
Not Present
RELEASE
1 entry
SSID
Not Present
Not Present
ADD
s10
true
10 seconds
[IP address of the LWIPSeGW, reachable from
the WLAN side]
[IP address of the LWIPSeGW, reachable from
the WLAN side]
[IKE Identity]
1
}
}
Condition
ADD
RELEASE
SUCCESS
Condition
Explanation
Add a WLAN entry to the mobility configuration
Release a WLAN entry from the mobility configuration
Request a WLAN status report after association
ETSI
SUCCESS
SUCCESS
3GPP TS 36.508 version 15.5.0 Release 15
–
497
ETSI TS 136 508 V15.5.0 (2019-07)
LWA-Configuration-GENERIC
Table 4.6.3-34: LWA-Configuration-GENERIC (SSID)
Derivation Path: 36.331 clause 6.3.2
Information Element
LWA-Configuration-r13 CHOICE {
setup SEQUENCE {
lwa-MobilityConfig-r13 SEQUENCE {
wlan-ToReleaseList-r13 OF SEQUENCE {
ssid-r12[1]
bssid-r12
hessid-r12
}
wlan-ToAddList-r13 OF SEQUENCE {
ssid-r12[1]
bssid-r12
hessid-r12
}
associationTimer-r13
successReportRequested-r13
}
lwa-WT-Counter-r13
}
}
Condition
ADD
RELEASE
SUCCESS
Value/Remark
Comment
Condition
1 entry
SSID
Not Present
Not Present
RELEASE
1 entry
SSID
Not Present
Not Present
ADD
s10
true
10 seconds
1
Explanation
Add a WLAN entry to the mobility configuration
Release a WLAN entry from the mobility configuration
Request a WLAN status report after association
ETSI
SUCCESS
SUCCESS
3GPP TS 36.508 version 15.5.0 Release 15
–
498
ETSI TS 136 508 V15.5.0 (2019-07)
LWIP-Configuration-W2-GENERIC
Table 4.6.3-35: LWIP-Configuration-W2-GENERIC (SSID1, SSID2)
Derivation Path: 36.331 clause 6.3.2
Information Element
LWIP-Configuration-r13 CHOICE {
setup SEQUENCE {
lwip-MobilityConfig-r13 SEQUENCE {
wlan-ToReleaseList-r13 OF SEQUENCE {
ssid-r12[1]
bssid-r12
hessid-r12
}
wlan-ToAddList-r13 OF SEQUENCE {
ssid-r12[1]
bssid-r12
hessid-r12
}
associationTimer-r13
successReportRequested-r13
}
TunnelConfigLWIP-r13 SEQUENCE {
ip-Address-r13 CHOICE {
ipv4-r13
ipv6-r13
}
ike-Identity-r13 SEQUENCE {
idI-r13
}
lwip-Counter-r13
}
Value/Remark
Comment
1 entry
SSID1
Not Present
Not Present
1 entry
SSID2
Not Present
Not Present
s10
true
10 seconds
[IP address of the LWIPSeGW, reachable from
the WLAN side]
[IP address of the LWIPSeGW, reachable from
the WLAN side]
[IKE Identity]
1
}
}
Condition
SUCCESS
Condition
Explanation
Request a WLAN status report after association
ETSI
SUCCESS
SUCCESS
3GPP TS 36.508 version 15.5.0 Release 15
–
499
ETSI TS 136 508 V15.5.0 (2019-07)
LWA-Configuration-W2-GENERIC
Table 4.6.3-36: LWA-Configuration-W2-GENERIC (SSID1, SSID2)
Derivation Path: 36.331 clause 6.3.2
Information Element
LWA-Configuration-r13 CHOICE {
setup SEQUENCE {
lwa-MobilityConfig-r13 SEQUENCE {
wlan-ToReleaseList-r13 OF SEQUENCE {
ssid-r12[1]
bssid-r12
hessid-r12
}
wlan-ToAddList-r13 OF SEQUENCE {
ssid-r12[1]
bssid-r12
hessid-r12
}
associationTimer-r13
successReportRequested-r13
}
lwa-WT-Counter-r13
}
}
Condition
–
Comment
Condition
1 entry
SSID1
Not Present
Not Present
1 entry
SSID2
Not Present
Not Present
s10
true
10 seconds
SUCCESS
SUCCESS
1
Explanation
Request a WLAN status report after association
SUCCESS
4.6.4
Value/Remark
Security control information elements
SecurityConfigHO-DEFAULT
Table 4.6.4-1: SecurityConfigHO-DEFAULT
Derivation Path: 36.331 clause 6.2,2, 6.3.3
Information Element
SecurityConfigHO-DEFAULT ::= SEQUENCE {
handoverType CHOICE {
intraLTE SEQUENCE {
securityAlgorithmConfig
keyChangeIndicator
nextHopChainingCount
}
}
}
Value/remark
Not present
FALSE
0
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
500
ETSI TS 136 508 V15.5.0 (2019-07)
SecurityConfigSMC-DEFAULT
Table 4.6.4-2: SecurityConfigSMC-DEFAULT
Derivation Path: 36.331 clause 6.2,2, 6.3.3
Information Element
SecurityConfigSMC-DEFAULT ::= SEQUENCE {
securityAlgorithmConfig SEQUENCE {
cipheringAlgorithm
integrityProtAlgorithm
Value/remark
Set according to PIXIT
parameter for default
ciphering algorithm
eea0
Set according to PIXIT
parameter for default
integrity protection
algorithm
spare1 or eia0-v920
eia1
eia2
}
}
Condition
For SIG
For RF
Explanation
Used for signalling test cases
Used for RF/RRM test cases
ETSI
Comment
Condition
For SIG
For RF
For SIG
This IE is set to
one of the
algorithms
supported by the
UE as indicated in
the IE "UE
network
capability" in the
ATTACH
REQUEST
message.
For RF
3GPP TS 36.508 version 15.5.0 Release 15
4.6.5
–
501
Mobility control information elements
MobilityControlInfo-HO
Table 4.6.5-1: MobilityControlInfo-HO
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 36.331 clause 6.3.4
Information Element
MobilityControlInfo-HO ::= SEQUENCE {
targetPhysCellId
carrierFreq SEQUENCE {
dl-CarrierFreq
}
carrierFreq SEQUENCE { }
carrierBandwidth
carrierBandwidth SEQUENCE {
dl-Bandwidth
ul-Bandwidth
502
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
Comment
Condition
Set according to specific
message content
Set according to specific
message content
Not present
Not present
Band > 64
SAME-BW
DIFF-BW
Same downlink
bandwidth as used for
target cell
Not present
}
additionalSpectrumEmission
t304
newUE-Identity
radioResourceConfigCommon
rach-ConfigDedicated
carrierFreq-v9e0 SEQUENCE {
dl-CarrierFreq-v9e0
}
mobilityControlInfoV2X-r14 SEQUENCE {
v2x-CommTxPoolExceptional-r14 SEQUENCE {
sl-OffsetIndicator-r14
sl-Subframe-r14
Not present
1
HO-toEUTRA
ms1000
SS arbitrarily selects a
value between ‘003C’H
and ‘FFF2’H.
RadioResourceConfigCo
mmon-DEFAULT
Not present
Rach-ConfigDedicatedDEFAULT
FullConfig,
HO-toEUTRA
Band > 64
Set according to specific
message content
HO-V2X
small-r12
bs20-r14
adjacencyPSCCH-PSSCH-r14
0
00000000
11110000
0000
TRUE
sizeSubchannel-r14
n5
ENUMERATED
{n5}
ENUMERATED
{n10}
ENUMERATED
{n5}
n10
numSubchannel-r14
n5
startRB-Subchannel-r14
startRB-PSCCH-Pool-r14
rxParametersNCell-r14
dataTxParameters-r14 SEQUENCE {
alpha-r12
p0-r12
}
zoneID-r14
0
Not present
Not present
}
v2x-CommRxPool-r14 SEQUENCE {
sl-OffsetIndicator-r14
sl-Subframe-r14
adjacencyPSCCH-PSSCH-r14
sizeSubchannel-r14
BOOLEAN
BW10
BW20
al0
31
Not present
0
00001111
00000000
0000
TRUE
n5
ETSI
small-r12
bs20-r14
BOOLEAN
ENUMERATED
{n5}
BW10
3GPP TS 36.508 version 15.5.0 Release 15
503
n10
numSubchannel-r14
n5
startRB-Subchannel-r14
startRB-PSCCH-Pool-r14
rxParametersNCell-r14
dataTxParameters-r14
zoneID-r14
0
Not present
Not present
Not present
Not present
}
v2x-CommSyncConfig-r14
cbr-MobilityTxConfigList-r14
Not present
Not present
ETSI TS 136 508 V15.5.0 (2019-07)
ENUMERATED
{n10}
ENUMERATED
{n5}
}
}
Condition
SAME-BW
DIFF-BW
Band > 64
HO-V2X
BW10
BW20
Explanation
Source and target cell are configured with same bandwidth
Source and target cell are configured with different bandwidth
If band > 64 is selected
V2X sidelink communication handover
10 MHz channel bandwidth for V2X communication
20 MHz channel bandwidth for V2X communication
ETSI
BW20
3GPP TS 36.508 version 15.5.0 Release 15
4.6.6
504
ETSI TS 136 508 V15.5.0 (2019-07)
Measurement information elements
-
MeasConfig-DEFAULT
Table 4.6.6-1: MeasConfig-DEFAULT
Derivation Path: 36.331, clause 6.3.5
Information Element
MeasConfig-DEFAULT ::= SEQUENCE {
measObjectToRemoveList
measObjectToAddModList
reportConfigToRemoveList
reportConfigToAddModList
measIdToRemoveList
measIdToAddModList
quantityConfig
s-Measure
preRegistrationInfoHRPD
speedStatePars
Value/remark
Comment
Not present
Not present
MeasObjectEUTRAGENERIC
Not present
Not present
ReportConfigToAddModL
ist_DEFAULT
Not present
Not present
MeasIdToAddModList_D
EFAULT
QuantityConfigDEFAULT
Not present
Not present
Not present
Condition
RF
RF
RF
}
measObjectToAddModList-v9e0 SEQUENCE {
Band > 64
and RF
measObjectEUTRA-v9e0 SEQUENCE {
N entries
carrierFreq-v9e0[n]
Downlink EARFCN for
Freq
}
}
measScaleFactor-r12
Note:
sf-EUTRA-cf1
For signalling test, table 6.5.1-1 is applied.
Condition
INTER-FREQ
INTER-RAT
Band > 64
intraFreq-CENeedForGaps
RF
IncMon
Explanation
For E-UTRA inter-freq measurements
For inter-RAT measurements with UTRAN and GERAN
If band > 64 is selected
For UE having set pc_intraFreq-CE-NeedForGaps to TRUE.
For RF, performance and RRM testing
For IncMon RRM testing
ETSI
N needs to be the
same number of
entries as in
measObjectToAdd
ModList
specifies the factor
for scaling the
measurement
performance
requirements in
TS 36.133
IncMon
3GPP TS 36.508 version 15.5.0 Release 15
-
505
ETSI TS 136 508 V15.5.0 (2019-07)
MeasGapConfig-GP1
Table 4.6.6-1A: MeasGapConfig-GP1
Derivation Path: 36.331, clause 6.3.5
Information Element
MeasGapConfig-GP1 ::= CHOICE {
setup SEQUENCE {
gapOffset CHOICE {
gp0
}
}
}
-
Value/remark
0
Comment
Condition
TGRP = 40 ms
MeasGapConfig-CE
Table 4.6.6-1BA: MeasGapConfig-CE
Derivation Path: 36.331, clause 6.3.5
Information Element
MeasGapConfig-CE ::= CHOICE {
setup SEQUENCE {
gapOffset CHOICE {
gp0
}
}
}
-
Value/remark
20
Comment
Condition
TGRP = 40 ms
MeasGapConfig-GP2
Table 4.6.6-1B: MeasGapConfig-GP2
Derivation Path: 36.331, clause 6.3.5
Information Element
MeasGapConfig-GP2 ::= CHOICE {
setup SEQUENCE {
gapOffset CHOICE {
gp1
}
}
}
Value/remark
0
ETSI
Comment
TGRP = 80 ms
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
506
ETSI TS 136 508 V15.5.0 (2019-07)
MeasDS-Config-DEFAULT
Table 4.6.6-1CA: MeasDS-Config-DEFAULT
Derivation Path: 36.331, clause 6.3.5
Information Element
MeasDS-Config-DEFAULT ::= CHOICE {
release
setup SEQUENCE {
dmtc-PeriodOffset-r12 CHOICE {
ms160-r12
}
ds-OccasionDuration-r12 CHOICE {
durationFDD-r12
durationTDD-r12
}
measCSI-RS-ToRemoveList-r12
measCSI-RS-ToAddModList-r12 SEQUENCE
(SIZE (1..maxCSI-RS-Meas-r12)) OF MeasCSI-RSConfig-r12 {
Value/remark
Comment
Condition
NULL
10
1
2
1
FDD
TDD
LAA SCell
Not present
Not present
MeasCSI-RS-ConfigDefault
CSI-RS
}
}
}
Condition
FDD
TDD
CSI-RS
LAA SCell
-
Explanation
FDD cell environment
TDD cell environment
For CSI-RS measurements
For LAA SCell environment
MeasCSI-RS-Config-DEFAULT
Table 4.6.6-1CB: MeasCSI-RS-Config-DEFAULT
Derivation Path: 36.331, clause 6.3.5
Information Element
MeasCSI-RS-Config-DEFAULT ::= SEQUENCE {
measCSI-RS-Id-r12
physCellId-r12
scramblingIdentity-r12
resourceConfig-r12
subframeOffset-r12
csi-RS-IndividualOffset-r12
Value/remark
Set according to specific
message content
Set according to specific
message content
1
2
0
0
}
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
–
507
ETSI TS 136 508 V15.5.0 (2019-07)
MeasObjectCDMA2000-GENERIC
Table 4.6.6-1C: MeasObjectCDMA2000-GENERIC
Derivation Path: 36.331 clause 6.3.5
Information Element
MeasObjectCDMA2000-GENERIC ::= SEQUENCE {
cdma2000-Type
carrierFreq SEQUENCE {
bandClass
arfcn
Value/remark
As per specific message
content
[type1XRTT,
typeHRPD]
As per specific message
content
Should be one of
the following: bc0,
bc1, bc2, bc3,
bc4, bc5, bc6,
bc7, bc8, bc9,
bc10, bc11, bc12,
bc13, bc14, bc15,
bc16, bc17,
spare14, spare13,
spare12, spare11,
spare10,spare9,
spare8, spare7,
spare6, spare5,
spare4, spare3,
spare2, spare1, ...
INTEGER (0 to
2047)
Downlink channel
number
}
searchWindowSize
offsetFreq
cellsToRemoveList
cellsToAddModList
cellForWhichToReportCGI
Comment
As per specific message
content
0 (0 dB)
Not present
[Not present]
Not present
Condition
INTEGER (0..15)
}
–
ReportConfigToAddModList_DEFAULT
Table 4.6.6-1D: ReportConfigToAddModList_DEFAULT
Derivation Path: 36.331, clause 6.3.5
Information Element
ReportConfigToAddModList_DEFAULT ::=
SEQUENCE {
reportConfigId[1]
reportConfig[1]
Value/remark
1 entry
IdReportConfig-A3
ReportConfigEUTRA-A3
}
–
MeasIdToAddModList_DEFAULT
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
508
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.6.6-1E: MeasIdToAddModList_DEFAULT
Derivation Path: 36.331, clause 6.3.5
Information Element
MeasIdToAddModList_DEFAULT ::= SEQUENCE {
measId[1]
measObjectId[1]
reportConfigId[1]
}
-
Value/remark
1 entry
1
IdMeasObject-f1
IdReportConfig-A3
Comment
Condition
Comment
Condition
MeasObjectEUTRA-GENERIC
Table 4.6.6-2: MeasObjectEUTRA-GENERIC(Freq)
Derivation Path: 36.331 clause 6.3.5
Information Element
MeasObjectEUTRA-GENERIC(Freq) ::= SEQUENCE
{
carrierFreq
carrierFreq
allowedmeasBandwidth
presenceAntennaPort1
neighbourCellConfig
offsetFreq
cellsToRemoveList
cellsToAddModList
blackCellsToRemoveList
blackCellsToAddModList
cellForWhichToReportCGI
measCycleSCell-r10
measSubframePatternConfigNeigh-r10
measDS-Config-r12
reducedMeasPerformance-r12
rmtc-Config-r13
tx-ResourcePoolToRemoveList-r14
tx-ResourcePoolToAddList-r14
Value/remark
Downlink EARFCN for
Freq
65535
The number of the
resource blocks for Freq
FALSE
TRUE
'01'B (No MBSFN
subframes are present in
all neighbour cells)
0 (dB 0)
Not present
Not present
Not present
Not present
Not present
sf512
Not present
MeasDS-ConfigDEFAULT
TRUE
maxEARFCN
Band > 64
At least two cellspecific antenna
ports are used in
all neighbouring
cells.
MBSFN doesn’t
apply by default.
All
neighCells
with port1
SCell_EXI
ST
DS_Meas
For reduced
measurement
performance,
otherwise it is
normal
measurement
performance
Not present
Not present
Not present
}
Condition
SCell_EXIST
All neighCells with
port1
DS_Meas
Band > 64
IncMon
Explanation
When SCell exists on the carrier frequency indicated by carrierFreq
Used for all neighbouring cells with at least two cell-specific antenna ports
Used for discovery signals measurement on the carrier frequency indicated by
carrierFreq
If band > 64 is selected
For IncMon RRM testing
ETSI
IncMon
3GPP TS 36.508 version 15.5.0 Release 15
-
509
ETSI TS 136 508 V15.5.0 (2019-07)
MeasObjectGERAN-GENERIC
Table 4.6.6-2A: MeasObjectGERAN-GENERIC(Freq)
Derivation Path: 36.331 clause 6.3.5
Information Element
MeasObjectGERAN-GENERIC(Freq) ::= SEQUENCE
{
carrierFreqs SEQUENCE {
startingARFCN
bandIndicator
followingARFCNs CHOICE {
explicitListOfARFCNs
Value/remark
Comment
Condition
Downlink GERAN
ARFCN of Freq
Set according to the
band used for GERAN
cells under test
Set the corresponding
ARFCN of GERAN cells
under test
}
}
offsetFreq
ncc-Permitted
cellForWhichToReportCGI
0 (dB 0)
‘01000000'B
Not present
NCC=1 permitted
}
-
MeasObjectNR-GENERIC
Table 4.6.6-2B: MeasObjectNR-GENERIC (Freq)
Derivation Path: 36.331 clause 6.3.5
Information Element
MeasObjectNR-GENERIC(Freq) ::= SEQUENCE {
carrierFreq-r15
rs-ConfigSSB-r15 ::= SEQUENCE {
measTimingConfig-r15 ::= SEQUENCE {
periodicityAndOffset-r15 CHOICE {
sf10-r15
}
ssb-Duration-r15
}
subcarrierSpacingSSB-r15
}
threshRS-Index-r15
maxRS-IndexCellQual-r15
offsetFreq-r15
blackCellsToRemoveList-r15
blackCellsToAddModList-r15
quantityConfigSet-r15
Value/remark
Comment
Downlink ARFCN of
ssbFrequency
0
sf5
kHz15
kHz30
kHz120
Not present
Not present
0
Not present
Not present
1
}
Condition
FR1_FDD
FR1_TDD
FR2_TDD
Condition
Explanation
FDD frequency range < 6GHz
TDD frequency range < 6GHz
TDD frequency range > 6GHz
ETSI
FR1_FDD
FR1_TDD
FR2_TDD
3GPP TS 36.508 version 15.5.0 Release 15
-
510
ETSI TS 136 508 V15.5.0 (2019-07)
MeasObjectUTRA-GENERIC
Table 4.6.6-3: MeasObjectUTRA-GENERIC(Freq)
Derivation Path: 36.331 clause 6.3.5
Information Element
MeasObjectUTRA-GENERIC(Freq) ::= SEQUENCE {
carrierFreq
Value/remark
offsetFreq
cellsToRemoveList
cellsToAddModList
Downlink UARFCN of
Freq
0 (dB 0)
Not present
Not present
cellForWhichToReportCGI
reducedMeasPerformance-r12
Not present
TRUE
Comment
Condition
For UTRA, the
neighbouring cell
list needs to be
provided in
specific test
cases.
For reduced
measurement
performance,
otherwise it is
normal
measurement
performance
IncMon
}
Condition
IncMon
–
Explanation
For IncMon RRM testing
MeasObjectWLAN-W2-GENERIC
Table 4.6.6-3AB: MeasObjectWLAN-W2-GENERIC (Freq, SSID1, SSID2)
Derivation Path: 36.331 clause 6.3.5
Information Element
measObjectWLAN-r13 SEQUENCE {
carrierFreq-r13
wlan-ToAddModList-r13 OF SEQUENCE {
ssid-r12[1]
ssid-r12[2]
}
wlan-ToRemoveList-r13
Value/Remark
Freq
SSID1
SSID2
Not Present
}
ETSI
Comment
WLAN band and
carrier as used in
test setup for 2
entries
2 entries
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
511
ETSI TS 136 508 V15.5.0 (2019-07)
QuantityConfig-DEFAULT
Table 4.6.6-3A: QuantityConfig-DEFAULT
Derivation Path: 36.331, clause 6.3.5
Information Element
QuantityConfig-DEFAULT ::= SEQUENCE {
quantityConfigEUTRA SEQUENCE {
filterCoefficientRSRP
filterCoefficientRSRQ
}
quantityConfigUTRA SEQUENCE {}
quantityConfigUTRA SEQUENCE {
measQuantityUTRA-FDD
measQuantityUTRA-FDD
measQuantityUTRA-TDD
filterCoefficient
}
quantityConfigGERAN SEQUENCE {}
quantityConfigGERAN SEQUENCE {
measQuantityGERAN
filterCoefficient
}
quantityConfigCDMA2000 SEQUENCE {}
quantityConfigCDMA2000 SEQUENCE {
measQuantityCDMA2000
}
quantityConfigEUTRA-v1250 SEQUENCE {
filterCoefficientCSI-RSRP-r12
}
Value/remark
Not present
Not present
Condition
DEFAULT fc4
DEFAULT fc4
Not present
UTRAN
cpich-EcN0
cpich-RSCP
pccpch-RSCP
Not present
For signalling test
cases
DEFAULT fc4
Not present
GERAN
rssi
Not present
DEFAULT fc2
Not present
CDMA2000
[FFS]
Not present
}
Condition
UTRAN
GERAN
CDMA2000
CSI-RSRP
Comment
Explanation
For inter-RAT measurements with UTRAN
For inter-RAT measurements with GERAN
For inter-RAT measurements with CDMA2000
For CSI-RSRP measurements
ETSI
DEFAULT fc4
CSI-RSRP
3GPP TS 36.508 version 15.5.0 Release 15
-
512
ETSI TS 136 508 V15.5.0 (2019-07)
ReportConfigEUTRA-A1
Table 4.6.6-4: ReportConfigEUTRA-A1(Thres)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigEUTRA-A1(Thres) ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventA1 SEQUENCE {
a1-Threshold CHOICE {
threshold-RSRP
Value/remark
Thres+140
Comment
Condition
Thres is actual
threshold value in
dBm
}
}
}
hysteresis
timeToTrigger
0 (0 dB)
ms256
}
}
triggerQuantity
reportQuantity
maxReportCells
reportInterval
reportAmount
rsrp
both
1
ms1024
r1
}
-
ReportConfigEUTRA-A2
Table 4.6.6-5: ReportConfigEUTRA-A2(Thres)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigEUTRA-A2(Thres) ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventA2 SEQUENCE {
a2-Threshold CHOICE {
threshold-RSRP
Value/remark
Thres+140
}
}
}
hysteresis
timeToTrigger
0 (0 dB)
ms320
}
}
triggerQuantity
reportQuantity
maxReportCells
reportInterval
reportAmount
rsrp
both
1
ms1024
r1
}
ETSI
Comment
Thres is actual
threshold value in
dBm
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
513
ETSI TS 136 508 V15.5.0 (2019-07)
ReportConfigEUTRA-A3
Table 4.6.6-6: ReportConfigEUTRA-A3
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigEUTRA-A3 ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventA3 SEQUENCE {
a3-Offset
reportOnLeave
Value/remark
0 (0 dB)
FALSE
}
}
hysteresis
timeToTrigger
0 (0 dB)
ms640
}
}
triggerQuantity
reportQuantity
maxReportCells
reportInterval
reportAmount
rsrp
both
1
ms1024
r1
}
ETSI
Comment
To reduce
interference
between intrafrequency multiple
cells
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
514
ETSI TS 136 508 V15.5.0 (2019-07)
ReportConfigEUTRA-A4
Table 4.6.6-6AA: ReportConfigEUTRA-A4(Thres)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigEUTRA-A4 ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventA4 SEQUENCE {
a4-Threshold CHOICE{
threshold-RSRP
threshold-RSRQ
Value/remark
Thres + 140
Thres * 2 + 40
Comment
Condition
Thres is actual
threshold value in
dBm
Thres is actual
threshold value in
dB
Not RSRQ
RSRQ
}
}
}
hysteresis
timeToTrigger
0 (0 dB)
ms0
}
}
triggerQuantity
reportQuantity
maxReportCells
reportInterval
reportAmount
si-RequestForHO-r9
ue-RxTxTimeDiffPeriodical-r9
rsrp
rsrq
both
1
ms1024
r1
Not Present
Not Present
}
Condition
RSRQ
Explanation
When RSRQ based measurement is applied
ETSI
Not RSRQ
RSRQ
3GPP TS 36.508 version 15.5.0 Release 15
-
515
ETSI TS 136 508 V15.5.0 (2019-07)
ReportConfigEUTRA-A5
Table 4.6.6-6AB: ReportConfigEUTRA-A5(Thres1, Thres2)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigEUTRA-A5 ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventA5 SEQUENCE {
a5-Threshold1 CHOICE{
threshold-RSRP
threshold-RSRQ
Value/remark
Thres1 + 140
Thres1 * 2 + 40
}
a5-Threshold2 CHOICE{
threshold-RSRP
threshold-RSRQ
Thres2 + 140
Thres2 * 2 + 40
Comment
Condition
Thres1 is actual
threshold value in
dBm
Thres1 is actual
threshold value in
dB
Not RSRQ
Thres2 is actual
threshold value in
dBm
Thres2 is actual
threshold value in
dB
RSRQ
Not RSRQ
RSRQ
}
}
}
hysteresis
timeToTrigger
0 (0 dB)
ms0
}
}
triggerQuantity
reportQuantity
maxReportCells
reportInterval
reportAmount
si-RequestForHO-r9
ue-RxTxTimeDiffPeriodical-r9
rsrp
rsrq
both
1
ms1024
r1
Not Present
Not Present
}
Condition
RSRQ
Explanation
See the definition below table 4.6.6-6AA.
ETSI
Not RSRQ
RSRQ
3GPP TS 36.508 version 15.5.0 Release 15
-
516
ETSI TS 136 508 V15.5.0 (2019-07)
ReportConfigEUTRA-A6
Table 4.6.6-6A: ReportConfigEUTRA-A6
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigEUTRA-A6 ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventA6-r10 SEQUENCE {
a6-Offset-r10
a6-ReportOnLeave-r10
}
}
hysteresis
timeToTrigger
}
}
triggerQuantity
reportQuantity
maxReportCells
reportInterval
reportAmount
si-RequestForHO-r9
ue-RxTxTimeDiffPeriodical-r9
includeLocationInfo-r10
reportAddNeighMeas-r10
}
-
Value/remark
Comment
Condition
Comment
Condition
0 (0 dB)
FALSE
0 (0 dB)
ms640
rsrp
both
1
ms1024
r1
Not Present
Not Present
Not Present
Not Present
ReportConfigEUTRA-PERIODICAL
Table 4.6.6-7: ReportConfigEUTRA-PERIODICAL
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigEUTRA-PERIODICAL ::= SEQUENCE {
triggerType CHOICE {
periodical SEQUENCE {
purpose
}
}
triggerQuantity
reportQuantity
maxReportCells
reportInterval
reportAmount
}
Value/remark
reportStrongestCells
rsrp
both
1
ms1024
infinity
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
517
ETSI TS 136 508 V15.5.0 (2019-07)
ReportConfigInterRAT-B1-GERAN
Table 4.6.6-7A: ReportConfigInterRAT-B1-GERAN(GERAN-Thres)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigInterRAT-B1-GERAN(GERAN-Thres) ::=
SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventB1 SEQUENCE {
b1-Threshold CHOICE {
b1-ThresholdGERAN
Value/remark
Comment
(GERAN-Thres + 110)
GERAN-Thres is
actual value in
dBm
0
ms0
INTEGER(0..30)
}
}
maxReportCells
6
In line with RAN4
requirement
reportInterval
reportAmount
ms1024
r1
Condition
}
}
}
hysteresis
timeToTrigger
}
-
ReportConfig-B1-NR-r15
Table 4.6.6-7AA: ReportConfig-B1-NR-r15(NR_Thres)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfig-B1-NR ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventB1-NR-r15 SEQUENCE{
b1-ThresholdNR-r15 CHOICE{
nr-RSRP-r15
}
reportOnLeave-r15
Value/remark
NR_Thres
FALSE
}
}
hysteresis
timeToTrigger
}
maxReportCells
reportInterval
reportAmount
0
ms0
6
ms1024
r1
}
ETSI
Comment
NR_Thres is
actual RSCP
value in dBm
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
518
ETSI TS 136 508 V15.5.0 (2019-07)
ReportConfigInterRAT-B1-UTRA
Table 4.6.6-7B: ReportConfigInterRAT-B1-UTRA(UTRA-Thres)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigInterRAT-B1-UTRA(UTRA-Thres) ::=
SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventB1 SEQUENCE {
b1-Threshold CHOICE {
b1-ThresholdUTRA CHOICE {
utra-EcN0
utra-RSCP
Value/remark
(UTRA-Thres * 2 + 49)
UTRA-Thres + 115
utra-RSCP
UTRA-Thres + 115
Comment
UTRA-Thres is
actual Ec/NO
value in dB
For signalling test
cases
UTRA-Thres is
actual RSCP
value in dBm
UTRA-Thres is
actual RSCP
value in dBm
}
}
}
}
hysteresis
timeToTrigger
3 (1.5 dB)
ms0
}
}
maxReportCells
6
reportInterval
reportAmount
ms1024
r1
In line with RAN4
requirement
}
Condition
UTRA-FDD
UTRA-TDD
Explanation
UTRA FDD cell environment
UTRA TDD cell environment
ETSI
Condition
UTRAFDD
UTRAFDD
UTRATDD
3GPP TS 36.508 version 15.5.0 Release 15
-
519
ETSI TS 136 508 V15.5.0 (2019-07)
ReportConfigInterRAT-B2-CDMA2000
Table 4.6.6-7C: ReportConfigInterRAT-B2-CDMA2000(EUTRA-Thres, CDMA2000-Thres)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigInterRAT-B2-CDMA2000(EUTRA-Thres,
CDMA2000-Thres) ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventB2 SEQUENCE {
b2-Threshold1 CHOICE {
threshold-RSRP
Value/remark
Comment
EUTRA-Thres+140
EUTRA-Thres is
actual threshold
value in dBm
[30 (-15 dB)]
Integer (0..63)
}
}
hysteresis
timeToTrigger
[2 (1 dB)]
ms0
INTEGER(0..30)
}
}
maxReportCells
reportInterval
[8]
[ms2048]
reportAmount
[r1]
}
b2-Threshold2 CHOICE {
b2-Threshold2CDMA2000
}
}
ETSI
Range: ms120,
ms240, ms480,
ms640, ms1024,
ms2048, ms5120,
ms10240, min1,
min6, min12,
min30, min60,
spare3, spare2,
spare1
Range: r1, r2, r4,
r8, r16, r32, r64,
infinity
Condition
3GPP TS 36.508 version 15.5.0 Release 15
520
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.6.6-7D: Void
-
ReportConfigInterRAT-B2-GERAN
Table 4.6.6-7E: ReportConfigInterRAT-B2-GERAN(EUTRA-Thres, GERAN-Thres)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigInterRAT-B2-GERAN(EUTRA-Thres,
GERAN-Thres) ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventB2 SEQUENCE {
b2-Threshold1 CHOICE {
threshold-RSRP
Value/remark
Comment
EUTRA-Thres+140
EUTRA-Thres is
actual threshold
value in dBm
GERAN-Thres + 110
GERAN-Thres is
actual value in
dBm
0
ms0
INTEGER(0..30)
}
}
maxReportCells
6
In line with RAN4
requirement
reportInterval
reportAmount
ms1024
r1
}
b2-Threshold2 CHOICE {
b2-Threshold2GERAN
}
}
}
hysteresis
timeToTrigger
}
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
521
ETSI TS 136 508 V15.5.0 (2019-07)
ReportConfigInterRAT-B2-UTRA
Table 4.6.6-8: ReportConfigInterRAT-B2-UTRA(EUTRA-Thres, UTRA-Thres)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigInterRAT-B2-UTRA(EUTRA-Thres,
UTRA-Thres) ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventB2 SEQUENCE {
b2-Threshold1 CHOICE {
threshold-RSRP
}
b2-Threshold2 CHOICE {
b2-Threshold2UTRA CHOICE {
utra-EcN0
utra-RSCP
Value/remark
EUTRA-Thres+140
EUTRA-Thres is
actual threshold
value in dBm
UTRA-Thres * 2 + 49
UTRA-Thres is
actual Ec/NO
value in dB
For signalling test
cases
UTRA-Thres + 115
utra-RSCP
Comment
UTRA-Thres + 115
UTRA-Thres is
actual RSCP
value in dBm
UTRA-Thres is
actual RSCP
value in dBm
}
}
}
}
hysteresis
timeToTrigger
3 (1.5 dB)
ms0
}
}
maxReportCells
6
reportInterval
reportAmount
ms1024
r1
In line with RAN4
requirement
}
Condition
UTRA-FDD
UTRA-TDD
Explanation
UTRA FDD cell environment
UTRA TDD cell environment
ETSI
Condition
UTRAFDD
UTRAFDD
UTRATDD
3GPP TS 36.508 version 15.5.0 Release 15
522
ETSI TS 136 508 V15.5.0 (2019-07)
-ReportConfigInterRAT-B2-NR
Table 4.6.6-8A: ReportConfigInterRAT-B2-NR(EUTRA-Thres, NR-Thres)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigInterRAT-B2-NR ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventB2-NR-r15 SEQUENCE{
b2-Threshold1-r15 CHOICE{
threshold-RSRP
Value/remark
Comment
EUTRA Thres
EUTRA Thres is
an entry value into
a mapping table in
TS 36.133 [39]
}
b2-Threshold2NR-r15 CHOICE{
nr-RSRP-r15
NR Thres
NR Thres is an
entry value into a
mapping table in
TS 38.133 [72]
}
reportOnLeave-r15
FALSE
Condition
}
}
Hysteresis
timeToTrigger
3 (1.5 dB)
ms1024
}
}
reportInterval
reportAmount
ms1024
infinity
}
ReportConfigInterRAT-PERIODICAL
Table 4.6.6-9: ReportConfigInterRAT-PERIODICAL
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigInterRAT-PERIODICAL ::= SEQUENCE
{
triggerType CHOICE {
periodical SEQUENCE {
purpose
}
}
maxReportCells
reportInterval
reportAmount
}
Value/remark
reportStrongestCells
1
ms1024
infinity
ETSI
Comment
Condition
3GPP TS 36.508 version 15.5.0 Release 15
523
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.6.6-9A: ReportConfigInterRAT-W1-WLAN (ThreshDB)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigInterRAT ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventID CHOICE {
eventW1-r13 SEQUENCE {
w1-Threshold-r13
}
hysteresis
timeToTrigger
}
}
}
}
–
Value/Remark
Comment
Condition
1 entry
1 entry
ThreshDB+101
2
ms5120
2 * .5 is 1dB
5120ms
ReportConfigInterRAT-W2-WLAN
Table 4.6.6-9B: ReportConfigInterRAT-W2-WLAN (Thresh1DB, Thresh2DB)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigInterRAT::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventID CHOICE {
eventW2-r13 SEQUENCE {
w2-Threshold1-r13
w2-Threshold2-r13
}
hysteresis
timeToTrigger
}
}
}
}
–
Value/Remark
Comment
Condition
1 entry
2 entries
Thresh1DB+101
Thresh2DB+101
2
ms5120
2 * .5 is 1dB
5120ms
ReportConfigInterRAT-W3-WLAN
Table 4.6.6-9C: ReportConfigInterRAT-W3-WLAN (ThreshDB)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigInterRAT::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventID CHOICE {
eventW3-r13 SEQUENCE {
W3-Threshold-r13
}
hysteresis
timeToTrigger
}
}
}
}
Value/Remark
Comment
1 entry
1 entry
ThreshDB+101
2
ms5120
ETSI
2 * .5 is 1dB
5120ms
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
524
ETSI TS 136 508 V15.5.0 (2019-07)
ReportConfigEUTRA-C1
Table 4.6.6-10: ReportConfigEUTRA-C1(Thres)
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigEUTRA-C1 ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventC1-r12 SEQUENCE {
c1-Threshold-r12
c1-ReportOnLeave-r12
Value/remark
Thres+140
FALSE
}
}
hysteresis
timeToTrigger
}
}
triggerQuantity
reportQuantity
maxReportCells
reportInterval
reportAmount
si-RequestForHO-r9
ue-RxTxTimeDiffPeriodical-r9
includeLocationInfo-r10
reportAddNeighMeas-r10
alternativeTimeToTrigger-r12
useT312-r12
usePSCell-r12
aN-Threshold1-v1250
a5-Threshold2-v1250
reportStrongestCSI-RSs-r12
reportCRS-Meas-r12
triggerQuantityCSI-RS-r12
0 (0 dB)
ms640
rsrp
sameAsTriggerQuantity
1
ms1024
r1
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
false
false
true
}
ETSI
Comment
Thres is actual
threshold value in
dBm
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
525
ETSI TS 136 508 V15.5.0 (2019-07)
ReportConfigEUTRA-C2
Table 4.6.6-11: ReportConfigEUTRA-C2
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigEUTRA-C2 ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventC2-r12 SEQUENCE {
c2-RefCSI-RS-r12
c2-Offset-r12
c2-ReportOnLeave-r12
Value/remark
1
2
FALSE
}
}
hysteresis
timeToTrigger
}
}
triggerQuantity
reportQuantity
maxReportCells
reportInterval
reportAmount
si-RequestForHO-r9
ue-RxTxTimeDiffPeriodical-r9
includeLocationInfo-r10
reportAddNeighMeas-r10
alternativeTimeToTrigger-r12
useT312-r12
usePSCell-r12
aN-Threshold1-v1250
a5-Threshold2-v1250
reportStrongestCSI-RSs-r12
reportCRS-Meas-r12
triggerQuantityCSI-RS-r12
0 (0 dB)
ms640
rsrp
sameAsTriggerQuantity
1
ms1024
r1
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
false
false
true
}
ETSI
Comment
The actual value is
IE value * 0.5 dB.
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
526
ETSI TS 136 508 V15.5.0 (2019-07)
ReportConfigEUTRA-PERIODICAL-CSI-RS
Table 4.6.6-12: ReportConfigEUTRA-PERIODICAL-CSI-RS
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigEUTRA-PERIODICAL ::= SEQUENCE {
triggerType CHOICE {
periodical SEQUENCE {
purpose
}
}
triggerQuantity
reportQuantity
maxReportCells
reportInterval
reportAmount
si-RequestForHO-r9
ue-RxTxTimeDiffPeriodical-r9
includeLocationInfo-r10
reportAddNeighMeas-r10
alternativeTimeToTrigger-r12
useT312-r12
usePSCell-r12
aN-Threshold1-v1250
a5-Threshold2-v1250
reportStrongestCSI-RSs-r12
reportCRS-Meas-r12
triggerQuantityCSI-RS-r12
}
-
Value/remark
Comment
Condition
Comment
Condition
reportStrongestCells
rsrp
both
1
ms1024
infinity
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
true
false
false
ReportConfigEUTRA-V1
Table 4.6.6-13: ReportConfigEUTRA-V1
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigEUTRA-V1 ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventV1-r14 SEQUENCE {
v1-Threshold-r14
}
}
hysteresis
timeToTrigger
}
}
triggerQuantity
reportQuantity
maxReportCells
reportInterval
reportAmount
purpose-v14xy
}
Value/remark
50
0 (0 dB)
ms0
rsrp
both
1
ms1024
r1
sidelink
ETSI
Not RSRQ
3GPP TS 36.508 version 15.5.0 Release 15
-
527
ETSI TS 136 508 V15.5.0 (2019-07)
ReportConfigEUTRA-V2
Table 4.6.6-14: ReportConfigEUTRA-V2
Derivation Path: 36.331 clause 6.3.5
Information Element
ReportConfigEUTRA-V2 ::= SEQUENCE {
triggerType CHOICE {
event SEQUENCE {
eventId CHOICE {
eventV2-r14 SEQUENCE {
v2-Threshold-r14
}
}
hysteresis
timeToTrigger
}
}
triggerQuantity
reportQuantity
maxReportCells
reportInterval
reportAmount
purpose-v14xy
}
4.6.7
–
Value/remark
Comment
Condition
10
0 (0 dB)
ms0
rsrp
both
1
ms1024
r1
sidelink
Not RSRQ
Other information elements
RRC-TransactionIdentifier-DL
Table 4.6.7-1: RRC-TransactionIdentifier-DL
Derivation Path: 36.331 clause 6.3.6
Information Element
RRC-TransactionIdentifier-DL ::=
–
Value/remark
Comment
Condition
Comment
The same value
as the value of
RRCTransactionIdentifi
er-DL in the
downlink message
initiating the
procedure
Condition
0..3
RRC-TransactionIdentifier-UL
Table 4.6.7-2: RRC-TransactionIdentifier-UL
Derivation Path: 36.331 clause 6.3.6
Information Element
RRC-TransactionIdentifier-UL ::=
4.6.8
Value/remark
0..3
Channel-bandwidth-dependent parameters
The default values of parameters which depend on the channel bandwidth are defined in table 4.6.8-1.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
528
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.6.8-1: Channel-bandwidth-dependent parameters
Information
Element
PrachFrequencyOff
set or prachFreqOffsetHig
hSpeed-r14
nRB-CQI
PuschHoppingOffset
sr-PUCCHResourceInde
x
srsBandwidthCo
nfig
4.7
Channel bandwidth
5 MHz
10 MHz
2
4
1.4 MHz
0
3 MHz
1
0
0
2
0
2
0
FFS
Comment
15 MHz
6
20MHz
8
4
6
8
4
8
12
16
10
20
41
62
84
FFS
bw3
(mSRS,b,
Nb) = (20,
1), (4, 5),
(4, 1), (4,
1)
bw2
(mSRS,b,
Nb) = (40,
1), (20, 2),
(4, 5), (4,
1)
bw2
(mSRS,b,
Nb) = (60,
1), (20, 3),
(4, 5), (4,
1)
bw2
(mSRS,b,
Nb) = (80,
1), (40, 2),
(20, 2), (4,
5)
Typical value in
real network
Selected based
on typical
maximum
number of UEs.
Typical value in
real network
Selected in
accordance with
pucchResourceSize.
Default NAS message and information element contents
This clause contains the default values of common NAS messages and information elements, which apply to all test
cases unless otherwise specified. All the messages and information elements are listed in alphabetical order.
4.7.1
Security protected NAS messages
In subclauses 4.7.2 and 4.7.3 in this document, all the NAS messages are described in the plain NAS message format.
When a NAS message is security protected, the message shall be contained by SECURITY PROTECTED NAS
MESSAGE unless contained by another NAS message.
The default contents of SECURITY PROTECTED NAS MESSAGE message are defined in table 4.7.1-1.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
529
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.7.1-1: SECURITY PROTECTED NAS MESSAGE
Derivation Path: 24.301 clause 8.2.23
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0001'B
'0010'B
'0011'B
'0100'B
'0101'B
Message authentication code
Sequence number
NAS message
Condition
UNCIPHERED
CIPHERED
UNCIPHERED-NEW
CIPHERED-NEW
CIPHERED-PARTIALLY
SENT-BY-SS
SENT-BY-UE
The calculated value of
MAC-I for this message.
The same value as the
XMAC-I value calculated
by SS.
The internal counter of
the SS
Any allowed value
Comment
Condition
Integrity protected
UNCIPHER
ED
CIPHERED
Integrity protected
and ciphered
Integrity protected
with new EPS
security context
Integrity protected
and ciphered with
new EPS security
context
Integrity protected
and partially
ciphered NAS
message
The value of
MAC-I is
calculated by SS
using Sequence
number sent by
UE.
UNCIPHER
ED-NEW
CIPHEREDNEW
CIPHEREDPARTIALLY
SENT-BYSS
SENT-BYUE
SENT-BYSS
SENT-BYUE
Set according to specific
message content
Explanation
This condition applies to unciphered NAS message exchange
This condition applies to ciphered NAS message exchange
This condition applies to unciphered NAS message exchange with
new EPS security context
This condition applies to ciphered NAS message exchange with new
EPS security context
This condition applies to partially ciphered NAS message exchange
Use for the message sent from SS to UE
Use for the message sent from UE to SS
When a valid NAS security context exists, unless specified otherwise in other clauses of the present specification or in a
test case, for every DL NAS message sent within SECURITY PROTECTED NAS MESSAGE message, the condition
CIPHERED applies.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
4.7.2
-
530
Contents of EMM messages
ATTACH ACCEPT
This message is sent by the SS to the UE.
Table 4.7.2-1: ATTACH ACCEPT
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 24.301 clause 8.2.1
Information Element
Protocol discriminator
Security header type
531
Value/remark
EMM
'0000'B
Attach accept message identity
EPS attach result
'0100 0010'B
'0001'B
'0010'B
Spare half octet
T3412 value
Timer value
Unit
'0000'B
TAI list
Length of tracking area identity list contents
Partial tracking area identity list 1
Number of elements
Type of list
'0 0000'B
'111'B
EPS_only
combined_E
PS_IMSI
value indicates
that the timer is
deactivated.
1 element
list of TACs
belonging to one
PLMN, with nonconsecutive TAC
values
For NAS test
cases, see table
6.3.2.2-1.
For NAS test
cases, see table
6.3.2.2-1.
For NAS test
cases, see table
6.3.2.2-1.
See table 4.4.2-2 in this
document
TAC 1
See table 4.4.2-2 in this
document
ACTIVATE DEFAULT
EPS BEARER
CONTEXT REQUEST
message to activate the
default bearer
ESM DUMMY
MESSAGE
'0000 1011'B
'110'B
'0'B
MCC
See table 4.4.2-2 in this
document
MNC
See table 4.4.2-2 in this
document
MME Group ID
See table 4.4.2-2 in this
document
MME Code
See table 4.4.2-2 in this
document
M-TMSI
See table 4.4.2-2 in this
document
Location area identification
Location area identification
Plain NAS
message, not
security protected
Attach accept
EPS only
combined
EPS/IMSI attach
'0 0000'B
'00'B
MNC
GUTI
Length of EPS mobile identity contents
Type of identity
Odd/even indication
Condition
6 octets
See table 4.4.2-2 in this
document
ESM message container
Comment
'0000 0110'B
MCC
ESM message container
ETSI TS 136 508 V15.5.0 (2019-07)
Not present
ETSI
CIoT_Attach
_WithoutPD
N
11 octets
GUTI
even number of
identity digits and
also when the
GUTI is used
For NAS test
cases, see table
6.3.2.2-1.
For NAS test
cases, see table
6.3.2.2-1.
For NAS test
cases, see table
6.3.2.2-1.
For NAS test
cases, see table
6.3.2.2-1.
For NAS test
cases, see table
6.3.2.2-1.
EPS_only
3GPP TS 36.508 version 15.5.0 Release 15
MCC
MNC
LAC
MS identity
MS identity
Length of mobile identity contents
Type of identity
Odd/even indication
532
ETSI TS 136 508 V15.5.0 (2019-07)
MCC of the EUTRA cell
from which this message
is sent
MCC of the EUTRA cell
from which this message
is sent
1
Not present
'0000 0101'B
'100'B
'0'B
TMSI
EMM cause
T3402 value
T3423 value
Equivalent PLMNs
Emergency number list
EPS network feature support
TMSI-1
Not present
Not present
Not present
Not present
Not present
'0000 0001'B
EPS network feature support
'0000 0011'B
EPS network feature support
‘1000 0011 0000 1111’B
EPS network feature support
‘1100 0000 0000 1100’B
EPS network feature support
‘1000 0000 0000 1011’B
EPS network feature support
‘1000 0000 0000 1010’B
ETSI
combined_E
PS_IMSI
5 octets
TMSI/P-TMSI/MTMSI
even number of
identity digits and
also when the
TMSI/P-TMSI or
TMGI and optional
MBMS Session
Identity is used
IMS voice over PS
session in S1
mode supported
IMS voice over PS
session in S1
mode supported,
emergency bearer
services in S1
mode supported
IMS voice over PS
session in S1
mode, emergency
bearer services in
S1 mode, CP
CIoT, ePCO, HCCP CIoT, S1-U
data and UP CIoT
supported
CIoT control plane
optimization
indicated, Attach
Without PDN
supported, ePCO
supported,
Header
Compression for
CIoT control plane
supported
CP CIoT
supported, ePCO
supported, S1-U
data transfer
supported, CIoT
user plane
optimization
indicated
CP CIoT
supported, ePCO
supported, S1-U
data transfer only
indicated
EPS_only
combined_E
PS_IMSI
Rel-9
CIoT
CIoT_CP
AND pc_NB
CIoT_UP
AND pc_NB
S1-U Only
AND pc_NB
3GPP TS 36.508 version 15.5.0 Release 15
EPS network feature support
‘0010 0000 0000 0000’B
Additional update result
Additional update result
Not present
‘0010’ B
T3412 extended value
Extended DRX parameters
Not present
Not present
Condition
combined_EPS_IMSI
additional_update_result_SMS
CIoT_Attach_WithoutPDN
CIoT_CP
CIoT_SMSOnly
CIoT_UP
S1-U data Only
CIoT
EXTENDED
SERVICE
REQUEST for
packet services
indicated
ESRPS
“SMS only”
additional_u
pdate_result
_SMS OR
CIoT_SMSO
nly
Rel-10
Note 1: This condition is only applicable for E-UTRA UEs (TS 36.5232 A.4.1-1/1 or A.4.1-1/2).
If the test case requires the network to indicate support of EXTENDED
SERVICE REQUEST for packet services (ESRPS)
ESRPS
NOTE:
ETSI TS 136 508 V15.5.0 (2019-07)
Explanation
This condition applies if the UE is configured to initiate EPS attach or
if explicitly specified.
This condition applies if the UE is configured to initiate combined
EPS/IMSI attach or if explicitly specified. This condition does not
apply for NB-S1.
If the UE requested “SMS only” in the Additional update type IE and
combined_EPS_IMSI condition applies
If the UE wants to attach without PDN for CIoT optimization
If test case requires control plane CIoT optimization
If SMS Only is indicated in the ATTACH REQ received earlier
If test case requires user plane CIoT optimization
If S1-U data transfer Only is indicated
If in the last ATTACH REQUEST, the UE network capability was
included with the “CP CIoT” (octet 8, bit 3) or the “UP CIoT” and “S1-U
data” (octet 8, bit 4 and bit 5).
EPS_only
-
533
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ATTACH COMPLETE
This message is sent by the UE to the SS.
Table 4.7.2-2: ATTACH COMPLETE
Derivation Path: 24.301 clause 8.2.2
Information Element
Protocol discriminator
Security header type
Attach complete message identity
ESM message container
ESM message container
Condition
CIoT_Attach_WithoutPDN
Value/remark
EMM
'0000'B
'0100 0011'B
ACTIVATE DEFAULT
EPS BEARER
CONTEXT ACCEPT
message
ESM DUMMY
MESSAGE
Comment
Plain NAS
message, not
security protected
Attach complete
Explanation
If the UE wants to attach without PDN for CIoT optimization
ETSI
Condition
CIoT_Attach
_WithoutPD
N
3GPP TS 36.508 version 15.5.0 Release 15
NOTE:
-
534
ETSI TS 136 508 V15.5.0 (2019-07)
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ATTACH REJECT
This message is sent by the SS to the UE.
Table 4.7.2-3: ATTACH REJECT
Derivation Path: 24.301 clause 8.2.3
Information Element
Protocol discriminator
Security header type
Attach reject message identity
EMM cause
ESM message container
NOTE:
Value/remark
EMM
'0000'B
'0100 0100'B
Set according to specific
message content.
Set according to specific
message content.
Comment
Condition
Plain NAS
message, not
security protected
Attach reject
If this message includes the EMM cause set to #3, #6, #7, #8, #11, #12, #13, #14, #15, #25 or #35, it is
sent within SECURITY PROTECTED NAS MESSAGE message. Otherwise this message is sent without
integrity protection.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
535
ATTACH REQUEST
This message is sent by the UE to the SS.
Table 4.7.2-4: ATTACH REQUEST
ETSI
ETSI TS 136 508 V15.5.0 (2019-07)
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 24.301 clause 8.2.4
Information Element
Protocol discriminator
Security header type
536
Value/remark
EMM
'0000'B
Attach request message identity
EPS attach type
'0100 0001'B
'0001'B
'0010'B
NAS key set identifier
Old GUTI or IMSI
UE network capability
UE network capability
All octets with the exception of octet 9, bit 5
Dual connectivity with NR (DCNR) (octet 9, bit 5)
Any allowed value
Any allowed value
Any allowed value
ESM message container
PDN CONNECTIVITY
REQUEST message to
request PDN connectivity
to the default PDN
ESM DUMMY
MESSAGE
ESM message container
Old P-TMSI signature
Additional GUTI
Last visited registered TAI
DRX parameter
MS network capability
Old location area identification
TMSI status
Mobile station classmark 2
Mobile station classmark 3
Supported Codecs
Additional update type
Additional update type
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present
Any allowed value
Not present or any
allowed value
Voice domain preference and UE's usage setting
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Old GUTI type
MS network feature support
TMSI based NRI container
T3324 value
T3412 extended value
Extended DRX parameters
Comment
Condition
Plain NAS
message, not
security protected
Attach request
EPS attach
combined
EPS/IMSI attach
EPS_only
combined_E
PS_IMSI
EN-DC
Any allowed value
1
Additional update type
Device properties
ETSI TS 136 508 V15.5.0 (2019-07)
ETSI
dual connectivity
with NR supported
CIoT_Attach
_WithoutPD
N
EPS_only
EPS_only_w
ith_SMS
combined_E
PS_IMSI or
CIoT
3GPP TS 36.508 version 15.5.0 Release 15
537
ETSI TS 136 508 V15.5.0 (2019-07)
UE additional security capability
Any allowed value
EN-DC
(NOTE 1, NOTE 2)
NOTE 1: For a UE supporting dual connectivity with NR, if the UE supports one of the encryption algorithms for 5GS in
bits 8 to 5 of octet 3, it shall support the same algorithms for E-UTRAN as specified in 3GPP TS 33.401 [41].
NOTE 2: For a UE supporting dual connectivity with NR, if the UE supports one of the integrity protection algorithms
for 5GS in bits 8 to 5 of octet 5, it shall support the same algorithms for E-UTRAN as specified in 3GPP TS
33.401 [41].
Condition
EPS_only
combined_EPS_IMSI
CIoT_Attach_WithoutPDN
EPS_only_with_SMS
Explanation
See the definition below table 4.7.2-1.
See the definition below table 4.7.2-1.
If the UE wants to attach without PDN for CIoT optimization
If the UE wants to perform EPS attach with SMS only for CIoT
optimization
If UE supports CIoT Optimisation
If the UE supports E-UTRA-NR dual connectivity ([71] pc_EN_DC)
CIoT
EN-DC
NOTE:
-
This message is sent integrity protected when a valid security context exists and without integrity
protection otherwise.
AUTHENTICATION FAILURE
This message is sent by the UE to the SS.
Table 4.7.2-5: AUTHENTICATION FAILURE
Derivation Path: 24.301 clause 8.2.5
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Authentication failure message type
'0101 1100'B
EMM cause
Authentication failure parameter
'0001 0100'B
Not present
NOTE:
-
Comment
Condition
Plain NAS
message, not
security protected
Authentication
failure
Mac failure
See TS 24.301
[28] subclause
8.2.5.2
The security protection of this message is the same as the previous AUTHENTICATION REQUEST
message.
AUTHENTICATION REJECT
This message is sent by the SS to the UE.
Table 4.7.2-6: AUTHENTICATION REJECT
Derivation Path: 24.301 clause 8.2.6
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Authentication reject message type
'0101 0100'B
NOTE:
This message is sent without integrity protection.
ETSI
Comment
Plain NAS
message, not
security protected
Authentication
reject
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
538
ETSI TS 136 508 V15.5.0 (2019-07)
AUTHENTICATION REQUEST
This message is sent by the SS to the UE.
Table 4.7.2-7: AUTHENTICATION REQUEST
Derivation Path: 24.301 clause 8.2.7
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Authentication request message type
'0101 0010'B
NAS key set identifierASME
NAS key set identifier
An arbitrarily selected
value between '000'B and
'110'B, different from the
valid NAS key set
identifier of the UE if
such a value exists.
'0'B
TSC
Spare half octet
Authentication parameter RAND (EPS challenge)
Authentication parameter AUTN (EPS challenge)
NOTE:
-
Comment
Condition
Plain NAS
message, not
security protected
Authentication
request
native security
context (for
KSIASME)
'0000'B
An arbitrarily selected
128 bits value
See TS 24.301 [28]
subclause 9.9.3.2
Within a test execution this message is sent without integrity protection before NAS security mode
control procedure has been successfully completed; and sent integrity protected and ciphered within
SECURITY PROTECTED NAS MESSAGE message after NAS security mode control procedure has
been successfully completed. SS does not maintain information for NAS security mode control procedure
after a TC is completed.
AUTHENTICATION RESPONSE
This message is sent by the UE to the SS.
Table 4.7.2-8: AUTHENTICATION RESPONSE
Derivation Path: 24.301 clause 8.2.8
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Authentication response message type
'0101 0011'B
Authentication response parameter
See TS 24.301 [28]
subclause 9.9.3.4
NOTE:
Comment
Condition
Plain NAS
message, not
security protected
Authentication
response
When sent in response to an AUTHENTICATION REQUEST message which is not integrity protected
and not ciphered, the AUTHENTICATION RESPONSE message may be sent integrity protected when a
valid security context exists and without integrity protection otherwise.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
539
ETSI TS 136 508 V15.5.0 (2019-07)
CS SERVICE NOTIFICATION
This message is sent by the SS to the UE.
Table 4.7.2-8A: CS SERVICE NOTIFICATION
Derivation Path: 24.301 clause 8.2.9
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
CS service notification message identity
'01100100'B
Paging identity
CLI
SS Code
LCS indicator
LCS client identity
‘1’B
Not present
Not present
Not present
Not present
NOTE:
-
Comment
Condition
Plain NAS
message, not
security protected
CS Service
notification
TMSI
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
CONTROL PLANE SERVICE REQUEST
This message is sent by the UE to the SS.
Table 4.7.2-28: CONTROL PLANE SERVICE REQUEST
Derivation Path: 24.301 clause 8.2.33
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Control plane service request message identity
'0100 1101'B
Data service type
Data service type value
"Active" flag
Any allowed value
'0'B
NAS key set identifier
NAS key set identifier
TSC
ESM message container
NAS message container
EPS bearer context status
Device properties
The valid NAS key set
identifier of the UE
'0'B
Not present or PDN
CONNECTIVITY
REQUEST message to
request PDN connectivity
to the default PDN
Not present or set
according to specific
message content
Not present or (octet 3 =
'00100000'B and octet 4
= '00000000'B)
Not present or Any
allowed value
ETSI
Comment
Plain NAS
message, not
security protected
Control plane
service request
No radio bearer
establishment
requested
native security
context (for
KSIASME)
Condition
3GPP TS 36.508 version 15.5.0 Release 15
NOTE:
-
540
ETSI TS 136 508 V15.5.0 (2019-07)
This message is always sent within SECURITY PROTECTED NAS MESSAGE message as an integrity
protected message. If the ESM Message Container or NAS message container is present, this element is
ciphered - so the whole message is then integrity protected and partially ciphered.
DETACH ACCEPT (UE originating detach)
This message is sent by the SS to the UE.
Table 4.7.2-9: DETACH ACCEPT
Derivation Path: 24.301 clause 8.2.10.1
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Detach accept message identity
'0100 0110'B
NOTE:
-
Comment
Condition
Plain NAS
message, not
security protected
Detach accept
This message is sent using the same security protection as in the previous DETACH REQUEST message
received from the UE.
DETACH ACCEPT (UE terminated detach)
This message is sent by the UE to the SS.
Table 4.7.2-10: DETACH ACCEPT
Derivation Path: 24.301 clause 8.2.10.2
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Detach accept message identity
'0100 0110'B
NOTE:
Comment
Condition
Plain NAS
message, not
security protected
Detach accept
This message is sent without integrity protection before NAS security mode control procedure has been
successfully completed and sent within SECURITY PROTECTED NAS MESSAGE message after NAS
security mode control procedure has been successfully completed.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
541
ETSI TS 136 508 V15.5.0 (2019-07)
DETACH REQUEST (UE originating detach)
This message is sent by the UE to the SS.
Table 4.7.2-11: DETACH REQUEST
Derivation Path: 24.301 clause 8.2.11.1
Information Element
Protocol discriminator
Security header type
Detach request message identity
Detach type
Type of detach
'0100 0101'B
'001'B
‘011’B
Switch off
NAS key set identifier
NAS key set identifier
'1'B
Comment
Condition
Plain NAS
message, not
security protected
Detach request
EPS detach
combined
EPS/IMSI detach
switch off
EPS_only
Combined_
EPS_IMSI
The valid NAS key set
identifier.
Any Value
If the UE has a valid
GUTI, set to the GUTI,
otherwise set to the IMSI
of the UE.
TSC
GUTI or IMSI
Condition
EPS_only
Combined_EPS_IMSI
NOTE:
Value/remark
EMM
'0000'B
Explanation
See the definition below table 4.7.2-1.
See the definition below table 4.7.2-1.
This message is sent with integrity protection before SS has started the ciphering and integrity and
ciphered protected after SS has started the ciphering.
-
DETACH REQUEST (UE terminated detach)
This message is sent by the SS to the UE.
Table 4.7.2-12: DETACH REQUEST
Derivation Path: 24.301 clause 8.2.11.2
Information Element
Protocol discriminator
Security header type
Detach request message identity
Detach type
Spare half octet
EMM cause
NOTE:
Value/remark
EMM
'0000'B
'0100 0101'B
Set according to specific
message content.
'0000'B
Set according to specific
message content.
Comment
Plain NAS
message, not
security protected
Detach request
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
542
ETSI TS 136 508 V15.5.0 (2019-07)
DOWNLINK NAS TRANSPORT
This message is sent by the SS to the UE.
Table 4.7.2-12A: DOWNLINK NAS TRANSPORT
Derivation Path: 24.301 clause 8.2.12
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Downlink NAS transport message identity
'0110 0010'B
NAS message container
Set according to specific
message content
NOTE:
Comment
Condition
Plain NAS
message, not
security protected
Downlink NAS
transport
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
-
EMM INFORMATION
This message is sent by the SS to the UE.
Table 4.7.2-13: EMM INFORMATION
Derivation Path: 24.301 clause 8.2.13
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
EMM information message identity
Full name for network
'0110 0001'B
Set according to specific
message content.
Set according to specific
message content.
Set according to specific
message content.
Set according to specific
message content.
Set according to specific
message content.
Short name for network
Local time zone
Universal time and local time zone
Network daylight saving time
NOTE:
-
Comment
Condition
Plain NAS
message, not
security protected
EMM information
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
EMM STATUS
This message is sent by the UE or by the SS.
Table 4.7.2-14: EMM STATUS
Derivation Path: 24.301 clause 8.2.14
Information Element
Protocol discriminator
Security header type
EMM status message identity
EMM cause
NOTE:
Value/remark
EMM
'0000'B
'0110 0000'B
Set according to specific
message content.
Comment
Plain NAS
message, not
security protected
EMM status
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
543
ETSI TS 136 508 V15.5.0 (2019-07)
EXTENDED SERVICE REQUEST
This message is sent by the UE to the SS.
Table 4.7.2-14A: EXTENDED SERVICE REQUEST
Derivation Path: 24.301 clause 8.2.15
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Extended service request message identity
'0100 1100'B
Service type
'0001'B
NAS key set identifier
NAS key set identifier
The valid NAS key set
identifier.
'0'B
TSC
M-TMSI
If the UE has a valid MTMSI, set to the M-TMSI,
otherwise set to the IMSI
of the UE.
’001’B
CSFB response
NOTE:
-
Comment
Condition
Plain NAS
message, not
security protected
Extended service
request
mobile terminating
CS fallback or
1xCS fallback
native security
context (for
KSIASME)
CS fallback
accepted by the
UE
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
GUTI REALLOCATION COMMAND
This message is sent by the SS to the UE.
Table 4.7.2-15: GUTI REALLOCATION COMMAND
Derivation Path: 24.301 clause 8.2.16
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
GUTI reallocation command message identity
'0101 0000'B
GUTI
Set according to specific
message content.
Set according to specific
message content.
TAI list
NOTE:
Comment
Plain NAS
message, not
security protected
GUTI reallocation
command
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
544
ETSI TS 136 508 V15.5.0 (2019-07)
GUTI REALLOCATION COMPLETE
This message is sent by the UE to the SS.
Table 4.7.2-16: GUTI REALLOCATION COMPLETE
Derivation Path: 24.301 clause 8.2.17
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
GUTI reallocation complete message identity
'0101 0001'B
NOTE:
-
Comment
Condition
Plain NAS
message, not
security protected
GUTI reallocation
complete
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
IDENTITY REQUEST
This message is sent by the SS to the UE.
Table 4.7.2-17: IDENTITY REQUEST
Derivation Path: 24.301 clause 8.2.18
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Identity request message identity
Identity type
Spare half octet
'0101 0101'B
'0001'B
'0000'B
NOTE:
-
Comment
Condition
Plain NAS
message, not
security protected
Identity request
IMSI
This message is sent without integrity protection before NAS security mode control procedure has been
successfully completed and sent within SECURITY PROTECTED NAS MESSAGE message after NAS
security mode control procedure has been successfully completed.
IDENTITY RESPONSE
This message is sent by the UE to the SS.
Table 4.7.2-18: IDENTITY RESPONSE
Derivation Path: 24.301 clause 8.2.19
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Identity response message
Mobile identity
'0101 0110'B
IMSI of the UE
NOTE:
Comment
Condition
Plain NAS
message, not
security protected
Identity response
This message is sent without integrity protection before NAS security mode control procedure has been
successfully completed and sent within SECURITY PROTECTED NAS MESSAGE message after NAS
security mode control procedure has been successfully completed.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
545
ETSI TS 136 508 V15.5.0 (2019-07)
SECURITY MODE COMMAND
This message is sent by the SS to the UE.
Table 4.7.2-19: SECURITY MODE COMMAND
Derivation Path: 24.301 clause 8.2.20
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Security mode command message identity
'0101 1101'B
Selected NAS security algorithms
Type of integrity protection algorithm
Set according to PIXIT
parameter for default
integrity protection
algorithm
0(reserved or eia0)
eia1
eia2
Type of ciphering algorithm
NAS key set identifier
NAS key set identifier
TSC
Spare half octet
Replayed UE security capabilities
IMEISV request
Replayed nonceUE
NonceMME
HashMME
Replayed UE additional security capability
Comment
Plain NAS
message, not
security protected
Security mode
command
For SIG
This IE is set to
one of the
algorithms
supported by the
UE as indicated in
the IE "UE
network
capability" in the
ATTACH
REQUEST
message.
Set according to PIXIT
parameter for default
ciphering algorithm
eea0
The valid NAS key set
identifier.
'0'B
Condition
For RF
For SIG
For RF
native security
context (for
KSIASME)
'0000'B
Set according to the
received UE security
capabilities
Not present
Not present
Not present
Not present
Set to the value received
in the Attach/TAU
Request
ENDC_duringR
egistration
Condition
Explanation
For SIG
Used for signalling test cases
For RF
Used for RF/RRM test cases
EN-DC_duringRegistration If the UE supports E-UTRA-NR dual connectivity NR ([71] pc_EN_DC) and this message
is sent during an Attach or TAU procedure
NOTE:
This message is always sent integrity protected with new EPS security context.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
546
ETSI TS 136 508 V15.5.0 (2019-07)
SECURITY MODE COMPLETE
This message is sent by the UE to the SS.
Table 4.7.2-20: SECURITY MODE COMPLETE
Derivation Path: 24.301 clause 8.2.21
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Security mode complete message identity
'0101 1110'B
IMEISV
Not present
NOTE:
-
Comment
Condition
Plain NAS
message, not
security protected
Security mode
complete
This message is always sent within SECURITY PROTECTED NAS MESSAGE message with new EPS
security context.
SECURITY MODE REJECT
This message is sent by the UE to the SS.
Table 4.7.2-21: SECURITY MODE REJECT
Derivation Path: 24.301 clause 8.2.22
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Security mode reject message identity
'0101 1111'B
EMM cause
The value is set
according to specific
message content.
NOTE:
-
Comment
Condition
Plain NAS
message, not
security protected
Security mode
reject
This message is sent without integrity protection before NAS security mode control procedure has been
successfully completed and sent within SECURITY PROTECTED NAS MESSAGE message after NAS
security mode control procedure has been successfully completed.
SERVICE ACCEPT
This message is sent by the SS to the UE.
Table 4.7.2-21A: SERVICE ACCEPT
Derivation Path: 24.301 clause 8.2.34
Information Element
Protocol discriminator
Security header type
Service accept message identity
EPS bearer context status
NOTE:
Value/remark
EMM
'0000'B
'0100 1111'B
The same value as the
value set in CONTROL
PLANE SERVICE
REQUEST
Comment
Plain NAS
message, not
security protected
Service accept
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
547
ETSI TS 136 508 V15.5.0 (2019-07)
SERVICE REJECT
This message is sent by the SS to the UE.
Table 4.7.2-22: SERVICE REJECT
Derivation Path: 24.301 clause 8.2.24
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Service reject message identity
EMM cause
'0100 1110'B
Set according to specific
message content.
Not present
T3442 value
NOTE:
-
Comment
Condition
Plain NAS
message, not
security protected
Service reject
If this message includes the EMM cause set to #3, #6, #7, #8, #11, #12, #13, #14, #15, #25 or #35, it is
sent within SECURITY PROTECTED NAS MESSAGE message. Otherwise this message is sent without
integrity protection.
SERVICE REQUEST
This message is sent by the UE to the SS.
Table 4.7.2-23: SERVICE REQUEST
Derivation Path: 24.301 clause 8.2.25
Information Element
Protocol discriminator
Security header type
KSI and sequence number
Sequence number (short)
KSI
Message authentication code (short)
Value/remark
EMM
'1100'B
The 5 least significant
bits of the NAS COUNT
value applicable when
this message is sent for
sequence number.
The effective KSI value.
The 2 least significant
octets of the resulting
message authentication
code
ETSI
Comment
Security header
for the SERVICE
REQUEST
message
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
548
ETSI TS 136 508 V15.5.0 (2019-07)
TRACKING AREA UPDATE ACCEPT
This message is sent by the SS to the UE.
Table 4.7.2-24: TRACKING AREA UPDATE ACCEPT
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
549
Derivation Path: 24.301 clause 8.2.26
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Tracking area update accept message identity
'0100 1001'B
EPS update result
'0000'B
'0001'B
Spare half octet
T3412 value
T3412 value
Timer value
Unit
'0000'B
Not present
GUTI
Length of EPS mobile identity contents
Type of identity
Odd/even indication
'0 0000'B
'111'B
'0000 1011'B
'110'B
'0'B
MCC
See table 4.4.2-2 in this
document
MNC
See table 4.4.2-2 in this
document
MME Group ID
See table 4.4.2-2 in this
document
MME Code
See table 4.4.2-2 in this
document
M-TMSI
See table 4.4.2-2 in this
document
TAI list
Length of tracking area identity list contents
Partial tracking area identity list 1
Number of elements
Type of list
Condition
Plain NAS
message, not
security protected
Tracking area
update accept
TA updated
combined TA/LA
updated
TA_only
combined_T
A_LA
Periodic
value indicates
that the timer is
deactivated.
11 octets
GUTI
even number of
identity digits and
also when the
GUTI is used
For NAS test
cases, see table
6.3.2.2-1.
For NAS test
cases, see table
6.3.2.2-1.
For NAS test
cases, see table
6.3.2.2-1.
For NAS test
cases, see table
6.3.2.2-1.
For NAS test
cases, see table
6.3.2.2-1.
6 octets
'0 0000'B
'00'B
1 element
list of TACs
belonging to one
PLMN, with nonconsecutive TAC
values
For NAS test
cases, see table
6.3.2.2-1.
For NAS test
cases, see table
6.3.2.2-1.
For NAS test
cases, see table
6.3.2.2-1.
See table 4.4.2-2 in this
document
MNC
See table 4.4.2-2 in this
document
TAC 1
See table 4.4.2-2 in this
document
Location area identification
Location area identification
MCC
Comment
'0000 0110'B
MCC
EPS bearer context status
ETSI TS 136 508 V15.5.0 (2019-07)
The same value as the
value set in TRACKING
AREA UPDATE
REQUEST message
Not present
MCC of the EUTRA cell
from which this message
is sent
ETSI
TA_only
combined_T
A_LA
3GPP TS 36.508 version 15.5.0 Release 15
MNC
LAC
MS identity
MS identity
Length of mobile identity contents
Type of identity
Odd/even indication
550
ETSI TS 136 508 V15.5.0 (2019-07)
MCC of the EUTRA cell
from which this message
is sent
1
Not present
'0000 0101'B
'100'B
5 octets
TMSI/P-TMSI/MTMSI
even number of
identity digits and
also when the
TMSI/P-TMSI or
TMGI and optional
MBMS Session
Identity is used
'0'B
TMSI
EMM cause
T3402 value
T3423 value
Equivalent PLMNs
Emergency number list
EPS network feature support
TMSI-1
Not present
Not present
Not present
Not present
Not present
0000 0001'B
EPS network feature support
‘1100 0000 0000 1100’B
EPS network feature support
‘1000 0000 0000 1011’B
EPS network feature support
‘1000 0000 0000 1010’B
Additional update result
Additional update result
Not present
‘0010’ B
T3412 extended value
Extended DRX parameters
Header compression configuration status
Not present
Not present
Not present or set
according to specific
message content
Condition
“SMS only”
Explanation
ETSI
IMS voice over PS
session in S1
mode supported
CIoT control plane
optimization
indicated, Attach
Without PDN
supported, ePCO
supported,
Header
Compression for
CIoT control plane
supported
CP CIoT
supported, ePCO
supported, S1-U
data transfer
supported, CIoT
user plane
optimization
indicated
CP CIoT
supported, ePCO
supported, S1-U
data transfer Only
indicated
TA_only
combined_T
A_LA
(CIoT_CP
OR
CIoT_CP_S
MSOnly)
AND pc_NB
CIoT_UP
AND pc_NB
S1-U Only
AND pc_NB
TAU_additio
nal_update_
result_SMS
OR
CIoT_CP_S
MSOnly
Rel-10
3GPP TS 36.508 version 15.5.0 Release 15
TA_only
combined_TA_LA
Periodic
TAU_additional_update_result_SMS
CIoT_CP
CIoT_CP_SMSOnly
CIoT_UP
S1-U data Only
NOTE:
-
551
ETSI TS 136 508 V15.5.0 (2019-07)
This condition applies if the UE is configured to initiate EPS attach or
if explicitly specified.
This condition applies if the UE is configured to initiate combined
EPS/IMSI attach or if explicitly specified. This condition does not apply
for NB-S1.
This condition applies if in the last TRACKING AREA UPDATE
REQUEST sent prior to this message, the EPS update type Value =
'011'B (periodic updating).
If the UE requested "SMS only" in the Additional update type IE and
combined_TA_LA.
If test case requires control plane CIoT optimization
If test case requires control plane CIoT optimization and SMS Only is
indicated
If test case requires user plane CIoT optimization
If S1-U data transfer Only is indicated
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
TRACKING AREA UPDATE COMPLETE
This message is sent by the UE to the SS.
Table 4.7.2-25: TRACKING AREA UPDATE COMPLETE
Derivation Path: 24.301 clause 8.2.27
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Tracking area update complete message identity
'0100 1010'B
NOTE:
-
Comment
Condition
Plain NAS
message, not
security protected
Tracking area
update complete
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
TRACKING AREA UPDATE REJECT
This message is sent by the SS to the UE.
Table 4.7.2-26: TRACKING AREA UPDATE REJECT
Derivation Path: 24.301 clause 8.2.28
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Tracking area update reject message identity
'0100 1011'B
EMM cause
Set according to specific
message content.
NOTE:
Comment
Condition
Plain NAS
message, not
security protected
Tracking area
update reject
If this message includes the EMM cause set to #3, #6, #7, #8, #11, #12, #13, #14, #15, #25 or #35, it is
sent within SECURITY PROTECTED NAS MESSAGE message. Otherwise this message is sent without
integrity protection.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
552
ETSI TS 136 508 V15.5.0 (2019-07)
TRACKING AREA UPDATE REQUEST
This message is sent by the UE to the SS.
Table 4.7.2-27: TRACKING AREA UPDATE REQUEST
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
553
Derivation Path: 24.301 clause 8.2.29
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Tracking area update request message identity
'0100 1000'B
EPS update type
EPS update type Value
"Active" flag
NAS key set identifier
NAS key set identifier
TSC
Old GUTI
Non-current native NAS key set identifier
GPRS ciphering key sequence number
Old P-TMSI signature
Additional GUTI
NonceUE
UE network capability
UE network capability
All octets with the exception of octet 9, bit 5
Dual connectivity with NR (DCNR) (octet 9, bit 5)
Last visited registered TAI
DRX parameter
UE radio capability information update needed
EPS bearer context status
MS network capability
Old location area identification
TMSI status
Mobile station classmark 2
Mobile station classmark 3
Supported Codecs
Additional update type
Additional update type
Additional update type
Additional update type
Voice domain preference and UE's usage setting
Old GUTI type
Device properties
'000'B
'001'B
'0'B
The valid NAS key set
identifier of the UE
'0'B
ETSI TS 136 508 V15.5.0 (2019-07)
Comment
Condition
Plain NAS
message, not
security protected
Tracking area
update request
TA updating
Combined TA/LA
updating
No bearer
establishment
requested
TA_only
combined_T
A_LA
native security
context (for
KSIASME)
Any allowed value
Not present
Not present
Not present
Not present
Not present
Not present or any
allowed value
EN-DC
Any allowed value
1
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or (octet 3 =
'00100000'B and octet 4
= '00000000'B)
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present
Not present or any
allowed value
Any allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
ETSI
dual connectivity
with NR supported
TA_only
combined_T
A_LA
TA_only_wit
h_SMS
CIoT
3GPP TS 36.508 version 15.5.0 Release 15
554
ETSI TS 136 508 V15.5.0 (2019-07)
MS network feature support
Not present or any
allowed value
TMSI based NRI container
Not present or any
allowed value
T3324 value
Not present or any
allowed value
T3412 extended value
Not present or any
allowed value
Extended DRX parameters
Not present or any
allowed value
UE additional security capability
Any allowed value
EN-DC
(NOTE 1, NOTE 2)
NOTE 1: For a UE supporting dual connectivity with NR, if the UE supports one of the encryption algorithms for 5GS in
bits 8 to 5 of octet 3, it shall support the same algorithms for E-UTRAN as specified in 3GPP TS 33.401 [41].
NOTE 2: For a UE supporting dual connectivity with NR, if the UE supports one of the integrity protection algorithms
for 5GS in bits 8 to 5 of octet 5, it shall support the same algorithms for E-UTRAN as specified in 3GPP TS
33.401 [41].
Condition
TA_only
combined_TA_LA
EPS_only_with_SMS
Explanation
See the definition below table 4.7.2-24.
See the definition below table 4.7.2-24.
If the UE wants to update for EPS attach with SMS only for CIoT
optimization
If UE supports CIoT Optimisation
If the UE supports E-UTRA-NR dual connectivity ([71] pc_EN_DC)
CIoT
EN-DC
NOTE:
-
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
UPLINK NAS TRANSPORT
This message is sent by the UE to the SS.
Table 4.7.2-27A: UPLINK NAS TRANSPORT
Derivation Path: 24.301 clause 8.2.30
Information Element
Protocol discriminator
Security header type
Value/remark
EMM
'0000'B
Uplink NAS transport message identity
'0100 0011'B
NAS message container
Set according to specific
message content
NOTE:
Comment
Plain NAS
message, not
security protected
Uplink NAS
transport
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
4.7.3
-
555
ETSI TS 136 508 V15.5.0 (2019-07)
Contents of ESM messages
ACTIVATE DEDICATED EPS BEARER CONTEXT ACCEPT
This message is sent by the UE to the SS.
Table 4.7.3-1: ACTIVATE DEDICATED EPS BEARER CONTEXT ACCEPT
Derivation Path: 24.301 clause 8.3.1
Information Element
Protocol discriminator
EPS bearer identity
Procedure transaction identity
Value/remark
ESM
The same value as the
value set in ACTIVATE
DEDICATED EPS
BEARER CONTEXT
REQUEST message
'0000 0000'B
Activate dedicated EPS bearer context accept
message identity
'1100 0110'B
Protocol configuration options
Not present or any
allowed value
Protocol configuration options
Not present
NBIFOM container
Not present or any
allowed value
Not present or any
allowed value
Extended protocol configuration options
NOTE:
Comment
No procedure
transaction
identity assigned
Activate dedicated
EPS bearer
context accept
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ETSI
Condition
NOT
(pc_NB or
pc_NonIP_P
DN)
pc_NB or
pc_NonIP_P
DN
3GPP TS 36.508 version 15.5.0 Release 15
-
556
ETSI TS 136 508 V15.5.0 (2019-07)
ACTIVATE DEDICATED EPS BEARER CONTEXT REJECT
This message is sent by UE to the SS.
Table 4.7.3-2: ACTIVATE DEDICATED EPS BEARER CONTEXT REJECT
Derivation Path: 24.301 clause 8.3.2
Information Element
Protocol discriminator
EPS bearer identity
Procedure transaction identity
Value/remark
ESM
The same value as the
value set in ACTIVATE
DEDICATED EPS
BEARER CONTEXT
REQUEST message.
'0000 0000'B
Activate dedicated EPS bearer context reject
message identity
'1100 0111'B
ESM cause
The value is set
according to specific
message content.
Not present
Not present or any
allowed value
Not present or any
allowed value
Protocol configuration options
NBIFOM container
Extended protocol configuration options
NOTE:
Comment
No procedure
transaction
identity assigned
Activate dedicated
EPS bearer
context reject
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
557
ETSI TS 136 508 V15.5.0 (2019-07)
ACTIVATE DEDICATED EPS BEARER CONTEXT REQUEST
This message is sent by the SS to the UE.
Table 4.7.3-3: ACTIVATE DEDICATED EPS BEARER CONTEXT REQUEST
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 24.301 clause 8.3.3
Information Element
Protocol discriminator
EPS bearer identity
Procedure transaction identity
Activate dedicated EPS bearer context request
message identity
Linked EPS bearer identity
Spare half octet
EPS QoS
TFT
Transaction identifier
Negotiated QoS
Negotiated LLC SAPI
Radio priority
Packet flow Identifier
Protocol configuration options
558
ETSI TS 136 508 V15.5.0 (2019-07)
Value/remark
ESM
Arbitrarily selected value
between '0101'B and
'1111'B.
'0000 0000'B
The same value as the
value set in BEARER
RESOURCE
MODIFICATION
REQUEST message or
BEARER RESOURCE
ALLOCATION
REQUEST message
'1100 0101'B
The EPS bearer identity
of the associated default
bearer
'0000'B
See Reference dedicated
EPS bearer context #1 in
table 6.6.2-1
See Reference dedicated
EPS bearer context #1 in
table 6.6.2-1
Not present
Distinct value between 0
and 127 calculated on
basis of the EPS bearer
identity.
See Reference dedicated
EPS bearer context #1 in
table 6.6.2-1
See Reference dedicated
EPS bearer context #1 in
table 6.6.2-1
See Reference dedicated
EPS bearer context #1 in
table 6.6.2-1
Not present
'0000 0000'B
See Reference dedicated
EPS bearer context #1 in
table 6.6.2-1
Protocol configuration options
Not present
WLAN offload container
NBIFOM container
Extended protocol configuration options
Not present
Not present
Not present
Extended protocol configuration options
See Reference dedicated
EPS bearer context #1 in
table 6.6.2-1
Condition
Explanation
ETSI
Comment
No procedure
transaction
identity assigned
Condition
NETWORKINITIATED
UEINITIATED
Activate dedicated
EPS bearer
context request
pc_UTRAN
AND/OR
pc_GERAN
Best Effort
pc_GERAN
NOT
(pc_NB or
pc_NonIP_P
DN)
pc_NB or
pc_NonIP_P
DN
NOT
(pc_NB or
pc_NonIP_P
DN)
pc_NB or
pc_NonIP_P
DN
3GPP TS 36.508 version 15.5.0 Release 15
NETWORK-INITIATED
UE-INITIATED
NOTE:
-
559
ETSI TS 136 508 V15.5.0 (2019-07)
Network initiated ESM procedures
UE initiated ESM procedures
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ACTIVATE DEFAULT EPS BEARER CONTEXT ACCEPT
This message is sent by the UE to the SS.
Table 4.7.3-4: ACTIVATE DEFAULT EPS BEARER CONTEXT ACCEPT
Derivation Path: 24.301 clause 8.3.4
Information Element
Protocol discriminator
EPS bearer identity
Procedure transaction identity
Value/remark
ESM
The same value as the
value set in ACTIVATE
DEFAULT EPS BEARER
CONTEXT REQUEST
message
'0000 0000'B
Activate default EPS bearer context accept message
identity
'1100 0010'B
Protocol configuration options
Not present or any
allowed value
Protocol configuration options
Not present
Extended protocol configuration options
Not present or any
allowed value
NOTE:
-
Comment
Condition
No procedure
transaction
identity assigned
Activate default
EPS bearer
context accept
NOT
(pc_NB or
pc_NonIP_P
DN)
pc_NB or
pc_NonIP_P
DN
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ACTIVATE DEFAULT EPS BEARER CONTEXT REJECT
This message is sent by UE to the SS.
Table 4.7.3-5: ACTIVATE DEFAULT EPS BEARER CONTEXT REJECT
Derivation Path: 24.301 clause 8.3.5
Information Element
Protocol discriminator
EPS bearer identity
Procedure transaction identity
Value/remark
ESM
The same value as the
value set in ACTIVATE
DEFAULT EPS BEARER
CONTEXT REQUEST
message.
'0000 0000'B
Activate default EPS bearer context reject message
identity
'1100 0011'B
ESM cause
The value is set
according to specific
message content.
Not present
Not present
Protocol configuration options
Extended protocol configuration options
ETSI
Comment
No procedure
transaction
identity assigned
Activate default
EPS bearer
context reject
Condition
3GPP TS 36.508 version 15.5.0 Release 15
NOTE:
560
ETSI TS 136 508 V15.5.0 (2019-07)
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
561
ETSI TS 136 508 V15.5.0 (2019-07)
ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST
This message is sent by the SS to the UE.
Table 4.7.3-6: ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
Derivation Path: 24.301 clause 8.3.6
Information Element
Protocol discriminator
EPS bearer identity
Procedure transaction identity
Activate default EPS bearer context request message
identity
EPS QoS
EPS QoS
Access point name
562
Value/remark
ESM
An arbitrarily selected
value between '0101'B
and '1111'B.
The same value as the
value set in the latest
PDN CONNECTIVITY
REQUEST message sent
prior to this message.
'1100 0001'B
APN as provided in ESM
INFORMATION
RESPONSE or PDN
CONNECTIVITY
REQUEST
Access point name
IMS.
mnc<MNC>.mcc<MCC>.
gprs
The <MNC> and <MCC>
are set to the same
values as in IMSI.
Use APN Network
Identifier provided in
ESM INFORMATION
RESPONSE or PDN
CONNECTIVITY
REQUEST message and
the APN Operator
Identifier
mnc<MNC>.mcc<MCC>.
gprs. The <MNC> and
<MCC> are set to the
same values as in IMSI.
PDN address
Length of PDN address contents
PDN type value
PDN address information
Comment
Condition
Activate default
EPS bearer
context request
See Reference default
EPS bearer context #1 in
table 6.6.1-1
See Reference default
EPS bearer context #2 in
table 6.6.1-1
The SS defines a Default
APN
Access point name
Access point name
ETSI TS 136 508 V15.5.0 (2019-07)
NOT
IMS_PDN_
ConnEstab
IMS_PDN_
ConnEstab
NOT
IMS_PDN_
ConnEstab
AND NOT
APN_Provid
ed
NOT
IMS_PDN_
ConnEstab
AND
APN_Provid
ed
IMS_PDN_
ConnEstab
AND NOT
APN_Provid
ed
IMS_PDN_
ConnEstab
AND
APN_Provid
ed
IPv4
5 octets
‘001’B
IPv4 address
0.0.0.0
PDN address
Length of PDN address contents
PDN type value
PDN address information
9 octets
‘010’B
IPv6 interface identifier
PDN address
Length of PDN address contents
PDN type value
13 octets
‘011’B
IPv4
The SS provides a
valid IPv4 address
DHCPv4 is to be
used to allocate
the IPv4 address
NOT IPv4DHCP
IPv4-DHCP
IPv6
IPv6
The SS provides a
valid IPv6
interface identifier
IPv4v6
ETSI
IPv4v6
3GPP TS 36.508 version 15.5.0 Release 15
563
PDN address information (Octets 4 to 11)
IPv6 interface identifier
PDN address information (Octets 12 to 15)
IPv4 address
0.0.0.0
ETSI TS 136 508 V15.5.0 (2019-07)
The SS provides a
valid IPv6
interface identifier
The SS provides a
valid IPv4 address
DHCPv4 is to be
used to allocate
the IPv4 address
PDN address
Length of PDN address contents
PDN type value
PDN address information (Octets 4 to 7)
Transaction identifier
Transaction identifier
Negotiated QoS
Negotiated LLC SAPI
Radio priority
Packet flow Identifier
Packet flow Identifier
APN-AMBR
ESM cause
Protocol configuration options
CIoT_CP_N
ON_IP
2 octets
‘101’B
Coded as 0
Not present
Distinct value between 0
and 127 calculated on
basis of the EPS bearer
identity.
See Reference default
EPS bearer context #1 in
table 6.6.1-1
See Reference default
EPS bearer context #1 in
table 6.6.1-1
See Reference default
EPS bearer context #1 in
table 6.6.1-1
Not present
'0000 0000'B
See Reference default
EPS bearer context #1 in
table 6.6.1-1
Not present
Not present
Non-IP PDN
spare
pc_UTRAN
AND/OR
pc_GERAN
Best Effort
Container ID 1
See Reference default
EPS bearer context #1 in
table 6.6.1-1
‘0001’H
Length of container ID 1 contents
Container ID 1 contents
Container ID 2
IPv6 address
Container ID 2 contents
Container ID n
IPv4 address
‘0003’H
Length of container ID n contents
Container ID n contents
P-CSCF
IPv6
Length value
determined by the
TTCN
implementation
P-CSCF IPv6
Address
‘000C’H
Length of container ID 2 contents
IPv6 address
ETSI
pc_GERAN
pc_NB or
pc_NonIP_P
DN
NOT
(pc_NB or
pc_NonIP_P
DN)
Protocol configuration options
Configuration protocol
NOT IPv4DHCP
IPv4-DHCP
P-CSCF
IPv4
Length value
determined by the
TTCN
implementation
P-CSCF IPv4
Address
n assigned to next
available number
Length value
determined by the
TTCN
implementation
DNS IPv6
Address
DNS IPv6
3GPP TS 36.508 version 15.5.0 Release 15
Container ID n+1
564
‘000D’H
Length of container ID n+1 contents
Container ID n+1 contents
IPv4 address
WLAN offload indication
WLAN offload indication
WLAN offload acceptability
Not present
NBIFOM container
Header compression configuration
Control plane only indication
Control plane only indication
Not present
Not present or set
according to specific
message content
Not present
‘0001’B
Extended protocol configuration options
Not present
ETSI TS 136 508 V15.5.0 (2019-07)
n assigned to next
available number
Length value
determined by the
TTCN
implementation
DNS IPv4
Address
WLAN
‘0001’B
Offloading the
traffic of the PDN
connection via a
WLAN when in S1
mode is
acceptable
CIoT_Contr
olPlane_PD
N
NOT
(pc_NB or
pc_NonIP_P
DN)
pc_NB or
pc_NonIP_P
DN
Extended protocol configuration options
Configuration protocol
Container ID n
See Reference default
EPS bearer context #1 in
table 6.6.1-1
‘0003’H
Length of container ID n contents
Container ID n contents
Container ID n+1
IPv6 address
‘000D’H
Length of container ID n+1 contents
Container ID n+1 contents
Serving PLMN rate control
Serving PLMN rate control
DNS IPv4
IPv4 address
Not present
‘FFFF’H
ETSI
n assigned to next
available number
Length value
determined by the
TTCN
implementation
DNS IPv6
Address
n assigned to next
available number
Length value
determined by the
TTCN
implementation
DNS IPv4
Address
DNS IPv6
Maximum number
of ESM DATA
TRANSPORT
messages allowed
per 6 min interval
is not restricted
CIoT_Contr
olPlane_PD
N
DNS IPv4
3GPP TS 36.508 version 15.5.0 Release 15
Condition
IPv4
IPv6
IPv4v6
IPv4-DHCP
565
ETSI TS 136 508 V15.5.0 (2019-07)
Explanation
If in the last PDN CONNECTIVITY REQUEST sent prior to this message, the PDN type =
'001'B
If in the last PDN CONNECTIVITY REQUEST sent prior to this message, the PDN type =
'010'B
If in the last PDN CONNECTIVITY REQUEST sent prior to this message, the PDN type =
'011'B
If in the last PDN CONNECTIVITY REQUEST or ESM INFORMATION RESPONSE sent
prior to this message, the IE Protocol configuration options contains a configuration
protocol option = '000B00H' ("IPv4 address allocation via DHCPv4", length of contents = 0).
Note 1: This condition is used in conjunction with IPv4 or IPv4v6 as indicated in the "PDN
address row" just above.
Note 2: If both messages, PDN CONNECTIVITY REQUEST and ESM INFORMATION
RESPONSE, are received and contain a Protocol configuration options IE then the IE from
the message which is received later shall be used.
If in the last PDN CONNECTIVITY REQUEST or ESM INFORMATION RESPONSE sent
prior to this message, the Protocol configuration options and the additional parameter list
was included with a “P-CSCF IPv6 Address Request”
P-CSCF IPv6
Note 1: This condition is only applicable for UEs with IMS support (TS 36.523-2 A.4.41/25).
Note 2: If both messages, PDN CONNECTIVITY REQUEST and ESM INFORMATION
RESPONSE, are received and contain a Protocol configuration options IE then the IE from
the message which is received later shall be used.
If in the last PDN CONNECTIVITY REQUEST or ESM INFORMATION RESPONSE sent
prior to this message, the Protocol configuration options and the additional parameter list
was included with a “P-CSCF IPv4 Address Request”
P-CSCF IPv4
Note 1: This condition is only applicable for UEs with IMS support (TS 36.523-2 A.4.41/25).
Note 2: If both messages, PDN CONNECTIVITY REQUEST and ESM INFORMATION
RESPONSE, are received and contain a Protocol configuration options IE then the IE from
the message which is received later shall be used.
If in the last PDN CONNECTIVITY REQUEST or ESM INFORMATION RESPONSE sent
prior to this message, the Protocol configuration options and the additional parameter list
was included with a “DNS IPv6 Address Request”.
DNS IPv6
Note: If both messages, PDN CONNECTIVITY REQUEST and ESM INFORMATION
RESPONSE, are received and contain a Protocol configuration options IE then the IE from
the message which is received later shall be used.
If in the last PDN CONNECTIVITY REQUEST or ESM INFORMATION RESPONSE sent
prior to this message, the Protocol configuration options and the additional parameter list
was included with a “DNS IPv4 Address Request”.
DNS IPv4
APN_Provided
IMS_PDN_ConnEstab
WLAN
CIoT_ControlPlane_PDN
CIoT_CP_NON_IP
NOTE:
Note: If both messages, PDN CONNECTIVITY REQUEST and ESM INFORMATION
RESPONSE, are received and contain a Protocol configuration options IE then the IE from
the message which is received later shall be used.
If in the last PDN CONNECTIVITY REQUEST or ESM INFORMATION RESPONSE sent
prior to this message an Access Point Name was included
NOTE: APN_Provided is equivalent to pc_Provide_IMS_APN for establishment of the first
PDN connectivity during initial registration and if the first PDN is IMS (see table 4.7.3-14)
If this message refers to establishment of connectivity to the IMS PDN (only applicable if
the UE supports IMS according to TS 36.523-2 A.4.4-1/25).
If the message is being sent for RAN Assisted WLAN interworking.
If the associated PDN connection is only for control plane CIoT optimization
If the UE requests a Non-IP type PDN
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ETSI
3GPP TS 36.508 version 15.5.0 Release 15
-
566
ETSI TS 136 508 V15.5.0 (2019-07)
BEARER RESOURCE ALLOCATION REJECT
This message is sent by the SS to the UE.
Table 4.7.3-6A: BEARER RESOURCE ALLOCATION REJECT
Derivation Path: 24.301 clause 8.3.7
Information Element
Protocol discriminator
EPS bearer identity
Procedure transaction identity
Bearer resource allocation reject message identity
ESM cause
Protocol configuration options
NBIFOM container
Extended protocol configuration options
NOTE:
-
Value/remark
ESM
'0000'B
The value indicated in
BEARER RESOURCE
ALLOCATION
REQUEST message.
'1101 0101'B
Comment
Condition
No EPS bearer
identity assigned
Bearer resource
allocation reject
Set according to specific
message content.
Not present
Not present
Not present
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
BEARER RESOURCE ALLOCATION REQUEST
This message is sent by the UE to the SS.
Table 4.7.3-6B: BEARER RESOURCE ALLOCATION REQUEST
Derivation Path: 24.301 clause 8.3.8
Information Element
Protocol discriminator
EPS bearer identity
Value/remark
ESM
'0000'B
Procedure transaction identity
Bearer resource allocation request message identity
Any value from 1 to 254
'1101 0100'B
Linked EPS bearer identity
The EPS bearer identity
of the associated default
bearer.
'0000'B
Spare half octet
Traffic flow aggregate
Number of packet filters
E bit
TFT operation code
Packet filter list
Parameters list
Required traffic flow QoS
Protocol configuration options
NBIFOM container
Extended protocol configuration options
NOTE:
Greater than 0 and less
than or equal to 16
Any allowed value
'001'B
Any allowed value
Not present or any
allowed value
Any allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Comment
No EPS bearer
identity assigned
Bearer resource
allocation request
Create new TFT
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
567
ETSI TS 136 508 V15.5.0 (2019-07)
BEARER RESOURCE MODIFICATION REJECT
This message is sent by the SS to the UE.
Table 4.7.3-7: BEARER RESOURCE MODIFICATION REJECT
Derivation Path: 24.301 clause 8.3.9
Information Element
Protocol discriminator
EPS bearer identity
Procedure transaction identity
Bearer resource modification reject message identity
ESM cause
Protocol configuration options
NBIFOM container
Extended protocol configuration options
NOTE:
Value/remark
ESM
'0000'B
The value indicated in
BEARER RESOURCE
MODIFICATION
REQUEST message.
'1101 0111'B
Comment
No EPS bearer
identity assigned
Bearer resource
modification reject
Set according to specific
message content.
Not present
Not present
Not present
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ETSI
Condition
3GPP TS 36.508 version 15.5.0 Release 15
-
568
ETSI TS 136 508 V15.5.0 (2019-07)
BEARER RESOURCE MODIFICATION REQUEST
This message is sent by the UE to the SS.
Table 4.7.3-8: BEARER RESOURCE MODIFICATION REQUEST
Derivation Path: 24.301 clause 8.3.10
Information Element
Protocol discriminator
EPS bearer identity
Value/remark
ESM
'0000'B
Procedure transaction identity
Bearer resource modification request message
identity
Any value from 1 to 254
'1101 0110'B
EPS bearer identity for packet filter
The EPS bearer identity
of the associated
dedicated EPS bearer
related with packet filter.
'0000'B
Any allowed value
Spare half octet
Traffic flow aggregate
Traffic flow aggregate
Number of packet filters
Greater than 0 and less
than or equal to 16
Any allowed value
'101'B
E bit
TFT operation code
Packet filter list
Parameters list
Any allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present
'0010 0100'B
Required traffic flow QoS
ESM cause
Protocol configuration options
NBIFOM container
Header compression configuration
Extended protocol configuration options
Condition
RELEASE-REQUESTED
NOTE:
Comment
No EPS bearer
identity assigned
Bearer resource
modification
request
RELEASEREQUESTE
D
Delete packet
filters from
existing TFT
Regular
deactivation
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Not present or any
allowed value
Explanation
UE requests the release of bearer resources.
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
ETSI
Condition
RELEASEREQUESTE
D
3GPP TS 36.508 version 15.5.0 Release 15
569
ETSI TS 136 508 V15.5.0 (2019-07)
Table 4.7.3-9: (Void)
Table 4.7.3-10: (Void)
-
DEACTIVATE EPS BEARER CONTEXT ACCEPT
This message is sent by the UE to the SS.
Table 4.7.3-11: DEACTIVATE EPS BEARER CONTEXT ACCEPT
Derivation Path: 24.301 clause 8.3.9
Information Element
Protocol discriminator
EPS bearer identity
Procedure transaction identity
Value/remark
ESM
The same value as the
value set in
DEACTIVATE EPS
BEARER CONTEXT
REQUEST message.
'0000 0000'B
Deactivate EPS bearer context accept message
identity
'1100 1110'B
Protocol configuration options
Not present or any
allowed value
Not present or any
allowed value
Extended protocol configuration options
NOTE:
-
Comment
Condition
No procedure
transaction
identity assigned
Deactivate EPS
bearer context
accept
This message is always sent within SECURITY PROTECTED NAS MESSAGE message.
DEACTIVATE EPS BEARER CONTEXT REQUEST
This message is sent by the SS to the UE.
Table 4.7.3-12: DEACTIVATE EPS BEARER CONTEXT REQUEST
Derivation Path: 24.301 clause 8.3.10
Information Element
Protocol discriminator
EPS bearer identity
Procedure transaction identity
Deact