Why You Should Use A Purging Compound: A Few Reasons You could likely cleanse your hands with only water. … …but, does it make sense? Similarly, you could clean your injection moulders, extruders, and blow moulders with Virgin resin and regrind… …but, does it make sense? Why should you be using a Purging Compound? Because it’s faster, more effective and saves a lot in the long run. It contains components such as emulsifiers, abrasives or foam agents. It will speed up removing contamination from the barrel. They are specially designed for this purpose. It’s 2-6 times faster than virgin resin & 100 times faster than manual cleaning. Purging Compounds for Blow Molding are designed to push impurities out of the system. Here is why it makes sense to use Purging Compounds. Reduces Scrap: It effectively reduces scrap by clearing out the last residues of resins and colours from production, thus decreasing the amount of waste generated. This improves your factory productivity and efficiency. Reduces Downtime: Unlike the use of re-grinds, commercial Purging Compounds are designed to clean efficiently! There is a shorter downtime and increases the efficiency of machinery and workers. It reduces the time wasted in resin changeovers. Faster changeovers also allow you to save on staff time. Eliminate Contamination: Their chemical components help you to remove carbon residues, colour streaks and gels during production changeovers. This improves your factory rejection rates and avoids annoying machine stops during the production process. Prevent Screw Pulls: The contamination needs to be removed somehow. If the machine is not cleaned thoroughly, it will eventually be necessary to remove the screw and manually clean it. Eliminate any Contamination from the Hot Runners: Certain injection moulding changeovers may require more time due to stubborn colour residues inside the hot runners. Fortunately, there are Purging Compounds available that can be safely used through the mould. Liquid Purging Compounds are particularly beneficial in this situation. Reduce Rejection Rates: By cleaning the machine properly after a material/colour change or long shutdown, you will prevent product rejections by your quality team or awkward orders returned by your customer. Cost-effective: Purging Compounds help you to decrease costs by reducing downtime and scrap during colour and material changes. All aspects need to be taken into account when assessing this solution. It may include the material, machine, labour, scrap, customer satisfaction, lost production, and the cost of Purging Compounds. Take into consideration the cost of replacing parts due to the inefficient cleaning of machines using in-house solutions. Also consider the downtime, the lost production and the waste due to contaminated products. You will see there is a significant savings that commercial purging products offer. Consistency in Producing Quality: Use the Purging Compound that is right for your applications. You will consistently see an increase in savings and produce quality products. Discover the most cost-effective Purging Compounds produced by Bharati Polychem Pvt Ltd. They are using a customer-centric approach and deep research & development to produce a UNICLEANPLUS™ Purging Compound. It is useful for customers during the transition of their colour and material changes. It also reduces or eliminates the black specks and colour streaking during the process. UNICLEANPLUS™ Purging Compounds also aid in routine maintenance, preventative maintenance and machine shutdown or start-up. Visit https://www.unicleanplus.com/ today to learn more about the Purging Compound for Blow Molding! To Read Our Published Blog: https://unicleanplus.weebly.com/blog/why-you-should-use-a-purging-compound-a-few-reasons Thank You! UNICLEANPLUS Address : Bharatipolychem Pvt Ltd, Plot No-451 City: Lesliganj State: Jharkhand Zip: 822118 Country: India Phone: +91 9021232809 Website: https://www.unicleanplus.com/ Email: sales@bharatipolychem.com
