The successful
boom technology
of Liebherr.
Subject to modification.
Please contact
LIEBHERR-WERK EHINGEN GMBH, D-89582 Ehingen
콯 (0 73 91) 5 02-0, Fax (0 73 91) 5 02-3 99
www.lwe.liebherr.de, E-mail: info@lwe.liebherr.com
TP 248 d. 6.00
The better crane.
The new boom technology.
Liebherr has developed entirely new 5/6/7-section telescopic booms for the LTM mobile cranes of the 60, 80, 90,
100, 120, 160, 300 and 500 t class. The technology's
focal points are the new oviform boom profile and the
automatic telescoping system ”Telematik”.
The oviform boom profile.
It provides particular inherent stability against deflection and torsion. Since the telescopes do no longer
need to be equipped with buckling resistance gussets
nor with material doublings, a considerable crosssection enlargement of the structural components can
be realized by reducing the distance between the individual telescopes. At steep boom position as well as at
wider radii, the new oviform boom profile offers
optimal lifting capacities.
telescopic
boom pin
The automatic rapid-cycle telescoping
system ”Telematik”.
In essence, it consists of the following:
● the double-action telescoping ram
● the hydraulic gripper interlocking system at the base
of the hydraulic ram
● the hydraulic boom pins for interlocking the boom
sections with one another, and
● the electric/electronic sensorial system, an
additional module of the LICCON crane control .
single-stage
telescoping ram
The gripper and boom interlocking systems are coupled
with one another, i.e. a boom section can only be
released at the upper shell if the gripper is interlocked
with this particular boom section at the same time.
This also guarantees mechanical reliability of the
telescoping system. With the exception of the electrical
supply line to the hoist limit switch, no electric,
hydraulic nor pneumatic components are located in or
on the telescopic boom. The automatic telescope control
– part of the LICCON crane control – offers more than
1000 different extension conditions of the telescopic
boom. The saving of time during telescoping due to the
automatic operation and thus the combinatorial variety
determine the outstanding functionality of the new
boom technology. With their long telescopic booms, the
Liebherr mobile cranes of the 60, 80, 90, 100, 120, 160,
300 and 500 t class offer entirely new application
facilities.
power supply for
interlocking device
length sensor rope
boom interlook
with transvere
yoke
control valve for
boom/pusher dog
interlocking procedure
energy supply for
interlocking by
hydraulic ram
contactless
proximity switches
pusher dog
interlock
ram guide
2
3
The new 60-tonner with highlights
offered by Liebherr.
70 m
The new 80-tonner with highlights
offered by Liebherr.
5-section, 42 m long telescopic boom for 42 m height under
hook
6-section, 48 m long telescopic boom for 48 m height under
hook
biparted, 9.5 - 17 m long swing-away jib for 60 m height under
hook, mountable at 0°, 20° or 40°
K 17 m
10.1 t safe working load on the 42 m long telescopic boom
60 m
biparted, 10.5 - 19 m long swing-away jib for 68 m height
under hook, mountable at 0°, 20° or 40°
K 19 m
8.7 t safe working load on the 48 m long telescopic boom
oviform, extremely rigid boom profile for high lifting
capacities
20°
proved rapid-cycle telescoping system "Telematik" for the
automatic extension of the boom to the desired length
40°
proved rapid-cycle telescoping system ”Telematik” for the
automatic extension of the boom to the desired length
40°
K 10.5 m
K 9.
9,5 m
50 m
42 m
39.9 m
oviform, extremely rigid boom profile for high lifting
capacities
20°
high lifting capacities with 12 t total counterweight, rapid
ballasting procedure with ”keyhole” system
high lifting capacities with 16 t total counterweight, rapid
ballasting procedure with "keyhole" system
electrically pilot-controlled load sensing system,
4 superimposable working motions, working speeds
preselectable by steps
electrically pilot-controlled load sensing system,
4 superimposable working motions, working speeds
preselectable by steps
comfortable crane cab of modern design, steering and
outrigger actuation from the crane cab is part of the
standard equipment
comfortable crane cab, tiltable backwards by 20°, steering
and outrigger actuation from the crane cab is part of the
standard equipment
self-manufactured hoist winches with 57 kN line pull
and 130 m/min line speed
48 m
self-manufactured hoist winches with 57 kN line pull and
130 m/min line speed
45 m
max. 10.1 t
LICCON system – a Liebherr design – the most modern
programmable computer system world-wide for the control
and monitoring of mobile cranes
max. 8.7 t
LICCON
41.6 m
40 m
35.4 m
outstandingly compact, 4-axle carrier with 8 x 6 drive
(optional) and all wheel-steering included in the standard
equipment
operative weight 48 t (4 x 12 t axle load), incl. 12 t total
counterweight and biparted swing-away jib
32.4 m
outstandingly compact, 4-axle carrier with 8 x 8 drive
(optional) and all wheel-steering included in the standard
equipment
operative weight 48 t (4 x 12 t axle load),
incl. 6.6 t counterweight and biparted swing-away jib
38.2 m
”Niveaumatik”, the crane and road preserving
suspension system
34.8 m
”Niveaumatik”, the crane and road preserving suspension
linkage of the electric and electronic components by most
modern data bus transfer technique, distinctive increase of
functionality and efficiency (LSB = Liebherr System Bus)
28.8 m
LSB
30 m
25.2 m
31.3 m
electric and electronic components interlinked by the most
modern data bus transmission technique which distinctively
contributes to an increase in functionality and efficiency
(LSB = Liebherr System Bus)
Liebherr turbo-charged Diesel engine of 270 kW, exhaust
emission acc. to EURO 2, fully electronic engine management,
single-engine concept
Liebherr turbo-charged Diesel engine of 320 kW output,
exhaust emission acc. to EURO 2, fully electronic engine
management, single-engine concept
27.9 m
driving cab with ergonomical cockpit and functional
design
24.5 m
21.6 m
LICCON system – a Liebherr design – the most modern
programmable computer system world-wide for the control
and monitoring of mobile cranes
driving cab with ergonomical cockpit and functional
design
21.1 m
18 m
20 m
17.6 m
14.5 m
14.2 m
10.9 m
10.8 m
10 m
Mobile crane type LTM 1060/2
4
Mobile crane type LTM 1080/1
5
The new 60-tonner with highlights
offered by Liebherr.
70 m
The new 80-tonner with highlights
offered by Liebherr.
5-section, 42 m long telescopic boom for 42 m height under
hook
6-section, 48 m long telescopic boom for 48 m height under
hook
biparted, 9.5 - 17 m long swing-away jib for 60 m height under
hook, mountable at 0°, 20° or 40°
K 17 m
10.1 t safe working load on the 42 m long telescopic boom
60 m
biparted, 10.5 - 19 m long swing-away jib for 68 m height
under hook, mountable at 0°, 20° or 40°
K 19 m
8.7 t safe working load on the 48 m long telescopic boom
oviform, extremely rigid boom profile for high lifting
capacities
20°
proved rapid-cycle telescoping system "Telematik" for the
automatic extension of the boom to the desired length
40°
proved rapid-cycle telescoping system ”Telematik” for the
automatic extension of the boom to the desired length
40°
K 10.5 m
K 9.
9,5 m
50 m
42 m
39.9 m
oviform, extremely rigid boom profile for high lifting
capacities
20°
high lifting capacities with 12 t total counterweight, rapid
ballasting procedure with ”keyhole” system
high lifting capacities with 16 t total counterweight, rapid
ballasting procedure with "keyhole" system
electrically pilot-controlled load sensing system,
4 superimposable working motions, working speeds
preselectable by steps
electrically pilot-controlled load sensing system,
4 superimposable working motions, working speeds
preselectable by steps
comfortable crane cab of modern design, steering and
outrigger actuation from the crane cab is part of the
standard equipment
comfortable crane cab, tiltable backwards by 20°, steering
and outrigger actuation from the crane cab is part of the
standard equipment
self-manufactured hoist winches with 57 kN line pull
and 130 m/min line speed
48 m
self-manufactured hoist winches with 57 kN line pull and
130 m/min line speed
45 m
max. 10.1 t
LICCON system – a Liebherr design – the most modern
programmable computer system world-wide for the control
and monitoring of mobile cranes
max. 8.7 t
LICCON
41.6 m
40 m
35.4 m
outstandingly compact, 4-axle carrier with 8 x 6 drive
(optional) and all wheel-steering included in the standard
equipment
operative weight 48 t (4 x 12 t axle load), incl. 12 t total
counterweight and biparted swing-away jib
32.4 m
outstandingly compact, 4-axle carrier with 8 x 8 drive
(optional) and all wheel-steering included in the standard
equipment
operative weight 48 t (4 x 12 t axle load),
incl. 6.6 t counterweight and biparted swing-away jib
38.2 m
”Niveaumatik”, the crane and road preserving
suspension system
34.8 m
”Niveaumatik”, the crane and road preserving suspension
linkage of the electric and electronic components by most
modern data bus transfer technique, distinctive increase of
functionality and efficiency (LSB = Liebherr System Bus)
28.8 m
LSB
30 m
25.2 m
31.3 m
electric and electronic components interlinked by the most
modern data bus transmission technique which distinctively
contributes to an increase in functionality and efficiency
(LSB = Liebherr System Bus)
Liebherr turbo-charged Diesel engine of 270 kW, exhaust
emission acc. to EURO 2, fully electronic engine management,
single-engine concept
Liebherr turbo-charged Diesel engine of 320 kW output,
exhaust emission acc. to EURO 2, fully electronic engine
management, single-engine concept
27.9 m
driving cab with ergonomical cockpit and functional
design
24.5 m
21.6 m
LICCON system – a Liebherr design – the most modern
programmable computer system world-wide for the control
and monitoring of mobile cranes
driving cab with ergonomical cockpit and functional
design
21.1 m
18 m
20 m
17.6 m
14.5 m
14.2 m
10.9 m
10.8 m
10 m
Mobile crane type LTM 1060/2
4
Mobile crane type LTM 1080/1
5
The new 100-tonner with highlights
offered by Liebherr.
The 90-tonner with highlights
offered by Liebherr.
6-section, 52 m long telescopic boom for 52 m height under
hook
K 19 m
6-section, 52 m long telescopic boom for 52 m height under
hook
K 19 m
biparted, 10.8 m - 19 m long swing-away jib for 72 m height
under hook, mountable at 0°, 20° or 40°
biparted, 10.8 - 19 m long swing-away jib for 72 m height
under hook, mountable at 0°, 15°, 30° or 45°
10.2 t or 8.8 t safe working load on the 52 m long
telescopic boom (with 20 t / 1.2 t counterweight)
30°
15°
max. 31 t
45°
oviform, extremely rigid boom profile for high lifting
capacities
K 10,8 m
11.4 t safe working load on the 52 m long
telescopic boom (with 35 t counterweight)
20°
K 10.8 m
oviform, extremely rigid boom profile for high lifting
capacities
40°
proved rapid-cycle telescoping system ”Telematik” for the
automatic extension of the boom to the desired length
proved rapid-cycle telescoping system ”Telematik” for the
automatic extension of the boom to the desired length
high lifting capacities with 35 t total counterweight, rapid
ballasting procedure with ”keyhole” system
variable application spectrum with 20 t, 12.2 t, 7 t, 3 t
or 1.2 t counterweight
electrically pilot-controlled load sensing system,
4 superimposable working motions, working speeds
preselectable by steps
electrically pilot-controlled load sensing system,
4 superimposable working motions, working speeds
preselectable by steps
52 m
comfortable crane cab, tiltable backwards by 20°
52 m
comfortable crane cab, tiltable backwards by 20°
max. 10.2 t
48.8 m
48.8 m
LICCON
max. 11.4 t
self-manufactured hoist winches with 88 kN line pull and
130 m/min line speed
LICCON system – a Liebherr design – the most modern,
programmable computer system world-wide for the control
and monitoring of mobile cranes
LICCON system – a Liebherr design – the most modern,
programmable computer system world-wide for the control
and monitoring of mobile cranes
45 m
45.1 m
extremely compact, 4-axle carrier with all-wheel steering
41.4 m
operative weight 48 t (4 x 12 t axle load),
incl. 1.2 t counterweight
”Niveaumatik”, the crane and road preserving
suspension system
37.7 m
operative weight 60 t (5 x 12 t axle load)
incl. 11 t - 15 t counterweight
37.6 m
variable supporting basis with LICCON supporting
force indication and inclinometer (optional)
”Niveaumatik”, the crane and road preserving suspension
system
33.9 m
33.9 m
for the carrier drive:
Liebherr turbo-charged Diesel engine of 300 kW output,
exhaust emission acc. to EURO 2, Allison automatic
transmission
for the crane drive:
Liebherr turbo-charged Diesel engine of 120 kW output
30.2 m
outstandingly compact, 5-axle carrier with 10 x 8 drive
(optional) and 4 axles steered
41.3 m
LSB
30.1 m
for the carrier drive:
Liebherr turbo-charged Diesel engine of 400 kW output,
exhaust emission acc. to EURO 3, ZF 16-speed gear box with
AS-TRONIC
for the crane drive:
Liebherr turbo-charged Diesel engine of 149 kW output
26.4 m
26.5 m
driving cab with ergonomical cockpit and
functional design
driving cab with ergonomical cockpit and funktional
design
22.7 m
22.8 m
electric and electronic components interlinked by the most
modern data bus transmission technique which distinctively
contributes to an increase in functionality and efficiency
(LSB = Liebherr System Bus)
19 m
19.1 m
15.2 m
15.4 m
11.5 m
11.7 m
Mobile crane type LTM 1090/2
6
Mobile crane type Typ LTM 1100/2
7
The new 100-tonner with highlights
offered by Liebherr.
The 90-tonner with highlights
offered by Liebherr.
6-section, 52 m long telescopic boom for 52 m height under
hook
K 19 m
6-section, 52 m long telescopic boom for 52 m height under
hook
K 19 m
biparted, 10.8 m - 19 m long swing-away jib for 72 m height
under hook, mountable at 0°, 20° or 40°
biparted, 10.8 - 19 m long swing-away jib for 72 m height
under hook, mountable at 0°, 15°, 30° or 45°
10.2 t or 8.8 t safe working load on the 52 m long
telescopic boom (with 20 t / 1.2 t counterweight)
30°
15°
max. 31 t
45°
oviform, extremely rigid boom profile for high lifting
capacities
K 10,8 m
11.4 t safe working load on the 52 m long
telescopic boom (with 35 t counterweight)
20°
K 10.8 m
oviform, extremely rigid boom profile for high lifting
capacities
40°
proved rapid-cycle telescoping system ”Telematik” for the
automatic extension of the boom to the desired length
proved rapid-cycle telescoping system ”Telematik” for the
automatic extension of the boom to the desired length
high lifting capacities with 35 t total counterweight, rapid
ballasting procedure with ”keyhole” system
variable application spectrum with 20 t, 12.2 t, 7 t, 3 t
or 1.2 t counterweight
electrically pilot-controlled load sensing system,
4 superimposable working motions, working speeds
preselectable by steps
electrically pilot-controlled load sensing system,
4 superimposable working motions, working speeds
preselectable by steps
52 m
comfortable crane cab, tiltable backwards by 20°
52 m
comfortable crane cab, tiltable backwards by 20°
max. 10.2 t
48.8 m
48.8 m
LICCON
max. 11.4 t
self-manufactured hoist winches with 88 kN line pull and
130 m/min line speed
LICCON system – a Liebherr design – the most modern,
programmable computer system world-wide for the control
and monitoring of mobile cranes
LICCON system – a Liebherr design – the most modern,
programmable computer system world-wide for the control
and monitoring of mobile cranes
45 m
45.1 m
extremely compact, 4-axle carrier with all-wheel steering
41.4 m
operative weight 48 t (4 x 12 t axle load),
incl. 1.2 t counterweight
”Niveaumatik”, the crane and road preserving
suspension system
37.7 m
operative weight 60 t (5 x 12 t axle load)
incl. 11 t - 15 t counterweight
37.6 m
variable supporting basis with LICCON supporting
force indication and inclinometer (optional)
”Niveaumatik”, the crane and road preserving suspension
system
33.9 m
33.9 m
for the carrier drive:
Liebherr turbo-charged Diesel engine of 300 kW output,
exhaust emission acc. to EURO 2, Allison automatic
transmission
for the crane drive:
Liebherr turbo-charged Diesel engine of 120 kW output
30.2 m
outstandingly compact, 5-axle carrier with 10 x 8 drive
(optional) and 4 axles steered
41.3 m
LSB
30.1 m
for the carrier drive:
Liebherr turbo-charged Diesel engine of 400 kW output,
exhaust emission acc. to EURO 3, ZF 16-speed gear box with
AS-TRONIC
for the crane drive:
Liebherr turbo-charged Diesel engine of 149 kW output
26.4 m
26.5 m
driving cab with ergonomical cockpit and
functional design
driving cab with ergonomical cockpit and funktional
design
22.7 m
22.8 m
electric and electronic components interlinked by the most
modern data bus transmission technique which distinctively
contributes to an increase in functionality and efficiency
(LSB = Liebherr System Bus)
19 m
19.1 m
15.2 m
15.4 m
11.5 m
11.7 m
Mobile crane type LTM 1090/2
6
Mobile crane type Typ LTM 1100/2
7
The 120-tonner with highlights
offered by Liebherr.
K 28 m
15°
K 21 m
6-section, 56 m long telescopic boom for 56 m height under
hook
6-section, 60 m long telescopic boom for 60 m height under
hook
3-section, 11.2 - 28 m long swing-away jib for 84 m height
under hook, mountable at 0°, 15°, 30° or 45°
4-section, 12.2 - 36 m long swing-away jib for 96 m hight
under hook, mountable at 0°, 15°, 30° or 45°
K 29 m
12.6 t safe working load on the 56 m long telescopic boom
30°
The 160-tonner with highlights
offered by Liebherr.
K 36 m
15 t or 13.9 t safe working load on the 60 m long telescopic
boom (with 50 t / 0 t counterweight)
oviform, extremely rigid boom profile for high lifting
capacities
oviform, extremely rigid boom profile for high lifting
capacities
15°
K 22 m
proved rapid-cycle telescoping system ”Telematik” for the
automatic extension of the boom to the desired length
45°
K 11.2 m
proved rapid-cycle telescoping system ”Telematik” for the
automatic extension of the boom to the desired length
30°
variable application spectrum with 35 t, 25 t, 15 t or 7 t
counterweight
K 12.2 m
electrically pilot-controlled load sensing system,
4 superimposable working motions, working speeds
preselectable by steps
variable application spectrum with 50 t, 35 t, 23 t, 11 t
or 0 t counterweight
45°
diesel-hydraulic crane drive with 2 variable displacement
pumps, closed oil circuits for hoist gear and slewing gear,
open oil circuits for luffing and telescoping, electronic
crane control
comfortable crane cab, tiltable backwards by 20°
56
LICCON
52.5 m
comfortable crane cab, tiltable backwards by 20°
LICCON system – a Liebherr design – the most modern,
programmable computer system world-wide for the control
and monitoring of mobile cranes
LICCON
60 m
max. 12.6 t
extremely compact, 5-axle carrier with all-wheel
steering
48.5 m
max. 15 t
variable supporting basis with LICCON supporting force
indication and inclinometer (optional)
”Niveaumatik”, the crane and road preserving suspension
system
47.6 m
variable supporting basis with LICCON supporting force
indication and inclinometer (optional)
for the carrier drive:
Liebherr turbo-charged Diesel engine of 400 kW output,
exhaust emission acc. to EURO 2,
Allison automatic transmission
for the crane drive:
Liebherr turbo-charged Diesel engine of 120 kW output
36.5 m
operative weight 60 t (5 x 12 t axle load)
52 m
”Niveaumatik”, the crane and road preserving
suspension system
40.5 m
extremely compact, 5-axle carrier with all-wheel steering
56.3 m
operative weight 60 t (5 x 12 t axle load),
incl. 7 t counterweight
44.5 m
43.3 m
or the carrier drive:
Liebherr turbo-charged Diesel engine of 400 kW output,
exhaust emission acc. to EURO 2,
Allison automatic transmission
for the crane drive:
Liebherr turbo-charged Diesel engine of 120 kW output
39 m
32.5 m
driving cab with ergonomical cockpit and funktional
design
LICCON system – a Liebherr design – the most modern,
programmable computer system world-wide for the control
and monitoring of mobile cranes
34.7 m
driving cab with ergonomical cockpit and funktional
design
28.5 m
30.4 m
24.5 m
26.1 m
20.6 m
21.8 m
16.6 m
17.5 m
12.6 m
13.2 m
Mobile crane type Typ LTM 1160/2
Mobile crane type LTM 1120/1
8
9
The 120-tonner with highlights
offered by Liebherr.
K 28 m
15°
K 21 m
6-section, 56 m long telescopic boom for 56 m height under
hook
6-section, 60 m long telescopic boom for 60 m height under
hook
3-section, 11.2 - 28 m long swing-away jib for 84 m height
under hook, mountable at 0°, 15°, 30° or 45°
4-section, 12.2 - 36 m long swing-away jib for 96 m hight
under hook, mountable at 0°, 15°, 30° or 45°
K 29 m
12.6 t safe working load on the 56 m long telescopic boom
30°
The 160-tonner with highlights
offered by Liebherr.
K 36 m
15 t or 13.9 t safe working load on the 60 m long telescopic
boom (with 50 t / 0 t counterweight)
oviform, extremely rigid boom profile for high lifting
capacities
oviform, extremely rigid boom profile for high lifting
capacities
15°
K 22 m
proved rapid-cycle telescoping system ”Telematik” for the
automatic extension of the boom to the desired length
45°
K 11.2 m
proved rapid-cycle telescoping system ”Telematik” for the
automatic extension of the boom to the desired length
30°
variable application spectrum with 35 t, 25 t, 15 t or 7 t
counterweight
K 12.2 m
electrically pilot-controlled load sensing system,
4 superimposable working motions, working speeds
preselectable by steps
variable application spectrum with 50 t, 35 t, 23 t, 11 t
or 0 t counterweight
45°
diesel-hydraulic crane drive with 2 variable displacement
pumps, closed oil circuits for hoist gear and slewing gear,
open oil circuits for luffing and telescoping, electronic
crane control
comfortable crane cab, tiltable backwards by 20°
56
LICCON
52.5 m
comfortable crane cab, tiltable backwards by 20°
LICCON system – a Liebherr design – the most modern,
programmable computer system world-wide for the control
and monitoring of mobile cranes
LICCON
60 m
max. 12.6 t
extremely compact, 5-axle carrier with all-wheel
steering
48.5 m
max. 15 t
variable supporting basis with LICCON supporting force
indication and inclinometer (optional)
”Niveaumatik”, the crane and road preserving suspension
system
47.6 m
variable supporting basis with LICCON supporting force
indication and inclinometer (optional)
for the carrier drive:
Liebherr turbo-charged Diesel engine of 400 kW output,
exhaust emission acc. to EURO 2,
Allison automatic transmission
for the crane drive:
Liebherr turbo-charged Diesel engine of 120 kW output
36.5 m
operative weight 60 t (5 x 12 t axle load)
52 m
”Niveaumatik”, the crane and road preserving
suspension system
40.5 m
extremely compact, 5-axle carrier with all-wheel steering
56.3 m
operative weight 60 t (5 x 12 t axle load),
incl. 7 t counterweight
44.5 m
43.3 m
or the carrier drive:
Liebherr turbo-charged Diesel engine of 400 kW output,
exhaust emission acc. to EURO 2,
Allison automatic transmission
for the crane drive:
Liebherr turbo-charged Diesel engine of 120 kW output
39 m
32.5 m
driving cab with ergonomical cockpit and funktional
design
LICCON system – a Liebherr design – the most modern,
programmable computer system world-wide for the control
and monitoring of mobile cranes
34.7 m
driving cab with ergonomical cockpit and funktional
design
28.5 m
30.4 m
24.5 m
26.1 m
20.6 m
21.8 m
16.6 m
17.5 m
12.6 m
13.2 m
Mobile crane type Typ LTM 1160/2
Mobile crane type LTM 1120/1
8
9
The new 300-tonner with highlights
offered by Liebherr.
The 500-tonner with highlights
offered by Liebherr.
84 m
5-section, 60 m long telescopic boom for 60 m height under
hook
m
31 t safe working load on the 60 m long telescopic boom
21 m long biparted swing-away jib, 10.5 m - 70 m long,
fixed or luffing jib, auxiliary jibs also in conjunction with
the guyed telescopic boom for increased lifting capacity
56.4 m
max. 37 t (TA)
73,4 m
optimized, oviform boom profile with continuous curbature
of the lower shell, improved buckling resistance, particular
high stability, also in the lateral neutral axis, extremely
torsion-resistant system, particularly designed for long
auxiliary jibs
proved rapid-cycle telescoping system "Telematik" for the
automatic extension of the boom to the desired length
60 m
max. 31 t
68,1 m
variable application spectrum with 112.5, 87.5 , 75 t, 50 or
25 t counterweight, hoist gear 2 and 3 pinned to the
counterweight base frame, very easy mounting procedure
diesel-hydraulic crane drive with 3/4 variable
displacement pumps, closed oil circuits for hoist gear,
slewing gear and jib luffing winch, open oil circuits for
luffing and telescoping, electronic crane control
spacious, comfortable crane cab, tiltable backwards by 20°,
modern interior design, crane cab is swivelled to the rear for
road transport
51.2 m
46.1 m
7-section, 84 m long telescopic boom for 84 m height
under hook
4-section, 50 m long telescopic boom for 50 m height
under hook
fixed or luffing jib of 14 m - 91 m, also in conjunction with
the guyed telescopic boom for increased lifting capacity,
max. under-hook height 140 m
20.2 t safe working load on the 84 m long telescopic boom
37 t safe working load on the 78.6 m long, guyed telescopic
boom
oviform, wide boom profile of outstanding stability, also in
the neutral axis; system of extreme torsional rigidity,
particularly designed for long auxiliary jibs, internal
interlocking system of telescopes
proved rapid-cycle telescoping system ”Telematik” for the
automatic extension of the boom to the desired length
max. 20,2 t
78,6 m
variable application spectrum with 180 t, 150 t, 120 t, 90 t,
60 t or 30 t counterweight
62,9 m
diesel-hydraulic crane drive with 8 variable displacement
pumps, electronic control, closed oil circuits for hoist gear,
slewing gear and jib luffing winch, open oil circuits for
luffing and telescoping
spacious, comfortable crane cab with new interior design,
tiltable backwards by 20°, the crane cab must be swivelled to
the rear for road transport
3 self-manufactured hoist winches of 126 kN linepull and
130 or 145 m/min rope speed
57,7 m
up to 3 self-manufactured hoist winches of 105 kN line
pull and 130 m/min rope speed
52,5 m
LICCON system – a Liebherr design – the most modern,
programmable computer system world-wide for the control
and monitoring of mobile cranes
compact, 8-axle carrier, drive/steering 16 x 8 x 14 (optional)
LICCON computer system with new high-performance central
unit (32 bit computer)
40.9 m
47,3 m
compact, 6-axle carrier, variable drive/steering concept
12 x 8 x 10 (optional)
operative weight 96 t (8 x 12 t axle load), incl. 50 m long
telescopic boom
operative weight 72 t (6 x 12 t axle load)
35.7 m
42,1 m
”Niveaumatik”, the crane and road preserving suspension
system, fully automatic levelling of the crane during the
supporting procedure by means of push-button control
interlinkage of the electric and electronic components of the
carrier and crane by most modern data bus transfer
technique (LSB = Liebherr System Bus), distinctive increase
of functionality and efficiency
for the carrier drive Liebherr turbo-charged Diesel engine of
440 kW output, exhaust emission acc. to EURO 2, electronic
engine management with data bus technique, Allison automatic transmission with electronic transmission management
for the crane drive: Liebherr turbo-charged Diesel engine of
180 kW output (IMO 1), installed crossways to the driving
direction, electronic engine management by data bus
technique
30.5 m
25.4 m
driving cab with ergonomical and functional design
”Niveaumatik”, the crane and road preserving suspension
system
LSB
36,9 m
interlinkage of the electric and electronic components of the
carrier and superstructure by modern data bus transfer
technique (LSB = Liebherr System Bus), distinctive increase
of functionality and efficiency
for the carrier drive:
Liebherr turbo-charged Diesel engine of 440 kW output,
exhaust emission acc. to EURO 2, electronic engine
management with data bus technique
for the crane drive:
Liebherr turbo-charged Diesel engine of 240 kW output,
electronic engine management by data bus technique
31,7 m
driving cab with ergonomical and functional design
26,5 m
20.2 m
21,3 m
15 m
16,1 m
Mobile crane type LTM 1300/1
10
Mobile crane type LTM 1500
11
The new 300-tonner with highlights
offered by Liebherr.
The 500-tonner with highlights
offered by Liebherr.
84 m
5-section, 60 m long telescopic boom for 60 m height under
hook
m
31 t safe working load on the 60 m long telescopic boom
21 m long biparted swing-away jib, 10.5 m - 70 m long,
fixed or luffing jib, auxiliary jibs also in conjunction with
the guyed telescopic boom for increased lifting capacity
56.4 m
max. 37 t (TA)
73,4 m
optimized, oviform boom profile with continuous curbature
of the lower shell, improved buckling resistance, particular
high stability, also in the lateral neutral axis, extremely
torsion-resistant system, particularly designed for long
auxiliary jibs
proved rapid-cycle telescoping system "Telematik" for the
automatic extension of the boom to the desired length
60 m
max. 31 t
68,1 m
variable application spectrum with 112.5, 87.5 , 75 t, 50 or
25 t counterweight, hoist gear 2 and 3 pinned to the
counterweight base frame, very easy mounting procedure
diesel-hydraulic crane drive with 3/4 variable
displacement pumps, closed oil circuits for hoist gear,
slewing gear and jib luffing winch, open oil circuits for
luffing and telescoping, electronic crane control
spacious, comfortable crane cab, tiltable backwards by 20°,
modern interior design, crane cab is swivelled to the rear for
road transport
51.2 m
46.1 m
7-section, 84 m long telescopic boom for 84 m height
under hook
4-section, 50 m long telescopic boom for 50 m height
under hook
fixed or luffing jib of 14 m - 91 m, also in conjunction with
the guyed telescopic boom for increased lifting capacity,
max. under-hook height 140 m
20.2 t safe working load on the 84 m long telescopic boom
37 t safe working load on the 78.6 m long, guyed telescopic
boom
oviform, wide boom profile of outstanding stability, also in
the neutral axis; system of extreme torsional rigidity,
particularly designed for long auxiliary jibs, internal
interlocking system of telescopes
proved rapid-cycle telescoping system ”Telematik” for the
automatic extension of the boom to the desired length
max. 20,2 t
78,6 m
variable application spectrum with 180 t, 150 t, 120 t, 90 t,
60 t or 30 t counterweight
62,9 m
diesel-hydraulic crane drive with 8 variable displacement
pumps, electronic control, closed oil circuits for hoist gear,
slewing gear and jib luffing winch, open oil circuits for
luffing and telescoping
spacious, comfortable crane cab with new interior design,
tiltable backwards by 20°, the crane cab must be swivelled to
the rear for road transport
3 self-manufactured hoist winches of 126 kN linepull and
130 or 145 m/min rope speed
57,7 m
up to 3 self-manufactured hoist winches of 105 kN line
pull and 130 m/min rope speed
52,5 m
LICCON system – a Liebherr design – the most modern,
programmable computer system world-wide for the control
and monitoring of mobile cranes
compact, 8-axle carrier, drive/steering 16 x 8 x 14 (optional)
LICCON computer system with new high-performance central
unit (32 bit computer)
40.9 m
47,3 m
compact, 6-axle carrier, variable drive/steering concept
12 x 8 x 10 (optional)
operative weight 96 t (8 x 12 t axle load), incl. 50 m long
telescopic boom
operative weight 72 t (6 x 12 t axle load)
35.7 m
42,1 m
”Niveaumatik”, the crane and road preserving suspension
system, fully automatic levelling of the crane during the
supporting procedure by means of push-button control
interlinkage of the electric and electronic components of the
carrier and crane by most modern data bus transfer
technique (LSB = Liebherr System Bus), distinctive increase
of functionality and efficiency
for the carrier drive Liebherr turbo-charged Diesel engine of
440 kW output, exhaust emission acc. to EURO 2, electronic
engine management with data bus technique, Allison automatic transmission with electronic transmission management
for the crane drive: Liebherr turbo-charged Diesel engine of
180 kW output (IMO 1), installed crossways to the driving
direction, electronic engine management by data bus
technique
30.5 m
25.4 m
driving cab with ergonomical and functional design
”Niveaumatik”, the crane and road preserving suspension
system
LSB
36,9 m
interlinkage of the electric and electronic components of the
carrier and superstructure by modern data bus transfer
technique (LSB = Liebherr System Bus), distinctive increase
of functionality and efficiency
for the carrier drive:
Liebherr turbo-charged Diesel engine of 440 kW output,
exhaust emission acc. to EURO 2, electronic engine
management with data bus technique
for the crane drive:
Liebherr turbo-charged Diesel engine of 240 kW output,
electronic engine management by data bus technique
31,7 m
driving cab with ergonomical and functional design
26,5 m
20.2 m
21,3 m
15 m
16,1 m
Mobile crane type LTM 1300/1
10
Mobile crane type LTM 1500
11
The successful
boom technology
of Liebherr.
Subject to modification.
Please contact
LIEBHERR-WERK EHINGEN GMBH, D-89582 Ehingen
콯 (0 73 91) 5 02-0, Fax (0 73 91) 5 02-3 99
www.lwe.liebherr.de, E-mail: info@lwe.liebherr.com
TP 248 d. 6.00
The better crane.