1.
The susceptibility of equipment to deterioration by corrosion, fatigue and cracking is established by:
a)
Process fluid, contaminants and aggressive components.
b)
Design conditions of the facility.
c)
Ability to predict the deterioration methods.
d)
2.
3
4.
Inspection data from previous observation, as well as any non-implemented mitigating
recommendations.
Inspection does not directly reduce risk, but it is a risk management activity that may lead to:
a)
Risk interpretation
b)
risk reduction
c)
risk identification
d)
risk mitigation
This is a systematic decision to accept the combination of the probability of an event and its consequence. It depends
on risk criteria.
1.
ISO line.
2.
Risk acceptance.
3.
Risk avoidance.
4.
Risk communication.
RP580 is intended to do several things. Which of the following is not an included in this RP?
6.
a)
How to sustain an RBI program.
b)
What are the key elements of RBI
c)
How to implement an RBI program.
d)
How to evaluate an RBI software package.
To what degree of training should an RBI team member attain?
a)
OSHA suggests a minimum of eight hours of CBT (computer based training)
b)
As determined by the Team Leader
c)
As determined by Management and Safety Personnel
d)
7
8.
Enough training to attain an understanding and effective application of RBI.
Process to find, list and characterize sources. In a safety area, this is called a hazard.
a)
Risk identification.
b)
Source identification.
c)
Risk identification.
d)
Consequence identification
The premise for the RBI assessment could change and have a significant impact on the risk results. Some of the
possible changes could be:
a)
Increase or decrease in population density.
b)
Changes in the risk evaluation
c)
Alterations in the failure mode
d)
Relative risk resulting from an external event