Department of Education
Region I
Division of URDANETA City
Cluster 2
URDANETA I CENTRAL SCHOOL
Urdaneta City
Table of Specification in TLE 6 – Industrial Arts
FOURTH QUARTER
Learning Competencies
1.1 discusses the importance and methods of
enhancing/decorating bamboo, wood, and metal products
1.2 demonstrates creativity and innovativeness in
enhancing/ decorating bamboo, wood, and metal products
1.3 conducts simple survey using technology and other
data-gathering method to determine
1.3.1 market trends on products made of bamboo, wood,
and metal
1.3.2 customer’s preference of products
1.3.3 types/sources of innovative finishing materials,
accessories, and designs
1.3.4 processes in enhancing/decorating finished products
NUMBER
OF ITEMS
ITEM
PLACEMENT
10
1-10
%
Percentag
e
20
5
11-15
10
10
16-26
20
10
27-35
20
1.4 discusses the effects of innovative finishing materials
and creative accessories on the marketability of products
1.5 enhances bamboo, wood, metal, and other finished
products through sketching, shading, and outlining
1.6 constructs project plan
1.6.1 considers deliberate policies on sustainable
development in constructing the project plan
1.6.2 demonstrates resourcefulness and management skills
in the use of time, materials, money, and effort
1.6.3 assesses the quality of enhanced product using
rubrics
1.6.4 refines product based on assessment made
1.7 markets products
1.7.1 applies creative packaging and labeling techniques
1.7.2 applies technology-assisted and other means of
product marketing
1.7.3 computes income from sales
1.7.4 prepares plans for mass production or creating new
product
2.6 construct simple electrical gadgets
2.6.1 identifies the materials and tools needed in making
simple electrical gadgets.
2.6.2 identifies simple electrical gadgets and their uses
(extension cord, door bell, plugs, lampshades, etc).
2.6.3 observes safety and health practices in making
gadgets .
2.7 explains the protocols (processes) in making electrical
gadgets
3.1.1 Gathers data on how to do simple repairs using
technology or other methods.
3.1.3 Assesses repaired gadgets/furniture/furnishing as to
its reusability and functionality using rubrics.
.1.4 Improves repair undertaken
4.1.1 SAorting (seri)
4.1.2 Straigthening ( Seiton)
4.1.3 Systematic Cleaning (Shine, Seiso)
4.1.4 Standardizing ( Seiketsu)
4.1.5 Service Sustaining (Shitsuke)
4.2 Identifies recyclable products/wasdte materials made
of wood, metal, paper, plastic, and others.
4.4 Recycles the identified products/waste material into
functiuonal items(binding of used paper into notebook or
memo pad; bottled plastic into lamsheds,flowers, planmts
etc.
TOTAL
Prepared by:
5
36-40
10
5
40-45
10
5
45-50
10
50
50
100
Reviewed and checked by:
JOEL P. PAVO
Teacher III
PELAGIO R. ORALLO
Master Teacher I
Noted:
DR. SALVACION G. TABELIN
Principal IV
Department of Education
Region I
Division of URDANETA City
Cluster 2
URDANETA I CENTRAL SCHOOL
Urdaneta City
Fourth Periodical Test in EPP/TLE 6 –( Industrial Arts)
Name: _________________________________________________ Score: ____________
Section: ________________________________________________ Date: _____________
Direction: Read and understand each question. Choose the correct answer by writing the letter on the space
provided before each number.
____ 1. Enhancing a product means ______ the appearance of the product?
a. improving
c. decorating
b. beautifying
d. all of the above
____ 2.Decorating the product may be done by putting ______ on the surface of the product.
a. drawing
c. finishes
b. accessories
d. all of the above
____ 3. One method of enhancing/decorating a product includes _______.
a. sketching
c. cutting
b. measuring
d. all of the above
____ 4. It is the process of whitening or removing color by exposing to sunlight and air or with the use of chemical
solutions.
a. scraping
c. bleaching
b. pyrography
d. dyeing
____ 5. It is an art or process of producing designs or surfaces by burning or scorching with hot instruments.
a. scraping
c. bleaching
b. pyrography
d. dyeing
____ 6. This is the process in which one kind of wood is cut and used as a design on another piece of wood.
a. staining
c. coal blacking
b. bleaching
d. inlaying
____ 7. The process of coloring the wood to produce the desired color is _____.
a. dyeing
c. staining
b. coal blacking
d. bleaching
____ 8. This is a method of polishing copper and brass until they shine very bright.
a. draw filing
c. electroplating
b. buffing
d. bending
____ 9. This is used in making baskets, split tiles for furniture , musical instruments and creative articles.
a. bamboo
c. wood
b. metal
d. ceramic
____ 10. The resinous substance that comes from the excretion of the lac bug is ____.
a. paint
c. lacquer
b. shellac
d. turpentine
____ 11. It is a colorless volatile essential oil used as solvent for oil paint.
a. paint
c. lacquer
b. shellac
d. turpentine
____ 12. This finishing material is made of paper covered with sand or any abrasive material.
a. shellac
c. paint
b. sandpaper
d. lacquer
____ 13. In _______, innovations made in electroplating saves various aluminium products from the effects of
corrosion.
a. bamboo
c. metal
b. wood
d. ceramic
____ 14. The ease of selling a product or demand for the product.
a. innovative
c. market trends
b. marketability
d. buy and sell
____ 15. It means gathering information in order to understand your customer’s preference regarding your
products.
a. pricing
c. promotions
b. market survey
d. products
____ 16. It is a part of marketing program that makes use of flyers, brochures, signboards, calling cards,
broadcasting or internet.
a. pricing
c. location
b. product
d. promotions and advertising
____ 17. It tells whether the product is beautiful and durable.
a. quality
c. durability
b. acceptability
d. cost
____ 18. The product that should be made of high quality materials to ensure that it will last long and will not easily
break. What factors in customer’s preference is it?
a. quality
c. durability
b. acceptability
d. cost
____ 19. _______ are small accessories of different colors used to make products attractive.
a. paper twines
c. abaca
b. beading supplies
d. sinamay fiber
____ 20. One of the principles of basic designing a product is based on______.
a. its decoration
c. selecting the best materials
b. its functionality
d. the application of techniques
____ 21. ______ is a drawing in which only the contours of a product are seen, thus emphasizing the shape of a
design.
a. sketching
c. outlining
b. shading
d. carving
____ 22. Free hand drawing on the surface of the product.
a. sketching
c. outlining
b. shading
d. carving
____ 23. It is the process of removing lint and rough edges on wood.
a. sketching
c. carving
b. smoothening
d. shading
____ 24. Creating shades of lights and dark patterns in a composition or design.
a. sketching
c. outlining
b. shading
d. carving
____ 25. It involves thinking what to do and how to go about making the project.
a. planning
c. evaluating
b. monitoring
d. marketing
____ 26. It is the process of checking whether the project followed the standards in making a good quality project.
a. planning
c. evaluating
b. monitoring
d. marketing
____ 27. The bases for evaluating a project are the _______ found in the scorecard for judging a finished product.
a. criteria
c. standards
b. statements
d. all of the above
____ 28. The part of the project plan that shows the step by step process in the construction of a project refers to
______.
a. materials and tools
c. sketching
b. procedure
d. tools
____ 29. Also a part of the project plan where materials and tools are indicated.
a. materials and tools
c. sketching
b. procedure
d. bills of materials
____30. In planning your project for finished products, you must know how to be resourceful in using ______.
a. time
c. money
b. materials
d. all of the above
____ 31. The packaging should adhere to the rules of disposal. Waste reduction must be the top priority when it
comes to packaging. What packaging requirement does it shows?
a. durability
c. disposability
b. appearance
d. cost
____ 32. Packaging materials must withstand the distribution stresses that may be encountered. What packaging
requirements it is?
a. protection
c. appearance
b. durability
d. cost
____ 33. This is a marketing strategy use in promoting the finished products through the internet, e-mail and
social networking sites.
a. print media
c. internet marketing
b. product display
d. all of the above
____ 34. Finished product can be marketed in print advertisements such as newspapers, magazines, brochures
and flyers.
a. print media
c. internet marketing
b. product display
d. all of the above
____ 35. It refers to the proceeds earned after expenses for productions and operations are deducted.
a. sales
c. income
b. profit
d. capital
____ 36. ______ refers to the proceeds from selling the products.
a. sales
c. income
b. profit
d. capital
____ 37. The formula in computing income from sales is ________.
a. total income + capital = profit
c. total income x capital = profit
b. total income – capital = profit
d. total income /capital = profit
____ 38. It is a planning ideas for mass production that enhance packaging and distribution or selling. It includes
adapting to current trends.
a. budget planning
c. product planning
b. market planning
d. all of the above
____ 39. When preparing a plan for mass production, you have to consider the following questions:
I. Is the market for the product an expanding one?
II. Does the product gives you an advantage over your competitors, such as in price, function or use?
III. Are the raw materials sufficiently available at a reasonable amount?
a. I and II only
c. II and III only
b. I and III only
d. I,II and III
____ 40. Used to drive in or remove screws that fasten electrical wires or other electrical accessories.
a. pliers
c. wire stripper
b. screwdrivers
d electric drill
____ 41. The tool used to remove the insulation from a wire, usually to enable the wire to be spliced or connected
to gadgets or other electrical devices.
a. pliers
c. wire stripper
b. screwdrivers
d electric drill
____ 42. The tool used for bending wires in order to make loops.
a. diagonal pliers
c. side-cutting pliers
b. long-nose pliers
d. mechanical pliers
____ 43. This material is where you connect the male plug of your appliance in order to get electrical power.
a. flat cord
c. male plug
b. doorbell
d. convenience outlet
____ 44. A material used for allowing the current flow in getting electrical power.
a. switch
c. male plug
b. receptacle
d. convenience outlet
____ 45. It is a small electrical or electronic device with a practical use.
a. insulator
c. switch
b. voltage
d. gadget
____ 46. This is a simple electrical gadget where you can plug your electrical appliance in order to run.
a. extension cord
c .buzzer
b. lampshade
d. plugs
____ 47. An electrical device that rings when the electrical circuit is activated by the switch.
a. extension cord
c. buzzer
b. lampshade
d. plugs
____ 48. This is an electrical device used for lightning an area when reading or controlling the light in the room.
a. extension cord
c. buzzer
b. lampshade
d. plugs
____ 49. To avoid injury or electrocution, it is the best precaution to observe.
a. industry
c. silence when working
b. safety precaution
d. value of making electrical gadget
____ 50. In making gadgets, ________all exposed wires at the service cord.
a. cut
c. loop
b. braid
d. Insulate
****************************************************************************************************************
THANK YOU AND GOOD LUCK!!!!!!
Prepared by:
Reviewed and checked by:
JOEL P. PAVO
Teacher III
PELAGIO R. ORALLO
Master Teacher I
Noted:
DR. SALVACION G. TABELIN
Principal IV
ANSWERS KEY (TLE 6 – Industrial Arts)
1. A
2. B
3. A
4. C
5. B
6. D
7. C
8. B
9. A
10. B
11. D
12. B
13. C
14. B
15. B
16. D
17. A
18. C
19. B
20. B
21. C
22. A
23. B
24. B
25 A
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
C
A
B
A
D
C
B
C
A
C
A
B
C
D
B
C
B
D
C
D
A
C
B
B
D