Rust Preventive Tectyl RP 361(HKMC) Oily Film, Low Smell, Long-Term indoor Protection, Thixotropic Film MIL-C-16173 D GRADE 3, P-3 TYPE, KSM2212 KP-3 | INTRODUCTION | ------------------------------------------ | FEATURES | -------------------------------------------------------- Tectyl Thin transparent oily film giving long term protection. RP 361(HKMC) is solvent cut-back rust | FEATURES | -------------------------------------------------------- preventive, has the property of dewatering and coat the Long lasting film provides protection period for about 8 - ferrous 10 months indoors protection. High resistance to salt water, with Transparent Greasy Film. Good Solution stability, mild odor. Various application methods of dipping, spraying, and Easily removed by aqueous cleaners. brushing. No harmful materials like specific chemicals, and less body or non-ferrous metal surface with an economical, soft oily type, and long-lasting rust protecting film. Tectyl RP 361(HKMC) is easily removed by not only solvent cleaners but also alkali cleaners. Tectyl RP harm. | APPLICATION | --------------------------------------------------- 361(HKMC) is can be easily applied to the KD parts that | APPLICATION | --------------------------------------------------- require degreasing on next process. Long term protection of tool, machinery, bearing, spare | PHYSICAL PROPERTIES | --------------------------------Appearance Amber Naked Eyes 0.81 ASTM D 1298 45 ASTM D 56 2.4 ASTM D 445 Pass MIL-C-22235A Specific gravity (15/4℃) Flash Point (℃) Kinetic viscosity (cSt, 40℃) Oil Stain (82℃X24hrs) - All data given in this Product Data Sheet are typical of this Product. It does not however constitute a specification. And, We reserve the right to modify products without prior notice | PROTECTION PERIOD | ---------------------------------- part, roller. and etc. Protection for automobile parts, piston pin, pin rod, etc. Protection for the area when Galvanic Corrosion is Long term indoor protection of Tool, Gauge, Die, etc. expected. Protection for medium/long term indoor storage (Bearing, Protection of automobile parts for international shipping. Chain, Value) Protection for Wire and Tube. Protection for machinery not used. Protection of Wire, Tube, etc. | How to Use | ------------------------------------------------------ Protection of KD and exporting parts. Dip, Spray, Brush. (Recommended Temp, 10~35℃) | HOW TO USE | -------------------------------------------------- Clean parts before applying. Do not dip when parts are hot. Dip, Spray, Brush. (Recommended Temp, 10~35℃) When Spray, keep low pressure. Clean parts before applying. Use tank designed to drain and remove water regularly. Do not dip when parts are hot. Ventilate an area and be careful about fire on site. When Spray, keep low pressure. Minimize evaporation of solvent from tank. Use tank designed to drain and remove water regularly. Ventilate an area and be careful about fire on site. Condition Period(mon) Mild 10 ~ 12 Normal 8 ~ 10 Severe Not e.g. Relative humidity below 60% Tank/Lorry, Tote, Drum(200LT), Pail(20LT) | PACKING & SAFETY | ------------------------------------------ For your Safety, Refer to the Material Safety Data Sheet, Non-ventilated warehouse, Plant Tank/Lorry, Tote, Drum(200LT), Pail(20LT) Exposed For your Safety, Refer to the Material Safety Data Sheet, outdoor storage - Above rust protection period may differ depending on working environment, surface condition, storage method and climate etc. TECTYL Website : www.tectylasia.com | Packing & Safety | ------------------------------------------------ Minimize evaporation of solvent from tank.