Yasir Iqbal Yasiriqbal312@gmail.com +923135961196 Member Pakistan Engineering Council (PEC) – Civil/28248 Design Engineer (Infrastructure) with more than 14 years of professional experience in the field of design and construction of infrastructure development projects. Well-versed with international standards like AASHTO-LRFD, West Pakistan Highway codes, and AISC & ACI codes. RESEARCH SKILLS I am confident in the areas of dynamic analysis of bridges and high-rise buildings. My M.Sc. research work is composed of analyzing and comparing the live load effects caused by different vehicles/Trucks specified in the aforementioned codes against a number of lanes and span length. The research included a comparison and deep study of several parameters essential to be considered for designing and analyzing highway bridges. As a member of the Structural evaluation team; conducted site visits in earthquake-affected areas in 2005 including five districts of KP and AJK. Based on data collected from the site, the future fate of a particular structure is decided; whether it should be repaired, retrofitted, or abandoned. The field observations and recommendations were compiled in the form of a comprehensive report. Various types of buildings were investigated including educational, health, agriculture, and governance buildings. Designing Skills Seismic analysis of bridges and high-rise buildings. Finite Element Modeling. Static & Dynamic Analysis of Structures. Soil Structure Interaction. Design of Steel Structures. Pre-Stressed Concrete design RCC and Masonry Structures. Computer Skills AUTOCAD STRUCTURE DETAILING SAP 2000 / SAFE / ETABS / CIVIL 3D CSI Bridge CONCISE BEAM MS OFFICE / MS PROJECT HEC-HMS / HEC-RAS / GIS EDUCATION M.Sc. Civil Engineering (18 years of Education) CECOS University of IT and Emerging Sciences, Peshawar, 2021 Thesis Title: Investigation of extreme stresses due to different vehicular live load models on the superstructure of highway bridges”. (AASHTO-LRFD vs Code of Practice for highway bridges in Pakistan) B.Sc. Civil Engineering ( 16 years of Education) from University of Engineering and Technology Peshawar, 2008 Thesis Title: Analysis, and design of reinforced concrete and post-tensioned girders. FOR PSU I can deliver tutorials and Practical exercises to undergraduate and postgraduate students in the lab. I can contribute to the research work by working with the team, aiming to publish my M.Sc. research work discussed later in this CV. As I have both research and applied experience so willing to write a proposal, providing consultancy to the client from the PSU platform. EMPLOYMENT RECORD M/s Consulting Associates - Senior Engineer Structures 1st September 2013 – till Date, Peshawar Pakistan Responsibilities Assist Structure Engineer in all designing works including designing of bridges, aqueducts, siphons, and other relevant structures. Complete designing of frame structures by using ACI and Pakistan Building codes. Modeling of all kinds of structures in SAP-2000. Hydraulic design of components of Dam and weirs. Monitoring, the progress of all projects with the employer on a monthly basis. Attend meetings with Clients, donors, and contractors relating to the issues in the project. Assist Road and Water sector Specialists in all office works Preparation of Milestones for different roads and dams (Fata). Preparation of Monthly progress reports. Biweekly Reports. Verification of PC-1 quantities and rates by detailed estimation of various bills and comments preparation relating to the subject project e.g., bridges, roads, and weirs. Site visit to project areas for verification of bills. Material testing on-site e.g., Proctor tests, sieve analysis, and other prescribed by senior specialists. Verification of escalation bills. Take immediate decisions on-site to avoid any hamper and delays in construction. National Engineering Service Pakistan (c)- Junior Engineer 31st January 2009 – 31st August 2013, Islamabad Pakistan www.nespak.com.pk Responsibilities Overall, in charge of 2 sites by supervising the construction of a 50-kilometer road in a hilly area. Carry out lab testing of soil, stones, sands, concrete, and steel, prior to road construction; quality and quantity test of sand, cement, crush, and earthwork during the road construction. Practical application of tender drawing including steel formwork and all type of concrete structures. Take immediate decisions on site in order to avoid any hamper and delays in construction progress. Supervised all surveying work. Verification of contractors’ bills and Escalation bills. Managing and supervising supporting staff i.e., lab technicians, surveyors, and inspectors LIST OF COMPLETED PROJECTS Design of Earthquake resistant buildings 03 No shopping malls (Plazas) Ground + four stories Fatimid Foundation office D I Khan Basement + Three stories Jabori Hydropower Colony having different types of residential apartments Karora Hydropower Colony having different types of residential apartments Government girls’ primary school Chitral Ground + Three stories Around 15 standard modules for Education Sector Middle (Junior High) schools (various designs) Primary Schools (various designs) High schools (various designs) Degree Colleges Around 10 standard buildings for Governance Sector Water tank for High Court Peshawar (Abbottabad Bench) Potato Research Institute (Mansehra) Design of steel frame and truss canopy for solar systems Design of Gas Insulated Switchgear GIS (Steel Structure) Building for WAPDA Design of RCC water tanks Design of Post-tensioned slabs as per ACI codes Design of Bridges I have Completed the structure design of 06 No post-tensioned I girder bridges using Csi-bridge and manual calculation (Communication and Works) Design of Retrofitting of Multi Column Bent by CFRP and Column Jacketing Technique for various bridges in Chitral Completed structural design of the Post-tensioned I girder bridge Sigram Swat The complete structural design of the Post-tensioned I girder bridge on Tochi River North Waziristan (8-No spans) Design of 02 No Post tension Box girder bridge in newly merged districts of Kpk Structural design vetting of Post-tensioned I girder bridge in the newly merged district of Kpk Khyber (Communication and Works) Design of RCC T-beam bridges up to the span of 12 meters for South Waziristan Design of 2 No RCC Causeways of span 200 meters and 120 meters for Newly Merged Districts of KPK Design of 2 No of Steel Suspension bridges of span 50 meters and 75 meters for Newly merged Districts of KPK Design of RCC Slab bridges up to the span of 7 meters to 10 meters Design of simply supported I-Beam steel bridges for Chitral Structure Design of Underpass from Havellian to Dhamtour Bypass Design of Allied Structures Design of 10-meter high RCC counterfort Retaining wall Design of RCC Cantilever retaining walls Design of 5 meters to 7-meter stone masonry, plum concrete, and gabion walls Design of 06 No Multi-box RCC culverts of span 3 meters to 4 meters Design of Simply supported Slab bridges with stone masonry abutments up to the span of 2 meters to 3 meters Aqueduct design of 15 meters span with RCC Piers and abutments Design of RCC channels. Hydrological design of bridges Hydrologic studies including water availability and flood frequency analysis of Irrigation, Small Dams, and Hydro Power Projects. Hydraulic design of Small Dams, Irrigation, and Hydro Power Projects and their allied Structures. Reservoir operation modeling and energy calculation including peaking and off-peaking for hydropower projects. HEC RAS modeling for Flood routing, River Long section, X-sections, and their Rating Curves. Hydrological and sedimentation analysis using GIS. PUBLICATIONS Extreme stresses in the substructure of highway bridges due to different vehicular load models used for Pakistan (pipeline) Reliability Assessment of Seismic Retrofitted Beams Using Carbon Fiber Reinforced Polymer (CFRP) technique (pipeline). Developing live load models for the design of highway bridges in Pakistan (pipeline)