Standards Manager Web Standards List WRC-Welding Research Council Id 1 Number 588 2 3 4 5 6 7 8 9 10 11 589 576 577 582 584 546 556 558 564 537 12 13 14 15 16 541 489 503 569 554 17 18 19 550 575 572 20 573 21 22 23 24 25 26 27 28 29 30 31 32 574 570 571 562 566 568 552 553 557 555 561 539 Title Development and Use of a Simple Test Method to Evaluate Reheat Cracking Sensitivity in the Weld Deposit Region of a Submerged Arc Weld Recognition of UNS K91201 (Grade T/P 921 9Cr-2Si-1Cu) Alloy in API 579-1/ASME FFS-1and API Std 530 Recognition of UNS K91060 (Alloy 115, aka T115) Alloy in API 579-1/ASME FFS-1 and API Std 530 Constraint Effects on Fracture Toughness in the Ductile-Brittle Transition Region Recognition of UNS S34752 (Advanced 347 AP) Alloy in API 579-1/ASME FFS-1 and API Std 530 Overview of API 579-1/ASME FFS-1 With an Emphasis on Data and Inspection Requirements Guidelines for the Approval of New Materials in WRC Bulletin 541, API Std 530, and API 579-1/ASME FFS-1 Repair Manual for Coke Drums Recognition of UNS S34751 (347LN, aka 347AP) Alloy in API 579-1/ASME FFS-1 and API Std 530 - 2nd Edition The MPC Lot-Centered Analysis Method for Determining High Temperature Strength Parameters Precision Equations and Enhanced Diagrams for Local Stresses in Spherical and Cylindrical Shells Due to External Loadings for Implementation of WRC Bulletin 107 Evaluation of Material Strength Data for Use in API Std 530 - 3rd Edition Damage Mechanisms Affecting Fixed Equipment in the Refining Industry Compendium of Temperature-Dependent Physical Properties for Pressure Vessels, Piping and Tankage Materials The Susceptibility of Process Equipment and Steels to Cracking in Aqueous Hydrogen Charging Environments The Valid Stress Range for the MPC Omega Model in API 579-1/ASME FFS-1 2016 and the Creep Rupture Model in WRC 541 Standardization of Fatigue Methods for Use in API 579-1/ASME FFS-1 Revisiting the Bree Diagram: Derivation with Temperature Dependent Properties Characterization of Crack Surface Morphology of Reheat and Hydrogen Assisted Cracks in Submerged Arc Weld Deposits of 2-1/4Cr-1Mo-V (22V) Steels Effects of Heat Treatment and Chemical Composition on High Temperature Hydrogen Attack Resistance of C-1/2 Mo Steels Compendium of High Temperature Hydrogen Attack (HTHA) Damage in C-1/2 Mo Steel Fundamental Studies of Hydrogen Attack in C-0.5Mo Steel and Weldments Incorporation of Structural Reliability Methods into Fitness for Service Procedures Recommendations for Establishing the Minimum Pressurization Temperature (MPT) for Equipment Guidelines for Repair Welding of Pressure Equipment in Refineries and Chemical Plants - Second Edition Current Concepts for Life Assessment of Pressure Vessels and Piping Calculation of Weld Residual Stresses and the Effects of Local Post-Weld Heat Treatment Weld Residual Stress Estimate for FFS Assessment and Evaluation of Local PWHT Procedures Buckling and Post Buckling of Plate Girders in Bending A Comparison of Criteria for Acceptance of Risk Finite Element Analysis of Stress Rupture in Pressure Vessels Exposed to Accidental Fire Loading Fatigue, Tensile, and Relaxation Behavior of Stainless Steels Year Organization 2021 WRC 2021 2020 2020 2020 2020 2020 2020 2020 2020 2020 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 2020 2019 2019 2019 2019 WRC WRC WRC WRC WRC 2019 2019 2018 WRC WRC WRC 2018 WRC 2018 2018 2017 2017 2016 2016 2016 2016 2016 2015 2015 2015 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC Page 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 Development of Revised Weld Residual Stress Guidance for Fitness-For-Service Assessments in API 579-1 - ASME FFS-1 (2015) 540 Constraint Effects on Fracture Toughness in the Ductile-Brittle Transition Region 538 Determination of Pressure Boundary Joint Assembly Bolt Loads 542 Stud and Nut Structural Tension Capacity Matching 543 Final Report - Laser Repair of Directionally Solidified Superalloys 544 Material Specific Load Combination Factors for Option 2 FAD Curves 545 Improvements in the Thinning Damage Factor Calculation Planned for the 3rd Edition of API RP 581 536 Service-Like Thermo-Mechanical Fatigue Characteristics of 1CrMoV Rotor Steel 547 Fitness-For-Service Evaluation Procedures for Operating Pressure Vessels, Tanks, and Piping in Refinery and Chemical Service 548 Fitness-For-Service Evaluation Procedures for Operating Pressure Vessels, Tanks, and Piping in Refinery and Chemical Service 537 Precision Equations and Enhanced Diagrams for Local Stresses in Spherical and Cylindrical Shells Due to External Loadings for Implementation of WRC Bulletin 107 541 Evaluation of Material Strength Data for Use in API Std 530 - 3rd Edition 537 Precision Equations and Enhanced Diagrams for Local Stresses in Spherical and Cylindrical Shells Due to External Loadings for Implementation of WRC Bulletin 107 533 The Role of Welded Joint Vulnerability and Various Damage Mechanisms Active in Process and Petrochemical Plants: Reliability Analysis with Risk Based Inspection (RBI) Approach 528 Development Of Material Fracture Toughness Rules For ASME B&PV Code Section VIII, Division 2 529 Development of Design Rules for Nozzles in Pressure Vessels for the ASME B&PV Code, Section VIII, Division 2 531 Development of Fitness-For-Service Rules for the Assessment of Hydrogen Blisters, HIC and SOHIC 523 The Master S-N Curve Method: An Implementation for Fatigue Evaluation of Welded Components in the ASME B&PV Code, Section VIII, Division 2 and API 579-1/ASME FFS-1 524 Modern Vanadium Steels for High Temperature Petroleum Reactors 525 Fabrication and Repair of Low Alloy Steel Pressure Equipment 526 Performance of Steels in Hydrogen Charging Environments 527 Practical Aspects Of Hydrogen Attack 520 Recommendations for Fatigue Design of Welded Joints and Components 521 Development of Design Rules for Conical Transitions in Pressure Vessels for the ASME B&PV Code, Section VIII, Division 2 532 Metallurgical Studies of Steels for Sour Service Environments 530 Test Methods for Hydrogen Induced Cracking 534 Studies of Cladding and Overlay for Pressure Vessel Service 535 Toughness, Fracture and Fitness for Hydrogen Service Vol LXIV 1-2 Progress Reports Vol LXIV 3-4 Progress Reports Vol LXIV 5-6 Progress Reports Vol LXIV 7-8 Progress Reports Vol LXIV 9-10 Progress Reports Vol LXIV 11- Progress Reports 12 Vol LXIII 1-2 Progress Reports 2015 WRC 2014 2014 2014 2014 2014 2014 2014 2014 WRC WRC WRC WRC WRC WRC WRC WRC 2014 WRC 2013 WRC 2011 2010 WRC WRC 2010 WRC 2010 2010 2010 2010 WRC WRC WRC WRC 2009 2009 2009 2009 2009 2009 WRC WRC WRC WRC WRC WRC 2009 2009 2009 2009 2009 2009 2009 2009 2009 2009 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 2008 WRC 68 69 70 71 72 73 74 75 76 77 78 79 80 81 Vol LXIII 3-4 Vol LXIII 5-6 Vol LXIII 7-8 Vol LXIII 9-10 Vol LXIII 1112 Vol LXII 1-2 Vol LXII 3-4 Vol LXII 5-6 Vol LXII 7-8 Vol LXII 9-10 Vol LXII 11-12 518 519 508 82 83 84 85 509 510 511 512 86 513 87 88 514 515 89 516 90 517 91 92 93 94 95 96 97 98 99 100 101 102 103 Vol LXI 1-2 Vol LXI 3-4 Vol LXI 5-6 Vol LXI 7-8 Vol LXI 9-10 Vol LXI 11-12 Vol LX 1-2 Vol LX 3-4 Vol LX 5-6 Vol LX 7-8 Vol LX 9-10 Vol LX 11-12 504 Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports 2008 2008 2008 2008 2008 WRC WRC WRC WRC WRC Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Mechanical Properties of Cast Strengthened Nickel Base Superalloys Stainless Steel Weld Metal Prediction of Ferrite Content: An Update of WRC Bulletins 318 and 342 Optimized/Harmonized Room Temperature Leakage Test Procedure for Generation of ASME & CEN Code Gasket Factors - Analytical Phase Weldability and Hot Ductility Behavior of Nuclear Grade Austenitic Stainless Steels Analysis of the Effects of Temperature on Bolted Joints High Performance Cast ' - Strengthened Nickel Based Superalloys - An Interpretive Report Creep and Creep/Fatigue Crack Growth Modeling and Testing Methods Relevant to Life Assessment of Cracked Components Effect of the Misalignment of Piping Systems and Non Parallel Flange Faces on the Tightness of DN200 PN40 Flanged Joints Improved Flange Design Method for the ASME VIII, Div. 2 Rewrite Project: Status of Present Design Methods Literature Survey of Half-Bead, Temper-Bead, Controlled Deposition Techniques for Improvement of Fabrication and Service Performance of Cr-Mo Steels 3D-Finite Modeling of Bolted Flanged Joints and Development of a Transducer for Measuring Gasket Contact Stress: Part 1 & Part 2 Examination of Mechanical Properties And Corrosion of High Temperature Alloys after Long Term Service under Advanced Power Plant Boiler Conditions - The Eddystone Studies Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Interpretative Report Hardfacing and Wear 2007 2007 2007 2007 2007 2007 2007 2007 2006 WRC WRC WRC WRC WRC WRC WRC WRC WRC 2006 2006 2006 2006 WRC WRC WRC WRC 2006 WRC 2006 2006 WRC WRC 2006 WRC 2006 WRC 2006 2006 2006 2006 2006 2006 2005 2005 2005 2005 2005 2005 2005 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 505 506 An Overview and Validation of the Fitness-For-Service Assessment Procedures for Local Thin Areas Half-Bead Temper-Bead Controlled Deposition Techniques for Improvement of Fabrication and Service Performance of Cr-Mo Steels 507 Long Term Pressurized Graphite Gasketed Joint Tests: Part 1, Part 2, & Part 3 498 Guidance on the Application of Code Case 2211 - Overpressure Protection by Systems Design 499 Literature Survey of Half-Bead, Temper-Bead, Controlled Deposition Techniques for Improvement of Fabrication and Service Performance of Cr-Mo Steels 500 Stress or Strain Criteria for Combined Static and Dynamic Loading 501 Design of Torispherical and Ellipsoidal Heads Subjected to Internal Pressure 502 Effect of Microfissures on Corrosion Performance and Mechanical Properties of Austenitic Stainless Steel Weld Metals 490 Damage Mechanisms Affecting Fixed Equipment in the Fossil Electric Power Industry 491 Interpretive Report on Dynamic Analysis and Testing of Pressurized Components and Systems - Sixth Edition 492 Piping System SIFs and Flexibility Analysis Criteria: Part 1 & Part 2 493 Guidelines for Modeling Cylinder-To-Cylinder Intersections 494 Fracture-Safe and Fatigue Design Criteria for Detonation-Induced Pressure Loading in Containment Vessels 495 Test Protocol Guidelines for Gasket Materials 496 Effect of Flange Rotation and Gasket Width on Leakage Behavior of Bolted Flanged Joints: Part 1, Part 2, & Part 3 497 Large Diameter Ratio Shell Intersections: Part 1, Part 2, & Part 3 488 Damage Mechanisms Affecting Fixed Equipment in the Pulp and Paper Industry 489 Damage Mechanisms Affecting Fixed Equipment in the Refining Industry Vol LIX 1-2 Progress Reports Vol LIX 3-4 Progress Reports Vol LIX 5-6 Progress Reports Vol LIX 7-8 Progress Reports Vol LIX 9-10 Progress Reports Vol LIX 11-12 Progress Reports Vol LVIII 1-2 Progress Reports Vol LVIII 3-4 Progress Reports Vol LVIII 5-6 Progress Reports Vol LVIII 7-8 Progress Reports Vol LVIII 9-10 Progress Reports Vol LVIII 11- Progress Reports 12 478 Stress Intensity And Crack Growth Opening Area Solutions For Through-Wall Cracks In Cylinders And Spheres 479 Simple Formulations to Evaluate Surface Impacts on Buried Steel Pipelines 480 Effects of Phosphorous and Sulfur on Susceptibility to Weld Hot Cracking in Austenitic Stainless Steels 481 The Effect of Post Weld Heat Treatment and Notch Toughness on Welded Joints and on Normalized Base-Metal Properties of A-516 Steel: Part 1 & Part 2 482 Special Finite Elements for Piping Elbows and Bends at High Temperatures with Creep 483 Creep Crack Growth: Assessment of Defects in High Temperature Components 484 Gasketed Joint Emissions and Leakage: Part 1, Part 2, & Part 3 485 Suitable Heating Conditions in Local Post Weld Heat Treatment 2005 2005 WRC WRC 2005 2005 2005 WRC WRC WRC 2005 2005 2005 2004 2004 2004 2004 2004 2004 2004 2004 2004 2004 2004 2004 2004 2004 2004 2004 2003 2003 2003 2003 2003 2003 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 2003 2003 2003 2003 WRC WRC WRC WRC 2003 2003 2003 2003 WRC WRC WRC WRC 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 486 Indexing Fracture Toughness Data; Part 1: Results from the MPC Cooperative Test Program on the Use of Precracked Charpy Specimens for T0 Determination; Part 2: Fracture Data Analysis using ASTM Standards E1921-97 and E1921-02; Part 3: Fracture Toughness D 487 PVRC'S Position on Environmental Effects on Fatigue Life in LWR Applications Vol LVII 1-2 Progress Reports Vol LVII 3-4 Progress Reports Vol LVII 5-6 Progress Reports Vol LVII 7-8 Progress Reports Vol LVII 9-10 Progress Reports Vol LVII 11-12 Progress Reports 468 Leak Testing of a Raised Face Weld Neck Flange 469 Crack-Starter Weld Bead Deposition for ASTM E-208 Drop-Weight Testing: Part 1 & Part 2 470 Recommendations for Design of Vessels for Elevated Temperature Service 471 Development of Stress Intensity Factor Solutions For Surface and Embedded Cracks in API 579 472 A Review of Methods for the Analysis of Buried Pressure Piping 473 External Bending Moments on Bolted Gasketed Joints: Part 1 & Part 2 474 Master S-N Curve Method for Fatigue Evaluation of Welded Components 475 Studies Of Local Differences In Material Creep Properties On Weldments: Part 1 & Part 2 476 Recommendations for Determining Residual Stresses in Fitness-For-Service Assessment 477 Design Of Pressure Vessels For High Strain Rate Loading: Part 1 & Part 2 107 Local Stresses In Spherical And Cylindrical Shells Due To External Loadings 458 Fracture Toughness Master Curve Development: Application Of Master Curve Fracture Toughness Methodology For Ferritic Steels 459 Fracture Toughness Master Curve Development: Strategies For RPV Assessment 460 High Temperature Cracking And Properties Of Stainless Steel Flux-Cored Welds And Effects Of Bismuth 461 Experimental Leak Testing of 16-Inch Class 300 RFWN Flange with and Without External Bending Moment 462 Commentary on the Alternative Rules for Determining Allowable Compressive Stresses for Cylinders, Cones, Spheres and Formed Heads for Section VIII, Divisions 1 and 2 463 Standardized Flexibility Factor Method And Piping Burst And Cyclic Moment Tests For Induction Bends And 6061-T6 And SS 304 Transition Joints: Part 1, Part 2, & Part 3 464 Guidelines For Sizing Of Vessels By Limit Analysis 465 Technologies for the Evaluation of Non-Crack-Like Flaws in Pressurized Components -- Erosion/Corrosion, Pitting, Blisters, Shell Out-Of-Roundness, Weld Misalignment, Bulges and Dents 466 Behavior of Bellows 467 Biaxial Thermo-Mechanical Fatigue Response of SS-316 Structures Vol LVI 1-2 Progress Reports Vol LVI 3-4 Progress Reports Vol LVI 5-6 Progress Reports Vol LVI 7-8 Progress Reports Vol LVI 9-10 Progress Reports Vol LV 1-2 Progress Reports Vol LV 3-4 Progress Reports Vol LV 5-6 Progress Reports 2003 WRC 2003 2002 2002 2002 2002 2002 2002 2002 2002 2002 2002 2002 2002 2002 2002 2002 2002 2002 2001 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 2001 2001 2001 2001 WRC WRC WRC WRC 2001 WRC 2001 2001 WRC WRC 2001 2001 2001 2001 2001 2001 2001 2000 2000 2000 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 179 180 181 Vol LV 7-8 Vol LV 9-10 448 182 183 184 449 450 451 185 186 187 188 189 190 452 453 454 455 456 457 191 438 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 439 440 441 442 443 444 445 446 447 Vol LIV 1-2 Vol LIV 3-4 Vol LIV 5-6 Vol LIV 7-8 Vol LIV 9-10 Vol LIV 11-12 Vol LIII 1-2 Vol LIII 3-4 Vol LIII 5-6 Vol LIII 7-8 Vol LIII 9-10 Vol LIII 11-12 428 429 430 Progress Reports Progress Reports Part 1: Evaluation of Welded Attachments on Pipe and Elbows: Background & Suggested Revisions ASME Code Cases N122-2 and N-318-5 Lugs on Straight Pipe; Part 2: Evaluation of Welded Attachments on Pipe and Elbows: Evaluation of Welded Attachments on Pipe Guidelines For The Design And Installation Of Pump Piping Systems NPS 4 Class 150 Bolted Flanged Joints Subjected To Pressure And External Bending Loads Internal Pressure Design Of Isolated Nozzles In Cylindrical Vessels With d/D Up To And Including 1.00: Report No. 1: Code Rules For Internal Pressure Design Of Isolated Nozzles In Cylindrical Vessels Recommended Practices For Local Heating Of Welds In Pressure Vessels Minimum Weld Spacing Requirements For API Above Ground Storage Tanks A Literature Review on Characteristics of High Temperature Ferritic Cr-Mo Steels and Weldments Recent Progress In Analysis Of Residual Welding Stresses: Part 1, Part 2, & Part 3 Heat Exchanger Flow Characterization - HXFLOW Software: Theory Manual And Users Manual Fracture Toughness Master Curve Development: Fracture Toughness Of Ferritic Steels And ASTM Reference Temperature (To) Intermetallic Phase Precipitation in Duplex Stainless Steels and Weld Metals: Metallurgy, Influence on Properties, Welding and Testing Aspects Part 1: Use of Low Carbon 1 1/4 Cr-1/2 Mo Weld Metal for Fabrication and Repair of Cr-Mo Components: Part 1 & Part 2 A Synthesis Of The Fracture Assessment Methods Proposed In The French RCC-MR Code For High Temperature Development Of A Comprehensive Static Seismic Analysis Method For Piping Systems Polytetrafluoroethylene (PTFE) Gasket Qualification External Pressure: Effect Of Initial Imperfections And Temperature Limits Buckling Criteria for Torishperical Heads Under Internal Pressure Plastic Pipe: Burst And Fatigue Testing Of PVC And HDPE Pipe: Part 1, Part 2, & Part 3 Design and Repair of Buried Pipe Evaluation of Operating Margins for In-Service Pressure Equipment Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Unmixed Zone in Arc Welds: Significance on Corrosion Resistance of High Molybdenum Stainless Steels 3D Stress Criteria Guidelines for Application Review of Existing Fitness-For-Service Criteria for Crack-Like Flaws 2000 2000 2000 WRC WRC WRC 2000 2000 2000 WRC WRC WRC 2000 2000 2000 2000 2000 2000 WRC WRC WRC WRC WRC WRC 1999 WRC 1999 1999 1999 1999 1999 1999 1999 1999 1999 1999 1999 1999 1999 1999 1999 1998 1998 1998 1998 1998 1998 1998 1998 1998 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 216 431 217 218 219 432 433 434 220 221 222 435 436 437 223 224 225 226 227 228 229 230 231 418 419 420 421 422 423 424 425 426 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 427 Vol LII 1-2 Vol LII 3-4 Vol LII 5-6 Vol LII 7-8 Vol LII 9-10 Vol LII 11-12 248 249 250 251 252 410 411 412 413 414 Vol LI 1-2 Vol LI 3-4 Vol LI 5-6 Vol LI 7-8 Vol LI 9-10 Vol LI 11-12 408 409 Part 1: Summary of Gasket Steam Leakage Tests: Gasket Steam Leakage Tests; Part 2: Summary of Gasket Steam Leakage Tests: Leak Tests Conducted on Graphite Gaskets; Part 3: Summary of Gasket Steam Leakage Tests: Long Duration Air and Steam Screening Tests Fatigue Strength Reduction and Stress Concentration Factors for Welds in Pressure Vessels and Piping: Part 1 & Part 2 Fatigue of Butt-Welded Pipe and Effect of Testing Methods: Part 1 & Part 2 Design and Inservice Margins of Power Piping Systems: A Comparative Study of U. S., Canadian and European Codes & Standards Evaluation of Design Margins for Section VIII, Div. 1 and 2 of the ASME Boiler and Pressure Vessel Code: Part 1 & Part 2 Evaluation of Small (r/R<0.5) Branch Connections with Through-Run Moments: Part 1 & Part 2 Assessment, Sample Problems and Commentary on Design for Section III, Division 3 (NUPACK) of the ASME Boiler and Pressure Vessel Code Constraint Effects On Fracture Behavior: Part 1, Part 2, & Part 3 Elevated Temperature Characterization of Flexible Graphite Sheet Materials for Bolted Flanged Joints Interpretive Report on Nondestructive Examination Techniques, Procedure for Piping and Heavy Section Vessels Welding Type 347 Stainless Steel - An Interpretive Report Fatigue of Welded Components Evaluation of Seismic Response Data for Piping Bibliography of the Welding Research Supplements of the Welding Journal from 1950-1996 A Review of Methods for the Analysis of Buried Pressure Piping Differential Design And Construction Cost Of Nuclear Power Plant Piping Systems As A Function Of Seismic Intensity And Time Period Of Construction Leakage and Emission Characteristics of Sheet Gaskets: Part 1 & Part 2 Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports International Conference on Performance of Dynamically Loaded Welded Structures Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Bolted Flange Assembly: Preliminary Elastic Interaction Data and Improved Bolt-Up Procedures Fundamental Studies of the Metallurgical Causes and Mitigation of Reheat Cracking in 1 1/4 Cr-1/2 Mo and 2 1/4 Cr-1Mo Steels Evaluation of Design Criteria for Storage Tanks with Frangible Roof Joints An Experimental Study of Causes and Repair of Cracking of 1 1/4 Cr-1/2 Mo Steel Equipment Challenges and Solutions in Repair Welding for Power and Process Plants Development of Criteria for Assessment of Reactor Vessels with Low Upper Shelf Fracture Toughness: Part 1 & Part 2 A New Design Criterion Based on Pressure Testing of Torispherical Heads 1998 WRC 1998 1998 1998 WRC WRC WRC 1998 1998 1998 WRC WRC WRC 1997 1997 1997 1997 1997 1997 1997 1997 1997 WRC WRC WRC WRC WRC WRC WRC WRC WRC 1997 1997 1997 1997 1997 1997 1997 1997 1996 1996 1996 1996 1996 1996 1996 1996 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 1996 1996 1996 1996 1996 WRC WRC WRC WRC WRC 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 415 Literature Survey and Interpretive Study on Thermoplastic and Reinforced-Thermosetting-Resin Piping and Component Standards 416 Creep Crack Growth Behavior in Weld Metal/Base/Metal/Fusion Zone Regions in Chromium Molybdenum Steels 417 Design Guide to Reduce Potential for Vibration Caused by Fluid Flow Inside Pipes - Review and Survey 398 Reduction of S-N Curves for Ship Structural Details 399 The Influence of Consumable Composition and Solidification on Inclusion Formation and Growth in Low Carbon Steel Underwater Wet Welds 400 Interpretive Report on Weldability Tests for Hydrogen Cracking of Higher Strength Steels and Their Potential for Standardization 401 Underwater Wet Welding Of Steel 402 Creep-Fatigue Damage Assessment in Type 316 Stainless Steel Under Uniaxial and Multiaxial Strain Cycling At 1150 Degrees F 403 Part 1: Metallurgical Characterization of the HAZ in A516-70 and Evaluation of Fracture Toughness Specimens and the Effect of Shallow Cracks in Weldments and the Development of CTOD Criteria; Part 2: Comparison of the CTOD Fracture Toughness of Simulated 404 Fatigue Crack Growth of Low-Alloy Steels in Light Water Reactor Environments: Report 1, Report 2, & Report 3 405 Effect of Heat Treatment on the Elevated Temperature Properties of a 2 1/4Cr-1Mo Submerged Arc Weldment 406 Proposed Rules for Determining Allowable Compressive Stresses for Cylinders, Cones, Spheres and Formed Heads 407 Reports on Heat Treatment of Steels Used in Boiler and Pressure Vessel Applications: Part 1 & Part 2 Vol L 1-2 Progress Reports Vol L 3-4 Progress Reports Vol L 5-6 Progress Reports Vol L 7-8 Progress Reports Vol L 9-10 Progress Reports Vol L 11-12 Progress Reports 388 Research in the U.S.S.R. on Residual Stresses and Distortion in Welded Structures 389 Part 1: Vibration Damping of Heat Exchanger Tube Bundles in Two-Phase Flow; Part 2: Acoustic Resonance in Heat Exchanger Tube Bundles 390 Failure of Welds at Elevated Temperatures 391 Elevated Temperature Testing of Gaskets for Bolted Flanged Connections 392 Part 1: Developing Stress Intensification Factors: Standardized Method for Developing Stress Intensification Factors for Piping Components; Part 2: Developing Stress Intensification Factors: Effects of Weld Metal Profile on the Fatigue Life of Integrally 393 Interpretive Report on Dynamic Analysis and Testing of Pressurized Components and Systems - Fifth Edition 394 Simplified Methods For Creep-Fatigue Damage Evaluations And The Application To Life Extension 395 Vanadium and Columbium Additions in Pressure Vessel Steels 396 Research Report on Characterization and Monitoring of Cracking in Wet H2S Service 397 Empirical Modeling for Real-Time Weld Process Control and Generator Monitoring Interaction of Steels With Hydrogen in Petroleum Industry Pressure Vessel and Pipeline Service Vol XLIX 1-2 Progress Reports Vol XLIX 3-4 Progress Reports Vol XLIX 5-6 Progress Reports Vol XLIX 7-8 Progress Reports Vol XLIX 9-10 Progress Reports 1996 WRC 1996 1996 1995 1995 WRC WRC WRC WRC 1995 WRC 1995 1995 WRC WRC 1995 WRC 1995 1995 1995 1995 1995 1995 1995 1995 1995 1995 1994 1994 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 1994 1994 1994 WRC WRC WRC 1994 1994 1994 1994 1994 1994 1994 1994 1994 1994 1994 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 Vol XLIX 1112 Vol XLVIII 1-2 Vol XLVIII 3-4 Vol XLVIII 5-6 Vol XLVIII 7-8 Vol XLVIII 910 Vol XLVIII 1112 378 379 380 381 382 383 384 385 386 387 369 370 371 372 373 374 375 376 377 Vol XLVII 1-2 Vol XLVII 3-4 Vol XLVII 5-6 Vol XLVII 7-8 Vol XLVII 9-10 Vol XLVII 1112 Vol XLVI 1-2 Vol XLVI 3-4 Vol XLVI 7-8 Vol XLVI 9-10 360 Progress Reports 1994 WRC Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports 1993 1993 1993 1993 1993 WRC WRC WRC WRC WRC Progress Reports 1993 WRC Review and Evaluation of the Toughness of Austenitic Steels and Nickel Alloys after Long-Term Elevated Temperature Exposures Alternative Methods for Seismic Analysis of Piping Systems Recommendations to ASME for Code Guidelines and Criteria for Continued Operation of Equipment Non-Identical Flanges with Full-Face Elastic Gaskets Nuclear Piping Criteria for Advanced Light-Water Reactors Volume 1 - Failure Mechanisms and Corrective Actions Non-Destructive Measurement and Analysis of Residual Stress In and Around Welds - A State-Of-The-Art Survey Improving Steel Spot Weld Fatigue Resistance Joining of 6061 Aluminum Matrix-Ceramic Particle Reinforced Composites International Views on Reactor Pressure Vessel Integrity White Paper on Reactor Vessel Integrity Requirements for Level A and B Conditions Nitrogen In Arc Welding - A Review Recommendations Proposed By The PVRC Committee On Review Of ASME Nuclear Codes And Standards Characterization of PWHT Behavior of 500 N/mm2 Class TMCP Steels Guidelines For Flow-Induced Vibration Prevention In Heat Exchangers Research on Modern High Strength Low Alloy Steel Welding Papers Presented At The Conference On "Life Of Pressure Vessels" Held By The French AFIAP In 1989 The Significance Of The a/W Ratio On Fracture Toughness Of A-36 Steel Metal Fatigue In Operating Nuclear Power Plants Development of Test Procedures for Fire Resistance Qualification of Gaskets Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports 1993 WRC 1993 1993 1993 1993 1993 1993 1993 1993 1993 1992 1992 1992 1992 1992 1992 1992 1992 1992 1992 1992 1992 1992 1992 1992 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC Progress Reports Progress Reports Progress Reports Progress Reports Stress Indices, Pressure Design And Stress Intensification Factors For Laterals In Piping 1991 1991 1991 1991 1991 WRC WRC WRC WRC WRC 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 361 Part 1: Improvements On Fatigue Analysis Methods For The Design Of Nuclear Components Subjected To The French RCC-M Code; Part 2: Framatome View On The Comparison Between Class 1 And Class 2 RCC-M Piping Design Rules 362 Recommended Practices in Elevated Temperature Design: A Compendium of Breeder Reactor Experiences (1970-1987): Volume I - Current Status and Future Directions 363 Recommended Practices In Elevated Temperature Design: A Compendium Of Breeder Reactor Experiences (1970-1987): A Compendium Of Breeder Reactor Experiences (1970-1987): Volume II - Preliminary Design and Simplified Methods 364 Part 1: New Design Curves For Torispherical Heads; Part 2: Elastic-Plastic Analysis Of Shells Of Revolution Under Axisymmetric Loading 365 Recommended Practices In Elevated Temperature Design: A Compendium Of Breeder Reactor Experiences (1970-1987): Volume III - Inelastic Analysis 366 Recommended Practices in Elevated Temperature Design: A Compendium of Breeder Reactor Experiences (1970-1987): Volume IV- Special Topics 367 Basis Of Current Dynamic Stress Criteria For Piping 368 Stresses in Intersecting Cylinders Subjected to Pressure 350 Design Criteria for Dissimilar Metal Welds 351 Part 1: An Analytical Comparison Of Short Crack And Deep Crack CTOD Fracture Specimens Of An A36 Steel; Part 2: The Effects Of Crack Depth On Elastic-Plastic CTOD Fracture Toughness; Part 3: A Comparison Of The J-Integral And CTOD Parameters For Short Cra 352 Independent Support Motion (ISM) Method Of Modal Spectra Seismic Analysis 353 Position Paper On Nuclear Plant Pipe Supports 354 Part 1: Failure Analysis Of A Service-Exposed Hot Reheat Steam Line In A Utility Steam Plant; Part 2: The Influence Of Flux Composition On The Elevated Temperature Properties Of Cr-Mo Submerged Arc Weldments 355 Programming and Control of Welding Processes - Experience Of The U.S.S.R. 356 Part 1: Finite Element Modelling Of A Single Pass Weld; Part 2: Finite Element Analysis of Multi-Pass Welds; Part 3: Thermal and Mechanical Simulations of Resistance Spot Welding 357 Calculation of Electrical and Thermal Conductivities of Metallurgical Plasmas 358 The Effect Of Crack Depth To Specimen Width Ratio On The Elastic-Plastic Fracture Toughness Of A High-Strength Low-Strain Hardening Steel 359 Weldability of Low-Carbon Micro-Alloyed Steels for Marine Structures Vol XLV 1-2 Progress Reports Vol XLV 3-4 Progress Reports Vol XLV 5-6 Progress Reports Vol XLV 7-8 Progress Reports Vol XLV 9-10 Progress Reports Vol XLV 11-12 Progress Reports Vol XLIV 2-3-4 Progress Reports Vol XLIV 5-6 Progress Reports Vol XLiV 7-8 Progress Reports Vol XLIV 9-10 Progress Reports Vol XLIV 11- Progress Reports 12 Interaction of Steels With Hydrogen in Petroleum Industry Pressure Vessel Service 340 Interpretive Report On The Mechanical Properties Of Brazed Joints 341 A Preliminary Evaluation Of The Elevated Temperature Behavior Of A Bolted Flanged Connection 342 Stainless Steel Weld Metal: Prediction Of Ferrite Content 1991 WRC 1991 WRC 1991 WRC 1991 WRC 1991 WRC 1991 WRC 1991 1991 1990 1990 WRC WRC WRC WRC 1990 1990 1990 WRC WRC WRC 1990 1990 WRC WRC 1990 1990 WRC WRC 1990 1990 1990 1990 1990 1990 1990 1989 1989 1989 1989 1989 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 1989 1989 1989 1989 WRC WRC WRC WRC 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 343 344 Destructive Examination of PVRC Weld Specimens 202, 203 and 251J Part 1: Three Dimensional Finite Element Analysis Of PVRC 45 Degree Lateral Model 4 (d/D = 0.5, D/T = 40) Under OutOf-Plane Moment Loading On Branch Pipes; Part 2: Three Dimensional Finite Element Analysis Of 45 Degree Lateral Model 2 (d/D = 0.5, D/T = 1 345 Assessing Fracture Toughness And Cracking Susceptibility Of Steel Weldments - A Review 346 WFI/PVRC Moment Fatigue Tests On 4 x 3 ANSI B16.9 Tees 347 Part 1: Welded Tee Connections Of Pipes Exposed To Slowly Increasing Internal Pressure; Part 2: Flawed Pipes And Branch Connections Exposed To Pressure Pulses And Shock Waves 348 Repair Welding of Service Exposed Cr-Mo Steel Weldments 349 Part 1: Postweld Heat Treatment Cracking In Chromium-Molybdenum Steels; Part 2: Postweld Heat Treatment Cracking In High Strength Low Alloy Steels 330 Part 1: The Fracture Behavior of A588 Grade A and A572 Grade 50 Weldments; Part 2: Effects of Long-Time Postweld Heat Treatment on the Properties of Constructional-Steel Weldments 331 Metallurgical Investigation on Scatter of Toughness in Weldment of Pressure Vessel Steels, Part 1 & Part 2 332 Part 1: Characteristics of Heavy Weight Wide-Flange Structural Shapes; Part 2: Data Survey on Mechanical Property Characterization of A588 Steel Plates and Weldments 333 Bibliography on Fatigue of Weldments and Literature Review on Fatigue Crack Initiation from Weld Discontinuities 334 Review of Properties of Thermo-Mechanically Controlled Processed Steels - Pressure Vessel Steels for Low-Temperature Service 335 A Review of Area Replacement Rules for Pipe Connections in Pressure Vessels and Piping 336 Interpretive Report on Dynamic Analysis of Pressure Components - Fourth Edition 337 Experimental Validation of the Evaluation of Reinforced Openings in Large Steel Pressure Vessels 338 Interpretive Report on Electroslag, Electrogas and Related Welding Processes 339 Development of Tightness Test Procedures for Gaskets in Elevated Temperature Service Vol XLIII 1-2 Progress Reports Vol XLIII 3-4 Progress Reports Vol XLIII 5-6 Progress Reports Vol XLIII 7-8 Progress Reports Vol XLIII 9-10 Progress Reports Vol XLIII 11- Progress Reports 12 Vol XLII 1-2 Progress Reports Vol XLII 3-4 Progress Reports Vol XLII 5-6 Progress Reports Vol XLII 7-8 Progress Reports Vol XLII 9-10 Progress Reports Vol XLII 11-12 Progress Reports Weldability of Steels 321 The Dynamic Deformation of Piping 322 Part 1: The Strain Aging Behavior of Microalloyed Steels; Part 2: The Fracture Toughness Behavior of ASTM A737 Grade B and Grade C Microalloyed Pressure Vessel Steels; Part 3: The Fracture Behavior of ASTM A737 Grade B and Grade C Microalloyed Steel Weldm 323 Monograph on Narrow-Gap Welding Technology 324 Investigation of Design Criteria for Dynamic Loads on Nuclear Power Piping 1989 1989 WRC WRC 1989 1989 1989 WRC WRC WRC 1989 1989 WRC WRC 1988 WRC 1988 1988 WRC WRC 1988 1988 WRC WRC 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 1987 1987 1987 1987 1987 1987 1987 1987 1987 WRC WRC WRC WRC WRC WRC WRC WRC WRC 1987 1987 WRC WRC 392 393 325 326 394 395 327 328 396 397 329 297 398 311 399 400 401 402 403 312 313 314 315 316 404 405 317 318 406 319 407 408 409 410 411 412 413 414 415 416 417 418 419 420 320 Vol XLI 1-2 Vol XLI 3-4 Vol XLI 5-6 Vol XLI 7-8 Vol XLI 9-10 Vol XLI 11-12 Vol XL 1-2 Vol XL 3-4 Vol XL 5-6 Vol XL 7-8 Vol XL 11-12 301 302 421 422 423 303 304 305 424 306 Further Gasket Leakage Behavior Trends Submerged Arc-Welding Procedures for Steels Meeting Standard Specifications - Revised August 1987. (This revision is a part of the WRC book, "Weldability of Steels-Fourth Edition") Long-Range Plan for Pressure Vessel Research - Eighth Edition Part 1: Specimen Thickness Effects for Elastic-Plastic CTOD Toughness of an A36 Steel; Part 2: An Analytical and Experimental Comparison of Rectangular and Square CTOD Fracture Specimens of an A36 Steel Accuracy of Stress Intensification Factors for Branch Connections Local Stresses In Cylindrical Shells Due To External Loadings On Nozzles-Supplement to WRC Bulletin No. 107 (Revision I) Assessment of the Significance of Weld Discontinuities; Effects of Microstructure and Discontinuities Upon Fracture Morphology Joining of Molybdenum Base Metals and Factors which Influence Ductility Computer Programs for Imperfection Sensitivity Analysis of Stiffened Cylindrical Shells Bolted Flanged Connections with Full Face Gaskets Stress Rupture Behavior Of Postweld Heat Treated 2 1/4 Cr-1Mo Steel Weld Metal Part 1: Technical Position on Piping System Installation Tolerances; Part 2: Technical Position on Damping Values for Insulated Pipe - Summary Report PVRC Centrifugal Pump-Piping Interaction Experience Survey Part 1: Factors Influencing the Measurement of Ferrite Content in Austenitic Stainless Steel Weld Metal Using Magnetic Instruments; Part 2: Measurements of Ferrite Content in Austenitic Stainless Steel Weld Metal Giving Internationally Reproducible Result Sensitization of Austenitic Stainless Steels; Effects of Welding Variables on HAZ Sensitization of AISI 304 and HAZ Behavior of BWR Alternative Alloys 316 NG and 347 Welding Metallurgy and Weldability of High-Strength Aluminum Alloys Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports A Parametric Three-Dimensional Finite Element Study of 45 Degree Lateral Connections Part 1: Postweld Heat Treatment of Pressure Vessels; Part 2: Relaxation Stresses in Pressure Vessels; Part 3: A Study of Residual Stress in Pressure Vessel Steels Interpretive Report on Dynamic Analysis of Pressure Components - Third Edition Experimental Limit Couples for Branch Moment Loads on 4-in. ANSI B16.9 TEES Part 1: Hydrogen Attack Limit of 2 1/4 Cr-1Mo Steel; Part 2: Embrittlement of Pressure Vessel Steels in High Temperature, High Pressure Hydrogen Environment; Part 3: Hydrogen Embrittlement of Bond Structure Between Stainelss Steel Overlay and Base Metal PVRC Flanged Joint User Survey 1987 1987 WRC WRC 1987 1987 WRC WRC 1987 1987 WRC WRC 1986 WRC 1986 1986 1986 1986 1986 WRC WRC WRC WRC WRC 1986 1986 WRC WRC 1986 WRC 1986 1986 1986 1986 1986 1986 1986 1985 1985 1985 1985 1985 1985 1985 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 1985 1985 1985 WRC WRC WRC 1985 WRC 425 426 427 428 429 430 431 432 433 434 435 436 307 308 309 310 291 292 293 294 295 296 298 299 437 300 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 Vol XXXIX 1 Vol XXXIX 2 Vol XXXIX 3 Vol XXXIX 4 Vol XXXIX 5 Vol XXXIX 6-7 Vol XXXIX 8 Vol XXXIX 9 Vol XXXIX 11 Vol XXXIX 12 Vol XXXVIII 1 Vol XXXVIII 2 Vol XXXVIII 3 Vol XXXVIII 4 Vol XXXVIII 5 Vol XXXVIII 6-7 Vol XXXVIII 8 Vol XXXVIII 9 Vol XXXVIII 11 Vol XXXVIII 12 283 284 285 454 455 456 457 458 459 460 Fatigue and Creep Rupture Damage of Perforated Plates Subjected to Cyclic Plastic Straining in Creep Regime Verification and Application of an Inelastic Analysis Method for LMFBR Piping System Development of a Production Test Procedure for Gaskets Damage Studies in Pressure Vessel Components Fracture Control of Pressure Vessels up to 2 1/2 Inches Thick PVRC Milestone Gasket Tests - First Results Current Welding Research Problems Part 1: Creep of Bolted Flanged Connections Fundamentals of Weld Discontinuities and Their Significance Fitness-For-Service Criteria For Pipeline Girth-Weld Quality Long-Range Plan for Pressure-Vessel Research - Seventh Edition Part 1: Engineering Aspects of CTOD Fracture Toughness Testing; Part 2: Three-Dimensional Elastic-Plastic Finite Element Analysis of Three-Point Bend Specimen; Part 3: Failure Prediction of Notched Pressure Vessels Using The CTOD Approach Part 1: Technical Position on Criteria Establishment; Part 2: Technical Position on Damping Values for Piping-Interim Summary Report; Part 3: Technical Position on Response Spectra Broadening; Part 4: Technical Position on Industry Practice Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports 1985 1985 1985 1985 1984 1984 1984 1984 1984 1984 1984 1984 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 1984 WRC 1984 1984 1984 1984 1984 1984 1984 1984 1984 1984 1983 1983 1983 1983 1983 1983 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC Progress Reports Progress Reports Progress Reports 1983 1983 1983 WRC WRC WRC Progress Reports 1983 WRC A Critical Evaluation of Fatigue Crack Growth Measurement Techniques for Elevated Temperature Applications The External Pressure Collapse Tests of Tubes Part 1: Stress Indices and Flexibility Factors for Concentric Nozzles 1983 1983 1983 WRC WRC WRC 461 462 463 464 465 466 286 287 288 289 290 274 467 275 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 276 277 278 279 280 281 282 Vol XXXVII 1 Vol XXXVII 2 Vol XXXVII 3 Vol XXXVII 4 Vol XXXVII 5 Vol XXXVII 6 Vol XXXVII 7 Vol XXXVII 8 Vol XXXVII 9 Vol XXXVII 10 Vol XXXVI 1 Vol XXXVI 2 Vol XXXVI 3 Vol XXXVI 4 Vol XXXVI 5 Vol XXXVI 6 Vol XXXVI 7 Vol XXXVI 8 Vol XXXVI 9 Vol XXXVI 11 Vol XXXVI 12 265 266 267 268 Fatigue Behavior of Aluminum Alloy Weldments Welding of Copper and Copper Base Alloys Fracture of Pipelines and Cylinders Containing a Circumferential Crack Hot Cracking Susceptibility of Austenitic Stainless Steel Weld Metals Factors Affecting Porosity in Aluminum Welds - A Review Part 1: International Benchmark Project on Simplified Methods for Elevated Temperature Design and Analysis; Problem II: The Saclay Fluctuating Sodium Level Experiment; Comparison on Analytical & Experimental Results; Problem III: The Oak Ridge Nozzle to S The Use of Quenched and Tempered 2 1/4 Cr-1 Mo Steel for Thick Wall Reactor Vessels in Petroleum Refinery Processes: An Interpretive Review of 25 Years of Research and Application A Summary and Critical Evaluation of Stress Intensity Factor Solutions of Corner Cracks at the Edge of a Hole High Temperature Properties of 2 1/4 Cr-1 Mo Weld Metal The Crack Arrest Properties of 9% Nickel Steels for Cryogenic Applications Part 1: Weldability and Fracture Toughness of Quenched and Tempered 9% Nickel Steel: Weld Simulation Testing The Varestraint Test Hydrodynamic Response of Fluid Coupled Cylinders: Simplified Damping and Inertia Coefficients Elastic-Plastic Buckling of Axially Compressed Ring Stiffened Cylinders - Test vs Theory Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Progress Reports Interpretive Report on Small Scale Test Correlations with Klc Data Part 1: Weldability and Fracture Toughness of 5% Ni Steel-Part 1: Weld Simulation Testing Elastic-Plastic Buckling of Internally Pressurized Ellipsoidal Pressure Vessel Heads Review of Worldwide Weld Discontinuity Acceptance Standards 1983 1983 1983 1983 1983 1982 WRC WRC WRC WRC WRC WRC 1982 WRC 1982 1982 1982 1982 1982 1982 1982 1982 1982 1982 1982 1982 1982 1982 1982 1982 1982 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981 1981 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 500 501 502 503 504 505 506 269 270 271 272 273 256 257 507 258 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 259 260 261 262 263 264 248 249 250 251 252 253 254 255 107 245 246 247 191 234 235 236 237 238 239 240 534 535 536 537 538 241 242 243 244 223 Interpretive Report on Dynamic Analysis of Pressure Components - Second Edition Long-Range Plan for Pressure Vessel Research - Sixth Edition Part 1: Methods of Analysis of Bolted Flanged Connections - A review Part 1: Design of Beam Columns with Lateral-Torsional End Restraints Design Implications of Recent Advances in Elevated Temperature Bounding Techniques Review of Data Relevant to the Design of Tubular Joints for Use in Fixed Offshore Platforms Analysis of the Ultrasonic Examinations of PVRC Weld Specimens 155, 202, and 203 by Standard and Two-Point Coincidence Methods Part 1: International Benchmark Project on Simplified Methods for Elevated Temperature Design and Analysis: Problem I The Oak Ridge Pipe Ratcheting Experiment Analysis of the Radiographic Evaluation of PVRC Weld Specimens 155, 202, 203 and 251J Energy Dissipation Characteristics of Pipes and Short Compression Members as Elements of Pipe-Whip Restraint Effects of Porosity on the Facture Toughness of 5083, 5456, and 6061 Aluminum Alloy Weldments Part 1: Derivation of ASME Code Formulas for the Design of Reverse Flanges An Annotated Bibliography on the Significance, Origin and Nature of Discontinuities in Welds, 1975-1980 The Influence of Multiaxial Stress on Low-Cycle Fatigue of Cr-Mo-V Steel at 1000 degrees F Allowable Axial Stress Of Restrained Multi-Segment, Tapered Roof Girders Review Of Analytical And Experimental Techniques For Improving Structural Dynamic Models Generalized Yield Surfaces For Plates And Shells Comparison Of Three-Dimensional Finite Element And Photoelastic Results For Lateral Connection, WC-12B2 Ultrasonic Evaluation and Sectioning of PVRC Plate Weld Specimen 201 A Survey Of Simplified Inelastic Analysis Methods Part 1: A Critical Evaluation of Plastic Behavior Data and A Unified Definition of Plastic Loads for Pressure Components Experimental Investigation Of Commercially Fabricated 2:1 Ellipsoidal Heads Subjected to Internal Pressure Local Stresses In Spherical And Cylindrical Shells Due To External Loadings A Fracture Mechanics Evaluation of Flaws in Pipeline Girth Welds Interpretive Report on Dynamic Analysis of Pressure Components Corrosion Resistance Of Brazed Joints Suggested Arc-Welding Procedures for Steels Meeting Standard Specifications Effects of Lack-of-Penetration and Lack-of-Fusion on the Fatigue Properties of 5083 Aluminum Alloy Welds Part 1: Improved Repeatability in Ultrasonic Examination Determination of Stiffness and Loading in Bolted Joints Having A Circular Geometry Investigation Of Methods Of Controlling And Reducing Weld Distortion In Aluminum Structures Plastic Stability of Pipes and Tees Exposed to External Couples Review Of Fracture Mechanics Approaches To Defining Critical Size Girth Weld Discontinuities Hydrogen Embrittlement Of Austenitic Stainless Steel Weld Metal With Special Consideration Given To The Effects Of Sigma Phase Long-Range Plan For Pressure Vessel Research - Fifth Edition Fatigue Behavior Of 5000 Series Aluminum Alloy Weldments In Marine Environment Part 1: Effective Utilization Of Yield Strength Steels In Fatigue Part 1: Ultrasonic Soldering Hot Wire Welding and Surfacing Techniques 1981 1981 1981 1981 1981 1980 1980 WRC WRC WRC WRC WRC WRC WRC 1980 WRC 1980 1980 1980 1980 1980 1980 1979 1979 1979 1979 1979 1979 1979 1979 1979 1979 1979 1978 1978 1978 1978 1978 1978 1978 1978 1978 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 1978 1978 1978 1978 1977 WRC WRC WRC WRC WRC 539 540 541 542 543 544 545 224 225 226 227 228 229 230 546 547 548 549 550 551 552 231 232 233 213 214 215 216 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 217 218 219 220 221 222 571 572 573 574 575 576 577 192 193 194 195 196 197 198 202 203 204 205 206 207 208 209 210 211 212 Interpretive Report on Underwater Welding Resistance Seam Welding A Review of Minor Element Effects on the Welding Arc and Weld Penetration Part 1: Through Thickness Fatigue Properties of Steel Plate; Part 2: Reference Stress Concepts for Creep Analysis Statistical Analysis of Dependence of Weld Metal Properties on Composition Part 1: Dynamic Fracture-Resistance Testing and Methods For Structural Analysis Part 1: An Experimental Study of Elasto-Plastic Response of Branch-Pipe Tee Connections Subjected to Internal Pressure, External Couples and Combined Loadings Factors Affecting Weld Metal Properties in Carbon and Low Alloy Pressure Vessel Steels Through Thickness Properties and Lamellar Tearing (a Bibliography) Report of Gasket Factor Tests Part 1: Weldability of Niobium Containing High Strength Low Alloy Steel Stud Welding Part 1: Development of Design Rules for Dished Pressure Vessel Heads Preventing Hydrogen-Induced Cracking After Welding of Pressure Vessel Steels by Use of Low Temperature Postweld Heat Treatments Part 1: Through Thickness Fatigue Properties of Steel Plate; Part 2: Properties of Heavy Section Nuclear Reactor Steels Tests of Bolted Beam-to-Column Flange Moment Connections Experimental Investigation of Limit Loads of Nozzles In Cylindrical Vessels Metal-to-Metal Adhesive Bonding Part 1: Analysis of Test Data on PVRC Specification No.3, Ultrasonic Examination of Forgings, Revisions I and II The Significance of Weld Discontinuities - A Review of Current Literature Welding of line pipe steels Current Welding Research Problems Niobium-and Vanadium-Containing Steels for Pressure Vessel Service Friction Welding Fracture Toughness and Related Characteristics of the Cryogenic Nickel Steels Effects of Porosity on the Fatigue Properties of 5083 Aluminum Alloy Weldments Joining of Metal-Matrix Fiber-Reinforced Composite Materials Review of Data on Mitre Joints in Piping to Establish Maximum Angularity for Fabrication of Girth Butt Welds Long-Range Plan for Pressure Vessel Research - Fourth Edition The Fabrication of Dissimilar Metal Joints Containing Reactive and Refractory Metals Stress-Relief Cracking in Steel Weldments Bibliography of Published Reports (Resulting from the Work of WRC Project Committees on Pressure Vessels, Structural Steel, Fatigue of Welding Joints, Weldability, High Alloys, Aluminum Alloys, and Interpretive Reports) Allowable Stress for Web-Tapered Beams with Lateral Restraints Basic Considerations for Tubular Joint Design in Offshore Construction Fatigue Behavior of Pressure-Vessel Steels Part 1: A Review of Bounding Techniques in Shakedown and Ratcheting at Elevated Temperatures Electron Beam Welding A Review of Underclad Cracking in Pressure-Vessel Components Part 1: Secondary Stress Indices for Integral Structural Attachments to Straight Pipe 1977 1977 1977 1977 1977 1977 1977 WRC WRC WRC WRC WRC WRC WRC 1977 1977 1977 1976 1976 1976 1976 WRC WRC WRC WRC WRC WRC WRC 1976 1976 1976 1976 1976 1976 1976 1975 1975 1975 1975 1975 1975 1975 1975 1975 1975 1975 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 1974 1974 1974 1974 1974 1974 1974 WRC WRC WRC WRC WRC WRC WRC 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 199 200 201 180 181 182 183 184 185 186 187 188 189 190 169 170 171 172 173 174 175 176 177 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 178 179 158 159 160 161 162 163 164 165 166 167 168 147 148 149 150 Fatigue Behavior of Aluminum Alloy 5083 Butt Welds Analysis of Test Data on Branch Connections Exposed to Internal Pressure and/or External Couples Part 1: The Submerged Arc Weld In HSLA Line Pipe - A State-of-the-Art Review Elastic-Plastic Bending of a Constrained Circular Perforated Plate Under Uniform Pressure (Triangular Penetration Pattern) Effects of Porosity on the Tensile Properties of 5083 and 6061 Aluminum Alloy Weldments Brazed Honeycomb Structures Critical Literature Review of Embrittlement in 2 1/4 Cr-1 Mo Steel Submerged-Arc-Weld Hardness and Cracking in Wet Sulfide Service Improved Discontinuity Detection Using Computer-Aided Ultrasonic Pulse-Echo Techniques Part 1: Design Options for Selection of Fracture Control Procedures in the Modernization of Codes, Rules and Standards High-Temperature Brazing Part 1: Behavior and Design of Steel Beam-to-Column Moment Connections Hardness as an Index of Weldability and Service Performance of Steel Weldments Fluxes and Slags in Welding University Welding Research Directory MIG Welding and Pulsed Power Fatigue Behavior of Aluminum Alloy Weldments Part 1: Sensitivity of the Delta Test to Steel Compositions and Variables Design of Tapered Members Residual Stresses and Distortion in Welded Aluminum Structures and Their Effects on Service Performance PVRC Recommendations on Toughness Requirements for Ferritic Materials Long-Range Plan for Pressure-Vessel Research -Third Edition Comparison and Analysis of Residual Stress Measuring Techniques and The Effect of Post-Weld Heat Treatment on Residual Stresses in Inconel 600, Inconel X-750 and Rene' 41 Weldments Joining Ceramics to Metals and Other Materials Stress Indices and Flexibility Factors for Moment Loadings on Elbows and Curved Pipe PVRC Interpretive Report of Pressure Vessel Research, Section 3 - Fabrication and Environmental Considerations Welding of Maraging Steels High-Frequency Resistance Welding The Fabrication and Welding of High-Strength Line-Pipe Steels Unified Theory of Cumulative Damage in Metal Fatigue Part 1: Elastic-Plastic Deformations in Pressure Vessel Heads Part 1: Elastic-Plastic Deformations in Pressure Vessel Heads The Toughness of 2 1/4% and 3 1/2% Nickel Steels at Cryogenic Temperatures Part 1: Review of Service Experience and Test Data on Openings in Pressure Vessels with Non-Integral Reinforcing Laser Welding and Cutting Lamellar Tearing Transition-Temperature Data for Five Structural Steels Interaction Curves for Sections Under Combined Biaxial Bending and Axial Force Control of Distortion and Shrinkage in Welding Part 1: Recent Studies of Cracking During Postwelding Heat Treatment of Nickel-Base Alloys: Evaluating the Resistance of Rene' 41 to Strain-Age Cracking 1974 1974 1974 1973 1973 1973 1973 1973 1973 1973 1973 1973 1973 1973 1972 1972 1972 1972 1972 1972 1972 1972 1972 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 1972 1972 1971 1971 1971 1971 1971 1971 1971 1971 1971 1971 1971 1970 1970 1970 1970 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 618 619 620 151 152 153 621 622 623 624 625 626 627 628 629 630 154 155 156 157 631 141 632 633 634 635 636 142 143 144 145 146 637 638 639 640 127 128 129 130 641 642 643 131 132 133 644 134 645 646 647 648 649 650 651 652 653 135 136 119 120 121 122 123 124 125 137 138 139 140 Further Theoretical Treatment of Perforated Plates with Square Penetration Patterns Influence of Weld Defects on the Mechanical Properties of Aluminum Alloy Weldments Part 1: Interpretive Report on Oblique Nozzle Connections in Pressure Vessel Heads and Shells Under Internal Pressure Loading Electroslag, Electrogas, and Related Welding Processes Fatigue and Static Tests of Two Welded Plate Girders Part 1: Pilot Tests on the Static Strength of Unsymmetrical Plate Girders Significance of Fracture Extension Resistance (R Curve) Factors in Fracture-Safe Design for Nonfrangible Metals Methods of high-alloy weldability evalution Effects of minor elements on the weldability of high-nickel alloys Current Welding Research Problems Intergranular Corrosion of Chromium-Nickel Stainless Steels-Final Report Part 1: Stress Concentrations in Two Normally Intersecting Cylindrical Shells Subject to Internal Pressure Fracture Toughness Characterization Procedures and Interpretations to Fracture-Safe Design for Structural Aluminum Alloys Integration of Metallurgical and Fracture Mechanics Concepts of Transition Temperature Factors Relating to Fracture-Safe Design for Structural Steels Part 1: Experiments on Wide-Flange Beams Under Moment Gradient Cast Heat-Resistant Alloys for High-Temperature Weldments Long-Range Plan for Pressure-Vessel Research-Second Edition Part 1: Interpretive Report on Effect of Hydrogen in Pressure-Vessel Steels: Section I-Basic and Research Aspects Structural Stability Design Provisions-A Comparison of the Provisions of the CRC Guide and the Specifications of AASHO, AISC and AREA Girder Web Boundary Stresses and Fatigue Welding of Precipitation-Hardening Nickel-Base Alloys Elastic Stresses in Pressure Vessel Heads Advances in Fracture Toughness characterization Procedures and in Quantitative Interpretations to Fracture-Safe Design for Structural Steels Arc Plasmas for Joining, Cutting and Surfacing The Measurement of Delta Ferrite In Austenitic Stainless Steels Part 1: Proposed Reinforcement Design Procedure for Radial Nozzles in Spherical Shells with Internal Pressure (Phase Report No. 1) Procedures For Fracture Toughness Characterization and Interpretations to Failure-Safe Design for Structural Titanium Alloys Cyclic Pressure Tests of Full Size Pressure Vessels Creep-Rupture Properties of Quenched and Tempered Pressure Vessel Steels-A Data Summary Part 1: Interpretive Report on Pressure Vessel Heads Part 1: The Properties and Microstructure of Spray-Quenched Thick-Section Steels Part 1: Residual Stresses in "T-1" Constructional Alloy Steel Plates A Review of Some Microstructural Aspects of Fracture in Crystalline Materials Fundamentals of Heat Flow in Welding A Study of Perforated Plates with Square Penetration Patterns Analysis of In-Plane T, Y and K Welded Tubular Connections 1970 1970 1970 WRC WRC WRC 1970 1970 1970 1970 1970 1969 1969 1969 1969 1969 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 1969 WRC 1969 1969 1969 1969 1969 WRC WRC WRC WRC WRC 1968 1968 1968 1968 WRC WRC WRC WRC 1968 1968 1968 WRC WRC WRC 1968 WRC 1968 1968 1967 1967 1967 1967 1967 1967 1967 WRC WRC WRC WRC WRC WRC WRC WRC WRC 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 126 111 112 113 114 115 116 117 118 102 103 104 105 106 108 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 109 110 093 094 095 096 097 098 099 100 101 084 085 086 087 088 089 090 091 092 074 075 076 077 078 Part 1: Fracture Development and Material Properties in PVRC-Penn State Pressure Vessel Interpretive Report on Weld-Metal Toughness Improvement of the Fatigue Life of Spotwelds Part 1: Photoelastic Study of the Stresses Near Openings in Pressure Vessels Joining of Plastics Further Studies on the Lateral-Torsional Buckling of Steel Beam-Columns Long Range Plan for Pressure Vessel Research Static Tests on Longitudinally Stiffened Plate Girders Fatigue Tests of Large-Size Welded Plate Girders State Of Stress In A Circular Cylindrical Shell With A Circular Hole Welding Of Age-Hardenable Stainless Steels Bonding Of Metals With Explosives Arc Spot Welding Part 1: Stress Analysis Of A Circular Plate Containing A Rectangular Array Of Holes Part 1: Experimental Determination of Stress Distributions in Thin-Walled Cylindrical and Spherical Pressure Vessels with Circular Nozzles A Review of Diffusion Welding Part 1: Experiments on High Strength Steel Members Intergranular Corrosion Of Chromium-Nickel Stainless Steel - Progress Report No. 1 The Design Of Thick-Walled Closed-Ended Cylinders Based On Torsion Data PVRC Interpretive Report on Pressure Vessel Research, Section 1 - Design Consideration Part 1: Stresses Near A Cylindrical Outlet In A Spherical Vessel D. C. Welding Power Sources For Gas-Shielded Metal Arc Welding Part 1: Failure Analysis Of PVRC Vessel No. 5: A Study Of Materials Properties And Fracture Development Part 1: Experiments On Braced Wide-Flange Beams Electron Beam Welding PVRC Interpretive Report Of Pressure Vessel Research, Section 2 - Materials Considerations Fatigue of Welded Steel Structures An Experimental Investigation Of The Stresses Produced In Spherical Vessels By External Loads Transferred By A Nozzle Welding Of Reactive And Refractory Metals Welding Of Steel At Low Ambient Temperatures Part 1: Critical Factors In The Interpretation Of Radiation Effects On The Mechanical Properties Of Structural Metals Fracture Analysis Diagram Procedures For The Fracture-Safe Engineering Design Of Steel Structures Experimental Investigation Of Stresses In Nozzles In Cylindrical Pressure Vessels Part 1: A Critical Study Of The Solutions Of The Asymmetric Bending Of Spherical Shells Plastic Analysis And Tests Of Haunched Corner Connections Brazed Honeycomb Structures A Critical Evaluation Of The Strength Of Thick-Walled Cylindrical Pressure Vessels Aluminum And Aluminum Alloys For Pressure Vessels Gas And Oil Pipeline Welding Practices PVRC Research On Reinforcement Of Openings In Pressure Vessels Part 1: Nomographs For The Solution Of Beam-Column Problems 1967 1966 1966 1966 1966 1966 1966 1966 1966 1965 1965 1965 1965 1965 1965 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 1965 1965 1964 1964 1964 1964 1964 1964 1964 1964 1964 1964 1963 1963 1963 1963 1963 1963 1963 1963 1963 1962 1962 1962 1962 1962 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 079 080 081 082 083 066 067 068 069 070 071 072 073 057 058 059 060 061 062 063 064 065 046 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 047 048 049 050 051 052 053 054 055 056 039 040 041 042 043 044 045 032 Welding Ultra High Strength Steel Sheet Part 1: Analysis Of A Perforated Circular Plate Containing A Rectangular Array Of Holes Part 1: A Survey of Literature on the Stability of Frames Arc Welding Of Thick Cross Sections Arc Welding Of Magnesium And Magnesium Alloys Interpretive Report On Operating Conditions For Nuclear Pressure Vessels Strength of Thick-Walled Cylindrical Vessels Under Internal Pressure for Three Steels Part 1: A Coated Electrode For Fusion Welding AISI 4340 Steel For Ultra High Strength Applications Part 1: The Effects Of Internal Pressure On Thin-Shell Pressure Vessel Heads Inert-Gas Shielded Arc Welding Of Ferrous Metal Part 1: Research On Tubular Connections In Structural Work Thermal Fatigue - A Critical Review Copper And Copper Alloys For Pressure Vessels Some Observations On The Brittle Fracture Problem Strength Of Aluminum Alloy 6061-T4 Thick-Walled Cylindrical Vessels Subjected To Internal Pressures Part 1: Factors Which Affect Low-Alloy Weld Metal Notch-Toughness Part 1: An Experimental Investigation Of Stresses In The Neighborhood Of Attachments To A Cylindrical Shell Interpretive Report On Welding Of Nickel Clad And Stainless Clad Steel Plate Comparison And Analysis Of Notch Toughness Tests For Steels In Welded Structures Part 1: Welded Interior Beam-To-Column Connections Web Buckling Tests On Welded Plate Girders Feasibility Studies Of Stresses In Ligaments Observations of Strains Near Reinforced and Non-Reinforced Cone Cylinder Intersections, and Discussion - "Design Formulas for a Thin Cylinder with Cone Shaped Ends" An Experimental Investigation of Open-Web Beams Plastic Design of Pinned-Base Gable Frames Part 1: Stresses in a Spherical Vessel from Radial Loads Acting on a Pipe Part 1: Stresses In Spherical Vessels From Local Loads Transferred By A Pipe Part 1: Theoretical Stresses Near A Circular Opening In A Flat Plate Reinforced With A Cylindrical Outlet Part 1: A Review, Comparison And Modification Of Present Deflection Theory For Flat Perforated Plates Plastic Design of Pinned-Base "Lean-To" Frames Bending Of 2:1 And 3:1 Open-Crown Ellipsoidal Shells Fourth Technical Progress Report Of The Ship Structure Committee Interpretive Report On Welding Titanium And Titanium Alloys Plastic Analysis and Design of Square Rigid Frame Knees Design of a Thin-Walled Cylindrical Pressure Vessel Based Upon The Plastic Range and Considering Anisotropy Design of Thick-Walled Pressure Vessels Based Upon the Plastic Range Weld Flaw Evaluation Welding Type 347 Stainless Steel Piping and Tubing The Influence of Residual Stress on the Strength of Structural Members Ten Years of Progress in Pressure Vessel Research (1948-1958) Part 1: Graphitization of Steel in Petroleum Refining Equipment 1962 1962 1962 1962 1962 1961 1961 1961 1961 1961 1961 1961 1961 1960 1960 1960 1960 1960 1960 1960 1960 1960 1959 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 1959 1959 1959 1959 1959 1959 1959 1959 1959 1959 1958 1958 1958 1958 1958 1958 1958 1957 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 033 034 035 036 037 038 024 025 026 027 028 029 030 031 020 021 022 023 017 018 019 015 016 010 011 012 013 014 009 004 005 006 007 008 001 002 003 Further Studies of the Hot-Ductility of High-Temperature Alloys Computation of the Stresses from Local Loads in Spherical Pressure Vessels or Pressure Vessel Heads The Tensile Properties of Selected Steels as a Function of Temperature Ultra-High-Strength Weld Metal with Low-Hydrogen Electrodes The Value of the Notch Tensile Test Proof-Testing Pressure Vessels Designed for Internal Pressure Control of Steel construction to avoid brittle failure Nickel and High-Nickel Alloys for Pressure Vessels Bibliography on the Welding of Stainless Steels, 1926-1955 with Author Index Investigation of the Influence of Deoxidation and Chemical Composition on Notched-Bar Properties Of Ship Plate Steels Part 1: Mechanical Properties and Weldability of Six High-Strength Steels Aluminum and Aluminum Alloys for Pressure Vessels Development of Brazing Alloys for Joining Heat Resistant Alloys Oxidation-Resistant Brazing Alloys Stainless Steel for Pressure Vessels Part 1: High-Strength Low Alloy Steels Coating Moisture Investigations of Austenitic Electrodes of the Modified 18-8 Type Welded Tee Connections Cracking of Simple Structural Geometries A Critical Survey of Brittle Failure in Carbon Plate Steel Structures Other Than Ships Testing of Stainless-Steel Weldments Review of Welded Ship Failures Slag-Metal Interaction in Arc Welding Part 1: Third Technical Progress Report of the Ship Structure Committee Thermal Fatigue and Thermal Shock Investigations of Effect of Fabrication Operations Upon Pressure Vessel Steels An Analytical Study of Aluminum Welding A New High-Yield Strength Alloy Steel for Welded Structures Welding Processes and Procedures Employed in Joining Stainless Steels Copper in Stainless Steels Part 1: Testing Pressure Vessels Part 1: How Plastic Deformation Influences Design and Forming of Metal Parts Part 1: Stress Corrosion Cracking of Stainless Steels: Practical Experiences Instrumentation for the Evaluation of the Stability of the Welding Arc Tests of Columns Under Combined Thrust and Moment Steel Compositions and Specifications The Nature of the Arc Burn-Off Characteristics of Steel Welding Electrodes Development of Superior Notch Toughness in High-Dilution Weldments of Microolloyed Steel Microstructure of a high-chromium, white-iron alloy which has been modified with titanium 1957 1957 1957 1957 1957 1957 1957 1956 1956 1956 1956 1956 1956 1956 1956 1955 1955 1955 1955 1954 1954 1954 1953 1953 1952 1952 1952 1952 1952 1951 1950 1950 1950 1950 1950 1949 1949 1949 WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC WRC Hercules Ebooks Institute www.herculesebooks.com info@herculesebooks.com +989141908737
