A
SEMINAR REPORT
ON
“Title”
Submitted in the partial fulfillment of the
requirement for the award of degree of
BACHELOR OF TECHNOLOGY
In
CHEMICAL ENGINEERING
SUBMITED BY
NAME
ROLL NO ()
UNDER THE GUIDANCE OF
Prof. POOJA P. SANAP
DEPARTMENT OF CHEMICAL ENGINEERING
DR. BABASAHEB AMBEDKAR TECHNOLOGICAL UNIVERSITY,
LONERE 402103, Dist. Raigad, Maharashtra
2021-2022
Dr. Babasaheb Ambedkar Technological University,
Lonere 402103, Tal. - Mangaon, Dist. - Raigad, (M.S.)
DEPARTMENT OF CHEMICAL ENGINEERING
CERTIFICATE
This is to certify that the seminar report titled “……………” is the bonafide work carried out by
Mr/Ms XYZ, Roll No. ….. of First Year Bachelor of Technology in Chemical Engineering. It is
approved for fulfillment of requirement of degree of Bachelor of Technology in Chemical
Engineering of Dr. BABASAHEB AMBEDKAR TECHNOLOGICAL UNIVERSITY, Lonere,
Raigad 402103.
Guide
Prof. Pooja P. Sanap
Department of Chemical Engg.
Examiners: 1.
2.
Place: Lonere
Date:
Head of department.
Dr. A. R. Chavan
Department of Chemical Engg.
ACKNOWLEDGEMENT
I express my profound sense of gratitude I express my profound sense of gratitude to
our pro-active staff without whose guidance this work would have not been success. Their
constructive criticism and useful timely suggestions and encouragement in every step
immensely helped me. Their invaluable presence was great boost for me in achieving our goal.
I would also like to thank Dr. A. R. Chavan, Head, Department of Chemical
Engineering,
DR.BABASAHEB
AMBEDKAR
TECHNOLOGICAL
UNIVERSITY,
LONERE for their systematic guidance, valuable advice and constant encouragement
throughout the work. It was his motivation, which helped me to learn new thing.
I would also like to thank all staff members in department, library, and reference section
(DR. B. A. T. U.) that extended all kind of co-operation for the completion of this work.
Name
(Roll Number)
TABLE OF CONTENTS
iii
Chapter No.
Particulars
Page No.
CERTIFICATE
ACKNOWLEDGEMENT
TABLES OF CONTENT
LIST OF TABLE
LIST OF FIGURE
Nomenclature
1.
2.
i
ii
iii
iv
v
vi
vii
1-3
4-5
Introduction
3.
.
6-15
Conclusion
16
References
17
iv
Title
LIST OF TABLE
Sr. No
1
Title
Types of adsorption based on isotherm properties
DR.BATU, LONERE
Page 5
Page no.
9
Title
Sr.
No
1
LIST OF FIGURE
Title
Isotherm graphs demonstrating the different types of adsorption by
Page No.
9
plotting amount adsorbed vs. vapor pressure
2
16
3
18
4
5
18
19
6
19
7
20
8
20
DR.BATU, LONERE
Page 6
Title
Nomenclature
AA
×
Acetic acid
Coefficient
DR.BATU, LONERE
Page 7
Title
CHAPTER 1
INTRODUTION
Separation of azeotropic mixtures is a topic of great practical and industrial interest. Mixtures
are renewable. Process industry deals with a lot of mixtures which emerge because of operation like
catalysis thatis reaction, extraction, dilution etc. Environmental regulation prohibit the passage of
these chemical through atmospheric bodies like air, water, solid also many of these chemicals are
costly so we need to recover them.
(Every chapter must be at least 2 pages)
DR.BATU, LONERE
Page 8
Title
CONCLUSION
(Give concluding remark on your topic in one paragraph)
DR.BATU, LONERE
Page 9
Title
REFRENCES
1. S. Al-Asheh, F. Banat,N. Al-Lagtah, “Separation Of Ethanol–Water Mixtures Using
Molecular Sieves And Biobased Adsorbents”, Trans IChemE, Part A, Chemical Engineering
Research and Design, 2004, 82(A7): 855–864, DOI:10.1205/0263876041596779
2. J. D. Seader Ernest J. Henley “Separation process principles (second edition)”, (John Wiley &
Sons, Inc.)

FOR TITLE USE 14 Pt (Bold)

FOR NORMAL TEXT USE 12 pt

USE TIMES NEW ROMAN FONT

SPACING : 1.5

ALIGNMENT :JUSTIFY
DR.BATU, LONERE
Page 10