DESIGN SERVICE
Our purpose is to help you meet your goals and objectives. Based on your goals and
objectives, and your answers to our questions, we will provide you a complete system
design for your outdoor boiler to interface with the buildings and places you want to heat.
Your answers to our questions are important. We rely on you to provide us accurate
information and we will base our design exclusively on your input – we do not visit your
home and we are not an installer. But we have helped tens of thousands of homeowners like
you with complete design systems that are optimized for maximum savings! There is no
other company in the world that provides this service like the experts at OutdoorBoiler.com.
If you have any questions about this design, or any of the drawings, instructions, bills of
materials, please do not hesitate to contact us. We are here to support you and enable you
to achieve the following:
✔Add up to $250,000 for your retirement with your outdoor boiler
✔Get 40 years or more out of your outdoor boiler
✔Stay Toasty Warm and Comfortable for Decades!
user2outdoorboiler@gmail.com Switch account
The name and photo associated with your Google account will be recorded when you upload
files and submit this form. Your email is not part of your response.
* Required
Customer Name
*
Your answer
Initial Conference Call Date
*March 3, 2023
Date
Customer Address
*
Your answer
Customer Phone
*
Your answer
Customer email
*
Your answer
Please describe your overall goals and Objectives for this outdoor boiler system.
*
Your answer
Outdoor Boiler Brand/Model (already purchased or planning to purchase):
Brand:
*
Your answer
Model of your Outdoor Wood Boiler/Furnace
Your answer
Do you have a chimney cap?
*
Yes
No
If no, what is the outer diameter of your chimney?
Your answer
Do you have a chimney extension for your boiler?
*
Yes
No
If no, what is the outer diameter of your chimney?
Your answer
Do you have water treatment for your outdoor boiler?
*
(Read this article HERE regarding why water treatment is essential.)
Yes
No
Size of Outdoor Boiler: BTUs
*
Your answer
Size of Outdoor Boiler: Gallons
*
Your answer
How many Buildings to be heated? (more details needed below)
*
Your answer
Underground Insulated PEX Needed: _______ ft.
*
Your answer
Did you purchase an Underground Insulated PEX already? *
Yes
No
# End Caps Needed (Just indicate the number if you already purchased)
*
Every open piece of underground insulated PEX needs to be covered with an end cap. If you
send hot water from the outdoor boiler to a house, and from the outdoor boiler in a
different direction to a workshop, you would answer “4” end caps needed.
Your answer
Will insulated PEX need to pass under any driveways?
(If yes, see special instructions included in your customized design.)
*
Yes
No
Is the system pressurized? (If so, the O2 Barrier PEX Pipe is usually preferred)
*
Yes
No
Please attach a hand-drawn drawing of your desired system. Just show where boiler
sits in reference to home, barn, pool or other structures to be heated. NOT TO SCALE.
Just a simple layout. (If you can't upload here, kindly send to
support@outdoorboiler.com)
Add file
Send also a photo of the back of the boiler where the plumbing will be
connected. (If you can't upload here, kindly send to support@outdoorboiler.com)
Add file
Send a photo of any pumps you already have – show the whole pump, and also take
a close-up photo of the name plate of the pump showing the model number. (If you
can't upload here, kindly send to support@outdoorboiler.com)
Add file
Building #1
Type of Building to be heated (frame home, pole barn, etc.):
*
Your answer
Size of Building in square ft
*
Your answer
Average Ceiling Height
*
Your answer
Insulation Quality
*
Good
Fair
Poor
Do you have fittings to connect the outdoor boiler to the insulated PEX that is
connected to this building? (If not, we will design a complete fittings kit for you.)
*
Yes
No
Do you have a pump to circulate water to this building?
If yes, please send photos of close-up view of pump name plate showing model #.
*
Yes
No
If yes, please send photos of close-up view of pump name plate showing model #.
Add file
Heating System Type in building? (Options include Forced Air, Indoor Boiler, In-floor
Radiant, Baseboard Radiant, etc. Note that if the source is in-floor radiant or the load
is excessive such as for a pool, a TLV kit will need to be in the specifications.
Read HERE why a TLV kit is needed.):
*
Your answer
BTU Capacity/Size of heating system (what is the size of your indoor furnace in BTUs
for example, if known):
*
Your answer
Is the heating system an indoor boiler? These are commonly used with baseboard
radiant heating, for example)? If so, an Indoor Boiler Interface Kit will be included
with your design.
Choose
If the source of heat is forced air with duct work, what size heat exchanger will fit in
your furnace plenum (circle one)
1) 16x18
2) 18x18
3) 20x20
4) 24x24
5) Review standard water to air heat exchanger sizes at this link:
https://outdoorboiler.com/collections/heat-exchangers . Identify which size is
needed – PLEASE FOCUS ON DIMENSIONS “A” and “B” only.
Your answer
If you want to heat this building with a hanging “Unit Heater” (not for use in
residence), we will specify the proper size needed from these options (or
combination thereof):
1) 50k BTU
2) 100k BTU
3) 150k BTU
4) 200k BTU
(See this article for sizing formula HERE)
Your answer
Do you have fittings needed to connect the above heat exchanger to your heating
system?
*
Yes
No
One filter kit is mandatory for every outdoor boiler. It is generally installed in the
basement of the home where it can be monitored and cleaned regularly. Do you
have a high-flow, high-temp spindown filter for this purpose? Yes / No (If no, we will
include customized drawings to install.)
*
Yes
No
Do you want to heat the domestic hot water for this building?
Ye
Yes
Outdoor Boilers must be kept completely full of water – this is mandatory. This can
be accomplished either the hard way (with buckets or a hose), or the easy way (our
proprietary “Fill Kit”). A “Fill Kit” is optional but highly recommended. Since most
outdoor boilers are open to the atmosphere, the Fill Kit allows you to add water by
simply opening a ball valve for a few seconds each month to top off the boiler.
Do you want to add a Fill Kit to your design? Yes / No
*
Yes
No
Is there another Building to be heated?
*
Yes
No
(If yes, please call so that I can send you another sheet for other building to be heated)