ANKUSH KUMAR GAUTAM
BEAT THE BEST OR DIE LIKE THE REST.
HOME
ANKUSH
GOOGLE
Type Any thing
ANKUSH
Showing posts with label mobile. Show all posts
undefined
undefined
China Mobile Secret Codes :
ANKUSH
China Mobile Secret Codes
Default user code : 1122, 3344, 1234, 5678
Engineer mode : *#110*01#
Factory mode : *#987#
Enable COM port : *#110*01# -> Device -> Set UART -> PS Config ->
UART1/115200
Restore factory settings : *#987*99#
LCD contrast : *#369#
Software version : *#800#
Software version : *#900#
Set default language : *#0000# Send
Set English language : *#0044# Send
Set English language (new firmware) : *#001# Send
Default user code : 1122, 3344, 1234, 5678
If anyone knows more china mobile codes, pls let me know.
*#4960# send ----> info
*#3210# send ----> sp lock
*#2820# send ----> version
*73738# send ----> hardware reset
Other codes :
*#2220# send ----> reset to default
*#2634# send ----> unlock gprs settings
*#1110# send ----> special net unlock
*#8140# send ----> net lock
#4960*code# send ----> unlock
#4960*code*code # send ----> unlock
You can try some different engineering modes, below are few list:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set Engineer Mode *888*888#
Set Engineer Mode *#3646633#
Set Engineer Mode ***503#
Well, try the following codes to Reset you china mobile to factory settings:
1. *#987*99#
2. *#77218114#
3. *#881188#
4. *#94267357#
5. *#9426*357#
6. *#19912006#
7. *#118811#
8. *#3646633#
9. *#6804#
2 comments | |
Labels: mobile
undefined
undefined
Nokia Secret codes
ANKUSH
==================================
Nokia Secret Codes
==================================
On the main screen type in:
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the
information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength,
better signal reception. It also help if u want to use GPRS and the service is not
responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase
battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset:
*#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code.
Default lock code is: 12345
Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys)
for 3 seconds, should say pin code. Press C,then press * message should flash,
press * again and 04*pin*pin*pin# \
*#7328748263373738# resets security code.
Default security code is 12345
Change closed caller group (settings >security settings>user groups) to 00000
and ure phone will sound the message tone when you are near a radar speed
trap. Setting it to 500 will cause your phone 2 set off security alarms at shop
exits, gr8 for practical jokes! (works with some of the Nokia phones.) Press and
hold "0" on the main screen to open wap browser.
Code Function
*3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best
sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR)
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but
you should gain approx 30% more Talk Time
*#4720# Deactivate Half Rate Codec
#pw+1234567890+1# Provider Lock Status. (use the “*” button to
“p,w” and “+” symbols)
#pw+1234567890+2# Network Lock Status. (use the “*” button to
“p,w” and “+” symbols)
#pw+1234567890+3# Country Lock Status. (use the “*” button to
“p,w” and “+” symbols)
#pw+1234567890+4# SIM Card Lock Status. (use the “*” button to
“p,w” and “+” symbols)
12345 This is the default security code
obtain the
obtain the
obtain the
obtain the
*#21# Allows you to check the number that “All Calls” are diverted to
*#30# Lets you see the private number
*#43# Allows you to check the “Call Waiting” status of your phone.
*#61# Allows you to check the number that “On No Reply” calls are diverted to
*#62# Allows you to check the number that “Divert If Unreachable (no
service)” calls are diverted to
*#67# Allows you to check the number that “On Busy Calls” are diverted to
*#0000# Displays your phones software version, 1st Line : Software Version,
2nd Line : Software Release Date, 3rd Line : Compression Type
*#9999# Phones software version if *#0000# does not work
*#06# For checking the International Mobile Equipment Identity (IMEI Number)
*#67705646# Removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this
power saving feature “SIM Clock Stop Allowed", it means you will get the best
standby time possible
*#94870345123456789# Deactivate the PWM-Mem
press and hold # Lets you switch between lines
*#7760# Manufacturers code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date,
4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this
mode you need to switch your phone off then on again
**21*number# Turn on “All Calls” diverting to the phone number entered
**61*number# Turn on “No Reply” diverting to the phone number entered
**67*number# Turn on “On Busy” diverting to the phone number entered
Nokia Secret Codes
The complete guide
Here's a list of known codes on Nokia mobile phones. This list does not include
codes that make request to the network. To use these codes, just dial them like
normal numbers.
Code Description
*#06# Display the IMEI (GSM standard)
*#0000# Display the firmware version and date (with variant info on S40
second edition or newer)
*#9990# Says "Bluetooth Test Mode" on Symbian models; accepts without any
messages and Bluetooth behaves abnormally on non-Symbian ones (models
with build-in Bluetooth radio, activate first to use)
*#bta0# Display the Bluetooth MAC address (models with build-in Bluetooth
radio, activate first to show address)
*#mac0wlan# Display the WLAN MAC address (models with build-in Wi-fi radio)
*#opr0logo# Clear the operator logo (3310 and 3330 only)
*#pca0# Activate the GPRS PCCCH support (early GPRS models)
*#pcd0# Deactivate the GPRS PCCCH support (early GPRS models)
*#res0wallet# Reset the mobile wallet (models with mobile wallet)
*#res0# Soft-format the memory (Symbian models only)
*#rst0# Reset to factory defaults, confirmation required (DCT4 or newer)
*#sim0clock# Display the SIM clock status (DCT3 only)
*#ssn0# Display the manufacturing serial number (mid-range and premium
DCT3, basically all DCT4 and BB5 non-Symbian models)
*#war0anty# Display the manufacturing and repair info (no exit on DCT3) or
total talk time on
Symbian models
*efr0# Enable EFR encoding (pre-2003 models)
#efr0# Disable EFR encoding (pre-2003 models)
*hra0# Enable HR encoding (pre-2003 models)
#hra0# Disable HR encoding (pre-2003 models)
#pw+1234567890+n# Display the SIM lock status: (pre-2003 models)
n = 1: provider lock
n = 2: network lock
n = 3: country lock
n = 4: SIM lock
n# n = 1..999: recall the number stored in the SIM location n (DCT3, DCT4,
BB5 models)
These codes will work on most Nokia Mobile Phones to activate/deactivate
advanced hidden functions that you can’t change through the phone menu
One useful function that all Nokia’s I’ve owned have is “Cell Info Display” which
can usually be found in the phones “Display settings” (eg: in a Nokia 1600) or
“Phone Settings” (eg: in a Nokia 3315)
If your network supports it, when “Cell Info Display” is enabled, it will display
the name of the base station your mobile is currently connected to on the
screen. eg: when i’m walking around the city it says “Sydney CBD” and when
i’m at home it displays the name of my suburb.
Note:
To display “p” press “*” three times within one second, To display “w” press “*”
four times within one second, To display “+” press twice “*” within less than a
second
Code Function By Ankush
*3370# / #3370# Activate / Deactivate Enhanced Full Rate Codec (EFR) - Your
phone uses the best sound quality but talk time is reduced my approx. 5%
*#4720# / *#4720# Activate / Deactivate Half Rate Codec - Your phone uses a
lower quality sound but you should gain approx 30% more Talk Time
*#7220# / *#7230# Enable / Disable PCCCPH support (faster GPRS)
#pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the
“p,w” and “+” symbols)
#pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the
“p,w” and “+” symbols)
#pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the
“p,w” and “+” symbols)
#pw+1234567890+4# SIM Card Lock Status. (use the “*” button to obtain the
“p,w” and “+” symbols)
12345 This is the default security code
*#0000# Displays your phones software version, 1st Line : Software Version,
2nd Line : Software Release Date, 3rd Line : Compression Type
*#9999# Phones software version if *#0000# does not work
*#06# For checking the International Mobile Equipment Identity (IMEI Number)
*#67705646# Removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this
power saving feature “SIM Clock Stop Allowed”, it means you will get the best
standby time possible
press and hold # Lets you switch between lines
*#7760# Manufacturers code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date,
4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this
mode you need to switch your phone off then on again
enjoy Hacking(ankush)...
post comment
===================www.ankushgoogle.tk=================
==========
Labels: mobile
1 comments | |
undefined
undefined
MOBILE NUMBER SPOOFING.
ANKUSH
how to hide my mobile number and make free calls to others:
Well, now you can able to hide your original mobile number make free calls to
any one by just visiting this beautiful website given below...
Spoof Card
And one more thing please don't misuse this website...
enjoy Hacking(ankush)...
post comment
Labels: mobile, TRICKS, WEBSITE
0 comments | |
undefined
undefined
FREE AIRTEL SMS CENTER NUMBER
ANKUSH
How to send unlimited free SMS using free SMS center no hack
1.Navigate to Messages option on your mobile and click on Settings
2.Click on Message Center Number and proceed to add a new message center
number.
3.In Message Center Name field, write anything. For an example, “Solid
Blogger”.
4.In the Message Center Number field, write +919810051905
5.Choose Preferred Connection Type as Packet Data
6.Save the message center and activate it from the options.
Now we have configured the message settings to send and receive all message
through an another message center number. But since we have selected Packet
data as connection type, we have to do some additional settings on our phone.
1.Go to your phone menu and navigate to Settings >> Phone Settings >>
Connection >> Packet Data
2.In the settings of packet Data, edit the following options
3.Packet Data Connection >> When available and Access Point >> Airtel Live
4>Save all settings and you are done.
Note : Here we are using a CDMA message center number to send free
messages from Airtel mobile. Since CDMA networks don’t support 91 as the
country code, you have to add 0 before every number. This is very important
and if you make mistake here, this trick will not work.
Example : Suppose you want to send free messages to 9861098610, now while
composing the SMS, type this number as 09861098610 in stead of
919861098610 or +919861098610.
enjoy Hacking(ankush)...
post comment
Labels: mobile
3 comments | |
undefined
undefined
100% WORKING GPRS setting wap-site
ANKUSH
100% Working free airtel browsing websites with free airtel live connection in
your mobile phone 2011:
Airtel free gprs is always available still airtel live facility is available to us,
Yes, it's 100% right...To prove this, here in ankushgoogle.tk &
ankushkr.blogspot.com ,I have given you the lists of websites through which
you can browse and download for FREE of cost in your airtel mobile phone with
the help of FREE airtel live connection...
The following are the websites availalbe for free browsing and downloading in
airtel live connection,
Wap.Setindia.com
Wap.Starboxoffice.com
Wap. In.com
Wap.Ibnlive.com
Wap.Indiatimes.com
Wap.mauj .com
Note: Use this trick when your balance is below Rs.30 paise...
ENJOY HACKING(ankush)..
Labels: mobile
6 comments | |
undefined
undefined
FREE GPRS in BSNL PHONES
ANKUSH
here are the steps to perform:Logic: the server has a major bug in it, by which it fails to block two
simultaneous connections from the phone and establishes a connection with full
internet working,
Supported devices: all phones with multichannel gprs support
For connection on your mobile phone:1) Make two connections like bsnlportal and BSNLPORTAL1
(names of profile don’t matter, u can keep one as billgates and shahrukhkhan
lol..the basic purpose of names is to enable the user to differentiate between
the two accounts,)
2) Select the application you got to have the full connection working on.
Surpassingly “web” now just select “bsnlportal” profile and select a link like
wap.cellone.in the page will get open, just press the red button such that the
“web” application goes in the background.
Make sure that the gprs connection is still established with the web app. Two
parallel lines on the top left of the screen will confirm this
3) Now open any other app that requires web connection like opera. Select
BSNLPORTAL and open any other link like wap.google.com, u will get error –
the aim of using the other app is to perform multi-channel gprs,
this is verified by seeing some dots on the pre-existing connection established
by “web”
(step 2)
“Access denied.
Technical description:
403 Forbidden - You are not allowed to communicate with the requested
resource.”
4) close opera and open web and open a site like esato.com
5) if everything is done as said here then esato will load and voila! We have the
whole internet!
For connection on pc.
1)create a connection and enter the number to be dialed as *99***1#
2) enter the following string as extra initialization command
3)now dial from pc, the connection will be established
4)pick the phone and open “web” open “wap.cellone.in” the phone shows error .
5) close “web” and then from the browser open www.google.com
and voila! The whole intenet is here
settings for profiles
apn: celloneportal
ip: 192.168.51.163
port : 8080
leave other fields blank as they are of the least concern!
the browser settings on pc too go the same as mentioned above!
ENJOY HACKING
POST COMMENTS[ANKUSH]
Labels: mobile
0 comments | |
undefined
undefined
New Airtel Unlimited GPRS Plans(new-many)
ANKUSH
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>
FIRST TRICK[ANKUSH]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>
You need a PC or a Laptop and the required connectivity tools ,ie.,
Serial/USB cable OR Infrared Device OR Bluetooth dongle
1) Activate Airtel Live! ( It’s FREE so no probs)
2) Create TWO Airtel gprs data accounts (yep TWO) and select the
FIRST as the active profile.
3) Connect your mobile to the PC (or Laptop) and install the driver for
your mobile’s modem.
4) Create a new dial-up connection using the NEW CONNECTION
WIZARD as follows
Connecting Device : Your mobile’s modem
ISP Name : Airtel (or anything you like)
Phone Number : *99***2# / Try 99***1
Username and Password : blank
5) Configure your browser and download manager to use the proxy
100.1.200.99 and port 8080.( My advice is to use Opera since you
can browse both wap and regular websites)
6) Connect to the dial-up account. You will be connected at 115.2
kbps (but remember, that is a bad joke).
7) Pick up your mobile and try to access any site. You will get “Access
Denied…”(except for Airtel Live!). IT DOES NOT MATTER.
Keep the mobile down.
8 ) On the PC ( or Laptop) open your browser, enter any address ,
press ENTER and…….WAIT
9) After a few seconds the page will start to load and you have the
WHOLE internet at your disposal. *********
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>
SECOND TRICK[ANKUSH]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>
Under DATA COMM
~~~~~~~~~~~~
APN : airtelfun.com
USERNAME : blank
PASSWORD : blank
PASS REQ : OFF
ALLOW CALLS : AUTOMATIC
IPADDRESS :
DNSADDRESS :
DATA COMP : OFF
HEADER COMP : OFF
Under INTERNET PROFILES
~~~~~~~~~~~~~~~~
INTERNET MODE : HTTP or WAP (both worked for me)
USE PROXY : YES
IP ADDRESS : 100.1.200.99
PORT : 8080
USERNAME :
PASSWORD :
No Risk Here, Try it and Enjoy
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
THIRD TRICK[ANKUSH]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
1st go to settings menu then to connectivity tab now choose the option Data
comm. then "DATA ACCOUNTS" go to new account now the settings r as follows
ACCOUNT TYPE:GPRS
NEW ACCOUNT NAME:A1
APN:airtelfun.com
usr name: (blank)
password: (blank)
now save it
NOW!
go to Internet Setting in connectivity here choose intrnet profile--go to new
profile setting are as below
NAME:A1
CONNECT USING:A1(which was created in data comm.)
save it
now u would be able to see it now selest it and take "more" option then select
setting here in use proxy option it will be selected no if it is no then change it
into yes
now go to proxy adress and give the adress as
100.1.200.99 and then the port number as 8080
Usr name:
password:
now save all the settings u made . come back 2 connectivity
choose streaming settings now in connect using option choose a1 that we
created leave the use proxy option as no itself
THESE R THE SETTINGS
now access airtellive! from ur activated SE phone goto VIDEO GALLERY OR
VIDEO UNLIMITED(varies according to states) choose live streaming then
choose CNBC OR AAJTAK WHILE CONNECTING TO MEDIA SERVER cancel AFTER
9 or 10 sec then type any web adress if it shows access denied then once again
select CNBC and wait for a few more sec than before if its fully connected also
no prob its free then cancel it or if ur connected then stop it and the internet is
ready to take of .GOOD LUCK SE AIRTEL USERS
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>
FOURTH TRICK[ANKUSH]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>
For All Airtel Users
Requirements:
1. Airtel live (available 4 free)
2. Nokia series60 handset eg 6600,6630,n series,7610,6670 etc
3. Opera wap browser 4 mobile
Procedure:1. Go to ur connection settings and make a new internet profile using the
default settings of airtel live. name that new profile as nething(for eg masala);
change the home page of that profile to nething u like for eg www.google.com.
2. Go to ur Opera browser and set the default connection as AIRTEL LIVE. this is
the original settings u received thru airtel.
3. Go to the services(in n6600) and Web(N6630) and change the default profile
for connection as masala (newer one).
**Note: always make sure that ur access point is airtelfun.com
Apply:1. Open Opera and u will see that homepage of Airtel Live is opened. Minimize
the application.
2. Now open web using the duplicate Profile and u will see that two gprs
connections will work simultaneously and at the web or the services page it will
show "Unable to connect" or any error. well thats the signal of ur success.
3. Simply go on the Opera with web on and open any site u want for free. No
Charges No nothing.
U can also use it through ur computer..........
someone said dis too
The main principle behind this is we hav 2 fool the bsnl techies 2 activate portal
and thus get gprs activated / get "G" signal on ur cell as bsnl portal
(wap.cellone.in) needs "gprs signal on ur cel (whether gprs is formaly
activated/registerd or not (by my method )i dont know)
NORMALLY THEY DONT DO THAT INSPITE OF THE FACT THAT THEY SHOULD
ACTIVATE GPRS SIGNAL SERVICE FOR PORTAL!!!
AND THEY WILL GIVE U NO OF REASONS------THAT portal is message based , so go to cellone icon in menu and use that
sms based portal (what the f**k)
---THAT portal service will be activated when u will activate gprs by filling up
form and registering at nearest CCN!!
---THAT ur handset has some problems (if u say that "G" signal is not present)
----etc,etc!!
U HAVE 2 ACTIVATE PORTAL FIRST WHICH IS FREE AND U CAN EAT UP CC'S
FOR THIS REASON!!
SO WHAT U HAV 2 DO IS-1) SEND PORTAL to 3733 AND CONFIRMATION SHD COME WITH 5 MIN ATMAXIMM !!
2) SEND FOR ATLEAST 20-30 TIMES (CAN B ANY MORE THAN THAT)
JUST S**K UP THE NETWORK(3733) WITH THESE MESSAGES !!!
THAT'S FREE NO!! BOTH ON POST AND PRE!!
3) NOW ALONG ALSO SEND 20-40 SMS AS GPRS TO 3733
(NO OF SMS DIRECTLY PROPORTIONAL 2 HATE FOR BSNL AND HOW EARLY U
WNAN GET UR GPRS ACTIVATED) this is also free both on post and pre!!
4) U WILL GET CONFIRMATION IN BOTH CASES AND MSG TELLS U 2 GET
SETTINGS FROM 9400024365, THE NO OF CC!!
HERE AT MY PLACE I CAN DIAL 9419024365 ALSO!
BOTH R TOLL FREE AND BOTH R LOCATED IN CHANDIGARH!!!
(((((((AND SOME OF THE CC'S SAY they cant give such sensitive information
that where they r located, as if thay have a 3 rd world of their own! and the
other dumbs said that they r in chandigarh!!!!)))))
I WOULD ADVISE ALL FIRST, 2 call them once 2 get the settings!!
(most of the times that is incorect but gives u an idea of settings in ur area))
Try and in ur 1 st call only,
talk roughly and tell them u r calling 10-20th time just for settings and is that
their service!!!
5) Now when u get them save them AND plz post them here!!!
6) now GET ATLEAST 2-3 COMPLAINTS REGISTERED( each after 1 day) THAT
UR PORTAL HAS NOT ACTIVATED AND GET THEIR SERIAL NO.
and in the end bombard them abt the status of all those complaints !!
b4 registering ur complaint they will hesitate much and always say taht they
will b sendin new settings which r accurate! but dont belive them and just
register complaints!!
6)AFTER THAT, u have 2 only wait until "G" signal is there on ur screen!!
LOOK, WHAT I HAVE WRIITEN ABV IS METHOD by which i got activated my "G"
service !!! without fillin any form or such and without any money drain!!
may be since it bypasses the formal way of registeration, that is why this trick
is working !!!!!!!!!!!!by Ankush.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>
FIFTH TRICK[ANKUSH]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>
First open ur msg window and type LIVE and send it to 2567 so that after 5 min
u get the setting of Airtel Live or if u have already no need for this procedure.
now then open that setting and copy all the settings from it and create one
access point manually which has all the settings like Airtel Live has.
now only one change will be there and it would be in access point name which
is "Airtelmms.com" instead of originally "Airtelgprs.com".
ok u've done it just active that setting and access free airtel gprs on ur phone.
enjoy hacking .
post comments[ankush]
Labels: mobile
1 comments | |
Home
Older Posts
MY FACEBOOK
MYSELF
ANKUSH
BHOPAL,,
M.P., India
BEAT THE
BEST OR DIE
LIKE THE
REST:
View my complete profile
Labels
CMD (2)
hacking (36)
IP ADDRESS (5)
mobile (7)
password (2)
registry tutorial (3)
SERIAL (14)
SITES (6)
SYSTEM (2)
TRICKS (19)
VIRUS (9)
WEBSITE (11)
Blog Archive
▼ 2012 (3)
▼ April (2)
License Key Code to
Activate Avast 6.0 &
7.0 Antiv...
Avast Internet
Security with Key
Till 13/06/2013
► March (1)
► 2011 (58)
► 2010 (104)
Followers
FLAG COUNTS
Recent Visitors
Large Visitor Globe
my live traffic
.
© ANKUSH KUMAR GAUTAM