September 08 2020 10:15 AM
NO.
SHEET
TITLE
1
TOC
DRAWING INDEX
2
MAT
BASIS OF DESIGN MATERIALS
3
BE-01
EXTERIOR WALL ASSEMBLY
4
BE-02A
TYPICAL WINDOW HEAD
5
BE-02A(ALT)
TYPICAL WINDOW HEAD WITH RETAINER CLIP
6
BE-02B
TYPICAL WINDOW JAMB
7
BE-02C
TYPICAL WINDOW SILL
8
BE-02C(ALT)
ALTERNATE WINDOW SILL
9
BE-03A
WINDOW FLASHING SEQUENCE
10
BE-03B
WINDOW FLASHING SEQUENCE
11
BE-03C
WINDOW FLASHING SEQUENCE
12
BE-03D
WINDOW FLASHING SEQUENCE
13
BE-03E
WINDOW FLASHING SEQUENCE
14
BE-04A
TYPICAL HOLLOW METAL DOOR (HMD) HEAD
15
BE-04B
TYPICAL HOLLOW METAL DOOR (HMD) JAMB
16
BE-04C
TYPICAL HOLLOW METAL DOOR (HMD) SILL
17
BE-05
PACKAGED TERMINAL AIR CONDITIONER
18
BE-06A
WALL MOUNT HEATING/COOLING UNIT - PENETRATION AT HEAD
19
BE-6B
WALL MOUNT HEATING/COOLING UNIT - PENETRATION AT JAMB
ORIGINAL PRINT SIZE: 8.5" x 11"
PLOT DATE:
DRAWING INDEX
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: DRAWING INDEX
DRAWING NO: TOC
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:15 AM
PLOT DATE:
BASIS OF DESIGN MATERIALS
CODE
USE
PRODUCT
DCS
Drainage Course Strips (DCS)
Keene Driwall Rainscreen - 10mm
WRB
Water Resistive Barrier
Tyvek Commercial Wrap
WRB-T
Water Resistive Barrier Tape
Tyvek Tape
SAM
Self Adhered Membrane
3M 3015
IVB
Interior Air/Vapour Barrier
6 Mil Polyethylene
IVB-S
Interior Air/Vapour Barrier Sealant
Chemtron Metaseal
IVB-T
Interior Air/Vapour Barrier Tape
Tuck Tape - Sheathing Tape for Polyethylene Vapour Barrier
WIN-S
Window Perimeter Sealant
Chemtrom Multiseal Silicone Sealant
BR
Backer Rod
Soft Type
FT
Foil Tape
Cantech Aluminum Foil Tape
MFI
Mineral Fibre Insulation
Johns Manville - R-22 Fiberglass Batt
MFL
Metal Flashing
26 Gauge Galvalume Prefinished Metal
Window
All-Weather Windows Alpine 6700, Terra 2700
Hollow Metal Door
Vision Hollow Metal Ltd Thermally Broken Galvannealed Steel
ORIGINAL PRINT SIZE: 8.5" x 11"
HMD
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: MATERIALS INDEX
DRAWING NO: MAT
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
PLOT DATE:
VERTICALLY PROFILED PRE-FINISHED
METAL CLADDING SYSTEM OVER
INTERMITTENT HORIZONTAL
DRAINAGE COURSE (DCS) STRIPS TO
PROVIDE DRAINED AND VENTILATED
RAINSCREEN CAVITY
MECHANICALLY ATTACHED SHEET
APPLIED WATER-RESISTIVE BARRIER
(WRB) MEMBRANE - INSTALL IN
ACCORDANCE WITH MANUFACTURER
GUIDELINES INCLUDING 8" VERTICAL
AND HORIZONTAL LAPS, ALL TAPED
8" TYP.
15/32" ORIENTED STRAND BOARD
SHEATHING OVER 2x6 WOOD
FRAMED WALL
MINERAL FIBRE INSULATION (MFI)
(R-22)
WATER-RESISTIVE BARRIER TAPE
(WRB-T) AT ALL WRB LAPS, SEAMS,
AND TERMINATIONS
6-MIL POLYETHYLENE AIR AND
VAPOUR BARRIER (IVB) MEMBRANE ALL LAPS AND TERMINATIONS TO BE
SEALED WITH CONTINUOUS AIR
BARRIER TAPE (IVB-T) OR ACOUSTICAL
SEALANT (IVB-S)
ORIGINAL PRINT SIZE: 8.5" x 11"
INTERIOR
EXTERIOR
VINYL COATED GYPSUM BOARD
TOTAL EFFECTIVE
CLEAR FIELD R-VALUE:
R-17.4 (Rsi-3.1)
PLAN VIEW
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: EXT. WALL
ASSEMBLY
DRAWING NO: BE-01
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
PLOT DATE:
WINDOW FRAME EXTENSION JOINTS AT
MITERS AND ATTACHMENT TO WINDOW
FRAME TO BE SEALED AIR AND WATER
TIGHT
BE-02A
WINDOW FRAME HEAD, JAMB, AND SILL
ATTACHMENT PER WINDOW
MANUFACTURER
BE-02B
PRIOR TO INSTALLATION, WINDOW
SILL FLANGE NOTCHED FOR
DRAINAGE. 1" NOTCH AT 16" AND
DIRECTLY ADJACENT TO EVERY JAMB
AND VERTICAL MULLION. USE PAN
HEAD SCREWS TO PROVIDE
DRAINAGE GAP BETWEEN NOTCHED
FLANGE AND METAL J-TRIM
MAXIMUM 16" O.C.
INSTALL WINDOW SHIMS PER WINDOW
MANUFACTURER - OFFSET SHIMS FROM
NOTCHES. SHIMS SHOULD NOT BLOCK
DRAINAGE PATH AT NOTCHES AND
SHOULD BE ORIENTED TO DRAIN.
ORIGINAL PRINT SIZE: 8.5" x 11"
BE-02C
ELEVATION VIEW
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: TYPICAL WINDOW
ELEVATION
DRAWING NO: BE-02
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
EXTERIOR
INTERIOR
September 08 2020 10:16 AM
PLOT DATE:
INTERMITTENT DRAINAGE COURSE
(DCS) STRIPS
WATER-RESISTIVE BARRIER (WRB)
CONTINUOUS AIR BARRIER SEALANT
(WIN-S) BETWEEN POLY AND WOOD
FRAMING
WATER-RESISTIVE BARRIER TAPE
(WRB-T)
SELF-ADHERED MEMBRANE (SAM)
FLASHING AT HEAD AND JAMB
FLANGES
METAL J-TRIM WITH DRAINAGE
OPENING AT EITHER END (INSET) - SEE
SHEET BE-03I
PREFINISHED SHEET METAL FLASHING
(MFL) WITH END DAM OVER
WATER-RESISTIVE BARRIER (WRB)
ORIGINAL PRINT SIZE: 8.5" x 11"
WATER-RESISTIVE BARRIER TAPE
(WRB-T)
INTERIOR BACKER ROD (BR) AND AIR
BARRIER SEALANT (WIN-S) JOINT AT
WINDOW PERIMETER - OVERSIZE
BACKER ROD (BR) 25% LARGER THAN
SEALANT GAP
GENERAL NOTE:
SEE WINDOW FLASHING ISOMETRIC
(BE-05 SERIES) FOR MEMBRANE AND
WINDOW INSTALLATION SEQUENCE
SECTION VIEW
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WINDOW HEAD
DRAWING NO: BE-02A
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
EXTERIOR
INTERIOR
September 08 2020 10:16 AM
PLOT DATE:
INTERMITTENT DRAINAGE COURSE
(DCS) STRIPS
WATER-RESISTIVE BARRIER (WRB)
CONTINUOUS AIR BARRIER SEALANT
(WIN-S) BETWEEN POLY AND WOOD
FRAMING
WATER-RESISTIVE BARRIER TAPE
(WRB-T)
SELF-ADHERED MEMBRANE (SAM)
FLASHING AT HEAD AND JAMB
FLANGES
FASTENER PER WINDOW SHOP
DRAWINGS OR WINDOW SUPPLIER
METAL J-TRIM WITH DRAINAGE
OPENING AT EITHER END (INSET) - SEE
SHEET BE-03I
PREFINISHED SHEET METAL FLASHING
(MFL) OVER WATER-RESISTIVE
BARRIER (WRB)
SHEET METAL WINDOW ATTACHMENT
CLIP IN ACCORDANCE WITH WINDOW
MANUFACTURER
ORIGINAL PRINT SIZE: 8.5" x 11"
WATER-RESISTIVE BARRIER TAPE
(WRB-T)
INTERIOR BACKER ROD (BR) AND AIR
BARRIER SEALANT (WIN-S) JOINT AT
WINDOW PERIMETER - OVERSIZE
BACKER ROD (BR) 25% LARGER THAN
SEALANT GAP
GENERAL NOTE:
SEE WINDOW FLASHING ISOMETRIC
(BE-05 SERIES) FOR MEMBRANE AND
WINDOW INSTALLATION SEQUENCE
SECTION VIEW
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WINDOW HEAD
(ALTERNATE)
DRAWING NO: BE-02A(ALT)
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
PLOT DATE:
INTERIOR
INTERIOR BACKER ROD (BR) AND AIR
BARRIER SEALANT (WIN-S) JOINT AT
WINDOW PERIMETER - OVERSIZE
BACKER ROD (BR) 25% LARGER THAN
SEALANT GAP
WATER-RESISTIVE BARRIER (WRB)
SELF-ADHERED MEMBRANE (SAM)
FLASHING AT HEAD AND JAMB
FLANGES - MINIMUM 4" WIDE
ORIGINAL PRINT SIZE: 8.5" x 11"
EXTERIOR
BACKER ROD (BR) AND SEALANT
METAL J-TRIM
GENERAL NOTE:
SEE WINDOW FLASHING ISOMETRIC
(BE-05 SERIES) FOR MEMBRANE AND
WINDOW INSTALLATION SEQUENCE
PLAN VIEW
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WINDOW JAMB
DRAWING NO: BE-02B
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
INTERIOR BACKER ROD (BR) AND AIR
BARRIER SEALANT (WIN-S) JOINT AT
WINDOW PERIMETER - OVERSIZE
BACKER ROD (BR) 25% LARGER THAN
SEALANT GAP
CONTINUOUS SEALANT
PLOT DATE:
CONTINUOUS OSB BACK DAM
BACKER ROD (BR) AND SEALANT
METAL J-TRIM INSTALLED TO THE
UNDERSIDE OF THE WINDOW FRAME
WINDOW SILL FLANGE NOTCHED FOR
DRAINAGE. 1" NOTCH AT 16" AND
DIRECTLY ADJACENT TO EVERY JAMB
AND VERTICAL MULLION. USE PAN
HEAD SCREWS TO PROVIDE
DRAINAGE GAP BETWEEN NOTCHED
FLANGE AND METAL J-TRIM
INTERMITTENT SHIMS IN
ACCORDANCE WITH WINDOW
MANUFACTURER'S REQUIREMENTS
DRAINAGE COURSE (DCS) AT FACE OF
METAL J-TRIM
EXTERIOR
INTERIOR
ORIGINAL PRINT SIZE: 8.5" x 11"
SELF-ADHERED MEMBRANE (SAM)
GENERAL NOTE:
SEE WINDOW FLASHING ISOMETRIC
(BE-05 SERIES) FOR MEMBRANE AND
WINDOW INSTALLATION SEQUENCE
SECTION VIEW
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WINDOW SILL
DRAWING NO: BE-02C
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
INTERIOR BACKER ROD (BR) AND AIR
BARRIER SEALANT (WIN-S) JOINT AT
WINDOW PERIMETER - OVERSIZE
BACKER ROD (BR) 25% LARGER THAN
SEALANT GAP
PLOT DATE:
WINDOW FRAME EXTENSION JOINTS
AT MITERS (BEYOND) AND
ATTACHMENT TO WINDOW FRAME TO
BE SEALED AIR/WATER TIGHT
BACKER ROD (BR) AND SEALANT
METAL J-TRIM INSTALLED TO THE
UNDERSIDE OF THE WINDOW FRAME
WINDOW SILL FLANGE NOTCHED FOR
DRAINAGE. 1" NOTCH AT 16" AND
DIRECTLY ADJACENT TO EVERY JAMB
AND VERTICAL MULLION. USE PAN
HEAD SCREWS TO PROVIDE
DRAINAGE GAP BETWEEN NOTCHED
FLANGE AND METAL J-TRIM
INTERMITTENT SHIMS IN
ACCORDANCE WITH WINDOW
MANUFACTURER'S REQUIREMENTS
DRAINAGE COURSE (DCS) AT FACE OF
METAL J-TRIM
EXTERIOR
INTERIOR
ORIGINAL PRINT SIZE: 8.5" x 11"
SELF-ADHERED MEMBRANE (SAM)
GENERAL NOTE:
SEE WINDOW FLASHING ISOMETRIC
(BE-05 SERIES) FOR MEMBRANE AND
WINDOW INSTALLATION SEQUENCE
SECTION VIEW
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WINDOW SILL
(ALTERNATE)
DRAWING NO: BE-02C(ALT)
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
PLOT DATE:
ORIGINAL PRINT SIZE: 8.5" x 11"
WATER-RESISTIVE BARRIER (WRB)
GUSSET AT HEAD CORNERS
ISOMETRIC VIEW 1 OF 9
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WINDOW INSTALL
SEQUENCE
DRAWING NO: BE-03A
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
ORIGINAL PRINT SIZE: 8.5" x 11"
PLOT DATE:
CUT WRB MEMBRANE AT
WINDOW ROUGH OPENING AT 45
DEGREES FROM ROUGH
OPENING CORNERS - ENSURE
WRB MEMBRANE RETURNS
MATCH ROUGH OPENING DEPTH
ISOMETRIC VIEW 2 OF 9
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WINDOW INSTALL
SEQUENCE
DRAWING NO: BE-03B
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
PLOT DATE:
WATER-RESISTIVE BARRIER TAPE
(WRB-T) AT INTERIOR EDGE OF
WATER-RESISTIVE BARRIER (WRB)
MEMBRANE
FOLD WRB MEMBRANE INTO
ROUGH OPENING AND TAPE TO
POLYETHYLENE SHEET
ORIGINAL PRINT SIZE: 8.5" x 11"
AT SILL, FOLD WRB MEMBRANE
INTO ROUGH OPENING PRIOR TO
INSTALLATION OF OSB BACK DAM
AND TAPE TO TO POLYETHYLENE
SHEET
ISOMETRIC VIEW 3 OF 9
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WINDOW INSTALL
SEQUENCE
DRAWING NO: BE-03C
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
PLOT DATE:
CONTINUOUS OSB BACK DAM
INSTALLED OVER WRB
MEMBRANE (BE-02C)
SELF-ADHERED MEMBRANE (SAM)
SILL FLASHING GUSSET LAPPED
OVER FACE OF WATER-RESISTIVE
BARRIER (WRB)
DEPTH OF SILL
2"
ORIGINAL PRINT SIZE: 8.5" x 11"
3"
4"
TYPICAL SELF-ADHERED
MEMBRANE (SAM) DART AT SILL
CORNERS
ISOMETRIC VIEW 4 OF 9
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WINDOW INSTALL
SEQUENCE
DRAWING NO: BE-03D
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
PLOT DATE:
SELF-ADHERED MEMBRANE (SAM)
SILL TREATMENT PART 1 OF 2
WATER-RESISTIVE BARRIER (WRB)
TAPE AT SKYWARD EDGES OF
SELF-ADHERED MEMBRANE (SAM)
SELF-ADHERED MEMBRANE (SAM)
SILL TREATMENT PART 2 OF 2
INSTALL AIR BARRIER SEALANT
(WIN-S) AT SELF-ADHERED
MEMBRANE (SAM) SEAMS
ORIGINAL PRINT SIZE: 8.5" x 11"
INSTALL CONTINUOUS AIR
BARRIER SEALANT (WIN-S) AT TOP
FACE OF OSB BACK DAM PRIOR
TO WINDOW INSTALLATION
SHIMMING IN ACCORDANCE
WITH WINDOW MANUFACTURER
REQUIREMENTS. ENSURE
UN-OBSTRUCTED DRAINAGE
PATH TO WINDOW FLANGE WEEP
HOLES.
ISOMETRIC VIEW 5 OF 9
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WINDOW INSTALL
SEQUENCE
DRAWING NO: BE-03E
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
PLOT DATE:
ORIGINAL PRINT SIZE: 8.5" x 11"
INSTALL WINDOW FRAME OVER
MEMBRANE PRESTRIPS - SECURE AT
HEAD FLANGES, JAMB FLANGES, AND
SILL BACKDAM PER WINDOW
MANUFACTURER REQUIREMENTS
ISOMETRIC VIEW 6 OF 9
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WINDOW INSTALL
SEQUENCE
DRAWING NO: BE-03F
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
PLOT DATE:
ORIGINAL PRINT SIZE: 8.5" x 11"
SELF-ADHERED MEMBRANE (SAM)
FLASHING AT HEAD AND JAMB FLANGES
ISOMETRIC VIEW 7 OF 9
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WINDOW INSTALL
SEQUENCE
DRAWING NO: BE-03G
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
PLOT DATE:
D
C
A
B
A.
B.
C.
ORIGINAL PRINT SIZE: 8.5" x 11"
D.
ISOMETRIC VIEW 9 OF 9
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WINDOW INSTALL
SEQUENCE
DRAWING NO: BE-03I
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
INSTALL WINDOW HEAD FLASHING
AND WRB TAPE
INSTALL JAMB J-METAL CLOSURE
FOLD HEAD FLASHING END DAM
OVER JAMB J-METAL CLOSURE
INSTALL NOTCHED HEAD J-METAL
OVER HEAD FLASHING
EXTERIOR
INTERIOR
September 08 2020 10:16 AM
PLOT DATE:
WATER-RESISTIVE BARRIER (WRB)
WATER-RESISTIVE BARRIER TAPE
(WRB-T)
SELF-ADHERED MEMBRANE (SAM)
FLASHING AT HEAD AND JAMB
METAL J-TRIM WITH DRAINAGE
OPENING AT EITHER END (INSET)
PREFINISHED SHEET METAL FLASHING
(MFL) WITH END DAM OVER
WATER-RESISTIVE BARRIER (WRB)
ORIGINAL PRINT SIZE: 8.5" x 11"
METAL FLASHING (MFL)
FILL HOLLOW METAL DOOR (HMD)
FRAME WITH MINERAL FIBRE
INSULATION
SELF-ADHERED MEMBRANE (SAM)
FROM VINYL COATED DRYWALL
ONTO WRB FOR AIR BARRIER
TIE-IN
AIR BARRIER SEALANT (WIN-S)
SECTION VIEW
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: HOLLOW METAL
DOOR (HMD) HEAD
DRAWING NO: BE-04A
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
SELF-ADHERED MEMBRANE (SAM)
FROM VINYL COATED DRYWALL
ONTO WRB FOR AIR BARRIER TIE-IN
PLOT DATE:
AIR BARRIER SEALANT (WIN-S)
INTERIOR
HOLLOW METAL DOOR (HMD)
FILL HOLLOW METAL DOOR (HMD)
FRAME WITH MINERAL FIBRE
INSULATION
SELF-ADHERED MEMBRANE (SAM)
FLASHING AT HEAD AND JAMB
WATER-RESISTIVE BARRIER TAPE
(WRB-T)
WATER-RESISTIVE BARRIER (WRB)
ORIGINAL PRINT SIZE: 8.5" x 11"
EXTERIOR
METAL J-TRIM
METAL FLASHING (MFL) - EXTEND
DOWN AND HOOK OVER SILL
FLASHING
PLAN VIEW
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: HOLLOW METAL
DOOR (HMD) JAMB
DRAWING NO: BE-04B
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
CONTINUOUS AIR
BARRIER SEALANT (WIN-S)
AT BACK DAM ANGLE
TIED TO CONTINUOUS
AIR BARRIER SEAL AT
ROUGH OPENING
PERIMETER
PLOT DATE:
SEAL JOINT BETWEEN
THRESHOLD AND BASE
OF DOOR (HMD) FRAME
HOLLOW METAL DOOR
(HMD) SILL SET INTO
INTERMITTENT SHIMS
AND BEADS OF AIR
BARRIER SEALANT (WIN-S)
OVER SELF-ADHERED
MEMBRANE (SAM)
SHEET METAL
FLASHING (MFL)
INSTALLED OVER
INTERMITTENT SHIMS
SELF-ADHERED
FLASHING MEMBRANE
LAPPED FROM METAL
BACK DAM ONTO
WATER-RESISTIVE
BARRIER (WRB)
MEMBRANE
CLADDING SYSTEM
OVER INTERMITTENT
DRAINAGE COURSE
(DCS) STRIPS
ORIGINAL PRINT SIZE: 8.5" x 11"
VINYL SHEET FLOORING
INSTALLED PRIOR TO
THRESHOLD
SECTION VIEW
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: HOLLOW METAL
DOOR (HMD) SILL
DRAWING NO: BE-04C
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
WATER-RESISTIVE BARRIER (WRB)
EXTENDING FROM EXTERIOR
SHEATHING INTO ROUGH OPENING
WATER-RESISTIVE BARRIER TAPE
(WRB-T)
PLOT DATE:
PREFINISHED SHEET METAL FLASHING
(MFL) OVER WATER-RESISTIVE
BARRIER (WRB) - (SIM AT WINDOW
HEAD CONDITIONS BE-02)
SELF-ADHERED MEMBRANE (SAM)
FLASHING AT HEAD AND JAMB
INTERIOR BACKER ROD (BR) AND AIR
BARRIER SEALANT (WIN-S) JOINT AT
DUCT PERIMETER - OVERSIZE BACKER
ROD (BR) 25% LARGER THAN
SEALANT GAP
INTERMITTENT SHIMS OVER SILL
MEMBRANE FOR DRAINAGE AT DUCT
SILL
SLOPE
CAULK ALL PTAC SLEEVE SEAMS AND
BACKER ROD (BR) AND SEALANT
SELF-ADHERED MEMBRANE (SAM)
DRAINAGE COURSE (DCS) AT FACE OF
SILL FLASHING
EXTERIOR
INTERIOR
ORIGINAL PRINT SIZE: 8.5" x 11"
INTERIOR WOOD TRIM, TYP.
NOTE: WRB AND SELF-ADHERED
MEMBRANE (SAM) AT MECHANICAL
WALL PENETRATIONS ARE TO BE
SIMILAR TO WINDOW ROUGH
OPENING
SECTION VIEW
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: PTAC DUCT
PENETRATION
DRAWING NO: BE-05
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
WATER-RESISTIVE BARRIER TAPE
(WRB-T)
PLOT DATE:
September 08 2020 10:16 AM
EXTERIOR
INTERIOR
WATER-RESISTIVE BARRIER (WRB)
CONTINUOUS AIR BARRIER SEALANT
(WIN-S) BETWEEN POLY AND WOOD
FRAMING
PREFINISHED SHEET METAL FLASHING
(MFL)
PREFINISHED SHEET METAL
METAL J-TRIM
TAPE
BUTYL GASKET
PREFINISHED SHEET METAL
FLASHING (MFL) WITH END
DAM
LAG BOLT THROUGH HVAC UNIT
FLANGE
HVAC UNIT
ORIGINAL PRINT SIZE: 8.5" x 11"
METAL SLEEVE WITH JOINTS SEALED
CONTINUOUS TAPE FROM SHEET
METAL SLEEVE TO INTERIOR FINISH
FACER
NOTE: WRB AND SELF-ADHERED
MEMBRANE (SAM) AT MECHANICAL
WALL PENETRATIONS ARE TO BE
SIMILAR TO WINDOW ROUGH
OPENING
SECTION VIEW
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WALL MOUNT AC
UNIT - HEAD
DRAWING NO: BE-06A
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing
September 08 2020 10:16 AM
METAL J-TRIM
METAL J-TRIM SET IN CONTINUOUS
SEALANT OVER PREFINISHED SHEET
METAL
PLOT DATE:
LAG BOLT THROUGH HVAC UNIT
FLANGE
BUTYL GASKET
WATER-RESISTIVE BARRIER (WRB)
EXTERIOR
PREFINISHED SHEET METAL
FOAM GASKET (MANUFACTURER
SUPPLIED)
TAPE
HVAC UNIT
METAL SLEEVE WITH JOINTS SEALED
CONTINUOUS TAPE FROM SHEET
METAL SLEEVE TO INTERIOR FINISH
FACER
INTERIOR
ORIGINAL PRINT SIZE: 8.5" x 11"
CONTINUOUS AIR BARRIER SEALANT
(WIN-S) BETWEEN POLY AND WOOD
FRAMING
NOTE: WRB AND SELF-ADHERED
MEMBRANE (SAM) AT MECHANICAL
WALL PENETRATIONS ARE TO BE
SIMILAR TO WINDOW ROUGH
OPENING
PLAN VIEW
© ATCO STRUCTURES & LOGISTICS LTD.
ALL RIGHTS RESERVED.
THESE DRAWINGS CONTAIN
CONFIDENTIAL INFORMATION AND ARE
THE PROPERTY OF ATCO STRUCTURES &
LOGISTICS LTD. THEY SHALL BE HELD IN
STRICTEST CONFIDENCE AND CANNOT
BE USED, COPIED, REPRODUCED,
DISCLOSED, PUBLISHED, DISTRIBUTED
OR OTHERWISE EXPLOITED, IN ANY
FORM OR MANNER, IN WHOLE OR IN
PART, FOR ANY REASON OTHER THAN
THE REASON FOR WHICH THEY WERE
PROVIDED TO YOU BY ATCO
STRUCTURES & LOGISTICS LTD.,
WITHOUT THE EXPRESS WRITTEN
CONSENT OF ATCO STRUCTURES &
LOGISTICS LTD.
DRAWING TITLE: WALL MOUNT AC
UNIT - JAMB
DRAWING NO: BE-06B
CLIENT: ATCO
0
REV.
2020.
06.02
Issued for Review
RDH
RDH
DATE
DESCRIPTION
BY
CHK.
APP.
PROJECT: ATCO Enclosure
Detailing