Ethafoam 150
Medium Density Polyethylene Foam
Figure 2 – Drop height = 18 in – Multiple drop
100
1 in
1.5 in
2 in
3 in
4 in
G-VALUE (G)
G-VALUE (G)
150
50
0
100
1 in
1.5 in
2 in
3 in
4 in
50
0
2
4
6
8
10
0
12
0
1
2
3
STATIC LOAD (PSI)
Figure 3 – Drop height = 24 in – Multiple drop
G-VALUE (G)
G-VALUE (G)
6
7
8
Figure 4 – Drop height = 30 in – Multiple drop
1 in
1.5 in
2 in
3 in
4 in
50
100
1 in
1.5 in
2 in
3 in
4 in
50
0
1
2
3
4
5
0
6
0
0.5
1
1.5
STATIC LOAD (PSI)
2
2.5
3
3.5
4
4.5
5
STATIC LOAD (PSI)
Figure 5 – Drop height = 36 in – Multiple drop
Figure 6 – Drop height = 42 in – Multiple drop
150
1 in
1.5 in
2 in
3 in
4 in
50
G-VALUE (G)
150
100
0
5
150
100
0
4
STATIC LOAD (PSI)
150
G-VALUE (G)
*Typical values, not product specification limits.
Cushion Curves
*
Figure 1 – Drop height = 12 in – Multiple drop
150
100
1 in
1.5 in
2 in
3 in
4 in
50
0
0.5
1
1.5
2
2.5
STATIC LOAD (PSI)
3
3.5
4
0
0
0.5
1
1.5
2
2.5
STATIC LOAD (PSI)
3
3.5
Foam Description
Ethafoam® plank is a reusable, resilient, high efficiency, low density polyethylene foam packaging
and cushioning material. This product has a broad loading range, making it ideal packaging for a
wide variety of today’s lighter weight, less fragile products.
Test Standard
Caution should be used when comparing cushioning data developed from procedures other than
this specific one (e.g. ASTM D 1596).
Use of Data
Factors such as design, fabrication technique, type of outer container, and package history (e.g.
storage conditions) may influence package performance. Sealed Air Corporation recommends that
all designs be tested for suitability and/or cost improvements.
With 35 packaging labs worldwide, Sealed Air can provide product and package testing. For more
information, please contact your Sealed Air sales representative.
NOTICE: Sealed Air Corporation believes that the information in this brochure is accurate and reliable at the time of publication.
Sealed Air Corporation make no warranties, express or implied, including warranties of merchantability or fitness for a particular
purpose, with respect to any product, information or recommendations referred to herein and shall not be liable for any loss or
damage, directly or indirectly, related to such product or information or for consequential or incidental damages. User should test
each application to determine suitability of the product for intended use.
Sealed Air Specialty Materials
2401 Dillard Street
Grand Prairie, TX 75051 USA
T: 1.866.795.3028
F: 1.864.371.3088
specialtymaterials-na@sealedair.com
Our Products Protect Your Products
Corporate Office Sealed Air Corporation
200 Riverfront Boulevard, Elmwood Park, NJ 07407 www.sealedair.com
Reg. U.S. Pat. & TM Off. © Sealed Air Corporation (US) 2009. All rights reserved. Printed in the U.S.A.
The 9 Dot Logo®, Sealed Air®, Ethafoam® and Our Products Protect Your Products® are registered
trademarks of Sealed Air Corporation (US).
Ethafoam 180
Medium Density Polyethylene Foam
Figure 2 – Drop height = 18 in – Multiple drop
100
1 in
1.5 in
2 in
3 in
4 in
G-VALUE (G)
G-VALUE (G)
150
50
0
100
1 in
1.5 in
2 in
3 in
4 in
50
0
2
4
6
8
10
0
12
0
1
2
3
STATIC LOAD (PSI)
Figure 3 – Drop height = 24 in – Multiple drop
G-VALUE (G)
G-VALUE (G)
6
7
8
Figure 4 – Drop height = 30 in – Multiple drop
1 in
1.5 in
2 in
3 in
4 in
50
100
1 in
1.5 in
2 in
3 in
4 in
50
0
1
2
3
4
5
0
6
0
0.5
1
1.5
STATIC LOAD (PSI)
2
2.5
3
3.5
4
4.5
5
STATIC LOAD (PSI)
Figure 5 – Drop height = 36 in – Multiple drop
Figure 6 – Drop height = 42 in – Multiple drop
150
1 in
1.5 in
2 in
3 in
4 in
G-VALUE (G)
150
100
100
1 in
1.5 in
2 in
3 in
4 in
50
50
0
5
150
100
0
4
STATIC LOAD (PSI)
150
G-VALUE (G)
*Typical values, not product specification limits.
Cushion Curves
*
Figure 1 – Drop height = 12 in – Multiple drop
150
0
0.5
1
1.5
2
2.5
STATIC LOAD (PSI)
3
3.5
4
0
0
0.5
1
1.5
2
2.5
STATIC LOAD (PSI)
3
3.5
Foam Description
Ethafoam® plank is a reusable, resilient, high efficiency, low density polyethylene foam packaging
and cushioning material. This product has a broad loading range, making it ideal packaging for a
wide variety of today’s lighter weight, less fragile products.
Test Standard
Caution should be used when comparing cushioning data developed from procedures other than
this specific one (e.g. ASTM D 1596).
Use of Data
Factors such as design, fabrication technique, type of outer container, and package history (e.g.
storage conditions) may influence package performance. Sealed Air Corporation recommends that
all designs be tested for suitability and/or cost improvements.
With 35 packaging labs worldwide, Sealed Air can provide product and package testing. For more
information, please contact your Sealed Air sales representative.
NOTICE: Sealed Air Corporation believes that the information in this brochure is accurate and reliable at the time of publication.
Sealed Air Corporation make no warranties, express or implied, including warranties of merchantability or fitness for a particular
purpose, with respect to any product, information or recommendations referred to herein and shall not be liable for any loss or
damage, directly or indirectly, related to such product or information or for consequential or incidental damages. User should test
each application to determine suitability of the product for intended use.
Sealed Air Specialty Materials
2401 Dillard Street
Grand Prairie, TX 75051 USA
T: 1.866.795.3028
F: 1.864.371.3088
specialtymaterials-na@sealedair.com
Our Products Protect Your Products
Corporate Office Sealed Air Corporation
200 Riverfront Boulevard, Elmwood Park, NJ 07407 www.sealedair.com
Reg. U.S. Pat. & TM Off. © Sealed Air Corporation (US) 2009. All rights reserved. Printed in the U.S.A.
The 9 Dot Logo®, Sealed Air®, Ethafoam® and Our Products Protect Your Products® are registered
trademarks of Sealed Air Corporation (US).
Ethafoam 180 AS
Medium Density Anti-Static Polyethylene Foam
Figure 2 – Drop height = 18 in – Multiple drop
100
1 in
1.5 in
2 in
3 in
4 in
G-VALUE (G)
G-VALUE (G)
150
50
0
100
1 in
1.5 in
2 in
3 in
4 in
50
0
2
4
6
8
10
0
12
0
1
2
3
STATIC LOAD (PSI)
Figure 3 – Drop height = 24 in – Multiple drop
G-VALUE (G)
G-VALUE (G)
6
7
8
Figure 4 – Drop height = 30 in – Multiple drop
1 in
1.5 in
2 in
3 in
4 in
50
100
1 in
1.5 in
2 in
3 in
4 in
50
0
1
2
3
4
5
0
6
0
0.5
1
1.5
STATIC LOAD (PSI)
2
2.5
3
3.5
4
4.5
5
STATIC LOAD (PSI)
Figure 5 – Drop height = 36 in – Multiple drop
Figure 6 – Drop height = 42 in – Multiple drop
150
1 in
1.5 in
2 in
3 in
4 in
50
G-VALUE (G)
150
100
0
5
150
100
0
4
STATIC LOAD (PSI)
150
G-VALUE (G)
*Typical values, not product specification limits.
Cushion Curves
*
Figure 1 – Drop height = 12 in – Multiple drop
150
100
1 in
1.5 in
2 in
3 in
4 in
50
0
0.5
1
1.5
2
2.5
STATIC LOAD (PSI)
3
3.5
4
0
0
0.5
1
1.5
2
2.5
STATIC LOAD (PSI)
3
3.5
Foam Description
Ethafoam® plank is a reusable, resilient, high efficiency, low density polyethylene foam packaging
and cushioning material. This product has a broad loading range, making it ideal packaging for a
wide variety of today’s lighter weight, less fragile products.
Test Standard
Caution should be used when comparing cushioning data developed from procedures other than
this specific one (e.g. ASTM D 1596).
Use of Data
Factors such as design, fabrication technique, type of outer container, and package history (e.g.
storage conditions) may influence package performance. Sealed Air Corporation recommends that
all designs be tested for suitability and/or cost improvements.
With 35 packaging labs worldwide, Sealed Air can provide product and package testing. For more
information, please contact your Sealed Air sales representative.
NOTICE: Sealed Air Corporation believes that the information in this brochure is accurate and reliable at the time of publication.
Sealed Air Corporation make no warranties, express or implied, including warranties of merchantability or fitness for a particular
purpose, with respect to any product, information or recommendations referred to herein and shall not be liable for any loss or
damage, directly or indirectly, related to such product or information or for consequential or incidental damages. User should test
each application to determine suitability of the product for intended use.
Sealed Air Specialty Materials
2401 Dillard Street
Grand Prairie, TX 75051 USA
T: 1.866.795.3028
F: 1.864.371.3088
specialtymaterials-na@sealedair.com
Our Products Protect Your Products
Corporate Office Sealed Air Corporation
200 Riverfront Boulevard, Elmwood Park, NJ 07407 www.sealedair.com
Reg. U.S. Pat. & TM Off. © Sealed Air Corporation (US) 2009. All rights reserved. Printed in the U.S.A.
The 9 Dot Logo®, Sealed Air®, Ethafoam® and Our Products Protect Your Products® are registered
trademarks of Sealed Air Corporation (US).
Ethafoam 220
Medium Density Polyethylene Foam
Figure 2 – Drop height = 18 in – Multiple drop
100
1 in
1.5 in
2 in
3 in
4 in
G-VALUE (G)
G-VALUE (G)
150
50
0
100
1 in
1.5 in
2 in
3 in
4 in
50
0
2
4
6
8
10
12
0
14
0
1
2
3
STATIC LOAD (PSI)
Figure 3 – Drop height = 24 in – Multiple drop
G-VALUE (G)
G-VALUE (G)
6
7
8
9
Figure 4 – Drop height = 30 in – Multiple drop
1 in
1.5 in
2 in
3 in
4 in
50
100
1 in
1.5 in
2 in
3 in
4 in
50
0
1
2
3
4
5
6
0
7
0
1
2
STATIC LOAD (PSI)
3
4
5
6
STATIC LOAD (PSI)
Figure 5 – Drop height = 36 in – Multiple drop
Figure 6 – Drop height = 42 in – Multiple drop
150
1 in
1.5 in
2 in
3 in
4 in
50
G-VALUE (G)
150
100
0
5
150
100
0
4
STATIC LOAD (PSI)
150
G-VALUE (G)
*Typical values, not product specification limits.
Cushion Curves
*
Figure 1 – Drop height = 12 in – Multiple drop
150
100
1 in
1.5 in
2 in
3 in
4 in
50
0
0.5
1
1.5
2
2.5
3
STATIC LOAD (PSI)
3.5
4
4.5
0
0
0.5
1
1.5
2
2.5
STATIC LOAD (PSI)
3
3.5
4
Foam Description
Ethafoam® plank is a reusable, resilient, high efficiency, low density polyethylene foam packaging
and cushioning material. This product has a broad loading range, making it ideal packaging for a
wide variety of today’s lighter weight, less fragile products.
Test Standard
Caution should be used when comparing cushioning data developed from procedures other than
this specific one (e.g. ASTM D 1596).
Use of Data
Factors such as design, fabrication technique, type of outer container, and package history (e.g.
storage conditions) may influence package performance. Sealed Air Corporation recommends that
all designs be tested for suitability and/or cost improvements.
With 35 packaging labs worldwide, Sealed Air can provide product and package testing. For more
information, please contact your Sealed Air sales representative.
NOTICE: Sealed Air Corporation believes that the information in this brochure is accurate and reliable at the time of publication.
Sealed Air Corporation make no warranties, express or implied, including warranties of merchantability or fitness for a particular
purpose, with respect to any product, information or recommendations referred to herein and shall not be liable for any loss or
damage, directly or indirectly, related to such product or information or for consequential or incidental damages. User should test
each application to determine suitability of the product for intended use.
Sealed Air Specialty Materials
2401 Dillard Street
Grand Prairie, TX 75051 USA
T: 1.866.795.3028
F: 1.864.371.3088
specialtymaterials-na@sealedair.com
Our Products Protect Your Products
Corporate Office Sealed Air Corporation
200 Riverfront Boulevard, Elmwood Park, NJ 07407 www.sealedair.com
Reg. U.S. Pat. & TM Off. © Sealed Air Corporation (US) 2009. All rights reserved. Printed in the U.S.A.
The 9 Dot Logo®, Sealed Air®, Ethafoam® and Our Products Protect Your Products® are registered
trademarks of Sealed Air Corporation (US).
Ethafoam 220 AS
Medium Density Polyethylene Foam
Figure 2 – Drop height = 18 in – Multiple drop
150
100
1 in
1.5 in
2 in
3 in
4 in
G-VALUE (G)
G-VALUE (G)
150
50
0
100
1 in
1.5 in
2 in
3 in
4 in
50
0
2
4
6
8
10
12
0
14
0
1
2
3
STATIC LOAD (PSI)
1 in
1.5 in
2 in
3 in
4 in
G-VALUE (G)
G-VALUE (G)
6
7
8
9
150
100
50
100
1 in
1.5 in
2 in
3 in
4 in
50
0
1
2
3
4
5
6
0
7
0
1
2
STATIC LOAD (PSI)
3
4
5
6
STATIC LOAD (PSI)
Figure 5 – Drop height = 36 in – Multiple drop
Figure 6 – Drop height = 42 in – Multiple drop
150
1 in
1.5 in
2 in
3 in
4 in
50
G-VALUE (G)
150
100
0
5
Figure 4 – Drop height = 30 in – Multiple drop
150
0
4
STATIC LOAD (PSI)
Figure 3 – Drop height = 24 in – Multiple drop
G-VALUE (G)
*Typical values, not product specification limits.
Cushion Curves
*
Figure 1 – Drop height = 12 in – Multiple drop
100
1 in
1.5 in
2 in
3 in
4 in
50
0
0.5
1
1.5
2
2.5
3
STATIC LOAD (PSI)
3.5
4
4.5
0
0
0.5
1
1.5
2
2.5
STATIC LOAD (PSI)
3
3.5
4
Foam Description
Ethafoam® plank is a reusable, resilient, high efficiency, low density polyethylene foam packaging
and cushioning material. This product has a broad loading range, making it ideal packaging for a
wide variety of today’s lighter weight, less fragile products.
Test Standard
Caution should be used when comparing cushioning data developed from procedures other than
this specific one (e.g. ASTM D 1596).
Use of Data
Factors such as design, fabrication technique, type of outer container, and package history (e.g.
storage conditions) may influence package performance. Sealed Air Corporation recommends that
all designs be tested for suitability and/or cost improvements.
With 35 packaging labs worldwide, Sealed Air can provide product and package testing. For more
information, please contact your Sealed Air sales representative.
NOTICE: Sealed Air Corporation believes that the information in this brochure is accurate and reliable at the time of publication.
Sealed Air Corporation make no warranties, express or implied, including warranties of merchantability or fitness for a particular
purpose, with respect to any product, information or recommendations referred to herein and shall not be liable for any loss or
damage, directly or indirectly, related to such product or information or for consequential or incidental damages. User should test
each application to determine suitability of the product for intended use.
Sealed Air Specialty Materials
2401 Dillard Street
Grand Prairie, TX 75051 USA
T: 1.866.795.3028
F: 1.864.371.3088
specialtymaterials-na@sealedair.com
Our Products Protect Your Products
Corporate Office Sealed Air Corporation
200 Riverfront Boulevard, Elmwood Park, NJ 07407 www.sealedair.com
Reg. U.S. Pat. & TM Off. © Sealed Air Corporation (US) 2009. All rights reserved. Printed in the U.S.A.
The 9 Dot Logo®, Sealed Air®, Ethafoam® and Our Products Protect Your Products® are registered
trademarks of Sealed Air Corporation (US).
Ethafoam 400
High Density Polyethylene Foam
Figure 2 – Drop height = 18 in – Multiple drop
100
1 in
1.5 in
2 in
3 in
4 in
G-VALUE (G)
G-VALUE (G)
150
50
0
100
1 in
1.5 in
2 in
3 in
4 in
50
0
2
4
6
8
10
12
14
16
18
0
20
0
2
4
STATIC LOAD (PSI)
Figure 3 – Drop height = 24 in – Multiple drop
G-VALUE (G)
G-VALUE (G)
10
12
14
Figure 4 – Drop height = 30 in – Multiple drop
1 in
1.5 in
2 in
3 in
4 in
50
100
1 in
1.5 in
2 in
3 in
4 in
50
0
1
2
3
4
5
6
7
8
9
0
10
0
1
2
STATIC LOAD (PSI)
3
4
5
6
7
8
STATIC LOAD (PSI)
Figure 5 – Drop height = 36 in – Multiple drop
Figure 6 – Drop height = 42 in – Multiple drop
150
1 in
1.5 in
2 in
3 in
4 in
50
G-VALUE (G)
150
100
0
8
150
100
0
6
STATIC LOAD (PSI)
150
G-VALUE (G)
*Typical values, not product specification limits.
Cushion Curves
*
Figure 1 – Drop height = 12 in – Multiple drop
150
100
1 in
1.5 in
2 in
3 in
4 in
50
0
1
2
3
4
5
STATIC LOAD (PSI)
6
7
0
0
1
2
3
4
STATIC LOAD (PSI)
5
6
Foam Description
Ethafoam® plank is a reusable, resilient, high efficiency, low density polyethylene foam packaging
and cushioning material. This product has a broad loading range, making it ideal packaging for a
wide variety of today’s lighter weight, less fragile products.
Test Standard
Caution should be used when comparing cushioning data developed from procedures other than
this specific one (e.g. ASTM D 1596).
Use of Data
Factors such as design, fabrication technique, type of outer container, and package history (e.g.
storage conditions) may influence package performance. Sealed Air Corporation recommends that
all designs be tested for suitability and/or cost improvements.
With 35 packaging labs worldwide, Sealed Air can provide product and package testing. For more
information, please contact your Sealed Air sales representative.
NOTICE: Sealed Air Corporation believes that the information in this brochure is accurate and reliable at the time of publication.
Sealed Air Corporation make no warranties, express or implied, including warranties of merchantability or fitness for a particular
purpose, with respect to any product, information or recommendations referred to herein and shall not be liable for any loss or
damage, directly or indirectly, related to such product or information or for consequential or incidental damages. User should test
each application to determine suitability of the product for intended use.
Sealed Air Specialty Materials
2401 Dillard Street
Grand Prairie, TX 75051 USA
T: 1.866.795.3028
F: 1.864.371.3088
specialtymaterials-na@sealedair.com
Our Products Protect Your Products
Corporate Office Sealed Air Corporation
200 Riverfront Boulevard, Elmwood Park, NJ 07407 www.sealedair.com
Reg. U.S. Pat. & TM Off. © Sealed Air Corporation (US) 2009. All rights reserved. Printed in the U.S.A.
The 9 Dot Logo®, Sealed Air®, Ethafoam® and Our Products Protect Your Products® are registered
trademarks of Sealed Air Corporation (US).
Ethafoam 600
High Density Polyethylene Foam
Figure 2 – Drop height = 18 in – Multiple drop
150
100
1 in
1.5 in
2 in
3 in
4 in
G-VALUE (G)
G-VALUE (G)
150
50
0
100
1 in
1.5 in
2 in
3 in
4 in
50
0
5
10
15
20
25
0
30
0
2
4
6
STATIC LOAD (PSI)
1 in
1.5 in
2 in
3 in
4 in
G-VALUE (G)
G-VALUE (G)
12
14
16
18
150
100
50
100
1 in
1.5 in
2 in
3 in
4 in
50
0
2
4
6
8
10
12
0
14
0
2
4
STATIC LOAD (PSI)
6
8
10
12
STATIC LOAD (PSI)
Figure 5 – Drop height = 36 in – Multiple drop
Figure 6 – Drop height = 42 in – Multiple drop
150
1 in
1.5 in
2 in
3 in
4 in
50
G-VALUE (G)
150
100
0
10
Figure 4 – Drop height = 30 in – Multiple drop
150
0
8
STATIC LOAD (PSI)
Figure 3 – Drop height = 24 in – Multiple drop
G-VALUE (G)
*Typical values, not product specification limits.
Cushion Curves
*
Figure 1 – Drop height = 12 in – Multiple drop
100
1 in
1.5 in
2 in
3 in
4 in
50
0
1
2
3
4
5
6
STATIC LOAD (PSI)
7
8
9
0
0
1
2
3
4
5
STATIC LOAD (PSI)
6
7
8
Foam Description
Ethafoam® plank is a reusable, resilient, high efficiency, low density polyethylene foam packaging
and cushioning material. This product has a broad loading range, making it ideal packaging for a
wide variety of today’s lighter weight, less fragile products.
Test Standard
Caution should be used when comparing cushioning data developed from procedures other than
this specific one (e.g. ASTM D 1596).
Use of Data
Factors such as design, fabrication technique, type of outer container, and package history (e.g.
storage conditions) may influence package performance. Sealed Air Corporation recommends that
all designs be tested for suitability and/or cost improvements.
With 35 packaging labs worldwide, Sealed Air can provide product and package testing. For more
information, please contact your Sealed Air sales representative.
NOTICE: Sealed Air Corporation believes that the information in this brochure is accurate and reliable at the time of publication.
Sealed Air Corporation make no warranties, express or implied, including warranties of merchantability or fitness for a particular
purpose, with respect to any product, information or recommendations referred to herein and shall not be liable for any loss or
damage, directly or indirectly, related to such product or information or for consequential or incidental damages. User should test
each application to determine suitability of the product for intended use.
Sealed Air Specialty Materials
2401 Dillard Street
Grand Prairie, TX 75051 USA
T: 1.866.795.3028
F: 1.864.371.3088
specialtymaterials-na@sealedair.com
Our Products Protect Your Products
Corporate Office Sealed Air Corporation
200 Riverfront Boulevard, Elmwood Park, NJ 07407 www.sealedair.com
Reg. U.S. Pat. & TM Off. © Sealed Air Corporation (US) 2009. All rights reserved. Printed in the U.S.A.
The 9 Dot Logo®, Sealed Air®, Ethafoam® and Our Products Protect Your Products® are registered
trademarks of Sealed Air Corporation (US).
Ethafoam 900
High Density Polyethylene Foam
Figure 2 – Drop height = 18 in – Multiple drop
100
1 in
1.5 in
2 in
3 in
4 in
G-VALUE (G)
G-VALUE (G)
150
50
0
100
1 in
1.5 in
2 in
3 in
4 in
50
0
5
10
15
20
25
30
35
0
40
0
5
10
STATIC LOAD (PSI)
Figure 3 – Drop height = 24 in – Multiple drop
G-VALUE (G)
G-VALUE (G)
25
30
Figure 4 – Drop height = 30 in – Multiple drop
1 in
1.5 in
2 in
3 in
4 in
50
100
1 in
1.5 in
2 in
3 in
4 in
50
0
2
4
6
8
10
12
14
16
18
0
20
0
2
4
STATIC LOAD (PSI)
6
8
10
12
14
16
STATIC LOAD (PSI)
Figure 5 – Drop height = 36 in – Multiple drop
Figure 6 – Drop height = 42 in – Multiple drop
150
1 in
1.5 in
2 in
3 in
4 in
50
G-VALUE (G)
150
100
0
20
150
100
0
15
STATIC LOAD (PSI)
150
G-VALUE (G)
*Typical values, not product specification limits.
Cushion Curves
*
Figure 1 – Drop height = 12 in – Multiple drop
150
100
1 in
1.5 in
2 in
3 in
4 in
50
0
2
4
6
8
10
STATIC LOAD (PSI)
12
14
0
0
2
4
6
8
STATIC LOAD (PSI)
10
12
Foam Description
Ethafoam® plank is a reusable, resilient, high efficiency, low density polyethylene foam packaging
and cushioning material. This product has a broad loading range, making it ideal packaging for a
wide variety of today’s lighter weight, less fragile products.
Test Standard
Caution should be used when comparing cushioning data developed from procedures other than
this specific one (e.g. ASTM D 1596).
Use of Data
Factors such as design, fabrication technique, type of outer container, and package history (e.g.
storage conditions) may influence package performance. Sealed Air Corporation recommends that
all designs be tested for suitability and/or cost improvements.
With 35 packaging labs worldwide, Sealed Air can provide product and package testing. For more
information, please contact your Sealed Air sales representative.
NOTICE: Sealed Air Corporation believes that the information in this brochure is accurate and reliable at the time of publication.
Sealed Air Corporation make no warranties, express or implied, including warranties of merchantability or fitness for a particular
purpose, with respect to any product, information or recommendations referred to herein and shall not be liable for any loss or
damage, directly or indirectly, related to such product or information or for consequential or incidental damages. User should test
each application to determine suitability of the product for intended use.
Sealed Air Specialty Materials
2401 Dillard Street
Grand Prairie, TX 75051 USA
T: 1.866.795.3028
F: 1.864.371.3088
specialtymaterials-na@sealedair.com
Our Products Protect Your Products
Corporate Office Sealed Air Corporation
200 Riverfront Boulevard, Elmwood Park, NJ 07407 www.sealedair.com
Reg. U.S. Pat. & TM Off. © Sealed Air Corporation (US) 2009. All rights reserved. Printed in the U.S.A.
The 9 Dot Logo®, Sealed Air®, Ethafoam® and Our Products Protect Your Products® are registered
trademarks of Sealed Air Corporation (US).