Stamped Concrete
Before you begin stamping, you should prepare the concrete surface with a release agent. A release
agent can help the concrete stamps to stick to the surface, and also provides the desired color.
Ideally, you should use an agent that is darker than the lighter color of the base. You can then begin
stamping. A tool like a rubber stamp, hammer or concrete stamping tools is all you will require. Press
these tools into concrete in order to make a texture, which allows the colored release agent to
penetrate the surface.
Stenciling concrete is a viable alternative
to stamping concrete. Concrete finishes
that look like stones and wood will take
less effort and take less time to complete.
These finishes are also beautiful for
outdoor use and provide a natural
appearance to concrete slabs. Stamped
concrete uses different colors of powder and kinds of stamps to create unique designs. However, it
works best when applied to flat surfaces. You can apply the stamped concrete Miami over a
previously-poured concrete slab.
Once the surface is ready for stamping, get rid of any surface that is not yet clear, then wash it
thoroughly, and then use an acrylic stamping mat. The next step is to apply a sealant to the
concrete. You can accomplish this by using the sealant. Use an abrasive concrete stamp instead of
your hands to make sure that your stamp is sealed. This will prevent concrete cracking and
deterioration.