How to setup HP Officejet 5255 We will follow some steps for setting up HP Officejet 5255 printer: • First, we will open the box, and then remove the printer, documents, cartridges, and power cords. • Take the printer out of the box. • Remove the end caps, and then remove the plastic bag from around the printer. • Remove all tape from around the printer. • Lift the scanner lid, remove the foam sheet, and then lower the lid. • Now plug in the printer using the supplied power cords, and then turn on the printer. • Now install the cartridges into their correct slot. • Now slide out the paper tray, and then slide the paper guides to their outermost position. • Load a stack of papers into thar without exceeding the maximum fill line. • And then adjust any guides so they rest on the edge of the paper. Your HP Officejet 5255 hardware is now successfully set up. Set up an HP printer and connect it to your wireless home or business network using HP smart. To successfully set up and install your printer gather the following materials and information. • A computer running the latest version of the window that is connected to the wireless network. • An active internet connection. • And a wireless network password or key, if required by your network. Now follow the steps to connect your printer with HP smart: 1. On the welcome screen, select get started. 2. Select the check box to agree to the terms, and then select continue. 3. Now HP smart detects the printers connected to the same network as your Windows computer or in set up mode. 4. Set-up mode activates the first time you turn on your printer. 5. With the printer on the network or in set up mode, return to HP smart and select the plus sign. 6. The app finds the new printers and setup mode and printers connected to your network. 7. Now select your printer, and then select continue. 8. To automatically access your WI-FI password and connect the printer to the network, select continue. 9. HP smart finds the printer, prepares it for the connection, gathers some additional information, and then finishes the connection. 10. With the printer connected to the network, select continue. Now, follow the prompts to finish setting up your printer
