Optical Smoke Detectors
FL5100-600, FL6100-600
• Loop technology with Apollo protocol
• M
ounted almost flush with ceiling
thanks to chamberless technology
• A
ctivation behaviour can be set by
selecting one of five levels
• Sealed electronics
• V
ersions with plastic or stainless steel
faceplate
Description
The Optical Smoke Detector FL5100-600 from the
model range SOTERIA® Dimension operates with a
chamberless detection technology based on the principle of scattered light. Through a combination of 3 infrared LEDs and 2 photo diodes, smoke particles are
detected directly below the detector and are evaluated
as alarm.
With the modern design that is almost flush with the
ceiling, the smoke detector meets even the highest architectural requirements.
The integrated microcontroller evaluates the measured
data and ensures that smoke can be safely distinguished from noise variables. In addition, intelligent evaluation algorithms compensate for the impact of contamination of the light entrance window. In this way, the
response sensitivity of the detector is kept constant
for a long time - a further effective step to avoid false
alarms. Furthermore, the activation behaviour of the
detector can be set on the fire detection control panel
by selecting one of five levels to adjust the detector
optimally to the respective application.
The smoke detector is installed
by means of the plastic hollow
wall box FL5000-200 which also
contains the detector base.
The detector is designed for use
on the loop with Apollo protocol
and is suitable for indoor mounting. The integrated dual-isolator
disconnects the loop in the event
of a short circuit on the loop.
E
2531-CPR-CSP10950
2531-CPR-CSP10952
Building Safety. Building Security.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A COMPANY OF THE LABOR STRAUSS GROUP
WWW.LABORSTRAUSS.COM • ALL RIGHTS AND CHANGES RESERVED
A
FL5100-600-FL6100-600_DBL_LST_EN_2117.PDF • PAGE 1
The Optical Smoke Detector FL6100-600
has the same range of functions as the smoke
detector FL5100-600. However, it has a sturdy
faceplate made of coated stainless steel and
tamper-proof screws, which gives it higher resistance to unauthorized intervention or damage.
Therefore the detector is ideal for use in prisons,
youth centres and health care facilities.
Specifications
Operating voltage
Supply through loop voltage
Current consumption
typ. 1mA (quiescent)
Relative humidity
0 – 95% (no condensation)
Protection class
IP55
Optical Smoke Detector FL5100-600
Ambient temperature
-20°C to +55°C (no icing)
Dimensions Ø × H
140 × 38 (mm)
Thickness of faceplate
5mm
Colour of faceplate
white
Weight
148g
Approvals
VdS G218020
2531-CPR-CSP10950
Order number
241170
Order name
Optical Smoke Detector/Core/ISM FL5100-600
Optical Smoke Detector FL6100-600
Ambient temperature
-40°C to +55°C (no icing)
Dimensions Ø × H
170 × 36.5 (mm)
Colour of faceplate
light grey
Weight
321g
Approvals
VdS G218021
2531-CPR-CSP10952
Order number
241171
Order name
Optical Smoke Detector/Core/ISM FL6100-600
Hollow wall box with detector base
Dimensions Ø × H
132 × 71 (mm)
Ceiling cut-out Ø
min. 114mm
Thickness of inserted ceiling
9 – 40 (mm)
Weight
125g
Order number
246170
Order name
Detector Base/FLx100 FL5000-200
Building Safety. Building Security.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A COMPANY OF THE LABOR STRAUSS GROUP
WWW.LABORSTRAUSS.COM • ALL RIGHTS AND CHANGES RESERVED
A
FL5100-600-FL6100-600_DBL_LST_EN_2117.PDF • PAGE 2