Popular NSE5_FMG-6.4 Exam Questions For
Fortinet NSE 5 - FortiManager 6.4 Exam
Preparation
You can get well-prepared study materials from Killtest to pass NSE5_FMG-6.4 Fortinet
NSE 5 - FortiManager 6.4 certification exam successfully, we have updated the most
popular NSE5_FMG-6.4 exam questions online in pdf format and testing engine for
learning all NSE5_FMG-6.4 questions and answers before attending actual Fortinet
NSE5_FMG-6.4 exam. Candidates can get comprehensive knowledge about NSE 5
Network Security Analyst NSE5_FMG-6.4 real questions that they will face in the final
Fortinet NSE 5 - FortiManager 6.4 certification exam from Killtest NSE5_FMG-6.4 exam
questions. The professional team of Killtest dedicate their efforts and times to collect the
valid NSE5_FMG-6.4 practice exam questions to ensure that you can pass Fortinet NSE
5 - FortiManager 6.4 exam in the first attempt.
Fortinet NSE5_FMG-6.4 Exam Questions OF
Killtest
Exam Code: NSE5_FMG-6.4
Exam Name: Fortinet NSE 5 - FortiManager 6.4
Exam Vendor: Fortinet
Exam Category: NSE 5 Network Security Analyst
Exam Q&As: 59
Exam Language: English
Promotion Coupon: 2020pop
NSE5_FMG-6.4 Fortinet NSE 5 - FortiManager
6.4 Is One OF Fortinet NSE 5 Certification
Exams
Popular NSE5_FMG-6.4 exam questions of Killtest are based on the actual exam
objectives for good preparation. Every candidate needs to know that NSE5_FMG6.4 Fortinet NSE 5 - FortiManager 6.4 certification is one of the Fortinet NSE 5 Network
Security Analyst certification exams. Fortinet NSE 5 Network Security Analyst
designation recognizes your ability to implement network security management and
analytics using Fortinet security devices. There are five Fortinet NSE 5 certification
exams are available currently, candidates are required to pass a minimum of any two of
them:
● Fortinet NSE 5 - FortiAnalyzer (NSE5_FAZ-7.0 Or NSE5_FAZ-6.4)
● Fortinet NSE 5 - FortiClient EMS (NSE5_FCT-7.0 Or NSE5_FCT-6.2)
● Fortinet NSE 5 - FortiEDR (NSE5_EDR-4.2)
● Fortinet NSE 5 - FortiManager (NSE5_FMG-7.0 Or NSE5_FMG-6.4)
● Fortinet NSE 5 - FortiSIEM (NSE5_FSM-5.2)
Among all these Fortinet NSE 5 exams, NSE5_FCT-6.2 will be available until May 31,
2022, both the NSE5_FAZ-6.4 and NSE5_FMG-6.4 will be available until August 31,
2022. So when deciding to take NSE5_FMG-6.4 Fortinet NSE 5 - FortiManager 6.4
exam, candidates need to complete it before August 31, 2022.
As one part of Fortinet NSE 5 Network Security Analyst certification exams, NSE5_FMG6.4 Fortinet NSE 5 - FortiManager 6.4 exam recognizes the certified candidates'
knowledge of and expertise with FortiManager. It is intended for network and security
analysts who are responsible for centralized network administration of many FortiGate
devices using FortiManager to test their applied knowledge of FortiManager
configuration, operation, and day-to-day administration, and includes operational
scenarios, system configuration, device registration, and troubleshooting.
Real NSE5_FMG-6.4 exam is based on FortiManager 6.4.1 and FortiOS 6.4.1. It
contains 35 multiple-choice questions with answering of 70 minutes. In total, it will test
your skills in the following topics:
■ Administration
■ Device Manager
■ Policy and objects
■ Advanced and additional configuration
■ Diagnostics and troubleshooting
Fortinet NSE5_FMG-6.4 practice exam questions with verified answers presented by the
Killtest cover each exa m topic to ensure you can practice NSE5_FMG-6.4 exam well,
and we will help you to prepare and pass the NSE5_FMG-6.4 Fortinet NSE 5 FortiManager 6.4 in the initial attempt with ease.
Check NSE5_FMG-6.4 Free Demo Before Getting
Popular NSE5_FMG-6.4 Exam Questions
Popular NSE5_FMG-6.4 exam questions of Killtest contain the prominent NSE5_FMG6.4 questions with verified answers and present you having a real exam interface and
finding the true NSE5_FMG-6.4 exam makes it a lot more useful for you personally to
pass the Fortinet NSE5_FMG-6.4 exam with far more confidence. To help you check
Fortinet NSE5_FMG-6.4 exam questions, you can read NSE5_FMG-6.4 exam demo
below first:
In the event that the primary FortiManager fails, which of the following actions
must be performed to return the FortiManager HA to a working state?
A. Secondary device with highest priority will automatically be promoted to the primary
role, and manually reconfigure all other secondary devices to point to the new primary
device
B. Reboot one of the secondary devices to promote it automatically to the primary role,
and reconfigure all other secondary devices to point to the new primary device.
C. Manually promote one of the secondary devices to the primary role, and reconfigure
all other secondary devices to point to the new primary device.
D. FortiManager HA state transition is transparent to administrators and does not require
any reconfiguration.
Answer: C
In addition to the default ADOMs, an administrator has created a new ADOM
named Training for FortiGate devices. The administrator sent a device registration
to FortiManager from a remote FortiGate.
Which one of the following statements is true?
A. The FortiGate will be added automatically to the default ADOM named FortiGate.
B. The FortiGate will be automatically added to the Training ADOM.
C. By default, the unregistered FortiGate will appear in the root ADOM.
D. The FortiManager administrator must add the unregistered device manually to the
unregistered device manually to the Training ADOM using the Add Device wizard
Answer: C
An administrator would like to create an SD-WAN using central management in the
Training ADOM.
To create an SD-WAN using central management, which two steps must be
completed? (Choose two.)
A. Specify a gateway address when you create a default SD-WAN static route
B. Enable SD-WAN central management in the Training ADOM
C. Configure and install the SD-WAN firewall policy and SD-WAN static route before
installing the SD-WAN template settings
D. Remove all the interface references such as routes or policies that will be a part of
SD-WAN member interfaces
Answer: B,D
Which two conditions trigger FortiManager to create a new revision history?
(Choose two.)
A. When configuration revision is reverted to previous revision in the revision history
B. When FortiManager installs device-level changes to a managed device
C. When FortiManager is auto-updated with configuration changes made directly on a
managed device
D. When changes to device-level database is made on FortiManager
Answer: B,C
Which configuration setting for FortiGate is part of a device-level database on
FortiManager?
A. VIP and IP Pools
B. Firewall policies
C. Security profiles
D. Routing
Answer: D
An administrator would like to review, approve, or reject all the firewall policy
changes made by the junior administrators.
How should the Workspace mode be configured on FortiManager?
A. Set to workflow and use the ADOM locking feature
B. Set to read/write and use the policy locking feature
C. Set to normal and use the policy locking feature
D. Set to disable and use the policy locking feature
Answer: A
Which two settings must be configured for SD-WAN Central Management?
(Choose two.)
A. SD-WAN must be enabled on per-ADOM basis
B. You can create multiple SD-WAN interfaces per VDOM
C. When you configure an SD-WAN, you must specify at least two member interfaces.
D. The first step in creating an SD-WAN using FortiManager is to create two SD-WAN
firewall policies.
Answer: A,C
When an installation is performed from FortiManager, what is the recovery logic
used between FortiManager and FortiGate for an FGFM tunnel?
A. After 15 minutes, FortiGate will unset all CLI commands that were part of the
installation that caused the tunnel to go down.
B. FortiManager will revert and install a previous configuration revision on the managed
FortiGate.
C. FortiGate will reject the CLI commands that will cause the tunnel to go down.
D. FortiManager will not push the CLI commands as a part of the installation that will
cause the tunnel to go down.
Answer: A
You are moving managed FortiGate devices from one ADOM to a new ADOM.
Which statement correctly describes the expected result?
A. Any pending device settings will be installed automatically
B. Any unused objects from a previous ADOM are moved to the new ADOM
automatically
C. The shared policy package will not be moved to the new ADOM
D. Policy packages will be imported into the new ADOM automaticallyD
Answer: C
What will happen if FortiAnalyzer features are enabled on FortiManager?
A. FortiManager will reboot
B. FortiManager will send the logging configuration to the managed devices so the
managed devices will start sending logs to FortiManager
C. FortiManager will enable ADOMs automatically to collect logs from non-FortiGate
devices
D. FortiManager can be used only as a logging device.
Answer: A
Which two statements about the scheduled backup of FortiManager are true?
(Choose two.)
A. It does not back up firmware images saved on FortiManager.
B. It can be configured using the CLI and GUI.
C. It backs up all devices and the FortiGuard database.
D. It supports FTP, SCP, and SFTP.
Answer: A,D