DESCRIPTION:-
The set-up is a self-contained, water
recirculation unit provided with a top tray, sump tank &
measuring tank. A centrifugal pump is fitted for water
circulation. Flow control valve and bypass valve is fitted
in water line to conduct the experiment at different flow
rates.
Flow rate of water is measured with the help
of measuring tank and stop watch. Water collected on
the top tray from experiment set up can be diverted
toward measuring Tank, with the help of Flow Diverter
(lever L). Separate level indicator and scale is provided
to read the level of water in measuring tank. For mobility
the bench is mounted on wheels.
TECHNICAL SPECIFICATIONS: Top Tray
 Water Circulation
 Measuring Tank
 Sump Tank
 Control Panel
:
:
:
:
:
Stainless Steel, Size 1500 x 1000 x 80 mm
Submersible type corrosion resistant pump
Stainless Steel, Capacity 40 Ltrs.
Capacity 120 Ltrs.
On/Off Switch, Mains Indicator, Water Level Indicator, Flow
Cut valve
UTILITIES REQUIRED:



Water Supply & Drain Require
Power Source : 220 V AC, 50 Hz, single phase
Floor area
: 1.75 m x 1.50 m.
ALL THESE EXPERIMENTS CAN BE PERFORMED ON HYDRAULIC BENCH UNIT
Base Module For Following Experiments In Fluid Mechanics
(I) Principles Of Hydrodynamics
1361 Bernoulli's Principle
1362 Measurement Of Jet Forces
1363 Horizontal Flow From A Tank
1364 Vertical Flow From A Tank
[Type text]
1365 Free & Forced Vortex Apparatus
1366 Osborne Reynolds Experiment
1367 Pitot Static Tube
(II) Principles Of Hydrostatics
1370 Calibration Of Pressure Gauges
1371 Hydrostatic Pressure Apparatus
1372 Stability Of Floating Bodies Apparatus
(III) Open Channel Flow
1375 Plate Weirs
1376 Visualisation Of Streamlines In An Open Channel
(IV) Flow In Pipes
1380 Pipe Friction For Laminar / Turbulent Flow
1381 Losses In A Pipe System
1382 Energy Losses In Piping Elements
1383 Methods Of Flow Measurement
1384 Cavitation Apparatus
(V) Flow Around Bodies
1386 Visualisation Of Streamlines - Hele-Shaw
(VI) Transient Flow
1388 Hydraulic Ram
1389 Pipe Surge & Water Hammer Apparatus
(VII) Fluid Machinery
1391 Centrifugal Pump
1392 Series & Parallel Configuration Of Pumps
1393 Operating Principle Of Pelton Turbine
1394 Operating Principle Of Francis Turbine
The whole Set-up is well designed and arranged in a good quality furnished Structure.
Photograph is only for reference, final product may vary from it.
Specification subject to change without notice. Owing to constant product up-gradation policy.