Course Number: CSPC 114
Course Title: NETWORKS AND COMMUNICATIONS
Instructor: Natalie Rose P. Landicho
Quiz No. 1 - Configuring a Router
Name: [write your name here]
Date: [write date submitted here]
Instructions for the quiz:
Step 1: Open the pkt file that you previously used and verified on the previous Laboratory Activity
(Laboratory Activity 4d). You may also use the file Activity 4.pkt.
Configure S2 with the following parameters:
a. Name device: S2
Command used:
[Paste a screenshot here showing that you have done letter a]
b. Protect access to the console using the letmein password.
Command used:
[Paste a screenshot here showing that you have done letter b]
c. Configure an enable password of c1$c0 and an enable secret password of itsasecret.
Command used:
[Paste a screenshot here showing that you have done letter c]
d. Configure a message to those logging into the switch with the following message:
Authorized access only. Unauthorized access is prohibited and violators
will be prosecuted to the full extent of the law.
Command used:
[Paste a screenshot here showing that you have done letter d]
e. Encrypt all plain text passwords.
Command used:
[Paste a screenshot here showing that you have done letter c]
f. Ensure that the configuration is correct.
Command used:
[Paste a screenshot here showing that you have done letter c]
g. Save the configuration file to avoid loss if the switch is powered down.
Command used:
[Paste a screenshot here showing that you have done letter c]