United Arab Emirates University Department of Mechanical Engineering MECH 315 – Geometric Modelling Fall Semester, 2021-2022. 24 October 2021. Assignment # 4 (Assembly Design) General Guidelines Please carefully read the guidelines before attempting the assignment. ▪ These are two assembly design problems and you are required to model these products as per the provided dimensions. ▪ An exploded view for each product with proper trace lines (aka flow lines), part numbers and bill of materials etc. is also required. ▪ You are also required to create a working drawing packages for these problems. The working drawing should include an assembly drawing, details of all the parts and a standard parts sheet. ▪ The final product should be ready for 3D printing. ▪ Submit the hard copy as well as soft copy. Zips all the files & post them on Blackboard with your name_id as file name. ▪ The homework will be followed by a quiz. ▪ Due date is 31 October, 2021. Engineer Hayder Zulafgar Ali United Arab Emirates University Department of Mechanical Engineering Product # 1: Doubel Bearing United Arab Emirates University Department of Mechanical Engineering Problem#2: Yoke Assembly United Arab Emirates University Department of Mechanical Engineering Thank you