Uploaded by Tomas J.

INTRODUCTION EN

advertisement
This program can test the Chery Auto series models,
including:
Engine, Anti-lock brake, Airbag, Instrument cluster, Body,
Transmission, Immobilizer, Power steering, Door module,
and Trunk control module, etc.
Testable vehicle models:
(The following models covered are only for reference and will
vary constantly with the upgrades of software.)
A11
A15/A15FL
B11FL/B11
S11
T11/T11FL
A21FL/A21
S21FL/S21
S12
M11
M12
S16
A13
A13A
A21FL-C
B16
S15
M16
T21
A19
A16
B14FL
M1A
M16PHEV
T15/T17
A13T
M1D
M1A
Basic functions include:
● Reading ECUs
● Reading DTCs
● Clearing DTCs
● Reading vehicle running data.
Special functions include:
※ PCM (Engine):
● Freeze frame
● Tooth learning
● Write data
● EOBD diagnostic function
● Self adaptive parameter regulation
● Lambda Sensor Monitoring Test Results
● On-Board Monitoring Test Results Mode
● Routine control service
● Cold Start System EOL Inspection
● ECU reset
● VVT function test
※ ABS (Anti-lock Brake System):
● bleeding
● EOL function
● Hydraulic unit test
※ BCM (Body Control Module):
● Key Teach
● CAN Configuration
● CAN Configuration input
● Siren Output Activate
● ECU reset
● Key Teach
● shipping mode
※ TCM (Transmission Control Module):
● Read freezeframe
● Clear adaptation of table
● EOL function
● Routine control service
● EOBD diagnostic function
※ NATS [NISSAN Anti-Theft System]:
● immobilizer adapt
● input code
● Program function
Download