Amplified Design International, Inc.
WHITE
GREY
1. SEPERATE THE CONNECTION OF THE RED AND GRAY WIRES COMING
FROM THE TRANSFOMER (RED AND GRAY WIRES TIED TOGETHER FOR
220VAC OPERATION).
2. CONNECT RED WIRE FROM TRANSFORMER TO "P2" ON THE
POWER SUPPLY PCB. (PURPLE WIRE FROM TRANSFORMER
IS ALSO CONNECTED TO "P2" TERMINAL).
3. CONNECT GRAY WIRE FROM TRANSFORMER TO POWER CORD
WHITE WIRE (POWER CORD WHITE WIRE IS ALSO CONNECTED
TO WHITE WIRE FROM TRANSFORMER).
4. INSTALL A 5 AMP FUSE FOR THE MODEL 400A
INSTALL A 10 AMP FUSE FOR THE MODEL 600A, 600LX
NOTE: WHEN THE OPERATION IS COMPLETED 2 WIRES (RED & PURPLE) WILL BE
CONNECTED TO "P2", AND 2 WIRES (GRAY & WHITE) WILL BE CONNECTED TO
THE AC POWER CORD WHITE WIRE.